IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This should never have been a user-level option, but some people used
it.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13589
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Include an example ctdbd.conf-style file for testing.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13550
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Mon Jul 30 14:30:06 CEST 2018 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13546
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Sat Jul 28 07:26:24 CEST 2018 on sn-devel-144
It is incorrectly says that nodes not in the VNN map can not be
DMASTER.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13499
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Drop function loadconfig(), replacing uses with "load_system_config
ctdb". Drop translation of old-style configuration to new
configuration file. Drop export of debugging variables. Drop
documentation and configuration examples.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Thu May 17 07:03:04 CEST 2018 on sn-devel-144
Minor updates to other manual pages for compatibility.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This documents the new Samba-style configuration file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
All except -i/--interactive. This remaining popt option is now neatly
wrapped to fit in 80 columns.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This must harken back to the days of yore when corrupt persistent
databases were an issue. We haven't seen this used. If CTDB fails to
start due to a corrupt persistent database then this database can be
removed by hand.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These should be done using features provided by the operating system.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Sat May 12 09:13:28 CEST 2018 on sn-devel-144
The existing configuration file is disappearing so these configuration
options need a new home that is not handled by ctdbd_wrapper.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Just document that NAT gateway and LVS are not compatible with this
option. Update the documentation to make it clear that this is a
10.interface option.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB has no business mounting filesystems. Instead, documentation
for the new configuration system will include a recommendation that a
tmpfs be mounted on the volatile database directory.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Volatile databases now have their own subdirectory. This makes things
easier if we later recommend mounting a tmpfs on the volatile database
directory, rather than supporting the current CTDB_DBDIR=tmpfs magic.
No need to create database directories for local daemon tests. ctdbd
will do that.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Test options do not belong in the user documentation. Move them to
the README file in the tests/ subdirectory.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These haven't been used by anyone in a long time. --valgrinding is
less use with CTDB_VALGRINDING now gone.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is too inflexible for general use. There is no use finding a new
home for this in the new configuration scheme.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Notification scripts are installed into $CTDB_BASE/notify.d/ and are
always run by notify.sh. Leave notify.sh where it is for now but no
longer consider it a configuration file. This is an interim measure
and will be changed again soon.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These aren't test options so improve their visibility.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ctdbd -i might be useful with systemd or similar, so should be
documented.
--nosetsched and --script-log-level options are valid user-level
options.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is not used.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Apr 27 09:37:49 CEST 2018 on sn-devel-144
This was recently removed but the documentation was forgotten.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Recently removed but documentation change was forgotten.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB_BASE should only ever be modified by test code. It should not be
mentioned in the user documentation.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Using CTDB_SET_TunableVariables in the main configuration file is no
longer supported.
The only subtlety is an unexpected order change in one of the unit
test results. This is because the old implementation implicitly
sorted the tunable variables via the set command.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Clarify that the global options should be set in the system
configuration file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This seems never to have caught on so reduce complexity.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Tests now deviate from the compile-time default by setting CTDB_BASE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Tests now deviate from the compile-time default by setting CTDB_BASE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The interface must always be specified in the public addresses file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This option adds a lot of unnecessary complexity to scripts.
Configuration should go in $CTDB_BASE, either directly or via a
symlink, so simplify by using the default location.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This was added for a vendor who decided not to use it. It is almost
certainly unused by anyone. If anyone really needs it then it is in
the git history.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the specified file or the default does not exist then log a
warning.
This is done in the takeover code to localise the handling of the
public addresses file. Soon the daemon command-line option will go
away and the takeover code will be replaced in the not too distant
future.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use environment variables for test-only options.
The setenv() can be dropped because the socket location is either the
compile-time default or the already set environment variable.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
