IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Failures are already logged at alert/error level above, so just log
the summary at notice level.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12157
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12151
This was already dropped in commit d678684695.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Wed Aug 17 09:22:13 CEST 2016 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12152
This makes the behaviour of "ctdb addip" similar to "ctdb delip".
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Aug 13 00:55:02 CEST 2016 on sn-devel-144
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Wed Aug 10 08:17:13 CEST 2016 on sn-devel-144
The change to ctdbd.conf and removal of /etc/sysconfig/ctdb as a
configuration file makes RPM rename the latter with a .rpmsave suffix.
This means that a working configuration is moved aside on upgrade and
manual intervention is needed.
Avoid this by convincing RPM that the existing /etc/sysconfig/ctdb is
still a configuration file.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12125
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Mon Aug 8 11:30:58 CEST 2016 on sn-devel-144
The current message is broken:
Control SET_DB_PRIORITY is not implemented any more, use instead
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12126
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Occurs on an invalid line that isn't the first. Isn't really a leak
because it is allocated off mem_ctx, which should be freed by the
caller.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12110
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12123
Although this has been queued for a while, with changes to add stdin
support to the original ctdb tool, this came for free with the
replacement tool.
addtickle and deltickle also now have this feature. However, they're
internal commands and we're not adding new documentation for
internal/debug commands.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12121
If the connection list is empty then process_clist_send() still
creates a request. However, since no subrequests are created for
controls sent, tevent_req_poll() waits forever for an event.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
To create a client process that waits after connect(), instead of trying
to do a blocking write(), go to sleep. The parent can then kill the client
process, once testing is done.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
* Rename to clarify purpose of test
* Simplify test info to avoid unnecessary bit-rot
* Restart after test since test does heavy database manipulation
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Rename to clarify purpose of test
* Simplify test info to avoid unnecessary bit-rot
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Rename to clarify purpose of test
* Simplify test info to avoid unnecessary bit-rot
* Have fetch_ring print PNN for clearer output and update patterns in
test script to suit
* Simplify sanity checking pattern due to less data because of
--interactive/-i option
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Rename to clarify purpose of test
* Simplify test info to avoid unnecessary bit-rot
* Have message_ring print PNN for clearer output and update patterns
in test script to suit.
* Drop quantitative percentage check since this is hard to predict
when under extreme load. To compensate, tighten up expectations for
the total number of messages in each direction: at least 10 messages
are required over 10 seconds.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
On a busy system the backgrounded counter reset can survive into the
next test and interfere with its result.
To avoid this, wait until all forks of 01.reclock exit before
continuing on to the next test.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Mon Aug 1 17:53:27 CEST 2016 on sn-devel-144
With some compilers and picky compiler settings, ignoring the return
value of fgets() can cause compilation to fail.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
EUID is bash-only, so this condition always fails on other shells.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
struct ctdb_dbid has padding and needs to be initialized.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
These were used in serial recovery and for restoring databases using
older ctdb tool. New code uses database specific transaction controls.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This control was used by the older implementation of tool to restore a
database from backup. In the new implemenation of tool, it freezes and thaws
only the database being restored.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
New tool breaks some of the tool unit tests due to improved error
messages. Those changes are in the following patch.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Removing and adding replacement code makes the commits cleaner.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This drastically simplifies the code. "ctdb reloadips" behaves the
same, since it causes a takeover run immediately after IPs are
deleted. "ctdb delip" now needs to be followed with an explicit "ctdb
ipreallocate".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This avoids CTDB spending too much time processing multiple packets and
return to the event loop sooner.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This controls the maximum size of data ctdb will read from sockets at
a time.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
... to check if only the addresses are the same.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
RELEASE_IP sometimes times out because killing TCP connections can
take a long time.
The aim of the takeover timeout is actually to limit the total amount
of time for an IP takeover run. So, calculate a combined timeout
offset once and use it for each of the RELEASE_IP, TAKEOVER_IP,
IPREALLOCATED stages. This gives RELEASE_IP more time to kill TCP
connections but still limits the total time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
