IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
* is_trusted_domain() is broken without winbind. Still working on this.
* get_global_sam_name() should return the workgroup name unless we
are a standalone server (verified by volker)
* Get_Pwnam() should always fall back to the username (minus domain name)
even if it is not our workgroup so that TRUSTEDOMAIN\user can logon
if 'user' exists in the local list of accounts (on domain members w/o
winbind)
Tested using Samba PDC with trusts (running winbindd) and a Samba 3.0
domain member not running winbindd.
notes: make_user_info_map() is slightly broken now due to the
fact that is_trusted_domain() only works with winbindd. disabled
checks temporarily until I can sort this out.
(This used to be commit e1d6094d06)
object files for modules are in .po files, while object files for
static use are in .o files. Pointed out by metze.
This reduces the number of files that have to be recompiled after the Makefile
changes. Preventing unnecessary recompiling of the other few is high
on my todo list.
(This used to be commit b9b46d43c7)
*) consolidates the dc location routines again (dns
and netbios) get_dc_list() or get_sorted_dc_list()
is the authoritative means of locating DC's again.
(also inludes a flag to get_dc_list() to define
if this should be a DNS only lookup or not)
(however, if you set "name resolve order = hosts wins"
you could still get DNS queries for domain name IFF
ldap_domain2hostlist() fails. The answer? Fix your DNS
setup)
*) enabled DOMAIN<0x1c> lookups to be funneled through
resolve_hosts resulting in a call to ldap_domain2hostlist()
if lp_security() == SEC_ADS
*) enables name cache for winbind ADS backend
*) enable the negative connection cache for winbind
ADS backend
*) removes some old dead code
*) consolidates some duplicate code
*) moves the internal_name_resolve() to use an IP/port pair
to deal with SRV RR dns replies. The namecache code
also supports the IP:port syntax now as well.
*) removes 'ads server' and moves the functionality back
into 'password server' (which can support "hostname:port"
syntax now but works fine with defaults depending on
the value of lp_security())
(This used to be commit d7f7fcda42)
groupmap'. The correct way to implement this stuff is via a function
table, as exampled in all the other parts of 'net'.
This also moves the idmap code into a new file. Volker, is this your
code? You might want to put your name on it.
Andrew Bartlett
(This used to be commit 477f2d9e39)
This replaces the universal group caching code (was originally
based on that code). Only applies to the the RPC code.
One comment: domain local groups don't show up in 'getent group'
that's easy to fix.
Code has been tested against 2k domain but doesn't change anything
with respect to NT4 domains.
netsamlogon caching works pretty much like the universal group
caching code did but has had much more testing and puts winbind
mostly back in sync between branches.
(This used to be commit aac01dc7bc)
fails to build on a ton of platforms as it completely bypasses all of
our portability code.
if you want it then use 'make bin/editreg'. If some distros want to
add that to their spec files then thats up to them, but we really
can't have non-portable code unconditionally built in our main tree.
(This used to be commit 3c66111f32)
* remove 'winbind uid' and 'winbind gid' parameters (replaced
by current idmap parameter)
* create the sambaUnixIdPool entries automatically in the 'ldap
idmap suffix'
* add new 'ldap idmap suffix' and 'ldap group suffix' parametrer
* "idmap backend = ldap" now accepts 'ldap:ldap://server/' format
(parameters are passed to idmap init() function
(This used to be commit 1665926281)
Includes sambaUnixIdPool objectclass
Still needs cleaning up wrt to name space.
More changes to come, but at least we now have a
a working distributed winbindd solution.
(This used to be commit 8241758544)
- Use absolute directories for $builddir and $srcdir in the Makefile
- Don't try and combine source files in $builddir and $srcdir to build
proto.h. It's just too hard to get it right across all targets we
wish to compile on. Use a hand created prototype for the single
function in smbd/build_options.c that we need. This allows us to ditch
all the extra sed work that was causing problems: \t not portable - hah!
- Fix bogus delheaders target to remove the correct files
This appears to work quite nicely now. Let's see how it goes on the
buildfarm machines.
(This used to be commit 456184463d)
We really need idmap_ldap to have a good solution with ldapsam, porting
it from the prvious code is beeing made, the code is really simple to do
so I am confident it is not a problem to commit this code in.
Not committing it would have been worst.
I really would have been able to finish also the group code, maybe we can
put it into a followin release after 3.0.0 even if it may be an upgrade
problem.
The code has been tested and seem to work right, more testing is needed for
corner cases.
Currently winbind pdc (working only for users and not for groups) is
disabled as I was not able to make a complete group code replacement that
works somewhat in a week (I have a complete patch, but there are bugs)
Simo.
(This used to be commit 0e58085978)
1. Allows to change quota settings for shared mount points from Win2K and WinXP from Explorer properties tab
2. Disabled by default and when requested, will be probed and enabled only on Linux where it works
3. Was tested for approx. two weeks now on Linux by two independent QA teams, have not found any bugs so far
Documentation to follow
(This used to be commit 4bf022ce9e)
source file. I will be making changes to sock_exec to work on VOS, which
has a blocking connect() call, but first I want to get it in its own source
file so that it can be called from a test program.
(This used to be commit 10bf65d335)
build options, so we will always have the right values for how and when
an smbd was built.
In particular, this is indended to address bitrot caused by configure.in
changes.
Andrew Bartlett
(This used to be commit 2be258071c)
This includes the 'SIDs Rule' patch, mimir's trusted domains cacheing code,
the winbind_idmap abstraction (not idmap proper, but the stuff that held up
the winbind LDAP backend in HEAD).
Andrew Bartlett
(This used to be commit d4d5e6c2ee)
Need to check on where the privilege code is sitting
and update the docs.
Examples:
root# bin/net help groupmap
net groupmap add
Create a new group mapping
net groupmap modify
Update a group mapping
net groupmap delete
Remove a group mapping
net groupmap list
List current group map
# bin/net groupmap add
Usage: net groupmap add rid=<int> name=<string> type=<domain|local|builtin> [comment=<string>]
# bin/net groupmap delete
Usage: net groupmap delete name=<string|SID>
# bin/net groupmap modify
Usage: net groupmap modify name=<string|SID> [comment=<string>] [type=<domain|local>
(This used to be commit f2fd0ab41f)
- whitespace syncup
- winbind nss client cleanups
- new rpc echo pipe
- prettier warnings for out of date autoconf scripts
(This used to be commit bb812d1670)
Small clenaup patches:
- safe_string.h - don't assume that __FUNCTION__ is available
- process.c - use new workaround from safe_string.h for the same
- util.c - Show how many bytes we smb_panic()ed trying to smb_xmalloc()
- gencache.c - Keep valgrind quiet by always null terminating.
- clistr.c - Add copyright
- srvstr.h - move srvstr_push into a .c file again, as a real function.
- srvstr.c - revive, with 'safe' checked srvstr_push
- loadparm.c - set a default for the display charset.
- connection.c - use safe_strcpy()
Andrew Bartlett
(This used to be commit c91e76bddb)
- pdb_guest (including change defaults)
- 'default' passdb actions (instead of 'not implemented' stubs in each module)
- net_rpc_samsync no longer assumes pdb_unix
Andrew Bartlett
(This used to be commit 4bec53c8c8)
This patch catches up on the rest of the work - as much string checking
as is possible is done at compile time, and the rest at runtime.
Lots of code converted to pstrcpy() etc, and other code reworked to correctly
call sizeof().
Andrew Bartlett
(This used to be commit c5b604e2ee)
- NTLMSSP over SPENGO (sesssion-setup-and-x) cleanup and code refactor.
- also consequential changes to the NTLMSSP and SPNEGO parsing functions
- and the client code that uses the same functions
- Add ntlm_auth, a NTLMSSP authentication interface for use by applications
like Squid and Apache.
- also consquential changes to use common code for base64 encode/decode.
- Winbind changes to support ntlm_auth (I don't want this program to need
to read smb.conf, instead getting all it's details over the pipe).
- nmbd changes for fstrcat() instead of fstrcpy().
Andrew Bartlett
(This used to be commit fbb46da79c)
*sync up configure.in
*don't build torture tools in make all
*make sure to remove torture tools as part of make clean
(This used to be commit 0fb724b321)
>Add -a flag to setup.py when making python_clean. This will delete the
>python compiled binaries and .so files rather than only the temporary
>compile directory.
>
>This fixes a PSA build bug.
Merge from HEAD, Revision 1.587:
>Link less with smbmnt and smbumount. Also change from a pstrcpy() to a
>strncpy() to make it clear that we must operate on a PATH_MAX sized buffer.
>
>Andrew Bartlett
Plus some bits from the AC_SUBST target cleanup that got missed last time
I ran dirdiff.
(This used to be commit 9b94c82958)
- Target selection cleanup
- Some formatting merges
- Merged some Pythong bits&pieces that were missed previously
Original commit message for target selection cleanup:
>Here's a bit of a cleanup of the {configure,Makefile}.in files. I've
>now combined all the ad-hoc AC_SUBST variables into three generalised
>ones:
>
> EXTRA_BIN_PROGS Additional programs to install in ${prefix}/sbin
> EXTRA_SBIN_PROGS Additional programs to install in ${prefix}/bin
> EXTRA_ALL_TARGETS Additional targets to build by default
> SHLIB_PROGS Shared library objects (pam, winbind) to build
>
>We also build some extra stuff by default: the python extensions (if
>--with-python specified), smbmount related binaries (if
>--with-smbmount specified), and the samba torture suite.
>
>The idea behind this is to have everything that is configured built by
>default to detect breakage as soon as possible when people make low
>level changes.
(This used to be commit 6000caf5da)
* updating Makefile & configure script to use CONFIGDIR & VFSLIBDIR
* set LIBDIR to ${prefix}/lib/samba when --with-fhs is enabled
* make installdirs take an arbitrary number of arguements
(This used to be commit f0d09cf676)
* fixing change notify on print server handle
* adding change notify support into smbcontrol for sending comment
changes, etc...
All part of CR 1159/1160
(This used to be commit f1062e79de)
- Fix segfaults in the 'net ads' commands when no password is provided
- Readd --with-ldapsam for 2.2 compatability. This conditionally compiles the
old options, but the actual code is available on all ldap systems.
- Fix shadow passwords (as per work with vl)
- Fix sending plaintext passwords to unicode servers (again vl)
- Add a bit of const to secrets.c functions
- Fix some spelling and grammer by vance.
- Document the -r option in smbgroupedit.
There are more changes in HEAD, I'm only merging the changes I've been involved
with.
Andrew Bartlett
(This used to be commit 83973c3893)
the hash for this scheme is *much* larger (approximately 31 bits) and
the code is written to be very fast, correctly handling multibyte
while not doing any actual multi-byte conversions in the vast majority
of cases
you can select this scheme using "mangling method = hash2", although I
may make it the default if it works out well.
(This used to be commit bb173c1a7e)
mangling implementation, selectable using "mangling method = " in smb.conf
It also tidies the interface a little, although it is still nasty.
(This used to be commit be23d87a17)
directory so we don't keep getting these stupid error messages about
incorrect size for valid.dat upcase.dat and lowcase.dat
(This used to be commit 4af0c7a93f)
does not imply that all source will be rebuilt when prototypes change,
merely that the prototypes will be updated.
make proto, clean, delheaders, headers, etc all behave equivalently to
before.
Intended new behaviour for proto.h, whenever source is being
compiled:
If proto.h does not exist, it is built.
If any source files have changed since proto.h was last checked
(.proto.check), then proto.h is checked. If there are no actual
changes since last time, its mtime is not changed, but we do
remember the time at which it was checked.
Whenever we try to build a .o, we need to check the headers are up
to date. However, rebuilding the prototypes does not imply
rebuilding all object files.
Also to allow people to build on machines without Awk, we never try
to use it unless a source file has changed. I guess if we wanted,
we could have lack of Awk only cause a warning, not failure.
The point of all of this is to be easier on people who don't
understand or forget to type "make proto", and to reduce the chance of
build breakage by having prototypes out of sync.
I also rolled back JF's changes to put proto.h into builddir rather
than srcdir. There are good arguments in both directions, but since
we keep proto.h in CVS, it seems important that the up-to-date copy by
in srcdir where it can be checked back in. If people are fussed about
having srcdir be readonly you could change this -- but since proto.h
is only rebuilt when there are changes, it's not a big deal.
I also fixed an apparent race condition in "make headers" that would
make it unsafe if you did 'make -j2', and made 'make clean' not kill
proto.h, since people may not be able to rebuild it.
I reckon there's nothing gnumake-specific here but we shall see.
I also have this great idea about rewriting libtool in C++...
(This used to be commit 8a61a810e5)
into its own. The 'installdirs' makefile entry didn't do anything on my laptop,
so it has been replaced with the section from installbin.sh.
This also fixes the bug that we ignored the setting of $(PRIVATEDIR) when
making the directories.
Finally, link pam_winbind with .po objects only, not a mix of .o and .po
(as per Don Mccall's request).
Andrew Bartlett
(This used to be commit c7a883df28)
<a.kotovich@sam-solutions.net> that adds the security decsriptor code
for ADS workstation accounts
thanks for your patience Cat, and thanks to Andrew Bartlett for
extensive reviews and suggestions about this code.
(This used to be commit 6891393b5d)
when complete, this will be used to backup critical tdbs at samba
startup and possibly periodically while Samba is running so that if
tdb corruption is caused by a power failure Samba can restore from the
backup.
(This used to be commit f619330082)
This allow the user to select
'passdb backend = plugin : /path/to/plugin.so : pluging args'
And load any arbitary plugin. Apparently Jelmer has a mysql plugin in the
works - hence this patch.
We probably need to rework the interface a bit before 3.0 (add versioning of
some kind) but this is a good start.
Andrew Bartlett
(This used to be commit d6d18b70f0)
This adds code to do generic PAM -> NTSTATUS and NTSTATUS -> PAM error
conversions, and uses them to make the error handling in pam_winbind sane.
In particular, pam_winbind now uses PAM error codes, not silly '-1, -2 ...'
stuff, and logs the NTSTATUS error that winbind now sends over the pipe.
Added code to wbinfo to display these - makes a big difference in debugging
winbindd.
The main change here is the code to allow pam_winbind password changing to
correctly stack - This code ripped from pam_unix, and the copyright attached.
(Same as for all pam modules, including pam_winbind)
Andrew Bartlett
(This used to be commit dc1a72f896)
automatically generated on first 'make'. This wasn't being picked up by the
build farm becouse of the explicit 'make proto'.
The 'make proto' bit isn't somthing our alpha testers know about (its certainly
not clearly documented) and its meant to be automatic.
I hope this works...
Andrew Bartlett
(This used to be commit 3a413ef1ea)
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c5)
Samba (ab)uses the returns from getpwnam() a lot - in particular it keeps
them around for a long time - often past the next call...
This adds a getpwnam_alloc and a getpwuid_alloc to the collection.
These function as expected, returning a malloced structure that can be
free()ed with passwd_free(&passwd).
This patch also cuts down on the number of calls to getpwnam - mostly by
taking advantage of the fact that the passdb interface is already
case-insensiteve.
With this patch most of the recursive cases have been removed (that I know
of) and the problems are reduced further by not using the sys_ interface
in the new code. This means that pointers to the cache won't be affected.
(This is a tempoary HACK, I intend to kill the password cache entirly).
The only change I'm a little worried about is the change to
rpc_server/srv_samr_nt.c for private groups. In this case we are getting
groups from the new group mapping DB. Do we still need to check for private
groups? I've toned down the check to a case sensitve match with the new code,
but we might be able to kill it entirly.
I've also added a make_modifyable_passwd() function, that copies a passwd
struct into the form that the old sys_getpw* code provided. As far as I can
tell this is only actually used in the pass_check.c crazies, where I moved
the final 'special case' for shadow passwords (out of _Get_Pwnam()).
The matching case for getpwent() is dealt with already, in lib/util_getent.c
Also included in here is a small change to register the [homes] share at vuid
creation rather than just in one varient of the session setup. (This picks
up the SPNEGO cases). The home directory is now stored on the vuid, and I
am hoping this might provide a saner way to do %H substitions.
TODO: Kill off remaining Get_Pwnam_Modify calls (they are not needed), change
the remaining sys_getpwnam() callers to use getpwnam_alloc() and move
Get_Pwnam to return an allocated struct.
Andrew Bartlett
(This used to be commit 1d86c7f942)
This work was sponsored by Optifacio Software Services, Inc.
Andrew Bartlett
(various e-mails announcements merged into some form of commit message below:)
This patch which adds basics of universal groups support
into Samba 3. Currently, only Winbind with RPC calls supports this, ADS
support requires additional (possibly huge) work on KRB5 PAC. However,
basic infrastructure is here.
This patch adds:
1. Storing of universal groups for particular user logged into Samba
software (smbd/ two winbind-pam methods) into netlogon_unigrp.tdb as array
of uint32 supplemental group rids keyed as DOMAIN_SID/USER_RID in tdb.
2. Fetching of unversal groups for given user rid and domain sid from
netlogon_unigrp.tdb.
Since this is used in both smbd and winbindd, main code is in
source/lib/netlogon_uingrp.c. Dependencies are added to AUTH_OBJ as
UNIGRP_OBJ and WINBINDD_OBJ as UNIGRP_OBJ.
This patch has had a few versions, the final version in particular:
Many thanks to Andrew Bartlett for critics and comments, and partly
rewritten code.
New:
- updated fetching code to changed byte order macros
- moved functions to proper namespace
- optimized memory usage by reusing caller's memory context
- enhanced code to more follow Samba coding rules
Todo:
- proper universal group expiration after timeout
(This used to be commit 80c2aefbe7)
The auth_authsupplied_info typedef is now just a plain struct - auth_context,
but it has been modified to contain the function pointers to the rest
of the auth subsystem's components.
(Who needs non-static functions anyway?)
In working all this mess out, I fixed a number of memory leaks and moved the
entire auth subsystem over to talloc().
Note that the TALLOC_CTX attached to the auth_context can be rather long-lived,
it is provided for things that are intended to live as long. (The
global_negprot_auth_context lasts the whole life of the smbd).
I've also adjusted a few things in auth_domain.c, mainly passing the domain as
a paramater to a few functions instead of looking up lp_workgroup(). I'm
hopign to make this entire thing a bit more trusted domains (as PDC) freindly
in the near future.
Other than that, I moved a bit of the code around, hence the rather messy diff.
Andrew Bartlett
(This used to be commit 12f5515f55)
Also removed the dependency on auth_util.o, which makes things nicer.
Finally, this kills off the NECESSARY_BECAUSE_SAMBA_DEPENDENCIES_ARE_SO_BROKEN_OBJ
makefile variable - becouse Samba dependencies are starting to be sane again!
Andrew Bartlett
(This used to be commit 4609edcac3)
- Move rpc_client/cli_trust.c to smbd/change_trust_pw.c
- It hasn't been used by anything else since smbpasswd lost its -j
- Add a TALLOC_CTX to the auth subsytem. These are only valid for the length
of the calls to the individual modules, if you want a longer context hide it
in your private data.
Similarly, all returns (like the server_info) should still be malloced.
- Move the 'ntdomain' module (security=domain in oldspeak) over to use the new
libsmb domain logon code. Also rework much of the code to use some better
helper functions for the connection - getting us much better error returns
(the new code is NTSTATUS).
The only remaining thing to do is to figure out if tpot's 0xdead 0xbeef for
the LUID feilds is sufficient, or if we should do random LUIDs as per the old
code.
Similarly, I'll move winbind over to this when I get a chance.
This leaves the SPOOLSS code and some cli_pipe code as the only stuff still in
rpc_client, at least as far as smbd is concerned.
While I've given this a basic rundown, any testing is as always appriciated.
Andrew Bartlett
(This used to be commit d870edce76)
We now include the libber.h file if required, but currently we just don't use
ldap. (I'll chase this up).
In the meantime, I've moved the ads_status code about, its now in its own file,
and has a couple of #ifdefs to allow smbd to link - becouse the lack of LDAP
caused HAVE_ADS to be undefined. (I hope its not too ugly).
Andrew Bartlett
(This used to be commit 14407c87e2)
nsswitch code uses vsyslog without checking for it.
Provide replacement for vsyslog in lib/snprintf if not found by configure.
Jeremy.
(This used to be commit ab2e55cdb3)
a SMB server
particularly useful for ADS is:
net time set -S DOMAIN#1B
this makes kerberos clock skew problems go away :)
(This used to be commit b3ba2293d0)
- added lsaquerysecobj to rpcclient
- renamed querysecobj to samquerysecobj
- removed duplicated display_sec_acl() code from cmd_spoolss.c and
cmd_samr.c and moved it into display_sec.c
(This used to be commit 59b2e3f408)
it gets removed on a make clean
it gets created on a make headers (if it doesn't already exist)
This makes it so I only rebuild everthing once after a make clean and
also so nothing gets rebuilt after jfm does a make headers (proto)
(This used to be commit bc918bce10)
This moves the rest of the functionality into the 'net rpc join' code.
Futhermore, this moves that entire area over to the libsmb codebase, rather
than the crufty old rpc_client stuff.
I have also fixed up the smbpasswd -a -m bug in the process.
We also have a new 'net rpc changetrustpw' that can be called from a
cron-job to regularly change the trust account password, for sites
that run winbind but not smbd.
With a little more work, we can kill rpc_client from smbd entirly!
(It is mostly the domain auth stuff - which I can rework - and the
spoolss stuff that sombody else will need to look over).
Andrew Bartlett
(This used to be commit 575897e879)
This kills off the offending code in smbpasswd -j -Uab%c
In the process we have changed from unsing compelatly random passwords
to random, 15 char ascii strings. While this does produce a decrese in
entropy, it is still vastly greater than we need, considering the application.
In the meantime this allows us to actually *type* the machine account
password duruign debugging.
This code also adds a 'check' step to the join, confirming that the
stored password does indeed do somthing of value :-)
Andrew Bartlett
(This used to be commit c0b7ee6ee5)
You can change them with either usermanager->policies->account
or from a command prompt on NT/W2K: net accounts /domain
we can add a rpc accounts to the net command. As the net_rpc.c is still
empty, I did not start. How should I add command to it ? Should I take the
rpcclient/cmd_xxx functions and call them from there ?
alse changed the SAM_UNK_INFO_3 parser, it's an NTTIME. This one is more
for jeremy ;-)
J.F.
(This used to be commit bc28a8eebd)
This time, all the existing functionality has been moved into
'net rap', ready for new commands in the 'net ads' and 'net rpc' categories.
In particular, we hope to have the abilty to autoselect the appropriate
backend to use based on smb.conf or other paramaters.
This will allow 'net user' to work no matter what the remote server.
The new 'net rpc' command will soon gain a 'net rpc join' and a
'net rpc user' based on the existing samba code.
Also in this commit, the connection establishment code has been almost entirly
reworked, and now has some minor sense of sainity to it.
In particular, we can now connect to hosts *other* than localhost!
We also have the ability to state on a per-command basis whether the 'localhost'
is a sane default value. (A net join, for example, would not be sane against
localhost).
Unfortunetly we have had to make the basic paramaters global variables, but
the 'cli' is not opened and closed on a per-command basis.
Andrew Bartlett
(This used to be commit 8739d426ca)
also created winbindd_rpc.c which contains the functions that
have been converted to the new structure. There will soon be
a winbindd_ads.c for the ldap backend
(This used to be commit e4ccc602ba)
This allows us to use automagically obtained values in future, and the value
from krb5.conf now.
Also fix mem leaks etc.
Andrew Bartlett
(This used to be commit 8f9ce71781)
subdirectory.
(The insertion of these files was done with some CVS backend magic, hence the
lack of a commit message).
This also moves libsmb/domain_client_validate.c back into auth_domain.c,
becouse we no longer share it with winbind.
Andrew Bartlett
(This used to be commit 782835470c)
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a)
All this stuff was being pulled in due to *one* unneeded call to
fetch a domain SID which smbpasswd already puts in the database...
Jeremy.
(This used to be commit 6bf2505cce)
Satyr framework from the buildfarm. This will eventually be copied
into the Samba source tree, but it is not yet. See
cvs://samba.org:/data/cvs/satyr
Add "make showlayout" target to show where installation will put
things.
(This used to be commit 7b5b5693f4)
pam authentication. This allows us to link in less other crap.
Authenticating with a challenge/response doesn't seem to work though - we
always get back NT_STATUS_WRONG_PASSWORD.
(This used to be commit d85aa1ce83)
code.
In particular this assists tpot in some of his work, becouse it provides the
connection between the authenticaion and the vuid generation.
Major Changes:
- Fully malloc'ed structures.
- Massive rework of the code so that all structures are made and destroyed
using malloc and free, rather than hanging around on the stack.
- SAM_ACCOUNT unix uids and gids are now pointers to the same, to allow them
to be declared 'invalid' without the chance that people might get ROOT by
default.
- kill off some of the "DOMAIN\user" lookups. These can be readded at a more
appropriate place (probably domain_client_validate.c) in the future. They
don't belong in session setups.
- Massive introduction of DATA_BLOB structures, particularly for passwords.
- Use NTLMSSP flags to tell the backend what its getting, rather than magic
lenghths.
- Fix winbind back up again, but tpot is redoing this soon anyway.
- Abstract much of the work in srv_netlog_nt back into auth helper functions.
This is a LARGE change, and any assistance is testing it is appriciated.
Domain logons are still broken (as far as I can tell) but other functionality
seems
intact.
Needs testing with a wide variety of MS clients.
Andrew Bartlett
(This used to be commit f70fb819b2)
I understand that Vance is reworking the build_options stuff, so maybe we can
have better way of regenerating this in future.
Andrew Bartlett
(This used to be commit a228e9b39f)
