IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Ensure we don't use any of the create_options for Samba private
use. Add a new parameter to the VFS_CREATE call (private_flags)
which is only used internally. Renumber NTCREATEX_OPTIONS_PRIVATE_DENY_DOS
and NTCREATEX_OPTIONS_PRIVATE_DENY_FCB to match the S4 code).
Rev. the VFS interface to version 28.
Jeremy.
The "lock spin time" parameter mimics the following Windows
setting which by default is 250ms in Windows and 200ms in Samba.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\LockViolationDelay
When a client sends repeated, non-blocking, contending BRL requests
to a Windows server, after the first Windows starts treating these
requests as timed blocking locks with the above timeout.
As an efficiency, I've changed the behavior when this setting is 0,
to skip this logic and treat all requests as non-blocking locks.
This gives the smbd server behavior similar to the 3.0 release with
the do_spin_lock() implementation.
I've also changed the blocking lock parameter in the call from
push_blocking_lock_request() to true as all requests made in this
path are blocking by definition.
There is a codepath missing to propagate back error returns from the rmdir
POSIX call inside close_directory when delete on close is set. This means doing
an rmdir on a Windows command line will always report success, even when the
directory was not deleted. This fix adds that codepath back into Samba.
Jeremy.
Start migrating uses of reply_doserror() to reply_nterror() with the
correct mapping. Eventually we'll get to the point where we can
change reply_doserror() to force a DOS error code on the wire,
and can change calls to reply_nterror(req, NT_STATUS_DOS()) - which *does*
force DOS errors on the wire - to reply_doserror(). Which might
actually make the server code look like it's making sense.
Jeremy.
This looks innocent, but it is visible in a netbench run. Due to boolean
short-circuiting we don't have to execute the conditions on the right-hand side
of the &&. So putting the less likely condition left gains a bit.
in the "user.DOSATTRIB" EA. From the docs:
In Samba 3.5.0 and above the "user.DOSATTRIB" extended attribute has been extended to store
the create time for a file as well as the DOS attributes. This is done in a backwards compatible
way so files created by Samba 3.5.0 and above can still have the DOS attribute read from this
extended attribute by earlier versions of Samba, but they will not be able to read the create
time stored there. Storing the create time separately from the normal filesystem meta-data
allows Samba to faithfully reproduce NTFS semantics on top of a POSIX filesystem.
Passes make test but will need more testing.
Jeremy.
We were treating a file time set on close as a sticky write time set, and I don't
think it is. I will add a torture test later to RAW-CLOSE to confirm this.
Jeremy.
"Normal" non truncate writes always cause the timestamp to
be set on close. Once a close is done on a handle this can
reset the sticky write time to current time also.
Updated smbtorture4 confirms this.
Jeremy.
This vop is designed to work in tandem with SMB_VFS_READDIR to allow
vfs modules to make modifications to arbitrary filenames before
they're consumed by callers. Subsequently the core directory
enumeration code in smbd is now changed to free the memory that may be
allocated in a module. This vop enables the new version of catia in
the following patch.
Signed-off-by: Tim Prouty <tprouty@samba.org>
W2K3 DC's can have IPv6 addresses but won't serve
krb5/ldap or cldap on those addresses. Make sure when
we're asking for DC's we prefer IPv4.
If you have an IPv6-only network this prioritizing code
will be a no-op. And if you have a mixed network then you
need to prioritize IPv4 due to W2K3 DC's.
Jeremy.
This patch also changes the unix convert flags to make sure the
correct semantics are preservered for allowing/disallowing wildcards
in the last component of the path.
This often times means explicitly denying certain operations on a stream
as they are not supported or don't make sense at a particular level. At
some point in the future these can be enabled, but for now it's better to
remove ambiguity
The values of vuid and tid were not being correctly updated in the struct smb_request
when passed to chain_reply inside sessionsetupX and tconX.
Jeremy.
create time from the existing timestamps (for systems
that need to do this). Once the write time is changed
via a sticky write, the create time might need to be
recalculated. To do this I needed to add a bool into
struct stat_ex to remember if the st_ex_btime field
was calculated, or read from the OS. Also fixed the
returning of modified write timestamps in the return
from NTCreateX, SMBattr and SMBattrE (which weren't
taking into account the modified timestamp stored
in the open file table). Attempting to fix an issue
with Excel 2003 and offline files. Volker and Metze,
please review.
Jeremy
SMB_VFS_CHFLAGS isn't actually getting the smb_filename struct for now
since it only operates on the basefile. This is the strategy for all
path-based operations that will never actually operate on a stream.
By clarifying the meaning of path based operations that don't take an
smb_filename struct, modules that implement streams such as vfs_onefs
no longer need to implement SMB_VFS_CHFLAGS to ensure it's only called
on the base_name.
This patch introduces two new temporary helper functions
vfs_stat_smb_fname and vfs_lstat_smb_fname. They basically allowed me
to call the new smb_filename version of stat, while avoiding plumbing
it through callers that are still too inconvenient. As the conversion
moves along, I will be able to remove callers of this, with the goal
being to remove all callers.
There was also a bug in create_synthetic_smb_fname_split (also a
temporary utility function) that caused it to incorrectly handle
filenames with ':'s in them when in posix mode. This is now fixed.
Fix a couple more unix_convert uses to filename_convert.
Fix bug in acl_group_override() where an uninitialized
struct could be used. Move unix_convert with wildcard
use in SMBsearch reply to boilerplate code.
Jeremy.
resolve_dfspath() -> unix_convert() -> get_full_smb_filename() -> check_name()
with a new function filename_convert().
This restores the check_name() calls that had gone missing
since the default create_file was changed. All "standard"
pathname processing now goes through filename_convert().
I'll take a look at the non-standard pathname processing
next. As a benefit, fixed a missing resolve_dfspath()
in the trans2 mkdir call.
Jeremy.
Some of the callers required minimal changes, while others
(copy_internals) required significant changes. The task is simplified
a little bit because we are able to do operations and checks on the
base_name when a stream isn't used.
This patch should cause no functional changes.
Volker, Jeremy: Please check
This patch introduces
struct stat_ex {
dev_t st_ex_dev;
ino_t st_ex_ino;
mode_t st_ex_mode;
nlink_t st_ex_nlink;
uid_t st_ex_uid;
gid_t st_ex_gid;
dev_t st_ex_rdev;
off_t st_ex_size;
struct timespec st_ex_atime;
struct timespec st_ex_mtime;
struct timespec st_ex_ctime;
struct timespec st_ex_btime; /* birthtime */
blksize_t st_ex_blksize;
blkcnt_t st_ex_blocks;
};
typedef struct stat_ex SMB_STRUCT_STAT;
It is really large because due to the friendly libc headers playing macro
tricks with fields like st_ino, so I renamed them to st_ex_xxx.
Why this change? To support birthtime, we already have quite a few #ifdef's at
places where it does not really belong. With a stat struct that we control, we
can consolidate the nanosecond timestamps and the birthtime deep in the VFS
stat calls.
At this moment it is triggered by a request to support the birthtime field for
GPFS. GPFS does not extend the system level struct stat, but instead has a
separate call that gets us the additional information beyond posix. Without
being able to do that within the VFS stat calls, that support would have to be
scattered around the main smbd code.
It will very likely break all the onefs modules, but I think the changes will
be reasonably easy to do.
This is the first of a series of patches that change path based
operations to operate on a struct smb_filename instead of a char *.
This same concept already exists in source4.
My goals for this series of patches are to eventually:
1) Solve the stream vs. posix filename that contains a colon ambiguity
that currently exists.
2) Make unix_convert the only function that parses the stream name.
3) Clean up the unix_convert API.
4) Change all path based vfs operation to take a struct smb_filename.
5) Make is_ntfs_stream_name() a constant operation that can simply
check the state of struct smb_filename rather than re-parse the
filename.
6) Eliminate the need for split_ntfs_stream_name() to exist.
My strategy is to start from the inside at unix_convert() and work my
way out through the vfs layer, call by call. This first patch does
just that, by changing unix_convert and all of its callers to operate
on struct smb_filename. Since this is such a large change, I plan on
pushing the patches in phases, where each phase keeps full
compatibility and passes make test.
The API of unix_convert has been simplified from:
NTSTATUS unix_convert(TALLOC_CTX *ctx,
connection_struct *conn,
const char *orig_path,
bool allow_wcard_last_component,
char **pp_conv_path,
char **pp_saved_last_component,
SMB_STRUCT_STAT *pst)
to:
NTSTATUS unix_convert(TALLOC_CTX *ctx,
connection_struct *conn,
const char *orig_path,
struct smb_filename *smb_fname,
uint32_t ucf_flags)
Currently the smb_filename struct looks like:
struct smb_filename {
char *base_name;
char *stream_name;
char *original_lcomp;
SMB_STRUCT_STAT st;
};
One key point here is the decision to break up the base_name and
stream_name. I have introduced a helper function called
get_full_smb_filename() that takes an smb_filename struct and
allocates the full_name. I changed the callers of unix_convert() to
subsequently call get_full_smb_filename() for the time being, but I
plan to eventually eliminate get_full_smb_filename().
These were found interally via code inspection.
1) fake_sendfile was incorrectly writing zeros over real data on a
short read.
2) sendfile_short_send was doing 4 byte writes instead of 1024 byte
writes due to an incorrect sizeof usage.
Jermey, Vl please check
This is fun -- XP still does this :-)
netbios retarget : foo = 192.168.234.10:1139
and if you connect to port 139 name foo, XP will happily do SMB over 1139
This allows sendfile implementations that are atomic to avoid having
to send zeros or kill the client connection on a short read (usually
the file was truncated).
This patch adds 3 new VFS OPs for Windows byte range locking: BRL_LOCK_WINDOWS,
BRL_UNLOCK_WINDOWS and BRL_CANCEL_WINDOWS. Specifically:
* I renamed brl_lock_windows, brl_unlock_windows and brl_lock_cancel to
*_default as the default implementations of the VFS ops.
* The blocking_lock_record (BLR) is now passed into the brl_lock_windows and
brl_cancel_windows paths. The Onefs implementation uses it - future
implementations may find it useful too.
* Created brl_lock_cancel to do what brl_lock/brl_unlock do: set up a
lock_struct and call either the Posix or Windows lock function. These happen
to be the same for the default implementation.
* Added helper functions: increment_current_lock_count() and
decrement_current_lock_count().
* Minor spelling correction in brl_timeout_fn: brl -> blr.
* Changed blocking_lock_cancel() to return the BLR that it has cancelled. This
allows us to assert its the lock that we wanted to cancel. If this assert ever
fires, this path will need to take in the BLR to cancel, rather than choosing
on its own.
* Adds a small helper function: find_blocking_lock_record_by_id(). Used by the
OneFS implementation, but could be useful for others.
By default this VFS call is a NOOP, but the onefs vfs module takes advantage
of it to initialize direntry search caches at the beginning of each
TRANS2_FIND_FIRST, TRANS2_FIND_NEXT, SMBffirst, SMBsearch, and SMBunique
* VFS_OP_READDIR can now provide stat information, take advantage of it
if it's available
* is_visible_file(): optimistically expect the provided stat buffer is
already valid
* dptr_ReadDirName(): refactor code for easier readability, functionality
is the same
This replaces release_level2_oplocks_on_change with
contend_level2_oplock_begin/end in order to contend level2 oplocks
throughout an operation rather than just at the begining. This is
necessary for some kernel oplock implementations, and also lays the
groundwork for better correctness in Samba's standard level2 oplock
handling. The next step for non-kernel oplocks is to add additional
state to the share mode lock struct that prevents any new opens from
granting oplocks while a contending operation is in progress.
All operations that contend level 2 oplocks are now correctly spanned
except for aio and synchronous writes. The two write paths both have
non-trivial error paths that need extra care to get right.
RAW-OPLOCK and the rest of 'make test' are still passing with this
change.
This changelist allows for the addition of custom performance
monitoring modules through smb.conf. Entrypoints in the main message
processing code have been added to capture the command, subop, ioctl,
identity and message size statistics.
Reported by Kukks. Make sure we correctly use LSTAT in all cases where
POSIX pathnames are being used. This matters when dealing with symlinks
pointing to invalid paths being renamed or deleted not all deletes and
renames are done via an nt_create open.
Jeremy.
1) Add in smb_file_time struct to clarify code and make room for createtime.
2) Get and set create time from SMB messages.
3) Fixup existing VFS modules + examples Some OS'es allow for the
setting of the birthtime through kernel interfaces. This value is
generically used for Windows createtime, but is not settable in the
code today.
This replaces the is_dos_path bool with a more future-proof argument.
The next step is to plumb INTERNAL_OPEN_ONLY through this flag instead
of overridding the oplock_request.
