IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
AFP_BackupTime value must be 0x80000000 and all existing defines use
native byte order, not byte swapped.
Signed-off-by: Ralph Boehme <rb@sernet.de>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Aug 12 02:21:32 CEST 2014 on sn-devel-104
This removes the messaging_backend abstraction layer from messages_dgm.c. That
layer was introduced for ctdb and is still used there. But as the messaging_dgm
interface is very slim anyway, I don't think directly calling it is too bad.
Why this commit? It is another step towards making messages_dgm
independent of messages.[ch], thus it might become usable in other
contexts like ctdb and source4
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Rename smbcontrol's dgm-cleanup to msg-cleanup. We haven't published
this UI yet :-)
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This avoids calling messaging_dispatch_rec directly from messaging_dgm.c
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This prepares the structures for multi-channel support.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Ensure lpcfg_parm_struct, its counterpart is equivalent
Change-Id: I127ce5d3cf7fe02ebf161aa011ec3b41bc32a656
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Change-Id: I0736a3b9b73aa80f529327ec70e856dd7fc008c6
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
It is not used any more.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Jul 24 14:23:11 CEST 2014 on sn-devel-104
This is generic enough that it could be used in all code.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Fri Jul 18 15:43:33 CEST 2014 on sn-devel-104
This will allow winbindd to know when we are an RODC
without needing to dig into sam.ldb.
Change-Id: Ibdfa37fe6269305ccc5db42479f4a8db5eea53f3
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Nadezhda Ivanova <nivanova@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Jun 18 21:17:57 CEST 2014 on sn-devel-104
This patch seems odd, but the pdb_samba_dsdb module has exactly this
semantics. That is, the pdb_samba_dsdb is responsible for all IDMAP
values, due to backing on to the idmap.ldb allocator. This option is
added so we can continue to support the mappings written into that
database even when switching winbindd implementations - the source4/
winbind code would only ask the idmap_ldb code, no matter what the
SID.
Almost all of the behaviour for this is already in winbindd, but we
need this extra flag function so as to avoid (currently intentional)
errors at startup due to not having a per-domain allocation
configured in the smb.conf.
Andrew Bartlett
Change-Id: I6b0d7a1463fe28dfd36715af0285911ecc07585c
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Kamen Mazdrashki <kamenim@samba.org>
This adds in flags that allow winbindd to request authentication
without directly calling into the auth_sam module.
That in turn will allow winbindd to call auth_samba4 and so permit
winbindd operation in the AD DC.
Andrew Bartlett
Change-Id: I27d11075eb8e1a54f034ee2fdcb05360b4203567
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
some of the code in afs.c is needed by wbinfo that lives in the toplevel
nsswitch directory, so move the afs.c file to a new top-level lib/afs
directory. Use the name afs_funcs to avoid collisions with the afs.h
header from OpenAFS
Signed-off-by: Christian Ambach <ambi@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Change-Id: I987aa533ebe11c93b9e836fafc7b19c81bf600a5
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This also changes the layering
messaging_send_iov -> messaging_send_buf -> messaging_send
to
messaging_send_buf -> messaging_send -> messaging_send_iov
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Mathias Dietz <mdietz@de.ibm.com>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Thu May 22 18:37:27 CEST 2014 on sn-devel-104
This will allow new tests to be written to validate winbindd authentication results
Andrew Bartlett
Change-Id: I008eba1de349b17ee4eb9f11be08338557dffecc
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This delegates the decision whether to read a message to a callback
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This call is never made in the code and should in fact crash if it was ever called with a valid boolean
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-on: https://gerrit.samba.org/106
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
messaging_read_send/recv was okay for just one handler in the queue. For
multiple handlers it was pretty broken.
A handler that deletes itself as part of the callback (pretty typical use
case...) drops the message for a subsequent handler that responds to the same
message type. In messaging_dispatch_rec we walk the array, however
messaging_read_cleanup has already changed the array. tevent_req_defer_callback
does not help here: It only defers the callback, it does not defer the cleanup
function.
This also happens when a callback deletes a different handler
A handler that re-installs itself in the callback might get a message twice.
This patch changes the code such that only messaging_dispatch_rec adds records
to msg_ctx->waiters, new waiters are put into a staging area first
(msg_ctx->new_waiters). Also messaging_read_cleanup does not move anything
around in msg_ctx->waiters, it only nulls out itself. messaging_dispatch_rec is
changed to cope with this.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This corresponds to low_id for convenience and allows
for computations without going back to the global config.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This uses a copy, will be replaced by a direct iovec call through to
sendmsg on the unix domain socket
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Messaging based on unix domain datagram sockets
This makes every process participating in messaging bind on a unix domain
datagram socket, similar to the source4 based messaging. The details are a bit
different though:
Retry after EWOULDBLOCK is done with a blocking thread, not by polling. This
was the only way I could in experiments avoid a thundering herd or high load
under Linux in extreme overload situations like many thousands of processes
sending to one blocked process. If there are better ideas to do this in a
simple way, I'm more than happy to remove the pthreadpool dependency again.
There is only one socket per process, not per task. I don't think that per-task
sockets are really necessary, we can do filtering in user space. The message
contains the destination server_id, which contains the destination task_id. I
think we can rebase the source4 based imessaging on top of this, allowing
multiple imessaging contexts on top of one messaging_context. I had planned to
do this conversion before this goes in, but Jeremy convinced me that this has
value in itself :-)
Per socket we also create a fcntl-based lockfile to allow race-free cleanup of
orphaned sockets. This lockfile contains the unique_id, which in the future
will make the server_id.tdb obsolete.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The WAF build does not have the code to detect getprpwnam on which
this is based, and so this is dead code.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
When a smbd process dies, pending messages.tdb records for this process
might not get cleaned up. Implement a cleanup for dead records that is
triggered after a smbd dies uncleanly; the records for that PID are
deleted.
Based on a patchset from Christof Schmitt <cs@samba.org>.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Christof Schmitt <cs@samba.org>
These will be used separately in the full initialization function.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
All ctdb specific code is isolated in samba-cluster-support.so now.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Mar 24 19:08:44 CET 2014 on sn-devel-104
gencache_parse calling tdb shows up in profiles when we do a lot of open/close
traffic with large ACLs. For every file we convert unix ids to sids, and in the
domain member case this goes through gencache.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Mar 11 19:56:47 CET 2014 on sn-devel-104
Add stream name defines that are usable with Samba's way of storing
stream names internally.
Signed-off-by: Ralph Boehme <rb@sernet.de>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Simo Sorce <idra@samba.org>
Bug: https://bugzilla.samba.org/show_bug.cgi?id=10422
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Mar 5 22:53:34 CET 2014 on sn-devel-104
If it returns true the passed ip address matched and we
let a nested ctdb operation fail with NT_STATUS_ADDRESS_CLOSED.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
With the use of the shared globals structure, lp_dnsdomain is no longer used in the code and removing it would remove a notable special case
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Change-Id: I59526c40c58e132a134d67fa7944dfeacd05f4c6
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Nadezhda Ivanova <nivanova@samba.org>
This is not used in other parts of source3, so this patch improves
modularity and isolation of features.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This parameter is renamed because it does not normally return the current smb.conf file, but
instead returns the next one, as found in a config file = directive, to be loaded.
This avoids a conflict with the lpcfg_configfile from lib/param, which does refer to the
current smb.conf path.
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Michael Adam <obnox@samba.org>
Pair-programmed-with: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
The build system gives these two parameters different defaults
(compared with lock dir) in both the --enable-fhs and default mode, so
the logic to use lock dir no longer applies unless the build has been
very specially constructed.
Therefore, remove the special case handling and make these normal
parameters again.
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
They have been changed to function like normal parameters,
removing a special case in the loadparm system.
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Michael Adam <obnox@samba.org>
Tests show that Samba's smbd uses 38 open files at startup.
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Kamen Mazdrashki <kamenim@samba.org>
This is made to replace the msg_channel abstraction.
msg_channel was created to not miss any messages. For this, some
complex queueing was installed. This complexity has caused quite a
few problems in the past (see bug 10284 for example).
messaging_read_send/recv is able to achieve the same goal with a
lot less complexity. The messaging_read_send atomically installs
the reader into the messaging_context, we will not miss any messages
while this installed. messaging_send_recv will deinstall that
listener, but in the callback function you can directly call
messaging_read_send again without going through the tevent_loop_once.
As long as this is always made sure, no messages will be lost.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We will use this in mapping 64-bit directory offset
cookies to a 32-bit counter.
https://bugzilla.samba.org/show_bug.cgi?id=2662
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This protects the password change using a domain specific g_lock,
so multiple parts 'net rpc', 'rpcclient', 'winbindd', 'wbinfo --change-secret'
even on multiple cluster nodes doesn't race anymore.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Dec 12 17:58:24 CET 2013 on sn-devel-104
The VFS interfaces are sychronous, as the operations only modify
meta-data.
These hooks are dependent on support for transparent compression by the
underlying filesystem - vfs_default returns INVALID_DEVICE_REQUEST.
Support for other filesystems providing transparent comression, such as
Btrfs and ZFS, can be added in future.
The get_compression function takes fsp and smb_fname arguments. The
smb_fname argument is needed due to the current dosmode() code-path.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
printing.c was the last user of this syslog wrapper.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Wed Nov 20 10:19:32 CET 2013 on sn-devel-104
print_access_check() currently returns a bool based on whether access is
granted or denied. Errno is set on failure, but none of the callers use
it.
This change converts print_access_check() to return a WERROR.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Print job notifications currently carry the system print job identifier
from the queue structure. Instead, the spoolss job identifier should be
resolved and returned.
Print clients can use notification job-ids in subsequent spoolss SetJob
requests. Returning an incorrect identifier can result in the failure of
such requests, e.g. spoolss_SetJob(SPOOLSS_JOB_CONTROL_DELETE).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=10271
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
The pathinfo2 call might fail against NetApp because it is sending broken
packages.
Signed-off-by: Gregor Beck <gbeck@sernet.de>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This will avoid panic calls when smbd and winbind is started in cluster
mode before ctdb is functional. It still logs something sane at debug
level 0, but it does not panic and core anymore.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
The function already used 'uint8_t' instead of 'uint8'.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This also ensures we remove prototypes from parameters we remove or
rename, and easily see how many special cases we have left.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This autogenerates the parameters so that we can keep everything in sync easier,
particularly when adding new parameters. This will also make it easier to move
to a fully autogenerated system in the future, as it reduces special cases.
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
FAKE_LEVEL_II_OPLOCK was an indicator to break level2 oplock holders
on write. This information is now being held in brlock.tdb, which makes
the FAKE_LEVEL_II_OPLOCK type unnecessary.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This uses the documeted "winbindd socket directory" parameter instead.
This came about due to the merge of the two smb.conf tables in s3 and
s4 for the Samba 4.0 release. The s4 code used a real parameter,
which caused this to be documented, whereas no automatic procedure
existed to notice the parametric option and the need to document that.
The fact that this was not used consistently in both codebases is one
of the many areas of technical debt we still need to pay off here.
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This uses the new idmap_autorid_iterate_domain_ranges() function.
Based on earlier patch by Atul Kulkarni <atul.kulkarni@in.ibm.com>.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Functions to perform an action on all domain range mappings for
a given domain, specified by the domain sid.
Inspired by a previous patch by Atul Kulkarni <atul.kulkarni@in.ibm.com>.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Delete a range mapping as specified by domain SID and range index.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Store a configuration as provided by a config string
after parsing and validating the string.
Based on similar patch by Atul Kulkarni <atul.kulkarni@in.ibm.com>.
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
This allows to directly set a range for a domsid#index pair.
It fails if a stored range is found which is different from
the requested one.
Pair-Programmed-With: Atul Kulkarni <atul.kulkarni@in.ibm.com>
Signed-off-by: Michael Adam <obnox@samba.org>
Signed-off-by: Atul Kulkarni <atul.kulkarni@in.ibm.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
This is just used to change the behaviour of the function.
Making it more suitable to be used at other places.
Signed-off-by: Atul Kulkarni <atul.kulkarni@in.ibm.com>
Reviewed-by: Michael Adam <obnox@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
global config is not part of range config.
By removing this, autorid_range_config becomes more suitable
for using it elsewhere.
Pair-Programmed-With: Michael Adam <obnox@samba.org>
Signed-off-by: Atul Kulkarni <atul.kulkarni@in.ibm.com>
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
This will be used for other purposes as well.
Pair-Programmed-with: Atul Kulkarni <atul.kulkarni@in.ibm.com>
Signed-off-by: Michael Adam <obnox@samba.org>
Signed-off-by: Atul Kulkarni <atul.kulkarni@in.ibm.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
This is in preparation of adding "net idmap autorid" functionality.
Pair-Programmed-With: Michael Adam <obnox@samba.org>
Signed-off-by: Atul Kulkarni <atul.kulkarni@in.ibm.com>
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
When a Windows client receives a large directory listing while
querying snapshots, it sends a find request asking for the
timestamp as a directory. A Windows server returns NO_SUCH_FILE,
so make sure Samba returns the same. Otherwise the client will
get confused and display timestamps in the 'previous versions' dialog.
Signed-off-by: Christof Schmitt <christof.schmitt@us.ibm.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Sep 10 22:38:51 CEST 2013 on sn-devel-104
changing smb server version from 4.9 to 6.1 to
mimic win2k8r2.
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Sep 6 19:41:51 CEST 2013 on sn-devel-104
This flag existed to break an exclusive or batch oplock in just one
instead of two steps down to "no oplock" when we did an allocation or file
size change. Running raw.oplock against W2k12 differs in this respect
from W2k3: W2k12 takes two steps (via level2) to break to none. This
removes the special flag that we only had for compatibility with systems
older than W2k12...
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Sep 6 00:47:07 CEST 2013 on sn-devel-104
Windows overloads the EA Length field in the DIRECTORY INFO leves of FIND FIRST/FIND NEXT.
This field indicates either the REPARSE_TAG if the file/folder has a reparse proint or
the EA Length if it has EAs, and is the fundamental reason you cannot have both on a
file or folder.
Signed-off-by: Richard Sharpe <rsharpe@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Aug 19 22:21:34 CEST 2013 on sn-devel-104
These create a synchronous cli_smb2_XXX() style interface
designed to plug directly into the libsmb/cliXXXX.c code.
https://bugzilla.samba.org/show_bug.cgi?id=9974
Signed-off-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Set to PROTOCOL_NT1, PROTOCOL_CORE by default.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=9829
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
