IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Adding test env ad_dc_default_smb1_done an alias for
test environment ad_dc_default_smb1
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
ad_dc_smb1 is a copy of the ad_dc test environment but
with the difference that it still supports SMB1, this will allow
use to still run SMB1 tests for that env.
Signed-off-by: Noel Power <npower@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Test environments rpc_proxy & s4member depend on ad_dc_ntvfs
so these environments additionally need to also be able to
still support SMB1.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Change the values of 'min protocol' set for the various test
environments to be SMB2_02.
Servers will only offer protocols starting with the min specified in the
conf files. We don't change the client value here yet (until SMB1 is
truely gone) as we still want to be able to run SMB1 tests.
Signed-off-by: Noel Power <npower@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
The default for most test envs will be changed in a future
commit(s) to be >= SMB2 then we need to still allow ad_dc_ntvfs to
support SMB1. This will make the number of tests to port easier to
deal with. In addition to test env ad_dc_ntvfs still supporting SMB1
we need to do the same with test other environments that depend on
ad_dc_ntvfs (this will be handled in followup commits).
In addition to the above this change will ensure we don't trigger
failures for ntvfs tests when we switch to default >= SMB2 which will
make the associated skip file (added in a future commit) smaller.
Signed-off-by: Noel Power <npower@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
These restore copies of others and better use their own resolv.conf
and use '--use-samba-tool --no-credentials' for samba_dnsupdate in order
to avoid talking to the real environments.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
By default point RESOLV_CONF to a non-existing file and
use the per environment RESOLV_CONF explicitly where needed.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This is needed for all environments not just "samba".
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The character ':' has no meaning in function signatures. Perhaps ';' was
intended, which would have marked the later arguments as optional --
which is the default with no signature. All callers always provide all
the arguments anyway.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
If the SOCKET_WRAPPER_PCAP_DIR is not defined, let's assume it wasn't
wanted rather than choosing /.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The '%ret = {}' construction was bad because '{}' is a hash-ref, which
counts as a single scalar value, but a true hash like '%ret' must be
initialised with an even number of scalar values (usually in pairs, like
'($a => $b, $c => $d)').
I think this meant %ret was initialised as something harmless like
'(<HASH(0x55ce39781278)> => undef)'.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
None of these ones are doing any harm, we just want to silence these
warnings.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
After this we will see more noise with each test run, and these
warnings will be addressed in following commits.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Dec 20 07:34:42 UTC 2019 on sn-devel-184
This removes some quite complex logic that has not been used since the LDAP
backend project was shelved prior to 2011.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Nadezhda Ivanova <nivanova@symas.com>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Aug 22 21:24:00 UTC 2019 on sn-devel-184
This is the current default and what 'make test' assumes currently.
The next commit will change the default to "illegal".
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This is the current default and what 'make test' assumes currently.
The next commit will change the default to disable SMB1.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This is the current default and what 'make test' assumes currently.
The next commit will change the default to disable SMB1.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Remove the sub domain option from join, as it currently does not work.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Jul 1 23:21:07 UTC 2019 on sn-devel-184
We're going to change the default base schema so this patch changes all
tests and testenvs requiring the current default (2008_R2) to specify it
in all provision commands using --base-schema.
Signed-off-by: Aaron Haslett <aaronhaslett@catalyst.net.nz>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
When creating the customdc, testparm would default to using
/usr/local/samba sub-directories for creating sockets and lock files.
Instead, pass in the tmpdir we just created as an option to the command.
Normally this didn't cause a noticeable problem, however, if we run the
command with UID-wrapper but without socket-wrapper (i.e.
USE_NAMESPACES=1), then it fails completely.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri May 31 06:34:36 UTC 2019 on sn-devel-184
