IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
samba-tool ntacl get testfile --xattr-backend=tdb --use-ntvfs
Fixes: Unknown parameter encountered: "state dir"
Signed-off-by: Björn Baumbach <bb@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
get_share (called from 'net conf showshare') does a lookup of the share
name case-insensitively. As the registry stores the share name in the
correct case and 'net conf list' prints the correct case, also lookup
the correct case for get_share.
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Add a test to verify that 'net [rpc] conf showshare' returns the correct
upper/lower case.
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Opening a file with a stale (smbd died) LEVEL_II oplock makes
vfs_set_filelen-> ... ->contend_level2_oplocks_begin_default
trigger the immediate leading to do_break_to_none. This goes through
because fsp->oplock_type is not initialized yet, thus 0. Also,
file_has_read_oplocks is still valid, because the smbd that has died
could not clean up the brlock.tdb entry.
Later in the code the exclusive oplock is granted, which is then found
by do_break_to_none, making it panic.
This patch just runs the direct FTRUNCATE instead of vfs_set_filelen.
This means the contend_level2_oplock code is skipped.
The relevant break (LEVEL_II to NONE) is now done in delay_for_oplock()
with the nice effect of removing a comment that was very confusing to
me.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13957
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Wed May 22 20:09:29 UTC 2019 on sn-devel-184
Also Skip MC tests for s4 ntvfs fileserver, it's not supported at all.
Use knownfail for s3 fileserver for the time being (until socketwrapper
supports fd-passing).
Signed-off-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
When winbindd is asked to map a name like realm.com\name to a SID ,that
is sucessfully resolved through the lsa lookup name call. The same call
also returns the short domain name (netbios name of the domain). Use
that short domain name for the sid_to_name cache entry, so that
subsequent sid_to_name queries return the expected netbiosname\name
result and not realm.com\name.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13831
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
The username should always be returned in the DOMAISHORTNAME/USERNAME
format.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13831
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
The max_buffer value is only evaluated on the first notify
request on a directory handle.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13864
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Mar 29 00:35:39 UTC 2019 on sn-devel-144
This seems to match Windows Server 2016.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13863
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The same tests as for the other modes xdr and ndr are marked as
knownfail.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The auth-logging tests are an odd combination of server and client
behaviour. On the one hand we want a IRPC connection to see the auth
events being logged on the server. On the other hand, we want the auth
events to appear to be happening on a client. Currently we hardcode in
the use of a SOCKET_WRAPPER interface to make this happen.
We can avoid this explicit socket wrapper usage by using the server
smb.conf instead in the one place we actually want to act like the
server (creating the IRPC connection). Then we can switch from using
the 'ad_dc*:local' testenvs to use 'ad_dc*', in order to act like a
client by default. The SERVERCONFFILE environment variable has already
been added for the few cases where a test needs explicit access to the
server's smb.conf.
However, for samba.tests.auth_log, the samlogon test cases are still
reliant on being run on the :local testenv, and so we can't switch them
over just yet. This is because the samlogon is using the DC's machine
creds underneath, which will fail on the non-local testenv. We could
create separate machine creds for the client and use those, but this is
a non-trivial rework of the test code.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Previous regression test ensures we still return the correct
error code for POSIX pathname operations.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13803
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Mon Feb 25 09:33:27 CET 2019 on sn-devel-144
Ensure that if POSIX_foo exists as a file
we return the correct error code NT_STATUS_OBJECT_PATH_NOT_FOUND
if we try and traverse it as a directory.
Also ensure creation/deletion of POSIX_foo/foo fails
for directories and files with NT_STATUS_OBJECT_PATH_NOT_FOUND
if the directory POSIX_foo/ doesn't exist.
knownfail is back :-).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13803
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
For posix_pathnames don't blunder into the name_has_wildcard OR
get_real_filename() codepaths as they may be doing case insensitive lookups.
So when creating a new POSIX directory 'Foo' they might
match on name 'foo'.
Remove POSIX-MKDIR from knownfail.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13803
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Sun Feb 24 14:04:14 CET 2019 on sn-devel-144
Test does:
mkdir POSIX_foo
mkdir POSIX_Foo
mkdir POSIX_foo/Foo
mkdir POSIX_foo/foo
mkdir POSIX_Foo/Foo
mkdir POSIX_Foo/foo
Which should pass a SMB1 POSIX extensions server
as posix mkdir should always be case sensitive
no matter what the share is set to.
Mark as knownfail for now.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13803
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
smbd could crash if "force group" is added to a
share definition whilst an existing connection
to that share exists. In that case, don't change
the existing credentials for force group, only
do so for new connections.
Remove knownfail from regression test.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13690
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Jan 25 16:31:27 CET 2019 on sn-devel-144
While 'es' format works great for unicode (in python2) and
str (in python3) The behaviour with str (in python2) is unexpected.
In python2 the str type is (re-encoded) with the specified encoding.
In python2 the 'et' type would be a better match, that ensures 'str'
type is treated like it was with 's' (no reencoding) and unicode is
encoded with the specified encoding. However in python3 'et' allows
byte (or bytearray) params to be accepted (with no reencoding), we
don't want this. This patch adds a new PYARG_STR_UNI format code which
is a hybrid, in python2 it evaluates to 'et' and in python3 'es' and
so gives the desired behaviour for each python version.
Additionally remove the associated known fail.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13616
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Douglas Bagnall <dbagnall@samba.org>
Autobuild-Date(master): Sun Jan 13 03:53:00 CET 2019 on sn-devel-144
This test should demonstrate an error with the 'es' format in python
where a 'str' byte-string is passed (containing utf8 encoded bytes)
with some characters that cannot be decoded as ascii. The same
code if run in python3 should generate an error (needs string not
bytes)
Also Add knownfail for ldb.Dn passed utf8 encoded byte string
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Post build & test running under python3 we now run with
'--extra-python=/usr/bin/python2', these tests will get
python2 appended to the test name so we need also to create
new knownfails for these. We will keep the python3 versions
in case we create (and we probably should) some CI job(s)
with
PYTHON=python configure.developer --extra-python=/usr/bin/python3
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
MS-FSA states that a CREATE with FILE_DELETE_ON_CLOSE on an existing
file with READ_ONLY attribute has to return STATUS_CANNOT_DELETE. This
was missing in smbd as the check used the DOS attributes from the CREATE
instead of the DOS attributes on the existing file.
We need to handle the new file and existing file cases separately.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13673
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The env name will be appended. There is no need to have it twice. Can't
we remove the tests againa ad_dc_ntvfs completely?
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Additionally remove the associated known fail.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13616
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
object dn format should be a utf8 encoded string
Note: Currently this fails in python2 as the c python binding for
the dn string param uses PyArg_ParseTupleAndKeywords() with 's'
format, this will accept str *or* unicode in the default encoding.
The default encoding in python2 is... ascii.
Also adding here a knownfail to squash the error produced by the test.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Sep 5 21:56:11 CEST 2018 on sn-devel-144
This fixes a regression that came in via 00db3aba6c.
Found by Vivek Das <vdas@redhat.com> (Red Hat QE).
In order to demonstrate simply run:
smbclient //server/share -U user%password -mNT1 -c quit \
--option="client ntlmv2 auth"=no \
--option="client use spnego"=no
against a server that uses "ntlm auth = ntlmv2-only" (our default
setting).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13360
CVE-2018-1139: Weak authentication protocol allowed.
Guenther
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
We were always asking for SPLICE_BLOCK_SIZE even when the
remaining bytes we wanted were smaller than that. This works
when using cli_splice() on a complete file, as the cli_read()
terminated the read at the right place. We always have the
space to read SPLICE_BLOCK_SIZE bytes so this isn't an overflow.
Found by Bailey Berro <baileyberro@google.com>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13527
Signed-off-by: Bailey Berro <baileyberro@google.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Fri Jul 13 14:57:14 CEST 2018 on sn-devel-144
When deleting a file, all leases granting handle caching lease to the
file should be recalled.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13458
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Jun 1 02:57:46 CEST 2018 on sn-devel-144
The tests are currently only run against streams_depot, where stream IO
is handle based, compared to streams_xattr which is path
based. vfs_streams_xattr is also used much more in real world setups, so
we should run our tests against it.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13451
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Sub directories in a SMB share can have different free space information
(e.g. when a different file system is mounted there). Caching the dfree
information per SMB share will return invalid data. Address this by
switching to memcache and store the cached data based on the query path.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13446
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We now pass samba3hide(nt4_dc), so remove it from knownfail.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri May 25 21:29:32 CEST 2018 on sn-devel-144
Tests against a directory handle on the root of a share,
and a directory handle on a sub-directory in a share.
Check SEC_DIR_ADD_FILE and SEC_DIR_ADD_SUBDIR separately,
either allows flush to succeed.
Passes against Windows.
Regression test for:
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13428
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri May 18 02:38:50 CEST 2018 on sn-devel-144
A LOOKUPNAME request with a domain and a name containing a winbind
separator character would return the result for the joined domain,
instead of the specified domain.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13312
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Apr 6 21:03:31 CEST 2018 on sn-devel-144
This demonstrates that wbinfo -n / --name-to-sid returns information
instead of failing the request. More specifically the query for
INVALIDDOMAIN//user returns the user SID for the joined domain, instead
of failing the request.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13312
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This simplifies selecting a specific test to run.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlet <abartlet@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Sat Mar 3 05:19:38 CET 2018 on sn-devel-144
server_exit does an internal tree disconnect which requires a chdir to
the share directory. In case the file system encountered a problem and
the chdir call returns an error, this triggers a SERVER_EXIT_ABNORMAL
which in turn results in a panic and a coredump. As the log already
indicates the problem (chdir returned an error), avoid the
SERVER_EXIT_ABNORMAL in this case and not trigger a coredump.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13189
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Dec 16 01:56:06 CET 2017 on sn-devel-144
This is marked as knownfail for quite some time.
I don't think such a test is a reason to the 'auth methods' option.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
