1
0
mirror of https://github.com/samba-team/samba.git synced 2024-12-24 21:34:56 +03:00
samba-mirror/testprogs/blackbox/dbcheck-oldrelease.sh
Andrew Bartlett 0b525fe862 selftest: Do not scan the full DB to confirm a specific DN in dbcheck
This avoids a full DB scan and therefore reduces the test time taken
when we just modified the cn=administrator record.

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
2016-06-07 10:28:10 +02:00

453 lines
17 KiB
Bash
Executable File

#!/bin/sh
if [ $# -lt 1 ]; then
cat <<EOF
Usage: dbcheck.sh PREFIX RELEASE
EOF
exit 1;
fi
PREFIX_ABS="$1"
RELEASE="$2"
shift 2
. `dirname $0`/subunit.sh
release_dir=`dirname $0`/../../source4/selftest/provisions/$RELEASE
ldbmodify="ldbmodify"
if [ -x "$BINDIR/ldbmodify" ]; then
ldbmodify="$BINDIR/ldbmodify"
fi
ldbdel="ldbdel"
if [ -x "$BINDIR/ldbdel" ]; then
ldbdel="$BINDIR/ldbdel"
fi
ldbsearch="ldbsearch"
if [ -x "$BINDIR/ldbsearch" ]; then
ldbsearch="$BINDIR/ldbsearch"
fi
undump() {
if test -x $BINDIR/tdbrestore;
then
`dirname $0`/../../source4/selftest/provisions/undump.sh $release_dir $PREFIX_ABS/$RELEASE $BINDIR/tdbrestore
else
`dirname $0`/../../source4/selftest/provisions/undump.sh $release_dir $PREFIX_ABS/$RELEASE
fi
}
add_userparameters0() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
$ldbmodify -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb <<EOF
dn: cn=localdc,cn=domain controllers,dc=release-4-1-0rc3,dc=samba,dc=corp
changetype: modify
replace: userParameters
userParameters:: IAAgACAAIAAgACAAIAAgACAAIAAgACAAIAAgACAAIAAgACAAIAAgACAAIAAgACAAIAAgAC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-
EOF
fi
}
add_userparameters1() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
$ldbmodify -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb <<EOF
dn: cn=administrator,cn=users,dc=release-4-1-0rc3,dc=samba,dc=corp
changetype: modify
replace: userParameters
userParameters: IAAgACAAIAAgACAAIAAgACAAIAAgACAAIAAgACAAIAAgACAAIAAgACAAIAAgACAAIAAgAC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-
EOF
fi
}
add_userparameters2() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
$ldbmodify -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb <<EOF
dn: cn=krbtgt,cn=users,dc=release-4-1-0rc3,dc=samba,dc=corp
changetype: modify
replace: userParameters
userParameters:: Q3R4Q2ZnUHJlc2VudCAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgI
CAgUAsaCAFDdHhDZmdQcmVzZW5045S15pSx5oiw44GiIAIBQ3R4V0ZQcm9maWxlUGF0aOOAsBgCAU
N0eFdGSG9tZURpcuOAsCICAUN0eFdGSG9tZURpckRyaXZl44CwEggBQ3R4U2hhZG9344Sw44Cw44C
w44CwLggBQ3R4TWF4RGlzY29ubmVjdGlvblRpbWXjgaXjjLnjkLDjgLAoCAFDdHhNYXhDb25uZWN0
aW9uVGltZeOAtOOct+aIseOAsBwIAUN0eE1heElkbGVUaW1l44Gj45yy46Sw44CwIAIBQ3R4V29ya
0RpcmVjdG9yeeOAsBgIAUN0eENmZ0ZsYWdzMeOAsOOBpuOYsuOAuCICAUN0eEluaXRpYWxQcm9ncm
Ft44Cw
-
EOF
fi
}
add_userparameters3() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
$ldbmodify -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb <<EOF
dn: cn=guest,cn=users,dc=release-4-1-0rc3,dc=samba,dc=corp
changetype: modify
replace: userParameters
userParameters:: QwAAAHQAAAB4AAAAQwAAAGYAAABnAAAAUAAAAHIAAABlAAAAcwAAAGUAAABuA
AAAdAAAACAAAAAgAAAAIAAAACAAAAAgAAAAIAAAACAAAAAgAAAAIAAAACAAAAAgAAAAIAAAACAAAA
AgAAAAIAAAACAAAAAgAAAAIAAAACAAAAAgAAAAIAAAACAAAAAgAAAAIAAAACAAAAAgAAAAIAAAACA
AAAAgAAAAIAAAACAAAAAgAAAAIAAAACAAAAAgAAAAUAAAAAsAAAAaAAAACAAAAAEAAABDAAAAdAAA
AHgAAABDAAAAZgAAAGcAAABQAAAAcgAAAGUAAABzAAAAZQAAAG4AAAB0AAAANQA1ADEAZQAwAGIAY
gAwACAAAAACAAAAAQAAAEMAAAB0AAAAeAAAAFcAAABGAAAAUAAAAHIAAABvAAAAZgAAAGkAAABsAA
AAZQAAAFAAAABhAAAAdAAAAGgAAAAwADAAGAAAAAIAAAABAAAAQwAAAHQAAAB4AAAAVwAAAEYAAAB
IAAAAbwAAAG0AAABlAAAARAAAAGkAAAByAAAAMAAwACIAAAACAAAAAQAAAEMAAAB0AAAAeAAAAFcA
AABGAAAASAAAAG8AAABtAAAAZQAAAEQAAABpAAAAcgAAAEQAAAByAAAAaQAAAHYAAABlAAAAMAAwA
BIAAAAIAAAAAQAAAEMAAAB0AAAAeAAAAFMAAABoAAAAYQAAAGQAAABvAAAAdwAAADAAMQAwADAAMA
AwADAAMAAuAAAACAAAAAEAAABDAAAAdAAAAHgAAABNAAAAYQAAAHgAAABEAAAAaQAAAHMAAABjAAA
AbwAAAG4AAABuAAAAZQAAAGMAAAB0AAAAaQAAAG8AAABuAAAAVAAAAGkAAABtAAAAZQAAAGUAMAA5
ADMAMAA0ADAAMAAoAAAACAAAAAEAAABDAAAAdAAAAHgAAABNAAAAYQAAAHgAAABDAAAAbwAAAG4AA
ABuAAAAZQAAAGMAAAB0AAAAaQAAAG8AAABuAAAAVAAAAGkAAABtAAAAZQAAADQAMAA3ADcAMQBiAD
AAMAAcAAAACAAAAAEAAABDAAAAdAAAAHgAAABNAAAAYQAAAHgAAABJAAAAZAAAAGwAAABlAAAAVAA
AAGkAAABtAAAAZQAAAGMAMAAyADcAMAA5ADAAMAAgAAAAAgAAAAEAAABDAAAAdAAAAHgAAABXAAAA
bwAAAHIAAABrAAAARAAAAGkAAAByAAAAZQAAAGMAAAB0AAAAbwAAAHIAAAB5AAAAMAAwABgAAAAIA
AAAAQAAAEMAAAB0AAAAeAAAAEMAAABmAAAAZwAAAEYAAABsAAAAYQAAAGcAAABzAAAAMQAAADAAMA
BmADAAMgA2ADgAMAAiAAAAAgAAAAEAAABDAAAAdAAAAHgAAABJAAAAbgAAAGkAAAB0AAAAaQAAAGE
AAABsAAAAUAAAAHIAAABvAAAAZwAAAHIAAABhAAAAbQAAADAAMAA=
-
EOF
fi
}
reindex() {
$PYTHON $BINDIR/samba-tool dbcheck --reindex -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb $@
}
do_current_version_mod() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
# Confirm (in combination with the ldbsearch below) that
# changing the attribute with current Samba fixes it, and that
# a fixed attriute isn't unfixed by dbcheck.
tmpldif=$release_dir/sudoers2-mod.ldif
$ldbmodify -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb $tmpldif
fi
return 0
}
check_expected_before_values() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
tmpldif=$PREFIX_ABS/$RELEASE/expected-replpropertymetadata-before-dbcheck.ldif.tmp
TZ=UTC $ldbsearch -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb cn=ops_run_anything -s one -b OU=SUDOers,DC=release-4-1-0rc3,DC=samba,DC=corp \* replpropertymetadata --sorted --show-binary > $tmpldif
diff $tmpldif $release_dir/expected-replpropertymetadata-before-dbcheck.ldif
if [ "$?" != "0" ]; then
return 1
fi
TZ=UTC $ldbsearch -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb cn=ops_run_anything2 -s one -b OU=SUDOers,DC=release-4-1-0rc3,DC=samba,DC=corp \* replpropertymetadata --sorted --show-binary | grep -v originating_change_time| grep -v whenChanged > $tmpldif
# Here we remove originating_change_time and whenChanged as
# these are time-dependent, caused by the ldbmodify above.
diff $tmpldif $release_dir/expected-replpropertymetadata-before-dbcheck2.ldif
if [ "$?" != "0" ]; then
return 1
fi
TZ=UTC $ldbsearch -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb cn=ops_run_anything3 -s one -b OU=SUDOers,DC=release-4-1-0rc3,DC=samba,DC=corp \* replpropertymetadata --sorted --show-binary > $tmpldif
diff $tmpldif $release_dir/expected-replpropertymetadata-before-dbcheck3.ldif
if [ "$?" != "0" ]; then
return 1
fi
fi
return 0
}
# This should 'fail', because it returns the number of modified records
dbcheck() {
$PYTHON $BINDIR/samba-tool dbcheck --cross-ncs --fix --yes -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb $@
}
check_expected_after_values() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
tmpldif=$PREFIX_ABS/$RELEASE/expected-replpropertymetadata-before-dbcheck.ldif.tmp
TZ=UTC $ldbsearch -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb cn=ops_run_anything -s one -b OU=SUDOers,DC=release-4-1-0rc3,DC=samba,DC=corp \* replpropertymetadata --sorted --show-binary > $tmpldif
diff $tmpldif $release_dir/expected-replpropertymetadata-after-dbcheck.ldif
if [ "$?" != "0" ]; then
return 1
fi
TZ=UTC $ldbsearch -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb cn=ops_run_anything2 -s one -b OU=SUDOers,DC=release-4-1-0rc3,DC=samba,DC=corp \* replpropertymetadata --sorted --show-binary | grep -v originating_change_time| grep -v whenChanged > $tmpldif
diff $tmpldif $release_dir/expected-replpropertymetadata-after-dbcheck2.ldif
if [ "$?" != "0" ]; then
return 1
fi
TZ=UTC $ldbsearch -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb cn=ops_run_anything3 -s one -b OU=SUDOers,DC=release-4-1-0rc3,DC=samba,DC=corp \* replpropertymetadata --sorted --show-binary > $tmpldif
diff $tmpldif $release_dir/expected-replpropertymetadata-after-dbcheck3.ldif
if [ "$?" != "0" ]; then
return 1
fi
fi
return 0
}
check_forced_duplicate_values() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
ldif=$release_dir/forced-duplicate-value-for-dbcheck.ldif
TZ=UTC $ldbmodify -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb.d/DC%3DRELEASE-4-1-0RC3,DC%3DSAMBA,DC%3DCORP.ldb $ldif
if [ "$?" != "0" ]; then
return 1
fi
else
return 0
fi
}
# This should 'fail', because it returns the number of modified records
dbcheck_after_dup() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
$PYTHON $BINDIR/samba-tool dbcheck --fix --yes -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb cn=administrator,cn=users,DC=release-4-1-0rc3,DC=samba,DC=corp $@
else
return 1
fi
}
check_expected_after_dup_values() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
tmpldif=$PREFIX_ABS/$RELEASE/expected-otherphone-after-dbcheck.ldif.tmp
TZ=UTC $ldbsearch -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb cn=administrator -s base -b cn=administrator,cn=users,DC=release-4-1-0rc3,DC=samba,DC=corp otherHomePhone --sorted --show-binary | grep -v \# | sort > $tmpldif
diff $tmpldif $release_dir/expected-otherphone-after-dbcheck.ldif
if [ "$?" != "0" ]; then
return 1
fi
fi
return 0
}
# But having fixed it all up, this should pass
dbcheck_clean() {
$PYTHON $BINDIR/samba-tool dbcheck --cross-ncs -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb $@
}
# This should 'fail', because it returns the number of modified records.
# We don't need to run this against 4.1 releases
dbcheck_acl_reset() {
if [ x$RELEASE = x"release-4-0-0" -o x$RELEASE = x"alpha13" ]; then
$PYTHON $BINDIR/samba-tool dbcheck --reset-well-known-acls --cross-ncs --fix --yes -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb $@
else
return 1
fi
}
# But having fixed it all up, this should pass.
# We don't need to run this against 4.1.0rc3
dbcheck_acl_reset_clean() {
if [ x$RELEASE != x"release-4-1-0rc3" ]; then
$PYTHON $BINDIR/samba-tool dbcheck --reset-well-known-acls --cross-ncs -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb $@
fi
}
# This should 'fail', because it returns the number of modified records
dbcheck2() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
$PYTHON $BINDIR/samba-tool dbcheck --cross-ncs --fix --yes -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb $@
else
exit 1
fi
}
# But having fixed it all up, this should pass
dbcheck_clean2() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
$PYTHON $BINDIR/samba-tool dbcheck --cross-ncs -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb $@
fi
}
rm_deleted_objects() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
TZ=UTC $ldbdel -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb.d/DC%3DRELEASE-4-1-0RC3,DC%3DSAMBA,DC%3DCORP.ldb 'CN=Deleted Objects,DC=RELEASE-4-1-0RC3,DC=SAMBA,DC=CORP'
if [ "$?" != "0" ]; then
return 1
fi
else
return 0
fi
}
# This should 'fail', because it returns the number of modified records
dbcheck3() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
$PYTHON $BINDIR/samba-tool dbcheck --cross-ncs --fix --yes -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb $@
else
exit 1
fi
}
# But having fixed it all up, this should pass
dbcheck_clean3() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
$PYTHON $BINDIR/samba-tool dbcheck --cross-ncs -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb $@
fi
}
check_expected_after_deleted_objects() {
if [ x$RELEASE = x"release-4-1-0rc3" ]; then
tmpldif=$PREFIX_ABS/$RELEASE/expected-deleted_objects-after-dbcheck.ldif.tmp
TZ=UTC $ldbsearch -H tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb cn=deleted\ objects -s base -b cn=deleted\ objects,DC=release-4-1-0rc3,DC=samba,DC=corp objectClass description isDeleted isCriticalSystemObject objectGUID showInAdvancedViewOnly systemFlags --sorted --show-binary --show-deleted | grep -v \# | sort > $tmpldif
diff $tmpldif $release_dir/expected-deleted_objects-after-dbcheck.ldif
if [ "$?" != "0" ]; then
return 1
fi
fi
return 0
}
referenceprovision() {
if [ x$RELEASE == x"release-4-0-0" ]; then
$PYTHON $BINDIR/samba-tool domain provision --server-role="dc" --domain=SAMBA --host-name=ares --realm=${RELEASE}.samba.corp --targetdir=$PREFIX_ABS/${RELEASE}_reference --use-ntvfs --host-ip=127.0.0.1 --host-ip6=::1 --function-level=2003
fi
}
ldapcmp() {
if [ x$RELEASE == x"release-4-0-0" ]; then
$PYTHON $BINDIR/samba-tool ldapcmp tdb://$PREFIX_ABS/${RELEASE}_reference/private/sam.ldb tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb --two --skip-missing-dn --filter=dnsRecord
fi
}
ldapcmp_sd() {
if [ x$RELEASE == x"release-4-0-0" ]; then
$PYTHON $BINDIR/samba-tool ldapcmp tdb://$PREFIX_ABS/${RELEASE}_reference/private/sam.ldb tdb://$PREFIX_ABS/${RELEASE}/private/sam.ldb --two --sd --skip-missing-dn
fi
}
if [ -d $release_dir ]; then
testit $RELEASE undump
testit "reindex" reindex
testit "current_version_mod" do_current_version_mod
testit "check_expected_before_values" check_expected_before_values
testit_expect_failure "dbcheck" dbcheck
testit "check_expected_after_values" check_expected_after_values
testit "check_forced_duplicate_values" check_forced_duplicate_values
testit_expect_failure "dbcheck_after_dup" dbcheck_after_dup
testit "check_expected_after_dup_values" check_expected_after_dup_values
testit "dbcheck_clean" dbcheck_clean
testit_expect_failure "dbcheck_acl_reset" dbcheck_acl_reset
testit "dbcheck_acl_reset_clean" dbcheck_acl_reset_clean
testit "add_userparameters0" add_userparameters1
testit "add_userparameters1" add_userparameters1
testit "add_userparameters2" add_userparameters2
testit "add_userparameters3" add_userparameters3
testit_expect_failure "dbcheck2" dbcheck2
testit "dbcheck_clean2" dbcheck_clean2
testit "rm_deleted_objects" rm_deleted_objects
testit_expect_failure "dbcheck3" dbcheck3
testit "dbcheck_clean3" dbcheck_clean3
testit "check_expected_after_deleted_objects" check_expected_after_deleted_objects
testit "referenceprovision" referenceprovision
testit "ldapcmp" ldapcmp
testit "ldapcmp_sd" ldapcmp_sd
else
subunit_start_test $RELEASE
subunit_skip_test $RELEASE <<EOF
no test provision
EOF
subunit_start_test "reindex"
subunit_skip_test "reindex" <<EOF
no test provision
EOF
subunit_start_test check_expected_before_values
subunit_skip_test check_expected_before_values<<EOF
no test provision
EOF
subunit_start_test "dbcheck"
subunit_skip_test "dbcheck" <<EOF
no test provision
EOF
subunit_start_test "dbcheck_clean"
subunit_skip_test "dbcheck_clean" <<EOF
no test provision
EOF
subunit_start_test check_expected_after_values
subunit_skip_test check_expected_after_values<<EOF
no test provision
EOF
subunit_start_test "dbcheck_acl_reset"
subunit_skip_test "dbcheck_acl_reset" <<EOF
no test provision
EOF
subunit_start_test "dbcheck_clean_acl_reset"
subunit_skip_test "dbcheck_clean_acl_reset" <<EOF
no test provision
EOF
subunit_start_test add_userparameters0
subunit_skip_test add_userparameters0<<EOF
no test provision
EOF
subunit_start_test add_userparameters1
subunit_skip_test add_userparameters1<<EOF
no test provision
EOF
subunit_start_test add_userparameters2
subunit_skip_test add_userparameters2<<EOF
no test provision
EOF
subunit_start_test add_userparameters3
subunit_skip_test add_userparameters3<<EOF
no test provision
EOF
subunit_start_test check_expected_before_values
subunit_skip_test check_expected_before_values<<EOF
no test provision
EOF
subunit_start_test "dbcheck2"
subunit_skip_test "dbcheck2" <<EOF
no test provision
EOF
subunit_start_test "referenceprovision"
subunit_skip_test "referenceprovision" <<EOF
no test provision
EOF
subunit_start_test "ldapcmp"
subunit_skip_test "ldapcmp" <<EOF
no test provision
EOF
subunit_start_test "ldapcmp_sd"
subunit_skip_test "ldapcmp_sd" <<EOF
no test provision
EOF
fi
if [ -d $PREFIX_ABS/${RELEASE} ]; then
rm -fr $PREFIX_ABS/${RELEASE}
fi
if [ -d $PREFIX_ABS/${RELEASE}_reference ]; then
rm -fr $PREFIX_ABS/${RELEASE}_reference
fi
exit $failed