samba-mirror/ctdb/config/functions

# Hey Emacs, this is a -*- shell-script -*- !!!

# utility functions for ctdb event scripts

if [ -z "$CTDB_BASE" ]; then
	echo 'CTDB_BASE unset in CTDB functions file'
	exit 1
fi
export CTDB_BASE

# CTDB_VARDIR is used elsewhere
# shellcheck disable=SC2034
CTDB_VARDIR="/usr/local/var/lib/ctdb"

CTDB="${CTDB:-/usr/local/bin/ctdb}"

# Only (and always) override these variables in test code

if [ -z "$CTDB_SCRIPT_VARDIR" ]; then
	CTDB_SCRIPT_VARDIR="/usr/local/var/lib/ctdb/scripts"
fi

if [ -z "$CTDB_SYS_ETCDIR" ]; then
	CTDB_SYS_ETCDIR="/etc"
fi

if [ -z "$CTDB_HELPER_BINDIR" ]; then
	CTDB_HELPER_BINDIR="/usr/local/libexec/ctdb"
fi

#######################################
# pull in a system config file, if any

load_system_config()
{
	for _i; do

		if [ -f "${CTDB_SYS_ETCDIR}/sysconfig/${_i}" ]; then
			. "${CTDB_SYS_ETCDIR}/sysconfig/${_i}"
			return
		elif [ -f "${CTDB_SYS_ETCDIR}/default/${_i}" ]; then
			. "${CTDB_SYS_ETCDIR}/default/${_i}"
			return
		fi
	done
}

# load_script_options [ component script ]
#   script is an event script name relative to a component
#   component is currently ignored
load_script_options()
{
	if [ $# -eq 2 ]; then
		_script="$2"
	elif [ $# -eq 0 ]; then
		_script=""
	else
		die "usage: load_script_options [ component script ]"
	fi

	_options="${CTDB_BASE}/script.options"

	if [ -r "$_options" ]; then
		. "$_options"
	fi

	if [ -n "$_script" ]; then
		_s="${CTDB_BASE}/events/legacy/${_script}"
	else
		_s="${0%.script}"
	fi
	_options="${_s}.options"

	if [ -r "$_options" ]; then
		. "$_options"
	fi
}

##############################################################

die()
{
	_msg="$1"
	_rc="${2:-1}"

	echo "$_msg" >&2
	exit "$_rc"
}

# Log given message or stdin to either syslog or a CTDB log file
# $1 is the tag passed to logger if syslog is in use.
script_log()
{
	_tag="$1"
	shift

	case "$CTDB_LOGGING" in
	file:)
		if [ -n "$*" ] ; then
			echo "$*"
		else
			cat
		fi >&2
		;;
	file:* | "")
		if [ -n "$CTDB_LOGGING" ]; then
			_file="${CTDB_LOGGING#file:}"
		else
			_file="/usr/local/var/log/log.ctdb"
		fi
		{
			if [ -n "$*" ]; then
				echo "$*"
			else
				cat
			fi
		} >>"$_file"
		;;
	*)
		# Handle all syslog:* variants here too.  There's no tool to do
		# the lossy things, so just use logger.
		logger -t "ctdbd: ${_tag}" "$@"
		;;
	esac
}

# When things are run in the background in an eventscript then logging
# output might get lost.  This is the "solution".  :-)
background_with_logging()
{
	(
		"$@" 2>&1 </dev/null |
			script_log "${script_name}&"
	) &

	return 0
}

##############################################################
# check number of args for different events
ctdb_check_args()
{
	case "$1" in
	takeip | releaseip)
		if [ $# != 4 ]; then
			echo "ERROR: must supply interface, IP and maskbits"
			exit 1
		fi
		;;
	updateip)
		if [ $# != 5 ]; then
			echo "ERROR: must supply old interface, new interface, IP and maskbits"
			exit 1
		fi
		;;
	esac
}

##############################################################
# determine on what type of system (init style) we are running
detect_init_style()
{
	_init_style_file="${CTDB_SCRIPT_VARDIR}/init-style"

	if [ ! -f "$_init_style_file" ]; then
		if [ -n "$CTDB_INIT_STYLE" ]; then
			echo "$CTDB_INIT_STYLE" >"$_init_style_file"
			return
		fi

		# Subshell to contain variables in os-release file
		(
			_os_release="${CTDB_SYS_ETCDIR}/os-release"
			if [ -f "$_os_release" ]; then
				. "$_os_release"
				case "$ID" in
				centos | fedora | rhel)
					echo "redhat"
					;;
				debian | ubuntu)
					echo "debian"
					;;
				sles | suse)
					echo "suse"
					;;
				*)
					case "$ID_LIKE" in
					*centos* | *rhel*)
						echo "redhat"
						;;
					*)
						echo "$ID"
						;;
					esac
					;;
				esac
			else
				echo "WARNING: unknown distribution ${ID}" >&2
				echo "unknown"
			fi
		) >"$_init_style_file"
	fi

	read -r CTDB_INIT_STYLE <"$_init_style_file"
}

######################################################
# simulate /sbin/service on platforms that don't have it
# _service() makes it easier to hook the service() function for
# testing.
_service()
{
	_service_name="$1"
	_op="$2"

	# do nothing, when no service was specified
	[ -z "$_service_name" ] && return

	if [ -x /sbin/service ]; then
		$_nice /sbin/service "$_service_name" "$_op"
	elif [ -x /usr/sbin/service ]; then
		$_nice /usr/sbin/service "$_service_name" "$_op"
	elif [ -x /bin/systemctl ]; then
		$_nice /bin/systemctl "$_op" "$_service_name"
	elif [ -x "${CTDB_SYS_ETCDIR}/init.d/${_service_name}" ]; then
		$_nice "${CTDB_SYS_ETCDIR}/init.d/${_service_name}" "$_op"
	elif [ -x "${CTDB_SYS_ETCDIR}/rc.d/init.d/${_service_name}" ]; then
		$_nice "${CTDB_SYS_ETCDIR}/rc.d/init.d/${_service_name}" "$_op"
	fi
}

service()
{
	_nice=""
	_service "$@"
}

######################################################
# simulate /sbin/service (niced) on platforms that don't have it
nice_service()
{
	_nice="nice"
	_service "$@"
}

######################################################
# Cached retrieval of PNN from local node.  This never changes so why
# open a client connection to the server each time this is needed?
ctdb_get_pnn()
{
	_pnn_file="${CTDB_SCRIPT_VARDIR}/my-pnn"
	if [ ! -f "$_pnn_file" ]; then
		$CTDB pnn >"$_pnn_file"
	fi

	cat "$_pnn_file"
}

# Cached retrieval of private IP address from local node.  This never
# changes.
ctdb_get_ip_address()
{
	_ip_addr_file="${CTDB_SCRIPT_VARDIR}/my-ip-address"
	if [ ! -f "$_ip_addr_file" ]; then
		$CTDB -X nodestatus |
			awk -F '|' 'NR == 2 { print $3 }' >"$_ip_addr_file"
	fi

	cat "$_ip_addr_file"
}

# Cache of public IP addresses assigned to this node.  This function
# exists mainly so statd_callout does not need to talk to ctdbd, so
# can be run as non-root, but it may be used in other places.  This
# must be updated/refreshed on failover.  This is done in
# 10.interface, but doing it in "ipreallocated" isn't enough because
# clients may connect as soon as "takeip" completes.  Also, the VNN in
# the daemon is only updated after the "releaseip" event completes, so
# "ctdb -X ip" can't be relied on there.  Hence, complex updates
# involving locking for "takeip" & "releaseip".  A future
# restructuring of the failover model will obsolete all of these
# moving parts.
CTDB_MY_PUBLIC_IPS_CACHE="${CTDB_SCRIPT_VARDIR}/my-public-ip-addresses"
update_my_public_ip_addresses()
{
	_event="$1"

	_f="$CTDB_MY_PUBLIC_IPS_CACHE"
	_lock="${_f}.lock"

	# In private CTDB state directory - no $$ security issue
	_new="${_f}.new.$$"
	{
		flock --timeout 10 9 ||
			die "ctdb_get_my_public_ip_addresses: timeout"

		case "$_event" in
		takeip)
			_ip="$2"
			# Redirect of stderr guards against initial
			# missing file
			cat "$_f" 2>/dev/null >"$_new"
			echo "$_ip" >>"$_new"
			;;
		releaseip)
			_ip="$2"
			# Redirect of stderr guards against initial
			# missing file, which shouldn't happen in
			# releaseip...
			grep -Fvx "$_ip" "$_f" 2>/dev/null >"$_new"
			;;
		ipreallocated)
			_pnn=$(ctdb_get_pnn)
			$CTDB -X ip |
				awk -F'|' -v pnn="$_pnn" \
				    '$3 == pnn {print $2}' >"$_new"
			;;
		esac

		mv "$_new" "$_f"

	} 9>"$_lock"
}

# Cached retrieval of database options for use by event scripts.
#
# If the variables are already set then they should not be overwritten
# - this should only happen during event script testing.
ctdb_get_db_options()
{
	_db_opts_file="${CTDB_SCRIPT_VARDIR}/db_options.cache"

	if [ ! -f "$_db_opts_file" ]; then
		{
			ctdb_translate_option "database" \
				"volatile database directory" \
				"CTDB_DBDIR"
			ctdb_translate_option "database" \
				"persistent database directory" \
				"CTDB_DBDIR_PERSISTENT"
			ctdb_translate_option "database" \
				"state database directory" \
				"CTDB_DBDIR_STATE"
		} >"$_db_opts_file"
	fi

	. "$_db_opts_file"
}

ctdb_translate_option()
{
	_section="$1"
	_opt="$2"
	_variable="$3"

	# ctdb-config already prints an error if something goes wrong
	_t=$("${CTDB_HELPER_BINDIR}/ctdb-config" get "$_section" "$_opt") ||
		exit $?
	echo "${_variable}=\"${_t}\""
}

######################################################
# wrapper around /proc/ settings to allow them to be hooked
# for testing
# 1st arg is relative path under /proc/, 2nd arg is value to set
set_proc()
{
	echo "$2" >"/proc/$1"
}

set_proc_maybe()
{
	if [ -w "/proc/$1" ]; then
		set_proc "$1" "$2"
	fi
}

######################################################
# wrapper around getting file contents from /proc/ to allow
# this to be hooked for testing
# 1st arg is relative path under /proc/
get_proc()
{
	cat "/proc/$1"
}

######################################################
# Print up to $_max kernel stack traces for processes named $_program
program_stack_traces()
{
	_prog="$1"
	_max="${2:-1}"

	_count=1
	for _pid in $(pidof "$_prog"); do
		[ "$_count" -le "$_max" ] || break

		# Do this first to avoid racing with process exit
		_stack=$(get_proc "${_pid}/stack" 2>/dev/null)
		if [ -n "$_stack" ]; then
			echo "Stack trace for ${_prog}[${_pid}]:"
			echo "$_stack"
			_count=$((_count + 1))
		fi
	done
}

######################################################
# Ensure $service_name is set
assert_service_name()
{
	# service_name is set by the event script
	# shellcheck disable=SC2154
	[ -n "$service_name" ] || die "INTERNAL ERROR: \$service_name not set"
}

######################################################
# check a set of directories is available
# return 1 on a missing directory
# directories are read from stdin
######################################################
ctdb_check_directories_probe()
{
	while IFS="" read -r d; do
		case "$d" in
		*%*)
			continue
			;;
		*)
			[ -d "${d}/." ] || return 1
			;;
		esac
	done
}

######################################################
# check a set of directories is available
# directories are read from stdin
######################################################
ctdb_check_directories()
{
	ctdb_check_directories_probe || {
		echo "ERROR: $service_name directory \"$d\" not available"
		exit 1
	}
}

######################################################
# check a set of tcp ports
# usage: ctdb_check_tcp_ports <ports...>
######################################################

# Check whether something is listening on all of the given TCP ports
# using the "ctdb checktcpport" command.
ctdb_check_tcp_ports()
{
	if [ -z "$1" ]; then
		echo "INTERNAL ERROR: ctdb_check_tcp_ports - no ports specified"
		exit 1
	fi

	for _p; do # process each function argument (port)
		_cmd="$CTDB checktcpport $_p"
		_out=$($_cmd 2>&1)
		_ret=$?
		case "$_ret" in
		0)
			echo "$service_name not listening on TCP port $_p"
			return 1
			;;
		98)
			# Couldn't bind, something already listening, next port
			continue
			;;
		*)
			echo "unexpected error (${_ret}) running \"${_cmd}\""
			if [ -n "$_out" ]; then
				echo "$_out"
			fi
			return $_ret
			;;
		esac
	done

	# All ports listening
	return 0
}

######################################################
# check a unix socket
# usage: ctdb_check_unix_socket SOCKPATH
######################################################
ctdb_check_unix_socket()
{
	_sockpath="$1"

	if [ -z "$_sockpath" ]; then
		echo "ERROR: ctdb_check_unix_socket() requires socket path"
		return 1
	fi

	_out=$(ss -l -xH "src ${_sockpath}")
	if [ -z "$_out" ]; then
		echo "ERROR: ${service_name} not listening on ${_sockpath}"
		return 1
	fi
}

################################################
# kill off any TCP connections with the given IP
################################################
kill_tcp_connections()
{
	_iface="$1"
	_ip="$2"

	_oneway=false
	if [ "$3" = "oneway" ]; then
		_oneway=true
	fi

	get_tcp_connections_for_ip "$_ip" | {
		_killcount=0
		_connections=""
		_nl="
"
		while read -r _dst _src; do
			_destport="${_dst##*:}"
			__oneway=$_oneway
			case $_destport in
			# we only do one-way killtcp for CIFS
			139 | 445) __oneway=true ;;
			esac

			_connections="${_connections}${_nl}${_src} ${_dst}"
			if ! $__oneway; then
				_connections="${_connections}${_nl}${_dst} ${_src}"
			fi

			_killcount=$((_killcount + 1))
		done

		if [ $_killcount -eq 0 ]; then
			return
		fi

		if [ -n "$CTDB_KILLTCP_DEBUGLEVEL" ]; then
			_debuglevel="$CTDB_KILLTCP_DEBUGLEVEL"
		else
			_debuglevel="$CTDB_DEBUGLEVEL"
		fi
		echo "$_connections" |
			CTDB_DEBUGLEVEL="$_debuglevel" \
				"${CTDB_HELPER_BINDIR}/ctdb_killtcp" "$_iface" || {
			echo "Failed to kill TCP connections"
			return
		}

		_connections=$(get_tcp_connections_for_ip "$_ip")
		if [ -z "$_connections" ]; then
			_remaining=0
		else
			_remaining=$(echo "$_connections" | wc -l)
		fi

		_actually_killed=$((_killcount - _remaining))

		_t="${_actually_killed}/${_killcount}"
		echo "Killed ${_t} TCP connections to released IP $_ip"

		if [ -n "$_connections" ]; then
			echo "Remaining connections:"
			echo "$_connections" | sed -e 's|^|  |'
		fi
	}
}

##################################################################
# kill off the local end for any TCP connections with the given IP
##################################################################
kill_tcp_connections_local_only()
{
	kill_tcp_connections "$@" "oneway"
}

##################################################################
# tickle any TCP connections with the given IP
##################################################################
tickle_tcp_connections()
{
	_ip="$1"

	# Get connections, both directions
	_conns=$(get_tcp_connections_for_ip "$_ip" |
		awk '{ print $1, $2 ; print $2, $1 }')

	echo "$_conns" | awk '{ print "Tickle TCP connection", $1, $2 }'
	echo "$_conns" | ctdb tickle
}

get_tcp_connections_for_ip()
{
	_ip="$1"

	ss -tnH state established "src [$_ip]" | awk '{print $3, $4}'
}

########################################################

add_ip_to_iface()
{
	_iface=$1
	_ip=$2
	_maskbits=$3

	# Ensure interface is up
	ip link set "$_iface" up ||
		die "Failed to bringup interface $_iface"

	# Only need to define broadcast for IPv4
	case "$_ip" in
	*:*) _bcast="" ;;
	*) _bcast="brd +" ;;
	esac

	# Intentionally unquoted multi-word value here
	# shellcheck disable=SC2086
	ip addr add "$_ip/$_maskbits" $_bcast dev "$_iface" || {
		echo "Failed to add $_ip/$_maskbits on dev $_iface"
		return 1
	}

	# Wait 5 seconds for IPv6 addresses to stop being tentative...
	if [ -z "$_bcast" ]; then
		for _x in $(seq 1 10); do
			ip addr show to "${_ip}/128" | grep -q "tentative" || break
			sleep 0.5
		done

		# If the address was a duplicate then it won't be on the
		# interface so flag an error.
		_t=$(ip addr show to "${_ip}/128")
		case "$_t" in
		"")
			echo "Failed to add $_ip/$_maskbits on dev $_iface"
			return 1
			;;
		*tentative* | *dadfailed*)
			echo "Failed to add $_ip/$_maskbits on dev $_iface"
			ip addr del "$_ip/$_maskbits" dev "$_iface"
			return 1
			;;
		esac
	fi
}

delete_ip_from_iface()
{
	_iface=$1
	_ip=$2
	_maskbits=$3

	# This could be set globally for all interfaces but it is probably
	# better to avoid surprises, so limit it the interfaces where CTDB
	# has public IP addresses.  There isn't anywhere else convenient
	# to do this so just set it each time.  This is much cheaper than
	# remembering and re-adding secondaries.
	set_proc "sys/net/ipv4/conf/${_iface}/promote_secondaries" 1

	ip addr del "$_ip/$_maskbits" dev "$_iface" || {
		echo "Failed to del $_ip on dev $_iface"
		return 1
	}
}

# If the given IP is hosted then print 2 items: maskbits and iface
ip_maskbits_iface()
{
	_addr="$1"

	case "$_addr" in
	*:*) _bits=128 ;;
	*) _bits=32 ;;
	esac
	ip addr show to "${_addr}/${_bits}" 2>/dev/null |
		awk 'NR == 1 { iface = $2; sub(":$", "", iface) ;
		       sub("@.*", "", iface) }
             $1 ~ /inet/ { mask = $2; sub(".*/", "", mask);
                           print mask, iface }'
}

drop_ip()
{
	_addr="${1%/*}" # Remove optional maskbits

	# Intentional word splitting here
	# shellcheck disable=SC2046
	set -- $(ip_maskbits_iface "$_addr")
	if [ -n "$1" ]; then
		_maskbits="$1"
		_iface="$2"
		echo "Removing public address $_addr/$_maskbits from device $_iface"
		delete_ip_from_iface "$_iface" "$_addr" "$_maskbits" >/dev/null 2>&1
	fi
}

have_public_addresses()
{
	[ -f "${CTDB_BASE}/public_addresses" ]
}

# This sets $public_ifaces as a side-effect.
get_public_ifaces()
{
	# Get all the interfaces listed in the public_addresses file
	public_ifaces=$(sed -e '/^#.*/d' \
		-e 's/^[^\t ]*[\t ]*//' \
		-e 's/,/ /g' \
		-e 's/[\t ]*$//' "${CTDB_BASE}/public_addresses")

	# Get the interfaces for which CTDB has public IPs configured.
	# That is, for all but the 1st line, get the 1st field.
	ctdb_ifaces=$($CTDB -X ifaces | sed -e '1d' -e 's@^|@@' -e 's@|.*@@')

	# Add $ctdb_ifaces and make $public_ifaces unique
	# Use word splitting to squash whitespace
	# shellcheck disable=SC2086
	public_ifaces=$(echo $public_ifaces $ctdb_ifaces | tr ' ' '\n' | sort -u)
}

drop_all_public_ips()
{
	# _x is intentionally ignored
	# shellcheck disable=SC2034
	while read -r _ip _x; do
		case "$_ip" in
		\#*) continue ;;
		esac
		drop_ip "$_ip"
	done <"${CTDB_BASE}/public_addresses"
}

flush_route_cache()
{
	set_proc_maybe sys/net/ipv4/route/flush 1
	set_proc_maybe sys/net/ipv6/route/flush 1
}

########################################################
# Interface monitoring

# If the interface is a virtual one (e.g. VLAN) then get the
# underlying interface
interface_get_real()
{
	_iface="$1"

	# If $_iface is a VLAN (i.e. contains an '@') then strip every
	# before the '@', otherwise print the whole interface
	echo "${_iface##*@}"
}

# Check whether an interface is operational
interface_monitor()
{
	_iface="$1"

	_iface_info=$(ip -br link show "$_iface" 2>&1) || {
		echo "ERROR: Monitored interface ${_iface} does not exist"
		return 1
	}

	# If the interface is a virtual one (e.g. VLAN) then get the
	# underlying interface.
	_realiface=$(interface_get_real "${_iface_info%% *}")

	if _bi=$(get_proc "net/bonding/${_realiface}" 2>/dev/null); then
		# This is a bond: various monitoring strategies
		echo "$_bi" | grep -q 'Currently Active Slave: None' && {
			echo "ERROR: No active slaves for bond device ${_realiface}"
			return 1
		}
		echo "$_bi" | grep -q '^MII Status: up' || {
			echo "ERROR: public network interface ${_realiface} is down"
			return 1
		}
		echo "$_bi" | grep -q '^Bonding Mode: IEEE 802.3ad Dynamic link aggregation' && {
			# This works around a bug in the driver where the
			# overall bond status can be up but none of the actual
			# physical interfaces have a link.
			echo "$_bi" | grep 'MII Status:' | tail -n +2 | grep -q '^MII Status: up' || {
				echo "ERROR: No active slaves for 802.ad bond device ${_realiface}"
				return 1
			}
		}

		return 0
	else
		# Not a bond
		case "$_iface" in
		lo*)
			# loopback is always working
			return 0
			;;
		ib*)
			# we don't know how to test ib links
			return 0
			;;
		*)
			ethtool "$_iface" | grep -q 'Link detected: yes' || {
				# On some systems, this is not successful when a
				# cable is plugged but the interface has not been
				# brought up previously. Bring the interface up
				# and try again...
				ip link set "$_iface" up
				ethtool "$_iface" | grep -q 'Link detected: yes' || {
					echo "ERROR: No link on the public network interface ${_iface}"
					return 1
				}
			}
			return 0
			;;
		esac
	fi
}

########################################################
# Simple counters
_ctdb_counter_common()
{
	[ $# -le 1 ] || die "usage: _ctdb_counter_common [name]"

	if [ $# -eq 1 ]; then
		_counter_name="${1}.failcount"
	else
		_counter_name="failcount"
	fi

	if [ -z "$script_state_dir" ]; then
		die "ctdb_counter_* functions need ctdb_setup_state_dir()"
	fi

	_counter_file="${script_state_dir}/${_counter_name}"
}
# Some code passes an argument
# shellcheck disable=SC2120
ctdb_counter_init()
{
	_ctdb_counter_common "$1"

	: >"$_counter_file"
}
ctdb_counter_incr()
{
	_ctdb_counter_common "$1"

	# unary counting using newlines!
	echo >>"$_counter_file"
}
ctdb_counter_get()
{
	_ctdb_counter_common "$1"
	# unary counting!
	_val=$(wc -c 2>/dev/null <"$_counter_file" || echo 0)
	# Strip leading spaces from output of wc (on freebsd)
	# shellcheck disable=SC2086
	echo $_val
}
ctdb_counter_exists()
{
	_ctdb_counter_common "$1"
	[ -e "$_counter_file" ]
}

#
# Fail counter/threshold combination to control warnings and node unhealthy
#

_failcount_validate_threshold()
{
	case "$1" in
	"") return 1 ;; # A failure that doesn't need a warning
	*)
		if echo "$1" | grep -qx '[0-9]*'; then
			return 0
		fi

		echo "WARNING: ${1} is an invalid threshold in \"${2}\" check"
		return 1
		;;
	esac
}

_failcount_common()
{
	_thing="$1"

	_counter=$(echo "$_thing" | sed -e 's@/@_SLASH_@g' -e 's@ @_@g')
}

failcount_init()
{
	_thing="$1"

	_failcount_common "$_thing"

	ctdb_counter_init "$_counter"
}

failcount_reset()
{
	_thing="$1"

	_failcount_common "$_thing"

	_failcount=$(ctdb_counter_get "$_counter")
	if [ "$_failcount" -eq 0 ]; then
		return
	fi

	printf 'NOTICE: %s: no longer failing\n' "$_thing"
	ctdb_counter_init "$_counter"
}

failcount_incr()
{
	_thing="$1"
	_thresholds="$2"
	_output="$3"

	_failcount_common "$_thing"

	ctdb_counter_incr "$_counter"
	_failcount=$(ctdb_counter_get "$_counter")

	case "$_thresholds" in
	*:*)
		_warn_threshold="${_thresholds%:*}"
		_unhealthy_threshold="${_thresholds#*:}"
		;;
	"")
		_warn_threshold=1
		_unhealthy_threshold=""
		;;
	*)
		_warn_threshold="$_thresholds"
		_unhealthy_threshold=""
		;;
	esac

	if _failcount_validate_threshold "$_unhealthy_threshold" "$_thing"; then
		if [ "$_failcount" -ge "$_unhealthy_threshold" ]; then
			printf 'ERROR: %s: fail count %d >= threshold %d\n' \
			       "$_thing" \
			       "$_failcount" \
			       "$_unhealthy_threshold"
			# Only print output when exceeding the
			# unhealthy threshold
			if [ "$_failcount" -eq "$_unhealthy_threshold" ] && \
				   [ -n "$_output" ]; then
				echo "$_output"
			fi
			exit 1
		fi
	fi

	if _failcount_validate_threshold "$_warn_threshold" "$_thing"; then
		if [ "$_failcount" -lt "$_warn_threshold" ]; then
			return 0
		fi
	fi

	printf 'WARNING: %s: fail count %d >= threshold %d\n' \
	       "$_thing" \
	       "$_failcount" \
	       "$_warn_threshold"
	if [ "$_failcount" -eq "$_warn_threshold" ] && [ -n "$_output" ]; then
		# Only print output when exceeding the warning threshold
		echo "$_output"
	fi
}

########################################################

# ctdb_setup_state_dir <type> <name>
#   Sets/creates script_state_dir)
ctdb_setup_state_dir()
{
	[ $# -eq 2 ] || die "usage: ctdb_setup_state_dir <type> <name>"

	_type="$1"
	_name="$2"

	script_state_dir="${CTDB_SCRIPT_VARDIR}/${_type}/${_name}"

	mkdir -p "$script_state_dir" ||
		die "Error creating script state dir \"${script_state_dir}\""
}

##################################################################
# Reconfigure a service on demand

_ctdb_service_reconfigure_common()
{
	if [ -z "$script_state_dir" ]; then
		die "ctdb_service_*_reconfigure() needs ctdb_setup_state_dir()"
	fi

	_ctdb_service_reconfigure_flag="${script_state_dir}/need_reconfigure"
}

ctdb_service_needs_reconfigure()
{
	_ctdb_service_reconfigure_common
	[ -e "$_ctdb_service_reconfigure_flag" ]
}

ctdb_service_set_reconfigure()
{
	_ctdb_service_reconfigure_common
	: >"$_ctdb_service_reconfigure_flag"
}

ctdb_service_unset_reconfigure()
{
	_ctdb_service_reconfigure_common
	rm -f "$_ctdb_service_reconfigure_flag"
}

ctdb_service_reconfigure()
{
	echo "Reconfiguring service \"${service_name}\"..."
	ctdb_service_unset_reconfigure
	service_reconfigure || return $?
	# Intentionally have this use $service_name as default
	# shellcheck disable=SC2119
	ctdb_counter_init
}

# Default service_reconfigure() function does nothing.
service_reconfigure()
{
	:
}

# Default service_start() and service_stop() functions.

# These may be overridden in an eventscript.
service_start()
{
	service "$service_name" start
}

service_stop()
{
	service "$service_name" stop
}

##################################################################

# This exists only for backward compatibility with 3rd party scripts
# that call it
ctdb_standard_event_handler()
{
	:
}

iptables_wrapper()
{
	_family="$1"
	shift
	if [ "$_family" = "inet6" ]; then
		_iptables_cmd="ip6tables"
	else
		_iptables_cmd="iptables"
	fi

	# iptables doesn't like being re-entered, so flock-wrap it.
	flock -w 30 "${CTDB_SCRIPT_VARDIR}/iptables.flock" "$_iptables_cmd" "$@"
}

# AIX (and perhaps others?) doesn't have mktemp
# type is commonly supported and more portable than which(1)
# shellcheck disable=SC2039
if ! type mktemp >/dev/null 2>&1; then
	mktemp()
	{
		_dir=false
		if [ "$1" = "-d" ]; then
			_dir=true
			shift
		fi
		_d="${TMPDIR:-/tmp}"
		_hex10=$(dd if=/dev/urandom count=20 2>/dev/null |
			cksum |
			awk '{print $1}')
		_t="${_d}/tmp.${_hex10}"
		(
			umask 077
			if $_dir; then
				mkdir "$_t"
			else
				: >"$_t"
			fi
		)
		echo "$_t"
	}
fi

######################################################################
# NFS callout handling

nfs_callout_init()
{
	_state_dir="$1"

	if [ -z "$CTDB_NFS_CALLOUT" ]; then
		CTDB_NFS_CALLOUT="${CTDB_BASE}/nfs-linux-kernel-callout"
	fi
	# Always export, for statd callout
	export CTDB_NFS_CALLOUT

	# If the callout wants to use this then it must create it
	export CTDB_NFS_CALLOUT_STATE_DIR="${_state_dir}/callout-state"

	# Export, if set, for use by clustered NFS callouts
	if [ -n "$CTDB_NFS_STATE_FS_TYPE" ]; then
		export CTDB_NFS_STATE_FS_TYPE
	fi
	if [ -n "$CTDB_NFS_STATE_MNT" ]; then
		export CTDB_NFS_STATE_MNT
	fi
	if [ -n "$CTDB_NFS_EXPORTS_FILE" ]; then
		export CTDB_NFS_EXPORTS_FILE
	fi

	nfs_callout_cache="${_state_dir}/nfs_callout_cache"
	nfs_callout_cache_callout="${nfs_callout_cache}/CTDB_NFS_CALLOUT"
	nfs_callout_cache_ops="${nfs_callout_cache}/ops"
}

nfs_callout_register()
{
	mkdir -p "$nfs_callout_cache_ops"
	rm -f "$nfs_callout_cache_ops"/*

	echo "$CTDB_NFS_CALLOUT" >"$nfs_callout_cache_callout"

	_t=$("$CTDB_NFS_CALLOUT" "register")
	if [ -n "$_t" ]; then
		echo "$_t" |
			while IFS="" read -r _op; do
				touch "${nfs_callout_cache_ops}/${_op}"
			done
	else
		touch "${nfs_callout_cache_ops}/ALL"
	fi
}

nfs_callout()
{
	# Re-run registration if $CTDB_NFS_CALLOUT has changed
	_prev=""
	if [ -r "$nfs_callout_cache_callout" ]; then
		read -r _prev <"$nfs_callout_cache_callout"
	fi
	if [ "$CTDB_NFS_CALLOUT" != "$_prev" ]; then
		nfs_callout_register
	fi

	# Run the operation if it is registered...
	if [ -e "${nfs_callout_cache_ops}/${1}" ] ||
		[ -e "${nfs_callout_cache_ops}/ALL" ]; then
		"$CTDB_NFS_CALLOUT" "$@"
	fi
}

########################################################
# tickle handling
########################################################

update_tickles()
{
	_port="$1"

	tickledir="${CTDB_SCRIPT_VARDIR}/tickles"
	mkdir -p "$tickledir"

	# If not hosting any public IPs then can't have any connections...
	if [ ! -s "$CTDB_MY_PUBLIC_IPS_CACHE" ]; then
		return
	fi

	# IPs and port as ss filters
	_ip_filter=""
	while read -r _ip; do
		_ip_filter="${_ip_filter}${_ip_filter:+ || }src [${_ip}]"
	done <"$CTDB_MY_PUBLIC_IPS_CACHE"
	_port_filter="sport == :${_port}"

	# Record connections to our public IPs in a temporary file.
	# This temporary file is in CTDB's private state directory and
	# $$ is used to avoid a very rare race involving CTDB's script
	# debugging.  No security issue, nothing to see here...
	_my_connections="${tickledir}/${_port}.connections.$$"
	# Parentheses are needed around the filters for precedence but
	# the parentheses can't be empty!
	ss -tnH state established \
		"${_ip_filter:+( ${_ip_filter} )}" \
		"${_port_filter:+( ${_port_filter} )}" |
		awk '{print $4, $3}' |
		sort >"$_my_connections"

	# Record our current tickles in a temporary file
	_my_tickles="${tickledir}/${_port}.tickles.$$"
	while read -r _i; do
		$CTDB -X gettickles "$_i" "$_port" |
			awk -F'|' 'NR > 1 { printf "%s:%s %s:%s\n", $2, $3, $4, $5 }'
	done <"$CTDB_MY_PUBLIC_IPS_CACHE" |
		sort >"$_my_tickles"

	# Add tickles for connections that we haven't already got tickles for
	comm -23 "$_my_connections" "$_my_tickles" |
		$CTDB addtickle

	# Remove tickles for connections that are no longer there
	comm -13 "$_my_connections" "$_my_tickles" |
		$CTDB deltickle

	rm -f "$_my_connections" "$_my_tickles"

	# Remove stale files from killed scripts
	# Files can't have spaces in name, more portable than -print0/-0
	# shellcheck disable=SC2038
	(cd "$tickledir" && find . -type f -mmin +10 | xargs -r rm)
}

########################################################
# load a site local config file
########################################################

[ -x "${CTDB_BASE}/rc.local" ] && {
	. "${CTDB_BASE}/rc.local"
}

[ -d "${CTDB_BASE}/rc.local.d" ] && {
	for i in "${CTDB_BASE}/rc.local.d"/*; do
		[ -x "$i" ] && . "$i"
	done
}

script_name="${0##*/}" # basename