samba-mirror/source3/script/tests/test_smbclient_s3.sh

#!/bin/sh

# this runs the file serving tests that are expected to pass with samba3

if [ $# -lt 13 ]; then
	cat <<EOF
Usage: test_smbclient_s3.sh SERVER SERVER_IP DOMAIN USERNAME PASSWORD USERID LOCAL_PATH PREFIX SMBCLIENT WBINFO NET CONFIGURATION PROTOCOL
EOF
	exit 1
fi

SERVER="${1}"
SERVER_IP="${2}"
DOMAIN="${3}"
USERNAME="${4}"
PASSWORD="${5}"
USERID="${6}"
LOCAL_PATH="${7}"
PREFIX="${8}"
SMBCLIENT="${9}"
WBINFO="${10}"
NET="${11}"
CONFIGURATION="${12}"
PROTOCOL="${13}"
SMBCLIENT="$VALGRIND ${SMBCLIENT}"
WBINFO="$VALGRIND ${WBINFO}"
shift 13
RAWARGS="${CONFIGURATION} -m${PROTOCOL}"
ADDARGS="${RAWARGS} $*"

incdir=$(dirname $0)/../../../testprogs/blackbox
. $incdir/subunit.sh

failed=0

# Do not let deprecated option warnings muck this up
SAMBA_DEPRECATED_SUPPRESS=1
export SAMBA_DEPRECATED_SUPPRESS

# Test that a noninteractive smbclient does not prompt
test_noninteractive_no_prompt()
{
	prompt="smb"

	cmd='echo du | $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)

	if [ $? != 0 ]; then
		echo "$out"
		echo "command failed"
		return 1
	fi

	echo "$out" | grep $prompt >/dev/null 2>&1

	if [ $? = 0 ]; then
		# got a prompt .. fail
		echo matched interactive prompt in non-interactive mode
		return 1
	fi

	return 0
}

# Test that an interactive smbclient prompts to stdout
test_interactive_prompt_stdout()
{
	prompt="smb"
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands

	cat >$tmpfile <<EOF
du
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "command failed"
		return 1
	fi

	echo "$out" | grep $prompt >/dev/null 2>&1

	if [ $? != 0 ]; then
		echo failed to match interactive prompt on stdout
		return 1
	fi

	return 0
}

# Test creating a bad symlink and deleting it.
test_bad_symlink()
{
	prompt="posix_unlink deleted file /newname"
	tmpfile=$PREFIX/smbclient_bad_symlinks_commands

	cat >$tmpfile <<EOF
posix
posix_unlink newname
symlink badname newname
posix_unlink newname
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed create then delete bad symlink with error $ret"
		return 1
	fi

	echo "$out" | grep "$prompt" >/dev/null 2>&1

	ret=$?
	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed create then delete bad symlink - grep failed with $ret"
		return 1
	fi

	return 0
}

# Test creating a good symlink and deleting it by path.
test_good_symlink()
{
	tmpfile=$PREFIX/smbclient.in.$$
	slink_name="$LOCAL_PATH/slink"
	slink_target="$LOCAL_PATH/slink_target"

	touch $slink_target
	ln -s $slink_target $slink_name
	cat >$tmpfile <<EOF
del slink
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed delete good symlink with error $ret"
		rm $slink_target
		rm $slink_name
		return 1
	fi

	if [ ! -e $slink_target ]; then
		echo "failed delete good symlink - symlink target deleted !"
		rm $slink_target
		rm $slink_name
		return 1
	fi

	if [ -e $slink_name ]; then
		echo "failed delete good symlink - symlink still exists"
		rm $slink_target
		rm $slink_name
		return 1
	fi

	rm $slink_target
	return 0
}

# Test writing into a read-only directory (logon as guest) fails.
test_read_only_dir()
{
	prompt="NT_STATUS_ACCESS_DENIED making remote directory"
	tmpfile=$PREFIX/smbclient.in.$$

	##
	## We can't do this as non-root. We always have rights to
	## create the directory.
	##
	if [ "$USERID" != 0 ]; then
		echo "skipping test_read_only_dir as non-root"
		return 0
	fi

	##
	## We can't do this with an encrypted connection. No credentials
	## to set up the channel.
	##
	if [ "$ADDARGS" = "-e" ]; then
		echo "skipping test_read_only_dir with encrypted connection"
		return 0
	fi

	cat >$tmpfile <<EOF
mkdir a_test_dir
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT -U% "//$SERVER/$1" -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed writing into read-only directory with error $ret"

		return 1
	fi

	echo "$out" | grep "$prompt" >/dev/null 2>&1

	ret=$?
	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed writing into read-only directory - grep failed with $ret"
		return 1
	fi

	return 0
}

# Test sending a message
test_message()
{
	tmpfile=$PREFIX/message_in.$$

	cat >$tmpfile <<EOF
Test message from pid $$
EOF

	cmd='$SMBCLIENT "$@" -U$USERNAME%$PASSWORD -M $SERVER -p 139 $ADDARGS -n msgtest < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed sending message to $SERVER with error $ret"
		rm -f $tmpfile
		return 1
	fi

	# The server writes this into a file message.msgtest, via message.%m to test the % sub code
	cmd='$SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmpguest -p 139 $ADDARGS -c "get message.msgtest $PREFIX/message_out.$$" 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed getting sent message from $SERVER with error $ret"
		return 1
	fi

	if cmp $PREFIX/message_out.$$ $tmpfile; then
		echo "failed comparison of message from $SERVER"
		return 1
	fi

	return 0
}

# Test reading an owner-only file (logon as guest) fails.
test_owner_only_file()
{
	prompt="NT_STATUS_ACCESS_DENIED opening remote file"
	tmpfile=$PREFIX/smbclient.in.$$

	##
	## We can't do this as non-root. We always have rights to
	## read the file.
	##
	if [ "$USERID" != 0 ]; then
		echo "skipping test_owner_only_file as non-root"
		return 0
	fi

	##
	## We can't do this with an encrypted connection. No credentials
	## to set up the channel.
	##
	if [ "$ADDARGS" = "-e" ]; then
		echo "skipping test_owner_only_file with encrypted connection"
		return 0
	fi

	cat >$tmpfile <<EOF
get unreadable_file
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U% //$SERVER/ro-tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed reading owner-only file with error $ret"
		return 1
	fi

	echo "$out" | grep "$prompt" >/dev/null 2>&1

	ret=$?
	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed reading owner-only file - grep failed with $ret"
		return 1
	fi

	return 0
}

# Test accessing an msdfs path.
test_msdfs_link()
{
	tmpfile=$PREFIX/smbclient.in.$$
	prompt="  msdfs-target  "

	cmd='$SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS -m $PROTOCOL -c dir 2>&1'
	out=$(eval $cmd)
	ret=$?

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed listing msfds-share\ with error $ret"
		return 1
	fi

	cat >$tmpfile <<EOF
ls
cd \\msdfs-src1
ls msdfs-target
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed accessing \\msdfs-src1 link with error $ret"
		return 1
	fi

	echo "$out" | grep "$prompt" >/dev/null 2>&1

	ret=$?
	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed listing \\msdfs-src1 - grep failed with $ret"
		return 1
	fi

	cat >$tmpfile <<EOF
ls
cd \\deeppath\\msdfs-src2
ls msdfs-target
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed accessing \\deeppath\\msdfs-src2 link with error $ret"
		return 1
	fi

	echo "$out" | grep "$prompt" >/dev/null 2>&1

	ret=$?
	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed listing \\deeppath\\msdfs-src2 - grep failed with $ret"
		return 1
	fi

	return 0
}

# Test recursive listing across msdfs links
test_msdfs_recursive_dir()
{
	tmpfile=$PREFIX/smbclient.in.$$

	cat >$tmpfile <<EOF
recurse
dir
quit
EOF

	cmd='$SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS -m $PROTOCOL < $tmpfile 2>&1'
	out=$(eval $cmd)
	ret="$?"

	if [ "$ret" -ne 0 ]; then
		echo "$out"
		echo "failed listing msfds-share\ with error $ret"
		return 1
	fi

	echo "$out" | grep 'NT_STATUS_OBJECT_PATH_NOT_FOUND listing \widelinks\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\*' > /dev/null 2>&1

	ret="$?"
	if [ "$ret" -ne 0 ]; then
	    echo "$out"
	    echo "Listing \\msdfs-share recursively did not properly end in symlink recursion"
	fi

	return 0
}

# Test doing a normal file rename on an msdfs path.
test_msdfs_rename()
{
	tmpfile="$PREFIX/smbclient.in.$$"
	filename_src="src.$$"
	filename_dst="dest.$$"
	filename_src_path="$PREFIX/$filename_src"
	rm -f "$filename_src_path"
	touch "$filename_src_path"

	#
	# Use both non-force and force rename to
	# ensure we test both codepaths inside libsmb.
	#
	cat >$tmpfile <<EOF
lcd $PREFIX
put $filename_src
ren $filename_src $filename_dst -f
ren $filename_dst $filename_src
del $filename_src
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f "$tmpfile"
	rm -f "$filename_src_path"

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed renaming $filename_src $filename_dst with error $ret"
		return 1
	fi

	echo "$out" | grep "NT_STATUS" >/dev/null 2>&1

	ret="$?"
	if [ "$ret" -eq 0 ]; then
		echo "$out"
		echo "renaming $filename_src $filename_dst got NT_STATUS_ error"
		return 1
	fi
	return 0
}

# Test doing a normal file hardlink on an msdfs path.
test_msdfs_hardlink()
{
	tmpfile="$PREFIX/smbclient.in.$$"
	filename_src="src.$$"
	filename_dst="dest.$$"
	filename_src_path="$PREFIX/$filename_src"
	rm -f "$filename_src_path"
	touch "$filename_src_path"

	cat >$tmpfile <<EOF
lcd $PREFIX
put $filename_src
hardlink $filename_src $filename_dst
del $filename_src
del $filename_dst
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f "$tmpfile"
	rm -f "$filename_src_path"

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed hardlink $filename_src $filename_dst with error $ret"
		return 1
	fi

	echo "$out" | grep "NT_STATUS" >/dev/null 2>&1

	ret="$?"
	if [ "$ret" -eq 0 ]; then
		echo "$out"
		echo "hardlink $filename_src $filename_dst got NT_STATUS_ error"
		return 1
	fi
	return 0
}

test_msdfs_del()
{
    tmpfile="$PREFIX/smbclient.in.$$"
    filename_src="src.$$"
    filename_src_path="$PREFIX/$filename_src"
    rm -f "$filename_src_path"
    touch "$filename_src_path"

    cat > $tmpfile <<EOF
lcd $PREFIX
cd dfshop1
cd dfshop2
put $filename_src
del $filename_src
quit
EOF

    cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
    eval echo "$cmd"
    out=`eval $cmd`
    ret=$?
    rm -f "$tmpfile"
    rm -f "$filename_src_path"

    if [ $ret != 0 ] ; then
	echo "$out"
	echo "failed deleting $filename_src with error $ret"
	return 1
    fi

    echo "$out" | grep "NT_STATUS" >/dev/null 2>&1

    ret="$?"
    if [ "$ret" -eq 0 ] ; then
	echo "$out"
	echo "del $filename_src NT_STATUS_ error"
	return 1
    fi
    return 0
}

test_msdfs_deltree()
{
    tmpfile="$PREFIX/smbclient.in.$$"
    dirname_src="foodir.$$"
    filename_src="src.$$"
    filename_src_path="$PREFIX/$filename_src"
    dirname_src_path="$PREFIX/$dirname"
    rm -f "$filename_src_path"
    touch "$filename_src_path"

    cat > $tmpfile <<EOF
lcd $PREFIX
cd dfshop1
cd dfshop2
mkdir $dirname_src
cd $dirname_src
put $filename_src
cd ..
deltree $dirname_src
quit
EOF

    cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
    eval echo "$cmd"
    out=`eval $cmd`
    ret=$?
    rm -f "$tmpfile"
    rm -f "$filename_src_path"
    rm -f "$dirname_src_path"

    if [ $ret != 0 ] ; then
	echo "$out"
	echo "deltree failed deleting dir $dirname_src with error $ret"
	return 1
    fi

    echo "$out" | grep "NT_STATUS" >/dev/null 2>&1

    ret="$?"
    if [ "$ret" -eq 0 ] ; then
	echo "$out"
	echo "deltree $dirname_src NT_STATUS_ error"
	return 1
    fi
    return 0
}

# Archive bits are correctly set on file/dir creation and rename.
test_rename_archive_bit()
{
	prompt_file="attributes: A (20)"
	prompt_dir="attributes: D (10)"
	tmpfile="$PREFIX/smbclient.in.$$"
	filename="foo.$$"
	filename_ren="bar.$$"
	dirname="foodir.$$"
	dirname_ren="bardir.$$"
	filename_path="$PREFIX/$filename"
	local_name1="$LOCAL_PATH/$filename"
	local_name2="$LOCAL_PATH/$filename_ren"
	local_dir_name1="$LOCAL_PATH/$dirname"
	local_dir_name2="$LOCAL_PATH/$dirname_ren"

	rm -f $filename_path
	rm -f $local_name1
	rm -f $local_name2

	# Create a new file, ensure it has 'A' attributes.
	touch $filename_path

	cat >$tmpfile <<EOF
lcd $PREFIX
put $filename
allinfo $filename
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed creating file $filename with error $ret"
		return 1
	fi

	echo "$out" | grep "$prompt_file" >/dev/null 2>&1

	ret=$?

	rm -f $filename_path
	rm -f $local_name1
	rm -f $local_name2

	if [ $ret != 0 ]; then
		echo "$out"
		echo "Attributes incorrect on new file $ret"
		return 1
	fi

	# Now check if we remove 'A' and rename, the A comes back.
	touch $filename_path

	cat >$tmpfile <<EOF
lcd $PREFIX
put $filename
setmode $filename -a
ren $filename $filename_ren
allinfo $filename_ren
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed creating file and renaming $filename with error $ret"
		return 1
	fi

	echo "$out" | grep "$prompt_file" >/dev/null 2>&1

	ret=$?

	rm -f $filename_path
	rm -f $local_name1
	rm -f $local_name2

	if [ $ret != 0 ]; then
		echo "$out"
		echo "Attributes incorrect on renamed file $ret"
		return 1
	fi

	rm -rf $local_dir_name1
	rm -rf $local_dir_name2

	# Create a new directory, ensure it has 'D' but not 'A' attributes.

	cat >$tmpfile <<EOF
mkdir $dirname
allinfo $dirname
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed creating directory $dirname with error $ret"
		return 1
	fi

	echo "$out" | grep "$prompt_dir" >/dev/null 2>&1

	ret=$?

	rm -rf $local_dir_name1
	rm -rf $local_dir_name2

	if [ $ret != 0 ]; then
		echo "$out"
		echo "Attributes incorrect on new directory $ret"
		return 1
	fi

	# Now check if we rename, we still only have 'D' attributes

	cat >$tmpfile <<EOF
mkdir $dirname
ren $dirname $dirname_ren
allinfo $dirname_ren
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed creating directory $dirname and renaming with error $ret"
		return 1
	fi

	echo "$out" | grep "$prompt_dir" >/dev/null 2>&1

	ret=$?

	rm -f $local_name1
	rm -f $local_name2

	if [ $ret != 0 ]; then
		echo "$out"
		echo "Attributes incorrect on renamed directory $ret"
		return 1
	fi

	return 0
}

# Test authenticating using the winbind ccache
test_ccache_access()
{
	$WBINFO --ccache-save="${USERNAME}%${PASSWORD}"
	ret=$?

	if [ $ret != 0 ]; then
		echo "wbinfo failed to store creds in cache (user='${USERNAME}', pass='${PASSWORD}')"
		return 1
	fi

	$SMBCLIENT //$SERVER_IP/tmp --use-winbind-ccache -U "${USERNAME}" $ADDARGS -c quit 2>&1
	ret=$?

	if [ $ret != 0 ]; then
		echo "smbclient failed to use cached credentials"
		return 1
	fi

	$WBINFO --ccache-save="${USERNAME}%GarBage"
	ret=$?

	if [ $ret != 0 ]; then
		echo "wbinfo failed to store creds in cache (user='${USERNAME}', pass='GarBage')"
		return 1
	fi

	$SMBCLIENT //$SERVER_IP/tmp --use-winbind-ccache -U "${USERNAME}" $ADDARGS -c quit 2>&1
	ret=$?

	if [ $ret -eq 0 ]; then
		echo "smbclient succeeded with wrong cached credentials"
		return 1
	fi

	$WBINFO --logoff
}

# Test authenticating using the winbind ccache
test_auth_file()
{
	tmpfile=$PREFIX/smbclient.in.$$
	cat >$tmpfile <<EOF
username=${USERNAME}
password=${PASSWORD}
domain=${DOMAIN}
EOF
	$SMBCLIENT //$SERVER_IP/tmp --authentication-file=$tmpfile $ADDARGS -c quit 2>&1
	ret=$?
	rm $tmpfile

	if [ $ret != 0 ]; then
		echo "smbclient failed to use auth file"
		return 1
	fi

	cat >$tmpfile <<EOF
username=${USERNAME}
password=xxxx
domain=${DOMAIN}
EOF
	$SMBCLIENT //$SERVER_IP/tmp --authentication-file=$tmpfile $ADDARGS -c quit 2>&1
	ret=$?
	rm $tmpfile

	if [ $ret -eq 0 ]; then
		echo "smbclient succeeded with wrong auth file credentials"
		return 1
	fi
}

# Test doing a directory listing with backup privilege.
test_backup_privilege_list()
{
	tmpfile=$PREFIX/smbclient_backup_privilege_list

	# selftest uses the forward slash as a separator, but "net sam rights
	# grant" requires the backslash separator
	USER_TMP=$(printf '%s' "$USERNAME" | tr '/' '\\')

	# If we don't have a DOMAIN component to the username, add it.
	printf '%s' "$USER_TMP" | grep '\\' 2>&1
	ret=$?
	if [ $ret != 0 ]; then
		priv_username="$DOMAIN\\$USER_TMP"
	else
		priv_username="$USER_TMP"
	fi

	$NET sam rights grant $priv_username SeBackupPrivilege 2>&1
	ret=$?
	if [ $ret != 0 ]; then
		echo "Failed to add SeBackupPrivilege to user $priv_username - $ret"
		return 1
	fi

	cat >$tmpfile <<EOF
backup
ls
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed backup privilege list $ret"
		return 1
	fi

	# Now remove all privileges from this SID.
	$NET sam rights revoke $priv_username SeBackupPrivilege 2>&1
	ret=$?
	if [ $ret != 0 ]; then
		echo "failed to remove SeBackupPrivilege from user $priv_username - $ret"
		return 1
	fi
}

# Test accessing an share with bad names (won't convert).
test_bad_names()
{
	# First with SMB1

	if [ $PROTOCOL = "NT1" ]; then
		cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/badname-tmp -I $SERVER_IP $ADDARGS -m$PROTOCOL -c ls 2>&1'
		eval echo "$cmd"
		out=$(eval $cmd)
		ret=$?

		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed accessing badname-tmp (SMB1) with error $ret"
			return 1
		fi

		echo "$out" | wc -l 2>&1 | grep 5
		ret=$?
		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed listing \\badname-tmp - grep of number of lines (1) failed with $ret"
			return 1
		fi

		echo "$out" | grep '^  \. *D'
		ret=$?
		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed listing \\badname-tmp - grep (1) failed with $ret"
			return 1
		fi

		echo "$out" | grep '^  \.\. *D'
		ret=$?
		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed listing \\badname-tmp - grep (2) failed with $ret"
			return 1
		fi

		echo "$out" | grep '^  blank.txt *N'
		ret=$?
		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed listing \\badname-tmp - grep (3) failed with $ret"
			return 1
		fi

		echo "$out" | grep '^ *$'
		ret=$?
		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed listing \\badname-tmp - grep (4) failed with $ret"
			return 1
		fi

		echo "$out" | grep 'blocks of size.*blocks available'
		ret=$?
		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed listing \\badname-tmp - grep (5) failed with $ret"
			return 1
		fi
	fi

	if [ $PROTOCOL = "SMB3" ]; then

		# Now check again with -mSMB3
		cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/badname-tmp -I $SERVER_IP $ADDARGS -m$PROTOCOL -c ls 2>&1'
		eval echo "$cmd"
		out=$(eval $cmd)
		ret=$?

		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed accessing badname-tmp (SMB3) with error $ret"
			return 1
		fi

		echo "$out" | wc -l 2>&1 | grep 5
		ret=$?
		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed listing \\badname-tmp - SMB3 grep of number of lines (1) failed with $ret"
			return 1
		fi

		echo "$out" | grep '^  \. *D'
		ret=$?
		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed listing \\badname-tmp - SMB3 grep (1) failed with $ret"
			return 1
		fi

		echo "$out" | grep '^  \.\. *D'
		ret=$?
		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed listing \\badname-tmp - SMB3 grep (2) failed with $ret"
			return 1
		fi

		echo "$out" | grep '^  blank.txt *N'
		ret=$?
		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed listing \\badname-tmp - SMB3 grep (3) failed with $ret"
			return 1
		fi

		echo "$out" | grep '^ *$'
		ret=$?
		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed listing \\badname-tmp - SMB3 grep (4) failed with $ret"
			return 1
		fi

		echo "$out" | grep 'blocks of size.*blocks available'
		ret=$?
		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed listing \\badname-tmp - SMB3 grep (5) failed with $ret"
			return 1
		fi
	fi
}

# Test accessing an share with a name that must be mangled - with acl_xattrs.
# We know foo:bar gets mangled to FF4GBY~Q with the default name-mangling algorithm (hash2).
test_mangled_names()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	cat >$tmpfile <<EOF
ls
cd FF4GBY~Q
ls
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/manglenames_share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed accessing manglenames_share with error $ret"
		return 1
	fi

	echo "$out" | grep 'NT_STATUS'
	ret=$?
	if [ $ret = 0 ]; then
		echo "$out"
		echo "failed - NT_STATUS_XXXX listing \\manglenames_share\\FF4GBY~Q"
		return 1
	fi
}

# Test using scopy to copy a file on the server.
test_scopy()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	scopy_file=$PREFIX/scopy_file

	rm -f $scopy_file
	cat >$tmpfile <<EOF
put ${SMBCLIENT}
scopy smbclient scopy_file
lcd ${PREFIX}
get scopy_file
del smbclient
del scopy_file
quit
EOF
	if [ $PROTOCOL = "SMB3" ]; then
		# First SMB3
		cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS -m$PROTOOCL < $tmpfile 2>&1'
		eval echo "$cmd"
		out=$(eval $cmd)
		ret=$?
		out1=$(md5sum ${SMBCLIENT} | sed -e 's/ .*//')
		out2=$(md5sum ${scopy_file} | sed -e 's/ .*//')
		rm -f $tmpfile
		rm -f $scopy_file

		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed scopy test (1) with output $ret"
			return 1
		fi

		if [ $out1 != $out2 ]; then
			echo "$out1 $out2"
			echo "failed md5sum (1)"
			return 1
		fi
	fi
	#
	# Now do again using SMB1
	# to force client-side fallback.
	#

	if [ $PROTOCOL = "NT1" ]; then
		cat >$tmpfile <<EOF
put ${SMBCLIENT}
scopy smbclient scopy_file
lcd ${PREFIX}
get scopy_file
del smbclient
del scopy_file
quit
EOF
		cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS -m$PROTOCOL < $tmpfile 2>&1'
		eval echo "$cmd"
		out=$(eval $cmd)
		ret=$?
		out1=$(md5sum ${SMBCLIENT} | sed -e 's/ .*//')
		out2=$(md5sum ${scopy_file} | sed -e 's/ .*//')
		rm -f $tmpfile
		rm -f $scopy_file

		if [ $ret != 0 ]; then
			echo "$out"
			echo "failed scopy test (2) with output $ret"
			return 1
		fi

		if [ $out1 != $out2 ]; then
			echo "$out1 $out2"
			echo "failed md5sum (2)"
			return 1
		fi
	fi
}

# Test creating a stream on the root of the share directory filename - :foobar
test_toplevel_stream()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	cat >$tmpfile <<EOF
put ${PREFIX}/smbclient_interactive_prompt_commands :foobar
allinfo \\
setmode \\ -a
quit
EOF
	# Only with SMB3???
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS -mSMB3 < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed creating toplevel stream :foobar with error $ret"
		return 1
	fi

	echo "$out" | grep '^stream:.*:foobar'
	ret=$?
	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed creating toplevel stream :foobar"
		return 1
	fi
}

# Test wide links are restricted.
test_widelinks()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	cat >$tmpfile <<EOF
cd dot
ls
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/widelinks_share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed accessing widelinks_share with error $ret"
		return 1
	fi

	echo "$out" | grep 'NT_STATUS'
	ret=$?
	if [ $ret = 0 ]; then
		echo "$out"
		echo "failed - NT_STATUS_XXXX listing \\widelinks_share\\dot"
		return 1
	fi

	cat >$tmpfile <<EOF
allinfo source
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/widelinks_share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed accessing widelinks_share with error $ret"
		return 1
	fi

	# This should fail with NT_STATUS_OBJECT_NAME_NOT_FOUND
	echo "$out" | grep 'NT_STATUS_OBJECT_NAME_NOT_FOUND'
	ret=$?
	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed - should get NT_STATUS_OBJECT_NAME_NOT_FOUND listing \\widelinks_share\\source"
		return 1
	fi
}

# Test creating then deleting a stream file doesn't leave a lost-XXXXX directory.
test_streams_depot_delete()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	rm -rf "$LOCAL_PATH/lost-*"

	cat >$tmpfile <<EOF
put ${PREFIX}/smbclient_interactive_prompt_commands foo:bar
del foo
ls lost*
quit
EOF
	# This only works with SMB3?
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS -mSMB3 < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed creating then deleting foo:bar with error $ret"
		return 1
	fi

	echo "$out" | grep 'NT_STATUS_NO_SUCH_FILE listing \\lost\*'
	ret=$?
	if [ $ret != 0 ]; then
		echo "$out"
		echo "deleting foo:bar left lost-XXX directory"
		rm -rf "$LOCAL_PATH/lost-*"
		return 1
	fi
}

# Test follow symlinks can't access symlinks
test_nosymlinks()
{
	# Setup test dirs.
	local_test_dir="$LOCAL_PATH/nosymlinks/test"
	local_slink_name="$local_test_dir/source"
	local_slink_target="$local_test_dir/nosymlink_target_file"

	share_test_dir="test"
	share_foo_dir="$share_test_dir/foo"
	share_foobar_dir="$share_test_dir/foo/bar"
	share_target_file="$share_test_dir/foo/bar/testfile"

	rm -rf $local_test_dir

	local_nosymlink_target_file="nosymlink_target_file"
	echo "$local_slink_target" >$PREFIX/$local_nosymlink_target_file

	local_foobar_target_file="testfile"
	echo "$share_target_file" >$PREFIX/$local_foobar_target_file

	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	cat >$tmpfile <<EOF
mkdir $share_test_dir
mkdir $share_foo_dir
mkdir $share_foobar_dir
lcd $PREFIX
cd /$share_test_dir
put $local_nosymlink_target_file
cd /$share_foobar_dir
put $local_foobar_target_file
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/nosymlinks -I $SERVER_IP $LOCAL_ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile
	rm -f $PREFIX/$local_nosymlink_target_file
	rm -f $PREFIX/$local_foobar_target_file

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed accessing local_symlinks with error $ret"
		false
		return
	fi

	echo "$out" | grep 'NT_STATUS_'
	ret=$?
	if [ $ret -eq 0 ]; then
		echo "$out"
		echo "failed - got an NT_STATUS error"
		false
		return
	fi

	# Create the symlink locally
	ln -s $local_slink_target $local_slink_name

	# Getting a file through a symlink name should fail.
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	cat >$tmpfile <<EOF
get test\\source
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/nosymlinks -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed accessing nosymlinks with error $ret"
		return 1
	fi

	echo "$out" | grep 'NT_STATUS_OBJECT_NAME_NOT_FOUND'
	ret=$?
	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed - should get NT_STATUS_OBJECT_NAME_NOT_FOUND getting \\nosymlinks\\source"
		return 1
	fi

	# But we should be able to create and delete directories.
	cat >$tmpfile <<EOF
mkdir test\\a
mkdir test\\a\\b
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/nosymlinks -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed accessing nosymlinks with error $ret"
		return 1
	fi

	echo "$out" | grep 'NT_STATUS'
	ret=$?
	if [ $ret -eq 0 ]; then
		echo "$out"
		echo "failed - NT_STATUS_XXXX doing mkdir a; mkdir a\\b on \\nosymlinks"
		return 1
	fi

	# Ensure regular file/directory access also works.
	cat >$tmpfile <<EOF
cd test\\foo\\bar
ls
get testfile -
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/nosymlinks -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed accessing nosymlinks with error $ret"
		return 1
	fi

	echo "$out" | grep 'NT_STATUS'
	ret=$?
	if [ $ret -eq 0 ]; then
		echo "$out"
		echo "failed - NT_STATUS_XXXX doing cd foo\\bar; get testfile on \\nosymlinks"
		return 1
	fi

	# CLEANUP
	rm -f $local_slink_name

	cat >$tmpfile <<EOF
deltree test
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/nosymlinks -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed accessing nosymlinks with error $ret"
		return 1
	fi

	echo "$out" | grep 'NT_STATUS'
	ret=$?
	if [ $ret -eq 0 ]; then
		echo "$out"
		echo "failed - NT_STATUS_XXXX doing cd foo\\bar; get testfile on \\nosymlinks"
		return 1
	fi
}

# Test we can follow normal symlinks.
# Bug: https://bugzilla.samba.org/show_bug.cgi?id=12860
# Note - this needs to be tested over SMB3, not SMB1.

test_local_symlinks()
{
	# Setup test dirs.
	LOCAL_RAWARGS="${CONFIGURATION} -mSMB3"
	LOCAL_ADDARGS="${LOCAL_RAWARGS} $*"

	share_test_dir="test"
	share_slink_target_dir="$share_test_dir/dir1"

	local_test_dir="$LOCAL_PATH/local_symlinks/$share_test_dir"
	local_slink_name="$local_test_dir/sym_name"
	local_slink_target_dir="$local_test_dir/dir1"

	rm -rf $local_test_dir

	# Create the initial directories
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	cat >$tmpfile <<EOF
mkdir $share_test_dir
mkdir $share_slink_target_dir
quit
EOF

	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/local_symlinks -I $SERVER_IP $LOCAL_ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed accessing local_symlinks with error $ret"
		false
		return
	fi

	echo "$out" | grep 'NT_STATUS_'
	ret=$?
	if [ $ret -eq 0 ]; then
		echo "$out"
		echo "failed - got an NT_STATUS error"
		false
		return
	fi

	# Create the symlink locally
	ln -s $local_slink_target_dir $local_slink_name
	ret=$?
	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed - unable to create symlink"
		ls -la $local_test_dir
		false
		return
	fi

	# Can we cd into the symlink name and ls ?
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	cat >$tmpfile <<EOF
cd $share_test_dir\\sym_name
ls
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/local_symlinks -I $SERVER_IP $LOCAL_ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed accessing local_symlinks with error $ret"
		false
		return
	fi

	echo "$out" | grep 'NT_STATUS_'
	ret=$?
	if [ $ret -eq 0 ]; then
		echo "$out"
		echo "failed - got an NT_STATUS error"
		false
		return
	fi

	# CLEANUP
	rm -f $local_slink_name

	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	cat >$tmpfile <<EOF
deltree $share_test_dir
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/local_symlinks -I $SERVER_IP $LOCAL_ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed accessing local_symlinks with error $ret"
		false
		return
	fi

	echo "$out" | grep 'NT_STATUS_'
	ret=$?
	if [ $ret -eq 0 ]; then
		echo "$out"
		echo "failed - got an NT_STATUS error"
		false
		return
	fi
}

#
# Regression test for CVE-2019-10197
# we should always get ACCESS_DENIED
#
test_noperm_share_regression()
{
	cmd='$SMBCLIENT -U$USERNAME%$PASSWORD //$SERVER/noperm -I $SERVER_IP $LOCAL_ADDARGS -c "ls;ls"  2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	if [ $ret -eq 0 ]; then
		echo "$out"
		echo "failed accessing no perm share should not work"
		return 1
	fi

	num=$(echo "$out" | grep 'NT_STATUS_ACCESS_DENIED' | wc -l)
	if [ "$num" -ne "2" ]; then
		echo "$out"
		echo "failed num[$num] - two NT_STATUS_ACCESS_DENIED lines expected"
		return 1
	fi

	return 0
}

# Test smbclient deltree command
test_deltree()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	deltree_dir=$PREFIX/deltree_dir

	rm -rf $deltree_dir
	cat >$tmpfile <<EOF
mkdir deltree_dir
mkdir deltree_dir/foo
mkdir deltree_dir/foo/bar
put ${SMBCLIENT} deltree_dir/foo/bar/client
deltree deltree_dir
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed deltree test with output $ret"
		false
		return
	fi

	echo "$out" | grep 'NT_STATUS_'
	ret=$?
	if [ $ret -eq 0 ]; then
		echo "$out"
		echo "failed - got an NT_STATUS error"
		false
		return
	fi

	if [ -d $deltree_dir ]; then
		echo "deltree did not delete everything"
		false
		return
	fi
}

# Test smbclient setmode command
test_setmode()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands

	cat >$tmpfile <<EOF
del test_setmode
put ${SMBCLIENT} test_setmode
setmode test_setmode +r +s +h +a
allinfo test_setmode
setmode test_setmode -rsha
allinfo test_setmode
del test_setmode
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed setmode test with output $ret"
		false
		return
	fi

	echo "$out" | grep 'attributes: RHSA'
	ret=$?
	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed - should get attributes: RHSA"
		false
		return
	fi

	echo "$out" | grep 'attributes:  (80)'
	ret=$?
	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed - should also get attributes:  (80)"
		false
		return
	fi
}

# Test smbclient utimes command
test_utimes()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands

	saved_TZ="$TZ"
	TZ=UTC
	export TZ
	saved_LANG="$LANG"
	LANG=C
	export LANG

	cat >$tmpfile <<EOF
del utimes_test
put ${SMBCLIENT} utimes_test
allinfo utimes_test
utimes utimes_test 2016:02:04-06:19:20 17:01:01-05:10:20 -1 -1
allinfo utimes_test
del utimes_test
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?

	if [ -n "$saved_TZ" ]; then
		export TZ="$saved_TZ"
	else
		unset TZ
	fi
	if [ -n "$saved_LANG" ]; then
		export LANG="$saved_LANG"
	else
		unset LANG
	fi

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed utimes test with output $ret"
		false
		return
	fi

	# Now, we should have 2 identical write_time and change_time
	# values, but one access_time of Jan  1 05:10:20 AM,
	# and one create_time of Feb 04 06:19:20 AM 2016
	out_sorted=$(echo "$out" | sort | uniq)
	num_create=$(echo "$out_sorted" | grep -c 'create_time:')
	num_access=$(echo "$out_sorted" | grep -c 'access_time:')
	num_write=$(echo "$out_sorted" | grep -c 'write_time:')
	num_change=$(echo "$out_sorted" | grep -c 'change_time:')
	if [ "$num_create" != "2" ]; then
		echo "failed - should get two create_time $out"
		false
		return
	fi
	if [ "$num_access" != "2" ]; then
		echo "failed - should get two access_time $out"
		false
		return
	fi
	if [ "$num_write" != "1" ]; then
		echo "failed - should only get one write_time $out"
		false
		return
	fi
	if [ "$num_change" != "1" ]; then
		echo "failed - should only get one change_time $out"
		false
		return
	fi

	# This could be: Sun Jan  1 05:10:20 AM 2017
	# or           : Sun Jan  1 05:10:20 2017 CET
	echo "$out" | grep 'access_time:.*Sun Jan.*1 05:10:20 .*2017.*'
	ret=$?
	if [ $ret -ne 0 ]; then
		echo "$out"
		echo
		echo "failed - should get access_time:    Sun Jan  1 05:10:20 [AM] 2017"
		false
		return
	fi

	# This could be: Thu Feb  4 06:19:20 AM 2016
	# or           : Thu Feb  4 06:19:20 2016 CET
	echo "$out" | grep 'create_time:.*Thu Feb.*4 06:19:20 .*2016.*'
	ret=$?
	if [ $ret -ne 0 ]; then
		echo "$out"
		echo
		echo "failed - should get access_time:    Thu Feb  4 06:19:20 [AM] 2016"
		false
		return
	fi
}

# Test smbclient renames with pathnames containing '..'
test_rename_dotdot()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands

	cat >$tmpfile <<EOF
deltree dotdot_test
mkdir dotdot_test
cd dotdot_test
mkdir dir1
mkdir dir2
cd dir1
put ${SMBCLIENT} README
rename README ..\\dir2\\README
cd ..
cd dir2
allinfo README
cd \\
deltree dotdot_test
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed rename_dotdot test with output $ret"
		false
		return
	fi

	# We are allowed to get NT_STATUS_NO_SUCH_FILE listing \dotdot_test
	# as the top level directory should not exist, but no other errors.

	error_str=$(echo $out | grep NT_STATUS | grep -v "NT_STATUS_NO_SUCH_FILE listing .dotdot_test")
	if [ "$error_str" != "" ]; then
		echo "failed - unexpected NT_STATUS error in $out"
		false
		return
	fi
}

# Test doing a volume command.
test_volume()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	cat >$tmpfile <<EOF
volume
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed doing volume command with error $ret"
		return 1
	fi

	echo "$out" | grep '^Volume: |tmp| serial number'
	ret=$?
	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed doing volume command"
		return 1
	fi
}

test_server_os_message()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	cat >$tmpfile <<EOF
ls
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed to connect error $ret"
		return 1
	fi

	echo "$out" | grep 'Try "help" to get a list of possible commands.'
	ret=$?
	if [ $ret -ne 0 ]; then
		echo "$out"
		echo 'failed - should get: Try "help" to get a list of possible commands.'
		return 1
	fi

	return 0
}

test_server_quiet_message()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	cat >$tmpfile <<EOF
ls
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS --quiet < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "failed to connect error $ret"
		return 1
	fi

	echo "$out" | grep 'Try "help" to get a list of possible commands.'
	ret=$?
	if [ $ret -eq 0 ]; then
		echo "$out"
		echo 'failed - quiet should skip this message.'
		return 1
	fi

	return 0
}

# Test xattr_stream correctly reports mode.
# BUG: https://bugzilla.samba.org/show_bug.cgi?id=13380

test_stream_directory_xattr()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	#
	# Test against streams_xattr
	#
	cat >$tmpfile <<EOF
deltree foo
mkdir foo
put ${PREFIX}/smbclient_interactive_prompt_commands foo:bar
setmode foo -a
allinfo foo:bar
deltree foo
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/streams_xattr -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed checking attributes on xattr stream foo:bar with error $ret"
		return 1
	fi

	echo "$out" | grep "attributes:.*80"
	ret=$?
	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed checking attributes on xattr stream foo:bar"
		return 1
	fi

	#
	# Test against streams_depot
	#
	cat >$tmpfile <<EOF
deltree foo
mkdir foo
put ${PREFIX}/smbclient_interactive_prompt_commands foo:bar
setmode foo -a
allinfo foo:bar
deltree foo
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed checking attributes on depot stream foo:bar with error $ret"
		return 1
	fi

	echo "$out" | grep "attributes:.*80"
	ret=$?
	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed checking attributes on depot stream foo:bar"
		return 1
	fi
}

# Test smbclient non-empty rmdir command
test_del_nedir()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	del_nedir="$LOCAL_PATH/del_nedir"

	rm -rf $del_nedir
	mkdir $del_nedir
	touch $del_nedir/afile
	cat >$tmpfile <<EOF
rmdir del_nedir
quit
EOF
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -rf $del_nedir

	if [ $ret != 0 ]; then
		echo "$out"
		echo "failed test_del_nedir test with output $ret"
		false
		return
	fi

	# Should get NT_STATUS_DIRECTORY_NOT_EMPTY error from rmdir
	echo "$out" | grep 'NT_STATUS_DIRECTORY_NOT_EMPTY'
	ret=$?
	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "test_del_nedir failed - should get an NT_STATUS_DIRECTORY_NOT_EMPTY error"
		false
		return
	fi
}

test_valid_users()
{
	tmpfile=$PREFIX/smbclient_interactive_prompt_commands
	cat >$tmpfile <<EOF
ls
quit
EOF
	# User in "valid users" can login to service
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_users $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "test_valid_users:valid_users 'User in 'valid users' can login to service' failed - $ret"
		return 1
	fi

	# User from ad group in "valid users" can login to service
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_users_group $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "test_valid_users:valid_users_group 'User from ad group in 'valid users' can login to service' failed - $ret"
		return 1
	fi

	# User from UNIX group in "valid users" can login to service
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_users_unix_group $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "test_valid_users:valid_users_unix_group 'User from UNIX group in 'valid users' can login to service' failed - $ret"
		return 1
	fi

	# User not in NIS group in "valid users" can't login to service
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_users_nis_group $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	echo "$out" | grep 'NT_STATUS_ACCESS_DENIED'
	ret=$?

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "test_valid_users:valid_users_nis_group 'User not in NIS group in 'valid users' can't login to service' failed - $ret"
		return 1
	fi

	# Check user in UNIX, then in NIS group in "valid users" can login to service
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_users_unix_nis_group $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "test_valid_users:valid_users_unix_nis_group 'Check user in UNIX, then in NIS group in 'valid users' can login to service' failed - $ret"
		return 1
	fi

	# Check user in NIS, then in UNIX group in "valid users" can login to service
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_users_nis_unix_group $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "test_valid_users:valid_users_nis_unix_group 'Check user in NIS, then in UNIX group in 'valid users' can login to service' failed - $ret"
		return 1
	fi

	# User not in "invalid users" can login to service
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -Ualice%Secret007 //$SERVER/invalid_users $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "test_valid_users:invalid_users 'User not in 'invalid users' can login to service' failed - $ret"
		return 1
	fi

	# User in "invalid users" can't login to service
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/invalid_users $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	echo "$out" | grep 'NT_STATUS_ACCESS_DENIED'
	ret=$?

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "test_valid_users:invalid_users 'User in 'invalid users' can't login to service' failed - $ret"
		return 1
	fi

	# User is in "valid and invalid users" can't login to service
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_and_invalid_users $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	echo "$out" | grep 'NT_STATUS_ACCESS_DENIED'
	ret=$?

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "test_valid_users:valid_and_invalid_users 'User is in 'valid and invalid users' can't login to service' failed - $ret"
		return 1
	fi

	# 2 Users are in "valid users"
	cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -Ualice%Secret007 //$SERVER/valid_and_invalid_users $ADDARGS < $tmpfile 2>&1'
	eval echo "$cmd"
	out=$(eval $cmd)
	ret=$?
	rm -f $tmpfile

	if [ $ret -ne 0 ]; then
		echo "$out"
		echo "test_valid_users:valid_and_invalid_users '2 Users are in 'valid users'' failed - $ret"
		return 1
	fi

	return 0
}

test_smbclient_minus_e_stderr()
{
	cmd='$SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -c ls'
	eval echo "$cmd"
	out=$(eval $cmd)
	if [ $? != 0 ]; then
		echo "$out"
		echo "command failed"
		return 1
	fi

	# test smbclient 'ls' command output went to stdout
	echo "$out" | grep "blocks available" >/dev/null 2>&1
	if [ $? != 0 ]; then
		# didn't get output to stdout
		echo "expected output was NOT output to stdout"
		return 1
	fi

	# this time execute ls but redirect stdout alone to /dev/null
	cmd='$SMBCLIENT -E "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -c "ls"  2>&1 > /dev/null'
	eval echo "$cmd"
	out=$(eval $cmd)
	if [ $? != 0 ]; then
		echo "$out"
		echo "command failed"
		return 1
	fi

	# test smbclient 'ls' command output went to stderr
	echo "$out" | grep "blocks available" >/dev/null 2>&1
	if [ $? != 0 ]; then
		# didn't get output to stderr
		echo "expected output was NOT output to stderr"
		return 1
	fi

	return 0

}

#
#
LOGDIR_PREFIX=test_smbclient_s3

# possibly remove old logdirs:

for OLDDIR in $(find ${PREFIX} -type d -name "${LOGDIR_PREFIX}_*"); do
	echo "removing old directory ${OLDDIR}"
	rm -rf ${OLDDIR}
done

LOGDIR=$(mktemp -d ${PREFIX}/${LOGDIR_PREFIX}_XXXXXX)

testit "smbclient -L $SERVER_IP" $SMBCLIENT -L $SERVER_IP -N -p 139 ${RAWARGS} || failed=$(expr $failed + 1)
testit "smbclient -L $SERVER -I $SERVER_IP" $SMBCLIENT -L $SERVER -I $SERVER_IP -N -p 139 ${RAWARGS} -c quit || failed=$(expr $failed + 1)

testit "noninteractive smbclient does not prompt" \
	test_noninteractive_no_prompt ||
	failed=$(expr $failed + 1)

testit "noninteractive smbclient -l does not prompt" \
	test_noninteractive_no_prompt -l $LOGDIR ||
	failed=$(expr $failed + 1)

testit "smbclient output goes to stderr when -E is passed" \
	test_smbclient_minus_e_stderr ||
	failed=$(expr $failed + 1)

testit "interactive smbclient prompts on stdout" \
	test_interactive_prompt_stdout ||
	failed=$(expr $failed + 1)

testit "interactive smbclient -l prompts on stdout" \
	test_interactive_prompt_stdout -l $LOGDIR ||
	failed=$(expr $failed + 1)

testit "creating a bad symlink and deleting it" \
	test_bad_symlink ||
	failed=$(expr $failed + 1)

testit "creating a good symlink and deleting it by path" \
	test_good_symlink ||
	failed=$(expr $failed + 1)

testit "writing into a read-only directory fails" \
	test_read_only_dir ro-tmp ||
	failed=$(expr $failed + 1)

testit "writing into a read-only share fails" \
	test_read_only_dir valid-users-tmp ||
	failed=$(expr $failed + 1)

testit "Reading a owner-only file fails" \
	test_owner_only_file ||
	failed=$(expr $failed + 1)

testit "Accessing an MS-DFS link" \
	test_msdfs_link ||
	failed=$(expr $failed + 1)

testit "Recursive ls across MS-DFS links" \
	test_msdfs_recursive_dir ||
	failed=$(expr $failed + 1)

testit "Rename on MS-DFS share" \
	test_msdfs_rename ||
	failed=$(expr $failed + 1)

testit "Hardlink on MS-DFS share" \
	test_msdfs_hardlink ||
	failed=$(expr $failed + 1)

testit "del on MS-DFS share" \
    test_msdfs_del || \
    failed=`expr $failed + 1`

testit "deltree on MS-DFS share" \
    test_msdfs_deltree || \
    failed=`expr $failed + 1`

testit "Ensure archive bit is set correctly on file/dir rename" \
	test_rename_archive_bit ||
	failed=$(expr $failed + 1)

testit "ccache access works for smbclient" \
	test_ccache_access ||
	failed=$(expr $failed + 1)

testit "sending a message to the remote server" \
	test_message ||
	failed=$(expr $failed + 1)

testit "using an authentication file" \
	test_auth_file ||
	failed=$(expr $failed + 1)

testit "list with backup privilege" \
	test_backup_privilege_list ||
	failed=$(expr $failed + 1)

testit "list a share with bad names (won't convert)" \
	test_bad_names ||
	failed=$(expr $failed + 1)

testit "list a share with a mangled name + acl_xattr object" \
	test_mangled_names ||
	failed=$(expr $failed + 1)

testit "server-side file copy" \
	test_scopy ||
	failed=$(expr $failed + 1)

testit "creating a :stream at root of share" \
	test_toplevel_stream ||
	failed=$(expr $failed + 1)

testit "Ensure widelinks are restricted" \
	test_widelinks ||
	failed=$(expr $failed + 1)

testit "streams_depot can delete correctly" \
	test_streams_depot_delete ||
	failed=$(expr $failed + 1)

testit "stream_xattr attributes" \
	test_stream_directory_xattr ||
	failed=$(expr $failed + 1)

testit "follow symlinks = no" \
	test_nosymlinks ||
	failed=$(expr $failed + 1)

testit "follow local symlinks" \
	test_local_symlinks ||
	failed=$(expr $failed + 1)

testit "noperm share regression" \
	test_noperm_share_regression ||
	failed=$(expr $failed + 1)

testit "smbclient deltree command" \
	test_deltree ||
	failed=$(expr $failed + 1)

testit "server os message" \
	test_server_os_message ||
	failed=$(expr $failed + 1)

testit "test server quiet message" \
	test_server_quiet_message ||
	failed=$(expr $failed + 1)

testit "setmode test" \
	test_setmode ||
	failed=$(expr $failed + 1)

testit "utimes" \
	test_utimes ||
	failed=$(expr $failed + 1)

testit "rename_dotdot" \
	test_rename_dotdot ||
	failed=$(expr $failed + 1)

testit "volume" \
	test_volume ||
	failed=$(expr $failed + 1)

testit "rm -rf $LOGDIR" \
	rm -rf $LOGDIR ||
	failed=$(expr $failed + 1)

testit "delete a non empty directory" \
	test_del_nedir ||
	failed=$(expr $failed + 1)

testit "valid users" \
	test_valid_users ||
	failed=$(expr $failed + 1)

testok $0 $failed