sin/samba-mirror
1
0
Fork 0
mirror of https://github.com/samba-team/samba.git synced 2025-01-15 23:24:37 +03:00
Code
samba-mirror/source/Makefile.in
Andrew Bartlett b04561d3fd This removes --with-ssl from Samba. 
This option was badly maintained, useless and confused our users and
distirbutors.  (its SSL, therfore it must be good...)

No windows client uses this protocol without help from an SSL tunnel.

I can't see any reason why setting up a unix-side SSL wrapper would
be any more difficult than the > 10 config options this mess added
to samba in any case.

On the Samba client end, I think the LIBSMB_PROG hack should be
sufficient to start stunnel on the unix side.  We might extend this
to take %i and %p (IP and port) if there is demand.

Andrew Bartlett
-

942 lines
33 KiB
Makefile
Raw Blame History

##########################################################################
# Makefile.in for Samba - rewritten for autoconf support
# Copyright Andrew Tridgell 1992-1998
# Copyright (C) 2001 by Martin Pool <mbp@samba.org>
###########################################################################
prefix=@prefix@
exec_prefix=@exec_prefix@
mandir=@mandir@
LIBS=@LIBS@
CC=@CC@
SHLD=@SHLD@
CFLAGS=@CFLAGS@
CPPFLAGS=@CPPFLAGS@
LDFLAGS=@LDFLAGS@
LDSHFLAGS=@LDSHFLAGS@ @LDFLAGS@ @CFLAGS@
AWK=@AWK@
DYNEXP=@DYNEXP@
TERMLDFLAGS=@TERMLDFLAGS@
TERMLIBS=@TERMLIBS@
LINK=$(CC) $(FLAGS) $(LDFLAGS)
INSTALLCMD=@INSTALL@
VPATH=@srcdir@
srcdir=@srcdir@
builddir=@builddir@
SHELL=/bin/sh
# XXX: Perhaps this should be @SHELL@ instead -- apparently autoconf
# will search for a POSIX-compliant shell, and that might not be
# /bin/sh on some platforms. I guess it's not a big problem -- mbp
# See the autoconf manual "Installation Directory Variables" for a
# discussion of thesubtle use of these variables.
BASEDIR= @prefix@
BINDIR = @bindir@
# sbindir is mapped to bindir when compiling SAMBA in 2.0.x compatibility mode.
SBINDIR = @sbindir@
LIBDIR = @libdir@
VARDIR = @localstatedir@
MANDIR = @mandir@
# The permissions to give the executables
INSTALLPERMS = 0755
# set these to where to find various files
# These can be overridden by command line switches (see smbd(8))
# or in smb.conf (see smb.conf(5))
LOGFILEBASE = $(VARDIR)
CONFIGFILE = $(LIBDIR)/smb.conf
LMHOSTSFILE = $(LIBDIR)/lmhosts
DRIVERFILE = $(LIBDIR)/printers.def
# This is where smbpasswd et al go
PRIVATEDIR = @privatedir@
SMB_PASSWD_FILE = $(PRIVATEDIR)/smbpasswd
PRIVATE_DIR = $(PRIVATEDIR)
# This is where SWAT images and help files go
SWATDIR = @swatdir@
# the directory where lock files go
LOCKDIR = @lockdir@
# the directorty where pid files go
PIDDIR = @piddir@
# man pages language(s)
man_langs = "@manlangs@"
FLAGS1 = $(CFLAGS) @FLAGS1@ -Iinclude -I$(srcdir)/include -I$(srcdir)/ubiqx -I$(srcdir)/smbwrapper -I. $(CPPFLAGS) -I$(srcdir)
FLAGS2 =
FLAGS3 =
FLAGS4 =
FLAGS5 = $(FLAGS1) $(FLAGS2) $(FLAGS3) $(FLAGS4)
FLAGS = $(ISA) $(FLAGS5)
FLAGS32 = $(ISA32) $(FLAGS5)
PASSWD_FLAGS = -DSMB_PASSWD_FILE=\"$(SMB_PASSWD_FILE)\" -DPRIVATE_DIR=\"$(PRIVATE_DIR)\"
PATH_FLAGS1 = -DCONFIGFILE=\"$(CONFIGFILE)\" -DSBINDIR=\"$(SBINDIR)\"
PATH_FLAGS2 = $(PATH_FLAGS1) -DBINDIR=\"$(BINDIR)\" -DDRIVERFILE=\"$(DRIVERFILE)\"
PATH_FLAGS3 = $(PATH_FLAGS2) -DLMHOSTSFILE=\"$(LMHOSTSFILE)\"
PATH_FLAGS4 = $(PATH_FLAGS3) -DSWATDIR=\"$(SWATDIR)\" -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\"
PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" -DLOGFILEBASE=\"$(LOGFILEBASE)\"
PATH_FLAGS = $(PATH_FLAGS5) $(PASSWD_FLAGS)
WINBIND_PROGS = @WINBIND_TARGETS@
WINBIND_SPROGS = @WINBIND_STARGETS@
WINBIND_PAM_PROGS = @WINBIND_PAM_TARGETS@
WINBIND_LPROGS = @WINBIND_LTARGETS@
SPROGS = bin/smbd bin/nmbd bin/swat bin/wrepld @WINBIND_STARGETS@
PROGS1 = bin/smbclient bin/net bin/smbspool bin/testparm bin/testprns bin/smbstatus bin/smbcontrol bin/smbtree bin/tdbbackup @RUNPROG@ @WINBIND_TARGETS@
PROGS2 = bin/smbpasswd bin/rpcclient bin/smbcacls @WRAP@ @WRAP32@ @PAM_MOD@
MPROGS = @MPROGS@
LPROGS = $(WINBIND_PAM_PROGS) $(WINBIND_LPROGS)
PROGS = $(PROGS1) $(PROGS2) $(MPROGS) bin/nmblookup bin/pdbedit bin/smbgroupedit
TORTURE_PROGS = bin/smbtorture bin/msgtest bin/masktest bin/locktest \
bin/locktest2 bin/nsstest
#SHLIBS = libsmbclient
SHLIBS =
SCRIPTS = $(srcdir)/script/smbtar $(srcdir)/script/addtosmbpass $(srcdir)/script/convert_smbpasswd \
$(srcdir)/script/findsmb
QUOTAOBJS=@QUOTAOBJS@
######################################################################
# object file lists
######################################################################
TDBBASE_OBJ = tdb/tdb.o tdb/spinlock.o
TDB_OBJ = $(TDBBASE_OBJ) tdb/tdbutil.o
LIB_OBJ = lib/charcnv.o lib/debug.o lib/fault.o \
lib/getsmbpass.o lib/interface.o lib/md4.o \
lib/interfaces.o lib/pidfile.o lib/replace.o \
lib/signal.o lib/system.o lib/time.o \
lib/ufc.o lib/genrand.o lib/username.o \
lib/util_getent.o lib/util_pw.o lib/access.o lib/smbrun.o \
lib/bitmap.o lib/crc32.o lib/snprintf.o lib/dprintf.o \
lib/xfile.o lib/wins_srv.o \
lib/util_str.o lib/util_sid.o \
lib/util_unistr.o lib/util_file.o \
lib/util.o lib/util_sock.o lib/util_sec.o \
lib/talloc.o lib/hash.o lib/substitute.o lib/fsusage.o \
lib/ms_fnmatch.o lib/select.o lib/error.o lib/messages.o \
lib/tallocmsg.o lib/dmallocmsg.o \
lib/md5.o lib/hmacmd5.o lib/iconv.o lib/smbpasswd.o \
nsswitch/wb_client.o nsswitch/wb_common.o \
lib/pam_errors.o intl/lang_tdb.o lib/account_pol.o \
$(TDB_OBJ)
READLINE_OBJ = lib/readline.o
UBIQX_OBJ = ubiqx/ubi_BinTree.o ubiqx/ubi_Cache.o ubiqx/ubi_SplayTree.o \
ubiqx/ubi_dLinkList.o ubiqx/ubi_sLinkList.o ubiqx/debugparse.o
PARAM_OBJ = param/loadparm.o param/params.o dynconfig.o
LIBADS_OBJ = libads/ldap.o libads/ldap_printer.o libads/sasl.o \
libads/krb5_setpw.o libads/kerberos.o libads/ldap_user.o \
libads/ads_struct.o libads/ads_status.o passdb/secrets.o \
libads/util.o libads/disp_sec.o
LIBSMB_OBJ = libsmb/clientgen.o libsmb/cliconnect.o libsmb/clifile.o \
libsmb/clikrb5.o libsmb/clispnego.o libsmb/asn1.o \
libsmb/clirap.o libsmb/clierror.o libsmb/climessage.o \
libsmb/clireadwrite.o libsmb/clilist.o libsmb/cliprint.o \
libsmb/clitrans.o libsmb/clisecdesc.o libsmb/clidgram.o \
libsmb/namequery.o libsmb/nmblib.o libsmb/clistr.o \
libsmb/nterr.o libsmb/smbdes.o libsmb/smbencrypt.o \
libsmb/smberr.o libsmb/credentials.o libsmb/pwd_cache.o \
libsmb/clioplock.o libsmb/errormap.o libsmb/clirap2.o \
libsmb/passchange.o libsmb/unexpected.o libsmb/doserr.o \
$(RPC_PARSE_OBJ1) $(LIBADS_OBJ)
LIBMSRPC_OBJ = libsmb/cli_lsarpc.o libsmb/cli_samr.o libsmb/cli_spoolss.o \
libsmb/cli_netlogon.o libsmb/cli_srvsvc.o libsmb/cli_wkssvc.o \
libsmb/cli_dfs.o libsmb/cli_reg.o libsmb/trust_passwd.o\
rpc_client/cli_pipe.o libsmb/cli_pipe_util.o
LIBMSRPC_PICOBJ = $(LIBMSRPC_OBJ:.o=.po)
RPC_SERVER_OBJ = rpc_server/srv_lsa.o rpc_server/srv_lsa_nt.o \
rpc_server/srv_lsa_hnd.o rpc_server/srv_netlog.o rpc_server/srv_netlog_nt.o \
rpc_server/srv_pipe_hnd.o rpc_server/srv_reg.o rpc_server/srv_reg_nt.o \
rpc_server/srv_samr.o rpc_server/srv_samr_nt.o rpc_server/srv_srvsvc.o rpc_server/srv_srvsvc_nt.o \
rpc_server/srv_util.o rpc_server/srv_wkssvc.o rpc_server/srv_wkssvc_nt.o \
rpc_server/srv_pipe.o rpc_server/srv_dfs.o rpc_server/srv_dfs_nt.o \
rpc_server/srv_spoolss.o rpc_server/srv_spoolss_nt.o
# this includes only the low level parse code, not stuff
# that requires knowledge of security contexts
RPC_PARSE_OBJ1 = rpc_parse/parse_prs.o rpc_parse/parse_sec.o \
rpc_parse/parse_misc.o
RPC_PARSE_OBJ = rpc_parse/parse_lsa.o rpc_parse/parse_net.o \
rpc_parse/parse_reg.o rpc_parse/parse_rpc.o \
rpc_parse/parse_samr.o rpc_parse/parse_srv.o \
rpc_parse/parse_wks.o \
rpc_parse/parse_spoolss.o rpc_parse/parse_dfs.o
RPC_CLIENT_OBJ = rpc_client/cli_netlogon.o rpc_client/cli_pipe.o \
rpc_client/cli_login.o \
rpc_client/cli_spoolss_notify.o
LOCKING_OBJ = locking/locking.o locking/brlock.o locking/posix.o
PASSDB_OBJ = passdb/passdb.o passdb/pdb_interface.o passdb/pdb_get_set.o \
passdb/machine_sid.o passdb/pdb_smbpasswd.o \
passdb/pdb_tdb.o passdb/pdb_ldap.o passdb/pdb_plugin.o \
passdb/pdb_nisplus.o
GROUPDB_OBJ = groupdb/mapping.o
# passdb/smbpass.o passdb/ldap.o passdb/nispass.o
PROFILE_OBJ = profile/profile.o
OPLOCK_OBJ = smbd/oplock.o smbd/oplock_irix.o smbd/oplock_linux.o
NOTIFY_OBJ = smbd/notify.o smbd/notify_hash.o smbd/notify_kernel.o
PLAINTEXT_AUTH_OBJ = auth/pampass.o auth/pass_check.o
UNIGRP_OBJ = libsmb/netlogon_unigrp.o
AUTH_OBJ = auth/auth.o auth/auth_sam.o auth/auth_server.o auth/auth_domain.o \
auth/auth_rhosts.o auth/auth_unix.o auth/auth_util.o auth/auth_winbind.o \
auth/auth_builtin.o auth/auth_compat.o $(PLAINTEXT_AUTH_OBJ) $(UNIGRP_OBJ)
MANGLE_OBJ = smbd/mangle.o smbd/mangle_hash.o smbd/mangle_map.o smbd/mangle_hash2.o
SMBD_OBJ1 = smbd/server.o smbd/files.o smbd/chgpasswd.o smbd/connection.o \
smbd/utmp.o smbd/session.o \
smbd/dfree.o smbd/dir.o smbd/password.o smbd/conn.o smbd/fileio.o \
smbd/ipc.o smbd/lanman.o smbd/negprot.o \
smbd/message.o smbd/nttrans.o smbd/pipes.o \
smbd/reply.o smbd/sesssetup.o smbd/trans2.o smbd/uid.o \
smbd/dosmode.o smbd/filename.o smbd/open.o smbd/close.o \
smbd/blocking.o smbd/sec_ctx.o \
smbd/vfs.o smbd/vfs-wrap.o smbd/statcache.o \
smbd/posix_acls.o lib/sysacls.o \
smbd/process.o smbd/service.o smbd/error.o \
printing/printfsp.o lib/util_seaccess.o smbd/srvstr.o \
smbd/build_options.o \
smbd/change_trust_pw.o \
rpc_client/cli_spoolss_notify.o \
$(MANGLE_OBJ)
PRINTING_OBJ = printing/pcap.o printing/print_svid.o \
printing/print_cups.o printing/print_generic.o \
printing/lpq_parse.o printing/load.o
PRINTBACKEND_OBJ = printing/printing.o printing/nt_printing.o
MSDFS_OBJ = msdfs/msdfs.o
SMBD_OBJ = $(SMBD_OBJ1) $(MSDFS_OBJ) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
$(RPC_SERVER_OBJ) $(RPC_PARSE_OBJ) \
$(LOCKING_OBJ) $(PASSDB_OBJ) $(PRINTING_OBJ) $(PROFILE_OBJ) \
$(LIB_OBJ) $(PRINTBACKEND_OBJ) $(QUOTAOBJS) $(OPLOCK_OBJ) \
$(NOTIFY_OBJ) $(GROUPDB_OBJ) $(AUTH_OBJ) $(LIBMSRPC_OBJ)
NMBD_OBJ1 = nmbd/asyncdns.o nmbd/nmbd.o nmbd/nmbd_become_dmb.o \
nmbd/nmbd_become_lmb.o nmbd/nmbd_browserdb.o \
nmbd/nmbd_browsesync.o nmbd/nmbd_elections.o \
nmbd/nmbd_incomingdgrams.o nmbd/nmbd_incomingrequests.o \
nmbd/nmbd_lmhosts.o nmbd/nmbd_logonnames.o nmbd/nmbd_mynames.o \
nmbd/nmbd_namelistdb.o nmbd/nmbd_namequery.o \
nmbd/nmbd_nameregister.o nmbd/nmbd_namerelease.o \
nmbd/nmbd_nodestatus.o nmbd/nmbd_packets.o \
nmbd/nmbd_processlogon.o nmbd/nmbd_responserecordsdb.o \
nmbd/nmbd_sendannounce.o nmbd/nmbd_serverlistdb.o \
nmbd/nmbd_subnetdb.o nmbd/nmbd_winsproxy.o nmbd/nmbd_winsserver.o \
nmbd/nmbd_workgroupdb.o nmbd/nmbd_synclists.o
NMBD_OBJ = $(NMBD_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
$(PROFILE_OBJ) $(LIB_OBJ)
WREPL_OBJ1 = wrepld/server.o wrepld/process.o wrepld/parser.o wrepld/socket.o \
wrepld/partners.o
WREPL_OBJ = $(WREPL_OBJ1) $(PARAM_OBJ) $(UBIQX_OBJ) \
$(PROFILE_OBJ) $(LIB_OBJ)
SWAT_OBJ = web/cgi.o web/diagnose.o web/startstop.o web/statuspage.o \
web/swat.o web/neg_lang.o $(PRINTING_OBJ) $(LIBSMB_OBJ) $(LOCKING_OBJ) \
$(PARAM_OBJ) $(PASSDB_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ) $(GROUPDB_OBJ) $(PLAINTEXT_AUTH_OBJ) \
smbwrapper/shared.o
SMBSH_OBJ = smbwrapper/smbsh.o smbwrapper/shared.o \
$(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
MAKE_PRINTERDEF_OBJ = utils/make_printerdef.o $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ)
STATUS_OBJ = utils/status.o $(LOCKING_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ)
SMBCONTROL_OBJ = utils/smbcontrol.o $(LOCKING_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ)
SMBTREE_OBJ = utils/smbtree.o $(LOCKING_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) $(LIBSMB_OBJ)
TESTPARM_OBJ = utils/testparm.o \
$(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
TESTPRNS_OBJ = utils/testprns.o $(PARAM_OBJ) $(PRINTING_OBJ) $(UBIQX_OBJ) \
$(LIB_OBJ)
SMBPASSWD_OBJ = utils/smbpasswd.o $(PARAM_OBJ) \
$(LIBSMB_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ)\
$(UBIQX_OBJ) $(LIB_OBJ)
PDBEDIT_OBJ = utils/pdbedit.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(PASSDB_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ) $(GROUPDB_OBJ)
SMBGROUPEDIT_OBJ = utils/smbgroupedit.o $(GROUPDB_OBJ) $(PARAM_OBJ) \
$(LIBSMB_OBJ) $(PASSDB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
RPCCLIENT_OBJ1 = rpcclient/rpcclient.o rpcclient/cmd_lsarpc.o \
rpcclient/cmd_samr.o rpcclient/cmd_spoolss.o \
rpcclient/cmd_netlogon.o rpcclient/cmd_srvsvc.o \
rpcclient/cmd_dfs.o rpcclient/cmd_reg.o \
rpc_client/cli_login.o rpc_client/cli_netlogon.o \
rpcclient/display_sec.o
RPCCLIENT_OBJ = $(RPCCLIENT_OBJ1) \
$(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
$(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(LIBMSRPC_OBJ) \
$(READLINE_OBJ) $(GROUPDB_OBJ)
SAMSYNC_OBJ1 = rpcclient/samsync.o rpcclient/display_sec.o
SAMSYNC_OBJ = $(SAMSYNC_OBJ1) \
$(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
$(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(LIBMSRPC_OBJ) \
$(GROUPDB_OBJ)
PAM_WINBIND_OBJ = nsswitch/pam_winbind.po nsswitch/wb_common.po lib/snprintf.po
SMBW_OBJ = smbwrapper/smbw.o \
smbwrapper/smbw_dir.o smbwrapper/smbw_stat.o \
smbwrapper/realcalls.o smbwrapper/shared.o \
smbwrapper/smbw_cache.o \
$(LIBSMB_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ)
SMBWRAPPER_OBJ = $(SMBW_OBJ) smbwrapper/wrapped.o
LIBSMBCLIENT_OBJ = libsmb/libsmbclient.o $(LIB_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ)
CLIENT_OBJ = client/client.o client/clitar.o \
$(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
$(READLINE_OBJ)
NET_OBJ = utils/net.o utils/net_ads.o utils/net_help.o \
utils/net_rap.o utils/net_rpc.o \
utils/net_rpc_join.o utils/net_time.o utils/net_lookup.o \
$(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_OBJ) \
$(GROUPDB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
CUPS_OBJ = client/smbspool.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
MOUNT_OBJ = client/smbmount.o \
$(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
MNT_OBJ = client/smbmnt.o \
$(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
UMOUNT_OBJ = client/smbumount.o \
$(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
NMBLOOKUP_OBJ = utils/nmblookup.o $(PARAM_OBJ) $(UBIQX_OBJ) \
$(LIBSMB_OBJ) $(LIB_OBJ)
SMBTORTURE_OBJ = torture/torture.o torture/nbio.o torture/scanner.o torture/utable.o \
torture/denytest.o torture/mangle_test.o \
$(LIBSMB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
MASKTEST_OBJ = torture/masktest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ)
MSGTEST_OBJ = torture/msgtest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ)
LOCKTEST_OBJ = torture/locktest.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ)
NSSTEST_OBJ = torture/nsstest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ)
LOCKTEST2_OBJ = torture/locktest2.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ)
SMBCACLS_OBJ = utils/smbcacls.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_OBJ) \
$(LIBMSRPC_OBJ) $(GROUPDB_OBJ)
TALLOCTORT_OBJ = lib/talloctort.o $(LIB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ)
RPCTORTURE_OBJ = torture/rpctorture.o \
rpcclient/display.o \
rpcclient/cmd_lsarpc.o \
rpcclient/cmd_wkssvc.o \
rpcclient/cmd_samr.o \
rpcclient/cmd_srvsvc.o \
rpcclient/cmd_netlogon.o \
$(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
$(RPC_CLIENT_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_OBJ)
DEBUG2HTML_OBJ = utils/debug2html.o ubiqx/debugparse.o
SMBFILTER_OBJ = utils/smbfilter.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
$(UBIQX_OBJ) $(LIB_OBJ)
PROTO_OBJ = $(SMBD_OBJ) $(NMBD_OBJ) $(SWAT_OBJ) $(CLIENT_OBJ) \
$(SMBWRAPPER_OBJ) $(SMBTORTURE_OBJ) $(RPCCLIENT_OBJ1) \
$(LIBMSRPC_OBJ) $(RPC_CLIENT_OBJ) $(AUTH_OBJ) $(NET_OBJ)
NSS_OBJ_0 = nsswitch/wins.o $(PARAM_OBJ) $(UBIQX_OBJ) $(LIBSMB_OBJ) $(LIB_OBJ) $(NSSWINS_OBJ)
NSS_OBJ = $(NSS_OBJ_0:.o=.po)
PICOBJS = $(SMBWRAPPER_OBJ:.o=.po)
PICOBJS32 = $(SMBWRAPPER_OBJ:.o=.po32)
LIBSMBCLIENT_PICOBJS = $(LIBSMBCLIENT_OBJ:.o=.po)
PAM_SMBPASS_OBJ_0 = pam_smbpass/pam_smb_auth.o pam_smbpass/pam_smb_passwd.o \
pam_smbpass/pam_smb_acct.o pam_smbpass/support.o \
lib/debug.o lib/util_sid.o lib/messages.o lib/util_str.o \
lib/wins_srv.o lib/substitute.o lib/select.o lib/util.o \
nsswitch/wb_client.o nsswitch/wb_common.o \
lib/system.o lib/util_file.o \
lib/genrand.o lib/username.o lib/util_getent.o lib/charcnv.o lib/time.o \
lib/md4.o lib/util_unistr.o lib/signal.o lib/talloc.o \
lib/ms_fnmatch.o lib/util_sock.o lib/smbrun.o \
lib/util_sec.o lib/snprintf.o \
ubiqx/ubi_sLinkList.o libsmb/smbencrypt.o libsmb/smbdes.o \
$(PARAM_OBJ) $(TDB_OBJ) $(PASSDB_OBJ)
PAM_SMBPASS_PICOOBJ = $(PAM_SMBPASS_OBJ_0:.o=.po)
WINBINDD_OBJ1 = \
nsswitch/winbindd.o \
nsswitch/winbindd_user.o \
nsswitch/winbindd_group.o \
nsswitch/winbindd_idmap.o \
nsswitch/winbindd_util.o \
nsswitch/winbindd_cache.o \
nsswitch/winbindd_pam.o \
nsswitch/winbindd_sid.o \
nsswitch/winbindd_misc.o \
nsswitch/winbindd_cm.o \
nsswitch/winbindd_wins.o \
nsswitch/winbindd_rpc.o \
nsswitch/winbindd_ads.o \
nsswitch/winbindd_dual.o
WINBINDD_OBJ = \
$(WINBINDD_OBJ1) $(NOPROTO_OBJ) $(PASSDB_OBJ) \
$(LIBNMB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
$(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) \
$(GROUPDB_OBJ) $(PROFILE_OBJ) $(UNIGRP_OBJ)
WBINFO_OBJ = nsswitch/wbinfo.o libsmb/smbencrypt.o libsmb/smbdes.o \
passdb/secrets.o
WINBIND_NSS_OBJ = nsswitch/winbind_nss.o nsswitch/wb_common.o @WINBIND_NSS_EXTRA_OBJS@
WINBIND_NSS_PICOBJS = $(WINBIND_NSS_OBJ:.o=.po)
POPT_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
popt/popthelp.o popt/poptparse.o
TDBBACKUP_OBJ = tdb/tdbbackup.o $(TDBBASE_OBJ)
######################################################################
# now the rules...
######################################################################
all : SHOWFLAGS proto_exists $(SPROGS) $(PROGS) $(WINBIND_PROGS) $(WINBIND_SPROGS) $(LPROGS) $(SHLIBS)
pam_smbpass : SHOWFLAGS bin/pam_smbpass.@SHLIBEXT@
smbwrapper : SHOWFLAGS bin/smbsh bin/smbwrapper.@SHLIBEXT@ @WRAP32@
torture : SHOWFLAGS $(TORTURE_PROGS)
smbtorture : SHOWFLAGS bin/smbtorture
masktest : SHOWFLAGS bin/masktest
msgtest : SHOWFLAGS bin/msgtest
locktest : SHOWFLAGS bin/locktest
smbcacls : SHOWFLAGS bin/smbcacls
locktest2 : SHOWFLAGS bin/locktest2
rpctorture : SHOWFLAGS bin/rpctorture
debug2html : SHOWFLAGS bin/debug2html
smbfilter : SHOWFLAGS bin/smbfilter
talloctort : SHOWFLAGS bin/talloctort
nsswitch : SHOWFLAGS $(WINBIND_PROGS) $(WINBIND_SPROGS) $(LPROGS)
wins : SHOWFLAGS nsswitch/libnss_wins.so
everything: all libsmbclient debug2html smbfilter talloctort bin/samsync bin/make_printerdef
.SUFFIXES:
.SUFFIXES: .c .o .po .po32 .lo
SHOWFLAGS:
@echo "Using FLAGS = $(FLAGS)"
@echo " FLAGS32 = $(FLAGS32)"
@echo " LIBS = $(LIBS)"
@echo " LDSHFLAGS = $(LDSHFLAGS)"
@echo " LDFLAGS = $(LDFLAGS)"
MAKEDIR = || exec false; \
if test -d "$$dir"; then :; else \
echo mkdir "$$dir"; \
mkdir -p "$$dir" >/dev/null 2>&1 || \
test -d "$$dir" || \
mkdir "$$dir" || \
exec false; fi || exec false
.c.o:
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
@echo Compiling $*.c
@$(CC) -I. -I$(srcdir) $(FLAGS) -c $< \
-o $@
@BROKEN_CC@ -mv `echo $@ | sed 's%^.*/%%g'` $@
# These dependencies are only approximately correct: we want to make
# sure Samba's paths are updated if ./configure is re-run. Really it
# would be nice if "make prefix=/opt/samba all" also rebuilt things,
# but since we also require "make install prefix=/opt/samba" *not* to
# rebuild it's a bit hard.
dynconfig.o: dynconfig.c Makefile
@echo Compiling $*.c
@$(CC) $(FLAGS) $(PATH_FLAGS) -c $< -o $@
dynconfig.po: dynconfig.c Makefile
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
@echo Compiling $*.c with @PICFLAG@
@$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
@BROKEN_CC@ -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
@POBAD_CC@ @mv $*.po.o $@
.c.po:
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
@echo Compiling $*.c with @PICFLAG@
@$(CC) -I. -I$(srcdir) $(FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
@BROKEN_CC@ -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
@POBAD_CC@ @mv $*.po.o $@
# this is for IRIX
.c.po32:
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
@echo Compiling $*.c with @PICFLAG@ and -32
@$(CC) -32 -I. -I$(srcdir) $(FLAGS32) $(PATH_FLAGS) @PICFLAG@ -c $< \
-o $*.po32.o
@BROKEN_CC@ -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po32$$%.o%'` $@.o
@mv $*.po32.o $@
bin/.dummy:
@if (: >> $@ || : > $@) >/dev/null 2>&1; then :; else \
dir=bin $(MAKEDIR); fi
@: >> $@ || : > $@ # what a fancy emoticon!
bin/smbd: $(SMBD_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBD_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS)
bin/nmbd: $(NMBD_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(NMBD_OBJ) $(LDFLAGS) $(LIBS)
bin/wrepld: $(WREPL_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(WREPL_OBJ) $(LDFLAGS) $(LIBS)
bin/swat: $(SWAT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SWAT_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS)
bin/rpcclient: $(RPCCLIENT_OBJ) @BUILD_POPT@ bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(RPCCLIENT_OBJ) $(LDFLAGS) $(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @BUILD_POPT@
bin/samsync: $(SAMSYNC_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SAMSYNC_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS)
bin/smbclient: $(CLIENT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(CLIENT_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS)
bin/net: $(NET_OBJ) @BUILD_POPT@ bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(NET_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @BUILD_POPT@
bin/smbspool: $(CUPS_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(CUPS_OBJ) $(LDFLAGS) $(LIBS)
bin/smbmount: $(MOUNT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(MOUNT_OBJ) $(LDFLAGS) $(LIBS)
bin/smbmnt: $(MNT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(MNT_OBJ) $(LDFLAGS) $(LIBS)
bin/smbumount: $(UMOUNT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(UMOUNT_OBJ) $(LDFLAGS) $(LIBS)
bin/testparm: $(TESTPARM_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(TESTPARM_OBJ) $(LDFLAGS) $(LIBS)
bin/testprns: $(TESTPRNS_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(TESTPRNS_OBJ) $(LDFLAGS) $(LIBS)
bin/smbstatus: $(STATUS_OBJ) @BUILD_POPT@ bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(STATUS_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
bin/smbcontrol: $(SMBCONTROL_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBCONTROL_OBJ) $(LDFLAGS) $(LIBS)
bin/smbtree: $(SMBTREE_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBTREE_OBJ) $(LDFLAGS) $(LIBS)
bin/smbpasswd: $(SMBPASSWD_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBPASSWD_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS)
bin/pdbedit: $(PDBEDIT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(PDBEDIT_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @BUILD_POPT@
bin/smbgroupedit: $(SMBGROUPEDIT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBGROUPEDIT_OBJ) $(LDFLAGS) $(LIBS)
bin/nmblookup: $(NMBLOOKUP_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(NMBLOOKUP_OBJ) $(LDFLAGS) $(LIBS)
bin/make_printerdef: $(MAKE_PRINTERDEF_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(MAKE_PRINTERDEF_OBJ) $(LDFLAGS) $(LIBS)
bin/smbtorture: $(SMBTORTURE_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBTORTURE_OBJ) $(LDFLAGS) $(LIBS)
bin/talloctort: $(TALLOCTORT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(TALLOCTORT_OBJ) $(LDFLAGS) $(LIBS)
bin/masktest: $(MASKTEST_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(MASKTEST_OBJ) $(LDFLAGS) $(LIBS)
bin/msgtest: $(MSGTEST_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(MSGTEST_OBJ) $(LDFLAGS) $(LIBS)
bin/smbcacls: $(SMBCACLS_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBCACLS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS)
bin/locktest: $(LOCKTEST_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(LOCKTEST_OBJ) $(LDFLAGS) $(LIBS)
bin/nsstest: $(NSSTEST_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(NSSTEST_OBJ) $(LDFLAGS) $(LIBS)
bin/locktest2: $(LOCKTEST2_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(LOCKTEST2_OBJ) $(LDFLAGS) $(LIBS)
bin/rpctorture: $(RPCTORTURE_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(RPCTORTURE_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS)
bin/debug2html: $(DEBUG2HTML_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(DEBUG2HTML_OBJ) $(LDFLAGS) $(LIBS)
bin/smbfilter: $(SMBFILTER_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBFILTER_OBJ) $(LDFLAGS) $(LIBS)
bin/smbw_sample: $(SMBW_OBJ) utils/smbw_sample.o bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBW_OBJ) utils/smbw_sample.o $(LDFLAGS) $(LIBS)
bin/smbwrapper.@SHLIBEXT@: $(PICOBJS)
@echo Linking shared library $@
@$(SHLD) $(LDSHFLAGS) -o $@ $(PICOBJS) $(LDFLAGS) $(LIBS)
bin/smbwrapper.32.@SHLIBEXT@: $(PICOBJS32)
@echo Linking shared library $@
@$(SHLD) -32 $(LDSHFLAGS) -o $@ $(PICOBJS32) $(LIBS)
bin/libsmbclient.@SHLIBEXT@: $(LIBSMBCLIENT_PICOBJS)
echo Linking libsmbclient shared library $@
$(SHLD) $(LDSHFLAGS) -o $@ $(LIBSMBCLIENT_PICOBJS) $(LIBS)
bin/libsmbclient.a: $(LIBSMBCLIENT_PICOBJS)
@echo Linking libsmbclient non-shared library $@
-$(AR) -rc $@ $(LIBSMBCLIENT_PICOBJS)
libsmbclient: bin/libsmbclient.a bin/libsmbclient.@SHLIBEXT@
bin/smbsh: $(SMBSH_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBSH_OBJ) $(LDFLAGS) $(LIBS)
nsswitch/libnss_wins.so: $(NSS_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(NSS_OBJ) -lc
bin/winbindd: $(WINBINDD_OBJ) bin/.dummy
@echo Linking $@
@$(LINK) -o $@ $(WINBINDD_OBJ) $(DYNEXP) $(LIBS)
nsswitch/libnss_winbind.so: $(WINBIND_NSS_PICOBJS)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(WINBIND_NSS_PICOBJS) @WINBIND_NSS_EXTRA_LIBS@
nsswitch/pam_winbind.so: $(PAM_WINBIND_OBJ) bin/.dummy
@echo Linking $@
@$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_WINBIND_OBJ)
bin/wbinfo: $(WBINFO_OBJ) $(PARAM_OBJ) $(LIB_OBJ) $(NOPROTO_OBJ) \
$(UBIQX_OBJ) @BUILD_POPT@ bin/.dummy
@echo Linking $@
@$(LINK) -o $@ $(WBINFO_OBJ) $(PARAM_OBJ) $(LIB_OBJ) $(NOPROTO_OBJ) \
$(UBIQX_OBJ) $(LIBS) @BUILD_POPT@
bin/pam_smbpass.@SHLIBEXT@: $(PAM_SMBPASS_PICOOBJ)
@echo "Linking shared library $@"
$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_SMBPASS_PICOOBJ) -lpam $(DYNEXP) $(LIBS) -lc
bin/libmsrpc.a: $(LIBMSRPC_PICOBJ)
-$(AR) -rc $@ $(LIBMSRPC_PICOBJ)
bin/spamsync: rpcclient/samsync.o bin/libmsrpc.a
@$(LINK) -o $@ rpcclient/samsync.o bin/libmsrpc.a \
$(UBIQX_OBJ) $(LIBS)
bin/tdbbackup: $(TDBBACKUP_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(TDBBACKUP_OBJ)
install: installbin installman installscripts installdat installswat
installdirs:
@$(SHELL) $(srcdir)/script/installdirs.sh $(BASEDIR) $(BINDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(PRIVATEDIR)
installservers: all installdirs
@$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(SPROGS)
installbin: all installdirs
@$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(SPROGS)
@$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(BASEDIR) $(BINDIR) $(LIBDIR) $(VARDIR) $(PROGS)
installscripts: installdirs
@$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS) $(BINDIR) $(SCRIPTS)
installdat: installdirs
@$(SHELL) $(srcdir)/script/installdat.sh $(LIBDIR) $(srcdir)
installswat: installdirs
@$(SHELL) $(srcdir)/script/installswat.sh $(SWATDIR) $(srcdir)
installclientlib:
-$(INSTALLCMD) bin/libsmbclient.so ${prefix}/lib
-$(INSTALLCMD) -d ${prefix}/include
-$(INSTALLCMD) include/libsmbclient.h ${prefix}/include
# revert to the previously installed version
revert:
@$(SHELL) $(srcdir)/script/revert.sh $(SBINDIR) $(SPROGS)
@$(SHELL) $(srcdir)/script/revert.sh $(BINDIR) $(PROGS) $(SCRIPTS)
installman:
@$(SHELL) $(srcdir)/script/installman.sh $(MANDIR) $(srcdir) $(man_langs) "@ROFF@"
.PHONY: showlayout
showlayout:
@echo "Samba will be installed into:"
@echo " basedir: $(BASEDIR)"
@echo " bindir: $(BINDIR)"
@echo " sbindir: $(SBINDIR)"
@echo " libdir: $(LIBDIR)"
@echo " vardir: $(VARDIR)"
@echo " mandir: $(MANDIR)"
uninstall: uninstallman uninstallbin uninstallscripts
uninstallman:
@$(SHELL) $(srcdir)/script/uninstallman.sh $(MANDIR) $(srcdir) $(man_langs)
uninstallbin:
@$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(BASEDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(SPROGS)
@$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(BASEDIR) $(BINDIR) $(LIBDIR) $(VARDIR) $(PROGS)
uninstallscripts:
@$(SHELL) $(srcdir)/script/uninstallscripts.sh $(INSTALLPERMS) $(BINDIR) $(SCRIPTS)
# Toplevel clean files
TOPFILES=dynconfig.o dynconfig.po
clean: delheaders
-rm -f core */*~ *~ */*.o */*.po */*.po32 */*.@SHLIBEXT@ \
$(TOPFILES) $(PROGS) $(SPROGS) .headers.stamp
# Making this target will just make sure that the prototype files
# exist, not necessarily that they are up to date. Since they're
# removed by "make clean" this will always be run when you do anything
# afterwards.
proto_exists: include/proto.h include/wrepld_proto.h include/build_env.h nsswitch/winbindd_proto.h
delheaders:
@echo Removing prototype headers
@/bin/rm -f $(srcdir)/include/proto.h $(srcdir)/include/build_env.h
@/bin/rm -f $(srcdir)/include/wrepld_proto.h $(srcdir)/nsswitch/winbindd_proto.h
@/bin/rm -f include/proto.h include/build_env.h include/wrepld_proto.h nsswitch/winbindd_proto.h
include/proto.h:
@echo Building include/proto.h
@cd $(srcdir) && $(AWK) -f script/mkproto.awk `echo $(PROTO_OBJ) | tr ' ' '\n' | sed -e 's/\.o/\.c/g' | sort -u | egrep -v 'ubiqx/|wrapped'` > $(builddir)/include/proto.h
include/build_env.h:
@echo Building include/build_env.h
@cd $(srcdir) && $(SHELL) script/build_env.sh $(srcdir) $(builddir) $(CC) > $(builddir)/include/build_env.h
include/wrepld_proto.h:
@echo Building include/wrepld_proto.h
@cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
-h _WREPLD_PROTO_H_ $(builddir)/include/wrepld_proto.h \
$(WREPL_OBJ1)
nsswitch/winbindd_proto.h:
@cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
-h _WINBINDD_PROTO_H_ nsswitch/winbindd_proto.h \
$(WINBINDD_OBJ1)
# "make headers" or "make proto" calls a subshell because we need to
# make sure these commands are executed in sequence even for a
# parallel make.
headers:
$(MAKE) delheaders include/proto.h include/build_env.h include/wrepld_proto.h nsswitch/winbindd_proto.h
proto: headers winbindd_proto
winbindd_proto: headers
.PHONY: headers proto
etags:
etags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
ctags:
ctags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
realclean: clean
-rm -f config.log $(PROGS) $(SPROGS) bin/.dummy
-rmdir bin
distclean: realclean
-rm -f include/config.h Makefile
-rm -f config.status config.cache so_locations
-rm -rf .deps
# this target is really just for my use. It only works on a limited
# range of machines and is used to produce a list of potentially
# dead (ie. unused) functions in the code. (tridge)
finddead:
nm */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
nm */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
comm -13 nmused.txt nmfns.txt
# when configure.in is updated, reconfigure
$(srcdir)/configure: $(srcdir)/configure.in
@echo "WARNING: you need to rerun autoconf"
config.status: $(srcdir)/configure
@echo "WARNING: you need to run configure"
Makefile: $(srcdir)/Makefile.in config.status
@echo "WARNING: you need to run ./config.status"
test_prefix=/tmp/test-samba
# Run regression suite using the external "satyr" framework
check:
@echo "** Sorry, samba self-test without installation does not work "
@echo "** yet. Please try specifying a scratch directory to"
@echo "** ./configure --prefix DIR"
@echo "** then run \"make install installcheck\""
exit 1
# -rm -rf $(test_prefix)/lib
# mkdir $(test_prefix)/lib -p ./testdir
# PATH=$(builddir)/bin:$(PATH) \
# SATYR_SUITEDIR=../testsuite/build_farm/ prefix=$(test_prefix) \
# testdir=./testdir $(SHELL) satyr
# Run regression suite on the installed version.
# `installcheck'
# Perform installation tests (if any). The user must build and
# install the program before running the tests. You should not
# assume that `$(bindir)' is in the search path.
dangerous-installcheck:
mkdir -p $(BASEDIR)/lib
mkdir -p $(BASEDIR)/var
PATH=$(BINDIR):$(SBINDIR):$(PATH) \
SATYR_DISCOURAGE=1 \
SATYR_SUITEDIR=../testsuite/satyr/ prefix=$(BASEDIR) \
LIBSMB_PROG=$(SBINDIR)/smbd \
testdir=./testdir $(SHELL) satyr
View Git Blame Copy Permalink