samba-mirror/docs/textdocs/ENCRYPTION.txt

		LanManager / Samba Password Encryption.
		---------------------------------------

With the development of LanManager compatible password encryption for
Samba, it is now able to validate user connections in exactly the same
way as a LanManager or Windows NT server.

This document describes how the SMB password encryption algorithm
works and what issues there are in choosing whether you want to use
it. You should read it carefully, especially the part about security
and the "PROS and CONS" section.

How does it work ?
------------------

	LanManager encryption is somewhat similar to UNIX password
encryption. The server uses a file containing a hashed value of a
users password.  This is created by taking the users paintext
password, capitalising it, and either truncating to 14 bytes (or
padding to 14 bytes with null bytes). This 14 byte value is used as
two 56 bit DES keys to encrypt a 'magic' eight byte value, forming a
16 byte value which is stored by the server and client. Let this value
be known as the *hashed password*.

When a client (LanManager, Windows for WorkGroups, Windows 95 or
Windows NT) wishes to mount a Samba drive (or use a Samba resource) it
first requests a connection and negotiates the protocol that the client
and server will use. In the reply to this request the Samba server
generates and appends an 8 byte, random value - this is stored in the
Samba server after the reply is sent and is known as the *challenge*.

The challenge is different for every client connection.

The client then uses the hashed password (16 byte value described
above), appended with 5 null bytes, as three 56 bit DES keys, each of
which is used to encrypt the challenge 8 byte value, forming a 24 byte
value known as the *response*.

In the SMB call SMBsessionsetupX (when user level security is
selected) or the call SMBtconX (when share level security is selected)
the 24 byte response is returned by the client to the Samba server.

The Samba server then reproduces the above calculation, using it's own
stored value of the 16 byte hashed password (read from the smbpasswd
file - described later) and the challenge value that it kept from the
negotiate protocol reply. It then checks to see if the 24 byte value it
calculates matches the 24 byte value returned to it from the client.

If these values match exactly, then the client knew the correct
password (or the 16 byte hashed value - see security note below) and
is this allowed access. If not then the client did not know the
correct password and is denied access.

Note that the Samba server never knows or stores the cleartext of the
users password - just the 16 byte hashed function derived from it. Also
note that the cleartext password or 16 byte hashed value are never
transmitted over the network - thus increasing security.

IMPORTANT NOTE ABOUT SECURITY
-----------------------------

The unix and SMB password encryption techniques seem similar on the
surface. This similarity is, however, only skin deep. The unix scheme
typically sends clear text passwords over the nextwork when logging
in. This is bad. The SMB encryption scheme never sends the cleartext
password over the network but it does store the 16 byte hashed value
on disk. This is also bad. Why? Because the 16 byte hashed value is a
"password equivalent". You cannot derive the users password from it,
but it could potentially be used in a modified client to gain access
to a server. This would require considerable technical knowledge on
behalf of the attacker but is perfectly possible. You should thus
treat the smbpasswd file as though it contained the cleartext
passwords of all your users. Its contents must be kept secret, and the
file should be protected accordingly.

Ideally we would like a password scheme which neither requires plain
text passwords on the net or on disk. Unfortunately this is not
available as Samba is stuck with being compatible with other SMB
systems (WinNT, WfWg, Win95 etc). 


PROS AND CONS
-------------

There are advantages and disadvantages to both schemes. 

Advantages of SMB Encryption:
-----------------------------

- plain text passwords are not passed across the network. Someone using
a network sniffer cannot just record passwords going to the SMB server.

- WinNT doesn't like talking to a server that isn't using SMB
encrypted passwords. It will refuse to browse the server if the server
is also in user level security mode. It will insist on promting the
user for the password on each connection, which is very annoying. The
only things you can do to stop this is to use SMB encryption.

Advantages of non-encrypted passwords:
--------------------------------------

- plain text passwords are not kept on disk. 

- uses same password file as other unix services such as login and
ftp

- you are probably already using other services (such as telnet and
ftp) which send plain text passwords over the net, so not sending them
for SMB isn't such a big deal.

- the SMB encryption code in Samba is new and has only had limited
testing. We have tried hard to make it secure but in any new
implementation of a password scheme there is the possability of an
error. 


The smbpasswd file.
-------------------

	In order for Samba to participate in the above protocol it must
be able to look up the 16 byte hashed value given a user name.
Unfortunately, as the UNIX password value is also a one way hash
function (ie. it is impossible to retrieve the cleartext of the users
password given the UNIX hash of it) then a separate password file
containing this 16 byte value must be kept. To minimise problems with
these two password files, getting out of sync, the UNIX /etc/passwd and
the smbpasswd file, a utility, mksmbpasswd.sh, is provided to generate
a smbpasswd file from a UNIX /etc/passwd file.

To generate the smbpasswd file from your /etc/passwd file use the
following command :-

cat /etc/passwd | mksmbpasswd.sh >/usr/local/samba/private/smbpasswd

If you are running on a system that uses NIS, use

ypcat passwd | mksmbpasswd.sh >/usr/local/samba/private/smbpasswd

The mksmbpasswd.sh program is found in the Samba source directory. By
default, the smbpasswd file is stored in :-

/usr/local/samba/private/smbpasswd

The owner of the /usr/local/samba/private directory should be set to
root, and the permissions on it should be set to :-

r-x------

The command 

chmod 500 /usr/local/samba/private

will do the trick. Likewise, the smbpasswd file inside the private
directory should be owned by root and the permissions on is should be
set to

rw-------

by the command :-

chmod 600 smbpasswd.

The format of the smbpasswd file is

username:uid:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:Long name:user home dir:user shell

Although only the username, uid, and XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
sections are significant and are looked at in the Samba code.

It is *VITALLY* important that there by 32 'X' characters between the
two ':' characters - the smbpasswd and Samba code will fail to validate
any entries that do not have 32 characters between ':' characters.

When the password file is created all users have password entries
consisting of 32 'X' characters. By default this disallows any access
as this user. When a user has a password set, the 'X' characters change
to 32 ascii hexadecimal digits (0-9, A-F). These are an ascii
representation of the 16 byte hashed value of a users password.

To set a user to have no password (not recommended), edit the file
using vi, and replace the first 11 characters with the asci text

NO PASSWORD

Eg. To clear the password for user bob, his smbpasswd file entry would
look like :

bob:100:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:Bob's full name:/bobhome:/bobshell

If you are allowing users to use the smbpasswd command to set their own
passwords, you may want to give users NO PASSWORD initially so they do
not have to enter a previous password when changing to their new
password (not recommended).

Note : This file should be protected very carefully. Anyone with
access to this file can (with enough knowledge of the protocols) gain
access to your SMB server. The file is thus more sensitive than a
normal unix /etc/passwd file.

The smbpasswd Command.
----------------------

	The smbpasswd command maintains the 32 byte password field in
the smbpasswd file. If you wish to make it similar to the unix passwd
or yppasswd programs, install it in /usr/local/samba/bin (or your main
Samba binary directory) and make it setuid root.

Note that if you do not do this then the root user will have to set all
users passwords.

To set up smbpasswd as setuid root, change to the Samba binary install
directory and then type (as root) :

chown root smbpasswd
chmod 4555 smbpasswd

If smbpasswd is installed as setuid root then you would use it as
follows.

smbpasswd
Old SMB password: <type old alue here - just hit return if there is NO PASSWORD>
New SMB Password: < type new value >
Repeat New SMB Password: < re-type new value >

If the old value does not match the current value stored for that user,
or the two new values do not match each other, then the password will
not be changed.

If invoked by an ordinary user it will only allow the user to change
his or her own Samba password.

If run by the root user smbpasswd may take an optional argument,
specifying the user name whose SMB password you wish to change.  Note
that when run as root smbpasswd does not prompt for or check the old
password value, thus allowing root to set passwords for users who have
forgotten their passwords.

smbpasswd is designed to work in the same way and be familiar to UNIX
users who use the passwd or yppasswd commands.

NOTE. As smbpasswd is designed to be installed as setuid root I would
appreciate it if everyone examined the source code to look for
potential security flaws. A setuid program, if not written properly can
be an open door to a system cracker. Please help make this program
secure by reporting all problems to me (the author, Jeremy Allison).

My email address is :-

jra@vantive.com

Setting up Samba to support LanManager Encryption.
--------------------------------------------------

This is a very brief description on how to setup samba to support
password encryption. More complete instructions will probably be added
later.

1) get and compile the libdes libraries. the source is available from
nimbus.anu.edu.au in pub/tridge/libdes/libdes.tar.92-10-13.gz

2) enable the encryption stuff in the Samba makefile, making sure you
point it to the libdes library and include file (it needs des.h)
The entries you need to uncomment are the four lines after the comment :-

# This is for SMB encrypted (lanman) passwords.

Note that you may have to change the variable DES_BASE to
point at the place where you installed the DES library.

3) compile and install samba as usual

4) f your system can't compile the module getsmbpass.c then remove the
-DSMBGETPASS define from the Makefile.

5) enable encrypted passwords in smb.conf by adding the line 
"encrypt passwords = yes" in the [global] section

6) create the initial smbpasswd password file in the place you
specified in the Makefile. A simple way to do this based on your
existing Makefile (assuming it is in a reasonably standard format) is
like this:

cat /etc/passwd | mksmbpasswd.sh > /usr/local/samba/private/smbpasswd

Change ownership of private and smbpasswd to root.

chown -R root /usr/local/samba/private

Set the correct permissions on /usr/local/samba/private

chmod 500 /usr/local/samba/private

Set the correct permissions on /usr/local/samba/private/smbpasswd

chmod 600 /usr/local/samba/private/smbpasswd

note that the mksmbpasswd.sh script is in the samba source directory.

If this fails then you will find that you will need entries that look
like this:

# SMB password file.
tridge:148:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:Andrew Tridgell:/home/tridge:/bin/tcsh

note that the uid and username fields must be right. Also, you must get
the number of X's right (there should be 32).

If you wish, install the smbpasswd program as suid root.

chown root /usr/local/samba/bin/smbpasswd
chmod 4555 /usr/local/samba/bin/smbpasswd

7) set the passwords for users using the smbpasswd command. For
example, as root you could do "smbpasswd tridge"

8) try it out!

Note that you can test things using smbclient, as it also now supports
encryption.

NOTE TO USA Sites that Mirror Samba
-----------------------------------

The DES library is considered a munition in the USA. Under US Law it is
illegal to export this software, or to put it in a freely available ftp
site.

Please do not mirror the DES directory from the site on nimbus.anu.edu.au

Thank you,

Jeremy Allison.