IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Just like the set-var-fmt action for tcp/http rules, the set-var-fmt
directive in global sections allows to pre-set process-wide variables
using a format string instead of a sample expression. This is often
more convenient when it is required to concatenate multiple fields,
or when emitting just one word.
The set-var() action is convenient because it preserves the input type
but it's a pain to deal with when trying to concatenate values. The
most recurring example is when it's needed to build a variable composed
of the source address and the source port. Usually it ends up like this:
tcp-request session set-var(sess.port) src_port
tcp-request session set-var(sess.addr) src,concat(":",sess.port)
This is even worse when trying to aggregate multiple fields from stick-table
data for example. Due to this a lot of users instead abuse headers from HTTP
rules:
http-request set-header(x-addr) %[src]:%[src_port]
But this requires some careful cleanups to make sure they won't leak, and
it's significantly more expensive to deal with. And generally speaking it's
not clean. Plus it must be performed for each and every request, which is
expensive for this common case of ip+port that doesn't change for the whole
session.
This patch addresses this limitation by implementing a new "set-var-fmt"
action which performs the same work as "set-var" but takes a format string
in argument instead of an expression. This way it becomes pretty simple to
just write:
tcp-request session set-var-fmt(sess.addr) %[src]:%[src_port]
It is usable in all rulesets that already support the "set-var" action.
It is not yet implemented for the global "set-var" directive (which already
takes a string) and the CLI's "set var" command, which would definitely
benefit from it but currently uses its own parser and engine, thus it
must be reworked.
The doc and regtests were updated.
Sometimes it is convenient to remap large sets of URIs to new ones (e.g.
after a site migration for example). This can be achieved using
"http-request redirect" combined with maps, but one difficulty there is
that non-matching entries will return an empty response. In order to
avoid this, duplicating the operation as an ACL condition ending in
"-m found" is possible but it becomes complex and error-prone while it's
known that an empty URL is not valid in a location header.
This patch addresses this by improving the redirect rules to be able to
simply ignore the rule and skip to the next one if the result of the
evaluation of the "location" expression is empty. However in order not
to break existing setups, it requires a new "ignore-empty" keyword.
There used to be an ACT_FLAG_FINAL on redirect rules that's used during
the parsing to emit a warning if followed by another rule, so here we
only set it if the option is not there. The http_apply_redirect_rule()
function now returns a 3rd value to mention that it did nothing and
that this was not an error, so that callers can just ignore the rule.
The regular "redirect" rules were not modified however since this does
not apply there.
The map_redirect VTC was completed with such a test and updated to 2.5
and an example was added into the documentation.
Those fetches are used to identify connection errors and SSL handshake
errors on the backend side of a connection. They can for instance be
used in a log-format line as in the regtest.
This option can be used to define a specific log format that will be
used in case of error, timeout, connection failure on a frontend... It
will be used for any log line concerned by the log-separate-errors
option. It will also replace the format of specific error messages
decribed in section 8.2.6.
If no "error-log-format" is defined, the legacy error messages are still
emitted and the other error logs keep using the regular log-format.
The test that removes server via CLI is using LUA to check that servers
referenced in a LUA script cannot be removed. This requires LUA support
to be built in haproxy.
Split the test and create a new one containing only the LUA relevant
test. Mark it as LUA dependant.
Relax the condition on "delete server" CLI handler to be able to remove
all servers, even non dynamic, except if they are flagged as non
purgeable.
This change is necessary to extend the use cases for dynamic servers
with reload. It's expected that each dynamic server created via the CLI
is manually commited in the haproxy configuration by the user. Dynamic
servers will be present on reload only if they are present in the
configuration file. This means that non-dynamic servers must be allowed
to be removable at runtime.
The dynamic servers removal reg-test has been updated and renamed to
reflect its purpose. A new test is present to check that non-purgeable
servers cannot be removed.
Since commit 8d6c6bd ("Leak-plugging on barriers") VTest has become
stricter in its expectations, making this one fail. The agent-check
test was expecting a close on the server, which normally does not
happen before the server responds. In addition, it was really sending
"hello" (with the quotes) due to the config file syntax, which explains
why test test log reported that '"hell' was received, and complained
that 0x6f ('o') was read instead of a shutdown. This has been fixed
as well by using single-quotes.
There is no need to backport this test as it's only in 2.5.
The abortonclose test was only expecting a close after all server
retries were exhausted, it didn't check for the pending 503, which
fails with new versions of vtest starting with commit 8d6c6bd
("Leak-plugging on barriers").
This may be backported, but carefully in case older versions would
really close without responding.
Commit e1b9e1bb1 ("REGTESTS: Add script to tests TCP to HTTP upgrades")
included a mistake in the TCP->H1->H2 test, it expected a close while
it ought to expect a 400 bad req, which is what the mux returns in this
case. It happens that this used to work fine with older versions of
vtest which see the close regardless of the 400, but since Vtest commit
8d6c6bd ("Leak-plugging on barriers"), this doesn't work anymore.
Let's fix this by expecting the proper response. This should be backported
where this regtest is present, but only after verifying that it still
works; indeed at the time of writing it's uncertain whether an earlier
version used to immediately close.
Most of the SSL sample fetches related to the client certificate were
based on the SSL_get_peer_certificate function which returns NULL when
the verification process failed. This made it impossible to use those
fetches in a log format since they would always be empty.
The patch adds a reference to the X509 object representing the client
certificate in the SSL structure and makes use of this reference in the
fetches.
The reference can only be obtained in ssl_sock_bind_verifycbk which
means that in case of an SSL error occurring before the verification
process ("no shared cipher" for instance, which happens while processing
the Client Hello), we won't ever start the verification process and it
will be impossible to get information about the client certificate.
This patch also allows most of the ssl_c_XXX fetches to return a usable
value in case of connection failure (because of a verification error for
instance) by making the "conn->flags & CO_FL_WAIT_XPRT" test (which
requires a connection to be established) less strict.
Thanks to this patch, a log-format such as the following should return
usable information in case of an error occurring during the verification
process :
log-format "DN=%{+Q}[ssl_c_s_dn] serial=%[ssl_c_serial,hex] \
hash=%[ssl_c_sha1,hex]"
It should answer to GitHub issue #693.
This test ensure that h2 pseudo headers are properly checked for invalid
characters and the host header is ignored if :authority is present. This
is necessary to prevent h2 desync attacks as described here
https://portswigger.net/research/http2
Add a missing 'rxreq' statement in first server. Without it the test is
unstable. The issue is frequent when running with one thread only.
This should fix github issue #1342.
Write a regtest to validate check support by dynamic servers. Three
differents servers are added on various configuration :
- server OK
- server DOWN
- agent-check
Rename the 'dontloglegacyconnerr' option to 'log-error-via-logformat'
which is much more self-explanatory and readable.
Note: only legacy keywords don't use hyphens, it is recommended to
separate words with them in new keywords.
Disable the new ssl_errors.vtc reg-tests because in does not work
correctly on the CI since it requires a version of OpenSSL which is
compatible with TLSv1.3 and the ciphersuites keyword.
This reg-test checks that the connection and SSL sample fetches related
to errors are functioning properly. It also tests the proper behaviour
of the default HTTPS log format and of the log-legacy-conn-error option
which enables or disables the output of a special error message in case
of connection failure (otherwise a line following the configured
log-format is output).
Now that we support logic expressions, variables and parenthesis, let's
add a few more tests to check_conditions.vtc. The tests are conditionned
by the version being at least 2.5-dev2 so that it will not cause failures
during a possible later bisect session or if backported.
The test verifies that exported variables are seen, that operators precedence
works as expected, that parenthesis work at least through two levels, that an
empty condition is false while a negative number is true, and that extraneous
chars in an expression, or unfinished strings are properly caught.
The test consists in a sequence of shell commands, but the shell is not
necessarily started with strict errors enabled, so only the last command
provides the verdict. Let's add "set -e" to make it fail on the first
test that fails.
Create a regtest for the 'track' keyword support by dynamic servers.
First checks are executed to ensure that tracking cannot be activated on
non-check server or dynamic servers.
Then, 3 scenarii are written to ensure that the deletion of a dynamic
server with track is properly handled and other servers in the track
chain are properly maintained.
When a default-server line specified a client certificate to use, the
frontend would not take it into account and create an empty SSL context,
which would raise an error on the backend side ("peer did not return a
certificate").
This bug was introduced by d817dc733eacfd7cf5bb0bbc6128f44644db078e in
which the SSL contexts are created earlier than before (during the
default-server line parsing) without setting it in the corresponding
server structures. It then made the server create an empty SSL context
in ssl_sock_prepare_srv_ctx because it thought it needed one.
It was raised on redmine, in Bug #3906.
It can be backported to 2.4.
This test ensure that http scheme-based normalization is properly
applied on target URL and host header. It uses h2 clients as it is not
possible to specify an absolute url for h1 vtc clients.
As specified by the MQTT specification (MQTT-3.1.3-6), the client ID may be
empty. That means the length of the client ID string may be 0. However, The
MQTT parser does not support empty strings.
So, to fix the bug, the mqtt_read_string() function may now parse empty
string. 2 bytes must be found to decode the string length, but the length
may be 0 now. It is the caller responsibility to test the string emptiness
if necessary. In addition, in mqtt_parse_connect(), the client ID may be
empty now.
This patch should partely fix the issue #1310. It must be backported to 2.4.
Parsing of too long strings (> 127 characters) was buggy because of a wrong
cast on the length bytes. To fix the bug, we rely on mqtt_read_2byte_int()
function. This way, the string length is properly decoded.
This patch should partely fix the issue #1310. It must be backported to 2.4.
Correct the typo in the parameter used to update the 'maxconn' via
agent-check. The test is also completed to detect the update of maxconn
using CLI 'show stats'.
Create a new regtest to test SSL support for dynamic servers.
The first step of the test is to create the ca-file via the CLI. Then a
dynamic server is created with the ssl option using the ca-file. A
client request is made through it to achieve the test.
RFC 7231#5.3.4 makes a difference between a completely missing
'accept-encoding' header and an 'accept-encoding' header without any values.
This case was already correctly handled by accident, because an empty accept
encoding does not match any known encoding. However this resulted in the
'other' encoding being added to the bitmap. Usually this also succeeds in
serving cached responses, because the cached response likely has no
'content-encoding', thus matching the identity case instead of not serving the
response, due to the 'other' encoding. But it's technically not 100% correct.
Fix this by special-casing 'accept-encoding' values with a length of zero and
extend the test to check that an empty accept-encoding is correctly handled.
Due to the reasons given above the test also passes without the change in
cache.c.
Vary support was added in HAProxy 2.4. This fix should be backported to 2.4+.
To perform servers resolution, the resolver's lock is first acquired then
the server's lock when necessary. However, when the fqdn is set via the CLI,
the opposite is performed. So, it is possible to experience an ABBA
deadlock.
To fix this bug, the server's lock is acquired and released for each
subcommand of "set server" with an exception when the fqdn is set. The
resolver's lock is first acquired. Of course, this means we must be sure to
have a resolver to lock.
This patch must be backported as far as 1.8.
This one was deprecated in 2.3 and marked for removal in 2.5. It suffers
too many limitations compared to threads, and prevents some improvements
from being engaged. Instead of a bypassable startup error, there is now
a hard error.
The parsing code was removed, and very few obvious cases were as well.
The code is deeply rooted at certain places (e.g. "for" loops iterating
from 0 to nbproc) so it will not be that trivial to remove everywhere.
The "bind" and "bind-process" parsers will have to be adjusted, though
maybe not completely changed if we later want to support thread groups
for large NUMA machines. Some stats socket restrictions were removed,
and the doc was updated according to what was done. A few places in the
doc still refer to nbproc and will have to be revisited. The master-worker
code also refers to the process number to distinguish between master and
workers and will have to be carefully adjusted. The MAX_PROCS macro was
reset to 1, this will at least reduce the size of some remaining arrays.
Two regtests were dependieng on this directive, one with an explicit
"nbproc 1" and another one testing the master's CLI using nbproc 4.
Both were adapted.
The `show ssl ocsp-response` feature is not available with BoringSSL,
but we don't have a way to disable this feature only with boringSSL on
the CI. Disable the reg-test until we do.
This file adds tests for the new "show ssl ocsp-response" command and
the new "show ssl cert foo.pem.ocsp" and "show ssl cert *foo.pem.ocsp"
special cases. They are all used to display information about an OCSP
response, committed or not.
This patch adds the `-cc` (check condition) argument to evaluate conditions on
startup and return the result as the exit code.
As an example this can be used to easily check HAProxy's version in scripts:
haproxy -cc 'version_atleast(2.4)'
This resolves GitHub issue #1246.
Co-authored-by: Tim Duesterhus <tim@bastelstu.be>
Since the commit 5e702fcad ("MINOR: http-ana: Use -1 status for client
aborts during queuing and connect"), -1 status is reported in the log
message when the client aborts during queuing and
connect. http_abortonclose.vtc script must be update accordingly.
This vtc tests the "new ssl crl-file" which allows to create a new empty
CRL file that can then be set through a "set+commit ssl crl-file"
command pair. It also tests the "del ssl crl-file" command which allows
to delete an unused CRL file.
This vtc tests the "new ssl ca-file" which allows to create a new empty
CA file that can then be set through a "set+commit ssl ca-file" command
pair. It also tests the "del ssl ca-file" command which allows to delete
an unused CA file.
This patch adds the "show ssl ca-file [<cafile>[:index]]" CLI command.
This command can be used to display the list of all the known CA files
when no specific file name is specified, or to display the details of a
specific CA file when a name is given. If an index is given as well, the
command will only display the certificate having the specified index in
the CA file (if it exists).
The details displayed for each certificate are the same as the ones
showed when using the "show ssl cert" command on a single certificate.
This fixes a subpart of GitHub issue #1057.
