IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add a simple edit window with 2 combo boxes for `sync-level` and
`chunk-order`.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ T: rework commit message/subject a bit ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we can still do that as notifications for prune jobs weren't released
yet.
We may want to evaluate if we adapt (some) other notification types
too on next major release.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
is left in the datastore. Before, the GUI would report "Never" for the
estimated time full, because the value provided in the backend was in
the past. To get around this, the GUI now reports "Full" if the value
for available reaches 0.
Signed-off-by: Daniel Tschlatscher <d.tschlatscher@proxmox.com>
The API now exposes the field 'available' as well, with which the
unprivileged total is calculated in all corresponsing views in the
frontend.
The rrd charts now also display the total as the unprivileged total
if available, otherwise the absolute total is used.
Signed-off-by: Daniel Tschlatscher <d.tschlatscher@proxmox.com>
The backend doesn't have an 'enable' option, but 'disable'. Convert
it to avoid a negative value that is checked "enabled".
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
namely 'catalog' and 'read-all-labels', by always opening a
window (with a drive now autoselected) and the two checkboxes
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The `ACME` panel may be rendered out of sight (overflow) when there
are enough SANs on the upper `Certificates` panel to push it down
enough and the browser/display height is too small.
Enable the `scrollable` config for the parent certificate view panel
in the y-axis (vertical) to make ExtJS automatically add a scrollbar
if the content overflows. Avoid enabling it for the x-axis too as
that breaks reflow of the layout if the browser window gets resized.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[T: fix commit message to one from manager ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we converted the prune settings of datastores to prune-jobs, but did
not actually implement the notifications for them, even though
we had the notification options in the gui (they did not work).
implement the basic ok/error notification for prune jobs
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
While finishing up my previous patch series I stumbled upon this file
which is not referenced anywhere in the proxmox-backup repository nor
in any of the other repositories as far as I can tell (except in the
Makefile).
I searched far and wide for any occurences and tested the backup
explorer GUI without it, which still seems to work normally.
Introduced in: 98425309b0
References removed in: 3e395378bc
Therefore I think this can be safely considered dead code and be
removed. It shall remain in the pve-devel archives forevermore anyway.
Signed-off-by: Daniel Tschlatscher <d.tschlatscher@proxmox.com>
when we set a default language server side, we want to display that on
the login page. For that we have to use the 'language' variable in the
index template.
Also set the fallback to '__default__' instead of 'en' so that we show
'Default (English)'.
Was reported in the forum:
https://forum.proxmox.com/threads/set-default-language-on-server-login-screen-to-german.114431/
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
simple CRUD interface to show/add/edit/delete metric servers
it's a bit different from PVE's so it's harder to reuse that than to
copy it. If we need it again, we can still refactor and combine them.
introduce 'PBS.Schema' class to hold the server type/xtype mappings
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
which allows us also to drop the initial manual load in the init,
which would also trigger if the tab isn't visible.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
setting scrollable on the parent tab panel makes not much sense and
will always add a scroll bar that can scroll a few pixels, even if
there's enough space.
Rather set it to true (= auto) in the actual panels that hold the
content.
Also set a bottom margin so that users can see the "end" of the panel
at the bottom, otherwise it looked like it had a start and sides, but
no bottom.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
input panel collect all form fields below them, so nesting two
input panels needs a bit of special care to avoid that each of the
panels adds the data of the deeper nested ones, resulting in
duplicate parameters that the backend then chokes one.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the intra-panel margin is still the same (10 + 0 == 7 + 3) but one
can now see the bottom border.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Fix missing load on initial view, re-use the prune input panel for
editing and avoid using a tab panel for a single tab, rework also
some columns widths and various other small parts-
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we already handle that manually in the onLoad and want to further
extend that, so drop the more generic monStoreError
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
with namespaces the paths can get pretty complex, so make the path
column take some flex space too, but not too much to avoid making it
look odd for the short paths we have otherwise
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Without namespaces this had not much use, but now that we can have
permissions below we should allow so.
For convenience also query the namsepaces here and add them to the
list of available ACL paths, the read-dir shouldn't be that expensive
(albeit, we could cache them in the frontend)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This reverts commit 7a1a5d206d.
We could already cause the behavior by simply setting ignore-verified
to false, aas that flag is basically an on/off switch for even
considering outdated-after or not.
So avoid the extra logic and just make the gui use the previously
existing way.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by filtering out the empty namespace from the api, and putting
manually a div with the grid-empty xclass around the gettext
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ T: reword commit message ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
'defaultStore' can be '' or null, so check for truthyness also, we
want the mapping to be a formField so that the validation triggers
and the restore button gets en/disabled accordingly. We still have to
call 'getValue' manually, because the onGetValues will get it as
string instead of an array
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
else it's a lot of wasted space for the ordinary case, that hasn't
permanent maintenance modes activated, and even if, their admins
should be used to it, so not the best space/usability ROI there
either.
Just use the icon as visual clue and add a tooltip for the
maintenance mode info.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to not having to query the activeTasks everywhere, change the renderer
to omit the check/spinner when no activeTasks are given
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
matches what we do for (most) of such things in PVE since 7.0 there
and also what the disk management gui shows, further disks are sold
with SI units for their advertised capacity, so its more fitting
there too.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
commit bd21a63b only fixed sync, not verify, and we can do better by
using a display-edit field.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we cannot change the id, and even if we send the same, the backend
does not allow 'duplicate' parameters (the id is in the url already)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by checking if *any* record has data, not only the first
this would prevent the chart from being shown for e.g. newly added
datastores, or for datastores after the server was offline for some time
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Not only can we remove a few lines of duplicated code, we also get
the "link to repo management" for free.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
only ask the name of the current NS, not the full NS path to avoid
too long input requirements on deep levels.
needs a few smaller hacks, ideally we would pull out the basic stuff
from Edit window in some EditBase window and let both, SafeDestroy
and Edit window derive from that, for better common, in sync
features.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
it maybe should still simple get dropped and replaced with
(empty)Text 'Root' or 'Root Namespace'
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
never makes sense to clear the value due to remote or remoteStore
change as we weren't enabled then in the first place.
This fixes clearing the currently set namespace on editing an
existing job, which always made it seem like the Root namespace was
selected, even if the originalValue was correct (thus the dirty-form
reset/ok behaviour still worked, making it even more confusing)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to avoid making it "jump" in the users face by immediately opening
the picker on window open.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to avoid that the comobox triggers automatic API request with the
queryParam default `query` GET param on manual typing (e.g., for
filtering) from the user, we have all data already loaded and locally
available.
https://docs.sencha.com/extjs/7.0.0/classic/Ext.form.field.ComboBox.html#cfg-queryMode
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This provides immediate feedback for adding the respective icon in
the navigation tree entry most of the time, and we can then increase
the query period of the datastore list store to the original 15
again, as it was lowered to 5 seconds for just this reason in commit
fbd6f54f39
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we query that store to add the datastore specific ACL paths to
improve UX there, this failed a while due the StoreManager lookup
always failing as the store wasn't registered in the StoreManager due
to using storeid vs. correct storeId
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
add a default namespace selector (of the current default store)
and a namespace selector per target datastore (for media-sets with
multiple datastores).
to achieve that we have to change the way we handle the mapping field a bit:
* don't use it as field directly (otherwise the value gets stringified),
but use the 'getValue' method in 'onGetValues'.
* set the defaultStore there, not only that we have one
(with this we can now easily show it as emptytext for each store)
* add a reference to the widgets to the record so that we can access
them in the respective change handler (also clean those references up,
else we have a cyclic reference between record <-> widget)
in onGetValues, if we have multiple datastores, the mapping grid does
all the work for us, otherwise, we have to create the ns mapping
ourselves there.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
since the namespaces are in the snapshot path we get here, we must parse
them out, else we confuse the first namespace with the group.
for now, show all namespaces on the same level (so not nested), and
do not allow for preselecting a namespace for restoring
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
for better re-usability in the future and it felt a bit odd to have
such specific logic in the sync job edit directly
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of using 'replaceChild', simply set the appropriate
properties. When using the 'nodeUpdate' (protected function of extjs,
intended to be overwritten) instead of the private 'updateNode', it
will be called when the properties change
This way, the treenode stays the same and it can keep the selection
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
they all still used some odd side effects of the tree structure to
decided what record type they operated on, just move them over to the
new `ty` record.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and transform to reST.
semantic changes to the content are:
* s/{pve}/`Proxmox Backup`_/g
* changing footnotes to parenthesized notes (did not see footnote use in
the current docs)
* removed the comment about systems setup before the introduction of
p-b-t (which was introduced before pbs)
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
this not only makes the action disable/hide checks simpler, but also
prepares the view a bit for the idea of adding a new API endpoint
that returns the whole datastore content tree as structured JSON so
that it can be directly loaded into a tree store.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
