IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
After having re-read the RFC, we noticed there are two bugs in the STREAM
frame parser. When the OFF bit (0x04) in the frame type is not set
we must set the offset to 0 (it was not set at all). When the LEN bit (0x02)
is not set we must extend the length of the data field to the end of the packet
(it was not set at all).
This is issue is due to the fact that when we call the function
responsible of building CRYPTO frames to fill a buffer, the Length
field of this packet did not take into an account the trailing 16 bytes for
the AEAD tag. Furthermore, the remaining <room> available in this buffer
was not decremented by the CRYPTO frame length, but only by the CRYPTO data length
of this frame.
This patch fixes GitHub issue #1023.
The function was introduced in commit 99c453d ("MEDIUM: ring: new
section ring to declare custom ring buffers."), which first appeared
in 2.2-dev9. The fix should be backported to 2.2+.
Ilya reported in issue #1010 that gcc 11 (still in development phase 3)
sees out-of-bounds accesses to tlskeys_reference. After a deep analysis
it turns out that the warning is erroneous and Tim could set up a
reproducer that was further simplified to file a gcc bug report (98503).
In order not to break builds on this version, let's temporarily disable
the warning, since no acceptable workaround could be defined. Once gcc
gets it right, the warning should be re-enabled as it is likely to catch
real errors (it's the first false positive here for us even though
roughly one hundred issues were reported around this one alone).
This allows using the address of the server rather than the name of the
server for keeping track of servers in a backend for stickiness.
The peers code was also extended to support feeding the dictionary using
this key instead of the name.
Fixes#814
This patch fixes GitHub Issue #988. Commit ce9e7b2521
was not sufficient, because it fell back to a hash comparison if the bitmap
of known encodings was not acceptable instead of directly returning the the
cached response is not compatible.
This patch also extends the reg-test to test the hash collision that was
mentioned in #988.
Vary handling is 2.4, no backport needed.
The accept-encoding normalizer now explicitely manages a subset of
encodings which will all have their own bit in the encoding bitmap
stored in the cache entry. This way two requests with the same primary
key will be served the same cache entry if they both explicitely accept
the stored response's encoding, even if their respective secondary keys
are not the same and do not match the stored response's one.
The actual hash of the accept-encoding will still be used if the
response's encoding is unmanaged.
The encoding matching and the encoding weight parsing are done for every
subpart of the accept-encoding values, and a bitmap of accepted
encodings is built for every request. It is then tested upon any stored
response that has the same primary key until one with an accepted
encoding is found.
The specific "identity" and "*" accept-encoding values are managed too.
When storing a response in the key, we also parse the content-encoding
header in order to only set the response's corresponding encoding's bit
in its cache_entry encoding bitmap.
This patch fixes GitHub issue #988.
It does not need to be backported.
The accept-encoding part of the secondary key (vary) was only built out
of the first occurrence of the header. So if a client had two
accept-encoding headers, gzip and br for instance, the key would have
been built out of the gzip string. So another client that only managed
gzip would have been sent the cached resource, even if it was a br resource.
The http_find_header function is now called directly by the normalizers
so that they can manage multiple headers if needed.
A request that has more than 16 encodings will be considered as an
illegitimate request and its response will not be stored.
This fixes GitHub issue #987.
It does not need any backport.
If any of the secondary hash normalizing functions raises an error, the
secondary hash will be unusable. In this case, the response will not be
stored anymore.
Add traces to have an idea why this function may fail. In fact
in never fails when the passed parameters are correct, especially the
lengths. This is not the case when a packet is not correctly built
before being encrypted.
Even if the size of frames built by qc_build_frm() are computed so that
not to overflow a buffer, do not rely on this and always makes a packet
build fails if we could not build a frame.
Also add traces to have an idea where qc_build_frm() fails.
Fixes a memory leak in qc_build_phdshk_apkt().
This salt is ued at leat up to draft-32. At this date ngtcp2 always
uses this salt even if it started the draft-33 development.
Note that when the salt is not correct, we cannot remove the header
protection. In this case the packet number length is wrong.
At least displays the SSL alert error code passed to ->ssl_send_alert()
QUIC BIO method and the SSL encryption level. This function is newly called
when using picoquic client with a recent version of BoringSSL (Nov 19 2020).
This is not the case with OpenSSL with 32 as QUIC draft implementation.
Reorder by increasing type the switch/case in qc_parse_pkt_frms()
which is the high level frame parser.
Add new STREAM_X frame types to support some tests with ngtcp2 client.
Add ->flags to the QUIC frame parser as this has been done for the builder so
that to flag RX packets as ack-eliciting at low level. This should also be
helpful to maintain the code if we have to add new flags to RX packets.
Remove the statements which does the same thing as higher level in
qc_parse_pkt_frms().
Remove ->ifcdata which was there to control the CRYPTO data sent to the
peer so that not to saturate its reception buffer. This was a sort
of flow control.
Add ->prep_in_flight counter to the QUIC path struct to control the
number of bytes prepared to be sent so that not to saturare the
congestion control window. This counter is increased each time a
packet was built. This has nothing to see with ->in_flight which
is the real in flight number of bytes which have really been sent.
We are olbiged to maintain two such counters to know how many bytes
of data we can prepared before sending them.
Modify traces consequently which were useful to diagnose issues about
the congestion control window usage.
As there is a lot of information in this protocol, this is not
easy to make the traces readable. We remove here a few of them and
shorten some line shortening the variable names.
This patch is there to initialize the default transport parameters for QUIC
as a preparation for one of the QUIC next steps to come: fully support QUIC
protocol for haproxy servers.
Implement ->accept_conn() callback for QUIC listener sockets.
Note that this patch also implements quic_session_accept() function
which is similar to session_accept_fd() without calling conn_complete_session()
at this time because we do not have any real QUIC mux.
Makes TLS/TCP and QUIC share the same CTX initializer so that not to modify the
caller which is an XPRT callback used both by the QUIC xprt and the SSL xprt over
TCP.
This patch adds QUIC structs to server struct so that to make the QUIC code
compile. Also initializes the ebtree to store the connections by connection
IDs.
This patch adds a quic_transport_params struct to bind_conf struct
used for the listeners. This is to store the QUIC transport parameters
for the listeners. Also initializes them when calling str2listener().
Before str2sa_range() it's too early to figure we're going to speak QUIC,
and after it's too late as listeners are already created. So it seems that
doing it in str2listener() when the protocol is discovered is the best
place.
Also adds two ebtrees to the underlying receivers to store the connection
by connections IDs (one for the original connection IDs, and another
one for the definitive connection IDs which really identify the connections.
However it doesn't seem normal that it is stored in the receiver nor the
listener. There should be a private context in the listener so that
protocols can store internal information. This element should in
fact be the listener handle.
Something still feels wrong, and probably we'll have to make QUIC and
SSL co-exist: a proof of this is that there's some explicit code in
bind_parse_ssl() to prevent the "ssl" keyword from replacing the xprt.
This patch imports all the C files for QUIC protocol implementation with few
modifications from 20200720-quic branch of quic-dev repository found at
https://github.com/haproxytech/quic-dev.
Traces were implemented to help with the development.
This patch imports all the definitions for QUIC protocol with few modifications
from 20200720-quic branch of quic-dev repository found at
https://github.com/haproxytech/quic-dev.
When parsing "ssl" keyword for TLS bindings, we must not use the same xprt as the one
for TLS/TCP connections. So, do not modify the QUIC xprt which will be initialized
when parsing QUIC addresses wich "ssl" bindings.
