IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Released version 2.8-dev9 with the following main changes :
- MINOR: quic: Move traces at proto level
- BUG/MINOR: quic: Possible memory leak from TX packets
- BUG/MINOR: quic: Possible leak during probing retransmissions
- BUG/MINOR: quic: Useless probing retransmission in draining or killing state
- BUG/MINOR: quic: Useless I/O handler task wakeups (draining, killing state)
- CLEANUP: quic: rename frame types with an explicit prefix
- CLEANUP: quic: rename frame variables
- CLEANUP: quic: Remove useless parameters passes to qc_purge_tx_buf()
- CLEANUP: quic: Rename <buf> variable to <token> in quic_generate_retry_token()
- CLEANUP: quic: Rename <buf> variable into quic_padding_check()
- CLEANUP: quic: Rename <buf> variable into quic_rx_pkt_parse()
- CLEANUP: quic: Rename <buf> variable for several low level functions
- CLEANUP: quic: Make qc_build_pkt() be more readable
- CLEANUP: quic: Rename quic_get_dgram_dcid() <buf> variable
- CLEANUP: quic: Rename several <buf> variables at low level
- CLEANUP: quic: Rename <buf> variable into quic_packet_read_long_header()
- CLEANUP: quic: Rename <buf> variable into qc_parse_hd_form()
- CLEANUP: quic: Rename several <buf> variables into quic_sock.c
- DEBUG: crash using an invalid opcode on x86/x86_64 instead of an invalid access
- DEBUG: crash using an invalid opcode on aarch64 instead of an invalid access
- DEV: h2: add a script "mkhdr" to build h2 frames from scratch
- DEV: h2: support reading frame payload from a file
- MINOR: acme.sh: add the deploy script for acme.sh in admin directory
- BUG/MEDIUM: mux-quic: do not emit RESET_STREAM for unknown length
- BUG/MEDIUM: mux-quic: improve streams fairness to prevent early timeout
- BUG/MINOR: quic: prevent buggy memcpy for empty STREAM
- MINOR: mux-quic: do not set buffer for empty STREAM frame
- MINOR: mux-quic: do not allocate Tx buf for empty STREAM frame
- MINOR: quic: finalize affinity change as soon as possible
- BUG/MINOR: quic: fix race on quic_conns list during affinity rebind
- CI: switch to Fastly CDN to download LibreSSL
- BUILD: ssl: switch LibreSSL to Fastly CDN
- BUG/MINOR: clock: fix a few occurrences of 'now' being used in place of 'date'
- BUG/MINOR: spoe: use "date" not "now" in debug messages
- BUG/MINOR: activity: show wall-clock date, not internal date in show activity
- BUG/MINOR: opentracing: use 'date' instead of 'now' in debug output
- Revert "BUG/MINOR: clock: fix a few occurrences of 'now' being used in place of 'date'"
- BUG/MINOR: calltrace: fix 'now' being used in place of 'date'
- BUG/MINOR: trace: show wall-clock date, not internal date in show activity
- BUG/MINOR: hlua: return wall-clock date, not internal date in core.now()
- BUG/MEDIUM: spoe: Don't start new applet if there are enough idle ones
- BUG/MINOR: stconn: Fix SC flags with same value
- BUG/MINOR: resolvers: Use sc_need_room() to wait more room when dumping stats
- BUG/MEDIUM: tcpcheck: Don't eval custom expect rule on an empty buffer
- BUG/MINOR: stats: report the correct start date in "show info"
- MINOR: time: add conversions to/from nanosecond timestamps
- MINOR: time: replace calls to tv_ms_elapsed() with a linear subtract
- MINOR: spoe: switch the timeval-based timestamps to nanosecond timestamps
- MEDIUM: tree-wide: replace timeval with nanoseconds in tv_accept and tv_request
- MINOR: stats: use nanoseconds, not timeval to compute uptime
- MINOR: activity: use nanoseconds, not timeval to compute uptime
- MINOR: checks: use a nanosecond counters instead of timeval for checks->start
- MINOR: clock: do not use now.tv_sec anymore
- MEDIUM: clock: replace timeval "now" with integer "now_ns"
- MINOR: clock: replace the timeval start_time with start_time_ns
- MINOR: sample: Add bc_rtt and bc_rttvar
- MINOR: quic: use real sending rate measurement
- MINOR: proxy: factorize send rate measurement
Before this patch, global sending rate was measured on the QUIC lower
layer just after sendto(). This meant that all QUIC frames were
accounted for, including non STREAM frames and also retransmission.
To have a better reflection of the application data transferred, move
the incrementation into the MUX layer. This allows to account only for
STREAM frames payload on their first emission.
This should be backported up to 2.6.
Now that "now" is no more a timeval, there's no point keeping a copy
of it as a timeval, let's also switch start_time to nanoseconds, it
simplifies operations.
This puts an end to the occasional confusion between the "now" date
that is internal, monotonic and not synchronized with the system's
date, and "date" which is the system's date and not necessarily
monotonic. Variable "now" was removed and replaced with a 64-bit
integer "now_ns" which is a counter of nanoseconds. It wraps every
585 years, so if all goes well (i.e. if humanity does not need
haproxy anymore in 500 years), it will just never wrap. This implies
that now_ns is never nul and that the zero value can reliably be used
as "not set yet" for a timestamp if needed. This will also simplify
date checks where it becomes possible again to do "date1<date2".
All occurrences of "tv_to_ns(&now)" were simply replaced by "now_ns".
Due to the intricacies between now, global_now and now_offset, all 3
had to be turned to nanoseconds at once. It's not a problem since all
of them were solely used in 3 functions in clock.c, but they make the
patch look bigger than it really is.
The clock_update_local_date() and clock_update_global_date() functions
are now much simpler as there's no need anymore to perform conversions
nor to round the timeval up or down.
The wrapping continues to happen by presetting the internal offset in
the short future so that the 32-bit now_ms continues to wrap 20 seconds
after boot.
The start_time used to calculate uptime can still be turned to
nanoseconds now. One interrogation concerns global_now_ms which is used
only for the freq counters. It's unclear whether there's more value in
using two variables that need to be synchronized sequentially like today
or to just use global_now_ns divided by 1 million. Both approaches will
work equally well on modern systems, the difference might come from
smaller ones. Better not change anyhting for now.
One benefit of the new approach is that we now have an internal date
with a resolution of the nanosecond and the precision of the microsecond,
which can be useful to extend some measurements given that timestamps
also have this resolution.
Instead we're using ns_to_sec(tv_to_ns(&now)) which allows the tv_sec
part to disappear. At this point, "now" is only used as a timeval in
clock.c where it is updated.
Let's get rid of timeval in storage of internal timestamps so that they
are no longer mistaken for wall clock time. These were exclusively used
subtracted from each other or to/from "now" after being converted to ns,
so this patch removes the tv_to_ns() conversion to use them natively. Two
occurrences of tv_isge() were turned to a regular wrapping subtract.
Instead of operating on {sec, usec} now we convert both operands to
ns then subtract them and convert to ms. This is a first step towards
dropping timeval from these timestamps.
Interestingly, tv_ms_elapsed() and tv_ms_remain() are no longer used at
all and could be removed.
In order to ease the transition away from the timeval used in internal
timestamps, let's first create a few functions and macro to return a
counter from a timeval and conversely, as well as ease the conversions
to/from ns/us/ms/sec to save the user from having to count zeroes and
to think about appending ULL in conversions.
The "show info" help for "Start_time_sec" says "Start time in seconds"
so it's definitely the start date in human format, not the internal one
that is solely used to compute uptime. Since commit 28360dc ("MEDIUM:
clock: force internal time to wrap early after boot"), both are split
apart since the start time takes into account the offset needed to cause
the early wraparound, so we must only use start_date here.
No backport is needed.
The commit a664aa6a6 ("BUG/MINOR: tcpcheck: Be able to expect an empty
response") instroduced a regression for expect rules relying on a custom
function. Indeed, there is no check on the buffer to be sure it is not empty
before calling the custom function. But some of these functions expect to
have data and don't perform any test on the buffer emptiness.
So instead of fixing all custom functions, we just don't eval them if the
buffer is empty.
This patch must be backported but only if the commit above was backported
first.
It was a cut/paste typo during stream-interface to conn-stream
refactoring. sc_have_room() was used instead of sc_need_room().
This patch must be backported as far as 2.6.
SC_FL_SND_NEVERWAIT and SC_FL_SND_EXP_MORE flags have the same value. It is
not critical because these flags are only used to know if MSG_MORE flag must
be set on a send().
No backport needed.
It is possible to start too many applets on sporadic burst of events after
an inactivity period. It is due to the way we estimate if a new applet must
be created or not. It is based on a frequency counter. We compare the events
processing rate against the number of events currently processed (in
progress or waiting to be processed). But we should also take care of the
number of idle applets.
We already track the number of idle applets, but it is global and not
per-thread. Thus we now also track the number of idle applets per-thread. It
is not a big deal because this fills a hole in the spoe_agent structure.
Thanks to this counter, we can refrain applets creation if there is enough
idle applets to handle currently processed events.
This patch should be backported to every stable versions.
That's hopefully the last one affected by this. It was a bit trickier
because there's the promise in the doc that the date is monotonous, so
we continue to use now-start_time as the uptime value and add it to
start_date to get the current date. It was also emphasized by commit
28360dc ("MEDIUM: clock: force internal time to wrap early after boot"),
causing core.now() to return a date of Mar 20 on Apr 27. No backport is
needed.
Yet another case where "now" was used instead of "date" for a publicly
visible date that was already incorrect and became worse after commit
28360dc ("MEDIUM: clock: force internal time to wrap early after boot").
No backport is needed.
Since commit 28360dc ("MEDIUM: clock: force internal time to wrap early
after boot") we have a much clearer distinction between 'now' (the internal,
drifting clock) and 'date' (the wall clock time). The calltrace code was
using "now" instead of "date" since the value is displayed to humans.
No backport is needed.
This reverts commit aadcfc9ea6dce6ba800568067a45b879c8c5039e.
The parts affecting the DeviceAtlas addon were wrong actually, the
"now" variable was a local time_t in a file that's not compiled with
the haproxy binary (dadwsch). Only the fix to the calltrace is correct,
so better revert and fix the only one in a separate commit. No backport
is needed.
The filter was using "now" in visible output in debug mode, that's
not correct, we should rather use "date" since it's visible. No
backport is needed as it was mostly emphasized by commit 28360dc
("MEDIUM: clock: force internal time to wrap early after boot")
in 2.8..
Another case where "now" was used instead of "date" for a publicly visible
date that was already incorrect and became worse after commit 28360dc
("MEDIUM: clock: force internal time to wrap early after boot"). No
backport is needed.
The debug messages were still emitted with a date taken from "now" instead
of "date", which was not correct a long time ago but which became worse in
2.8 since commit 28360dc ("MEDIUM: clock: force internal time to wrap early
after boot"). Let's fix it. No backport is needed.
Since commit 28360dc ("MEDIUM: clock: force internal time to wrap early
after boot") we have a much clearer distinction between 'now' (the internal,
drifting clock) and 'date' (the wall clock time). There were still a few
places where 'now' was being used for human consumption.
No backport is needed.
Each quic_conn are attached in a global thread-local quic_conns list
used for "show quic" command. During thread rebinding, a connection is
detached from its local list instance and moved to its new thread list.
However this operation is not thread-safe and may cause a race
condition.
To fix this, only remove the connection from its list inside
qc_set_tid_affinity(). The connection is inserted only after in
qc_finalize_affinity_rebind() on the new thread instance thus prevented
a race condition. One impact of this is that a connection will be
invisible during rebinding for "show quic".
A connection must not transition to closing state in between this two
steps or else cleanup via quic_handle_stopping() may not miss it. To
ensure this, this patch relies on the previous commit :
commit d6646dddccb1aae08f60717b5b6743c513c37299
MINOR: quic: finalize affinity change as soon as possible
This should be backported up to 2.7.
During accept, a quic-conn is rebind to a new thread. This process is
done in two times :
* first on the original thread via qc_set_tid_affinity()
* then on the newly assigned thread via qc_finalize_affinity_rebind()
Most quic_conn operations (I/O tasklet, task and quic_conn FD socket
read) are reactivated ony after the second step. However, there is a
possibility that datagrams are handled before it via quic_dgram_parse()
when using listener sockets. This does not seem to cause any issue but
this may cause unexpected behavior in the future.
To simplify this, qc_finalize_affinity_rebind() will be called both by
qc_xprt_start() and quic_dgram_parse(). Only one invocation will be
performed thanks to the new flag QUIC_FL_CONN_AFFINITY_CHANGED.
This should be backported up to 2.7.
Sometimes it may be necessary to send an empty STREAM frame to signal
clean stream closure with FIN bit set. Prior to this change, a Tx buffer
was allocated unconditionnally even if no data is transferred.
Most of the times, allocation was not performed due to an older buffer
reused. But if data were already acknowledge, a new buffer is allocated.
No memory leak occurs as the buffer is properly released when the empty
frame acknowledge is received. But this allocation is unnecessary and it
consumes a connexion Tx buffer for nothing.
Improve this by skipping buffer allocation if no data to transfer.
qcs_build_stream_frm() is now able to deal with a NULL out argument.
This should be backported up to 2.6.
Previous patch fixes an issue occurring with empty STREAM frames without
payload. The crash was hidden in part because buf/data fields of
qf_stream were set even if no payload is referenced. This was not the
true cause of the crash but to ease future debugging, a STREAM frame
built with no payload now has its buf and data fields set to NULL.
This should be backported up to 2.6.
Sometimes it may be necessary to send empty STREAM frames with only the
FIN bit set. For these frames, memcpy is thus unnecessary as their
payload is empty. However, we did not prevent its invocation inside
quic_build_stream_frame().
Normally, memcpy invocation with length==0 is safe. However, there is an
extra condition in our function to handle data wrapping. For an empty
STREAM frame in the context of MUX emission, this is safe as the frame
points to a valid buffer which causes the wrapping condition to be false
and resulting in a memcpy with 0 length.
However, in the context of retransmission, this may lead to a crash.
Consider the following scenario : two STREAM frames A and B are
produced, one with payload and one empty with FIN set, pointing to the
same stream_desc buffer. If A is acknowledged by the peer, its buffer is
released as no more data is left in it. If B needs to be resent, the
wrapping condition will be messed up to a reuse of a freed buffer. Most
of the times, <wrap> will be a negative number, which results in a
memcpy invocation causing a buffer overflow.
To fix this, simply add an extra condition to skip memcpy and wrapping
check if STREAM frame length is null inside quic_build_stream_frame().
This crash is pretty rare as it relies on a lot of conditions difficult
to reproduce. It seems to be the cause for the latest crashes reported
under github issue #2120. In all the inspected dumps, the segfault
occurred during retransmission with an empty STREAM frame being used as
input. Thanks again to Tristan from Mangadex for his help and
investigation on it.
This should be backported up to 2.6.
Since the following mentioned patch, a send-list mechanism was
implemented to improve streams priorization on sending.
commit 20f2a425ffeda2e623aac4c702f4e44b1e122d1d
MAJOR: mux-quic: rework stream sending priorization
This is done to prevent the same streams to always be used as first ones
on emission. However there is still a flaw on the algorithm. Once put in
the send-list, a streams is not removed until it has sent all of its
content. When a stream transfers a large object, it will remain in the
send-list during all the transfer and will soon monopolize the first
place. the stream does never leave its position until the transfer is
finished and will monopolize the first place. Other streams behind won't
have the opportunity to advance on their own transfers due to a Tx
buffer exhaustion.
This situation is especially problematic if a small timeout client is
used. As some streams won't advance on their transfer for a long period
of time, they will be aborted due to a stream layer timeout client
causing a RESET_STREAM emission.
To fix this, during sending each stream with at least some bytes
transferred from its tx.buf to qc_stream_desc out buffer is put at the
end of the send-list. This ensures that on the next iteration streams
that cannot transfer anything will be used in priority.
This patch improves significantly h2load benchmarks for large objects
with several streams opened in parallel on a single connection. Without
it, errors may be reported by h2load for aborted streams. For example,
this improved the following scenario on a 10mbit/s link with a 10s
timeout client :
$ ./build/bin/h2load --npn-list h3 -t 1 -c 1 -m 30 -n 30 https://198.18.10.11:20443/?s=500k
This fix may help with the github issue #2004 where chrome browser stop
to use QUIC after receiving RESET_STREAM frames.
This should be backported up to 2.7.
Some HTX responses may not always contain a EOM block. For example this
is the case if content-length header is missing from the HTTP server
response. Stream termination is thus signaled to QUIC mux via shutw
callback. However, this is interpreted inconditionnally as an early
close by the mux with a RESET_STREAM emission. Most of the times, QUIC
clients report this as an error.
To fix this, check if htx.extra is set to HTX_UNKOWN_PAYLOAD_LENGTH for
a qcs instance. If true, shutw will never be used to emit a
RESET_STREAM. Instead, the stream will be closed properly with a FIN
STREAM frame. If all data were already transfered, an empty STREAM frame
is sent.
This fix may help with the github issue #2004 where chrome browser stop
to use QUIC after receiving RESET_STREAM frames.
This issue was reported by Vladimir Zakharychev. Thanks to him for his
help and testing. It was also reproduced locally using httpterm with the
query string "/?s=1k&b=0&C=1".
This should be backported up to 2.7.
Now we can build a series of data frames by reading from a file and
chunking it into frames of requested length. It's mostly useful for
data frames (e.g. post). One way to announce these upfront is to
capture the output of curl use without content-length:
$ nc -lp4446 > post-h2-nocl.bin
$ curl -v --http2-prior-knowledge http://127.0.0.1:4446/url -H "content-length:" -d @/dev/null
Then just change the 5th byte from the end from 1 to 0 to remove the
end-of-stream bit, it will allow to chain a file, then to send an
empty DATA frame with ES set :
$ (dev/h2/mkhdr.sh -i 1 -t data -d CHANGELOG;
dev/h2/mkhdr.sh -i 1 -t data -l 0 -f es) > h2-data-changelog.bin
Then post that to the server:
$ cat post-h2-nocl.bin h2-data-changelog.bin | nc 0 4446
On aarch64 there's also a guaranted invalid instruction, called UDF, and
which even supports an optional 16-bit immediate operand:
https://developer.arm.com/documentation/ddi0596/2021-12/Base-Instructions/UDF--Permanently-Undefined-?lang=en
It's conveniently encoded as 4 zeroes (when the operand is zero). It's
unclear when support for it was added into GAS, if at all; even a
not-so-old 2.27 doesn't know about it. Let's byte-encode it.
Tested on an A72 and works as expected.
BUG_ON() calls currently trigger a segfault. This is more convenient
than abort() as it doesn't rely on any function call nor signal handler
and never causes non-unwindable stacks when opening cores. But it adds
quite some confusion in bug reports which are rightfully tagged "segv"
and do not instantly allow to distinguish real segv (e.g. null derefs)
from code asserts.
Some CPU architectures offer various crashing methods. On x86 we have
INT3 (0xCC), which stops into the debugger, and UD0/UD1/UD2. INT3 looks
appealing but for whatever reason (maybe signal handling somewhere) it
loses the last call point in the stack, making backtraces unusable. UD2
has the merit of being only 2 bytes and causing an invalid instruction,
which almost never happens normally, so it's easily distinguishable.
Here it was defined as a macro so that the line number in the core
matches the one where the BUG_ON() macro is called, and the debugger
shows the last frame exactly at its calligg point.
E.g. when calling "debug dev bug":
Program terminated with signal SIGILL, Illegal instruction.
#0 debug_parse_cli_bug (args=<optimized out>, payload=<optimized out>, appctx=<optimized out>, private=<optimized out>) at src/debug.c:408
408 BUG_ON(one > zero);
[Current thread is 1 (Thread 0x7f7a660cc1c0 (LWP 14238))]
(gdb) bt
#0 debug_parse_cli_bug (args=<optimized out>, payload=<optimized out>, appctx=<optimized out>, private=<optimized out>) at src/debug.c:408
#1 debug_parse_cli_bug (args=<optimized out>, payload=<optimized out>, appctx=<optimized out>, private=<optimized out>) at src/debug.c:402
#2 0x000000000061a69f in cli_parse_request (appctx=appctx@entry=0x181c0160) at src/cli.c:832
#3 0x000000000061af86 in cli_io_handler (appctx=0x181c0160) at src/cli.c:1035
#4 0x00000000006ca2f2 in task_run_applet (t=0x181c0290, context=0x181c0160, state=<optimized out>) at src/applet.c:449
Make quic_stateless_reset_token_cpy(), quic_derive_cid() and quic_get_cid_tid()
be more readable: there is no struct buffer variable manipulated by these
functions.
Should be backported to 2.7.
There is no <buf> variable passed to this function.
Also rename <buf_end> to <end> to mimic others functions.
Rename <beg> to <first_byte> and <end> to <last_byte>.
Should be backported to 2.7.
Make quic_build_packet_long_header(), quic_build_packet_short_header() and
quic_apply_header_protection() be more readable: there is no struct buffer
variables used by these functions.
Should be backported to 2.7.
