IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In register_name, before locking the var_names array, we check the variable name
validity. So if we try to register an invalid or empty name, we need to return
without unlocking it (because it was never locked).
This patch must be backported in 1.8.
This avoids possible 100% cpu usage deadlock on a EMAIL_ALERTS_LOCK and
avoids sending lots of emails when 'option log-health-checks' is used.
It is avoided to change the server state and possibly queue a new email
while processing the email alert by setting check->status to
HCHK_STATUS_UNKNOWN which will exit the set_server_check_status(..) early.
This needs to be backported to 1.8.
Commit 4cfede87a313456fcbce7a185312460b4e1d05b7 removed
`exit-on-failure` in favor of `no-exit-on-failure`, but failed
to update references to the former in user facing messages.
This should be backported to haproxy 1.8.
Commit 9470d2c ("BUG/MINOR: h2: try to abort closed streams as
soon as possible") tried to address the situations where a stream
is closed by the client, but caused a side effect which is that in
some cases, a regularly closed stream reports an error to the stream
layer. The reason is that we purposely matched H2_SS_CLOSED in the
test for H2_SS_ERROR to report this so that we can check for RST,
but it accidently catches certain end of transfers as well. This
results in valid requests to report flags "CD" in the logs.
Instead, let's roll back to detecting H2_SS_ERROR and explicitly check
for a received RST. This way we can correctly abort transfers without
mistakenly reporting errors in normal situations.
This fix needs to be backported to 1.8 as the fix above was merged into
1.8.1.
Since peers were ported to an applet in 1.5, an issue appeared which
is that certain attempts to close an outgoing connection are a bit
"too nice". Specifically, protocol errors and stream timeouts result
in a clean shutdown to be sent, waiting for the other side to confirm.
This is particularly problematic in the case of timeouts since by
definition the other side will not confirm as it has disappeared.
As found by Fred, this issue was further emphasized in 1.8 by commit
f9ce57e ("MEDIUM: connection: make conn_sock_shutw() aware of
lingering") which causes clean shutdowns not to be sent if the fd is
marked as linger_risk, because now even a clean timeout will not be
sent on an idle peers session, and the other one will have nothing
to respond to.
The solution here is to set NOLINGER on the outgoing stream interface
to ensure we always close whenever we attempt a simple shutdown.
However it is important to keep in mind that this also underlines
some weaknesses of the shutr/shutw processing inside process_stream()
and that all this part needs to be reworked to clearly consider the
abort case, and to stop the confusion between linger_risk and NOLINGER.
This fix needs to be backported as far as 1.5 (all versions are affected).
However, during testing of the backport it was found that 1.5 never tries
to close the peers connection on timeout, so it suffers for another issue.
The new admin state was not correctly commited in this case.
Checks were fully disabled but the server was not marked in MAINT state.
It results with a server definitely stucked on the DOWN state.
This patch should be backported on haproxy 1.8
The number of async fd is computed considering the maxconn, the number
of sides using ssl and the number of engines using async mode.
This patch should be backported on haproxy 1.8
There's a nasty case related to signaling all processes via SIGUSR1.
Since the master process still holds the peers sockets, the old process
trying to connect to the new one to teach it its tables has a risk to
connect to the master instead, which will not do anything, causing the
old process to hang instead of quitting.
This patch ensures we correctly close the peers in the master process
on startup, just like it is done for proxies. Ultimately we would rather
have a complete list of listeners to avoid such issues. But that's a bit
trickier as it would require using unbind_all() and avoiding side effects
the master could cause to other processes (like unlinking unix sockets).
To be backported to 1.8.
Since the split of the shctx and the ssl cache, we lost the ability to
disable the cache with tune.ssl.cachesize 0.
Worst than that, when using this configuration, haproxy segfaults during
the configuration parsing.
Must be backported to 1.8.
In hpack_dht_make_room(), we try to fulfill this rule form RFC7541#4.4 :
"It is not an error to attempt to add an entry that is larger than the
maximum size; an attempt to add an entry larger than the maximum size
causes the table to be emptied of all existing entries and results in
an empty table."
Unfortunately it is not consistent with the way it's used in
hpack_dht_insert() as this last one will consider a success as a
confirmation it can copy the header into the table, and a failure as
an indexing error. This results in the two following issues :
- if a client sends too large a header into an empty table, this
header may overflow the table. Fortunately, most clients send
small headers like :authority first, and never mark headers that
don't fit into the table as indexable since it is counter-productive ;
- if a client sends too large a header into a populated table, the
operation fails after the table is totally flushed and the request
is not processed.
This patch fixes the two issues at once :
- a header not fitting into an empty table is always a sign that it
will never fit ;
- not fitting into the table is not an error
Thanks to Yves Lafon for reporting detailed traces demonstrating this
issue. This fix must be backported to 1.8.
This is a regression in the commit 29730ba5 ("MINOR: action: Add a functions to
check http capture rules"). We must check the capture id only when an id is
defined.
This patch must be backported in 1.8.
This is explicitly forbidden by 7540#8.1.2, and may be used to bypass
some of the other filters, so they must be blocked early. It removes
another issue reported by h2spec.
To backport to 1.8.
h2spec rightfully outlines that we used not to reject these ones, and
they may cause trouble if presented, especially "upgrade".
Must be backported to 1.8.
At the moment there's only ":status". Let's block it early when parsing
the request. Otherwise it would be blocked by the HTTP/1 code anyway.
This silences another h2spec issue.
To backport to 1.8.
We currently don't use stream dependencies, but as reported by h2spec,
the spec requires that we reject streams that depend on themselves in
HEADERS frames.
To backport to 1.8.
h2spec reports that we unfortunately didn't enforce the per-connection
stream limit that we advertise. It's important to ensure it's never
crossed otherwise it's cheap for a client to create many streams. This
requires the addition of a stream count. The h2c struct could be cleaned
up a bit, just like the h2_detach() function where an "if" block doesn't
make sense anymore since it's always true.
To backport to 1.8.
As reported by h2spec, the h2->h1 gateway doesn't verify that ":path"
is not empty. This is harmless since the H1 parser will reject such a
request, but better fix it anyway.
To backport to 1.8.
The purpose here is to be able to signal receipt of RST_STREAM to
streams when they start to provide a response so that the response
can be aborted ASAP. Given that RST_STREAM immediately switches the
stream to the CLOSED state, we must check for CLOSED in addition to
the existing ERROR check.
To be backported to 1.8.
The h2spec test suite reveals that a GOAWAY frame received after the
last stream doesn't cause an immediate close, because we count on the
last stream to quit to do so. By simply setting the last_sid to the
received value in case it was not set, we can ensure to properly close
an idle connection during h2_wake().
To be backported to 1.8.
Due to a typo in the request maximum length calculation, we count the
request path twice instead of counting it added to the method's length.
This has two effects, the first one being that a path cannot be larger
than half a buffer, and the second being that the method's length isn't
properly checked. Due to the way the temporary buffers are used internally,
it is quite difficult to meet this condition. In practice, the only
situation where this can cause a problem is when exactly one of either
the method or the path are compressed and the other ones is sent as a
literal.
Thanks to Yves Lafon for providing useful traces exhibiting this issue.
To be backported to 1.8.
h2spec reports that we used to support a dynamic table size update
anywhere in the header block but it's only allowed before other
headers (cf RFC7541#4.2.1). In practice we don't use these for now
since we only use literals in responses.
To backport to 1.8.
If the hpack decoder sees an invalid header index, it emits value
"### ERR ###" that was used during debugging instead of rejecting the
block. This is harmless, and was detected by h2spec.
To backport to 1.8.
h2spec reported that we didn't check that no more than 7 bits of padding
were left after decoding an huffman-encoded literal. This is harmless but
better fix it now.
To backport to 1.8.
When a pseudo header is used, name.ptr is NULL and we must replace it
with hpack_idx_to_name(). This only affects code built with DEBUG_HPACK.
To be backported to 1.8.
In connect_conn_chk(), there were one case we could return with a new
conn_stream created, but no mux attached. With no mux, cs_destroy() would
segfault. Fix that by setting the mux before we can fail.
This should be backported to 1.8.
The first thread requesting a synchronization is responsible to write in the
"sync" pipe to notify all others. But we must write only once in the pipe
between two synchronizations to have exactly one character in the pipe. It is
important because we only read 1 character in return when the last thread exits
from the sync-point.
Here there is a bug. If two threads request a synchronization, only the first
writes in the pipe. But, if the same thread requests several times a
synchronization before entering in the sync-point (because, for instance, it
detects many servers down), it writes as many as characters in the pipe. And
only one of them will be read. Repeating this bug many times will block HAProxy
on the write because the pipe is full.
To fix the bug, we just check if the current thread has already requested a
synchronization before trying to notify all others.
The patch must be backported in 1.8
As with the call to cpuset_setaffinity(), FreeBSD expects the argument to
pthread_setaffinity_np() to be a cpuset_t, not an unsigned long, so the call
was silently failing.
This should probably be backported to 1.8.
This allows a calling script to show the first startup output and
know when to stop reading from stdout so haproxy can daemonize.
To be backpored to 1.8.
Check if master-worker pipe getenv succeeded, also allow pipe fd 0 as
valid. On FreeBSD in quiet mode the stdin/stdout/stderr are closed
which lets the mworker_pipe to use fd 0 and fd 1. Additionally exit()
upon failure to create or get the master-worker pipe.
This needs to be backported to 1.8.
"monitor-uri" may rely on "monitor fail" rules, which are processed
very early, immediately after the HTTP request is parsed and before
any http rulesets. It's not reported by the config parser when this
ruleset is misplaces, causing some configurations not to work like
users would expect. Let's just add the warning for a misplaced rule.
This BUG was introduced with:
'MEDIUM: threads/stick-tables: handle multithreads on stick tables'
The API was reviewed to handle stick table entry updates
asynchronously and the caller must now call a 'stkable_touch_*'
function each time the content of an entry is modified to
register the entry to be synced.
There was missing call to stktable_touch_* resulting in
not propagated entries to remote peers (or local one during reload)
Yves Lafon reported a breakage with 100-continue. In fact the problem
is caused when an 1xx is the last response in the buffer (which commonly
is the case). We loop back immediately into the parser with what remains
of the input buffer (ie: nothing), while it is not expected to be called
with an empty response, so it fails.
Let's simply get back to the caller to decide whether or not more data
are expected to be sent.
This fix needs to be backported to 1.8.
Commit 8d8aa0d ("MEDIUM: threads/listeners: Make listeners thread-safe")
mistakenly placed HA_ATOMIC_ADD(job, 1) to replace a job--, so it maintains
the job count too high preventing the process from cleanly exiting on
reload.
This needs to be backported to 1.8.
Commit 3e13cba ("MEDIUM: session: make use of the connection's destroy
callback") ensured that connections could be autonomous to destroy the
session they initiated, but it didn't take care of doing the same for
applets. Such applets are used for peers, Lua and SPOE outgoing
connections. In this case, once the stream ends, it closes everything
and nothing takes care of releasing the session. The problem is not
immediately obvious since the only visible effect is that older
processes will not quit on reload after having leaked one such session.
For now we check in stream_free() if the session's origin is the applet
we're releasing, and then free the session as well. Something more
uniform should probably be done once we manage to unify applets and
connections a bit more.
This fix needs to be backported to 1.8. Thanks to Emmanuel Hocdet for
reporting the problem.
server.h needs checks.h since it references the struct check, but depending
on the include order it will fail if check.h is included first due to this
one including server.h in turn while it doesn't need it.
The cache was not setting the hdrs_len to zero when we are called
in the http_forward_data with headers + body.
The consequence is to always try to store a size - the size of headers,
during the calls to http_forward_data even when it has already forwarded
the headers.
Thanks to Cyril Bont for reporting this bug.
Must be backported to 1.8.
The shctx_init() function does not check anymore if the pointer is not
NULL, this check must be done is the caller.
The consequence was to allocate one shctx per ssl bind.
Bug introduced by 4f45bb9 ("MEDIUM: shctx: separate ssl and shctx")
Thanks to Maciej Zdeb for reporting this bug.
Must be backported to 1.8.
