iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/configs/exynos_defconfig

388 lines
8.9 KiB
Plaintext
Raw Normal View History

ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_SYSVIPC=y
ARM: configs: replace CONFIG_NO_HZ=y with CONFIG_NO_HZ_IDLE=y According to https://www.kernel.org/doc/html/latest/timers/no_hz.html, CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer kernels, so let's reflect that in the 32-bit ARM defconfigs. Signed-off-by: Stefan Hansson <newbie13xd@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-25 18:20:35 +02:00
CONFIG_NO_HZ_IDLE=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_HIGH_RES_TIMERS=y
ARM: exynos_defconfig: Trim and reorganize with savedefconfig Trim and reorganize the defconfig with savedefconfig on latest linux-next. The ARCH_EXYNOS3 is removed because it become the default. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-29 19:36:20 +02:00
CONFIG_PREEMPT=y
ARM: exynos_defconfig: Enable Control Groups support systemd needs control groups support to be enabled in the kernel so let's enable it by default since is quite likely that a user-space with systemd will be used. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 02:42:52 +09:00
CONFIG_CGROUPS=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_BLK_DEV_INITRD=y
ARM: exynos_defconfig: Enable missing drivers for supported Exynos boards Enable following drivers for recently merged devices: - perf events and ARM PMU (Performance Measurement Unit) driver for all Exynos boards - CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI - Sii9234 DRM HDMI-MHL bridge for Trats2 - dedicated Odroid ASoC machine driver for Odroid XU3/XU4 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-30 10:10:03 +01:00
CONFIG_PERF_EVENTS=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_ARCH_EXYNOS=y
ARM: 8864/1: Add workaround for I-Cache line size mismatch between CPU cores Some big.LITTLE systems have I-Cache line size mismatch between LITTLE and big cores. This patch adds a workaround for proper I-Cache support on such systems. Without it, some class of the userspace code (typically self-modifying) might suffer from random SIGILL failures. Similar workaround already exists for ARM64 architecture. I has been added by commit 116c81f427ff ("arm64: Work around systems with mismatched cache line sizes"). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-05-28 09:38:14 +01:00
CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_SMP=y
ARM: exynos_defconfig: Enable SCHED_MC and ENERGY_MODEL The Energy Model (EM) is needed to run Energy Aware Scheduler (EAS). Enable ENERGY_MODEL to make that happen. This will increase energy efficiency of the big.LITTLE platforms (e.g. Exynos5422) by smarter decisions in scheduling tasks in non-heavy workloads. Add SCHED_MC in order to create another level in scheduling domains: 'MC'. This improves scheduler's decisions on platforms with CPU clusters, such as big.LITTLE. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-02-20 09:56:36 +00:00
CONFIG_SCHED_MC=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_BIG_LITTLE=y
ARM: exynos_defconfig: increase CONFIG_NR_CPUS value to 8 Current CONFIG_NR_CPUS value (2) is too small for: - EXYNOS4412 (4 cores) - EXYNOS5440 (4 cores) - EXYNOS5410 (8 cores) - EXYNOS5420 (8 cores) Set CONFIG_NR_CPUS to 8 so it is correct for all currently supported SoCs. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-02 07:33:38 +09:00
CONFIG_NR_CPUS=8
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_HIGHMEM=y
ARM: exynos_defconfig: Enable SECCOMP Systemd already supports seccomp. It seems some distros are building systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors: systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-08-12 14:34:02 +02:00
CONFIG_SECCOMP=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_CPU_FREQ=y
cpufreq: Remove CONFIG_CPU_FREQ_STAT_DETAILS config option This doesn't have any benefit apart from saving a small amount of memory when it is disabled. The ifdef hackery in the code makes it dirty unnecessarily. Clean it up by removing the Kconfig option completely. Few defconfigs are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-05 13:57:41 +05:30
CONFIG_CPU_FREQ_STAT=y
ARM: exynos_defconfig: Enable cpufreq-dt driver With the latest patches the cpufreq-dt can be used on multiple Exynos SoCs: 3250, 4210, 4212, 4412 and 5250. Enable it along with default ondemand governor to conserve the energy, reduce temperature while maintaining acceptable performance. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-08-12 07:47:17 +09:00
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
ARM: exynos_defconfig: Enable CPUFreq governors as modules Currently only the ondemand and performance CPUFreq policy governors are enabled in the Exynos defconfig. But the other governors are also useful for some cases, enable them to allow users change the default if needed. The options are enabled as module to keep the kernel image size minimal. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-08 15:02:09 -04:00
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module The schedutil CPUFreq governor could be built as a module but the change "cpufreq / sched: Pass flags to cpufreq_update_util()" made it non-modular so attempting to enable as module leads to a warning: warning: symbol value 'm' invalid for CPU_FREQ_GOV_SCHEDUTIL Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-08-19 11:43:12 -04:00
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
ARM: exynos_defconfig: Enable cpufreq-dt driver With the latest patches the cpufreq-dt can be used on multiple Exynos SoCs: 3250, 4210, 4212, 4412 and 5250. Enable it along with default ondemand governor to conserve the energy, reduce temperature while maintaining acceptable performance. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-08-12 07:47:17 +09:00
CONFIG_CPUFREQ_DT=y
ARM: exynos_defconfig: Enable CPU idle Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top Running) mode on Exynos 4210 (coupled), Exynos 4x12 and Exynos 5250. Enable it in default configuration to reduce energy consumption. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-03-18 00:43:43 +09:00
CONFIG_CPU_IDLE=y
CONFIG_ARM_EXYNOS_CPUIDLE=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_VFP=y
CONFIG_NEON=y
ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats Enable the kernel NEON mode and asm/NEON accelerated crypto algorithms which should bring performance benefits on Exynos SoCs. Enable these as modules because they are optional, not essential anyhow for platform booting nor related directly to Exynos Soc. All accelerated algorithms pass booting self-tests on Odroid XU4 (Exynos5422) and Trats2 (Exynos4412). Additionally enable cpufreq statistics as they are useful for debugging. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-01-04 10:33:24 +09:00
CONFIG_KERNEL_MODE_NEON=y
ARM: exynos_defconfig: Enable PM_DEBUG PM_DEBUG and PM_ADVANCED_DEBUG bring some information useful for development and they should not cause any significant overhead. Enable them in default configuration so debugging would be slightly easier. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Kukjin Kim <kgene@kernel.org>
2016-07-19 13:09:14 +02:00
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_ENERGY_MODEL=y
ARM: exynos_defconfig: Bring back explicitly wanted options Few options KALLSYMS_ALL, SCSI, PM_DEVFREQ and mutex/spinlock debugging were removed with savedefconfig because they were selected by other options. However these are user-visible options and they might not be selected in the future. Exactly this happened with commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removing the dependency between DEBUG_FS and TRACING. To avoid losing these options in the future, explicitly mention them in defconfig. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-12-05 21:00:06 +01:00
CONFIG_KALLSYMS_ALL=y
ARM: exynos_defconfig: Trim and reorganize with savedefconfig Trim and reorganize the defconfig with savedefconfig on latest linux-next. The ARCH_EXYNOS3 is removed because it become the default. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-29 19:36:20 +02:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_CMA=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
ARM: exynos_defconfig: Enable IP multicast Prior to Nikolay's commit dcd87999d, libnss-mdns (eg. to resolve "foo.local" on the LAN using mDNS) worked without CONFIG_IP_MULTICAST defined, but dcd87999d caused it to stop working without having CONFIG_IP_MULTICAST defined explicitly. Since exynos_defconfig did not previously define CONFIG_IP_MULTICAST, mDNS used to work for users building with just exynos_defconfig, but stopped working from dcd87999d. Define CONFIG_IP_MULTICAST explicitly in exynos_defconfig as it appears essential anyway. Signed-off-by: Robie Basak <robie@justgohome.co.uk> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-12-19 00:56:37 +00:00
CONFIG_IP_MULTICAST=y
ARM: exynos_defconfig: Enable options to mount a rootfs via NFS This patch enables the options to mount a rootfs over NFS and also support for automatic configuration of IP addresses during boot as needed by NFS. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-03-27 01:50:16 +09:00
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
ARM: exynos_defconfig: Enable Bluetooth, mac80211, NFC and more USB drivers Enable useful, but not essential, stacks and drivers as modules: - Bluetooth, - mac80211, - NFC, - some USB network adapters, - USB storage, - additional USB devices (printers etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com>
2017-06-21 21:16:56 +02:00
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_LEDS=y
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_INTEL=y
ARM: exynos_defconfig: Enable serial bus and BCM HCIUART drivers Enable serial bus and BCM HCIUART Bluetooth drivers available on the Exynos3250-based Rinato board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-03-26 09:35:24 +01:00
CONFIG_BT_HCIUART_BCM=y
ARM: exynos_defconfig: Enable Bluetooth, mac80211, NFC and more USB drivers Enable useful, but not essential, stacks and drivers as modules: - Bluetooth, - mac80211, - NFC, - some USB network adapters, - USB storage, - additional USB devices (printers etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com>
2017-06-21 21:16:56 +02:00
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
ARM: exynos_defconfig: Compile MAC80211/CFG80211 as modules MAC80211/CFG80211 framework requires loading regulatory.db from /lib/firmware directory, so it makes very little sense to have it built-in. Change it to be built as modules to let it properly load the needed firmware/db files. As a side effect of this change, the size of the compressed modules on SquashFS increased significantly from 27MiB to 38MiB, so increase the size of BLK_DEV_RAM to allow the modules to fit into it. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-03-26 10:46:26 +01:00
CONFIG_CFG80211=m
CONFIG_MAC80211=m
ARM: exynos_defconfig: Enable Bluetooth, mac80211, NFC and more USB drivers Enable useful, but not essential, stacks and drivers as modules: - Bluetooth, - mac80211, - NFC, - some USB network adapters, - USB storage, - additional USB devices (printers etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com>
2017-06-21 21:16:56 +02:00
CONFIG_MAC80211_LEDS=y
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_SPI=m
CONFIG_NFC_NCI_UART=m
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y
CONFIG_NFC_S3FWRN5_I2C=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_BLK_DEV_LOOP=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_BLK_DEV_CRYPTOLOOP=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_BLK_DEV_RAM=y
ARM: exynos_defconfig: Compile MAC80211/CFG80211 as modules MAC80211/CFG80211 framework requires loading regulatory.db from /lib/firmware directory, so it makes very little sense to have it built-in. Change it to be built as modules to let it properly load the needed firmware/db files. As a side effect of this change, the size of the compressed modules on SquashFS increased significantly from 27MiB to 38MiB, so increase the size of BLK_DEV_RAM to allow the modules to fit into it. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-03-26 10:46:26 +01:00
CONFIG_BLK_DEV_RAM_SIZE=65536
ARM: exynos_defconfig: Bring back explicitly wanted options Few options KALLSYMS_ALL, SCSI, PM_DEVFREQ and mutex/spinlock debugging were removed with savedefconfig because they were selected by other options. However these are user-visible options and they might not be selected in the future. Exactly this happened with commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removing the dependency between DEBUG_FS and TRACING. To avoid losing these options in the future, explicitly mention them in defconfig. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-12-05 21:00:06 +01:00
CONFIG_SCSI=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
ARM: exynos_defconfig: Enable AHCI-platform SATA driver Exynos5250-based Arndale board has one eSATA port, so enable AHCI-platform driver, which handles it. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-02 12:18:22 +02:00
CONFIG_ATA=y
# CONFIG_SATA_PMP is not set
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_ATA_SFF is not set
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MD=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_NETDEVICES=y
ARM: defconfig: Enable ax88796c driver for Exynos boards Enable ax88796c driver for the Ethernet chip on Exynos3250-based ARTIK5 boards in exynos and multi_v7 defconfigs. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201103151536.26472-6-l.stelmach@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-03 16:15:36 +01:00
CONFIG_NET_VENDOR_ASIX=y
CONFIG_SPI_AX88796C=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_SMSC911X=y
ARM: exynos_defconfig: Enable Bluetooth, mac80211, NFC and more USB drivers Enable useful, but not essential, stacks and drivers as modules: - Bluetooth, - mac80211, - NFC, - some USB network adapters, - USB storage, - additional USB devices (printers etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com>
2017-06-21 21:16:56 +02:00
CONFIG_USB_RTL8150=m
ARM: exynos_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4 Odroid-XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over USB 3.0. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-05 09:00:28 +00:00
CONFIG_USB_RTL8152=y
ARM: exynos_defconfig: Enable Bluetooth, mac80211, NFC and more USB drivers Enable useful, but not essential, stacks and drivers as modules: - Bluetooth, - mac80211, - NFC, - some USB network adapters, - USB storage, - additional USB devices (printers etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com>
2017-06-21 21:16:56 +02:00
CONFIG_USB_LAN78XX=m
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
ARM: exynos_defconfig: Add more drivers for GalaxyS3/Trats2 Enable drivers for S5K6A3 and S5C73M3 camera sensors, AAT1290 flash LED, Midas-TouchKey and BRCMFMAC SDIO-WIFI modules used on Samsung Galaxy S3 and Trats2 boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-02-26 11:57:10 +01:00
CONFIG_BRCMFMAC=m
ARM: exynos_defconfig: Enable WiFi-Ex as a module instead built-in The Marvell WiFi-Ex driver tries to load a firmware on probe. So if the driver is built-in and probed before a firmware is available, this is not loaded and the chip does not work. This happens for example if an initramfs isn't used since the driver is probed before the root filesystem is mounted. Change the default config since the driver isn't needed for machines to boot and is more convenient to have it enabled as a module to avoid requiring an initramfs or to have the firmware built into the kernel. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-29 14:42:26 +02:00
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_INPUT_EVDEV=y
ARM: exynos_defconfig: Enable GPIO buttons and RTC drivers Many of the boards use GPIO-mapped buttons for generic input. For Arndale board, these buttons also serve as wakeup source. And the issues reported in commit 522ccdb6fd0e ("ARM: dts: Disable the RTC by default on exynos5") are no longer reproduced on EXYNOS5250 based systems. Hence it would be better to re-enable RTC support for EXYNOS5250. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [mturquette@linaro.org: ack on RTC enabling] Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19 00:35:01 +09:00
CONFIG_KEYBOARD_GPIO=y
ARM: defconfig: samsung: Re-order entries to match savedefconfig Re-order entries just like savedefconfig would do so it will be easier to review the changes before actual savedefconfig. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-06-08 16:41:36 +02:00
CONFIG_KEYBOARD_SAMSUNG=y
ARM: exynos_defconfig: Add more drivers for GalaxyS3/Trats2 Enable drivers for S5K6A3 and S5C73M3 camera sensors, AAT1290 flash LED, Midas-TouchKey and BRCMFMAC SDIO-WIFI modules used on Samsung Galaxy S3 and Trats2 boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-02-26 11:57:10 +01:00
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_KEYBOARD_CROS_EC=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_CYAPA=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_INPUT_TOUCHSCREEN=y
ARM: exynos_defconfig: compile Atmel MXT touchscreeen as module The Atmel MXT touchscreen can load firmware and settings from the /lib/firmware directory, it makes sense to have it as a module to have more control over the loading process. Signed-off-by: Martin Jücker <martin.juecker@gmail.com> Link: https://lore.kernel.org/r/20201113212525.13455-5-martin.juecker@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-13 22:25:25 +01:00
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
ARM: exynos_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has Asahi Kasei AK 3-Axis Magnetometer, CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-04 16:43:50 +09:00
CONFIG_TOUCHSCREEN_MMS114=y
ARM: exynos_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Functional Device present on Trats and Origen boards by toggling on drivers: charger, haptic motor, LED, RTC and extcon. This allows to test and usage of these boards with exynos config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:05 +09:00
CONFIG_INPUT_MISC=y
ARM: exynos_defconfig: Enable Maxim 77693 LED and haptic drivers Enable support for: 1. Haptic motor driver on Trats2 board (Maxim 77693) and Note 4 (Maxim 77843); 2. LED driver on Trats2 board (Maxim 77693). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:06 +09:00
CONFIG_INPUT_MAX77693_HAPTIC=y
ARM: exynos_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Functional Device present on Trats and Origen boards by toggling on drivers: charger, haptic motor, LED, RTC and extcon. This allows to test and usage of these boards with exynos config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:05 +09:00
CONFIG_INPUT_MAX8997_HAPTIC=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_SERIAL_8250=y
ARM: exynos_defconfig: Save defconfig on current linux-next Save defconfig on next-20160602. Most of changes are just re-ordering of symbols. Removed symbols: - FHANDLE (default y), - THERMAL, EXYNOS_THERMAL (selected by ARCH_EXYNOS), - CHROME_PLATFORMS (selected by MFD_CROS_EC), - EXT4_FS (selected by EXT3_FS) - SND_SOC_ODROIDX2 (obsolete since commit ee12a817bb4b ("ASoC: samsung: Remove unused Odroid x2/u3 machine driver"), replaced with SND_SIMPLE_CARD). Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:16 +02:00
CONFIG_SERIAL_OF_PLATFORM=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
ARM: exynos_defconfig: Enable serial bus and BCM HCIUART drivers Enable serial bus and BCM HCIUART Bluetooth drivers available on the Exynos3250-based Rinato board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-03-26 09:35:24 +01:00
CONFIG_SERIAL_DEV_BUS=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_HW_RANDOM=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C_INFINEON=y
ARM: exynos_defconfig: Enable MAX77802 Enabled MAX77802 pmic for exynos systems. One config USB_ANNOUNCE_NEW_DEVICES to display device information on connect. Another config for I2C_CHARDEV to see i2c device nodes. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 02:42:40 +09:00
CONFIG_I2C_CHARDEV=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers The Exynos System-on-Chips have ~7 distinctive I2C IO ports (exact number depends on chip). However some integrated circuits on board, also using I2C protocol for communication, can be connected to the SoC by other GPIO. Enabling the I2C GPIO driver allows using such additional integrated circuits. An example of such chip using I2C and connected over GPIO to SoC is Maxim 77693 MUIC on Trats2 board. The regulator driver of Maxim 77693 offers charger and safeout LDO (necessary for USB OTG). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 03:19:29 +09:00
CONFIG_I2C_GPIO=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SPI=y
ARM: exynos_defconfig: Add drivers for Exynos4210 Universal C210 board This patch enables drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-19 12:52:15 +01:00
CONFIG_SPI_GPIO=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_SPI_S3C64XX=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_DEBUG_GPIO=y
ARM: exynos_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has Asahi Kasei AK 3-Axis Magnetometer, CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-04 16:43:50 +09:00
CONFIG_GPIO_WM8994=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_POWER_SUPPLY=y
ARM: exynos_defconfig: Enable SBS battery support Many Exynos5 boards (e.g: Snow, Peach Pit and Pi) have a SBS-compliant gas gauge battery. Enable to built it so the needed support is available for these boards. Suggested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-08-18 11:25:51 -05:00
CONFIG_BATTERY_SBS=y
ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2 Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, extcon, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, extcon, fuel gauge (max17042), used on: Trats2, This allows full usage of charging stack on these devices along with extcon connector. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:49:55 +09:00
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_MAX77693=y
ARM: exynos_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Functional Device present on Trats and Origen boards by toggling on drivers: charger, haptic motor, LED, RTC and extcon. This allows to test and usage of these boards with exynos config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:05 +09:00
CONFIG_CHARGER_MAX8997=y
ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers Add RTC and charger drivers for MAX8998 chip used on Samsung UniversalC210 board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-04 10:22:58 +01:00
CONFIG_CHARGER_MAX8998=y
ARM: defconfig: add SMB347 charger driver for p4note The Summit SMB347 charger is part of the P4Note family of devices (e.g. Samsung Galaxy Note 10.1 (GT-N8010/N8013), enable the driver in exynos and multi_v7 defconfigs. Signed-off-by: Martin Jücker <martin.juecker@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/4f1f6a4f8200855d07f3faed80ec5cc320e40941.1643919230.git.martin.juecker@gmail.com Link: https://lore.kernel.org/r/20220316154309.436028-3-krzysztof.kozlowski@canonical.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-16 16:43:09 +01:00
CONFIG_CHARGER_SMB347=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_CHARGER_TPS65090=y
ARM: exynos_defconfig: Enable LM90 driver multi_v7_defconfig has it as Y already, so build it in here, too, for consistency, and therefore build in HWMON as well. Signed-off-by: Andreas Faerber <afaerber@suse.de> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2014-11-22 23:31:30 +09:00
CONFIG_SENSORS_LM90=y
ARM: exynos_defconfig: Enable NTC Thermistors support The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have IIO based ADC thermistors. Enable built-in support for its driver. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-07-15 18:32:45 +02:00
CONFIG_SENSORS_NTC_THERMISTOR=y
ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for Odroid-XU3 Enable CONFIG_SENSORS_PWM_FAN on exynos_defconfig to control fan power on Odroid-XU3. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-13 14:32:05 +09:30
CONFIG_SENSORS_PWM_FAN=y
ARM: exynos_defconfig: Enable CONFIG_SENSORS_INA2XX for Odroid-XU3 Odroid-XU3 board support power monitor sensor. Below is the output of boot log. [ 3.241438] ina2xx 0-0040: power monitor ina231 (Rshunt = 10000 uOhm) [ 3.248068] ina2xx 0-0041: power monitor ina231 (Rshunt = 10000 uOhm) [ 3.254724] ina2xx 0-0044: power monitor ina231 (Rshunt = 10000 uOhm) [ 3.261354] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm) ina231-i2c-0-40 Adapter: s3c2410-i2c in0: +0.00 V in1: +1.01 V power1: 175.00 mW curr1: +0.18 A ina231-i2c-0-41 Adapter: s3c2410-i2c in0: +0.00 V in1: +1.21 V power1: 50.00 mW curr1: +0.04 A ina231-i2c-0-44 Adapter: s3c2410-i2c in0: +0.00 V in1: +1.02 V power1: 50.00 mW curr1: +0.04 A ina231-i2c-0-45 Adapter: s3c2410-i2c in0: +0.00 V in1: +1.04 V power1: 75.00 mW curr1: +0.07 A Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-13 14:32:06 +09:30
CONFIG_SENSORS_INA2XX=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_CPU_THERMAL=y
ARM: exynos_defconfig: Enable devfreq thermal integration Panfrost driver provides a devfreq driver for the Mali GPU and allows to scale GPU core frequency. Enable support for devfreq thermal integration to enable cooling of GPU thermal zone by reducing GPU core frequency. This fixes following warning during boot on Exynos5422-based Odroid XU4: panfrost 11800000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-01-17 13:34:47 +01:00
CONFIG_DEVFREQ_THERMAL=y
ARM: exynos_defconfig: Enable thermal emulation for Exynos TMU Enabling thermal emulation on Exynos SoCs. New sysfs attribute - emul_temp is created. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 23:54:01 +09:00
CONFIG_THERMAL_EMULATION=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
arm/arm64: defconfig: Update configs to use the new CROS_EC options We refactored the CrOS EC drivers moving part of the code from the MFD subsystem to the platform chrome subsystem. During this change we needed to rename some config options, so, update the defconfigs accordingly. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-05 12:10:47 +01:00
CONFIG_MFD_CROS_EC_DEV=y
ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2 Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, extcon, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, extcon, fuel gauge (max17042), used on: Trats2, This allows full usage of charging stack on these devices along with extcon connector. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:49:55 +09:00
CONFIG_MFD_MAX14577=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MFD_MAX77686=y
ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers The Exynos System-on-Chips have ~7 distinctive I2C IO ports (exact number depends on chip). However some integrated circuits on board, also using I2C protocol for communication, can be connected to the SoC by other GPIO. Enabling the I2C GPIO driver allows using such additional integrated circuits. An example of such chip using I2C and connected over GPIO to SoC is Maxim 77693 MUIC on Trats2 board. The regulator driver of Maxim 77693 offers charger and safeout LDO (necessary for USB OTG). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 03:19:29 +09:00
CONFIG_MFD_MAX77693=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MFD_MAX8997=y
ARM: exynos_defconfig: Add drivers for Exynos4210 Universal C210 board This patch enables drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-19 12:52:15 +01:00
CONFIG_MFD_MAX8998=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MFD_SEC_CORE=y
ARM: defconfig: add STMPE ADC driver for P4 Note Enable the STMPE ADC driver for the P4 Note device family in exynos and multi_v7 defconfigs. Signed-off-by: Martin Jücker <martin.juecker@gmail.com> Link: https://lore.kernel.org/r/20201113212525.13455-4-martin.juecker@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-13 22:25:24 +01:00
CONFIG_MFD_STMPE=y
CONFIG_STMPE_I2C=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_MFD_TPS65090=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2 Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, extcon, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, extcon, fuel gauge (max17042), used on: Trats2, This allows full usage of charging stack on these devices along with extcon connector. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:49:55 +09:00
CONFIG_REGULATOR_MAX14577=y
ARM: exynos_defconfig: Add MAX8952 regulator driver Add regulator driver for MAX8952 PMIC chip used on Samsung UniversalC210 board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-07 11:09:49 +01:00
CONFIG_REGULATOR_MAX8952=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_REGULATOR_MAX8997=y
ARM: exynos_defconfig: Add drivers for Exynos4210 Universal C210 board This patch enables drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-19 12:52:15 +01:00
CONFIG_REGULATOR_MAX8998=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_REGULATOR_MAX77686=y
ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers The Exynos System-on-Chips have ~7 distinctive I2C IO ports (exact number depends on chip). However some integrated circuits on board, also using I2C protocol for communication, can be connected to the SoC by other GPIO. Enabling the I2C GPIO driver allows using such additional integrated circuits. An example of such chip using I2C and connected over GPIO to SoC is Maxim 77693 MUIC on Trats2 board. The regulator driver of Maxim 77693 offers charger and safeout LDO (necessary for USB OTG). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 03:19:29 +09:00
CONFIG_REGULATOR_MAX77693=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_REGULATOR_MAX77802=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_REGULATOR_S2MPA01=y
Linux 3.13-rc5 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.15 (GNU/Linux) iQEcBAABAgAGBQJSt1TYAAoJEHm+PkMAQRiGvWgH/iWg8TmEWz4KUKuHthuUi0uh 9+2YDN+4k577Xa0obaG24giQeqkCdxMr3oJrS3FO9jeAmaNRHEGhxUPneisb7RtN 9jIVsz5bPa9/DcK9nqtaUQdvA0O5AWTE6AAPmwleTVy+8CygBo987T2uGELnQCSR FrKCrMePc7Pj0uthMVXrpJ17Ffm/j7jkfRtPhrxHJyngh3jEux+tPbpynH/aKuO2 47unsSQimoFk7n2SPFvNu3E/vZE2xVbu5SH9MCl5yyiCifFjpi3B71LV/FW51lvm cK8Jzn2BmYDygRFjnZfq4zJHqYJCBHzpjCLWmR37Dm/JS91aGq3+Cg0stDP8UTs= =+Hcn -----END PGP SIGNATURE----- Merge tag 'v3.13-rc5' into next/boards Need a newer base version to get a regulator fix for Samsung platforms that they enable building in a defconfig. Linux 3.13-rc5
2013-12-28 21:37:03 -08:00
CONFIG_REGULATOR_S2MPS11=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_REGULATOR_S5M8767=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_REGULATOR_TPS65090=y
ARM: exynos_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has Asahi Kasei AK 3-Axis Magnetometer, CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-04 16:43:50 +09:00
CONFIG_REGULATOR_WM8994=y
ARM: exynos_defconfig: enable platform media drivers Commit 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers") introduced a dependency of all platform media drivers on the new CONFIG_MEDIA_PLATFORM_SUPPORT symbol, so add it also to exynos_defconfig. While touching this part, update the media related configs to the current layout. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-08-07 12:21:03 +02:00
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_SAMSUNG_S5P=m
ARM: exynos_defconfig: Enable USB Video Class support The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a built-in Silicon Motion USB UVC WebCam. Enable support for the USB Video Class driver and its needed media Kconfig symbols so the camera is supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-17 07:57:43 +09:00
CONFIG_MEDIA_SUPPORT=m
ARM: exynos_defconfig: enable platform media drivers Commit 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers") introduced a dependency of all platform media drivers on the new CONFIG_MEDIA_PLATFORM_SUPPORT symbol, so add it also to exynos_defconfig. While touching this part, update the media related configs to the current layout. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-08-07 12:21:03 +02:00
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
ARM: exynos_defconfig: Enable USB Video Class support The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a built-in Silicon Motion USB UVC WebCam. Enable support for the USB Video Class driver and its needed media Kconfig symbols so the camera is supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-17 07:57:43 +09:00
CONFIG_MEDIA_CAMERA_SUPPORT=y
ARM: exynos_defconfig: Enable Samsung media platform drivers as modules There are a bunch of media platform drivers under drivers/media/platform/ that are for Samsung SoCs but are not being built with exynos_defconfig. This patch enables them as a module to improve build coverage for these drivers and also to allow people use them with proper hardware if modules are installed. The S5P MFC driver wasn't enabled since it fails to probe. Only the boolean Kconfig symbols are enabled as built-in, since drivers are not critical and also to keep the kernel binary image size as small as possible. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-28 09:29:39 -04:00
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
ARM: exynos_defconfig: enable platform media drivers Commit 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers") introduced a dependency of all platform media drivers on the new CONFIG_MEDIA_PLATFORM_SUPPORT symbol, so add it also to exynos_defconfig. While touching this part, update the media related configs to the current layout. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-08-07 12:21:03 +02:00
CONFIG_MEDIA_PLATFORM_SUPPORT=y
ARM: exynos_defconfig: Enable USB Video Class support The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a built-in Silicon Motion USB UVC WebCam. Enable support for the USB Video Class driver and its needed media Kconfig symbols so the camera is supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-17 07:57:43 +09:00
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
ARM: exynos_defconfig: Enable Samsung media platform drivers as modules There are a bunch of media platform drivers under drivers/media/platform/ that are for Samsung SoCs but are not being built with exynos_defconfig. This patch enables them as a module to improve build coverage for these drivers and also to allow people use them with proper hardware if modules are installed. The S5P MFC driver wasn't enabled since it fails to probe. Only the boolean Kconfig symbols are enabled as built-in, since drivers are not critical and also to keep the kernel binary image size as small as possible. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-28 09:29:39 -04:00
CONFIG_V4L_PLATFORM_DRIVERS=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
ARM: exynos_defconfig: Enable Samsung media platform drivers as modules There are a bunch of media platform drivers under drivers/media/platform/ that are for Samsung SoCs but are not being built with exynos_defconfig. This patch enables them as a module to improve build coverage for these drivers and also to allow people use them with proper hardware if modules are installed. The S5P MFC driver wasn't enabled since it fails to probe. Only the boolean Kconfig symbols are enabled as built-in, since drivers are not critical and also to keep the kernel binary image size as small as possible. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-28 09:29:39 -04:00
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
CONFIG_VIDEO_S5P_FIMC=m
CONFIG_VIDEO_S5P_MIPI_CSIS=m
CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
ARM: exynos_defconfig: Enable MFC driver as module Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that can be used to {en,de}code video streams by hardware. Enable support for its driver as a module so the MFC can be tested. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-10 17:07:27 -04:00
CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
ARM: exynos_defconfig: Enable vivid driver as a module The Virtual Video Test Driver can be used to emulate video capture and output devices so it's very useful for testing. Since is not necessary to boot, can be enabled as module to avoid increasing the kernel size. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-06-24 09:10:12 -04:00
CONFIG_V4L_TEST_DRIVERS=y
ARM: defconfig: samsung: Re-order entries to match savedefconfig Re-order entries just like savedefconfig would do so it will be easier to review the changes before actual savedefconfig. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-06-08 16:41:36 +02:00
CONFIG_VIDEO_VIVID=m
ARM: exynos_defconfig: Add more drivers for GalaxyS3/Trats2 Enable drivers for S5K6A3 and S5C73M3 camera sensors, AAT1290 flash LED, Midas-TouchKey and BRCMFMAC SDIO-WIFI modules used on Samsung Galaxy S3 and Trats2 boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-02-26 11:57:10 +01:00
CONFIG_VIDEO_S5C73M3=m
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_VIDEO_S5K6A3=m
ARM: exynos_defconfig: Enable options for display panel support Many Exynos devices have a display panel. Most of them just have a simple panel while others have more complex configurations that requires an embedded DisplayPort (eDP) to LVDS bridges. This patch enables the following features to be built in the kernel image to support both setups: - Direct Rendering Manager (DRM) - DRM bridge registration and lookup framework - Parade ps8622/ps8625 eDP/LVDS bridge - NXP ptn3460 eDP/LVDS bridge - Exynos Fully Interactive Mobile Display controller (FIMD) - Panel registration and lookup framework - Simple panels - Backlight & LCD device support Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-09 01:11:10 +09:00
CONFIG_DRM=y
CONFIG_DRM_EXYNOS=y
CONFIG_DRM_EXYNOS_FIMD=y
ARM: exynos_defconfig: enable Exynos DRM Mixer driver Mixer driver is selected by CONFIG_DRM_EXYNOS_HDMI option. Since Exynos5433 HDMI does not require Mixer. There will be separate options to select Mixer and HDMI. Adding new option to defconfig before Kconfig will allow to keep bisectability. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 13:03:41 +01:00
CONFIG_DRM_EXYNOS_MIXER=y
ARM: exynos_defconfig: Add drivers for Exynos4210 Universal C210 board This patch enables drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-19 12:52:15 +01:00
CONFIG_DRM_EXYNOS_DPI=y
ARM: exynos_defconfig: Save defconfig on current linux-next Save defconfig on next-20160602. Most of changes are just re-ordering of symbols. Removed symbols: - FHANDLE (default y), - THERMAL, EXYNOS_THERMAL (selected by ARCH_EXYNOS), - CHROME_PLATFORMS (selected by MFD_CROS_EC), - EXT4_FS (selected by EXT3_FS) - SND_SOC_ODROIDX2 (obsolete since commit ee12a817bb4b ("ASoC: samsung: Remove unused Odroid x2/u3 machine driver"), replaced with SND_SIMPLE_CARD). Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:16 +02:00
CONFIG_DRM_EXYNOS_DSI=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_DRM_EXYNOS_HDMI=y
ARM: exynos_defconfig: Enable options for display panel support Many Exynos devices have a display panel. Most of them just have a simple panel while others have more complex configurations that requires an embedded DisplayPort (eDP) to LVDS bridges. This patch enables the following features to be built in the kernel image to support both setups: - Direct Rendering Manager (DRM) - DRM bridge registration and lookup framework - Parade ps8622/ps8625 eDP/LVDS bridge - NXP ptn3460 eDP/LVDS bridge - Exynos Fully Interactive Mobile Display controller (FIMD) - Panel registration and lookup framework - Simple panels - Backlight & LCD device support Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-09 01:11:10 +09:00
CONFIG_DRM_PANEL_SIMPLE=y
ARM: configs: Everyone who had PANEL_SIMPLE now gets PANEL_EDP In the patch ("drm/panel-simple-edp: Split eDP panels out of panel-simple") we will split the PANEL_SIMPLE driver in two. By default let's give everyone who had the old driver enabled the new driver too. If folks want to opt-out of one or the other they always can later. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.5.I02250cd7d4799661b068bcc65849a456ed411734@changeid
2021-09-14 13:21:52 -07:00
CONFIG_DRM_PANEL_EDP=y
ARM: exynos_defconfig: Add drivers for Exynos4210 Universal C210 board This patch enables drivers needed to get Exynos 4210 Universal C210 board working: MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD parallel output and Samsung LD9040 RGB panel. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-19 12:52:15 +01:00
CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
ARM: exynos_defconfig: enable S6E63J0X03 panel driver Add Samsung S6E63J0X03 DSI panel driver to enable support for display panel on Exynos3250-based Samsung Rinato board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-16 12:35:36 +02:00
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
drm/panel: Add Samsung prefix to panel drivers The likelihood of getting a large number of panel drivers from different vendors is quite high. Add a prefix to the two existing Samsung panel drivers to set a guideline for future patch submissions. Using vendor prefixes consistently should allow a cleaner organization of the tree. Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-14 14:57:14 +02:00
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
ARM: exynos_defconfig: Save defconfig on current linux-next Save defconfig on next-20160602. Most of changes are just re-ordering of symbols. Removed symbols: - FHANDLE (default y), - THERMAL, EXYNOS_THERMAL (selected by ARCH_EXYNOS), - CHROME_PLATFORMS (selected by MFD_CROS_EC), - EXT4_FS (selected by EXT3_FS) - SND_SOC_ODROIDX2 (obsolete since commit ee12a817bb4b ("ASoC: samsung: Remove unused Odroid x2/u3 machine driver"), replaced with SND_SIMPLE_CARD). Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-02 07:55:16 +02:00
CONFIG_DRM_NXP_PTN3460=y
CONFIG_DRM_PARADE_PS8622=y
ARM: exynos_defconfig: Enable missing drivers for supported Exynos boards Enable following drivers for recently merged devices: - perf events and ARM PMU (Performance Measurement Unit) driver for all Exynos boards - CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI - Sii9234 DRM HDMI-MHL bridge for Trats2 - dedicated Odroid ASoC machine driver for Odroid XU3/XU4 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-30 10:10:03 +01:00
CONFIG_DRM_SII9234=y
ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver Add DRM bridge driver for TOSHIBA TC358764 chip used in LCD panel for Samsung Exynos5250-based Arndale board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-07 11:09:50 +01:00
CONFIG_DRM_TOSHIBA_TC358764=y
ARM: exynos_defconfig: Enable Panfrost and Lima drivers Enable support for Mali GPU with Panfrost and Lima drivers. Most of Exynos chipsets come with Mali GPUs: 1. Mali 400 (Exynos3250, Exynos4210, Exynos4412), 2. Mali T628 (Exynos542x). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-18 21:07:41 +02:00
CONFIG_DRM_LIMA=y
CONFIG_DRM_PANFROST=y
ARM: exynos_defconfig: restore framebuffer support Commit f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") changed the Kconfig dependencies, so COFNIG_FB is no longer selected in defconfigs. Restore support for it in exynos_defconfig, because most Exynos platforms had graphical console running on framebuffer device emulated on the Exynos DRM drivers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20210611100204.6240-1-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-11 12:02:04 +02:00
CONFIG_FB=y
ARM: exynos_defconfig: Enable options for display panel support Many Exynos devices have a display panel. Most of them just have a simple panel while others have more complex configurations that requires an embedded DisplayPort (eDP) to LVDS bridges. This patch enables the following features to be built in the kernel image to support both setups: - Direct Rendering Manager (DRM) - DRM bridge registration and lookup framework - Parade ps8622/ps8625 eDP/LVDS bridge - NXP ptn3460 eDP/LVDS bridge - Exynos Fully Interactive Mobile Display controller (FIMD) - Panel registration and lookup framework - Simple panels - Backlight & LCD device support Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-09 01:11:10 +09:00
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_PWM=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_LOGO=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_SAMSUNG=y
ARM: exynos_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has Asahi Kasei AK 3-Axis Magnetometer, CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-04 16:43:50 +09:00
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y
CONFIG_SND_SOC_SMDK_WM8994_PCM=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_SND_SOC_SNOW=y
ARM: exynos_defconfig: Enable missing drivers for supported Exynos boards Enable following drivers for recently merged devices: - perf events and ARM PMU (Performance Measurement Unit) driver for all Exynos boards - CEC and S5P CEC driver for all Exynos4 and Exynos5 boards with HDMI - Sii9234 DRM HDMI-MHL bridge for Trats2 - dedicated Odroid ASoC machine driver for Odroid XU3/XU4 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-30 10:10:03 +01:00
CONFIG_SND_SOC_ODROID=y
ARM: exynos_defconfig: Enable Arndale audio driver Enable audio driver for Exynos5250 based Arndale boards to improve testing coverage. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-09-20 15:07:02 +02:00
CONFIG_SND_SOC_ARNDALE=y
ARM: exynos_defconfig: enable sound driver for Midas platform Sound driver for Midas platform (Exnyos4412 SoC based) has been recently merged, so enable it for tests like other sound drivers for Exynos based boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201009134855.4520-1-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-10-09 15:48:55 +02:00
CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811=y
ARM: exynos_defconfig: Enable CONFIG_SND_SOC_ODROIDX2 for Odroid-XU3 Enable CONFIG_SND_SOC_ODROIDX2 and CONFIG_SND_SIMPLE_CARD to enable sound on Odroid-XU3 board using the max98090 audio codec. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-06-09 13:37:59 +09:30
CONFIG_SND_SIMPLE_CARD=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_USB=y
ARM: exynos_defconfig: Enable MAX77802 Enabled MAX77802 pmic for exynos systems. One config USB_ANNOUNCE_NEW_DEVICES to display device information on connect. Another config for I2C_CHARDEV to see i2c device nodes. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 02:42:40 +09:00
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_USB_XHCI_HCD=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_USB_EHCI_HCD=y
ARM: exynos_defconfig: Update EHCI config entry Commit 29824c167bea ("USB: host: Rename ehci-s5p to ehci-exynos") renamed the config entry of EHCI host driver. Similar change needs to be done in exynos_defconfig as well. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-02-16 02:02:33 +09:00
CONFIG_USB_EHCI_EXYNOS=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_EXYNOS=y
ARM: exynos_defconfig: Enable Bluetooth, mac80211, NFC and more USB drivers Enable useful, but not essential, stacks and drivers as modules: - Bluetooth, - mac80211, - NFC, - some USB network adapters, - USB storage, - additional USB devices (printers etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com>
2017-06-21 21:16:56 +02:00
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_USB_STORAGE=y
ARM: exynos_defconfig: Enable Bluetooth, mac80211, NFC and more USB drivers Enable useful, but not essential, stacks and drivers as modules: - Bluetooth, - mac80211, - NFC, - some USB network adapters, - USB storage, - additional USB devices (printers etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com>
2017-06-21 21:16:56 +02:00
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
ARM: exynos_defconfig: Enable UAS support for Odroid HC1 board Odroid HC1 board has built-in JMicron USB to SATA bridge, which supports UAS protocol. Compile-in support for it (instead of enabling it as module) to make sure that all built-in storage devices are available for rootfs. The bridge itself also supports fallback to standard USB Mass Storage protocol, but USB Mass Storage class doesn't bind to it when UAS is compiled as module and modules are not (yet) available. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-10-02 08:39:35 +02:00
CONFIG_USB_UAS=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_USB_DWC3=y
ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadget DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards, so enable DWC2 driver as well as the most common USB Ethernet gadget. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-08-18 11:15:33 +02:00
CONFIG_USB_DWC2=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_USB_HSIC_USB3503=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_USB_GADGET=y
ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadget DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards, so enable DWC2 driver as well as the most common USB Ethernet gadget. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-08-18 11:15:33 +02:00
CONFIG_USB_ETH=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MMC=y
ARM: exynos_defconfig: Use 16 minors per MMC block device 16 minors per MMC block device are required to boot Rinato (Gear 2) board because up to 15 partitions are used. With default 8 minors booting failed with: [ 1.329092] mmcblk0: mmc0:0001 F5X5MA 3.64 GiB [ 1.329448] mmcblk0boot0: mmc0:0001 F5X5MA partition 1 4.00 MiB [ 1.329627] mmcblk0boot1: mmc0:0001 F5X5MA partition 2 4.00 MiB [ 1.329808] mmcblk0rpmb: mmc0:0001 F5X5MA partition 3 512 KiB [ 1.335717] mmcblk0: p1 p2 p3 p4 p5 p6 p7 [ 1.436553] Waiting for root device /dev/mmcblk0p15... while the correct list of partitions on mmcblk0 for Gear 2 is: [ 1.436651] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-19 16:56:19 +09:00
CONFIG_MMC_BLOCK_MINORS=16
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S3C=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_MMC_SDHCI_S3C_DMA=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MMC_DW=y
CONFIG_MMC_DW_EXYNOS=y
ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4 Odroid XU3 family boards come with RGB LEDs. Enabling LEDS_GPIO and LEDS_PWM allows monitoring the board alive state (heartbeat) and MMC/SDcard IO usage. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> [k.kozlowski: Rewritten the commit message] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-03 18:11:50 +00:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
ARM: exynos_defconfig: Enable Maxim 77693 LED and haptic drivers Enable support for: 1. Haptic motor driver on Trats2 board (Maxim 77693) and Note 4 (Maxim 77843); 2. LED driver on Trats2 board (Maxim 77693). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:06 +09:00
CONFIG_LEDS_CLASS_FLASH=y
ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4 Odroid XU3 family boards come with RGB LEDs. Enabling LEDS_GPIO and LEDS_PWM allows monitoring the board alive state (heartbeat) and MMC/SDcard IO usage. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> [k.kozlowski: Rewritten the commit message] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-03 18:11:50 +00:00
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
ARM: exynos_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Functional Device present on Trats and Origen boards by toggling on drivers: charger, haptic motor, LED, RTC and extcon. This allows to test and usage of these boards with exynos config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:05 +09:00
CONFIG_LEDS_MAX8997=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_MAX77693=y
ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4 Odroid XU3 family boards come with RGB LEDs. Enabling LEDS_GPIO and LEDS_PWM allows monitoring the board alive state (heartbeat) and MMC/SDcard IO usage. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> [k.kozlowski: Rewritten the commit message] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-03 18:11:50 +00:00
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
ARM: exynos_defconfig: Enable GPIO buttons and RTC drivers Many of the boards use GPIO-mapped buttons for generic input. For Arndale board, these buttons also serve as wakeup source. And the issues reported in commit 522ccdb6fd0e ("ARM: dts: Disable the RTC by default on exynos5") are no longer reproduced on EXYNOS5250 based systems. Hence it would be better to re-enable RTC support for EXYNOS5250. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [mturquette@linaro.org: ack on RTC enabling] Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19 00:35:01 +09:00
CONFIG_RTC_CLASS=y
ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers Add RTC and charger drivers for MAX8998 chip used on Samsung UniversalC210 board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-04 10:22:58 +01:00
CONFIG_RTC_DRV_MAX8998=y
ARM: exynos_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Functional Device present on Trats and Origen boards by toggling on drivers: charger, haptic motor, LED, RTC and extcon. This allows to test and usage of these boards with exynos config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:05 +09:00
CONFIG_RTC_DRV_MAX8997=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_S5M=y
ARM: exynos_defconfig: Enable GPIO buttons and RTC drivers Many of the boards use GPIO-mapped buttons for generic input. For Arndale board, these buttons also serve as wakeup source. And the issues reported in commit 522ccdb6fd0e ("ARM: dts: Disable the RTC by default on exynos5") are no longer reproduced on EXYNOS5250 based systems. Hence it would be better to re-enable RTC support for EXYNOS5250. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [mturquette@linaro.org: ack on RTC enabling] Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19 00:35:01 +09:00
CONFIG_RTC_DRV_S3C=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC=y
ARM: exynos_defconfig: Trim and reorganize with savedefconfig Trim and reorganize the defconfig with savedefconfig on latest linux-next. The ARCH_EXYNOS3 is removed because it become the default. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-29 19:36:20 +02:00
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_SPI=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_COMMON_CLK_MAX77686=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_COMMON_CLK_S2MPS11=y
ARM: exynos_defconfig: Trim and reorganize with savedefconfig Trim and reorganize the defconfig with savedefconfig on latest linux-next. The ARCH_EXYNOS3 is removed because it become the default. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-29 19:36:20 +02:00
CONFIG_EXYNOS_IOMMU=y
ARM: exynos_defconfig: Bring back explicitly wanted options Few options KALLSYMS_ALL, SCSI, PM_DEVFREQ and mutex/spinlock debugging were removed with savedefconfig because they were selected by other options. However these are user-visible options and they might not be selected in the future. Exactly this happened with commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removing the dependency between DEBUG_FS and TRACING. To avoid losing these options in the future, explicitly mention them in defconfig. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-12-05 21:00:06 +01:00
CONFIG_PM_DEVFREQ=y
ARM: exynos_defconfig: Enable bus frequency scaling with devfreq This patch enables the bus frequency scaling driver with devfreq and devfreq-event framework. Devfreq is already supported on Odroid U3/XU3, Trats2 and Rinato/Monk boards. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [k.kozlowski: Don't enable symbols already selected, adjust commit msg] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-07-15 10:33:46 +09:00
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2 Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, extcon, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, extcon, fuel gauge (max17042), used on: Trats2, This allows full usage of charging stack on these devices along with extcon connector. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:49:55 +09:00
CONFIG_EXTCON=y
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX77693=y
ARM: exynos_defconfig: Enable Maxim 8997 family drivers Enable support for Maxim 8997 Multi Functional Device present on Trats and Origen boards by toggling on drivers: charger, haptic motor, LED, RTC and extcon. This allows to test and usage of these boards with exynos config. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-13 10:27:05 +09:00
CONFIG_EXTCON_MAX8997=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_EXYNOS5422_DMC=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
ARM: defconfig: add STMPE ADC driver for P4 Note Enable the STMPE ADC driver for the P4 Note device family in exynos and multi_v7 defconfigs. Signed-off-by: Martin Jücker <martin.juecker@gmail.com> Link: https://lore.kernel.org/r/20201113212525.13455-4-martin.juecker@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-13 22:25:24 +01:00
CONFIG_STMPE_ADC=y
ARM: exynos_defconfig: Enable Trats2 audio codec, touchscreen and sensors The Exynos4412-based Trats2 board has Asahi Kasei AK 3-Axis Magnetometer, CM36651 proximity/ambient light sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to get some testing coverage and use its features. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-04 16:43:50 +09:00
CONFIG_CM36651=y
CONFIG_AK8975=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_PWM=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PHY_EXYNOS5250_SATA=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_EXT2_FS=y
ARM: exynos_defconfig: Enable DYNAMIC_DEBUG and get rid of old ext3 DYNAMIC_DEBUG is quite useful for debugging kernels and should not cause noticeable performance regressions. It makes the kernel bigger (around 4%) but this difference should not impact typical developer and reference usage of this defconfig. Sizes: zImage-old: 4641496 bytes zImage-new: 4811384 bytes text data bss dec hex filename 7031229 2570916 327016 9929161 9781c9 vmlinux-old 7205921 2800052 327016 10332989 9dab3d vmlinux-new Additionally, remove the EXT3_FS symbol because it is entirely replaced by EXT4_FS. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2017-01-30 21:27:49 +02:00
CONFIG_EXT4_FS=y
arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs") promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS within a couple of releases, but five years later this still has not happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs. Get rid of it mechanically: git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' | xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/' Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't regenerated their config file in the last five years will need to just get the new name right when they do. Signed-off-by: Sven Joachim <svenjoac@gmx.de> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-27 22:00:41 +02:00
CONFIG_AUTOFS_FS=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CRAMFS=y
ARM: exynos_defconfig: Enable SquashFS and increase RAM block device size All modules built from exynos_defconfig occupy about 55M, so enable squashfs filesystem support and increase default ram block device size to 32M to enable deploying them on initrd. Such initrd, using squashfs requires at least 24M. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-02-18 08:43:06 +01:00
CONFIG_SQUASHFS=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_ROMFS_FS=y
ARM: exynos_defconfig: Enable options to mount a rootfs via NFS This patch enables the options to mount a rootfs over NFS and also support for automatic configuration of IP addresses during boot as needed by NFS. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-03-27 01:50:16 +09:00
CONFIG_NFS_FS=y
ARM: exynos_defconfig: Enable NFSv4 client NFS client is already enabled (NFS_FS) and by default it enables clients for version 2 and 3. Enable explicitly the version 4 client to utilize the newer protocol. The NFS client is especially useful for testing kernel in automated environments (network boot with network file system). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-11-25 13:09:43 +09:00
CONFIG_NFS_V4=y
ARM: exynos_defconfig: Enable NFS v4.1 and v4.2 NFS is widely used in debugging and Continuous Integration systems, so enable the newest versions of protocol: v4.1 and v4.2. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-01-16 12:44:06 +01:00
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
ARM: exynos_defconfig: Enable options to mount a rootfs via NFS This patch enables the options to mount a rootfs over NFS and also support for automatic configuration of IP addresses during boot as needed by NFS. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-03-27 01:50:16 +09:00
CONFIG_ROOT_NFS=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
ARM: exynos_defconfig: Enable NLS_UTF8 and some crypto algorithms Enable useful, but not essential components: - NLS_UTF8, it might be used for accessing Microsoft-FS based storages, - popular crypto algorithms and transformations as modules. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com>
2017-06-21 21:16:57 +02:00
CONFIG_NLS_UTF8=y
ARM: exynos_defconfig: Enable Exynos RNG and user-space crypto API Enable the new Exynos pseudo random number generator driver and user-space API to access crypto algorithms and devices (not only RNG). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-25 19:26:53 +03:00
CONFIG_CRYPTO_USER=m
ARM: exynos_defconfig: Enable NLS_UTF8 and some crypto algorithms Enable useful, but not essential components: - NLS_UTF8, it might be used for accessing Microsoft-FS based storages, - popular crypto algorithms and transformations as modules. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com>
2017-06-21 21:16:57 +02:00
CONFIG_CRYPTO_TEST=m
ARM: exynos_defconfig: Trim and reorganize with savedefconfig Trim and reorganize the defconfig with savedefconfig on latest linux-next. The ARCH_EXYNOS3 is removed because it become the default. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-29 19:36:20 +02:00
CONFIG_CRYPTO_DH=m
ARM: exynos_defconfig: Enable NLS_UTF8 and some crypto algorithms Enable useful, but not essential components: - NLS_UTF8, it might be used for accessing Microsoft-FS based storages, - popular crypto algorithms and transformations as modules. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com>
2017-06-21 21:16:57 +02:00
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_LZ4=m
ARM: exynos_defconfig: Enable Exynos RNG and user-space crypto API Enable the new Exynos pseudo random number generator driver and user-space API to access crypto algorithms and devices (not only RNG). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-25 19:26:53 +03:00
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
ARM: reorder defconfig files Some Kconfig options have moved around, so adapt the defconfig files accordingly. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-10 18:10:22 +01:00
CONFIG_CRYPTO_SHA1_ARM_NEON=m
CONFIG_CRYPTO_SHA256_ARM=m
CONFIG_CRYPTO_SHA512_ARM=m
CONFIG_CRYPTO_AES_ARM_BS=m
CONFIG_CRYPTO_CHACHA20_NEON=m
ARM: exynos_defconfig: Enable Exynos RNG and user-space crypto API Enable the new Exynos pseudo random number generator driver and user-space API to access crypto algorithms and devices (not only RNG). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-25 19:26:53 +03:00
CONFIG_CRYPTO_DEV_EXYNOS_RNG=y
ARM: exynos_defconfig: Enable s5p-secss driver The Exynos SoC provides a Security SubSystem block for accelerating some cryptographic operations. Enable the driver for it - s5p-secss to utilize the hardware acceleration. Currently the s5p-secss driver supports AES in CBC and ECB modes. However on Odroid XU4 (Exynos5422) and Trats2 (Exynos4412) boards this change introduces one booting error (because of unaligned buffers): alg: skcipher: encryption failed on chunk test 1 for ecb-aes-s5p: ret=22 The cbc-aes-s5p properly registers itself and passes self-tests. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-01-07 10:26:36 +09:00
CONFIG_CRYPTO_DEV_S5P=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_CRC_CCITT=y
ARM: exynos_defconfig: Trim and reorganize with savedefconfig Trim and reorganize the defconfig with savedefconfig on latest linux-next. The ARCH_EXYNOS3 is removed because it become the default. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-29 19:36:20 +02:00
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=96
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_FONTS=y
CONFIG_FONT_7x14=y
ARM: exynos_defconfig: Trim and reorganize with savedefconfig Trim and reorganize the defconfig with savedefconfig on latest linux-next. The ARCH_EXYNOS3 is removed because it become the default. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-29 19:36:20 +02:00
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 14:47:57 +02:00
CONFIG_DEBUG_KERNEL=y
ARM: defconfig: reorder defconfig files The debug-info and can subystem options have moved around in the 'savedefconfig' output, so fix these up to reduce the clutter from the savedefconfig command. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-11 15:56:36 +02:00
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
ARM: exynos_defconfig: Trim and reorganize with savedefconfig Trim and reorganize the defconfig with savedefconfig on latest linux-next. The ARCH_EXYNOS3 is removed because it become the default. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-29 19:36:20 +02:00
CONFIG_MAGIC_SYSRQ=y
ARM: exynos_defconfig: Restore debugfs support Commit 9f532d26c75c ("ARM: exynos_defconfig: Trim and reorganize with savedefconfig") removed explicit enable line for CONFIG_DEBUG_FS, because that feature has been selected by other enabled options: CONFIG_TRACING, which in turn had been selected by CONFIG_PERF_EVENTS and CONFIG_PROVE_LOCKING. In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed the dependency between CONFIG_DEBUG_FS and CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds. Enable it again explicitly, as debugfs support is essential for various automated testing tools. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-12-06 13:47:21 +01:00
CONFIG_DEBUG_FS=y
ARM: exynos_defconfig: Trim and reorganize with savedefconfig Trim and reorganize the defconfig with savedefconfig on latest linux-next. The ARCH_EXYNOS3 is removed because it become the default. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-29 19:36:20 +02:00
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
ARM: exynos_defconfig: Bring back explicitly wanted options Few options KALLSYMS_ALL, SCSI, PM_DEVFREQ and mutex/spinlock debugging were removed with savedefconfig because they were selected by other options. However these are user-visible options and they might not be selected in the future. Exactly this happened with commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removing the dependency between DEBUG_FS and TRACING. To avoid losing these options in the future, explicitly mention them in defconfig. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-12-05 21:00:06 +01:00
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
ARM: exynos_defconfig: Trim and reorganize with savedefconfig Trim and reorganize the defconfig with savedefconfig on latest linux-next. The ARCH_EXYNOS3 is removed because it become the default. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-29 19:36:20 +02:00
CONFIG_DEBUG_USER=y
Reference in New Issue Copy Permalink