linux/arch/arm/boot/dts/exynos5440.dtsi

/*
 * SAMSUNG EXYNOS5440 SoC device tree source
 *
 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <dt-bindings/clock/exynos5440.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>

/ {
	compatible = "samsung,exynos5440", "samsung,exynos5";

	interrupt-parent = <&gic>;
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		serial0 = &serial_0;
		serial1 = &serial_1;
		spi0 = &spi_0;
		tmuctrl0 = &tmuctrl_0;
		tmuctrl1 = &tmuctrl_1;
		tmuctrl2 = &tmuctrl_2;
	};

	clock: clock-controller@160000 {
		compatible = "samsung,exynos5440-clock";
		reg = <0x160000 0x1000>;
		#clock-cells = <1>;
	};

	gic: interrupt-controller@2E0000 {
		compatible = "arm,cortex-a15-gic";
		#interrupt-cells = <3>;
		interrupt-controller;
		reg =	<0x2E1000 0x1000>,
			<0x2E2000 0x1000>,
			<0x2E4000 0x2000>,
			<0x2E6000 0x2000>;
		interrupts = <GIC_PPI 9
				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0>;
		};
		cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <1>;
		};
		cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <2>;
		};
		cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <3>;
		};
	};

	arm-pmu {
		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
	};

	timer {
		compatible = "arm,cortex-a15-timer",
			     "arm,armv7-timer";
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
		clock-frequency = <50000000>;
	};

	cpufreq@160000 {
		compatible = "samsung,exynos5440-cpufreq";
		reg = <0x160000 0x1000>;
		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
		operating-points = <
				/* KHz	  uV */
				1500000 1100000
				1400000 1075000
				1300000 1050000
				1200000 1025000
				1100000 1000000
				1000000 975000
				900000  950000
				800000  925000
		>;
	};

	serial_0: serial@B0000 {
		compatible = "samsung,exynos4210-uart";
		reg = <0xB0000 0x1000>;
		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
		clock-names = "uart", "clk_uart_baud0";
	};

	serial_1: serial@C0000 {
		compatible = "samsung,exynos4210-uart";
		reg = <0xC0000 0x1000>;
		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
		clock-names = "uart", "clk_uart_baud0";
	};

	spi_0: spi@D0000 {
		compatible = "samsung,exynos5440-spi";
		reg = <0xD0000 0x100>;
		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		samsung,spi-src-clk = <0>;
		num-cs = <1>;
		clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
		clock-names = "spi", "spi_busclk0";
	};

	pin_ctrl: pinctrl@E0000 {
		compatible = "samsung,exynos5440-pinctrl";
		reg = <0xE0000 0x1000>;
		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-controller;
		#interrupt-cells = <2>;
		#gpio-cells = <2>;

		fan: fan {
			samsung,exynos5440-pin-function = <1>;
		};

		hdd_led0: hdd_led0 {
			samsung,exynos5440-pin-function = <2>;
		};

		hdd_led1: hdd_led1 {
			samsung,exynos5440-pin-function = <3>;
		};

		uart1: uart1 {
			samsung,exynos5440-pin-function = <4>;
		};
	};

	i2c@F0000 {
		compatible = "samsung,exynos5440-i2c";
		reg = <0xF0000 0x1000>;
		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_B_125>;
		clock-names = "i2c";
	};

	i2c@100000 {
		compatible = "samsung,exynos5440-i2c";
		reg = <0x100000 0x1000>;
		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_B_125>;
		clock-names = "i2c";
	};

	watchdog@110000 {
		compatible = "samsung,s3c2410-wdt";
		reg = <0x110000 0x1000>;
		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clock CLK_B_125>;
		clock-names = "watchdog";
	};

	gmac: ethernet@00230000 {
		compatible = "snps,dwmac-3.70a", "snps,dwmac";
		reg = <0x00230000 0x8000>;
		interrupt-parent = <&gic>;
		interrupts = <GIC_SPI 31 4>;
		interrupt-names = "macirq";
		phy-mode = "sgmii";
		clocks = <&clock CLK_GMAC0>;
		clock-names = "stmmaceth";
	};

	amba {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		interrupt-parent = <&gic>;
		ranges;
	};

	rtc@130000 {
		compatible = "samsung,s3c6410-rtc";
		reg = <0x130000 0x1000>;
		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clock CLK_B_125>;
		clock-names = "rtc";
	};

	tmuctrl_0: tmuctrl@160118 {
		compatible = "samsung,exynos5440-tmu";
		reg = <0x160118 0x230>, <0x160368 0x10>;
		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clock CLK_B_125>;
		clock-names = "tmu_apbif";
		#include "exynos5440-tmu-sensor-conf.dtsi"
	};

	tmuctrl_1: tmuctrl@16011C {
		compatible = "samsung,exynos5440-tmu";
		reg = <0x16011C 0x230>, <0x160368 0x10>;
		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clock CLK_B_125>;
		clock-names = "tmu_apbif";
		#include "exynos5440-tmu-sensor-conf.dtsi"
	};

	tmuctrl_2: tmuctrl@160120 {
		compatible = "samsung,exynos5440-tmu";
		reg = <0x160120 0x230>, <0x160368 0x10>;
		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clock CLK_B_125>;
		clock-names = "tmu_apbif";
		#include "exynos5440-tmu-sensor-conf.dtsi"
	};

	thermal-zones {
		cpu0_thermal: cpu0-thermal {
			thermal-sensors = <&tmuctrl_0>;
			#include "exynos5440-trip-points.dtsi"
		};
		cpu1_thermal: cpu1-thermal {
		       thermal-sensors = <&tmuctrl_1>;
		       #include "exynos5440-trip-points.dtsi"
		};
		cpu2_thermal: cpu2-thermal {
		       thermal-sensors = <&tmuctrl_2>;
		       #include "exynos5440-trip-points.dtsi"
		};
	};

	sata@210000 {
		compatible = "snps,exynos5440-ahci";
		reg = <0x210000 0x10000>;
		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clock CLK_SATA>;
		clock-names = "sata";
	};

	ohci@220000 {
		compatible = "samsung,exynos5440-ohci";
		reg = <0x220000 0x1000>;
		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clock CLK_USB>;
		clock-names = "usbhost";
	};

	ehci@221000 {
		compatible = "samsung,exynos5440-ehci";
		reg = <0x221000 0x1000>;
		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clock CLK_USB>;
		clock-names = "usbhost";
	};

	pcie_0: pcie@290000 {
		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
		reg = <0x290000 0x1000
			0x270000 0x1000
			0x271000 0x40>;
		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
		clock-names = "pcie", "pcie_bus";
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
		#interrupt-cells = <1>;
		interrupt-map-mask = <0 0 0 0>;
		interrupt-map = <0x0 0 &gic 53>;
		num-lanes = <4>;
		status = "disabled";
	};

	pcie_1: pcie@2a0000 {
		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
		reg = <0x2a0000 0x1000
			0x272000 0x1000
			0x271040 0x40>;
		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
		clock-names = "pcie", "pcie_bus";
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
		#interrupt-cells = <1>;
		interrupt-map-mask = <0 0 0 0>;
		interrupt-map = <0x0 0 &gic 56>;
		num-lanes = <4>;
		status = "disabled";
	};
};