iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-davinci/include/mach/da8xx.h

152 lines
5.4 KiB
C
Raw Normal View History

davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
/*
* Chip specific defines for DA8XX/OMAP L1XX SoC
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h> This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-26 17:56:58 +03:00
* 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __ASM_ARCH_DAVINCI_DA8XX_H
#define __ASM_ARCH_DAVINCI_DA8XX_H
davinci: Add support for Sharp LCD035Q3DG01 graphical LCD Add support for the Sharp LCD035Q3DG01 graphical LCD. This requires a minor interface change to da8xx_register_lcdc() so that the board code can pass in the platform_data which describes the lcd controller that's to be used. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-15 18:14:19 -07:00
#include <video/da8xx-fb.h>
davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h> This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-26 17:56:58 +03:00
#include <linux/platform_device.h>
TI Davinci EMAC : Re-use driver for other platforms. The davinci EMAC peripheral is also available on other TI platforms -notably TI AM3517 SoC. This patch modifies the config option and the platform structure header files so that the driver can be reused on non-davinci platforms as well. Signed-off-by: Sriramakrishnan <srk@ti.com> Acked-by: Chaithrika U S <chaithrika@ti.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-19 15:58:25 +05:30
#include <linux/davinci_emac.h>
davinci: da8xx: add spi resources and registration routine Add IO resource structures, platform data, and a registration routine in order to support spi device on DA850/OMAP-L138/AM18x and DA830/OMAP-L137/AM17x platforms. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-24 10:18:28 +05:30
#include <linux/spi/spi.h>
ASoC/ARM: Davinci: McASP: split asp header into platform and audio specific Davinci McASP header & driver are shared by few OMAP platforms (like TI81xx, AM335x). Splitting asp header into Davinci platform specific header and Audio specific header helps to share them across platforms. Audio specific defines is moved to to common <linux/platform_data/davinci_asp.h> so that the header can be accessed by all related platforms. While here, correct the header usage (remove multiple header re-definitions and unused headers) and remove platform names from structures comments and enum. Also some some coding style errors. Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Acked-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-27 18:56:41 +05:30
#include <linux/platform_data/davinci_asp.h>
reboot: arm: change reboot_mode to use enum reboot_mode Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 16:01:40 -07:00
#include <linux/reboot.h>
[media] ARM: davinci: da850: Add SoC related definitions for VPIF Add clock, pin mux definitions and registration function for VPIF capture and display driver on DA850/OMAP-L138 SoC. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-23 06:17:24 -03:00
#include <linux/videodev2.h>
davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h> This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-26 17:56:58 +03:00
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
#include <mach/serial.h>
davinci: da850/omap-l138: add support for SoC suspend This patch adds support for registering for suspend-to-RAM functionality on da850/omap-l138 SoCs. da850 supports wakeup based on external event and RTC alarm. Currently only RTC alarm based wakeup is supported. Support for wakeup based on external event will be added as later improvements. For scheduling an alarm event on RTC some useful code is present in Documentation/rtc.txt Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-17 18:29:32 +05:30
#include <mach/pm.h>
ARM: davinci: move private EDMA API to arm/common Move mach-davinci/dma.c to common/edma.c so it can be used by OMAP (specifically AM33xx) as well. Signed-off-by: Matt Porter <mporter@ti.com> Acked-by: Chris Ball <cjb@laptop.org> # davinci_mmc.c Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> [nsekhar@ti.com: dropped davinci sffsdr changes] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-03-06 11:15:31 -05:00
#include <linux/platform_data/edma.h>
ARM: davinci: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the davinci include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Ben Dooks" <ben-linux@fluff.org> Cc: "Wolfram Sang" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: davinci-linux-open-source@linux.davincidsp.com
2012-08-24 15:11:34 +02:00
#include <linux/platform_data/i2c-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_data/spi-davinci.h>
ARM: davinci: da8xx: add DA850 PRUSS support Adds PRUSS clock support and registration helper for the uio_pruss device. Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-08 09:53:08 -04:00
#include <linux/platform_data/uio_pruss.h>
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
[media] ARM: davinci: da850: Add SoC related definitions for VPIF Add clock, pin mux definitions and registration function for VPIF capture and display driver on DA850/OMAP-L138 SoC. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-23 06:17:24 -03:00
#include <media/davinci/vpif_types.h>
davinci: da8xx/omapl1: add support for the second sysconfig module OMAP-L138 adds a second SYSCFG region having useful functionality like deep sleep, pull up/down control and SATA clock stop. This patch makes provision for accessing registers from second SYSCFG region in da8xx code. Note that OMAP-L137 has a single SYSCFG region. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-16 17:21:32 +05:30
extern void __iomem *da8xx_syscfg0_base;
extern void __iomem *da8xx_syscfg1_base;
davinci: DA8XX/OMAP-L1XX: Avoid use of IO_ADDRESS for SYSCFG module Avoid use of IO_ADDRESS() for SYSCFG module by doing an ioremap() instead. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-31 15:47:59 +05:30
davinci: am18x/da850/omap-l138: add support for higher speed grades AM18x/DA850/OMAP-L138 SoCs have variants that can operate at a maximum of 456 MHz at 1.3V operating point. Also the 1.2V operating point has a variant that can support a maximum of 375 MHz. This patch adds three new OPPs (456 MHz, 408 MHz and 372 MHz) to the list of DA850 OPPs. Not all silicon is qualified to run at higher speeds and unfortunately the maximum speed the chip can support can only be determined from the label on the package (not software readable). Because of this, we depend on the maximum speed grade information to be provided to us in some board specific way. The board informs the maximum speed grade information by setting the da850_max_speed variable. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-20 21:31:33 +05:30
/*
* If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade
* (than the regular 300Mhz variant), the board code should set this up
* with the supported speed before calling da850_register_cpufreq().
*/
extern unsigned int da850_max_speed;
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
/*
* The cp_intc interrupt controller for the da8xx isn't in the same
* chunk of physical memory space as the other registers (like it is
* on the davincis) so it needs to be mapped separately. It will be
* mapped early on when the I/O space is mapped and we'll put it just
* before the I/O space in the processor's virtual memory space.
*/
#define DA8XX_CP_INTC_BASE 0xfffee000
#define DA8XX_CP_INTC_SIZE SZ_8K
#define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
davinci: da8xx/omapl1: add support for the second sysconfig module OMAP-L138 adds a second SYSCFG region having useful functionality like deep sleep, pull up/down control and SATA clock stop. This patch makes provision for accessing registers from second SYSCFG region in da8xx code. Note that OMAP-L137 has a single SYSCFG region. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-16 17:21:32 +05:30
#define DA8XX_SYSCFG0_BASE (IO_PHYS + 0x14000)
#define DA8XX_SYSCFG0_VIRT(x) (da8xx_syscfg0_base + (x))
davinci: DA8XX/OMAP-L1XX: JTAG ID register should offset from SYSCFG base This makes it clear that JTAG ID register is part of the SYSCFG module Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-31 15:48:00 +05:30
#define DA8XX_JTAG_ID_REG 0x18
ARM: davinci: da8xx: add remoteproc support Add remoteproc platform device for controlling the DSP on da8xx. The patch uses CMA-based reservation of physical memory block for DSP use. A new kernel command-line parameter has been added to allow boot-time specification of the physical memory block. Signed-off-by: Robert Tivy <rtivy@ti.com> [nsekhar@ti.com: edit commit message for readability and style improvements] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-03-28 18:41:46 -07:00
#define DA8XX_HOST1CFG_REG 0x44
#define DA8XX_CHIPSIG_REG 0x174
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 21:14:01 +05:30
#define DA8XX_CFGCHIP0_REG 0x17c
ARM: davinci: da850: add ECAP & EHRPWM clock nodes Add ECAP and EHRPWM module clock nodes. Also add a clock node for TBCLK for EHRWPM. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-03-25 13:19:48 +05:30
#define DA8XX_CFGCHIP1_REG 0x180
davinci: DA8xx: CFGCHIP2 register definitions These are needed by the MUSB and OHCI glue layers... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-25 22:24:57 +04:00
#define DA8XX_CFGCHIP2_REG 0x184
davinci: DA850/OMAP-L138: allow async3 source to be changed The patch allows Async3 clock source to be selected between PLL1 SYSCLK2 and PLL0 SYSCLK2. Having Async3 source from PLL1 SYSCLK2 allows peripherals on that domain to remain unaffected by frequency scaling on PLL0. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-31 15:48:05 +05:30
#define DA8XX_CFGCHIP3_REG 0x188
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
davinci: da8xx/omapl1: add support for the second sysconfig module OMAP-L138 adds a second SYSCFG region having useful functionality like deep sleep, pull up/down control and SATA clock stop. This patch makes provision for accessing registers from second SYSCFG region in da8xx code. Note that OMAP-L137 has a single SYSCFG region. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-16 17:21:32 +05:30
#define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000)
#define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x))
davinci: da850/omap-l138: add support for SoC suspend This patch adds support for registering for suspend-to-RAM functionality on da850/omap-l138 SoCs. da850 supports wakeup based on external event and RTC alarm. Currently only RTC alarm based wakeup is supported. Support for wakeup based on external event will be added as later improvements. For scheduling an alarm event on RTC some useful code is present in Documentation/rtc.txt Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-17 18:29:32 +05:30
#define DA8XX_DEEPSLEEP_REG 0x8
davinci: da850: add support for SATA interface Add support for SATA controller on the DA850/OMAP-L138/AM18x devices. The patch adds the necessary clocks, platform resources and a routine to initialize the SATA controller. The PHY configuration in this patch is courtesy the work done by Zegeye Alemu, Swaminathan and Mansoor Ahamed from TI. While testing this patch, enable port multiplier support iff you are actually using one. The reasons of this behaviour are discussed here: http://patchwork.ozlabs.org/patch/78163/ ChangeLog: v3: Removed fields which were being initialized to zero in PHY configuration. Moved SATA base address definition to the top of the file to make it inline with what is done for the rest of the modules. v2: Addressed comments from Sergei. Removed unnecessary braces and removed unnecessary else after goto. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-06 06:01:23 +00:00
#define DA8XX_PWRDN_REG 0x18
davinci: da8xx/omapl1: add support for the second sysconfig module OMAP-L138 adds a second SYSCFG region having useful functionality like deep sleep, pull up/down control and SATA clock stop. This patch makes provision for accessing registers from second SYSCFG region in da8xx code. Note that OMAP-L137 has a single SYSCFG region. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-16 17:21:32 +05:30
davinci: Move the da830/omap-l137 #defines to header file With the introduction of TI da850/omap-l138, some of the macros defined for da830/omap-l137 will be needed in da850 source file. So, move the common macros to da8xx.h header file. Also, modify the macro names from DA830_... to DA8XX_. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-10 02:08:31 -04:00
#define DA8XX_PSC0_BASE 0x01c10000
#define DA8XX_PLL0_BASE 0x01c11000
#define DA8XX_TIMER64P0_BASE 0x01c20000
#define DA8XX_TIMER64P1_BASE 0x01c21000
[media] ARM: davinci: da850: Add SoC related definitions for VPIF Add clock, pin mux definitions and registration function for VPIF capture and display driver on DA850/OMAP-L138 SoC. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-23 06:17:24 -03:00
#define DA8XX_VPIF_BASE 0x01e17000
davinci: Move the da830/omap-l137 #defines to header file With the introduction of TI da850/omap-l138, some of the macros defined for da830/omap-l137 will be needed in da850 source file. So, move the common macros to da8xx.h header file. Also, modify the macro names from DA830_... to DA8XX_. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-10 02:08:31 -04:00
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_PSC1_BASE 0x01e27000
davinci: Add NOR flash support for da850/omap-l138 This patch adds platform data for the 8MB NOR flash found on da850/omap-l138 EVM. Both NOR and NAND can co-exist on da850/omap-l138 as they are using different chip selects. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 17:36:25 -04:00
#define DA8XX_AEMIF_CS2_BASE 0x60000000
davinci: Add NAND flash support for DA850/OMAP-L138 This patch adds platform data for the 512MB NAND Flash found on DA850/OMAP-L138 EVM. Currently it supports only 1-bit ECC. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 16:21:11 -04:00
#define DA8XX_AEMIF_CS3_BASE 0x62000000
#define DA8XX_AEMIF_CTL_BASE 0x68000000
ARM: davinci: da850: changed SRAM allocator to shared ram. This patch modifies the sram allocator to allocate memory from the DA8XX shared RAM. Regression tested suspend/resume on AM180x EVM. Signed-off-by: Subhasish Ghosh <subhasish@mistralsolutions.com> [rebased onto consolidated SRAM patches] Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> [rebased to mainline as consolidated SRAM patches were dropped] Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-05 13:04:42 -04:00
#define DA8XX_SHARED_RAM_BASE 0x80000000
davinci: da850/omap-l138: create static map for SRAM Create static map for internal SRAM and populate SRAM base and size in soc_info structure to allow SRAM allocation functions from arch/arm/mach-davinci/sram.c to work. On DA850 SRAM is used for suspend-to-RAM implementation in places where DDR2 cannot be accessed as its clocks are stopped. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-16 17:21:39 +05:30
#define DA8XX_ARM_RAM_BASE 0xffff0000
davinci: Move the da830/omap-l137 #defines to header file With the introduction of TI da850/omap-l138, some of the macros defined for da830/omap-l137 will be needed in da850 source file. So, move the common macros to da8xx.h header file. Also, modify the macro names from DA830_... to DA8XX_. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-10 02:08:31 -04:00
ARM: davinci: remove __init atrribute from function declaration __init attribute does not make sense on function declarations. Get rid of them in mach-davinci. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-01 17:03:36 +05:30
void da830_init(void);
void da850_init(void);
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
davinci: da8xx/omapl EVM: Specify reserved channels/slots The drivers on da8xx/omapl EVMs do not utilize all the channels and slots provided by EDMA. Some of these are better utilitzed by the DSP on the SoC for speeding up codec operations. Reserve these channels/slots for the DSP. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-06-29 11:35:14 +05:30
int da830_register_edma(struct edma_rsv_info *rsv);
int da850_register_edma(struct edma_rsv_info *rsv[2]);
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
ARM: davinci: da8xx_register_spi() should not register SPI board info Without this patch, da8xx_register_spi() registers the SPI board info, the SPI controller, and sets its number of chipselect to the size of the static spi_board_info array. This is bad because a SPI board info may declare devices for different SPI buses, and because other code can also call spi_register_board_info() (e.g. a daughter board might provide additional SPI devices). This patch removes the spi_register_board_info() call from da8xx_register_spi(), renames this last one to da8xx_register_spi_bus() to be more explicit, takes the number of chipselect as a function parameter, and updates the impacted board-da8{3,5}0-evm.c, and board-mityomapl138.c files accordingly. It also sets the SPI platform data static, as it doesn't need to be exported. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> [nsekhar@ti.com: fixed conflicts with v3.7-rc7, converted to use pr_warn(), modified print messages to use __func__] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-09-10 20:29:13 -04:00
int da8xx_register_spi_bus(int instance, unsigned num_chipselect);
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
int da8xx_register_watchdog(void);
DA8xx: MUSB platform device registration Add the function to register the MUSB platform device. Additional compile warning fixes by Sekhar Nori. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-30 23:49:44 +04:00
int da8xx_register_usb20(unsigned mA, unsigned potpgt);
davinci: DA8xx: OHCI platform device Add the function to register the OHCI platform device, given the root hub related platform data passed from the board specific code. The platfrom data provide for overriding the OHCI port power and over-current bits at the board level. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-25 23:14:02 +04:00
int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
int da8xx_register_emac(void);
ARM: davinci: da8xx: add DA850 PRUSS support Adds PRUSS clock support and registration helper for the uio_pruss device. Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-08 09:53:08 -04:00
int da8xx_register_uio_pruss(void);
davinci: Add support for Sharp LCD035Q3DG01 graphical LCD Add support for the Sharp LCD035Q3DG01 graphical LCD. This requires a minor interface change to da8xx_register_lcdc() so that the board code can pass in the platform_data which describes the lcd controller that's to be used. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-15 18:14:19 -07:00
int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
davinci: Add MMC/SD support for da850/omap-l138 There are two instances of MMC/SD on da850/omap-l138. Connector for the first instance is available on the EVM. This patch adds support for this instance. This patch also adds support for card detect and write protect switches on da850/omap-l138 EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 15:16:23 -04:00
int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
DA850: Add MMCSD1 resources, platform device and convenience registration function Add resources, platform device and convenience registration function for DA850's second MMC/SD controller (MMCSD1). Signed-off-by: Juha Kuikka <juha.kuikka@elektrobit.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-08-26 12:40:47 -07:00
int da850_register_mmcsd1(struct davinci_mmc_config *config);
ARM: davinci: remove __init atrribute from function declaration __init attribute does not make sense on function declarations. Get rid of them in mach-davinci. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-01 17:03:36 +05:30
void da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
davinci: Add RTC support for DA8xx/OMAP-L13x SoC's Add RTC support for the da830/omap-l137 and da850/omap-l138 SoC's by leveraging existing the rtc-omap driver. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-15 18:15:54 -07:00
int da8xx_register_rtc(void);
davinci: am18x/da850/omap-l138: keep async clock constant with cpufreq Keep PLL0 SYSCLK3 at a constant rate of 100MHz. This enables the AEMIF timing to remain valid even as the PLL0 output is changed by cpufreq driver to save power. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-20 16:46:51 +05:30
int da850_register_cpufreq(char *async_clk);
davinci: DA8XX/OMAP-L1XX: add support for cpuidle driver register This patch provides a function to help register cpuidle driver on da8xx/omap-l1xx platforms. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-22 15:12:14 +05:30
int da8xx_register_cpuidle(void);
ARM: davinci: remove __init atrribute from function declaration __init attribute does not make sense on function declarations. Get rid of them in mach-davinci. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-01 17:03:36 +05:30
void __iomem *da8xx_get_mem_ctlr(void);
davinci: da850/omap-l138: add support for SoC suspend This patch adds support for registering for suspend-to-RAM functionality on da850/omap-l138 SoCs. da850 supports wakeup based on external event and RTC alarm. Currently only RTC alarm based wakeup is supported. Support for wakeup based on external event will be added as later improvements. For scheduling an alarm event on RTC some useful code is present in Documentation/rtc.txt Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-17 18:29:32 +05:30
int da850_register_pm(struct platform_device *pdev);
ARM: davinci: remove __init atrribute from function declaration __init attribute does not make sense on function declarations. Get rid of them in mach-davinci. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-01 17:03:36 +05:30
int da850_register_sata(unsigned long refclkpn);
int da850_register_vpif(void);
int da850_register_vpif_display
[media] ARM: davinci: da850: Add SoC related definitions for VPIF Add clock, pin mux definitions and registration function for VPIF capture and display driver on DA850/OMAP-L138 SoC. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-23 06:17:24 -03:00
(struct vpif_display_config *display_config);
ARM: davinci: remove __init atrribute from function declaration __init attribute does not make sense on function declarations. Get rid of them in mach-davinci. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-01 17:03:36 +05:30
int da850_register_vpif_capture
[media] ARM: davinci: da850: Add SoC related definitions for VPIF Add clock, pin mux definitions and registration function for VPIF capture and display driver on DA850/OMAP-L138 SoC. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-23 06:17:24 -03:00
(struct vpif_capture_config *capture_config);
reboot: arm: change reboot_mode to use enum reboot_mode Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 16:01:40 -07:00
void da8xx_restart(enum reboot_mode mode, const char *cmd);
ARM: davinci: da8xx: add remoteproc support Add remoteproc platform device for controlling the DSP on da8xx. The patch uses CMA-based reservation of physical memory block for DSP use. A new kernel command-line parameter has been added to allow boot-time specification of the physical memory block. Signed-off-by: Robert Tivy <rtivy@ti.com> [nsekhar@ti.com: edit commit message for readability and style improvements] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-03-28 18:41:46 -07:00
void da8xx_rproc_reserve_cma(void);
int da8xx_register_rproc(void);
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;
davinci: Add support for Sharp LCD035Q3DG01 graphical LCD Add support for the Sharp LCD035Q3DG01 graphical LCD. This requires a minor interface change to da8xx_register_lcdc() so that the board code can pass in the platform_data which describes the lcd controller that's to be used. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-15 18:14:19 -07:00
extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
Davinci: watchdog reset separation across socs The earlier watchdog reset mechanism had a couple of limitations. First, it embedded a reference to "davinci_wdt_device" inside common code. This forced all derived platforms (da8xx and tnetv107x) to define such a device. This also would have caused problems in including multiple socs in a single build due to symbol redefinition. With this patch, davinci_watchdog_reset() now takes the platform device as an argument. The davinci_soc_info struct has been extended to include a reset function and a watchdog platform_device. arch_reset() then uses these elements to reset the system in a SoC specific fashion. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-01 18:38:28 -04:00
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
extern const short da830_emif25_pins[];
extern const short da830_spi0_pins[];
extern const short da830_spi1_pins[];
extern const short da830_mmc_sd_pins[];
extern const short da830_uart0_pins[];
extern const short da830_uart1_pins[];
extern const short da830_uart2_pins[];
extern const short da830_usb20_pins[];
extern const short da830_usb11_pins[];
extern const short da830_uhpi_pins[];
extern const short da830_cpgmac_pins[];
extern const short da830_emif3c_pins[];
extern const short da830_mcasp0_pins[];
extern const short da830_mcasp1_pins[];
extern const short da830_mcasp2_pins[];
extern const short da830_i2c0_pins[];
extern const short da830_i2c1_pins[];
extern const short da830_lcdcntl_pins[];
extern const short da830_pwm_pins[];
extern const short da830_ecap0_pins[];
extern const short da830_ecap1_pins[];
extern const short da830_ecap2_pins[];
extern const short da830_eqep0_pins[];
extern const short da830_eqep1_pins[];
[media] ARM: davinci: da850: Add SoC related definitions for VPIF Add clock, pin mux definitions and registration function for VPIF capture and display driver on DA850/OMAP-L138 SoC. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-23 06:17:24 -03:00
extern const short da850_vpif_capture_pins[];
extern const short da850_vpif_display_pins[];
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 06:41:54 -04:00
extern const short da850_i2c0_pins[];
extern const short da850_i2c1_pins[];
davinci: Add platform support for da850/omap-l138 GLCD This patch adds platform support for the graphic display (Sharp LK043T1DG01) found on DA850/OMAP-L138 based EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 14:33:14 -04:00
extern const short da850_lcdcntl_pins[];
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 06:41:54 -04:00
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-03 18:36:54 -07:00
#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
Reference in New Issue Copy Permalink