iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-tegra/pm.h

50 lines
1.4 KiB
C
Raw Normal View History

ARM: tegra30: cpuidle: add powered-down state for secondary CPUs This supports power-gated idle on secondary CPUs for Tegra30. The secondary CPUs can go into powered-down state independently. When CPU goes into this state, it saves it's contexts and puts itself to flow controlled WFI state. After that, it will been power gated. Be aware of that, you may see the legacy power state "LP2" in the code which is exactly the same meaning of "CPU power down". Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-31 17:41:17 +08:00
/*
* Copyright (C) 2010 Google, Inc.
* Copyright (c) 2010-2012 NVIDIA Corporation. All rights reserved.
*
* Author:
* Colin Cross <ccross@google.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _MACH_TEGRA_PM_H_
#define _MACH_TEGRA_PM_H_
ARM: tegra: add common LP1 suspend support The LP1 suspending mode on Tegra means CPU rail off, devices and PLLs are clock gated and SDRAM in self-refresh mode. That means the low level LP1 suspending and resuming code couldn't be run on DRAM and the CPU must switch to the always on clock domain (a.k.a. CLK_M 12MHz oscillator). And the system clock (SCLK) would be switched to CLK_S, a 32KHz oscillator. The LP1 low level handling code need to be moved to IRAM area first. And marking the LP1 mask for indicating the Tegra device is in LP1. The CPU power timer needs to be re-calculated based on 32KHz that was originally based on PCLK. When resuming from LP1, the LP1 reset handler will resume PLLs and then put DRAM to normal mode. Then jumping to the "tegra_resume" that will restore full context before back to kernel. The "tegra_resume" handler was expected to be found in PMC_SCRATCH41 register. This is common LP1 procedures for Tegra, so we do these jobs mainly in this patch: * moving LP1 low level handling code to IRAM * marking LP1 mask * copying the physical address of "tegra_resume" to PMC_SCRATCH41 * re-calculate the CPU power timer based on 32KHz Signed-off-by: Joseph Lo <josephl@nvidia.com> [swarren, replaced IRAM_CODE macro with IO_ADDRESS(TEGRA_IRAM_CODE_AREA)] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 17:40:03 +08:00
struct tegra_lp1_iram {
void *start_addr;
void *end_addr;
};
ARM: tegra: Convert PMC to a driver This commit converts the PMC support code to a platform driver. Because the boot process needs to call into this driver very early, also set up a minimal environment via an early initcall. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-11 13:19:06 +02:00
ARM: tegra: add common LP1 suspend support The LP1 suspending mode on Tegra means CPU rail off, devices and PLLs are clock gated and SDRAM in self-refresh mode. That means the low level LP1 suspending and resuming code couldn't be run on DRAM and the CPU must switch to the always on clock domain (a.k.a. CLK_M 12MHz oscillator). And the system clock (SCLK) would be switched to CLK_S, a 32KHz oscillator. The LP1 low level handling code need to be moved to IRAM area first. And marking the LP1 mask for indicating the Tegra device is in LP1. The CPU power timer needs to be re-calculated based on 32KHz that was originally based on PCLK. When resuming from LP1, the LP1 reset handler will resume PLLs and then put DRAM to normal mode. Then jumping to the "tegra_resume" that will restore full context before back to kernel. The "tegra_resume" handler was expected to be found in PMC_SCRATCH41 register. This is common LP1 procedures for Tegra, so we do these jobs mainly in this patch: * moving LP1 low level handling code to IRAM * marking LP1 mask * copying the physical address of "tegra_resume" to PMC_SCRATCH41 * re-calculate the CPU power timer based on 32KHz Signed-off-by: Joseph Lo <josephl@nvidia.com> [swarren, replaced IRAM_CODE macro with IO_ADDRESS(TEGRA_IRAM_CODE_AREA)] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 17:40:03 +08:00
extern struct tegra_lp1_iram tegra_lp1_iram;
extern void (*tegra_sleep_core_finish)(unsigned long v2p);
ARM: tegra: add LP1 suspend support for Tegra20 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * putting SDRAM into self-refresh * storing some EMC registers and SCLK burst policy * switching CPU to CLK_M (12MHz OSC) * switching SCLK to CLK_S (32KHz OSC) * tunning off PLLM, PLLP and PLLC * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, and PLLC * restoring some EMC registers and SCLK burst policy * setting up CCLK burst policy to PLLP * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLP. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Colin Cross <ccross@android.com> Gary King <gking@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 17:40:05 +08:00
void tegra20_lp1_iram_hook(void);
void tegra20_sleep_core_init(void);
ARM: tegra: add LP1 suspend support for Tegra30 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLX. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 17:40:04 +08:00
void tegra30_lp1_iram_hook(void);
void tegra30_sleep_core_init(void);
ARM: tegra: don't pass CPU ID to tegra_{set,clear}_cpu_in_lp2 tegra_{set,clear}_cpu_in_lp2 can easily determine which CPU ID they are running on; there is no need to pass the CPU ID into those functions. So, remove their CPU ID function parameter. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-06-04 18:47:35 +08:00
void tegra_clear_cpu_in_lp2(void);
bool tegra_set_cpu_in_lp2(void);
ARM: tegra30: cpuidle: add powered-down state for secondary CPUs This supports power-gated idle on secondary CPUs for Tegra30. The secondary CPUs can go into powered-down state independently. When CPU goes into this state, it saves it's contexts and puts itself to flow controlled WFI state. After that, it will been power gated. Be aware of that, you may see the legacy power state "LP2" in the code which is exactly the same meaning of "CPU power down". Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-31 17:41:17 +08:00
ARM: tegra: cpuidle: remove redundant parameters for powered-down mode After the patch series for system suspending support, tegra_idle_lp2_last() no longer uses its parameters cpu_on_time or cpu_off_time, so remove them. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-02 01:20:50 +00:00
void tegra_idle_lp2_last(void);
ARM: tegra30: cpuidle: add powered-down state for CPU0 This is a power gating idle mode. It support power gating vdd_cpu rail after all cpu cores in "powered-down" status. For Tegra30, the CPU0 can enter this state only when all secondary CPU is offline. We need to take care and make sure whole secondary CPUs were offline and checking the CPU power gate status. After that, the CPU0 can go into "powered-down" state safely. Then shut off the CPU rail. Be aware of that, you may see the legacy power state "LP2" in the code which is exactly the same meaning of "CPU power down". Base on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-31 17:41:21 +08:00
extern void (*tegra_tear_down_cpu)(void);
ARM: tegra: pm: add platform suspend support Adding suspend to RAM support for Tegra platform. There are three suspend mode for Tegra. The difference were below. * LP2: CPU voltage off * LP1: CPU voltage off, DRAM in self-refresh * LP0: CPU + Core voltage off, DRAM in self-refresh After this patch, the LP2 suspend mode will be supported. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 19:31:47 +08:00
#ifdef CONFIG_PM_SLEEP
void tegra_init_suspend(void);
#else
static inline void tegra_init_suspend(void) {}
#endif
ARM: tegra30: cpuidle: add powered-down state for secondary CPUs This supports power-gated idle on secondary CPUs for Tegra30. The secondary CPUs can go into powered-down state independently. When CPU goes into this state, it saves it's contexts and puts itself to flow controlled WFI state. After that, it will been power gated. Be aware of that, you may see the legacy power state "LP2" in the code which is exactly the same meaning of "CPU power down". Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-31 17:41:17 +08:00
#endif /* _MACH_TEGRA_PM_H_ */
Reference in New Issue Copy Permalink