iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/clk/rockchip/clk-rk3036.c

494 lines
20 KiB
C
Raw Normal View History

clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
/*
* Copyright (c) 2014 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
* Copyright (c) 2015 Rockchip Electronics Co. Ltd.
* Author: Xing Zheng <zhengxing@rock-chips.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/syscore_ops.h>
#include <dt-bindings/clock/rk3036-cru.h>
#include "clk.h"
#define RK3036_GRF_SOC_STATUS0 0x14c
enum rk3036_plls {
apll, dpll, gpll,
};
static struct rockchip_pll_rate_table rk3036_pll_rates[] = {
/* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
RK3036_PLL_RATE( 96000000, 1, 64, 4, 4, 1, 0),
{ /* sentinel */ },
};
#define RK3036_DIV_CPU_MASK 0x1f
#define RK3036_DIV_CPU_SHIFT 8
#define RK3036_DIV_PERI_MASK 0xf
#define RK3036_DIV_PERI_SHIFT 0
#define RK3036_DIV_ACLK_MASK 0x7
#define RK3036_DIV_ACLK_SHIFT 4
#define RK3036_DIV_HCLK_MASK 0x3
#define RK3036_DIV_HCLK_SHIFT 8
#define RK3036_DIV_PCLK_MASK 0x7
#define RK3036_DIV_PCLK_SHIFT 12
#define RK3036_CLKSEL1(_core_periph_div) \
{ \
.reg = RK2928_CLKSEL_CON(1), \
.val = HIWORD_UPDATE(_core_periph_div, RK3036_DIV_PERI_MASK, \
RK3036_DIV_PERI_SHIFT) \
}
#define RK3036_CPUCLK_RATE(_prate, _core_periph_div) \
{ \
.prate = _prate, \
.divs = { \
RK3036_CLKSEL1(_core_periph_div), \
}, \
}
static struct rockchip_cpuclk_rate_table rk3036_cpuclk_rates[] __initdata = {
RK3036_CPUCLK_RATE(816000000, 4),
RK3036_CPUCLK_RATE(600000000, 4),
RK3036_CPUCLK_RATE(312000000, 4),
};
static const struct rockchip_cpuclk_reg_data rk3036_cpuclk_data = {
.core_reg = RK2928_CLKSEL_CON(0),
.div_core_shift = 0,
.div_core_mask = 0x1f,
clk: rockchip: allow varying mux parameters for cpuclk pll-sources Thers are only two parent PLLs that APLL and GPLL for core on the previous SoCs (RK3066/RK3188/RK3288/RK3368). Hence, we set fixed GPLL as alternate parent when core is switching freq. Since RK3399 big.LITTLE architecture, we need to select and adapt more PLLs (ALPLL/ABPLL/DPLL/GPLL) sources. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 10:37:03 +08:00
.mux_core_alt = 1,
.mux_core_main = 0,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
.mux_core_shift = 7,
clk: rockchip: allow varying mux parameters for cpuclk pll-sources Thers are only two parent PLLs that APLL and GPLL for core on the previous SoCs (RK3066/RK3188/RK3288/RK3368). Hence, we set fixed GPLL as alternate parent when core is switching freq. Since RK3399 big.LITTLE architecture, we need to select and adapt more PLLs (ALPLL/ABPLL/DPLL/GPLL) sources. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 10:37:03 +08:00
.mux_core_mask = 0x1,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
};
PNAME(mux_pll_p) = { "xin24m", "xin24m" };
PNAME(mux_armclk_p) = { "apll", "gpll_armclk" };
PNAME(mux_busclk_p) = { "apll", "dpll_cpu", "gpll_cpu" };
PNAME(mux_ddrphy_p) = { "dpll_ddr", "gpll_ddr" };
PNAME(mux_pll_src_3plls_p) = { "apll", "dpll", "gpll" };
PNAME(mux_timer_p) = { "xin24m", "pclk_peri_src" };
clk: rockchip: add "," to mux_pll_src_apll_dpll_gpll_usb480m_p on rk3036 The mux_pll_src_apll_dpll_gpll_usb480m_p parent list was missing a "," between the 3rd and 4th parent names, making them fall together and thus lookups fail. Fix that. Fixes: 5190c08b2989 ("clk: rockchip: add clock controller for rk3036") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-03-01 22:00:41 +01:00
PNAME(mux_pll_src_apll_dpll_gpll_usb480m_p) = { "apll", "dpll", "gpll", "usb480m" };
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
PNAME(mux_mmc_src_p) = { "apll", "dpll", "gpll", "xin24m" };
PNAME(mux_i2s_pre_p) = { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
PNAME(mux_i2s_clkout_p) = { "i2s_pre", "xin12m" };
PNAME(mux_spdif_p) = { "spdif_src", "spdif_frac", "xin12m" };
PNAME(mux_uart0_p) = { "uart0_src", "uart0_frac", "xin24m" };
PNAME(mux_uart1_p) = { "uart1_src", "uart1_frac", "xin24m" };
PNAME(mux_uart2_p) = { "uart2_src", "uart2_frac", "xin24m" };
clk: rockchip: rk3036: rename emac ext source clock There is only support rmii in the RK3036, so we should use the correct ext clock name as described in the TRM. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> [update dt-binding document as well] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-07 20:17:36 +08:00
PNAME(mux_mac_p) = { "mac_pll_src", "rmii_clkin" };
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
PNAME(mux_dclk_p) = { "dclk_lcdc", "dclk_cru" };
static struct rockchip_pll_clock rk3036_pll_clks[] __initdata = {
[apll] = PLL(pll_rk3036, PLL_APLL, "apll", mux_pll_p, 0, RK2928_PLL_CON(0),
RK2928_MODE_CON, 0, 5, 0, rk3036_pll_rates),
[dpll] = PLL(pll_rk3036, PLL_DPLL, "dpll", mux_pll_p, 0, RK2928_PLL_CON(4),
RK2928_MODE_CON, 4, 4, 0, NULL),
[gpll] = PLL(pll_rk3036, PLL_GPLL, "gpll", mux_pll_p, 0, RK2928_PLL_CON(12),
RK2928_MODE_CON, 12, 6, ROCKCHIP_PLL_SYNC_RATE, rk3036_pll_rates),
};
#define MFLAGS CLK_MUX_HIWORD_MASK
#define DFLAGS CLK_DIVIDER_HIWORD_MASK
#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
clk: rockchip: fix section mismatches with new child-clocks To model the muxes downstream of fractional dividers we introduced the child property, allowing to describe a direct child clock. The first implementation seems to cause section warnings, as the core clock-tree is marked as initdata while the data pointed to from the child element is not. While there may be some way to also set that missing property in the inline notation I didn't find it, so to actually fix the issue for now move the sub-definitions into separate declarations that can have their own __initdata properties. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-26 14:07:15 +01:00
static struct rockchip_clk_branch rk3036_uart0_fracmux __initdata =
MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
RK2928_CLKSEL_CON(13), 8, 2, MFLAGS);
static struct rockchip_clk_branch rk3036_uart1_fracmux __initdata =
MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
RK2928_CLKSEL_CON(14), 8, 2, MFLAGS);
static struct rockchip_clk_branch rk3036_uart2_fracmux __initdata =
MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
RK2928_CLKSEL_CON(15), 8, 2, MFLAGS);
static struct rockchip_clk_branch rk3036_i2s_fracmux __initdata =
MUX(0, "i2s_pre", mux_i2s_pre_p, CLK_SET_RATE_PARENT,
RK2928_CLKSEL_CON(3), 8, 2, MFLAGS);
static struct rockchip_clk_branch rk3036_spdif_fracmux __initdata =
MUX(SCLK_SPDIF, "sclk_spdif", mux_spdif_p, 0,
RK2928_CLKSEL_CON(5), 8, 2, MFLAGS);
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
/*
* Clock-Architecture Diagram 1
*/
GATE(0, "gpll_armclk", "gpll", CLK_IGNORE_UNUSED,
RK2928_CLKGATE_CON(0), 6, GFLAGS),
clk: rockchip: convert manually created factor clocks to the new type Clean up the init code and move the creation of factor clocks to the appropriate positions coming from the clock architecture diagrams. This also unifies the artificial separation of the hclk_vcodec etc clocks again. We do keep the separate definition of some watchdog and usb480m pseudo clocks for now, as they're not real factor clocks from the clock-tree but placeholders for fixes to come (usb480m gets supplied by the missing driver for the new usbphy type and the watchdog-gate is sitting somewhere else together which we cannot model currently). Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-06-20 16:06:02 +02:00
FACTOR(0, "xin12m", "xin24m", 0, 1, 2),
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
/*
* Clock-Architecture Diagram 2
*/
GATE(0, "dpll_ddr", "dpll", CLK_IGNORE_UNUSED,
RK2928_CLKGATE_CON(0), 2, GFLAGS),
GATE(0, "gpll_ddr", "gpll", CLK_IGNORE_UNUSED,
RK2928_CLKGATE_CON(0), 8, GFLAGS),
COMPOSITE_NOGATE(0, "ddrphy2x", mux_ddrphy_p, CLK_IGNORE_UNUSED,
RK2928_CLKSEL_CON(26), 8, 1, MFLAGS, 0, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
clk: rockchip: convert manually created factor clocks to the new type Clean up the init code and move the creation of factor clocks to the appropriate positions coming from the clock architecture diagrams. This also unifies the artificial separation of the hclk_vcodec etc clocks again. We do keep the separate definition of some watchdog and usb480m pseudo clocks for now, as they're not real factor clocks from the clock-tree but placeholders for fixes to come (usb480m gets supplied by the missing driver for the new usbphy type and the watchdog-gate is sitting somewhere else together which we cannot model currently). Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-06-20 16:06:02 +02:00
FACTOR(0, "ddrphy", "ddrphy2x", 0, 1, 2),
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
COMPOSITE_NOMUX(0, "pclk_dbg", "armclk", CLK_IGNORE_UNUSED,
RK2928_CLKSEL_CON(1), 0, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
RK2928_CLKGATE_CON(0), 7, GFLAGS),
COMPOSITE_NOMUX(0, "aclk_core_pre", "armclk", CLK_IGNORE_UNUSED,
RK2928_CLKSEL_CON(1), 4, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
RK2928_CLKGATE_CON(0), 7, GFLAGS),
GATE(0, "dpll_cpu", "dpll", 0, RK2928_CLKGATE_CON(10), 8, GFLAGS),
GATE(0, "gpll_cpu", "gpll", 0, RK2928_CLKGATE_CON(0), 1, GFLAGS),
COMPOSITE_NOGATE(0, "aclk_cpu_src", mux_busclk_p, 0,
RK2928_CLKSEL_CON(0), 14, 2, MFLAGS, 8, 5, DFLAGS),
GATE(ACLK_CPU, "aclk_cpu", "aclk_cpu_src", CLK_IGNORE_UNUSED,
RK2928_CLKGATE_CON(0), 3, GFLAGS),
COMPOSITE_NOMUX(PCLK_CPU, "pclk_cpu", "aclk_cpu_src", CLK_IGNORE_UNUSED,
RK2928_CLKSEL_CON(1), 12, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
RK2928_CLKGATE_CON(0), 5, GFLAGS),
COMPOSITE_NOMUX(HCLK_CPU, "hclk_cpu", "aclk_cpu_src", CLK_IGNORE_UNUSED,
RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_READ_ONLY,
RK2928_CLKGATE_CON(0), 4, GFLAGS),
COMPOSITE(0, "aclk_peri_src", mux_pll_src_3plls_p, 0,
RK2928_CLKSEL_CON(10), 14, 2, MFLAGS, 0, 5, DFLAGS,
RK2928_CLKGATE_CON(2), 0, GFLAGS),
GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", 0,
RK2928_CLKGATE_CON(2), 1, GFLAGS),
DIV(0, "pclk_peri_src", "aclk_peri_src", CLK_IGNORE_UNUSED,
RK2928_CLKSEL_CON(10), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
GATE(PCLK_PERI, "pclk_peri", "pclk_peri_src", 0,
RK2928_CLKGATE_CON(2), 3, GFLAGS),
DIV(0, "hclk_peri_src", "aclk_peri_src", CLK_IGNORE_UNUSED,
RK2928_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
GATE(HCLK_PERI, "hclk_peri", "hclk_peri_src", 0,
RK2928_CLKGATE_CON(2), 2, GFLAGS),
COMPOSITE_NODIV(SCLK_TIMER0, "sclk_timer0", mux_timer_p, CLK_IGNORE_UNUSED,
clk: rockchip: rk3036: fix the FLAGs for clock mux The DFLAGS are used for the clock dividers, the CLKSEL_CON flags of COMPOSITE_NODIV type should be MFLAGS. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-07 20:17:33 +08:00
RK2928_CLKSEL_CON(2), 4, 1, MFLAGS,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
RK2928_CLKGATE_CON(1), 0, GFLAGS),
COMPOSITE_NODIV(SCLK_TIMER1, "sclk_timer1", mux_timer_p, CLK_IGNORE_UNUSED,
clk: rockchip: rk3036: fix the FLAGs for clock mux The DFLAGS are used for the clock dividers, the CLKSEL_CON flags of COMPOSITE_NODIV type should be MFLAGS. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-07 20:17:33 +08:00
RK2928_CLKSEL_CON(2), 5, 1, MFLAGS,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
RK2928_CLKGATE_CON(1), 1, GFLAGS),
COMPOSITE_NODIV(SCLK_TIMER2, "sclk_timer2", mux_timer_p, CLK_IGNORE_UNUSED,
clk: rockchip: rk3036: fix the FLAGs for clock mux The DFLAGS are used for the clock dividers, the CLKSEL_CON flags of COMPOSITE_NODIV type should be MFLAGS. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-07 20:17:33 +08:00
RK2928_CLKSEL_CON(2), 6, 1, MFLAGS,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
RK2928_CLKGATE_CON(2), 4, GFLAGS),
COMPOSITE_NODIV(SCLK_TIMER3, "sclk_timer3", mux_timer_p, CLK_IGNORE_UNUSED,
clk: rockchip: rk3036: fix the FLAGs for clock mux The DFLAGS are used for the clock dividers, the CLKSEL_CON flags of COMPOSITE_NODIV type should be MFLAGS. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-07 20:17:33 +08:00
RK2928_CLKSEL_CON(2), 7, 1, MFLAGS,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
RK2928_CLKGATE_CON(2), 5, GFLAGS),
MUX(0, "uart_pll_clk", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
RK2928_CLKSEL_CON(13), 10, 2, MFLAGS),
COMPOSITE_NOMUX(0, "uart0_src", "uart_pll_clk", 0,
RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
RK2928_CLKGATE_CON(1), 8, GFLAGS),
COMPOSITE_NOMUX(0, "uart1_src", "uart_pll_clk", 0,
clk: rockchip: rk3036: fix uarts clock error Due to a copy-paste error the uart1 and uart2 clock div set incorrect, fix it. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-07 20:17:34 +08:00
RK2928_CLKSEL_CON(14), 0, 7, DFLAGS,
RK2928_CLKGATE_CON(1), 10, GFLAGS),
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
COMPOSITE_NOMUX(0, "uart2_src", "uart_pll_clk", 0,
clk: rockchip: rk3036: fix uarts clock error Due to a copy-paste error the uart1 and uart2 clock div set incorrect, fix it. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-07 20:17:34 +08:00
RK2928_CLKSEL_CON(15), 0, 7, DFLAGS,
RK2928_CLKGATE_CON(1), 12, GFLAGS),
clk: rockchip: rk3036: include downstream muxes into fractional dividers Use the newly introduced possibility to combine the fractional dividers with their downstream muxes for all fractional dividers on currently supported RK3036 SoCs. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-22 22:28:01 +01:00
COMPOSITE_FRACMUX(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
RK2928_CLKSEL_CON(17), 0,
clk: rockchip: rk3036: include downstream muxes into fractional dividers Use the newly introduced possibility to combine the fractional dividers with their downstream muxes for all fractional dividers on currently supported RK3036 SoCs. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-22 22:28:01 +01:00
RK2928_CLKGATE_CON(1), 9, GFLAGS,
clk: rockchip: fix section mismatches with new child-clocks To model the muxes downstream of fractional dividers we introduced the child property, allowing to describe a direct child clock. The first implementation seems to cause section warnings, as the core clock-tree is marked as initdata while the data pointed to from the child element is not. While there may be some way to also set that missing property in the inline notation I didn't find it, so to actually fix the issue for now move the sub-definitions into separate declarations that can have their own __initdata properties. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-26 14:07:15 +01:00
&rk3036_uart0_fracmux),
clk: rockchip: rk3036: include downstream muxes into fractional dividers Use the newly introduced possibility to combine the fractional dividers with their downstream muxes for all fractional dividers on currently supported RK3036 SoCs. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-22 22:28:01 +01:00
COMPOSITE_FRACMUX(0, "uart1_frac", "uart1_src", CLK_SET_RATE_PARENT,
RK2928_CLKSEL_CON(18), 0,
RK2928_CLKGATE_CON(1), 11, GFLAGS,
clk: rockchip: fix section mismatches with new child-clocks To model the muxes downstream of fractional dividers we introduced the child property, allowing to describe a direct child clock. The first implementation seems to cause section warnings, as the core clock-tree is marked as initdata while the data pointed to from the child element is not. While there may be some way to also set that missing property in the inline notation I didn't find it, so to actually fix the issue for now move the sub-definitions into separate declarations that can have their own __initdata properties. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-26 14:07:15 +01:00
&rk3036_uart1_fracmux),
clk: rockchip: rk3036: include downstream muxes into fractional dividers Use the newly introduced possibility to combine the fractional dividers with their downstream muxes for all fractional dividers on currently supported RK3036 SoCs. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-22 22:28:01 +01:00
COMPOSITE_FRACMUX(0, "uart2_frac", "uart2_src", CLK_SET_RATE_PARENT,
RK2928_CLKSEL_CON(19), 0,
RK2928_CLKGATE_CON(1), 13, GFLAGS,
clk: rockchip: fix section mismatches with new child-clocks To model the muxes downstream of fractional dividers we introduced the child property, allowing to describe a direct child clock. The first implementation seems to cause section warnings, as the core clock-tree is marked as initdata while the data pointed to from the child element is not. While there may be some way to also set that missing property in the inline notation I didn't find it, so to actually fix the issue for now move the sub-definitions into separate declarations that can have their own __initdata properties. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-26 14:07:15 +01:00
&rk3036_uart2_fracmux),
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
COMPOSITE(0, "aclk_vcodec", mux_pll_src_3plls_p, 0,
RK2928_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK2928_CLKGATE_CON(3), 11, GFLAGS),
clk: rockchip: convert manually created factor clocks to the new type Clean up the init code and move the creation of factor clocks to the appropriate positions coming from the clock architecture diagrams. This also unifies the artificial separation of the hclk_vcodec etc clocks again. We do keep the separate definition of some watchdog and usb480m pseudo clocks for now, as they're not real factor clocks from the clock-tree but placeholders for fixes to come (usb480m gets supplied by the missing driver for the new usbphy type and the watchdog-gate is sitting somewhere else together which we cannot model currently). Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-06-20 16:06:02 +02:00
FACTOR_GATE(HCLK_VCODEC, "hclk_vcodec", "aclk_vcodec", 0, 1, 4,
RK2928_CLKGATE_CON(3), 12, GFLAGS),
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
COMPOSITE(0, "aclk_hvec", mux_pll_src_3plls_p, 0,
RK2928_CLKSEL_CON(20), 0, 2, MFLAGS, 2, 5, DFLAGS,
RK2928_CLKGATE_CON(10), 6, GFLAGS),
COMPOSITE(0, "aclk_disp1_pre", mux_pll_src_3plls_p, 0,
RK2928_CLKSEL_CON(31), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK2928_CLKGATE_CON(1), 4, GFLAGS),
COMPOSITE(0, "hclk_disp_pre", mux_pll_src_3plls_p, 0,
RK2928_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK2928_CLKGATE_CON(0), 11, GFLAGS),
COMPOSITE(SCLK_LCDC, "dclk_lcdc", mux_pll_src_3plls_p, 0,
RK2928_CLKSEL_CON(28), 0, 2, MFLAGS, 8, 8, DFLAGS,
RK2928_CLKGATE_CON(3), 2, GFLAGS),
COMPOSITE_NODIV(0, "sclk_sdmmc_src", mux_mmc_src_p, 0,
clk: rockchip: rk3036: fix the FLAGs for clock mux The DFLAGS are used for the clock dividers, the CLKSEL_CON flags of COMPOSITE_NODIV type should be MFLAGS. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-07 20:17:33 +08:00
RK2928_CLKSEL_CON(12), 8, 2, MFLAGS,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
RK2928_CLKGATE_CON(2), 11, GFLAGS),
DIV(SCLK_SDMMC, "sclk_sdmmc", "sclk_sdmmc_src", 0,
RK2928_CLKSEL_CON(11), 0, 7, DFLAGS),
COMPOSITE_NODIV(0, "sclk_sdio_src", mux_mmc_src_p, 0,
clk: rockchip: rk3036: fix the FLAGs for clock mux The DFLAGS are used for the clock dividers, the CLKSEL_CON flags of COMPOSITE_NODIV type should be MFLAGS. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-07 20:17:33 +08:00
RK2928_CLKSEL_CON(12), 10, 2, MFLAGS,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
RK2928_CLKGATE_CON(2), 13, GFLAGS),
DIV(SCLK_SDIO, "sclk_sdio", "sclk_sdio_src", 0,
RK2928_CLKSEL_CON(11), 8, 7, DFLAGS),
COMPOSITE(SCLK_EMMC, "sclk_emmc", mux_mmc_src_p, 0,
RK2928_CLKSEL_CON(12), 12, 2, MFLAGS, 0, 7, DFLAGS,
RK2928_CLKGATE_CON(2), 14, GFLAGS),
MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "sclk_sdmmc", RK3036_SDMMC_CON0, 1),
MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc", RK3036_SDMMC_CON1, 0),
MMC(SCLK_SDIO_DRV, "sdio_drv", "sclk_sdio", RK3036_SDIO_CON0, 1),
MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "sclk_sdio", RK3036_SDIO_CON1, 0),
MMC(SCLK_EMMC_DRV, "emmc_drv", "sclk_emmc", RK3036_EMMC_CON0, 1),
MMC(SCLK_EMMC_SAMPLE, "emmc_sample", "sclk_emmc", RK3036_EMMC_CON1, 0),
COMPOSITE(0, "i2s_src", mux_pll_src_3plls_p, 0,
RK2928_CLKSEL_CON(3), 14, 2, MFLAGS, 0, 7, DFLAGS,
RK2928_CLKGATE_CON(0), 9, GFLAGS),
clk: rockchip: rk3036: include downstream muxes into fractional dividers Use the newly introduced possibility to combine the fractional dividers with their downstream muxes for all fractional dividers on currently supported RK3036 SoCs. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-22 22:28:01 +01:00
COMPOSITE_FRACMUX(0, "i2s_frac", "i2s_src", CLK_SET_RATE_PARENT,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
RK2928_CLKSEL_CON(7), 0,
clk: rockchip: rk3036: include downstream muxes into fractional dividers Use the newly introduced possibility to combine the fractional dividers with their downstream muxes for all fractional dividers on currently supported RK3036 SoCs. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-22 22:28:01 +01:00
RK2928_CLKGATE_CON(0), 10, GFLAGS,
clk: rockchip: fix section mismatches with new child-clocks To model the muxes downstream of fractional dividers we introduced the child property, allowing to describe a direct child clock. The first implementation seems to cause section warnings, as the core clock-tree is marked as initdata while the data pointed to from the child element is not. While there may be some way to also set that missing property in the inline notation I didn't find it, so to actually fix the issue for now move the sub-definitions into separate declarations that can have their own __initdata properties. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-26 14:07:15 +01:00
&rk3036_i2s_fracmux),
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
COMPOSITE_NODIV(SCLK_I2S_OUT, "i2s_clkout", mux_i2s_clkout_p, 0,
RK2928_CLKSEL_CON(3), 12, 1, MFLAGS,
RK2928_CLKGATE_CON(0), 13, GFLAGS),
GATE(SCLK_I2S, "sclk_i2s", "i2s_pre", CLK_SET_RATE_PARENT,
RK2928_CLKGATE_CON(0), 14, GFLAGS),
COMPOSITE(0, "spdif_src", mux_pll_src_3plls_p, 0,
RK2928_CLKSEL_CON(5), 10, 2, MFLAGS, 0, 7, DFLAGS,
RK2928_CLKGATE_CON(2), 10, GFLAGS),
clk: rockchip: rk3036: include downstream muxes into fractional dividers Use the newly introduced possibility to combine the fractional dividers with their downstream muxes for all fractional dividers on currently supported RK3036 SoCs. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-22 22:28:01 +01:00
COMPOSITE_FRACMUX(0, "spdif_frac", "spdif_src", 0,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
RK2928_CLKSEL_CON(9), 0,
clk: rockchip: rk3036: include downstream muxes into fractional dividers Use the newly introduced possibility to combine the fractional dividers with their downstream muxes for all fractional dividers on currently supported RK3036 SoCs. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-22 22:28:01 +01:00
RK2928_CLKGATE_CON(2), 12, GFLAGS,
clk: rockchip: fix section mismatches with new child-clocks To model the muxes downstream of fractional dividers we introduced the child property, allowing to describe a direct child clock. The first implementation seems to cause section warnings, as the core clock-tree is marked as initdata while the data pointed to from the child element is not. While there may be some way to also set that missing property in the inline notation I didn't find it, so to actually fix the issue for now move the sub-definitions into separate declarations that can have their own __initdata properties. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-26 14:07:15 +01:00
&rk3036_spdif_fracmux),
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
GATE(SCLK_OTGPHY0, "sclk_otgphy0", "xin12m", CLK_IGNORE_UNUSED,
RK2928_CLKGATE_CON(1), 5, GFLAGS),
COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_3plls_p, 0,
RK2928_CLKSEL_CON(34), 8, 2, MFLAGS, 0, 5, DFLAGS,
RK2928_CLKGATE_CON(3), 13, GFLAGS),
COMPOSITE(SCLK_SPI, "sclk_spi", mux_pll_src_3plls_p, 0,
RK2928_CLKSEL_CON(25), 8, 2, MFLAGS, 0, 7, DFLAGS,
RK2928_CLKGATE_CON(2), 9, GFLAGS),
COMPOSITE(SCLK_NANDC, "sclk_nandc", mux_pll_src_3plls_p, 0,
RK2928_CLKSEL_CON(16), 8, 2, MFLAGS, 10, 5, DFLAGS,
RK2928_CLKGATE_CON(10), 4, GFLAGS),
COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
RK2928_CLKSEL_CON(16), 0, 2, MFLAGS, 2, 5, DFLAGS,
RK2928_CLKGATE_CON(10), 5, GFLAGS),
clk: rockchip: associate SCLK_MAC_PLL and disable reparenting on rk3036 The emac needs constant and very specific rate but the possible PLL-sources are very limited, so we expect the PLL source to be set manually on per board and don't want it to get changed in an automatic way later. So add the necessary clock-id and disable reparenting on set_rate calls. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 16:01:59 +08:00
COMPOSITE_NOGATE(SCLK_MACPLL, "mac_pll_src", mux_pll_src_3plls_p, CLK_SET_RATE_NO_REPARENT,
clk: rockchip: rk3036: fix the div offset for emac clock Due to reference to old version TRM, there are incorrect emac clock node. The SEL_21_9 is used for the parent div, the SEL_21_4 is used for the child div. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-07 20:17:35 +08:00
RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 9, 5, DFLAGS),
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
MUX(SCLK_MACREF, "mac_clk_ref", mux_mac_p, CLK_SET_RATE_PARENT,
RK2928_CLKSEL_CON(21), 3, 1, MFLAGS),
COMPOSITE_NOMUX(SCLK_MAC, "mac_clk", "mac_clk_ref", 0,
clk: rockchip: rk3036: fix the div offset for emac clock Due to reference to old version TRM, there are incorrect emac clock node. The SEL_21_9 is used for the parent div, the SEL_21_4 is used for the child div. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-07 20:17:35 +08:00
RK2928_CLKSEL_CON(21), 4, 5, DFLAGS,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
RK2928_CLKGATE_CON(2), 6, GFLAGS),
clk: rockchip: convert manually created factor clocks to the new type Clean up the init code and move the creation of factor clocks to the appropriate positions coming from the clock architecture diagrams. This also unifies the artificial separation of the hclk_vcodec etc clocks again. We do keep the separate definition of some watchdog and usb480m pseudo clocks for now, as they're not real factor clocks from the clock-tree but placeholders for fixes to come (usb480m gets supplied by the missing driver for the new usbphy type and the watchdog-gate is sitting somewhere else together which we cannot model currently). Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-06-20 16:06:02 +02:00
FACTOR(0, "sclk_macref_out", "hclk_peri_src", 0, 1, 2),
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
MUX(SCLK_HDMI, "dclk_hdmi", mux_dclk_p, 0,
RK2928_CLKSEL_CON(31), 0, 1, MFLAGS),
/*
* Clock-Architecture Diagram 3
*/
/* aclk_cpu gates */
GATE(0, "sclk_intmem", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 12, GFLAGS),
GATE(0, "aclk_strc_sys", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 10, GFLAGS),
/* hclk_cpu gates */
GATE(HCLK_ROM, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 6, GFLAGS),
/* pclk_cpu gates */
GATE(PCLK_GRF, "pclk_grf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 4, GFLAGS),
GATE(PCLK_DDRUPCTL, "pclk_ddrupctl", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 7, GFLAGS),
GATE(PCLK_ACODEC, "pclk_acodec", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 14, GFLAGS),
GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS),
/* aclk_vio gates */
clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for aclk_vio ACLK_VIO is the noc bus clock for display module, display cann't read data from ddr without this clock enabled. Due to it shouldn't belong to any driver, but we need it enabled, so just mark it as the CLK_IGNORE_UNUSED flag. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-16 16:27:18 +08:00
GATE(ACLK_VIO, "aclk_vio", "aclk_disp1_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(6), 13, GFLAGS),
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
GATE(ACLK_LCDC, "aclk_lcdc", "aclk_disp1_pre", 0, RK2928_CLKGATE_CON(9), 6, GFLAGS),
clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for hclk_vio_bus HCLK_VIO_BUS is the noc bus controller clock for display module, due to it shouldn't belong to any driver, but we need it enabled, so just mark it as the CLK_IGNORE_UNUSED flag. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-15 19:54:14 +08:00
GATE(HCLK_VIO_BUS, "hclk_vio_bus", "hclk_disp_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(6), 12, GFLAGS),
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
GATE(HCLK_LCDC, "hclk_lcdc", "hclk_disp_pre", 0, RK2928_CLKGATE_CON(9), 5, GFLAGS),
/* xin24m gates */
GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0, RK2928_CLKGATE_CON(10), 0, GFLAGS),
GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu", "xin24m", 0, RK2928_CLKGATE_CON(10), 1, GFLAGS),
/* aclk_peri gates */
GATE(0, "aclk_peri_axi_matrix", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 3, GFLAGS),
GATE(0, "aclk_cpu_peri", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 2, GFLAGS),
GATE(ACLK_DMAC2, "aclk_dmac2", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1, GFLAGS),
GATE(0, "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 15, GFLAGS),
/* hclk_peri gates */
GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 0, GFLAGS),
GATE(0, "hclk_usb_peri", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 13, GFLAGS),
GATE(0, "hclk_peri_arbi", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 14, GFLAGS),
GATE(HCLK_NANDC, "hclk_nandc", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 9, GFLAGS),
GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 10, GFLAGS),
GATE(HCLK_SDIO, "hclk_sdio", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 11, GFLAGS),
GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 0, GFLAGS),
GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 13, GFLAGS),
GATE(HCLK_OTG1, "hclk_otg1", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 3, GFLAGS),
GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 2, GFLAGS),
GATE(0, "hclk_sfc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS),
clk: rockchip: associate the rk3036 HCLK_EMAC clock-id Associate the new clock id the clock. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Xing Zheng <zhengxing@rock-chips.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 16:01:57 +08:00
GATE(HCLK_MAC, "hclk_mac", "hclk_peri", 0, RK2928_CLKGATE_CON(3), 5, GFLAGS),
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
/* pclk_peri gates */
GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 1, GFLAGS),
GATE(0, "pclk_efuse", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 2, GFLAGS),
GATE(PCLK_TIMER, "pclk_timer", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 7, GFLAGS),
GATE(PCLK_PWM, "pclk_pwm", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 10, GFLAGS),
GATE(PCLK_SPI, "pclk_spi", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 12, GFLAGS),
GATE(PCLK_WDT, "pclk_wdt", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS),
GATE(PCLK_UART0, "pclk_uart0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS),
GATE(PCLK_UART1, "pclk_uart1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
GATE(PCLK_UART2, "pclk_uart2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 2, GFLAGS),
GATE(PCLK_I2C0, "pclk_i2c0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS),
GATE(PCLK_I2C1, "pclk_i2c1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 5, GFLAGS),
GATE(PCLK_I2C2, "pclk_i2c2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 6, GFLAGS),
GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 9, GFLAGS),
GATE(PCLK_GPIO1, "pclk_gpio1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 10, GFLAGS),
GATE(PCLK_GPIO2, "pclk_gpio2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS),
};
static const char *const rk3036_critical_clocks[] __initconst = {
"aclk_cpu",
"aclk_peri",
"hclk_peri",
"pclk_peri",
clk: rockchip: mark pclk_ddrupctl as critical_clock on rk3036 No driver to handle this clk yet, but chip design requiress for this clock supplying the ddr controller to be always on. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-05-02 15:34:03 +08:00
"pclk_ddrupctl",
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
};
static void __init rk3036_clk_init(struct device_node *np)
{
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 10:37:04 +08:00
struct rockchip_clk_provider *ctx;
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
void __iomem *reg_base;
struct clk *clk;
reg_base = of_iomap(np, 0);
if (!reg_base) {
pr_err("%s: could not map cru region\n", __func__);
return;
}
clk: rockchip: Make uartpll a child of the gpll on rk3036 The shared uart-pll is on boot a child of the apll that can get changed by cpu frequency scaling. So move it away to the more stable gpll to make sure the uart doesn't break on cpu frequency changes. This turned up during the 4.11 merge-window when commit 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used") added general termios enablement making the uart on rk3036 change frequency and thus making it susceptible for the frequency scaling issue. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-03-01 22:00:42 +01:00
/*
* Make uart_pll_clk a child of the gpll, as all other sources are
* not that usable / stable.
*/
writel_relaxed(HIWORD_UPDATE(0x2, 0x3, 10),
reg_base + RK2928_CLKSEL_CON(13));
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 10:37:04 +08:00
ctx = rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
if (IS_ERR(ctx)) {
pr_err("%s: rockchip clk init failed\n", __func__);
clk: rockchip: release io resource when failing to init clk We should call iounmap to relase reg_base since it's not going to be used any more if failing to init clk. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-13 12:13:22 +08:00
iounmap(reg_base);
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 10:37:04 +08:00
return;
}
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
if (IS_ERR(clk))
pr_warn("%s: could not register clock usb480m: %ld\n",
__func__, PTR_ERR(clk));
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 10:37:04 +08:00
rockchip_clk_register_plls(ctx, rk3036_pll_clks,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
ARRAY_SIZE(rk3036_pll_clks),
RK3036_GRF_SOC_STATUS0);
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 10:37:04 +08:00
rockchip_clk_register_branches(ctx, rk3036_clk_branches,
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
ARRAY_SIZE(rk3036_clk_branches));
rockchip_clk_protect_critical(rk3036_critical_clocks,
ARRAY_SIZE(rk3036_critical_clocks));
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 10:37:04 +08:00
rockchip_clk_register_armclk(ctx, ARMCLK, "armclk",
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
&rk3036_cpuclk_data, rk3036_cpuclk_rates,
ARRAY_SIZE(rk3036_cpuclk_rates));
rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
ROCKCHIP_SOFTRST_HIWORD_MASK);
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 10:37:04 +08:00
rockchip_register_restart_notifier(ctx, RK2928_GLB_SRST_FST, NULL);
rockchip_clk_of_add_provider(np, ctx);
clk: rockchip: add clock controller for rk3036 Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 15:33:58 +08:00
}
CLK_OF_DECLARE(rk3036_cru, "rockchip,rk3036-cru", rk3036_clk_init);
Reference in New Issue Copy Permalink