linux/drivers/block/ublk_drv.c

2630 lines
64 KiB
C
Raw Normal View History

ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Userspace block device - block device which IO is handled from userspace
*
* Take full use of io_uring passthrough command for communicating with
* ublk userspace daemon(ublksrvd) for handling basic IO request.
*
* Copyright 2022 Ming Lei <ming.lei@redhat.com>
*
* (part of code stolen from loop.c)
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/file.h>
#include <linux/stat.h>
#include <linux/errno.h>
#include <linux/major.h>
#include <linux/wait.h>
#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/swap.h>
#include <linux/slab.h>
#include <linux/compat.h>
#include <linux/mutex.h>
#include <linux/writeback.h>
#include <linux/completion.h>
#include <linux/highmem.h>
#include <linux/sysfs.h>
#include <linux/miscdevice.h>
#include <linux/falloc.h>
#include <linux/uio.h>
#include <linux/ioprio.h>
#include <linux/sched/mm.h>
#include <linux/uaccess.h>
#include <linux/cdev.h>
#include <linux/io_uring.h>
#include <linux/blk-mq.h>
#include <linux/delay.h>
#include <linux/mm.h>
#include <asm/page.h>
#include <linux/task_work.h>
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
#include <linux/namei.h>
#include <linux/kref.h>
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
#include <uapi/linux/ublk_cmd.h>
#define UBLK_MINORS (1U << MINORBITS)
/* All UBLK_F_* have to be included into UBLK_F_ALL */
#define UBLK_F_ALL (UBLK_F_SUPPORT_ZERO_COPY \
| UBLK_F_URING_CMD_COMP_IN_TASK \
| UBLK_F_NEED_GET_DATA \
| UBLK_F_USER_RECOVERY \
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
| UBLK_F_USER_RECOVERY_REISSUE \
| UBLK_F_UNPRIVILEGED_DEV \
2023-05-19 09:50:30 +03:00
| UBLK_F_CMD_IOCTL_ENCODE \
| UBLK_F_USER_COPY)
/* All UBLK_PARAM_TYPE_* should be included here */
#define UBLK_PARAM_TYPE_ALL (UBLK_PARAM_TYPE_BASIC | \
UBLK_PARAM_TYPE_DISCARD | UBLK_PARAM_TYPE_DEVT)
struct ublk_rq_data {
struct llist_node node;
struct kref ref;
};
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
struct ublk_uring_cmd_pdu {
struct ublk_queue *ubq;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
};
/*
* io command is active: sqe cmd is received, and its cqe isn't done
*
* If the flag is set, the io command is owned by ublk driver, and waited
* for incoming blk-mq request from the ublk block device.
*
* If the flag is cleared, the io command will be completed, and owned by
* ublk server.
*/
#define UBLK_IO_FLAG_ACTIVE 0x01
/*
* IO command is completed via cqe, and it is being handled by ublksrv, and
* not committed yet
*
* Basically exclusively with UBLK_IO_FLAG_ACTIVE, so can be served for
* cross verification
*/
#define UBLK_IO_FLAG_OWNED_BY_SRV 0x02
/*
* IO command is aborted, so this flag is set in case of
* !UBLK_IO_FLAG_ACTIVE.
*
* After this flag is observed, any pending or new incoming request
* associated with this io command will be failed immediately
*/
#define UBLK_IO_FLAG_ABORTED 0x04
/*
* UBLK_IO_FLAG_NEED_GET_DATA is set because IO command requires
* get data buffer address from ublksrv.
*
* Then, bio data could be copied into this data buffer for a WRITE request
* after the IO command is issued again and UBLK_IO_FLAG_NEED_GET_DATA is unset.
*/
#define UBLK_IO_FLAG_NEED_GET_DATA 0x08
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
struct ublk_io {
/* userspace buffer address from io cmd */
__u64 addr;
unsigned int flags;
int res;
struct io_uring_cmd *cmd;
};
struct ublk_queue {
int q_id;
int q_depth;
unsigned long flags;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
struct task_struct *ubq_daemon;
char *io_cmd_buf;
struct llist_head io_cmds;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
unsigned long io_addr; /* mapped vm address */
unsigned int max_io_sz;
bool force_abort;
bool timeout;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
unsigned short nr_io_ready; /* how many ios setup */
struct ublk_device *dev;
struct ublk_io ios[];
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
};
#define UBLK_DAEMON_MONITOR_PERIOD (5 * HZ)
struct ublk_device {
struct gendisk *ub_disk;
char *__queues;
unsigned int queue_size;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
struct ublksrv_ctrl_dev_info dev_info;
struct blk_mq_tag_set tag_set;
struct cdev cdev;
struct device cdev_dev;
#define UB_STATE_OPEN 0
#define UB_STATE_USED 1
#define UB_STATE_DELETED 2
unsigned long state;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
int ub_number;
struct mutex mutex;
ublk_drv: fix lockdep warning ub->mutex is used to protecting reading and writing ub->mm, then the following lockdep warning is triggered. Fix it by using one dedicated spin lock for protecting ub->mm. [1] lockdep warning [ 25.046186] ====================================================== [ 25.048886] WARNING: possible circular locking dependency detected [ 25.051610] 5.19.0-rc4_for-v5.20+ #149 Not tainted [ 25.053665] ------------------------------------------------------ [ 25.056334] ublk/989 is trying to acquire lock: [ 25.058296] ffff975d0329a918 (&disk->open_mutex){+.+.}-{3:3}, at: bd_register_pending_holders+0x2a/0x110 [ 25.063678] [ 25.063678] but task is already holding lock: [ 25.066246] ffff975d1df59708 (&ub->mutex){+.+.}-{3:3}, at: ublk_ctrl_uring_cmd+0x2df/0x730 [ 25.069423] [ 25.069423] which lock already depends on the new lock. [ 25.069423] [ 25.072603] [ 25.072603] the existing dependency chain (in reverse order) is: [ 25.074908] [ 25.074908] -> #3 (&ub->mutex){+.+.}-{3:3}: [ 25.076386] __mutex_lock+0x93/0x870 [ 25.077470] ublk_ch_mmap+0x3a/0x140 [ 25.078494] mmap_region+0x375/0x5a0 [ 25.079386] do_mmap+0x33a/0x530 [ 25.080168] vm_mmap_pgoff+0xb9/0x150 [ 25.080979] ksys_mmap_pgoff+0x184/0x1f0 [ 25.081838] do_syscall_64+0x37/0x80 [ 25.082653] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.083730] [ 25.083730] -> #2 (&mm->mmap_lock#2){++++}-{3:3}: [ 25.084707] __might_fault+0x55/0x80 [ 25.085344] _copy_from_user+0x1e/0xa0 [ 25.086020] get_sg_io_hdr+0x26/0xb0 [ 25.086651] scsi_ioctl+0x42f/0x960 [ 25.087267] sr_block_ioctl+0xe8/0x100 [ 25.087734] blkdev_ioctl+0x134/0x2b0 [ 25.088196] __x64_sys_ioctl+0x8a/0xc0 [ 25.088677] do_syscall_64+0x37/0x80 [ 25.089044] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.089548] [ 25.089548] -> #1 (&cd->lock){+.+.}-{3:3}: [ 25.090072] __mutex_lock+0x93/0x870 [ 25.090452] sr_block_open+0x64/0xe0 [ 25.090837] blkdev_get_whole+0x26/0x90 [ 25.091445] blkdev_get_by_dev.part.0+0x1ce/0x2f0 [ 25.092203] blkdev_open+0x52/0x90 [ 25.092617] do_dentry_open+0x1ca/0x360 [ 25.093499] path_openat+0x78d/0xcb0 [ 25.094136] do_filp_open+0xa1/0x130 [ 25.094759] do_sys_openat2+0x76/0x130 [ 25.095454] __x64_sys_openat+0x5c/0x70 [ 25.096078] do_syscall_64+0x37/0x80 [ 25.096637] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.097304] [ 25.097304] -> #0 (&disk->open_mutex){+.+.}-{3:3}: [ 25.098229] __lock_acquire+0x12e2/0x1f90 [ 25.098789] lock_acquire+0xbf/0x2c0 [ 25.099256] __mutex_lock+0x93/0x870 [ 25.099706] bd_register_pending_holders+0x2a/0x110 [ 25.100246] device_add_disk+0x209/0x370 [ 25.100712] ublk_ctrl_uring_cmd+0x405/0x730 [ 25.101205] io_issue_sqe+0xfe/0x2ac0 [ 25.101665] io_submit_sqes+0x352/0x1820 [ 25.102131] __do_sys_io_uring_enter+0x848/0xdc0 [ 25.102646] do_syscall_64+0x37/0x80 [ 25.103087] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.103640] [ 25.103640] other info that might help us debug this: [ 25.103640] [ 25.104549] Chain exists of: [ 25.104549] &disk->open_mutex --> &mm->mmap_lock#2 --> &ub->mutex [ 25.104549] [ 25.105611] Possible unsafe locking scenario: [ 25.105611] [ 25.106258] CPU0 CPU1 [ 25.106677] ---- ---- [ 25.107100] lock(&ub->mutex); [ 25.107446] lock(&mm->mmap_lock#2); [ 25.108045] lock(&ub->mutex); [ 25.108802] lock(&disk->open_mutex); [ 25.109265] [ 25.109265] *** DEADLOCK *** [ 25.109265] [ 25.110117] 2 locks held by ublk/989: [ 25.110490] #0: ffff975d07bbf8a8 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0x83e/0xdc0 [ 25.111249] #1: ffff975d1df59708 (&ub->mutex){+.+.}-{3:3}, at: ublk_ctrl_uring_cmd+0x2df/0x730 [ 25.111943] [ 25.111943] stack backtrace: [ 25.112557] CPU: 2 PID: 989 Comm: ublk Not tainted 5.19.0-rc4_for-v5.20+ #149 [ 25.113137] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014 [ 25.113792] Call Trace: [ 25.114130] <TASK> [ 25.114417] dump_stack_lvl+0x71/0xa0 [ 25.114771] check_noncircular+0xdf/0x100 [ 25.115137] ? register_lock_class+0x38/0x470 [ 25.115524] __lock_acquire+0x12e2/0x1f90 [ 25.115887] ? find_held_lock+0x2b/0x80 [ 25.116244] lock_acquire+0xbf/0x2c0 [ 25.116590] ? bd_register_pending_holders+0x2a/0x110 [ 25.117009] __mutex_lock+0x93/0x870 [ 25.117362] ? bd_register_pending_holders+0x2a/0x110 [ 25.117780] ? bd_register_pending_holders+0x2a/0x110 [ 25.118201] ? kobject_add+0x71/0x90 [ 25.118546] ? bd_register_pending_holders+0x2a/0x110 [ 25.118958] bd_register_pending_holders+0x2a/0x110 [ 25.119373] device_add_disk+0x209/0x370 [ 25.119732] ublk_ctrl_uring_cmd+0x405/0x730 [ 25.120109] ? rcu_read_lock_sched_held+0x3c/0x70 [ 25.120514] io_issue_sqe+0xfe/0x2ac0 [ 25.120863] io_submit_sqes+0x352/0x1820 [ 25.121228] ? rcu_read_lock_sched_held+0x3c/0x70 [ 25.121626] ? __do_sys_io_uring_enter+0x83e/0xdc0 [ 25.122028] ? find_held_lock+0x2b/0x80 [ 25.122390] ? __do_sys_io_uring_enter+0x848/0xdc0 [ 25.122791] __do_sys_io_uring_enter+0x848/0xdc0 [ 25.123190] ? syscall_enter_from_user_mode+0x20/0x70 [ 25.123606] ? syscall_enter_from_user_mode+0x20/0x70 [ 25.124024] do_syscall_64+0x37/0x80 [ 25.124383] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.124829] RIP: 0033:0x7f120a762af6 [ 25.125223] Code: 45 c1 41 89 c2 41 b9 08 00 00 00 41 83 ca 10 f6 87 d0 00 00 00 01 8b bf cc 00 00 00 44 0f 44 d0 45 31 c0c [ 25.126576] RSP: 002b:00007ffdcb3c5518 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa [ 25.127153] RAX: ffffffffffffffda RBX: 00000000013aef50 RCX: 00007f120a762af6 [ 25.127748] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004 [ 25.128351] RBP: 000000000000000b R08: 0000000000000000 R09: 0000000000000008 [ 25.128956] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcb3c74a6 [ 25.129524] R13: 00000000013aef50 R14: 0000000000000000 R15: 00000000000003df [ 25.130121] </TASK> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220721153117.591394-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-21 18:31:17 +03:00
spinlock_t mm_lock;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
struct mm_struct *mm;
struct ublk_params params;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
struct completion completion;
unsigned int nr_queues_ready;
unsigned int nr_privileged_daemon;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
/*
* Our ubq->daemon may be killed without any notification, so
* monitor each queue's daemon periodically
*/
struct delayed_work monitor_work;
struct work_struct quiesce_work;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
struct work_struct stop_work;
};
/* header of ublk_params */
struct ublk_params_header {
__u32 len;
__u32 types;
};
static inline void __ublk_complete_rq(struct request *req);
static void ublk_complete_rq(struct kref *ref);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
static dev_t ublk_chr_devt;
static const struct class ublk_chr_class = {
.name = "ublk-char",
};
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
static DEFINE_IDR(ublk_index_idr);
static DEFINE_SPINLOCK(ublk_idr_lock);
static wait_queue_head_t ublk_idr_wq; /* wait until one idr is freed */
static DEFINE_MUTEX(ublk_ctl_mutex);
/*
* Max ublk devices allowed to add
*
* It can be extended to one per-user limit in future or even controlled
* by cgroup.
*/
static unsigned int ublks_max = 64;
static unsigned int ublks_added; /* protected by ublk_ctl_mutex */
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
static struct miscdevice ublk_misc;
static inline unsigned ublk_pos_to_hwq(loff_t pos)
{
return ((pos - UBLKSRV_IO_BUF_OFFSET) >> UBLK_QID_OFF) &
UBLK_QID_BITS_MASK;
}
static inline unsigned ublk_pos_to_buf_off(loff_t pos)
{
return (pos - UBLKSRV_IO_BUF_OFFSET) & UBLK_IO_BUF_BITS_MASK;
}
static inline unsigned ublk_pos_to_tag(loff_t pos)
{
return ((pos - UBLKSRV_IO_BUF_OFFSET) >> UBLK_TAG_OFF) &
UBLK_TAG_BITS_MASK;
}
static void ublk_dev_param_basic_apply(struct ublk_device *ub)
{
struct request_queue *q = ub->ub_disk->queue;
const struct ublk_param_basic *p = &ub->params.basic;
blk_queue_logical_block_size(q, 1 << p->logical_bs_shift);
blk_queue_physical_block_size(q, 1 << p->physical_bs_shift);
blk_queue_io_min(q, 1 << p->io_min_shift);
blk_queue_io_opt(q, 1 << p->io_opt_shift);
blk_queue_write_cache(q, p->attrs & UBLK_ATTR_VOLATILE_CACHE,
p->attrs & UBLK_ATTR_FUA);
if (p->attrs & UBLK_ATTR_ROTATIONAL)
blk_queue_flag_clear(QUEUE_FLAG_NONROT, q);
else
blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
blk_queue_max_hw_sectors(q, p->max_sectors);
blk_queue_chunk_sectors(q, p->chunk_sectors);
blk_queue_virt_boundary(q, p->virt_boundary_mask);
if (p->attrs & UBLK_ATTR_READ_ONLY)
set_disk_ro(ub->ub_disk, true);
set_capacity(ub->ub_disk, p->dev_sectors);
}
static void ublk_dev_param_discard_apply(struct ublk_device *ub)
{
struct request_queue *q = ub->ub_disk->queue;
const struct ublk_param_discard *p = &ub->params.discard;
q->limits.discard_alignment = p->discard_alignment;
q->limits.discard_granularity = p->discard_granularity;
blk_queue_max_discard_sectors(q, p->max_discard_sectors);
blk_queue_max_write_zeroes_sectors(q,
p->max_write_zeroes_sectors);
blk_queue_max_discard_segments(q, p->max_discard_segments);
}
static int ublk_validate_params(const struct ublk_device *ub)
{
/* basic param is the only one which must be set */
if (ub->params.types & UBLK_PARAM_TYPE_BASIC) {
const struct ublk_param_basic *p = &ub->params.basic;
if (p->logical_bs_shift > PAGE_SHIFT || p->logical_bs_shift < 9)
return -EINVAL;
if (p->logical_bs_shift > p->physical_bs_shift)
return -EINVAL;
if (p->max_sectors > (ub->dev_info.max_io_buf_bytes >> 9))
return -EINVAL;
} else
return -EINVAL;
if (ub->params.types & UBLK_PARAM_TYPE_DISCARD) {
const struct ublk_param_discard *p = &ub->params.discard;
/* So far, only support single segment discard */
if (p->max_discard_sectors && p->max_discard_segments != 1)
return -EINVAL;
if (!p->discard_granularity)
return -EINVAL;
}
/* dev_t is read-only */
if (ub->params.types & UBLK_PARAM_TYPE_DEVT)
return -EINVAL;
return 0;
}
static int ublk_apply_params(struct ublk_device *ub)
{
if (!(ub->params.types & UBLK_PARAM_TYPE_BASIC))
return -EINVAL;
ublk_dev_param_basic_apply(ub);
if (ub->params.types & UBLK_PARAM_TYPE_DISCARD)
ublk_dev_param_discard_apply(ub);
return 0;
}
2023-05-19 09:50:30 +03:00
static inline bool ublk_support_user_copy(const struct ublk_queue *ubq)
{
2023-05-19 09:50:30 +03:00
return ubq->flags & UBLK_F_USER_COPY;
}
static inline bool ublk_need_req_ref(const struct ublk_queue *ubq)
{
2023-05-19 09:50:30 +03:00
/*
* read()/write() is involved in user copy, so request reference
* has to be grabbed
*/
return ublk_support_user_copy(ubq);
}
static inline void ublk_init_req_ref(const struct ublk_queue *ubq,
struct request *req)
{
if (ublk_need_req_ref(ubq)) {
struct ublk_rq_data *data = blk_mq_rq_to_pdu(req);
kref_init(&data->ref);
}
}
static inline bool ublk_get_req_ref(const struct ublk_queue *ubq,
struct request *req)
{
if (ublk_need_req_ref(ubq)) {
struct ublk_rq_data *data = blk_mq_rq_to_pdu(req);
return kref_get_unless_zero(&data->ref);
}
return true;
}
static inline void ublk_put_req_ref(const struct ublk_queue *ubq,
struct request *req)
{
if (ublk_need_req_ref(ubq)) {
struct ublk_rq_data *data = blk_mq_rq_to_pdu(req);
kref_put(&data->ref, ublk_complete_rq);
} else {
__ublk_complete_rq(req);
}
}
static inline bool ublk_need_get_data(const struct ublk_queue *ubq)
{
return ubq->flags & UBLK_F_NEED_GET_DATA;
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
static struct ublk_device *ublk_get_device(struct ublk_device *ub)
{
if (kobject_get_unless_zero(&ub->cdev_dev.kobj))
return ub;
return NULL;
}
static void ublk_put_device(struct ublk_device *ub)
{
put_device(&ub->cdev_dev);
}
static inline struct ublk_queue *ublk_get_queue(struct ublk_device *dev,
int qid)
{
return (struct ublk_queue *)&(dev->__queues[qid * dev->queue_size]);
}
static inline bool ublk_rq_has_data(const struct request *rq)
{
return bio_has_data(rq->bio);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
static inline struct ublksrv_io_desc *ublk_get_iod(struct ublk_queue *ubq,
int tag)
{
return (struct ublksrv_io_desc *)
&(ubq->io_cmd_buf[tag * sizeof(struct ublksrv_io_desc)]);
}
static inline char *ublk_queue_cmd_buf(struct ublk_device *ub, int q_id)
{
return ublk_get_queue(ub, q_id)->io_cmd_buf;
}
static inline int ublk_queue_cmd_buf_size(struct ublk_device *ub, int q_id)
{
struct ublk_queue *ubq = ublk_get_queue(ub, q_id);
return round_up(ubq->q_depth * sizeof(struct ublksrv_io_desc),
PAGE_SIZE);
}
static inline bool ublk_queue_can_use_recovery_reissue(
struct ublk_queue *ubq)
{
return (ubq->flags & UBLK_F_USER_RECOVERY) &&
(ubq->flags & UBLK_F_USER_RECOVERY_REISSUE);
}
static inline bool ublk_queue_can_use_recovery(
struct ublk_queue *ubq)
{
return ubq->flags & UBLK_F_USER_RECOVERY;
}
static inline bool ublk_can_use_recovery(struct ublk_device *ub)
{
return ub->dev_info.flags & UBLK_F_USER_RECOVERY;
}
static void ublk_free_disk(struct gendisk *disk)
{
struct ublk_device *ub = disk->private_data;
clear_bit(UB_STATE_USED, &ub->state);
put_device(&ub->cdev_dev);
}
static void ublk_store_owner_uid_gid(unsigned int *owner_uid,
unsigned int *owner_gid)
{
kuid_t uid;
kgid_t gid;
current_uid_gid(&uid, &gid);
*owner_uid = from_kuid(&init_user_ns, uid);
*owner_gid = from_kgid(&init_user_ns, gid);
}
static int ublk_open(struct gendisk *disk, blk_mode_t mode)
{
struct ublk_device *ub = disk->private_data;
if (capable(CAP_SYS_ADMIN))
return 0;
/*
* If it is one unprivileged device, only owner can open
* the disk. Otherwise it could be one trap made by one
* evil user who grants this disk's privileges to other
* users deliberately.
*
* This way is reasonable too given anyone can create
* unprivileged device, and no need other's grant.
*/
if (ub->dev_info.flags & UBLK_F_UNPRIVILEGED_DEV) {
unsigned int curr_uid, curr_gid;
ublk_store_owner_uid_gid(&curr_uid, &curr_gid);
if (curr_uid != ub->dev_info.owner_uid || curr_gid !=
ub->dev_info.owner_gid)
return -EPERM;
}
return 0;
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
static const struct block_device_operations ub_fops = {
.owner = THIS_MODULE,
.open = ublk_open,
.free_disk = ublk_free_disk,
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
};
#define UBLK_MAX_PIN_PAGES 32
struct ublk_io_iter {
struct page *pages[UBLK_MAX_PIN_PAGES];
struct bio *bio;
struct bvec_iter iter;
};
/* return how many pages are copied */
static void ublk_copy_io_pages(struct ublk_io_iter *data,
size_t total, size_t pg_off, int dir)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
unsigned done = 0;
unsigned pg_idx = 0;
while (done < total) {
struct bio_vec bv = bio_iter_iovec(data->bio, data->iter);
unsigned int bytes = min3(bv.bv_len, (unsigned)total - done,
(unsigned)(PAGE_SIZE - pg_off));
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
void *bv_buf = bvec_kmap_local(&bv);
void *pg_buf = kmap_local_page(data->pages[pg_idx]);
if (dir == ITER_DEST)
memcpy(pg_buf + pg_off, bv_buf, bytes);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
else
memcpy(bv_buf, pg_buf + pg_off, bytes);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
kunmap_local(pg_buf);
kunmap_local(bv_buf);
/* advance page array */
pg_off += bytes;
if (pg_off == PAGE_SIZE) {
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
pg_idx += 1;
pg_off = 0;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
done += bytes;
/* advance bio */
bio_advance_iter_single(data->bio, &data->iter, bytes);
if (!data->iter.bi_size) {
data->bio = data->bio->bi_next;
if (data->bio == NULL)
break;
data->iter = data->bio->bi_iter;
}
}
}
static bool ublk_advance_io_iter(const struct request *req,
struct ublk_io_iter *iter, unsigned int offset)
{
struct bio *bio = req->bio;
for_each_bio(bio) {
if (bio->bi_iter.bi_size > offset) {
iter->bio = bio;
iter->iter = bio->bi_iter;
bio_advance_iter(iter->bio, &iter->iter, offset);
return true;
}
offset -= bio->bi_iter.bi_size;
}
return false;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
/*
* Copy data between request pages and io_iter, and 'offset'
* is the start point of linear offset of request.
*/
static size_t ublk_copy_user_pages(const struct request *req,
unsigned offset, struct iov_iter *uiter, int dir)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
struct ublk_io_iter iter;
size_t done = 0;
if (!ublk_advance_io_iter(req, &iter, offset))
return 0;
while (iov_iter_count(uiter) && iter.bio) {
unsigned nr_pages;
ssize_t len;
size_t off;
int i;
len = iov_iter_get_pages2(uiter, iter.pages,
iov_iter_count(uiter),
UBLK_MAX_PIN_PAGES, &off);
if (len <= 0)
return done;
ublk_copy_io_pages(&iter, len, off, dir);
nr_pages = DIV_ROUND_UP(len + off, PAGE_SIZE);
for (i = 0; i < nr_pages; i++) {
if (dir == ITER_DEST)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
set_page_dirty(iter.pages[i]);
put_page(iter.pages[i]);
}
done += len;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
return done;
}
static inline bool ublk_need_map_req(const struct request *req)
{
return ublk_rq_has_data(req) && req_op(req) == REQ_OP_WRITE;
}
static inline bool ublk_need_unmap_req(const struct request *req)
{
return ublk_rq_has_data(req) && req_op(req) == REQ_OP_READ;
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req,
struct ublk_io *io)
{
const unsigned int rq_bytes = blk_rq_bytes(req);
2023-05-19 09:50:30 +03:00
if (ublk_support_user_copy(ubq))
return rq_bytes;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
/*
* no zero copy, we delay copy WRITE request data into ublksrv
* context and the big benefit is that pinning pages in current
* context is pretty fast, see ublk_pin_user_pages
*/
if (ublk_need_map_req(req)) {
struct iov_iter iter;
struct iovec iov;
const int dir = ITER_DEST;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
import_single_range(dir, u64_to_user_ptr(io->addr), rq_bytes,
&iov, &iter);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
return ublk_copy_user_pages(req, 0, &iter, dir);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
return rq_bytes;
}
static int ublk_unmap_io(const struct ublk_queue *ubq,
const struct request *req,
struct ublk_io *io)
{
const unsigned int rq_bytes = blk_rq_bytes(req);
2023-05-19 09:50:30 +03:00
if (ublk_support_user_copy(ubq))
return rq_bytes;
if (ublk_need_unmap_req(req)) {
struct iov_iter iter;
struct iovec iov;
const int dir = ITER_SOURCE;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
WARN_ON_ONCE(io->res > rq_bytes);
import_single_range(dir, u64_to_user_ptr(io->addr), io->res,
&iov, &iter);
return ublk_copy_user_pages(req, 0, &iter, dir);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
return rq_bytes;
}
static inline unsigned int ublk_req_build_flags(struct request *req)
{
unsigned flags = 0;
if (req->cmd_flags & REQ_FAILFAST_DEV)
flags |= UBLK_IO_F_FAILFAST_DEV;
if (req->cmd_flags & REQ_FAILFAST_TRANSPORT)
flags |= UBLK_IO_F_FAILFAST_TRANSPORT;
if (req->cmd_flags & REQ_FAILFAST_DRIVER)
flags |= UBLK_IO_F_FAILFAST_DRIVER;
if (req->cmd_flags & REQ_META)
flags |= UBLK_IO_F_META;
if (req->cmd_flags & REQ_FUA)
flags |= UBLK_IO_F_FUA;
if (req->cmd_flags & REQ_NOUNMAP)
flags |= UBLK_IO_F_NOUNMAP;
if (req->cmd_flags & REQ_SWAP)
flags |= UBLK_IO_F_SWAP;
return flags;
}
static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
struct ublksrv_io_desc *iod = ublk_get_iod(ubq, req->tag);
struct ublk_io *io = &ubq->ios[req->tag];
u32 ublk_op;
switch (req_op(req)) {
case REQ_OP_READ:
ublk_op = UBLK_IO_OP_READ;
break;
case REQ_OP_WRITE:
ublk_op = UBLK_IO_OP_WRITE;
break;
case REQ_OP_FLUSH:
ublk_op = UBLK_IO_OP_FLUSH;
break;
case REQ_OP_DISCARD:
ublk_op = UBLK_IO_OP_DISCARD;
break;
case REQ_OP_WRITE_ZEROES:
ublk_op = UBLK_IO_OP_WRITE_ZEROES;
break;
default:
return BLK_STS_IOERR;
}
/* need to translate since kernel may change */
iod->op_flags = ublk_op | ublk_req_build_flags(req);
iod->nr_sectors = blk_rq_sectors(req);
iod->start_sector = blk_rq_pos(req);
iod->addr = io->addr;
return BLK_STS_OK;
}
static inline struct ublk_uring_cmd_pdu *ublk_get_uring_cmd_pdu(
struct io_uring_cmd *ioucmd)
{
return (struct ublk_uring_cmd_pdu *)&ioucmd->pdu;
}
static inline bool ubq_daemon_is_dying(struct ublk_queue *ubq)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
return ubq->ubq_daemon->flags & PF_EXITING;
}
/* todo: handle partial completion */
static inline void __ublk_complete_rq(struct request *req)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
struct ublk_queue *ubq = req->mq_hctx->driver_data;
struct ublk_io *io = &ubq->ios[req->tag];
unsigned int unmapped_bytes;
blk_status_t res = BLK_STS_OK;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
/* called from ublk_abort_queue() code path */
if (io->flags & UBLK_IO_FLAG_ABORTED) {
res = BLK_STS_IOERR;
goto exit;
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
/* failed read IO if nothing is read */
if (!io->res && req_op(req) == REQ_OP_READ)
io->res = -EIO;
if (io->res < 0) {
res = errno_to_blk_status(io->res);
goto exit;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
/*
* FLUSH, DISCARD or WRITE_ZEROES usually won't return bytes returned, so end them
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
* directly.
*
* Both the two needn't unmap.
*/
if (req_op(req) != REQ_OP_READ && req_op(req) != REQ_OP_WRITE)
goto exit;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
/* for READ request, writing data in iod->addr to rq buffers */
unmapped_bytes = ublk_unmap_io(ubq, req, io);
/*
* Extremely impossible since we got data filled in just before
*
* Re-read simply for this unlikely case.
*/
if (unlikely(unmapped_bytes < io->res))
io->res = unmapped_bytes;
if (blk_update_request(req, BLK_STS_OK, io->res))
blk_mq_requeue_request(req, true);
else
__blk_mq_end_request(req, BLK_STS_OK);
return;
exit:
blk_mq_end_request(req, res);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
static void ublk_complete_rq(struct kref *ref)
{
struct ublk_rq_data *data = container_of(ref, struct ublk_rq_data,
ref);
struct request *req = blk_mq_rq_from_pdu(data);
__ublk_complete_rq(req);
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
/*
* Since __ublk_rq_task_work always fails requests immediately during
* exiting, __ublk_fail_req() is only called from abort context during
* exiting. So lock is unnecessary.
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
*
* Also aborting may not be started yet, keep in mind that one failed
* request may be issued by block layer again.
*/
static void __ublk_fail_req(struct ublk_queue *ubq, struct ublk_io *io,
struct request *req)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
WARN_ON_ONCE(io->flags & UBLK_IO_FLAG_ACTIVE);
if (!(io->flags & UBLK_IO_FLAG_ABORTED)) {
io->flags |= UBLK_IO_FLAG_ABORTED;
if (ublk_queue_can_use_recovery_reissue(ubq))
blk_mq_requeue_request(req, false);
else
ublk_put_req_ref(ubq, req);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
}
static void ubq_complete_io_cmd(struct ublk_io *io, int res,
unsigned issue_flags)
{
/* mark this cmd owned by ublksrv */
io->flags |= UBLK_IO_FLAG_OWNED_BY_SRV;
/*
* clear ACTIVE since we are done with this sqe/cmd slot
* We can only accept io cmd in case of being not active.
*/
io->flags &= ~UBLK_IO_FLAG_ACTIVE;
/* tell ublksrv one io request is coming */
io_uring_cmd_done(io->cmd, res, 0, issue_flags);
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
#define UBLK_REQUEUE_DELAY_MS 3
static inline void __ublk_abort_rq(struct ublk_queue *ubq,
struct request *rq)
{
/* We cannot process this rq so just requeue it. */
if (ublk_queue_can_use_recovery(ubq))
blk_mq_requeue_request(rq, false);
else
blk_mq_end_request(rq, BLK_STS_IOERR);
mod_delayed_work(system_wq, &ubq->dev->monitor_work, 0);
}
static inline void __ublk_rq_task_work(struct request *req,
unsigned issue_flags)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
struct ublk_queue *ubq = req->mq_hctx->driver_data;
int tag = req->tag;
struct ublk_io *io = &ubq->ios[tag];
unsigned int mapped_bytes;
pr_devel("%s: complete: op %d, qid %d tag %d io_flags %x addr %llx\n",
__func__, io->cmd->cmd_op, ubq->q_id, req->tag, io->flags,
ublk_get_iod(ubq, req->tag)->addr);
/*
* Task is exiting if either:
*
* (1) current != ubq_daemon.
* io_uring_cmd_complete_in_task() tries to run task_work
* in a workqueue if ubq_daemon(cmd's task) is PF_EXITING.
*
* (2) current->flags & PF_EXITING.
*/
if (unlikely(current != ubq->ubq_daemon || current->flags & PF_EXITING)) {
__ublk_abort_rq(ubq, req);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
return;
}
if (ublk_need_get_data(ubq) && ublk_need_map_req(req)) {
/*
* We have not handled UBLK_IO_NEED_GET_DATA command yet,
* so immepdately pass UBLK_IO_RES_NEED_GET_DATA to ublksrv
* and notify it.
*/
if (!(io->flags & UBLK_IO_FLAG_NEED_GET_DATA)) {
io->flags |= UBLK_IO_FLAG_NEED_GET_DATA;
pr_devel("%s: need get data. op %d, qid %d tag %d io_flags %x\n",
__func__, io->cmd->cmd_op, ubq->q_id,
req->tag, io->flags);
ubq_complete_io_cmd(io, UBLK_IO_RES_NEED_GET_DATA, issue_flags);
return;
}
/*
* We have handled UBLK_IO_NEED_GET_DATA command,
* so clear UBLK_IO_FLAG_NEED_GET_DATA now and just
* do the copy work.
*/
io->flags &= ~UBLK_IO_FLAG_NEED_GET_DATA;
/* update iod->addr because ublksrv may have passed a new io buffer */
ublk_get_iod(ubq, req->tag)->addr = io->addr;
pr_devel("%s: update iod->addr: op %d, qid %d tag %d io_flags %x addr %llx\n",
__func__, io->cmd->cmd_op, ubq->q_id, req->tag, io->flags,
ublk_get_iod(ubq, req->tag)->addr);
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
mapped_bytes = ublk_map_io(ubq, req, io);
/* partially mapped, update io descriptor */
if (unlikely(mapped_bytes != blk_rq_bytes(req))) {
/*
* Nothing mapped, retry until we succeed.
*
* We may never succeed in mapping any bytes here because
* of OOM. TODO: reserve one buffer with single page pinned
* for providing forward progress guarantee.
*/
if (unlikely(!mapped_bytes)) {
blk_mq_requeue_request(req, false);
blk_mq_delay_kick_requeue_list(req->q,
UBLK_REQUEUE_DELAY_MS);
return;
}
ublk_get_iod(ubq, req->tag)->nr_sectors =
mapped_bytes >> 9;
}
ublk_init_req_ref(ubq, req);
ubq_complete_io_cmd(io, UBLK_IO_RES_OK, issue_flags);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
static inline void ublk_forward_io_cmds(struct ublk_queue *ubq,
unsigned issue_flags)
{
struct llist_node *io_cmds = llist_del_all(&ubq->io_cmds);
struct ublk_rq_data *data, *tmp;
io_cmds = llist_reverse_order(io_cmds);
llist_for_each_entry_safe(data, tmp, io_cmds, node)
__ublk_rq_task_work(blk_mq_rq_from_pdu(data), issue_flags);
}
static inline void ublk_abort_io_cmds(struct ublk_queue *ubq)
{
struct llist_node *io_cmds = llist_del_all(&ubq->io_cmds);
struct ublk_rq_data *data, *tmp;
llist_for_each_entry_safe(data, tmp, io_cmds, node)
__ublk_abort_rq(ubq, blk_mq_rq_from_pdu(data));
}
static void ublk_rq_task_work_cb(struct io_uring_cmd *cmd, unsigned issue_flags)
{
struct ublk_uring_cmd_pdu *pdu = ublk_get_uring_cmd_pdu(cmd);
struct ublk_queue *ubq = pdu->ubq;
ublk_forward_io_cmds(ubq, issue_flags);
}
static void ublk_queue_cmd(struct ublk_queue *ubq, struct request *rq)
{
struct ublk_rq_data *data = blk_mq_rq_to_pdu(rq);
struct ublk_io *io;
if (!llist_add(&data->node, &ubq->io_cmds))
return;
io = &ubq->ios[rq->tag];
/*
* If the check pass, we know that this is a re-issued request aborted
* previously in monitor_work because the ubq_daemon(cmd's task) is
* PF_EXITING. We cannot call io_uring_cmd_complete_in_task() anymore
* because this ioucmd's io_uring context may be freed now if no inflight
* ioucmd exists. Otherwise we may cause null-deref in ctx->fallback_work.
*
* Note: monitor_work sets UBLK_IO_FLAG_ABORTED and ends this request(releasing
* the tag). Then the request is re-started(allocating the tag) and we are here.
* Since releasing/allocating a tag implies smp_mb(), finding UBLK_IO_FLAG_ABORTED
* guarantees that here is a re-issued request aborted previously.
*/
if (unlikely(io->flags & UBLK_IO_FLAG_ABORTED)) {
ublk_abort_io_cmds(ubq);
} else {
struct io_uring_cmd *cmd = io->cmd;
struct ublk_uring_cmd_pdu *pdu = ublk_get_uring_cmd_pdu(cmd);
pdu->ubq = ubq;
io_uring_cmd_complete_in_task(cmd, ublk_rq_task_work_cb);
}
}
static enum blk_eh_timer_return ublk_timeout(struct request *rq)
{
struct ublk_queue *ubq = rq->mq_hctx->driver_data;
if (ubq->flags & UBLK_F_UNPRIVILEGED_DEV) {
if (!ubq->timeout) {
send_sig(SIGKILL, ubq->ubq_daemon, 0);
ubq->timeout = true;
}
return BLK_EH_DONE;
}
return BLK_EH_RESET_TIMER;
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
static blk_status_t ublk_queue_rq(struct blk_mq_hw_ctx *hctx,
const struct blk_mq_queue_data *bd)
{
struct ublk_queue *ubq = hctx->driver_data;
struct request *rq = bd->rq;
blk_status_t res;
/* fill iod to slot in io cmd buffer */
res = ublk_setup_iod(ubq, rq);
if (unlikely(res != BLK_STS_OK))
return BLK_STS_IOERR;
/* With recovery feature enabled, force_abort is set in
* ublk_stop_dev() before calling del_gendisk(). We have to
* abort all requeued and new rqs here to let del_gendisk()
* move on. Besides, we cannot not call io_uring_cmd_complete_in_task()
* to avoid UAF on io_uring ctx.
*
* Note: force_abort is guaranteed to be seen because it is set
* before request queue is unqiuesced.
*/
if (ublk_queue_can_use_recovery(ubq) && unlikely(ubq->force_abort))
return BLK_STS_IOERR;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
blk_mq_start_request(bd->rq);
if (unlikely(ubq_daemon_is_dying(ubq))) {
__ublk_abort_rq(ubq, rq);
return BLK_STS_OK;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
ublk_queue_cmd(ubq, rq);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
return BLK_STS_OK;
}
static int ublk_init_hctx(struct blk_mq_hw_ctx *hctx, void *driver_data,
unsigned int hctx_idx)
{
struct ublk_device *ub = driver_data;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
struct ublk_queue *ubq = ublk_get_queue(ub, hctx->queue_num);
hctx->driver_data = ubq;
return 0;
}
static const struct blk_mq_ops ublk_mq_ops = {
.queue_rq = ublk_queue_rq,
.init_hctx = ublk_init_hctx,
.timeout = ublk_timeout,
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
};
static int ublk_ch_open(struct inode *inode, struct file *filp)
{
struct ublk_device *ub = container_of(inode->i_cdev,
struct ublk_device, cdev);
if (test_and_set_bit(UB_STATE_OPEN, &ub->state))
return -EBUSY;
filp->private_data = ub;
return 0;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
static int ublk_ch_release(struct inode *inode, struct file *filp)
{
struct ublk_device *ub = filp->private_data;
clear_bit(UB_STATE_OPEN, &ub->state);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
return 0;
}
/* map pre-allocated per-queue cmd buffer to ublksrv daemon */
static int ublk_ch_mmap(struct file *filp, struct vm_area_struct *vma)
{
struct ublk_device *ub = filp->private_data;
size_t sz = vma->vm_end - vma->vm_start;
unsigned max_sz = UBLK_MAX_QUEUE_DEPTH * sizeof(struct ublksrv_io_desc);
unsigned long pfn, end, phys_off = vma->vm_pgoff << PAGE_SHIFT;
int q_id, ret = 0;
ublk_drv: fix lockdep warning ub->mutex is used to protecting reading and writing ub->mm, then the following lockdep warning is triggered. Fix it by using one dedicated spin lock for protecting ub->mm. [1] lockdep warning [ 25.046186] ====================================================== [ 25.048886] WARNING: possible circular locking dependency detected [ 25.051610] 5.19.0-rc4_for-v5.20+ #149 Not tainted [ 25.053665] ------------------------------------------------------ [ 25.056334] ublk/989 is trying to acquire lock: [ 25.058296] ffff975d0329a918 (&disk->open_mutex){+.+.}-{3:3}, at: bd_register_pending_holders+0x2a/0x110 [ 25.063678] [ 25.063678] but task is already holding lock: [ 25.066246] ffff975d1df59708 (&ub->mutex){+.+.}-{3:3}, at: ublk_ctrl_uring_cmd+0x2df/0x730 [ 25.069423] [ 25.069423] which lock already depends on the new lock. [ 25.069423] [ 25.072603] [ 25.072603] the existing dependency chain (in reverse order) is: [ 25.074908] [ 25.074908] -> #3 (&ub->mutex){+.+.}-{3:3}: [ 25.076386] __mutex_lock+0x93/0x870 [ 25.077470] ublk_ch_mmap+0x3a/0x140 [ 25.078494] mmap_region+0x375/0x5a0 [ 25.079386] do_mmap+0x33a/0x530 [ 25.080168] vm_mmap_pgoff+0xb9/0x150 [ 25.080979] ksys_mmap_pgoff+0x184/0x1f0 [ 25.081838] do_syscall_64+0x37/0x80 [ 25.082653] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.083730] [ 25.083730] -> #2 (&mm->mmap_lock#2){++++}-{3:3}: [ 25.084707] __might_fault+0x55/0x80 [ 25.085344] _copy_from_user+0x1e/0xa0 [ 25.086020] get_sg_io_hdr+0x26/0xb0 [ 25.086651] scsi_ioctl+0x42f/0x960 [ 25.087267] sr_block_ioctl+0xe8/0x100 [ 25.087734] blkdev_ioctl+0x134/0x2b0 [ 25.088196] __x64_sys_ioctl+0x8a/0xc0 [ 25.088677] do_syscall_64+0x37/0x80 [ 25.089044] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.089548] [ 25.089548] -> #1 (&cd->lock){+.+.}-{3:3}: [ 25.090072] __mutex_lock+0x93/0x870 [ 25.090452] sr_block_open+0x64/0xe0 [ 25.090837] blkdev_get_whole+0x26/0x90 [ 25.091445] blkdev_get_by_dev.part.0+0x1ce/0x2f0 [ 25.092203] blkdev_open+0x52/0x90 [ 25.092617] do_dentry_open+0x1ca/0x360 [ 25.093499] path_openat+0x78d/0xcb0 [ 25.094136] do_filp_open+0xa1/0x130 [ 25.094759] do_sys_openat2+0x76/0x130 [ 25.095454] __x64_sys_openat+0x5c/0x70 [ 25.096078] do_syscall_64+0x37/0x80 [ 25.096637] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.097304] [ 25.097304] -> #0 (&disk->open_mutex){+.+.}-{3:3}: [ 25.098229] __lock_acquire+0x12e2/0x1f90 [ 25.098789] lock_acquire+0xbf/0x2c0 [ 25.099256] __mutex_lock+0x93/0x870 [ 25.099706] bd_register_pending_holders+0x2a/0x110 [ 25.100246] device_add_disk+0x209/0x370 [ 25.100712] ublk_ctrl_uring_cmd+0x405/0x730 [ 25.101205] io_issue_sqe+0xfe/0x2ac0 [ 25.101665] io_submit_sqes+0x352/0x1820 [ 25.102131] __do_sys_io_uring_enter+0x848/0xdc0 [ 25.102646] do_syscall_64+0x37/0x80 [ 25.103087] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.103640] [ 25.103640] other info that might help us debug this: [ 25.103640] [ 25.104549] Chain exists of: [ 25.104549] &disk->open_mutex --> &mm->mmap_lock#2 --> &ub->mutex [ 25.104549] [ 25.105611] Possible unsafe locking scenario: [ 25.105611] [ 25.106258] CPU0 CPU1 [ 25.106677] ---- ---- [ 25.107100] lock(&ub->mutex); [ 25.107446] lock(&mm->mmap_lock#2); [ 25.108045] lock(&ub->mutex); [ 25.108802] lock(&disk->open_mutex); [ 25.109265] [ 25.109265] *** DEADLOCK *** [ 25.109265] [ 25.110117] 2 locks held by ublk/989: [ 25.110490] #0: ffff975d07bbf8a8 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0x83e/0xdc0 [ 25.111249] #1: ffff975d1df59708 (&ub->mutex){+.+.}-{3:3}, at: ublk_ctrl_uring_cmd+0x2df/0x730 [ 25.111943] [ 25.111943] stack backtrace: [ 25.112557] CPU: 2 PID: 989 Comm: ublk Not tainted 5.19.0-rc4_for-v5.20+ #149 [ 25.113137] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014 [ 25.113792] Call Trace: [ 25.114130] <TASK> [ 25.114417] dump_stack_lvl+0x71/0xa0 [ 25.114771] check_noncircular+0xdf/0x100 [ 25.115137] ? register_lock_class+0x38/0x470 [ 25.115524] __lock_acquire+0x12e2/0x1f90 [ 25.115887] ? find_held_lock+0x2b/0x80 [ 25.116244] lock_acquire+0xbf/0x2c0 [ 25.116590] ? bd_register_pending_holders+0x2a/0x110 [ 25.117009] __mutex_lock+0x93/0x870 [ 25.117362] ? bd_register_pending_holders+0x2a/0x110 [ 25.117780] ? bd_register_pending_holders+0x2a/0x110 [ 25.118201] ? kobject_add+0x71/0x90 [ 25.118546] ? bd_register_pending_holders+0x2a/0x110 [ 25.118958] bd_register_pending_holders+0x2a/0x110 [ 25.119373] device_add_disk+0x209/0x370 [ 25.119732] ublk_ctrl_uring_cmd+0x405/0x730 [ 25.120109] ? rcu_read_lock_sched_held+0x3c/0x70 [ 25.120514] io_issue_sqe+0xfe/0x2ac0 [ 25.120863] io_submit_sqes+0x352/0x1820 [ 25.121228] ? rcu_read_lock_sched_held+0x3c/0x70 [ 25.121626] ? __do_sys_io_uring_enter+0x83e/0xdc0 [ 25.122028] ? find_held_lock+0x2b/0x80 [ 25.122390] ? __do_sys_io_uring_enter+0x848/0xdc0 [ 25.122791] __do_sys_io_uring_enter+0x848/0xdc0 [ 25.123190] ? syscall_enter_from_user_mode+0x20/0x70 [ 25.123606] ? syscall_enter_from_user_mode+0x20/0x70 [ 25.124024] do_syscall_64+0x37/0x80 [ 25.124383] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.124829] RIP: 0033:0x7f120a762af6 [ 25.125223] Code: 45 c1 41 89 c2 41 b9 08 00 00 00 41 83 ca 10 f6 87 d0 00 00 00 01 8b bf cc 00 00 00 44 0f 44 d0 45 31 c0c [ 25.126576] RSP: 002b:00007ffdcb3c5518 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa [ 25.127153] RAX: ffffffffffffffda RBX: 00000000013aef50 RCX: 00007f120a762af6 [ 25.127748] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004 [ 25.128351] RBP: 000000000000000b R08: 0000000000000000 R09: 0000000000000008 [ 25.128956] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcb3c74a6 [ 25.129524] R13: 00000000013aef50 R14: 0000000000000000 R15: 00000000000003df [ 25.130121] </TASK> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220721153117.591394-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-21 18:31:17 +03:00
spin_lock(&ub->mm_lock);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
if (!ub->mm)
ub->mm = current->mm;
if (current->mm != ub->mm)
ret = -EINVAL;
ublk_drv: fix lockdep warning ub->mutex is used to protecting reading and writing ub->mm, then the following lockdep warning is triggered. Fix it by using one dedicated spin lock for protecting ub->mm. [1] lockdep warning [ 25.046186] ====================================================== [ 25.048886] WARNING: possible circular locking dependency detected [ 25.051610] 5.19.0-rc4_for-v5.20+ #149 Not tainted [ 25.053665] ------------------------------------------------------ [ 25.056334] ublk/989 is trying to acquire lock: [ 25.058296] ffff975d0329a918 (&disk->open_mutex){+.+.}-{3:3}, at: bd_register_pending_holders+0x2a/0x110 [ 25.063678] [ 25.063678] but task is already holding lock: [ 25.066246] ffff975d1df59708 (&ub->mutex){+.+.}-{3:3}, at: ublk_ctrl_uring_cmd+0x2df/0x730 [ 25.069423] [ 25.069423] which lock already depends on the new lock. [ 25.069423] [ 25.072603] [ 25.072603] the existing dependency chain (in reverse order) is: [ 25.074908] [ 25.074908] -> #3 (&ub->mutex){+.+.}-{3:3}: [ 25.076386] __mutex_lock+0x93/0x870 [ 25.077470] ublk_ch_mmap+0x3a/0x140 [ 25.078494] mmap_region+0x375/0x5a0 [ 25.079386] do_mmap+0x33a/0x530 [ 25.080168] vm_mmap_pgoff+0xb9/0x150 [ 25.080979] ksys_mmap_pgoff+0x184/0x1f0 [ 25.081838] do_syscall_64+0x37/0x80 [ 25.082653] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.083730] [ 25.083730] -> #2 (&mm->mmap_lock#2){++++}-{3:3}: [ 25.084707] __might_fault+0x55/0x80 [ 25.085344] _copy_from_user+0x1e/0xa0 [ 25.086020] get_sg_io_hdr+0x26/0xb0 [ 25.086651] scsi_ioctl+0x42f/0x960 [ 25.087267] sr_block_ioctl+0xe8/0x100 [ 25.087734] blkdev_ioctl+0x134/0x2b0 [ 25.088196] __x64_sys_ioctl+0x8a/0xc0 [ 25.088677] do_syscall_64+0x37/0x80 [ 25.089044] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.089548] [ 25.089548] -> #1 (&cd->lock){+.+.}-{3:3}: [ 25.090072] __mutex_lock+0x93/0x870 [ 25.090452] sr_block_open+0x64/0xe0 [ 25.090837] blkdev_get_whole+0x26/0x90 [ 25.091445] blkdev_get_by_dev.part.0+0x1ce/0x2f0 [ 25.092203] blkdev_open+0x52/0x90 [ 25.092617] do_dentry_open+0x1ca/0x360 [ 25.093499] path_openat+0x78d/0xcb0 [ 25.094136] do_filp_open+0xa1/0x130 [ 25.094759] do_sys_openat2+0x76/0x130 [ 25.095454] __x64_sys_openat+0x5c/0x70 [ 25.096078] do_syscall_64+0x37/0x80 [ 25.096637] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.097304] [ 25.097304] -> #0 (&disk->open_mutex){+.+.}-{3:3}: [ 25.098229] __lock_acquire+0x12e2/0x1f90 [ 25.098789] lock_acquire+0xbf/0x2c0 [ 25.099256] __mutex_lock+0x93/0x870 [ 25.099706] bd_register_pending_holders+0x2a/0x110 [ 25.100246] device_add_disk+0x209/0x370 [ 25.100712] ublk_ctrl_uring_cmd+0x405/0x730 [ 25.101205] io_issue_sqe+0xfe/0x2ac0 [ 25.101665] io_submit_sqes+0x352/0x1820 [ 25.102131] __do_sys_io_uring_enter+0x848/0xdc0 [ 25.102646] do_syscall_64+0x37/0x80 [ 25.103087] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.103640] [ 25.103640] other info that might help us debug this: [ 25.103640] [ 25.104549] Chain exists of: [ 25.104549] &disk->open_mutex --> &mm->mmap_lock#2 --> &ub->mutex [ 25.104549] [ 25.105611] Possible unsafe locking scenario: [ 25.105611] [ 25.106258] CPU0 CPU1 [ 25.106677] ---- ---- [ 25.107100] lock(&ub->mutex); [ 25.107446] lock(&mm->mmap_lock#2); [ 25.108045] lock(&ub->mutex); [ 25.108802] lock(&disk->open_mutex); [ 25.109265] [ 25.109265] *** DEADLOCK *** [ 25.109265] [ 25.110117] 2 locks held by ublk/989: [ 25.110490] #0: ffff975d07bbf8a8 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0x83e/0xdc0 [ 25.111249] #1: ffff975d1df59708 (&ub->mutex){+.+.}-{3:3}, at: ublk_ctrl_uring_cmd+0x2df/0x730 [ 25.111943] [ 25.111943] stack backtrace: [ 25.112557] CPU: 2 PID: 989 Comm: ublk Not tainted 5.19.0-rc4_for-v5.20+ #149 [ 25.113137] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014 [ 25.113792] Call Trace: [ 25.114130] <TASK> [ 25.114417] dump_stack_lvl+0x71/0xa0 [ 25.114771] check_noncircular+0xdf/0x100 [ 25.115137] ? register_lock_class+0x38/0x470 [ 25.115524] __lock_acquire+0x12e2/0x1f90 [ 25.115887] ? find_held_lock+0x2b/0x80 [ 25.116244] lock_acquire+0xbf/0x2c0 [ 25.116590] ? bd_register_pending_holders+0x2a/0x110 [ 25.117009] __mutex_lock+0x93/0x870 [ 25.117362] ? bd_register_pending_holders+0x2a/0x110 [ 25.117780] ? bd_register_pending_holders+0x2a/0x110 [ 25.118201] ? kobject_add+0x71/0x90 [ 25.118546] ? bd_register_pending_holders+0x2a/0x110 [ 25.118958] bd_register_pending_holders+0x2a/0x110 [ 25.119373] device_add_disk+0x209/0x370 [ 25.119732] ublk_ctrl_uring_cmd+0x405/0x730 [ 25.120109] ? rcu_read_lock_sched_held+0x3c/0x70 [ 25.120514] io_issue_sqe+0xfe/0x2ac0 [ 25.120863] io_submit_sqes+0x352/0x1820 [ 25.121228] ? rcu_read_lock_sched_held+0x3c/0x70 [ 25.121626] ? __do_sys_io_uring_enter+0x83e/0xdc0 [ 25.122028] ? find_held_lock+0x2b/0x80 [ 25.122390] ? __do_sys_io_uring_enter+0x848/0xdc0 [ 25.122791] __do_sys_io_uring_enter+0x848/0xdc0 [ 25.123190] ? syscall_enter_from_user_mode+0x20/0x70 [ 25.123606] ? syscall_enter_from_user_mode+0x20/0x70 [ 25.124024] do_syscall_64+0x37/0x80 [ 25.124383] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 25.124829] RIP: 0033:0x7f120a762af6 [ 25.125223] Code: 45 c1 41 89 c2 41 b9 08 00 00 00 41 83 ca 10 f6 87 d0 00 00 00 01 8b bf cc 00 00 00 44 0f 44 d0 45 31 c0c [ 25.126576] RSP: 002b:00007ffdcb3c5518 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa [ 25.127153] RAX: ffffffffffffffda RBX: 00000000013aef50 RCX: 00007f120a762af6 [ 25.127748] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004 [ 25.128351] RBP: 000000000000000b R08: 0000000000000000 R09: 0000000000000008 [ 25.128956] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcb3c74a6 [ 25.129524] R13: 00000000013aef50 R14: 0000000000000000 R15: 00000000000003df [ 25.130121] </TASK> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220721153117.591394-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-21 18:31:17 +03:00
spin_unlock(&ub->mm_lock);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
if (ret)
return ret;
if (vma->vm_flags & VM_WRITE)
return -EPERM;
end = UBLKSRV_CMD_BUF_OFFSET + ub->dev_info.nr_hw_queues * max_sz;
if (phys_off < UBLKSRV_CMD_BUF_OFFSET || phys_off >= end)
return -EINVAL;
q_id = (phys_off - UBLKSRV_CMD_BUF_OFFSET) / max_sz;
pr_devel("%s: qid %d, pid %d, addr %lx pg_off %lx sz %lu\n",
__func__, q_id, current->pid, vma->vm_start,
phys_off, (unsigned long)sz);
if (sz != ublk_queue_cmd_buf_size(ub, q_id))
return -EINVAL;
pfn = virt_to_phys(ublk_queue_cmd_buf(ub, q_id)) >> PAGE_SHIFT;
return remap_pfn_range(vma, vma->vm_start, pfn, sz, vma->vm_page_prot);
}
static void ublk_commit_completion(struct ublk_device *ub,
const struct ublksrv_io_cmd *ub_cmd)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
u32 qid = ub_cmd->q_id, tag = ub_cmd->tag;
struct ublk_queue *ubq = ublk_get_queue(ub, qid);
struct ublk_io *io = &ubq->ios[tag];
struct request *req;
/* now this cmd slot is owned by nbd driver */
io->flags &= ~UBLK_IO_FLAG_OWNED_BY_SRV;
io->res = ub_cmd->result;
/* find the io request and complete */
req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
if (req && likely(!blk_should_fake_timeout(req->q)))
ublk_put_req_ref(ubq, req);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
/*
* When ->ubq_daemon is exiting, either new request is ended immediately,
* or any queued io command is drained, so it is safe to abort queue
* lockless
*/
static void ublk_abort_queue(struct ublk_device *ub, struct ublk_queue *ubq)
{
int i;
if (!ublk_get_device(ub))
return;
for (i = 0; i < ubq->q_depth; i++) {
struct ublk_io *io = &ubq->ios[i];
if (!(io->flags & UBLK_IO_FLAG_ACTIVE)) {
struct request *rq;
/*
* Either we fail the request or ublk_rq_task_work_fn
* will do it
*/
rq = blk_mq_tag_to_rq(ub->tag_set.tags[ubq->q_id], i);
if (rq)
__ublk_fail_req(ubq, io, rq);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
}
ublk_put_device(ub);
}
static void ublk_daemon_monitor_work(struct work_struct *work)
{
struct ublk_device *ub =
container_of(work, struct ublk_device, monitor_work.work);
int i;
for (i = 0; i < ub->dev_info.nr_hw_queues; i++) {
struct ublk_queue *ubq = ublk_get_queue(ub, i);
if (ubq_daemon_is_dying(ubq)) {
if (ublk_queue_can_use_recovery(ubq))
schedule_work(&ub->quiesce_work);
else
schedule_work(&ub->stop_work);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
/* abort queue is for making forward progress */
ublk_abort_queue(ub, ubq);
}
}
/*
* We can't schedule monitor work after ub's state is not UBLK_S_DEV_LIVE.
* after ublk_remove() or __ublk_quiesce_dev() is started.
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
*
* No need ub->mutex, monitor work are canceled after state is marked
* as not LIVE, so new state is observed reliably.
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
*/
if (ub->dev_info.state == UBLK_S_DEV_LIVE)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
schedule_delayed_work(&ub->monitor_work,
UBLK_DAEMON_MONITOR_PERIOD);
}
static inline bool ublk_queue_ready(struct ublk_queue *ubq)
{
return ubq->nr_io_ready == ubq->q_depth;
}
static void ublk_cmd_cancel_cb(struct io_uring_cmd *cmd, unsigned issue_flags)
{
io_uring_cmd_done(cmd, UBLK_IO_RES_ABORT, 0, issue_flags);
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
static void ublk_cancel_queue(struct ublk_queue *ubq)
{
int i;
if (!ublk_queue_ready(ubq))
return;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
for (i = 0; i < ubq->q_depth; i++) {
struct ublk_io *io = &ubq->ios[i];
if (io->flags & UBLK_IO_FLAG_ACTIVE)
io_uring_cmd_complete_in_task(io->cmd,
ublk_cmd_cancel_cb);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
/* all io commands are canceled */
ubq->nr_io_ready = 0;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
/* Cancel all pending commands, must be called after del_gendisk() returns */
static void ublk_cancel_dev(struct ublk_device *ub)
{
int i;
for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
ublk_cancel_queue(ublk_get_queue(ub, i));
}
static bool ublk_check_inflight_rq(struct request *rq, void *data)
{
bool *idle = data;
if (blk_mq_request_started(rq)) {
*idle = false;
return false;
}
return true;
}
static void ublk_wait_tagset_rqs_idle(struct ublk_device *ub)
{
bool idle;
WARN_ON_ONCE(!blk_queue_quiesced(ub->ub_disk->queue));
while (true) {
idle = true;
blk_mq_tagset_busy_iter(&ub->tag_set,
ublk_check_inflight_rq, &idle);
if (idle)
break;
msleep(UBLK_REQUEUE_DELAY_MS);
}
}
static void __ublk_quiesce_dev(struct ublk_device *ub)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
pr_devel("%s: quiesce ub: dev_id %d state %s\n",
__func__, ub->dev_info.dev_id,
ub->dev_info.state == UBLK_S_DEV_LIVE ?
"LIVE" : "QUIESCED");
blk_mq_quiesce_queue(ub->ub_disk->queue);
ublk_wait_tagset_rqs_idle(ub);
ub->dev_info.state = UBLK_S_DEV_QUIESCED;
ublk_cancel_dev(ub);
/* we are going to release task_struct of ubq_daemon and resets
* ->ubq_daemon to NULL. So in monitor_work, check on ubq_daemon causes UAF.
* Besides, monitor_work is not necessary in QUIESCED state since we have
* already scheduled quiesce_work and quiesced all ubqs.
*
* Do not let monitor_work schedule itself if state it QUIESCED. And we cancel
* it here and re-schedule it in END_USER_RECOVERY to avoid UAF.
*/
cancel_delayed_work_sync(&ub->monitor_work);
}
static void ublk_quiesce_work_fn(struct work_struct *work)
{
struct ublk_device *ub =
container_of(work, struct ublk_device, quiesce_work);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
mutex_lock(&ub->mutex);
if (ub->dev_info.state != UBLK_S_DEV_LIVE)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
goto unlock;
__ublk_quiesce_dev(ub);
unlock:
mutex_unlock(&ub->mutex);
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
static void ublk_unquiesce_dev(struct ublk_device *ub)
{
int i;
pr_devel("%s: unquiesce ub: dev_id %d state %s\n",
__func__, ub->dev_info.dev_id,
ub->dev_info.state == UBLK_S_DEV_LIVE ?
"LIVE" : "QUIESCED");
/* quiesce_work has run. We let requeued rqs be aborted
* before running fallback_wq. "force_abort" must be seen
* after request queue is unqiuesced. Then del_gendisk()
* can move on.
*/
for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
ublk_get_queue(ub, i)->force_abort = true;
blk_mq_unquiesce_queue(ub->ub_disk->queue);
/* We may have requeued some rqs in ublk_quiesce_queue() */
blk_mq_kick_requeue_list(ub->ub_disk->queue);
}
static void ublk_stop_dev(struct ublk_device *ub)
{
mutex_lock(&ub->mutex);
if (ub->dev_info.state == UBLK_S_DEV_DEAD)
goto unlock;
if (ublk_can_use_recovery(ub)) {
if (ub->dev_info.state == UBLK_S_DEV_LIVE)
__ublk_quiesce_dev(ub);
ublk_unquiesce_dev(ub);
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
del_gendisk(ub->ub_disk);
ub->dev_info.state = UBLK_S_DEV_DEAD;
ub->dev_info.ublksrv_pid = -1;
put_disk(ub->ub_disk);
ub->ub_disk = NULL;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
unlock:
ublk_cancel_dev(ub);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
mutex_unlock(&ub->mutex);
cancel_delayed_work_sync(&ub->monitor_work);
}
/* device can only be started after all IOs are ready */
static void ublk_mark_io_ready(struct ublk_device *ub, struct ublk_queue *ubq)
{
mutex_lock(&ub->mutex);
ubq->nr_io_ready++;
if (ublk_queue_ready(ubq)) {
ubq->ubq_daemon = current;
get_task_struct(ubq->ubq_daemon);
ub->nr_queues_ready++;
if (capable(CAP_SYS_ADMIN))
ub->nr_privileged_daemon++;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues)
complete_all(&ub->completion);
mutex_unlock(&ub->mutex);
}
static void ublk_handle_need_get_data(struct ublk_device *ub, int q_id,
int tag)
{
struct ublk_queue *ubq = ublk_get_queue(ub, q_id);
struct request *req = blk_mq_tag_to_rq(ub->tag_set.tags[q_id], tag);
ublk_queue_cmd(ubq, req);
}
static inline int ublk_check_cmd_op(u32 cmd_op)
{
u32 ioc_type = _IOC_TYPE(cmd_op);
if (!IS_ENABLED(CONFIG_BLKDEV_UBLK_LEGACY_OPCODES) && ioc_type != 'u')
return -EOPNOTSUPP;
if (ioc_type != 'u' && ioc_type != 0)
return -EOPNOTSUPP;
return 0;
}
static inline void ublk_fill_io_cmd(struct ublk_io *io,
struct io_uring_cmd *cmd, unsigned long buf_addr)
{
io->cmd = cmd;
io->flags |= UBLK_IO_FLAG_ACTIVE;
io->addr = buf_addr;
}
static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
unsigned int issue_flags,
for-6.4/io_uring-2023-05-07 -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmRXkp8QHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpsH3EADZ4ex4vvc2/giYjRYTdyda00GIdYGiSZaZ OBW59OBYJfDjsS99Z2U4638shyqM3rA6BwzvWD6hPUTShD7PUddIKDaanpCYBs+x GhcDhzeJxARjsp/5qZPQ4r3Hdp+kWRnOFu1BSniCEdWt43J6AOm0l5duuNxl1db5 Jz+BkSgF1pICAVB5YfSPDShyFiDfc0qcv3rHZo/rVRjwmX3x4x+OVr97zbZInnH4 fm2vcv2e3Dc8uQEB0XFEyBWNeC8hdhTNe60t1y3MlILaPjHrQlzl5lkQFZ9dtLG6 /FDK+bD6Ex8t6SQnnQGrLa9q4vQYA6zlT5u/wdvzAkakmrSxt6phf23U1TbyZSQ8 clSg6MSuyJAW7YhiT3OqAsNMvBZ5g/nKHjLxfkAe86N9YIrMebZW9GDF+fWf0q0K em7O4XPehjkCXKclCInMv2bkv+/pncrd84D7Jt3OmCPljBL6oXfWF3vJJQ6FaY+t G3tNxl1hMHqwX8uaaSqyeuMYAEYizZa+ebMmHJwm/151d0EKylAOh3i6O1e4bpk3 Kn5irF6pfTV1g1TcmY3fOwNgMffcHc9Y4E8bXxMJAN9WiHDuopgn2C9+MrJ+KRrx pLN7VD9UK/5yFzHSMBhyM8lm0/oTIhfTVgb+WyuHmJLcRhAnyNy9RrIBhSD0AoH+ UMyOexZR8w== =l7Mo -----END PGP SIGNATURE----- Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux Pull more io_uring updates from Jens Axboe: "Nothing major in here, just two different parts: - A small series from Breno that enables passing the full SQE down for ->uring_cmd(). This is a prerequisite for enabling full network socket operations. Queued up a bit late because of some stylistic concerns that got resolved, would be nice to have this in 6.4-rc1 so the dependent work will be easier to handle for 6.5. - Fix for the huge page coalescing, which was a regression introduced in the 6.3 kernel release (Tobias)" * tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux: io_uring: Remove unnecessary BUILD_BUG_ON io_uring: Pass whole sqe to commands io_uring: Create a helper to return the SQE size io_uring/rsrc: check for nonconsecutive pages
2023-05-07 20:00:09 +03:00
const struct ublksrv_io_cmd *ub_cmd)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
struct ublk_device *ub = cmd->file->private_data;
struct ublk_queue *ubq;
struct ublk_io *io;
u32 cmd_op = cmd->cmd_op;
unsigned tag = ub_cmd->tag;
int ret = -EINVAL;
struct request *req;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
pr_devel("%s: received: cmd op %d queue %d tag %d result %d\n",
__func__, cmd->cmd_op, ub_cmd->q_id, tag,
ub_cmd->result);
if (ub_cmd->q_id >= ub->dev_info.nr_hw_queues)
goto out;
ubq = ublk_get_queue(ub, ub_cmd->q_id);
if (!ubq || ub_cmd->q_id != ubq->q_id)
goto out;
if (ubq->ubq_daemon && ubq->ubq_daemon != current)
goto out;
if (tag >= ubq->q_depth)
goto out;
io = &ubq->ios[tag];
/* there is pending io cmd, something must be wrong */
if (io->flags & UBLK_IO_FLAG_ACTIVE) {
ret = -EBUSY;
goto out;
}
/*
* ensure that the user issues UBLK_IO_NEED_GET_DATA
* iff the driver have set the UBLK_IO_FLAG_NEED_GET_DATA.
*/
if ((!!(io->flags & UBLK_IO_FLAG_NEED_GET_DATA))
^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
goto out;
2023-05-19 09:50:30 +03:00
if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
ret = -EINVAL;
goto out;
}
ret = ublk_check_cmd_op(cmd_op);
if (ret)
goto out;
ret = -EINVAL;
switch (_IOC_NR(cmd_op)) {
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
case UBLK_IO_FETCH_REQ:
/* UBLK_IO_FETCH_REQ is only allowed before queue is setup */
if (ublk_queue_ready(ubq)) {
ret = -EBUSY;
goto out;
}
/*
* The io is being handled by server, so COMMIT_RQ is expected
* instead of FETCH_REQ
*/
if (io->flags & UBLK_IO_FLAG_OWNED_BY_SRV)
goto out;
2023-05-19 09:50:30 +03:00
if (!ublk_support_user_copy(ubq)) {
/*
* FETCH_RQ has to provide IO buffer if NEED GET
* DATA is not enabled
*/
if (!ub_cmd->addr && !ublk_need_get_data(ubq))
goto out;
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
ublk_fill_io_cmd(io, cmd, ub_cmd->addr);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
ublk_mark_io_ready(ub, ubq);
break;
case UBLK_IO_COMMIT_AND_FETCH_REQ:
req = blk_mq_tag_to_rq(ub->tag_set.tags[ub_cmd->q_id], tag);
2023-05-19 09:50:30 +03:00
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
if (!(io->flags & UBLK_IO_FLAG_OWNED_BY_SRV))
goto out;
2023-05-19 09:50:30 +03:00
if (!ublk_support_user_copy(ubq)) {
/*
* COMMIT_AND_FETCH_REQ has to provide IO buffer if
* NEED GET DATA is not enabled or it is Read IO.
*/
if (!ub_cmd->addr && (!ublk_need_get_data(ubq) ||
req_op(req) == REQ_OP_READ))
goto out;
}
ublk_fill_io_cmd(io, cmd, ub_cmd->addr);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
ublk_commit_completion(ub, ub_cmd);
break;
case UBLK_IO_NEED_GET_DATA:
if (!(io->flags & UBLK_IO_FLAG_OWNED_BY_SRV))
goto out;
ublk_fill_io_cmd(io, cmd, ub_cmd->addr);
ublk_handle_need_get_data(ub, ub_cmd->q_id, ub_cmd->tag);
break;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
default:
goto out;
}
return -EIOCBQUEUED;
out:
io_uring_cmd_done(cmd, ret, 0, issue_flags);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
pr_devel("%s: complete: cmd op %d, tag %d ret %x io_flags %x\n",
__func__, cmd_op, tag, ret, io->flags);
return -EIOCBQUEUED;
}
static inline struct request *__ublk_check_and_get_req(struct ublk_device *ub,
struct ublk_queue *ubq, int tag, size_t offset)
{
struct request *req;
if (!ublk_need_req_ref(ubq))
return NULL;
req = blk_mq_tag_to_rq(ub->tag_set.tags[ubq->q_id], tag);
if (!req)
return NULL;
if (!ublk_get_req_ref(ubq, req))
return NULL;
if (unlikely(!blk_mq_request_started(req) || req->tag != tag))
goto fail_put;
if (!ublk_rq_has_data(req))
goto fail_put;
if (offset > blk_rq_bytes(req))
goto fail_put;
return req;
fail_put:
ublk_put_req_ref(ubq, req);
return NULL;
}
static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
{
/*
* Not necessary for async retry, but let's keep it simple and always
* copy the values to avoid any potential reuse.
*/
for-6.4/io_uring-2023-05-07 -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmRXkp8QHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpsH3EADZ4ex4vvc2/giYjRYTdyda00GIdYGiSZaZ OBW59OBYJfDjsS99Z2U4638shyqM3rA6BwzvWD6hPUTShD7PUddIKDaanpCYBs+x GhcDhzeJxARjsp/5qZPQ4r3Hdp+kWRnOFu1BSniCEdWt43J6AOm0l5duuNxl1db5 Jz+BkSgF1pICAVB5YfSPDShyFiDfc0qcv3rHZo/rVRjwmX3x4x+OVr97zbZInnH4 fm2vcv2e3Dc8uQEB0XFEyBWNeC8hdhTNe60t1y3MlILaPjHrQlzl5lkQFZ9dtLG6 /FDK+bD6Ex8t6SQnnQGrLa9q4vQYA6zlT5u/wdvzAkakmrSxt6phf23U1TbyZSQ8 clSg6MSuyJAW7YhiT3OqAsNMvBZ5g/nKHjLxfkAe86N9YIrMebZW9GDF+fWf0q0K em7O4XPehjkCXKclCInMv2bkv+/pncrd84D7Jt3OmCPljBL6oXfWF3vJJQ6FaY+t G3tNxl1hMHqwX8uaaSqyeuMYAEYizZa+ebMmHJwm/151d0EKylAOh3i6O1e4bpk3 Kn5irF6pfTV1g1TcmY3fOwNgMffcHc9Y4E8bXxMJAN9WiHDuopgn2C9+MrJ+KRrx pLN7VD9UK/5yFzHSMBhyM8lm0/oTIhfTVgb+WyuHmJLcRhAnyNy9RrIBhSD0AoH+ UMyOexZR8w== =l7Mo -----END PGP SIGNATURE----- Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux Pull more io_uring updates from Jens Axboe: "Nothing major in here, just two different parts: - A small series from Breno that enables passing the full SQE down for ->uring_cmd(). This is a prerequisite for enabling full network socket operations. Queued up a bit late because of some stylistic concerns that got resolved, would be nice to have this in 6.4-rc1 so the dependent work will be easier to handle for 6.5. - Fix for the huge page coalescing, which was a regression introduced in the 6.3 kernel release (Tobias)" * tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux: io_uring: Remove unnecessary BUILD_BUG_ON io_uring: Pass whole sqe to commands io_uring: Create a helper to return the SQE size io_uring/rsrc: check for nonconsecutive pages
2023-05-07 20:00:09 +03:00
const struct ublksrv_io_cmd *ub_src = io_uring_sqe_cmd(cmd->sqe);
const struct ublksrv_io_cmd ub_cmd = {
.q_id = READ_ONCE(ub_src->q_id),
.tag = READ_ONCE(ub_src->tag),
.result = READ_ONCE(ub_src->result),
.addr = READ_ONCE(ub_src->addr)
};
return __ublk_ch_uring_cmd(cmd, issue_flags, &ub_cmd);
}
static inline bool ublk_check_ubuf_dir(const struct request *req,
int ubuf_dir)
{
/* copy ubuf to request pages */
if (req_op(req) == REQ_OP_READ && ubuf_dir == ITER_SOURCE)
return true;
/* copy request pages to ubuf */
if (req_op(req) == REQ_OP_WRITE && ubuf_dir == ITER_DEST)
return true;
return false;
}
static struct request *ublk_check_and_get_req(struct kiocb *iocb,
struct iov_iter *iter, size_t *off, int dir)
{
struct ublk_device *ub = iocb->ki_filp->private_data;
struct ublk_queue *ubq;
struct request *req;
size_t buf_off;
u16 tag, q_id;
if (!ub)
return ERR_PTR(-EACCES);
if (!user_backed_iter(iter))
return ERR_PTR(-EACCES);
if (ub->dev_info.state == UBLK_S_DEV_DEAD)
return ERR_PTR(-EACCES);
tag = ublk_pos_to_tag(iocb->ki_pos);
q_id = ublk_pos_to_hwq(iocb->ki_pos);
buf_off = ublk_pos_to_buf_off(iocb->ki_pos);
if (q_id >= ub->dev_info.nr_hw_queues)
return ERR_PTR(-EINVAL);
ubq = ublk_get_queue(ub, q_id);
if (!ubq)
return ERR_PTR(-EINVAL);
if (tag >= ubq->q_depth)
return ERR_PTR(-EINVAL);
req = __ublk_check_and_get_req(ub, ubq, tag, buf_off);
if (!req)
return ERR_PTR(-EINVAL);
if (!req->mq_hctx || !req->mq_hctx->driver_data)
goto fail;
if (!ublk_check_ubuf_dir(req, dir))
goto fail;
*off = buf_off;
return req;
fail:
ublk_put_req_ref(ubq, req);
return ERR_PTR(-EACCES);
}
static ssize_t ublk_ch_read_iter(struct kiocb *iocb, struct iov_iter *to)
{
struct ublk_queue *ubq;
struct request *req;
size_t buf_off;
size_t ret;
req = ublk_check_and_get_req(iocb, to, &buf_off, ITER_DEST);
if (IS_ERR(req))
return PTR_ERR(req);
ret = ublk_copy_user_pages(req, buf_off, to, ITER_DEST);
ubq = req->mq_hctx->driver_data;
ublk_put_req_ref(ubq, req);
return ret;
}
static ssize_t ublk_ch_write_iter(struct kiocb *iocb, struct iov_iter *from)
{
struct ublk_queue *ubq;
struct request *req;
size_t buf_off;
size_t ret;
req = ublk_check_and_get_req(iocb, from, &buf_off, ITER_SOURCE);
if (IS_ERR(req))
return PTR_ERR(req);
ret = ublk_copy_user_pages(req, buf_off, from, ITER_SOURCE);
ubq = req->mq_hctx->driver_data;
ublk_put_req_ref(ubq, req);
return ret;
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
static const struct file_operations ublk_ch_fops = {
.owner = THIS_MODULE,
.open = ublk_ch_open,
.release = ublk_ch_release,
.llseek = no_llseek,
.read_iter = ublk_ch_read_iter,
.write_iter = ublk_ch_write_iter,
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
.uring_cmd = ublk_ch_uring_cmd,
.mmap = ublk_ch_mmap,
};
static void ublk_deinit_queue(struct ublk_device *ub, int q_id)
{
int size = ublk_queue_cmd_buf_size(ub, q_id);
struct ublk_queue *ubq = ublk_get_queue(ub, q_id);
if (ubq->ubq_daemon)
put_task_struct(ubq->ubq_daemon);
if (ubq->io_cmd_buf)
free_pages((unsigned long)ubq->io_cmd_buf, get_order(size));
}
static int ublk_init_queue(struct ublk_device *ub, int q_id)
{
struct ublk_queue *ubq = ublk_get_queue(ub, q_id);
gfp_t gfp_flags = GFP_KERNEL | __GFP_ZERO;
void *ptr;
int size;
ubq->flags = ub->dev_info.flags;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
ubq->q_id = q_id;
ubq->q_depth = ub->dev_info.queue_depth;
size = ublk_queue_cmd_buf_size(ub, q_id);
ptr = (void *) __get_free_pages(gfp_flags, get_order(size));
if (!ptr)
return -ENOMEM;
ubq->io_cmd_buf = ptr;
ubq->dev = ub;
return 0;
}
static void ublk_deinit_queues(struct ublk_device *ub)
{
int nr_queues = ub->dev_info.nr_hw_queues;
int i;
if (!ub->__queues)
return;
for (i = 0; i < nr_queues; i++)
ublk_deinit_queue(ub, i);
kfree(ub->__queues);
}
static int ublk_init_queues(struct ublk_device *ub)
{
int nr_queues = ub->dev_info.nr_hw_queues;
int depth = ub->dev_info.queue_depth;
int ubq_size = sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io);
int i, ret = -ENOMEM;
ub->queue_size = ubq_size;
ub->__queues = kcalloc(nr_queues, ubq_size, GFP_KERNEL);
if (!ub->__queues)
return ret;
for (i = 0; i < nr_queues; i++) {
if (ublk_init_queue(ub, i))
goto fail;
}
init_completion(&ub->completion);
return 0;
fail:
ublk_deinit_queues(ub);
return ret;
}
static int ublk_alloc_dev_number(struct ublk_device *ub, int idx)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
int i = idx;
int err;
spin_lock(&ublk_idr_lock);
/* allocate id, if @id >= 0, we're requesting that specific id */
if (i >= 0) {
err = idr_alloc(&ublk_index_idr, ub, i, i + 1, GFP_NOWAIT);
if (err == -ENOSPC)
err = -EEXIST;
} else {
err = idr_alloc(&ublk_index_idr, ub, 0, 0, GFP_NOWAIT);
}
spin_unlock(&ublk_idr_lock);
if (err >= 0)
ub->ub_number = err;
return err;
}
static void ublk_free_dev_number(struct ublk_device *ub)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
spin_lock(&ublk_idr_lock);
idr_remove(&ublk_index_idr, ub->ub_number);
wake_up_all(&ublk_idr_wq);
spin_unlock(&ublk_idr_lock);
}
static void ublk_cdev_rel(struct device *dev)
{
struct ublk_device *ub = container_of(dev, struct ublk_device, cdev_dev);
blk_mq_free_tag_set(&ub->tag_set);
ublk_deinit_queues(ub);
ublk_free_dev_number(ub);
mutex_destroy(&ub->mutex);
kfree(ub);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
static int ublk_add_chdev(struct ublk_device *ub)
{
struct device *dev = &ub->cdev_dev;
int minor = ub->ub_number;
int ret;
dev->parent = ublk_misc.this_device;
dev->devt = MKDEV(MAJOR(ublk_chr_devt), minor);
dev->class = &ublk_chr_class;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
dev->release = ublk_cdev_rel;
device_initialize(dev);
ret = dev_set_name(dev, "ublkc%d", minor);
if (ret)
goto fail;
cdev_init(&ub->cdev, &ublk_ch_fops);
ret = cdev_device_add(&ub->cdev, dev);
if (ret)
goto fail;
ublks_added++;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
return 0;
fail:
put_device(dev);
return ret;
}
static void ublk_stop_work_fn(struct work_struct *work)
{
struct ublk_device *ub =
container_of(work, struct ublk_device, stop_work);
ublk_stop_dev(ub);
}
/* align max io buffer size with PAGE_SIZE */
static void ublk_align_max_io_size(struct ublk_device *ub)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
unsigned int max_io_bytes = ub->dev_info.max_io_buf_bytes;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
ub->dev_info.max_io_buf_bytes =
round_down(max_io_bytes, PAGE_SIZE);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
static int ublk_add_tag_set(struct ublk_device *ub)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
ub->tag_set.ops = &ublk_mq_ops;
ub->tag_set.nr_hw_queues = ub->dev_info.nr_hw_queues;
ub->tag_set.queue_depth = ub->dev_info.queue_depth;
ub->tag_set.numa_node = NUMA_NO_NODE;
ub->tag_set.cmd_size = sizeof(struct ublk_rq_data);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
ub->tag_set.flags = BLK_MQ_F_SHOULD_MERGE;
ub->tag_set.driver_data = ub;
return blk_mq_alloc_tag_set(&ub->tag_set);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
static void ublk_remove(struct ublk_device *ub)
{
ublk_stop_dev(ub);
cancel_work_sync(&ub->stop_work);
cancel_work_sync(&ub->quiesce_work);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
cdev_device_del(&ub->cdev, &ub->cdev_dev);
put_device(&ub->cdev_dev);
ublks_added--;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
static struct ublk_device *ublk_get_device_from_id(int idx)
{
struct ublk_device *ub = NULL;
if (idx < 0)
return NULL;
spin_lock(&ublk_idr_lock);
ub = idr_find(&ublk_index_idr, idx);
if (ub)
ub = ublk_get_device(ub);
spin_unlock(&ublk_idr_lock);
return ub;
}
static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
int ublksrv_pid = (int)header->data[0];
struct gendisk *disk;
int ret = -EINVAL;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
if (ublksrv_pid <= 0)
return -EINVAL;
if (wait_for_completion_interruptible(&ub->completion) != 0)
return -EINTR;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
schedule_delayed_work(&ub->monitor_work, UBLK_DAEMON_MONITOR_PERIOD);
mutex_lock(&ub->mutex);
if (ub->dev_info.state == UBLK_S_DEV_LIVE ||
test_bit(UB_STATE_USED, &ub->state)) {
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
ret = -EEXIST;
goto out_unlock;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
disk = blk_mq_alloc_disk(&ub->tag_set, NULL);
if (IS_ERR(disk)) {
ret = PTR_ERR(disk);
goto out_unlock;
}
sprintf(disk->disk_name, "ublkb%d", ub->ub_number);
disk->fops = &ub_fops;
disk->private_data = ub;
ub->dev_info.ublksrv_pid = ublksrv_pid;
ub->ub_disk = disk;
ret = ublk_apply_params(ub);
if (ret)
goto out_put_disk;
/* don't probe partitions if any one ubq daemon is un-trusted */
if (ub->nr_privileged_daemon != ub->nr_queues_ready)
set_bit(GD_SUPPRESS_PART_SCAN, &disk->state);
get_device(&ub->cdev_dev);
ub->dev_info.state = UBLK_S_DEV_LIVE;
ret = add_disk(disk);
if (ret) {
/*
* Has to drop the reference since ->free_disk won't be
* called in case of add_disk failure.
*/
ub->dev_info.state = UBLK_S_DEV_DEAD;
ublk_put_device(ub);
goto out_put_disk;
}
set_bit(UB_STATE_USED, &ub->state);
out_put_disk:
if (ret)
put_disk(disk);
out_unlock:
mutex_unlock(&ub->mutex);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
return ret;
}
static int ublk_ctrl_get_queue_affinity(struct ublk_device *ub,
struct io_uring_cmd *cmd)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
void __user *argp = (void __user *)(unsigned long)header->addr;
cpumask_var_t cpumask;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
unsigned long queue;
unsigned int retlen;
unsigned int i;
int ret;
if (header->len * BITS_PER_BYTE < nr_cpu_ids)
return -EINVAL;
if (header->len & (sizeof(unsigned long)-1))
return -EINVAL;
if (!header->addr)
return -EINVAL;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
queue = header->data[0];
if (queue >= ub->dev_info.nr_hw_queues)
return -EINVAL;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
if (!zalloc_cpumask_var(&cpumask, GFP_KERNEL))
return -ENOMEM;
for_each_possible_cpu(i) {
if (ub->tag_set.map[HCTX_TYPE_DEFAULT].mq_map[i] == queue)
cpumask_set_cpu(i, cpumask);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
ret = -EFAULT;
retlen = min_t(unsigned short, header->len, cpumask_size());
if (copy_to_user(argp, cpumask, retlen))
goto out_free_cpumask;
if (retlen != header->len &&
clear_user(argp + retlen, header->len - retlen))
goto out_free_cpumask;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
ret = 0;
out_free_cpumask:
free_cpumask_var(cpumask);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
return ret;
}
static inline void ublk_dump_dev_info(struct ublksrv_ctrl_dev_info *info)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
pr_devel("%s: dev id %d flags %llx\n", __func__,
info->dev_id, info->flags);
pr_devel("\t nr_hw_queues %d queue_depth %d\n",
info->nr_hw_queues, info->queue_depth);
}
static int ublk_ctrl_add_dev(struct io_uring_cmd *cmd)
{
const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
void __user *argp = (void __user *)(unsigned long)header->addr;
struct ublksrv_ctrl_dev_info info;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
struct ublk_device *ub;
int ret = -EINVAL;
if (header->len < sizeof(info) || !header->addr)
return -EINVAL;
if (header->queue_id != (u16)-1) {
pr_warn("%s: queue_id is wrong %x\n",
__func__, header->queue_id);
return -EINVAL;
}
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
if (copy_from_user(&info, argp, sizeof(info)))
return -EFAULT;
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
if (capable(CAP_SYS_ADMIN))
info.flags &= ~UBLK_F_UNPRIVILEGED_DEV;
else if (!(info.flags & UBLK_F_UNPRIVILEGED_DEV))
return -EPERM;
/*
* unprivileged device can't be trusted, but RECOVERY and
* RECOVERY_REISSUE still may hang error handling, so can't
* support recovery features for unprivileged ublk now
*
* TODO: provide forward progress for RECOVERY handler, so that
* unprivileged device can benefit from it
*/
if (info.flags & UBLK_F_UNPRIVILEGED_DEV)
info.flags &= ~(UBLK_F_USER_RECOVERY_REISSUE |
UBLK_F_USER_RECOVERY);
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
/* the created device is always owned by current user */
ublk_store_owner_uid_gid(&info.owner_uid, &info.owner_gid);
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
if (header->dev_id != info.dev_id) {
pr_warn("%s: dev id not match %u %u\n",
__func__, header->dev_id, info.dev_id);
return -EINVAL;
}
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
ublk_dump_dev_info(&info);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
ret = mutex_lock_killable(&ublk_ctl_mutex);
if (ret)
return ret;
ret = -EACCES;
if (ublks_added >= ublks_max)
goto out_unlock;
ret = -ENOMEM;
ub = kzalloc(sizeof(*ub), GFP_KERNEL);
if (!ub)
goto out_unlock;
mutex_init(&ub->mutex);
spin_lock_init(&ub->mm_lock);
INIT_WORK(&ub->quiesce_work, ublk_quiesce_work_fn);
INIT_WORK(&ub->stop_work, ublk_stop_work_fn);
INIT_DELAYED_WORK(&ub->monitor_work, ublk_daemon_monitor_work);
ret = ublk_alloc_dev_number(ub, header->dev_id);
if (ret < 0)
goto out_free_ub;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
memcpy(&ub->dev_info, &info, sizeof(info));
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
/* update device id */
ub->dev_info.dev_id = ub->ub_number;
/*
* 64bit flags will be copied back to userspace as feature
* negotiation result, so have to clear flags which driver
* doesn't support yet, then userspace can get correct flags
* (features) to handle.
*/
ub->dev_info.flags &= UBLK_F_ALL;
ub->dev_info.flags |= UBLK_F_CMD_IOCTL_ENCODE |
UBLK_F_URING_CMD_COMP_IN_TASK;
2023-05-19 09:50:30 +03:00
/* GET_DATA isn't needed any more with USER_COPY */
if (ub->dev_info.flags & UBLK_F_USER_COPY)
ub->dev_info.flags &= ~UBLK_F_NEED_GET_DATA;
/* We are not ready to support zero copy */
ub->dev_info.flags &= ~UBLK_F_SUPPORT_ZERO_COPY;
ub->dev_info.nr_hw_queues = min_t(unsigned int,
ub->dev_info.nr_hw_queues, nr_cpu_ids);
ublk_align_max_io_size(ub);
ret = ublk_init_queues(ub);
if (ret)
goto out_free_dev_number;
ret = ublk_add_tag_set(ub);
if (ret)
goto out_deinit_queues;
ret = -EFAULT;
if (copy_to_user(argp, &ub->dev_info, sizeof(info)))
goto out_free_tag_set;
/*
* Add the char dev so that ublksrv daemon can be setup.
* ublk_add_chdev() will cleanup everything if it fails.
*/
ret = ublk_add_chdev(ub);
goto out_unlock;
out_free_tag_set:
blk_mq_free_tag_set(&ub->tag_set);
out_deinit_queues:
ublk_deinit_queues(ub);
out_free_dev_number:
ublk_free_dev_number(ub);
out_free_ub:
mutex_destroy(&ub->mutex);
kfree(ub);
out_unlock:
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
mutex_unlock(&ublk_ctl_mutex);
return ret;
}
static inline bool ublk_idr_freed(int id)
{
void *ptr;
spin_lock(&ublk_idr_lock);
ptr = idr_find(&ublk_index_idr, id);
spin_unlock(&ublk_idr_lock);
return ptr == NULL;
}
static int ublk_ctrl_del_dev(struct ublk_device **p_ub)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
struct ublk_device *ub = *p_ub;
int idx = ub->ub_number;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
int ret;
ret = mutex_lock_killable(&ublk_ctl_mutex);
if (ret)
return ret;
if (!test_bit(UB_STATE_DELETED, &ub->state)) {
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
ublk_remove(ub);
set_bit(UB_STATE_DELETED, &ub->state);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
/* Mark the reference as consumed */
*p_ub = NULL;
ublk_put_device(ub);
mutex_unlock(&ublk_ctl_mutex);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
/*
* Wait until the idr is removed, then it can be reused after
* DEL_DEV command is returned.
*
* If we returns because of user interrupt, future delete command
* may come:
*
* - the device number isn't freed, this device won't or needn't
* be deleted again, since UB_STATE_DELETED is set, and device
* will be released after the last reference is dropped
*
* - the device number is freed already, we will not find this
* device via ublk_get_device_from_id()
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
*/
if (wait_event_interruptible(ublk_idr_wq, ublk_idr_freed(idx)))
return -EINTR;
return 0;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
}
static inline void ublk_ctrl_cmd_dump(struct io_uring_cmd *cmd)
{
const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
pr_devel("%s: cmd_op %x, dev id %d qid %d data %llx buf %llx len %u\n",
__func__, cmd->cmd_op, header->dev_id, header->queue_id,
header->data[0], header->addr, header->len);
}
static int ublk_ctrl_stop_dev(struct ublk_device *ub)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
ublk_stop_dev(ub);
cancel_work_sync(&ub->stop_work);
cancel_work_sync(&ub->quiesce_work);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
return 0;
}
static int ublk_ctrl_get_dev_info(struct ublk_device *ub,
struct io_uring_cmd *cmd)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
{
const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
void __user *argp = (void __user *)(unsigned long)header->addr;
if (header->len < sizeof(struct ublksrv_ctrl_dev_info) || !header->addr)
return -EINVAL;
if (copy_to_user(argp, &ub->dev_info, sizeof(ub->dev_info)))
return -EFAULT;
return 0;
}
/* TYPE_DEVT is readonly, so fill it up before returning to userspace */
static void ublk_ctrl_fill_params_devt(struct ublk_device *ub)
{
ub->params.devt.char_major = MAJOR(ub->cdev_dev.devt);
ub->params.devt.char_minor = MINOR(ub->cdev_dev.devt);
if (ub->ub_disk) {
ub->params.devt.disk_major = MAJOR(disk_devt(ub->ub_disk));
ub->params.devt.disk_minor = MINOR(disk_devt(ub->ub_disk));
} else {
ub->params.devt.disk_major = 0;
ub->params.devt.disk_minor = 0;
}
ub->params.types |= UBLK_PARAM_TYPE_DEVT;
}
static int ublk_ctrl_get_params(struct ublk_device *ub,
struct io_uring_cmd *cmd)
{
const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
void __user *argp = (void __user *)(unsigned long)header->addr;
struct ublk_params_header ph;
int ret;
if (header->len <= sizeof(ph) || !header->addr)
return -EINVAL;
if (copy_from_user(&ph, argp, sizeof(ph)))
return -EFAULT;
if (ph.len > header->len || !ph.len)
return -EINVAL;
if (ph.len > sizeof(struct ublk_params))
ph.len = sizeof(struct ublk_params);
mutex_lock(&ub->mutex);
ublk_ctrl_fill_params_devt(ub);
if (copy_to_user(argp, &ub->params, ph.len))
ret = -EFAULT;
else
ret = 0;
mutex_unlock(&ub->mutex);
return ret;
}
static int ublk_ctrl_set_params(struct ublk_device *ub,
struct io_uring_cmd *cmd)
{
const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
void __user *argp = (void __user *)(unsigned long)header->addr;
struct ublk_params_header ph;
int ret = -EFAULT;
if (header->len <= sizeof(ph) || !header->addr)
return -EINVAL;
if (copy_from_user(&ph, argp, sizeof(ph)))
return -EFAULT;
if (ph.len > header->len || !ph.len || !ph.types)
return -EINVAL;
if (ph.len > sizeof(struct ublk_params))
ph.len = sizeof(struct ublk_params);
/* parameters can only be changed when device isn't live */
mutex_lock(&ub->mutex);
if (ub->dev_info.state == UBLK_S_DEV_LIVE) {
ret = -EACCES;
} else if (copy_from_user(&ub->params, argp, ph.len)) {
ret = -EFAULT;
} else {
/* clear all we don't support yet */
ub->params.types &= UBLK_PARAM_TYPE_ALL;
ret = ublk_validate_params(ub);
if (ret)
ub->params.types = 0;
}
mutex_unlock(&ub->mutex);
return ret;
}
static void ublk_queue_reinit(struct ublk_device *ub, struct ublk_queue *ubq)
{
int i;
WARN_ON_ONCE(!(ubq->ubq_daemon && ubq_daemon_is_dying(ubq)));
/* All old ioucmds have to be completed */
WARN_ON_ONCE(ubq->nr_io_ready);
/* old daemon is PF_EXITING, put it now */
put_task_struct(ubq->ubq_daemon);
/* We have to reset it to NULL, otherwise ub won't accept new FETCH_REQ */
ubq->ubq_daemon = NULL;
ubq->timeout = false;
for (i = 0; i < ubq->q_depth; i++) {
struct ublk_io *io = &ubq->ios[i];
/* forget everything now and be ready for new FETCH_REQ */
io->flags = 0;
io->cmd = NULL;
io->addr = 0;
}
}
static int ublk_ctrl_start_recovery(struct ublk_device *ub,
struct io_uring_cmd *cmd)
{
const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
int ret = -EINVAL;
int i;
mutex_lock(&ub->mutex);
if (!ublk_can_use_recovery(ub))
goto out_unlock;
/*
* START_RECOVERY is only allowd after:
*
* (1) UB_STATE_OPEN is not set, which means the dying process is exited
* and related io_uring ctx is freed so file struct of /dev/ublkcX is
* released.
*
* (2) UBLK_S_DEV_QUIESCED is set, which means the quiesce_work:
* (a)has quiesced request queue
* (b)has requeued every inflight rqs whose io_flags is ACTIVE
* (c)has requeued/aborted every inflight rqs whose io_flags is NOT ACTIVE
* (d)has completed/camceled all ioucmds owned by ther dying process
*/
if (test_bit(UB_STATE_OPEN, &ub->state) ||
ub->dev_info.state != UBLK_S_DEV_QUIESCED) {
ret = -EBUSY;
goto out_unlock;
}
pr_devel("%s: start recovery for dev id %d.\n", __func__, header->dev_id);
for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
ublk_queue_reinit(ub, ublk_get_queue(ub, i));
/* set to NULL, otherwise new ubq_daemon cannot mmap the io_cmd_buf */
ub->mm = NULL;
ub->nr_queues_ready = 0;
ub->nr_privileged_daemon = 0;
init_completion(&ub->completion);
ret = 0;
out_unlock:
mutex_unlock(&ub->mutex);
return ret;
}
static int ublk_ctrl_end_recovery(struct ublk_device *ub,
struct io_uring_cmd *cmd)
{
const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
int ublksrv_pid = (int)header->data[0];
int ret = -EINVAL;
pr_devel("%s: Waiting for new ubq_daemons(nr: %d) are ready, dev id %d...\n",
__func__, ub->dev_info.nr_hw_queues, header->dev_id);
/* wait until new ubq_daemon sending all FETCH_REQ */
if (wait_for_completion_interruptible(&ub->completion))
return -EINTR;
pr_devel("%s: All new ubq_daemons(nr: %d) are ready, dev id %d\n",
__func__, ub->dev_info.nr_hw_queues, header->dev_id);
mutex_lock(&ub->mutex);
if (!ublk_can_use_recovery(ub))
goto out_unlock;
if (ub->dev_info.state != UBLK_S_DEV_QUIESCED) {
ret = -EBUSY;
goto out_unlock;
}
ub->dev_info.ublksrv_pid = ublksrv_pid;
pr_devel("%s: new ublksrv_pid %d, dev id %d\n",
__func__, ublksrv_pid, header->dev_id);
blk_mq_unquiesce_queue(ub->ub_disk->queue);
pr_devel("%s: queue unquiesced, dev id %d.\n",
__func__, header->dev_id);
blk_mq_kick_requeue_list(ub->ub_disk->queue);
ub->dev_info.state = UBLK_S_DEV_LIVE;
schedule_delayed_work(&ub->monitor_work, UBLK_DAEMON_MONITOR_PERIOD);
ret = 0;
out_unlock:
mutex_unlock(&ub->mutex);
return ret;
}
static int ublk_ctrl_get_features(struct io_uring_cmd *cmd)
{
const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
void __user *argp = (void __user *)(unsigned long)header->addr;
u64 features = UBLK_F_ALL & ~UBLK_F_SUPPORT_ZERO_COPY;
if (header->len != UBLK_FEATURES_LEN || !header->addr)
return -EINVAL;
if (copy_to_user(argp, &features, UBLK_FEATURES_LEN))
return -EFAULT;
return 0;
}
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
/*
* All control commands are sent via /dev/ublk-control, so we have to check
* the destination device's permission
*/
static int ublk_char_dev_permission(struct ublk_device *ub,
const char *dev_path, int mask)
{
int err;
struct path path;
struct kstat stat;
err = kern_path(dev_path, LOOKUP_FOLLOW, &path);
if (err)
return err;
err = vfs_getattr(&path, &stat, STATX_TYPE, AT_STATX_SYNC_AS_STAT);
if (err)
goto exit;
err = -EPERM;
if (stat.rdev != ub->cdev_dev.devt || !S_ISCHR(stat.mode))
goto exit;
for-6.3/block-2023-02-16 -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmPvfncQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpob2EADXJxcr2jjYHm/7cjKkyuVX8fr80dNdMeuY JFdsjG1k6Uj73BVhQQWYTcs/PsrWBHWRsv6uz4WgOELj55eXmf5Q0kJszyUeJW33 /DjqLvtoppVcYf80xE13wKvCfn73BjwQo6xkGM0qAYn15eaXiD/Ax3xC6eJlsBeK PEw7EJyhacbSxZa/1D2B6+mqII1jUQWProTCc3udZ4JHi3WvdWa3Rda0qCqHl4a1 +K2aP2YTFIRPxBzfMNa/CafWVIFubTdht+4Ds6R60RImzB9e0VUBfcsiUyW5Zg7L Fwv7ptXuWrALwVNdW56Oz1QikBxn2pdRR2HMLwKJW1MD8kP9r8LMm2jV5Rhiwe0B OQsGRYkOzBvw+bxeP5fvk0iPGVMz6ActH4gkraA5QdLqayDaFYOadlhqz0uRo5SH Fb42Vl658K/MHDSIk8U58TNkmrsIJsBGohXI9DOGINPPvv3XOPi4Q1HmXkGRmii0 y+lNU/QEGh7xXXew29SPP76uQpQaYfC7NxXCMw/OpOMwehzjsjshmM2lpxi8zsgt PJUmfHv5qxCplNmTJXmUpmX7sS7550HUdu9FJb13DM+gzKg8bk9jWVuLrzqrVlG5 1hKWEl1+heg1heRfaIuJVLbPI0au6Sb4uqhih/PHyrP9TWIoAruDbDJM65GKTxyE 2uEgcHzHQw== =poRc -----END PGP SIGNATURE----- Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux Pull block updates from Jens Axboe: - NVMe updates via Christoph: - Small improvements to the logging functionality (Amit Engel) - Authentication cleanups (Hannes Reinecke) - Cleanup and optimize the DMA mapping cod in the PCIe driver (Keith Busch) - Work around the command effects for Format NVM (Keith Busch) - Misc cleanups (Keith Busch, Christoph Hellwig) - Fix and cleanup freeing single sgl (Keith Busch) - MD updates via Song: - Fix a rare crash during the takeover process - Don't update recovery_cp when curr_resync is ACTIVE - Free writes_pending in md_stop - Change active_io to percpu - Updates to drbd, inching us closer to unifying the out-of-tree driver with the in-tree one (Andreas, Christoph, Lars, Robert) - BFQ update adding support for multi-actuator drives (Paolo, Federico, Davide) - Make brd compliant with REQ_NOWAIT (me) - Fix for IOPOLL and queue entering, fixing stalled IO waiting on timeouts (me) - Fix for REQ_NOWAIT with multiple bios (me) - Fix memory leak in blktrace cleanup (Greg) - Clean up sbitmap and fix a potential hang (Kemeng) - Clean up some bits in BFQ, and fix a bug in the request injection (Kemeng) - Clean up the request allocation and issue code, and fix some bugs related to that (Kemeng) - ublk updates and fixes: - Add support for unprivileged ublk (Ming) - Improve device deletion handling (Ming) - Misc (Liu, Ziyang) - s390 dasd fixes (Alexander, Qiheng) - Improve utility of request caching and fixes (Anuj, Xiao) - zoned cleanups (Pankaj) - More constification for kobjs (Thomas) - blk-iocost cleanups (Yu) - Remove bio splitting from drivers that don't need it (Christoph) - Switch blk-cgroups to use struct gendisk. Some of this is now incomplete as select late reverts were done. (Christoph) - Add bvec initialization helpers, and convert callers to use that rather than open-coding it (Christoph) - Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin, Matthew, Ulf, Zhong) * tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits) brd: use radix_tree_maybe_preload instead of radix_tree_preload block: use proper return value from bio_failfast() block: bio-integrity: Copy flags when bio_integrity_payload is cloned block: Fix io statistics for cgroup in throttle path brd: mark as nowait compatible brd: check for REQ_NOWAIT and set correct page allocation mask brd: return 0/-error from brd_insert_page() block: sync mixed merged request's failfast with 1st bio's Revert "blk-cgroup: pin the gendisk in struct blkcg_gq" Revert "blk-cgroup: pass a gendisk to blkg_lookup" Revert "blk-cgroup: delay blk-cgroup initialization until add_disk" Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release" Revert "blk-cgroup: move the cgroup information to struct gendisk" nvme-pci: remove iod use_sgls nvme-pci: fix freeing single sgl block: ublk: check IO buffer based on flag need_get_data s390/dasd: Fix potential memleak in dasd_eckd_init() s390/dasd: sort out physical vs virtual pointers usage block: Remove the ALLOC_CACHE_SLACK constant block: make kobj_type structures constant ...
2023-02-21 01:27:21 +03:00
err = inode_permission(&nop_mnt_idmap,
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
d_backing_inode(path.dentry), mask);
exit:
path_put(&path);
return err;
}
static int ublk_ctrl_uring_cmd_permission(struct ublk_device *ub,
struct io_uring_cmd *cmd)
{
struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)io_uring_sqe_cmd(cmd->sqe);
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
bool unprivileged = ub->dev_info.flags & UBLK_F_UNPRIVILEGED_DEV;
void __user *argp = (void __user *)(unsigned long)header->addr;
char *dev_path = NULL;
int ret = 0;
int mask;
if (!unprivileged) {
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
/*
* The new added command of UBLK_CMD_GET_DEV_INFO2 includes
* char_dev_path in payload too, since userspace may not
* know if the specified device is created as unprivileged
* mode.
*/
if (_IOC_NR(cmd->cmd_op) != UBLK_CMD_GET_DEV_INFO2)
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
return 0;
}
/*
* User has to provide the char device path for unprivileged ublk
*
* header->addr always points to the dev path buffer, and
* header->dev_path_len records length of dev path buffer.
*/
if (!header->dev_path_len || header->dev_path_len > PATH_MAX)
return -EINVAL;
if (header->len < header->dev_path_len)
return -EINVAL;
dev_path = kmalloc(header->dev_path_len + 1, GFP_KERNEL);
if (!dev_path)
return -ENOMEM;
ret = -EFAULT;
if (copy_from_user(dev_path, argp, header->dev_path_len))
goto exit;
dev_path[header->dev_path_len] = 0;
ret = -EINVAL;
switch (_IOC_NR(cmd->cmd_op)) {
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
case UBLK_CMD_GET_DEV_INFO:
case UBLK_CMD_GET_DEV_INFO2:
case UBLK_CMD_GET_QUEUE_AFFINITY:
case UBLK_CMD_GET_PARAMS:
case (_IOC_NR(UBLK_U_CMD_GET_FEATURES)):
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
mask = MAY_READ;
break;
case UBLK_CMD_START_DEV:
case UBLK_CMD_STOP_DEV:
case UBLK_CMD_ADD_DEV:
case UBLK_CMD_DEL_DEV:
case UBLK_CMD_SET_PARAMS:
case UBLK_CMD_START_USER_RECOVERY:
case UBLK_CMD_END_USER_RECOVERY:
mask = MAY_READ | MAY_WRITE;
break;
default:
goto exit;
}
ret = ublk_char_dev_permission(ub, dev_path, mask);
if (!ret) {
header->len -= header->dev_path_len;
header->addr += header->dev_path_len;
}
pr_devel("%s: dev id %d cmd_op %x uid %d gid %d path %s ret %d\n",
__func__, ub->ub_number, cmd->cmd_op,
ub->dev_info.owner_uid, ub->dev_info.owner_gid,
dev_path, ret);
exit:
kfree(dev_path);
return ret;
}
static int ublk_ctrl_uring_cmd(struct io_uring_cmd *cmd,
unsigned int issue_flags)
{
const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
struct ublk_device *ub = NULL;
u32 cmd_op = cmd->cmd_op;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
int ret = -EINVAL;
if (issue_flags & IO_URING_F_NONBLOCK)
return -EAGAIN;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
ublk_ctrl_cmd_dump(cmd);
if (!(issue_flags & IO_URING_F_SQE128))
goto out;
ret = ublk_check_cmd_op(cmd_op);
if (ret)
goto out;
if (cmd_op == UBLK_U_CMD_GET_FEATURES) {
ret = ublk_ctrl_get_features(cmd);
goto out;
}
if (_IOC_NR(cmd_op) != UBLK_CMD_ADD_DEV) {
ret = -ENODEV;
ub = ublk_get_device_from_id(header->dev_id);
if (!ub)
goto out;
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
ret = ublk_ctrl_uring_cmd_permission(ub, cmd);
if (ret)
goto put_dev;
}
switch (_IOC_NR(cmd_op)) {
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
case UBLK_CMD_START_DEV:
ret = ublk_ctrl_start_dev(ub, cmd);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
break;
case UBLK_CMD_STOP_DEV:
ret = ublk_ctrl_stop_dev(ub);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
break;
case UBLK_CMD_GET_DEV_INFO:
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
case UBLK_CMD_GET_DEV_INFO2:
ret = ublk_ctrl_get_dev_info(ub, cmd);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
break;
case UBLK_CMD_ADD_DEV:
ret = ublk_ctrl_add_dev(cmd);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
break;
case UBLK_CMD_DEL_DEV:
ret = ublk_ctrl_del_dev(&ub);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
break;
case UBLK_CMD_GET_QUEUE_AFFINITY:
ret = ublk_ctrl_get_queue_affinity(ub, cmd);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
break;
case UBLK_CMD_GET_PARAMS:
ret = ublk_ctrl_get_params(ub, cmd);
break;
case UBLK_CMD_SET_PARAMS:
ret = ublk_ctrl_set_params(ub, cmd);
break;
case UBLK_CMD_START_USER_RECOVERY:
ret = ublk_ctrl_start_recovery(ub, cmd);
break;
case UBLK_CMD_END_USER_RECOVERY:
ret = ublk_ctrl_end_recovery(ub, cmd);
break;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
default:
ret = -ENOTSUPP;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
break;
}
ublk_drv: add mechanism for supporting unprivileged ublk device unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-06 07:17:11 +03:00
put_dev:
if (ub)
ublk_put_device(ub);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
out:
io_uring_cmd_done(cmd, ret, 0, issue_flags);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
pr_devel("%s: cmd done ret %d cmd_op %x, dev id %d qid %d\n",
__func__, ret, cmd->cmd_op, header->dev_id, header->queue_id);
return -EIOCBQUEUED;
}
static const struct file_operations ublk_ctl_fops = {
.open = nonseekable_open,
.uring_cmd = ublk_ctrl_uring_cmd,
.owner = THIS_MODULE,
.llseek = noop_llseek,
};
static struct miscdevice ublk_misc = {
.minor = MISC_DYNAMIC_MINOR,
.name = "ublk-control",
.fops = &ublk_ctl_fops,
};
static int __init ublk_init(void)
{
int ret;
BUILD_BUG_ON((u64)UBLKSRV_IO_BUF_OFFSET +
UBLKSRV_IO_BUF_TOTAL_SIZE < UBLKSRV_IO_BUF_OFFSET);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
init_waitqueue_head(&ublk_idr_wq);
ret = misc_register(&ublk_misc);
if (ret)
return ret;
ret = alloc_chrdev_region(&ublk_chr_devt, 0, UBLK_MINORS, "ublk-char");
if (ret)
goto unregister_mis;
ret = class_register(&ublk_chr_class);
if (ret)
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
goto free_chrdev_region;
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
return 0;
free_chrdev_region:
unregister_chrdev_region(ublk_chr_devt, UBLK_MINORS);
unregister_mis:
misc_deregister(&ublk_misc);
return ret;
}
static void __exit ublk_exit(void)
{
struct ublk_device *ub;
int id;
idr_for_each_entry(&ublk_index_idr, ub, id)
ublk_remove(ub);
class_unregister(&ublk_chr_class);
misc_deregister(&ublk_misc);
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
idr_destroy(&ublk_index_idr);
unregister_chrdev_region(ublk_chr_devt, UBLK_MINORS);
}
module_init(ublk_init);
module_exit(ublk_exit);
module_param(ublks_max, int, 0444);
MODULE_PARM_DESC(ublks_max, "max number of ublk devices allowed to add(default: 64)");
ublk_drv: add io_uring based userspace block driver This is the driver part of userspace block driver(ublk driver), the other part is userspace daemon part(ublksrv)[1]. The two parts communicate by io_uring's IORING_OP_URING_CMD with one shared cmd buffer for storing io command, and the buffer is read only for ublksrv, each io command is indexed by io request tag directly, and is written by ublk driver. For example, when one READ io request is submitted to ublk block driver, ublk driver stores the io command into cmd buffer first, then completes one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to ublk driver beforehand by ublksrv for getting notification of any new io request, and each URING_CMD is associated with one io request by tag. After ublksrv gets the io command, it translates and handles the ublk io request, such as, for the ublk-loop target, ublksrv translates the request into same request on another file or disk, like the kernel loop block driver. In ublksrv's implementation, the io is still handled by io_uring, and share same ring with IORING_OP_URING_CMD command. When the target io request is done, the same IORING_OP_URING_CMD is issued to ublk driver for both committing io request result and getting future notification of new io request. Another thing done by ublk driver is to copy data between kernel io request and ublksrv's io buffer: 1) before ubsrv handles WRITE request, copy the request's data into ublksrv's userspace io buffer, so that ublksrv can handle the write request 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer into this READ request, then ublk driver can complete the READ request Zero copy may be switched if mm is ready to support it. ublk driver doesn't handle any logic of the specific user space driver, so it is small/simple enough. [1] ublksrv https://github.com/ming1/ubdsrv Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-13 17:07:10 +03:00
MODULE_AUTHOR("Ming Lei <ming.lei@redhat.com>");
MODULE_LICENSE("GPL");