linux/crypto/testmgr.c

5692 lines
145 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Algorithm testing framework and tests.
*
* Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
* Copyright (c) 2002 Jean-Francois Dive <jef@linuxbe.org>
* Copyright (c) 2007 Nokia Siemens Networks
* Copyright (c) 2008 Herbert Xu <herbert@gondor.apana.org.au>
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
* Copyright (c) 2019 Google LLC
*
* Updated RFC4106 AES-GCM testing.
* Authors: Aidan O'Mahony (aidan.o.mahony@intel.com)
* Adrian Hoban <adrian.hoban@intel.com>
* Gabriele Paoloni <gabriele.paoloni@intel.com>
* Tadeusz Struk (tadeusz.struk@intel.com)
* Copyright (c) 2010, Intel Corporation.
*/
#include <crypto/aead.h>
#include <crypto/hash.h>
#include <crypto/skcipher.h>
#include <linux/err.h>
#include <linux/fips.h>
#include <linux/module.h>
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
#include <linux/once.h>
#include <linux/random.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/uio.h>
#include <crypto/rng.h>
#include <crypto/drbg.h>
#include <crypto/akcipher.h>
#include <crypto/kpp.h>
#include <crypto/acompress.h>
#include <crypto/internal/simd.h>
#include "internal.h"
static bool notests;
module_param(notests, bool, 0644);
MODULE_PARM_DESC(notests, "disable crypto self-tests");
static bool panic_on_fail;
module_param(panic_on_fail, bool, 0444);
#ifdef CONFIG_CRYPTO_MANAGER_EXTRA_TESTS
static bool noextratests;
module_param(noextratests, bool, 0644);
MODULE_PARM_DESC(noextratests, "disable expensive crypto self-tests");
static unsigned int fuzz_iterations = 100;
module_param(fuzz_iterations, uint, 0644);
MODULE_PARM_DESC(fuzz_iterations, "number of fuzz test iterations");
DEFINE_PER_CPU(bool, crypto_simd_disabled_for_test);
EXPORT_PER_CPU_SYMBOL_GPL(crypto_simd_disabled_for_test);
#endif
#ifdef CONFIG_CRYPTO_MANAGER_DISABLE_TESTS
/* a perfect nop */
int alg_test(const char *driver, const char *alg, u32 type, u32 mask)
{
return 0;
}
#else
#include "testmgr.h"
/*
* Need slab memory for testing (size in number of pages).
*/
#define XBUFSIZE 8
/*
* Used by test_cipher()
*/
#define ENCRYPT 1
#define DECRYPT 0
struct aead_test_suite {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
const struct aead_testvec *vecs;
unsigned int count;
/*
* Set if trying to decrypt an inauthentic ciphertext with this
* algorithm might result in EINVAL rather than EBADMSG, due to other
* validation the algorithm does on the inputs such as length checks.
*/
unsigned int einval_allowed : 1;
/*
* Set if this algorithm requires that the IV be located at the end of
* the AAD buffer, in addition to being given in the normal way. The
* behavior when the two IV copies differ is implementation-defined.
*/
unsigned int aad_iv : 1;
};
struct cipher_test_suite {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
const struct cipher_testvec *vecs;
unsigned int count;
};
struct comp_test_suite {
struct {
const struct comp_testvec *vecs;
unsigned int count;
} comp, decomp;
};
struct hash_test_suite {
const struct hash_testvec *vecs;
unsigned int count;
};
struct cprng_test_suite {
const struct cprng_testvec *vecs;
unsigned int count;
};
struct drbg_test_suite {
const struct drbg_testvec *vecs;
unsigned int count;
};
struct akcipher_test_suite {
const struct akcipher_testvec *vecs;
unsigned int count;
};
struct kpp_test_suite {
const struct kpp_testvec *vecs;
unsigned int count;
};
struct alg_test_desc {
const char *alg;
const char *generic_driver;
int (*test)(const struct alg_test_desc *desc, const char *driver,
u32 type, u32 mask);
int fips_allowed; /* set if alg is allowed in fips mode */
union {
struct aead_test_suite aead;
struct cipher_test_suite cipher;
struct comp_test_suite comp;
struct hash_test_suite hash;
struct cprng_test_suite cprng;
struct drbg_test_suite drbg;
struct akcipher_test_suite akcipher;
struct kpp_test_suite kpp;
} suite;
};
static void hexdump(unsigned char *buf, unsigned int len)
{
print_hex_dump(KERN_CONT, "", DUMP_PREFIX_OFFSET,
16, 1,
buf, len, false);
}
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
static int __testmgr_alloc_buf(char *buf[XBUFSIZE], int order)
{
int i;
for (i = 0; i < XBUFSIZE; i++) {
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
buf[i] = (char *)__get_free_pages(GFP_KERNEL, order);
if (!buf[i])
goto err_free_buf;
}
return 0;
err_free_buf:
while (i-- > 0)
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
free_pages((unsigned long)buf[i], order);
return -ENOMEM;
}
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
static int testmgr_alloc_buf(char *buf[XBUFSIZE])
{
return __testmgr_alloc_buf(buf, 0);
}
static void __testmgr_free_buf(char *buf[XBUFSIZE], int order)
{
int i;
for (i = 0; i < XBUFSIZE; i++)
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
free_pages((unsigned long)buf[i], order);
}
static void testmgr_free_buf(char *buf[XBUFSIZE])
{
__testmgr_free_buf(buf, 0);
}
#define TESTMGR_POISON_BYTE 0xfe
#define TESTMGR_POISON_LEN 16
static inline void testmgr_poison(void *addr, size_t len)
{
memset(addr, TESTMGR_POISON_BYTE, len);
}
/* Is the memory region still fully poisoned? */
static inline bool testmgr_is_poison(const void *addr, size_t len)
{
return memchr_inv(addr, TESTMGR_POISON_BYTE, len) == NULL;
}
/* flush type for hash algorithms */
enum flush_type {
/* merge with update of previous buffer(s) */
FLUSH_TYPE_NONE = 0,
/* update with previous buffer(s) before doing this one */
FLUSH_TYPE_FLUSH,
/* likewise, but also export and re-import the intermediate state */
FLUSH_TYPE_REIMPORT,
};
/* finalization function for hash algorithms */
enum finalization_type {
FINALIZATION_TYPE_FINAL, /* use final() */
FINALIZATION_TYPE_FINUP, /* use finup() */
FINALIZATION_TYPE_DIGEST, /* use digest() */
};
#define TEST_SG_TOTAL 10000
/**
* struct test_sg_division - description of a scatterlist entry
*
* This struct describes one entry of a scatterlist being constructed to check a
* crypto test vector.
*
* @proportion_of_total: length of this chunk relative to the total length,
* given as a proportion out of TEST_SG_TOTAL so that it
* scales to fit any test vector
* @offset: byte offset into a 2-page buffer at which this chunk will start
* @offset_relative_to_alignmask: if true, add the algorithm's alignmask to the
* @offset
* @flush_type: for hashes, whether an update() should be done now vs.
* continuing to accumulate data
* @nosimd: if doing the pending update(), do it with SIMD disabled?
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
*/
struct test_sg_division {
unsigned int proportion_of_total;
unsigned int offset;
bool offset_relative_to_alignmask;
enum flush_type flush_type;
bool nosimd;
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
};
/**
* struct testvec_config - configuration for testing a crypto test vector
*
* This struct describes the data layout and other parameters with which each
* crypto test vector can be tested.
*
* @name: name of this config, logged for debugging purposes if a test fails
* @inplace: operate on the data in-place, if applicable for the algorithm type?
* @req_flags: extra request_flags, e.g. CRYPTO_TFM_REQ_MAY_SLEEP
* @src_divs: description of how to arrange the source scatterlist
* @dst_divs: description of how to arrange the dst scatterlist, if applicable
* for the algorithm type. Defaults to @src_divs if unset.
* @iv_offset: misalignment of the IV in the range [0..MAX_ALGAPI_ALIGNMASK+1],
* where 0 is aligned to a 2*(MAX_ALGAPI_ALIGNMASK+1) byte boundary
* @iv_offset_relative_to_alignmask: if true, add the algorithm's alignmask to
* the @iv_offset
* @key_offset: misalignment of the key, where 0 is default alignment
* @key_offset_relative_to_alignmask: if true, add the algorithm's alignmask to
* the @key_offset
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
* @finalization_type: what finalization function to use for hashes
* @nosimd: execute with SIMD disabled? Requires !CRYPTO_TFM_REQ_MAY_SLEEP.
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
*/
struct testvec_config {
const char *name;
bool inplace;
u32 req_flags;
struct test_sg_division src_divs[XBUFSIZE];
struct test_sg_division dst_divs[XBUFSIZE];
unsigned int iv_offset;
unsigned int key_offset;
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
bool iv_offset_relative_to_alignmask;
bool key_offset_relative_to_alignmask;
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
enum finalization_type finalization_type;
bool nosimd;
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
};
#define TESTVEC_CONFIG_NAMELEN 192
/*
* The following are the lists of testvec_configs to test for each algorithm
* type when the basic crypto self-tests are enabled, i.e. when
* CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is unset. They aim to provide good test
* coverage, while keeping the test time much shorter than the full fuzz tests
* so that the basic tests can be enabled in a wider range of circumstances.
*/
/* Configs for skciphers and aeads */
static const struct testvec_config default_cipher_testvec_configs[] = {
{
.name = "in-place",
.inplace = true,
.src_divs = { { .proportion_of_total = 10000 } },
}, {
.name = "out-of-place",
.src_divs = { { .proportion_of_total = 10000 } },
}, {
.name = "unaligned buffer, offset=1",
.src_divs = { { .proportion_of_total = 10000, .offset = 1 } },
.iv_offset = 1,
.key_offset = 1,
}, {
.name = "buffer aligned only to alignmask",
.src_divs = {
{
.proportion_of_total = 10000,
.offset = 1,
.offset_relative_to_alignmask = true,
},
},
.iv_offset = 1,
.iv_offset_relative_to_alignmask = true,
.key_offset = 1,
.key_offset_relative_to_alignmask = true,
}, {
.name = "two even aligned splits",
.src_divs = {
{ .proportion_of_total = 5000 },
{ .proportion_of_total = 5000 },
},
}, {
.name = "uneven misaligned splits, may sleep",
.req_flags = CRYPTO_TFM_REQ_MAY_SLEEP,
.src_divs = {
{ .proportion_of_total = 1900, .offset = 33 },
{ .proportion_of_total = 3300, .offset = 7 },
{ .proportion_of_total = 4800, .offset = 18 },
},
.iv_offset = 3,
.key_offset = 3,
}, {
.name = "misaligned splits crossing pages, inplace",
.inplace = true,
.src_divs = {
{
.proportion_of_total = 7500,
.offset = PAGE_SIZE - 32
}, {
.proportion_of_total = 2500,
.offset = PAGE_SIZE - 7
},
},
}
};
static const struct testvec_config default_hash_testvec_configs[] = {
{
.name = "init+update+final aligned buffer",
.src_divs = { { .proportion_of_total = 10000 } },
.finalization_type = FINALIZATION_TYPE_FINAL,
}, {
.name = "init+finup aligned buffer",
.src_divs = { { .proportion_of_total = 10000 } },
.finalization_type = FINALIZATION_TYPE_FINUP,
}, {
.name = "digest aligned buffer",
.src_divs = { { .proportion_of_total = 10000 } },
.finalization_type = FINALIZATION_TYPE_DIGEST,
}, {
.name = "init+update+final misaligned buffer",
.src_divs = { { .proportion_of_total = 10000, .offset = 1 } },
.finalization_type = FINALIZATION_TYPE_FINAL,
.key_offset = 1,
}, {
.name = "digest buffer aligned only to alignmask",
.src_divs = {
{
.proportion_of_total = 10000,
.offset = 1,
.offset_relative_to_alignmask = true,
},
},
.finalization_type = FINALIZATION_TYPE_DIGEST,
.key_offset = 1,
.key_offset_relative_to_alignmask = true,
}, {
.name = "init+update+update+final two even splits",
.src_divs = {
{ .proportion_of_total = 5000 },
{
.proportion_of_total = 5000,
.flush_type = FLUSH_TYPE_FLUSH,
},
},
.finalization_type = FINALIZATION_TYPE_FINAL,
}, {
.name = "digest uneven misaligned splits, may sleep",
.req_flags = CRYPTO_TFM_REQ_MAY_SLEEP,
.src_divs = {
{ .proportion_of_total = 1900, .offset = 33 },
{ .proportion_of_total = 3300, .offset = 7 },
{ .proportion_of_total = 4800, .offset = 18 },
},
.finalization_type = FINALIZATION_TYPE_DIGEST,
}, {
.name = "digest misaligned splits crossing pages",
.src_divs = {
{
.proportion_of_total = 7500,
.offset = PAGE_SIZE - 32,
}, {
.proportion_of_total = 2500,
.offset = PAGE_SIZE - 7,
},
},
.finalization_type = FINALIZATION_TYPE_DIGEST,
}, {
.name = "import/export",
.src_divs = {
{
.proportion_of_total = 6500,
.flush_type = FLUSH_TYPE_REIMPORT,
}, {
.proportion_of_total = 3500,
.flush_type = FLUSH_TYPE_REIMPORT,
},
},
.finalization_type = FINALIZATION_TYPE_FINAL,
}
};
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
static unsigned int count_test_sg_divisions(const struct test_sg_division *divs)
{
unsigned int remaining = TEST_SG_TOTAL;
unsigned int ndivs = 0;
do {
remaining -= divs[ndivs++].proportion_of_total;
} while (remaining);
return ndivs;
}
#define SGDIVS_HAVE_FLUSHES BIT(0)
#define SGDIVS_HAVE_NOSIMD BIT(1)
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
static bool valid_sg_divisions(const struct test_sg_division *divs,
unsigned int count, int *flags_ret)
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
{
unsigned int total = 0;
unsigned int i;
for (i = 0; i < count && total != TEST_SG_TOTAL; i++) {
if (divs[i].proportion_of_total <= 0 ||
divs[i].proportion_of_total > TEST_SG_TOTAL - total)
return false;
total += divs[i].proportion_of_total;
if (divs[i].flush_type != FLUSH_TYPE_NONE)
*flags_ret |= SGDIVS_HAVE_FLUSHES;
if (divs[i].nosimd)
*flags_ret |= SGDIVS_HAVE_NOSIMD;
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
}
return total == TEST_SG_TOTAL &&
memchr_inv(&divs[i], 0, (count - i) * sizeof(divs[0])) == NULL;
}
/*
* Check whether the given testvec_config is valid. This isn't strictly needed
* since every testvec_config should be valid, but check anyway so that people
* don't unknowingly add broken configs that don't do what they wanted.
*/
static bool valid_testvec_config(const struct testvec_config *cfg)
{
int flags = 0;
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
if (cfg->name == NULL)
return false;
if (!valid_sg_divisions(cfg->src_divs, ARRAY_SIZE(cfg->src_divs),
&flags))
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
return false;
if (cfg->dst_divs[0].proportion_of_total) {
if (!valid_sg_divisions(cfg->dst_divs,
ARRAY_SIZE(cfg->dst_divs), &flags))
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
return false;
} else {
if (memchr_inv(cfg->dst_divs, 0, sizeof(cfg->dst_divs)))
return false;
/* defaults to dst_divs=src_divs */
}
if (cfg->iv_offset +
(cfg->iv_offset_relative_to_alignmask ? MAX_ALGAPI_ALIGNMASK : 0) >
MAX_ALGAPI_ALIGNMASK + 1)
return false;
if ((flags & (SGDIVS_HAVE_FLUSHES | SGDIVS_HAVE_NOSIMD)) &&
cfg->finalization_type == FINALIZATION_TYPE_DIGEST)
return false;
if ((cfg->nosimd || (flags & SGDIVS_HAVE_NOSIMD)) &&
(cfg->req_flags & CRYPTO_TFM_REQ_MAY_SLEEP))
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
return false;
return true;
}
struct test_sglist {
char *bufs[XBUFSIZE];
struct scatterlist sgl[XBUFSIZE];
struct scatterlist sgl_saved[XBUFSIZE];
struct scatterlist *sgl_ptr;
unsigned int nents;
};
static int init_test_sglist(struct test_sglist *tsgl)
{
return __testmgr_alloc_buf(tsgl->bufs, 1 /* two pages per buffer */);
}
static void destroy_test_sglist(struct test_sglist *tsgl)
{
return __testmgr_free_buf(tsgl->bufs, 1 /* two pages per buffer */);
}
/**
* build_test_sglist() - build a scatterlist for a crypto test
*
* @tsgl: the scatterlist to build. @tsgl->bufs[] contains an array of 2-page
* buffers which the scatterlist @tsgl->sgl[] will be made to point into.
* @divs: the layout specification on which the scatterlist will be based
* @alignmask: the algorithm's alignmask
* @total_len: the total length of the scatterlist to build in bytes
* @data: if non-NULL, the buffers will be filled with this data until it ends.
* Otherwise the buffers will be poisoned. In both cases, some bytes
* past the end of each buffer will be poisoned to help detect overruns.
* @out_divs: if non-NULL, the test_sg_division to which each scatterlist entry
* corresponds will be returned here. This will match @divs except
* that divisions resolving to a length of 0 are omitted as they are
* not included in the scatterlist.
*
* Return: 0 or a -errno value
*/
static int build_test_sglist(struct test_sglist *tsgl,
const struct test_sg_division *divs,
const unsigned int alignmask,
const unsigned int total_len,
struct iov_iter *data,
const struct test_sg_division *out_divs[XBUFSIZE])
{
struct {
const struct test_sg_division *div;
size_t length;
} partitions[XBUFSIZE];
const unsigned int ndivs = count_test_sg_divisions(divs);
unsigned int len_remaining = total_len;
unsigned int i;
BUILD_BUG_ON(ARRAY_SIZE(partitions) != ARRAY_SIZE(tsgl->sgl));
if (WARN_ON(ndivs > ARRAY_SIZE(partitions)))
return -EINVAL;
/* Calculate the (div, length) pairs */
tsgl->nents = 0;
for (i = 0; i < ndivs; i++) {
unsigned int len_this_sg =
min(len_remaining,
(total_len * divs[i].proportion_of_total +
TEST_SG_TOTAL / 2) / TEST_SG_TOTAL);
if (len_this_sg != 0) {
partitions[tsgl->nents].div = &divs[i];
partitions[tsgl->nents].length = len_this_sg;
tsgl->nents++;
len_remaining -= len_this_sg;
}
}
if (tsgl->nents == 0) {
partitions[tsgl->nents].div = &divs[0];
partitions[tsgl->nents].length = 0;
tsgl->nents++;
}
partitions[tsgl->nents - 1].length += len_remaining;
/* Set up the sgl entries and fill the data or poison */
sg_init_table(tsgl->sgl, tsgl->nents);
for (i = 0; i < tsgl->nents; i++) {
unsigned int offset = partitions[i].div->offset;
void *addr;
if (partitions[i].div->offset_relative_to_alignmask)
offset += alignmask;
while (offset + partitions[i].length + TESTMGR_POISON_LEN >
2 * PAGE_SIZE) {
if (WARN_ON(offset <= 0))
return -EINVAL;
offset /= 2;
}
addr = &tsgl->bufs[i][offset];
sg_set_buf(&tsgl->sgl[i], addr, partitions[i].length);
if (out_divs)
out_divs[i] = partitions[i].div;
if (data) {
size_t copy_len, copied;
copy_len = min(partitions[i].length, data->count);
copied = copy_from_iter(addr, copy_len, data);
if (WARN_ON(copied != copy_len))
return -EINVAL;
testmgr_poison(addr + copy_len, partitions[i].length +
TESTMGR_POISON_LEN - copy_len);
} else {
testmgr_poison(addr, partitions[i].length +
TESTMGR_POISON_LEN);
}
}
sg_mark_end(&tsgl->sgl[tsgl->nents - 1]);
tsgl->sgl_ptr = tsgl->sgl;
memcpy(tsgl->sgl_saved, tsgl->sgl, tsgl->nents * sizeof(tsgl->sgl[0]));
return 0;
}
/*
* Verify that a scatterlist crypto operation produced the correct output.
*
* @tsgl: scatterlist containing the actual output
* @expected_output: buffer containing the expected output
* @len_to_check: length of @expected_output in bytes
* @unchecked_prefix_len: number of ignored bytes in @tsgl prior to real result
* @check_poison: verify that the poison bytes after each chunk are intact?
*
* Return: 0 if correct, -EINVAL if incorrect, -EOVERFLOW if buffer overrun.
*/
static int verify_correct_output(const struct test_sglist *tsgl,
const char *expected_output,
unsigned int len_to_check,
unsigned int unchecked_prefix_len,
bool check_poison)
{
unsigned int i;
for (i = 0; i < tsgl->nents; i++) {
struct scatterlist *sg = &tsgl->sgl_ptr[i];
unsigned int len = sg->length;
unsigned int offset = sg->offset;
const char *actual_output;
if (unchecked_prefix_len) {
if (unchecked_prefix_len >= len) {
unchecked_prefix_len -= len;
continue;
}
offset += unchecked_prefix_len;
len -= unchecked_prefix_len;
unchecked_prefix_len = 0;
}
len = min(len, len_to_check);
actual_output = page_address(sg_page(sg)) + offset;
if (memcmp(expected_output, actual_output, len) != 0)
return -EINVAL;
if (check_poison &&
!testmgr_is_poison(actual_output + len, TESTMGR_POISON_LEN))
return -EOVERFLOW;
len_to_check -= len;
expected_output += len;
}
if (WARN_ON(len_to_check != 0))
return -EINVAL;
return 0;
}
static bool is_test_sglist_corrupted(const struct test_sglist *tsgl)
{
unsigned int i;
for (i = 0; i < tsgl->nents; i++) {
if (tsgl->sgl[i].page_link != tsgl->sgl_saved[i].page_link)
return true;
if (tsgl->sgl[i].offset != tsgl->sgl_saved[i].offset)
return true;
if (tsgl->sgl[i].length != tsgl->sgl_saved[i].length)
return true;
}
return false;
}
struct cipher_test_sglists {
struct test_sglist src;
struct test_sglist dst;
};
static struct cipher_test_sglists *alloc_cipher_test_sglists(void)
{
struct cipher_test_sglists *tsgls;
tsgls = kmalloc(sizeof(*tsgls), GFP_KERNEL);
if (!tsgls)
return NULL;
if (init_test_sglist(&tsgls->src) != 0)
goto fail_kfree;
if (init_test_sglist(&tsgls->dst) != 0)
goto fail_destroy_src;
return tsgls;
fail_destroy_src:
destroy_test_sglist(&tsgls->src);
fail_kfree:
kfree(tsgls);
return NULL;
}
static void free_cipher_test_sglists(struct cipher_test_sglists *tsgls)
{
if (tsgls) {
destroy_test_sglist(&tsgls->src);
destroy_test_sglist(&tsgls->dst);
kfree(tsgls);
}
}
/* Build the src and dst scatterlists for an skcipher or AEAD test */
static int build_cipher_test_sglists(struct cipher_test_sglists *tsgls,
const struct testvec_config *cfg,
unsigned int alignmask,
unsigned int src_total_len,
unsigned int dst_total_len,
const struct kvec *inputs,
unsigned int nr_inputs)
{
struct iov_iter input;
int err;
iov_iter_kvec(&input, WRITE, inputs, nr_inputs, src_total_len);
err = build_test_sglist(&tsgls->src, cfg->src_divs, alignmask,
cfg->inplace ?
max(dst_total_len, src_total_len) :
src_total_len,
&input, NULL);
if (err)
return err;
if (cfg->inplace) {
tsgls->dst.sgl_ptr = tsgls->src.sgl;
tsgls->dst.nents = tsgls->src.nents;
return 0;
}
return build_test_sglist(&tsgls->dst,
cfg->dst_divs[0].proportion_of_total ?
cfg->dst_divs : cfg->src_divs,
alignmask, dst_total_len, NULL, NULL);
}
/*
* Support for testing passing a misaligned key to setkey():
*
* If cfg->key_offset is set, copy the key into a new buffer at that offset,
* optionally adding alignmask. Else, just use the key directly.
*/
static int prepare_keybuf(const u8 *key, unsigned int ksize,
const struct testvec_config *cfg,
unsigned int alignmask,
const u8 **keybuf_ret, const u8 **keyptr_ret)
{
unsigned int key_offset = cfg->key_offset;
u8 *keybuf = NULL, *keyptr = (u8 *)key;
if (key_offset != 0) {
if (cfg->key_offset_relative_to_alignmask)
key_offset += alignmask;
keybuf = kmalloc(key_offset + ksize, GFP_KERNEL);
if (!keybuf)
return -ENOMEM;
keyptr = keybuf + key_offset;
memcpy(keyptr, key, ksize);
}
*keybuf_ret = keybuf;
*keyptr_ret = keyptr;
return 0;
}
/* Like setkey_f(tfm, key, ksize), but sometimes misalign the key */
#define do_setkey(setkey_f, tfm, key, ksize, cfg, alignmask) \
({ \
const u8 *keybuf, *keyptr; \
int err; \
\
err = prepare_keybuf((key), (ksize), (cfg), (alignmask), \
&keybuf, &keyptr); \
if (err == 0) { \
err = setkey_f((tfm), keyptr, (ksize)); \
kfree(keybuf); \
} \
err; \
})
#ifdef CONFIG_CRYPTO_MANAGER_EXTRA_TESTS
/* Generate a random length in range [0, max_len], but prefer smaller values */
static unsigned int generate_random_length(unsigned int max_len)
{
unsigned int len = prandom_u32() % (max_len + 1);
switch (prandom_u32() % 4) {
case 0:
return len % 64;
case 1:
return len % 256;
case 2:
return len % 1024;
default:
return len;
}
}
/* Flip a random bit in the given nonempty data buffer */
static void flip_random_bit(u8 *buf, size_t size)
{
size_t bitpos;
bitpos = prandom_u32() % (size * 8);
buf[bitpos / 8] ^= 1 << (bitpos % 8);
}
/* Flip a random byte in the given nonempty data buffer */
static void flip_random_byte(u8 *buf, size_t size)
{
buf[prandom_u32() % size] ^= 0xff;
}
/* Sometimes make some random changes to the given nonempty data buffer */
static void mutate_buffer(u8 *buf, size_t size)
{
size_t num_flips;
size_t i;
/* Sometimes flip some bits */
if (prandom_u32() % 4 == 0) {
num_flips = min_t(size_t, 1 << (prandom_u32() % 8), size * 8);
for (i = 0; i < num_flips; i++)
flip_random_bit(buf, size);
}
/* Sometimes flip some bytes */
if (prandom_u32() % 4 == 0) {
num_flips = min_t(size_t, 1 << (prandom_u32() % 8), size);
for (i = 0; i < num_flips; i++)
flip_random_byte(buf, size);
}
}
/* Randomly generate 'count' bytes, but sometimes make them "interesting" */
static void generate_random_bytes(u8 *buf, size_t count)
{
u8 b;
u8 increment;
size_t i;
if (count == 0)
return;
switch (prandom_u32() % 8) { /* Choose a generation strategy */
case 0:
case 1:
/* All the same byte, plus optional mutations */
switch (prandom_u32() % 4) {
case 0:
b = 0x00;
break;
case 1:
b = 0xff;
break;
default:
b = (u8)prandom_u32();
break;
}
memset(buf, b, count);
mutate_buffer(buf, count);
break;
case 2:
/* Ascending or descending bytes, plus optional mutations */
increment = (u8)prandom_u32();
b = (u8)prandom_u32();
for (i = 0; i < count; i++, b += increment)
buf[i] = b;
mutate_buffer(buf, count);
break;
default:
/* Fully random bytes */
for (i = 0; i < count; i++)
buf[i] = (u8)prandom_u32();
}
}
static char *generate_random_sgl_divisions(struct test_sg_division *divs,
size_t max_divs, char *p, char *end,
bool gen_flushes, u32 req_flags)
{
struct test_sg_division *div = divs;
unsigned int remaining = TEST_SG_TOTAL;
do {
unsigned int this_len;
const char *flushtype_str;
if (div == &divs[max_divs - 1] || prandom_u32() % 2 == 0)
this_len = remaining;
else
this_len = 1 + (prandom_u32() % remaining);
div->proportion_of_total = this_len;
if (prandom_u32() % 4 == 0)
div->offset = (PAGE_SIZE - 128) + (prandom_u32() % 128);
else if (prandom_u32() % 2 == 0)
div->offset = prandom_u32() % 32;
else
div->offset = prandom_u32() % PAGE_SIZE;
if (prandom_u32() % 8 == 0)
div->offset_relative_to_alignmask = true;
div->flush_type = FLUSH_TYPE_NONE;
if (gen_flushes) {
switch (prandom_u32() % 4) {
case 0:
div->flush_type = FLUSH_TYPE_REIMPORT;
break;
case 1:
div->flush_type = FLUSH_TYPE_FLUSH;
break;
}
}
if (div->flush_type != FLUSH_TYPE_NONE &&
!(req_flags & CRYPTO_TFM_REQ_MAY_SLEEP) &&
prandom_u32() % 2 == 0)
div->nosimd = true;
switch (div->flush_type) {
case FLUSH_TYPE_FLUSH:
if (div->nosimd)
flushtype_str = "<flush,nosimd>";
else
flushtype_str = "<flush>";
break;
case FLUSH_TYPE_REIMPORT:
if (div->nosimd)
flushtype_str = "<reimport,nosimd>";
else
flushtype_str = "<reimport>";
break;
default:
flushtype_str = "";
break;
}
BUILD_BUG_ON(TEST_SG_TOTAL != 10000); /* for "%u.%u%%" */
p += scnprintf(p, end - p, "%s%u.%u%%@%s+%u%s", flushtype_str,
this_len / 100, this_len % 100,
div->offset_relative_to_alignmask ?
"alignmask" : "",
div->offset, this_len == remaining ? "" : ", ");
remaining -= this_len;
div++;
} while (remaining);
return p;
}
/* Generate a random testvec_config for fuzz testing */
static void generate_random_testvec_config(struct testvec_config *cfg,
char *name, size_t max_namelen)
{
char *p = name;
char * const end = name + max_namelen;
memset(cfg, 0, sizeof(*cfg));
cfg->name = name;
p += scnprintf(p, end - p, "random:");
if (prandom_u32() % 2 == 0) {
cfg->inplace = true;
p += scnprintf(p, end - p, " inplace");
}
if (prandom_u32() % 2 == 0) {
cfg->req_flags |= CRYPTO_TFM_REQ_MAY_SLEEP;
p += scnprintf(p, end - p, " may_sleep");
}
switch (prandom_u32() % 4) {
case 0:
cfg->finalization_type = FINALIZATION_TYPE_FINAL;
p += scnprintf(p, end - p, " use_final");
break;
case 1:
cfg->finalization_type = FINALIZATION_TYPE_FINUP;
p += scnprintf(p, end - p, " use_finup");
break;
default:
cfg->finalization_type = FINALIZATION_TYPE_DIGEST;
p += scnprintf(p, end - p, " use_digest");
break;
}
if (!(cfg->req_flags & CRYPTO_TFM_REQ_MAY_SLEEP) &&
prandom_u32() % 2 == 0) {
cfg->nosimd = true;
p += scnprintf(p, end - p, " nosimd");
}
p += scnprintf(p, end - p, " src_divs=[");
p = generate_random_sgl_divisions(cfg->src_divs,
ARRAY_SIZE(cfg->src_divs), p, end,
(cfg->finalization_type !=
FINALIZATION_TYPE_DIGEST),
cfg->req_flags);
p += scnprintf(p, end - p, "]");
if (!cfg->inplace && prandom_u32() % 2 == 0) {
p += scnprintf(p, end - p, " dst_divs=[");
p = generate_random_sgl_divisions(cfg->dst_divs,
ARRAY_SIZE(cfg->dst_divs),
p, end, false,
cfg->req_flags);
p += scnprintf(p, end - p, "]");
}
if (prandom_u32() % 2 == 0) {
cfg->iv_offset = 1 + (prandom_u32() % MAX_ALGAPI_ALIGNMASK);
p += scnprintf(p, end - p, " iv_offset=%u", cfg->iv_offset);
}
if (prandom_u32() % 2 == 0) {
cfg->key_offset = 1 + (prandom_u32() % MAX_ALGAPI_ALIGNMASK);
p += scnprintf(p, end - p, " key_offset=%u", cfg->key_offset);
}
WARN_ON_ONCE(!valid_testvec_config(cfg));
}
static void crypto_disable_simd_for_test(void)
{
preempt_disable();
__this_cpu_write(crypto_simd_disabled_for_test, true);
}
static void crypto_reenable_simd_for_test(void)
{
__this_cpu_write(crypto_simd_disabled_for_test, false);
preempt_enable();
}
/*
* Given an algorithm name, build the name of the generic implementation of that
* algorithm, assuming the usual naming convention. Specifically, this appends
* "-generic" to every part of the name that is not a template name. Examples:
*
* aes => aes-generic
* cbc(aes) => cbc(aes-generic)
* cts(cbc(aes)) => cts(cbc(aes-generic))
* rfc7539(chacha20,poly1305) => rfc7539(chacha20-generic,poly1305-generic)
*
* Return: 0 on success, or -ENAMETOOLONG if the generic name would be too long
*/
static int build_generic_driver_name(const char *algname,
char driver_name[CRYPTO_MAX_ALG_NAME])
{
const char *in = algname;
char *out = driver_name;
size_t len = strlen(algname);
if (len >= CRYPTO_MAX_ALG_NAME)
goto too_long;
do {
const char *in_saved = in;
while (*in && *in != '(' && *in != ')' && *in != ',')
*out++ = *in++;
if (*in != '(' && in > in_saved) {
len += 8;
if (len >= CRYPTO_MAX_ALG_NAME)
goto too_long;
memcpy(out, "-generic", 8);
out += 8;
}
} while ((*out++ = *in++) != '\0');
return 0;
too_long:
pr_err("alg: generic driver name for \"%s\" would be too long\n",
algname);
return -ENAMETOOLONG;
}
#else /* !CONFIG_CRYPTO_MANAGER_EXTRA_TESTS */
static void crypto_disable_simd_for_test(void)
{
}
static void crypto_reenable_simd_for_test(void)
{
}
#endif /* !CONFIG_CRYPTO_MANAGER_EXTRA_TESTS */
static int build_hash_sglist(struct test_sglist *tsgl,
const struct hash_testvec *vec,
const struct testvec_config *cfg,
unsigned int alignmask,
const struct test_sg_division *divs[XBUFSIZE])
{
struct kvec kv;
struct iov_iter input;
kv.iov_base = (void *)vec->plaintext;
kv.iov_len = vec->psize;
iov_iter_kvec(&input, WRITE, &kv, 1, vec->psize);
return build_test_sglist(tsgl, cfg->src_divs, alignmask, vec->psize,
&input, divs);
}
static int check_hash_result(const char *type,
const u8 *result, unsigned int digestsize,
const struct hash_testvec *vec,
const char *vec_name,
const char *driver,
const struct testvec_config *cfg)
{
if (memcmp(result, vec->digest, digestsize) != 0) {
pr_err("alg: %s: %s test failed (wrong result) on test vector %s, cfg=\"%s\"\n",
type, driver, vec_name, cfg->name);
return -EINVAL;
}
if (!testmgr_is_poison(&result[digestsize], TESTMGR_POISON_LEN)) {
pr_err("alg: %s: %s overran result buffer on test vector %s, cfg=\"%s\"\n",
type, driver, vec_name, cfg->name);
return -EOVERFLOW;
}
return 0;
}
static inline int check_shash_op(const char *op, int err,
const char *driver, const char *vec_name,
const struct testvec_config *cfg)
{
if (err)
pr_err("alg: shash: %s %s() failed with err %d on test vector %s, cfg=\"%s\"\n",
driver, op, err, vec_name, cfg->name);
return err;
}
static inline const void *sg_data(struct scatterlist *sg)
{
return page_address(sg_page(sg)) + sg->offset;
}
/* Test one hash test vector in one configuration, using the shash API */
static int test_shash_vec_cfg(const char *driver,
const struct hash_testvec *vec,
const char *vec_name,
const struct testvec_config *cfg,
struct shash_desc *desc,
struct test_sglist *tsgl,
u8 *hashstate)
{
struct crypto_shash *tfm = desc->tfm;
const unsigned int alignmask = crypto_shash_alignmask(tfm);
const unsigned int digestsize = crypto_shash_digestsize(tfm);
const unsigned int statesize = crypto_shash_statesize(tfm);
const struct test_sg_division *divs[XBUFSIZE];
unsigned int i;
u8 result[HASH_MAX_DIGESTSIZE + TESTMGR_POISON_LEN];
int err;
/* Set the key, if specified */
if (vec->ksize) {
err = do_setkey(crypto_shash_setkey, tfm, vec->key, vec->ksize,
cfg, alignmask);
if (err) {
if (err == vec->setkey_error)
return 0;
pr_err("alg: shash: %s setkey failed on test vector %s; expected_error=%d, actual_error=%d, flags=%#x\n",
driver, vec_name, vec->setkey_error, err,
crypto_shash_get_flags(tfm));
return err;
}
if (vec->setkey_error) {
pr_err("alg: shash: %s setkey unexpectedly succeeded on test vector %s; expected_error=%d\n",
driver, vec_name, vec->setkey_error);
return -EINVAL;
}
}
/* Build the scatterlist for the source data */
err = build_hash_sglist(tsgl, vec, cfg, alignmask, divs);
if (err) {
pr_err("alg: shash: %s: error preparing scatterlist for test vector %s, cfg=\"%s\"\n",
driver, vec_name, cfg->name);
return err;
}
/* Do the actual hashing */
testmgr_poison(desc->__ctx, crypto_shash_descsize(tfm));
testmgr_poison(result, digestsize + TESTMGR_POISON_LEN);
if (cfg->finalization_type == FINALIZATION_TYPE_DIGEST ||
vec->digest_error) {
/* Just using digest() */
if (tsgl->nents != 1)
return 0;
if (cfg->nosimd)
crypto_disable_simd_for_test();
err = crypto_shash_digest(desc, sg_data(&tsgl->sgl[0]),
tsgl->sgl[0].length, result);
if (cfg->nosimd)
crypto_reenable_simd_for_test();
if (err) {
if (err == vec->digest_error)
return 0;
pr_err("alg: shash: %s digest() failed on test vector %s; expected_error=%d, actual_error=%d, cfg=\"%s\"\n",
driver, vec_name, vec->digest_error, err,
cfg->name);
return err;
}
if (vec->digest_error) {
pr_err("alg: shash: %s digest() unexpectedly succeeded on test vector %s; expected_error=%d, cfg=\"%s\"\n",
driver, vec_name, vec->digest_error, cfg->name);
return -EINVAL;
}
goto result_ready;
}
/* Using init(), zero or more update(), then final() or finup() */
if (cfg->nosimd)
crypto_disable_simd_for_test();
err = crypto_shash_init(desc);
if (cfg->nosimd)
crypto_reenable_simd_for_test();
err = check_shash_op("init", err, driver, vec_name, cfg);
if (err)
return err;
for (i = 0; i < tsgl->nents; i++) {
if (i + 1 == tsgl->nents &&
cfg->finalization_type == FINALIZATION_TYPE_FINUP) {
if (divs[i]->nosimd)
crypto_disable_simd_for_test();
err = crypto_shash_finup(desc, sg_data(&tsgl->sgl[i]),
tsgl->sgl[i].length, result);
if (divs[i]->nosimd)
crypto_reenable_simd_for_test();
err = check_shash_op("finup", err, driver, vec_name,
cfg);
if (err)
return err;
goto result_ready;
}
if (divs[i]->nosimd)
crypto_disable_simd_for_test();
err = crypto_shash_update(desc, sg_data(&tsgl->sgl[i]),
tsgl->sgl[i].length);
if (divs[i]->nosimd)
crypto_reenable_simd_for_test();
err = check_shash_op("update", err, driver, vec_name, cfg);
if (err)
return err;
if (divs[i]->flush_type == FLUSH_TYPE_REIMPORT) {
/* Test ->export() and ->import() */
testmgr_poison(hashstate + statesize,
TESTMGR_POISON_LEN);
err = crypto_shash_export(desc, hashstate);
err = check_shash_op("export", err, driver, vec_name,
cfg);
if (err)
return err;
if (!testmgr_is_poison(hashstate + statesize,
TESTMGR_POISON_LEN)) {
pr_err("alg: shash: %s export() overran state buffer on test vector %s, cfg=\"%s\"\n",
driver, vec_name, cfg->name);
return -EOVERFLOW;
}
testmgr_poison(desc->__ctx, crypto_shash_descsize(tfm));
err = crypto_shash_import(desc, hashstate);
err = check_shash_op("import", err, driver, vec_name,
cfg);
if (err)
return err;
}
}
if (cfg->nosimd)
crypto_disable_simd_for_test();
err = crypto_shash_final(desc, result);
if (cfg->nosimd)
crypto_reenable_simd_for_test();
err = check_shash_op("final", err, driver, vec_name, cfg);
if (err)
return err;
result_ready:
return check_hash_result("shash", result, digestsize, vec, vec_name,
driver, cfg);
}
static int do_ahash_op(int (*op)(struct ahash_request *req),
struct ahash_request *req,
struct crypto_wait *wait, bool nosimd)
{
int err;
if (nosimd)
crypto_disable_simd_for_test();
err = op(req);
if (nosimd)
crypto_reenable_simd_for_test();
return crypto_wait_req(err, wait);
}
static int check_nonfinal_ahash_op(const char *op, int err,
u8 *result, unsigned int digestsize,
const char *driver, const char *vec_name,
const struct testvec_config *cfg)
{
if (err) {
pr_err("alg: ahash: %s %s() failed with err %d on test vector %s, cfg=\"%s\"\n",
driver, op, err, vec_name, cfg->name);
return err;
}
if (!testmgr_is_poison(result, digestsize)) {
pr_err("alg: ahash: %s %s() used result buffer on test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
return -EINVAL;
}
return 0;
}
/* Test one hash test vector in one configuration, using the ahash API */
static int test_ahash_vec_cfg(const char *driver,
const struct hash_testvec *vec,
const char *vec_name,
const struct testvec_config *cfg,
struct ahash_request *req,
struct test_sglist *tsgl,
u8 *hashstate)
{
struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
const unsigned int alignmask = crypto_ahash_alignmask(tfm);
const unsigned int digestsize = crypto_ahash_digestsize(tfm);
const unsigned int statesize = crypto_ahash_statesize(tfm);
const u32 req_flags = CRYPTO_TFM_REQ_MAY_BACKLOG | cfg->req_flags;
const struct test_sg_division *divs[XBUFSIZE];
DECLARE_CRYPTO_WAIT(wait);
unsigned int i;
struct scatterlist *pending_sgl;
unsigned int pending_len;
u8 result[HASH_MAX_DIGESTSIZE + TESTMGR_POISON_LEN];
int err;
/* Set the key, if specified */
if (vec->ksize) {
err = do_setkey(crypto_ahash_setkey, tfm, vec->key, vec->ksize,
cfg, alignmask);
if (err) {
if (err == vec->setkey_error)
return 0;
pr_err("alg: ahash: %s setkey failed on test vector %s; expected_error=%d, actual_error=%d, flags=%#x\n",
driver, vec_name, vec->setkey_error, err,
crypto_ahash_get_flags(tfm));
return err;
}
if (vec->setkey_error) {
pr_err("alg: ahash: %s setkey unexpectedly succeeded on test vector %s; expected_error=%d\n",
driver, vec_name, vec->setkey_error);
return -EINVAL;
}
}
/* Build the scatterlist for the source data */
err = build_hash_sglist(tsgl, vec, cfg, alignmask, divs);
if (err) {
pr_err("alg: ahash: %s: error preparing scatterlist for test vector %s, cfg=\"%s\"\n",
driver, vec_name, cfg->name);
return err;
}
/* Do the actual hashing */
testmgr_poison(req->__ctx, crypto_ahash_reqsize(tfm));
testmgr_poison(result, digestsize + TESTMGR_POISON_LEN);
if (cfg->finalization_type == FINALIZATION_TYPE_DIGEST ||
vec->digest_error) {
/* Just using digest() */
ahash_request_set_callback(req, req_flags, crypto_req_done,
&wait);
ahash_request_set_crypt(req, tsgl->sgl, result, vec->psize);
err = do_ahash_op(crypto_ahash_digest, req, &wait, cfg->nosimd);
if (err) {
if (err == vec->digest_error)
return 0;
pr_err("alg: ahash: %s digest() failed on test vector %s; expected_error=%d, actual_error=%d, cfg=\"%s\"\n",
driver, vec_name, vec->digest_error, err,
cfg->name);
return err;
}
if (vec->digest_error) {
pr_err("alg: ahash: %s digest() unexpectedly succeeded on test vector %s; expected_error=%d, cfg=\"%s\"\n",
driver, vec_name, vec->digest_error, cfg->name);
return -EINVAL;
}
goto result_ready;
}
/* Using init(), zero or more update(), then final() or finup() */
ahash_request_set_callback(req, req_flags, crypto_req_done, &wait);
ahash_request_set_crypt(req, NULL, result, 0);
err = do_ahash_op(crypto_ahash_init, req, &wait, cfg->nosimd);
err = check_nonfinal_ahash_op("init", err, result, digestsize,
driver, vec_name, cfg);
if (err)
return err;
pending_sgl = NULL;
pending_len = 0;
for (i = 0; i < tsgl->nents; i++) {
if (divs[i]->flush_type != FLUSH_TYPE_NONE &&
pending_sgl != NULL) {
/* update() with the pending data */
ahash_request_set_callback(req, req_flags,
crypto_req_done, &wait);
ahash_request_set_crypt(req, pending_sgl, result,
pending_len);
err = do_ahash_op(crypto_ahash_update, req, &wait,
divs[i]->nosimd);
err = check_nonfinal_ahash_op("update", err,
result, digestsize,
driver, vec_name, cfg);
if (err)
return err;
pending_sgl = NULL;
pending_len = 0;
}
if (divs[i]->flush_type == FLUSH_TYPE_REIMPORT) {
/* Test ->export() and ->import() */
testmgr_poison(hashstate + statesize,
TESTMGR_POISON_LEN);
err = crypto_ahash_export(req, hashstate);
err = check_nonfinal_ahash_op("export", err,
result, digestsize,
driver, vec_name, cfg);
if (err)
return err;
if (!testmgr_is_poison(hashstate + statesize,
TESTMGR_POISON_LEN)) {
pr_err("alg: ahash: %s export() overran state buffer on test vector %s, cfg=\"%s\"\n",
driver, vec_name, cfg->name);
return -EOVERFLOW;
}
testmgr_poison(req->__ctx, crypto_ahash_reqsize(tfm));
err = crypto_ahash_import(req, hashstate);
err = check_nonfinal_ahash_op("import", err,
result, digestsize,
driver, vec_name, cfg);
if (err)
return err;
}
if (pending_sgl == NULL)
pending_sgl = &tsgl->sgl[i];
pending_len += tsgl->sgl[i].length;
}
ahash_request_set_callback(req, req_flags, crypto_req_done, &wait);
ahash_request_set_crypt(req, pending_sgl, result, pending_len);
if (cfg->finalization_type == FINALIZATION_TYPE_FINAL) {
/* finish with update() and final() */
err = do_ahash_op(crypto_ahash_update, req, &wait, cfg->nosimd);
err = check_nonfinal_ahash_op("update", err, result, digestsize,
driver, vec_name, cfg);
if (err)
return err;
err = do_ahash_op(crypto_ahash_final, req, &wait, cfg->nosimd);
if (err) {
pr_err("alg: ahash: %s final() failed with err %d on test vector %s, cfg=\"%s\"\n",
driver, err, vec_name, cfg->name);
return err;
}
} else {
/* finish with finup() */
err = do_ahash_op(crypto_ahash_finup, req, &wait, cfg->nosimd);
if (err) {
pr_err("alg: ahash: %s finup() failed with err %d on test vector %s, cfg=\"%s\"\n",
driver, err, vec_name, cfg->name);
return err;
}
}
result_ready:
return check_hash_result("ahash", result, digestsize, vec, vec_name,
driver, cfg);
}
static int test_hash_vec_cfg(const char *driver,
const struct hash_testvec *vec,
const char *vec_name,
const struct testvec_config *cfg,
struct ahash_request *req,
struct shash_desc *desc,
struct test_sglist *tsgl,
u8 *hashstate)
{
int err;
/*
* For algorithms implemented as "shash", most bugs will be detected by
* both the shash and ahash tests. Test the shash API first so that the
* failures involve less indirection, so are easier to debug.
*/
if (desc) {
err = test_shash_vec_cfg(driver, vec, vec_name, cfg, desc, tsgl,
hashstate);
if (err)
return err;
}
return test_ahash_vec_cfg(driver, vec, vec_name, cfg, req, tsgl,
hashstate);
}
static int test_hash_vec(const char *driver, const struct hash_testvec *vec,
unsigned int vec_num, struct ahash_request *req,
struct shash_desc *desc, struct test_sglist *tsgl,
u8 *hashstate)
{
char vec_name[16];
unsigned int i;
int err;
sprintf(vec_name, "%u", vec_num);
for (i = 0; i < ARRAY_SIZE(default_hash_testvec_configs); i++) {
err = test_hash_vec_cfg(driver, vec, vec_name,
&default_hash_testvec_configs[i],
req, desc, tsgl, hashstate);
if (err)
return err;
}
#ifdef CONFIG_CRYPTO_MANAGER_EXTRA_TESTS
if (!noextratests) {
struct testvec_config cfg;
char cfgname[TESTVEC_CONFIG_NAMELEN];
for (i = 0; i < fuzz_iterations; i++) {
generate_random_testvec_config(&cfg, cfgname,
sizeof(cfgname));
err = test_hash_vec_cfg(driver, vec, vec_name, &cfg,
req, desc, tsgl, hashstate);
if (err)
return err;
cond_resched();
}
}
#endif
return 0;
}
#ifdef CONFIG_CRYPTO_MANAGER_EXTRA_TESTS
/*
* Generate a hash test vector from the given implementation.
* Assumes the buffers in 'vec' were already allocated.
*/
static void generate_random_hash_testvec(struct shash_desc *desc,
struct hash_testvec *vec,
unsigned int maxkeysize,
unsigned int maxdatasize,
char *name, size_t max_namelen)
{
/* Data */
vec->psize = generate_random_length(maxdatasize);
generate_random_bytes((u8 *)vec->plaintext, vec->psize);
/*
* Key: length in range [1, maxkeysize], but usually choose maxkeysize.
* If algorithm is unkeyed, then maxkeysize == 0 and set ksize = 0.
*/
vec->setkey_error = 0;
vec->ksize = 0;
if (maxkeysize) {
vec->ksize = maxkeysize;
if (prandom_u32() % 4 == 0)
vec->ksize = 1 + (prandom_u32() % maxkeysize);
generate_random_bytes((u8 *)vec->key, vec->ksize);
vec->setkey_error = crypto_shash_setkey(desc->tfm, vec->key,
vec->ksize);
/* If the key couldn't be set, no need to continue to digest. */
if (vec->setkey_error)
goto done;
}
/* Digest */
vec->digest_error = crypto_shash_digest(desc, vec->plaintext,
vec->psize, (u8 *)vec->digest);
done:
snprintf(name, max_namelen, "\"random: psize=%u ksize=%u\"",
vec->psize, vec->ksize);
}
/*
* Test the hash algorithm represented by @req against the corresponding generic
* implementation, if one is available.
*/
static int test_hash_vs_generic_impl(const char *driver,
const char *generic_driver,
unsigned int maxkeysize,
struct ahash_request *req,
struct shash_desc *desc,
struct test_sglist *tsgl,
u8 *hashstate)
{
struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
const unsigned int digestsize = crypto_ahash_digestsize(tfm);
const unsigned int blocksize = crypto_ahash_blocksize(tfm);
const unsigned int maxdatasize = (2 * PAGE_SIZE) - TESTMGR_POISON_LEN;
const char *algname = crypto_hash_alg_common(tfm)->base.cra_name;
char _generic_driver[CRYPTO_MAX_ALG_NAME];
struct crypto_shash *generic_tfm = NULL;
struct shash_desc *generic_desc = NULL;
unsigned int i;
struct hash_testvec vec = { 0 };
char vec_name[64];
struct testvec_config *cfg;
char cfgname[TESTVEC_CONFIG_NAMELEN];
int err;
if (noextratests)
return 0;
if (!generic_driver) { /* Use default naming convention? */
err = build_generic_driver_name(algname, _generic_driver);
if (err)
return err;
generic_driver = _generic_driver;
}
if (strcmp(generic_driver, driver) == 0) /* Already the generic impl? */
return 0;
generic_tfm = crypto_alloc_shash(generic_driver, 0, 0);
if (IS_ERR(generic_tfm)) {
err = PTR_ERR(generic_tfm);
if (err == -ENOENT) {
pr_warn("alg: hash: skipping comparison tests for %s because %s is unavailable\n",
driver, generic_driver);
return 0;
}
pr_err("alg: hash: error allocating %s (generic impl of %s): %d\n",
generic_driver, algname, err);
return err;
}
cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
if (!cfg) {
err = -ENOMEM;
goto out;
}
generic_desc = kzalloc(sizeof(*desc) +
crypto_shash_descsize(generic_tfm), GFP_KERNEL);
if (!generic_desc) {
err = -ENOMEM;
goto out;
}
generic_desc->tfm = generic_tfm;
/* Check the algorithm properties for consistency. */
if (digestsize != crypto_shash_digestsize(generic_tfm)) {
pr_err("alg: hash: digestsize for %s (%u) doesn't match generic impl (%u)\n",
driver, digestsize,
crypto_shash_digestsize(generic_tfm));
err = -EINVAL;
goto out;
}
if (blocksize != crypto_shash_blocksize(generic_tfm)) {
pr_err("alg: hash: blocksize for %s (%u) doesn't match generic impl (%u)\n",
driver, blocksize, crypto_shash_blocksize(generic_tfm));
err = -EINVAL;
goto out;
}
/*
* Now generate test vectors using the generic implementation, and test
* the other implementation against them.
*/
vec.key = kmalloc(maxkeysize, GFP_KERNEL);
vec.plaintext = kmalloc(maxdatasize, GFP_KERNEL);
vec.digest = kmalloc(digestsize, GFP_KERNEL);
if (!vec.key || !vec.plaintext || !vec.digest) {
err = -ENOMEM;
goto out;
}
for (i = 0; i < fuzz_iterations * 8; i++) {
generate_random_hash_testvec(generic_desc, &vec,
maxkeysize, maxdatasize,
vec_name, sizeof(vec_name));
generate_random_testvec_config(cfg, cfgname, sizeof(cfgname));
err = test_hash_vec_cfg(driver, &vec, vec_name, cfg,
req, desc, tsgl, hashstate);
if (err)
goto out;
cond_resched();
}
err = 0;
out:
kfree(cfg);
kfree(vec.key);
kfree(vec.plaintext);
kfree(vec.digest);
crypto_free_shash(generic_tfm);
mm, treewide: rename kzfree() to kfree_sensitive() As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 09:18:13 +03:00
kfree_sensitive(generic_desc);
return err;
}
#else /* !CONFIG_CRYPTO_MANAGER_EXTRA_TESTS */
static int test_hash_vs_generic_impl(const char *driver,
const char *generic_driver,
unsigned int maxkeysize,
struct ahash_request *req,
struct shash_desc *desc,
struct test_sglist *tsgl,
u8 *hashstate)
{
return 0;
}
#endif /* !CONFIG_CRYPTO_MANAGER_EXTRA_TESTS */
static int alloc_shash(const char *driver, u32 type, u32 mask,
struct crypto_shash **tfm_ret,
struct shash_desc **desc_ret)
{
struct crypto_shash *tfm;
struct shash_desc *desc;
tfm = crypto_alloc_shash(driver, type, mask);
if (IS_ERR(tfm)) {
if (PTR_ERR(tfm) == -ENOENT) {
/*
* This algorithm is only available through the ahash
* API, not the shash API, so skip the shash tests.
*/
return 0;
}
pr_err("alg: hash: failed to allocate shash transform for %s: %ld\n",
driver, PTR_ERR(tfm));
return PTR_ERR(tfm);
}
desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(tfm), GFP_KERNEL);
if (!desc) {
crypto_free_shash(tfm);
return -ENOMEM;
}
desc->tfm = tfm;
*tfm_ret = tfm;
*desc_ret = desc;
return 0;
}
static int __alg_test_hash(const struct hash_testvec *vecs,
unsigned int num_vecs, const char *driver,
u32 type, u32 mask,
const char *generic_driver, unsigned int maxkeysize)
{
struct crypto_ahash *atfm = NULL;
struct ahash_request *req = NULL;
struct crypto_shash *stfm = NULL;
struct shash_desc *desc = NULL;
struct test_sglist *tsgl = NULL;
u8 *hashstate = NULL;
unsigned int statesize;
unsigned int i;
int err;
/*
* Always test the ahash API. This works regardless of whether the
* algorithm is implemented as ahash or shash.
*/
atfm = crypto_alloc_ahash(driver, type, mask);
if (IS_ERR(atfm)) {
pr_err("alg: hash: failed to allocate transform for %s: %ld\n",
driver, PTR_ERR(atfm));
return PTR_ERR(atfm);
}
req = ahash_request_alloc(atfm, GFP_KERNEL);
if (!req) {
pr_err("alg: hash: failed to allocate request for %s\n",
driver);
err = -ENOMEM;
goto out;
}
/*
* If available also test the shash API, to cover corner cases that may
* be missed by testing the ahash API only.
*/
err = alloc_shash(driver, type, mask, &stfm, &desc);
if (err)
goto out;
tsgl = kmalloc(sizeof(*tsgl), GFP_KERNEL);
if (!tsgl || init_test_sglist(tsgl) != 0) {
pr_err("alg: hash: failed to allocate test buffers for %s\n",
driver);
kfree(tsgl);
tsgl = NULL;
err = -ENOMEM;
goto out;
}
statesize = crypto_ahash_statesize(atfm);
if (stfm)
statesize = max(statesize, crypto_shash_statesize(stfm));
hashstate = kmalloc(statesize + TESTMGR_POISON_LEN, GFP_KERNEL);
if (!hashstate) {
pr_err("alg: hash: failed to allocate hash state buffer for %s\n",
driver);
err = -ENOMEM;
goto out;
}
for (i = 0; i < num_vecs; i++) {
err = test_hash_vec(driver, &vecs[i], i, req, desc, tsgl,
hashstate);
if (err)
goto out;
cond_resched();
}
err = test_hash_vs_generic_impl(driver, generic_driver, maxkeysize, req,
desc, tsgl, hashstate);
out:
kfree(hashstate);
if (tsgl) {
destroy_test_sglist(tsgl);
kfree(tsgl);
}
kfree(desc);
crypto_free_shash(stfm);
ahash_request_free(req);
crypto_free_ahash(atfm);
return err;
}
static int alg_test_hash(const struct alg_test_desc *desc, const char *driver,
u32 type, u32 mask)
{
const struct hash_testvec *template = desc->suite.hash.vecs;
unsigned int tcount = desc->suite.hash.count;
unsigned int nr_unkeyed, nr_keyed;
unsigned int maxkeysize = 0;
int err;
/*
* For OPTIONAL_KEY algorithms, we have to do all the unkeyed tests
* first, before setting a key on the tfm. To make this easier, we
* require that the unkeyed test vectors (if any) are listed first.
*/
for (nr_unkeyed = 0; nr_unkeyed < tcount; nr_unkeyed++) {
if (template[nr_unkeyed].ksize)
break;
}
for (nr_keyed = 0; nr_unkeyed + nr_keyed < tcount; nr_keyed++) {
if (!template[nr_unkeyed + nr_keyed].ksize) {
pr_err("alg: hash: test vectors for %s out of order, "
"unkeyed ones must come first\n", desc->alg);
return -EINVAL;
}
maxkeysize = max_t(unsigned int, maxkeysize,
template[nr_unkeyed + nr_keyed].ksize);
}
err = 0;
if (nr_unkeyed) {
err = __alg_test_hash(template, nr_unkeyed, driver, type, mask,
desc->generic_driver, maxkeysize);
template += nr_unkeyed;
}
if (!err && nr_keyed)
err = __alg_test_hash(template, nr_keyed, driver, type, mask,
desc->generic_driver, maxkeysize);
return err;
}
static int test_aead_vec_cfg(const char *driver, int enc,
const struct aead_testvec *vec,
const char *vec_name,
const struct testvec_config *cfg,
struct aead_request *req,
struct cipher_test_sglists *tsgls)
{
struct crypto_aead *tfm = crypto_aead_reqtfm(req);
const unsigned int alignmask = crypto_aead_alignmask(tfm);
const unsigned int ivsize = crypto_aead_ivsize(tfm);
const unsigned int authsize = vec->clen - vec->plen;
const u32 req_flags = CRYPTO_TFM_REQ_MAY_BACKLOG | cfg->req_flags;
const char *op = enc ? "encryption" : "decryption";
DECLARE_CRYPTO_WAIT(wait);
u8 _iv[3 * (MAX_ALGAPI_ALIGNMASK + 1) + MAX_IVLEN];
u8 *iv = PTR_ALIGN(&_iv[0], 2 * (MAX_ALGAPI_ALIGNMASK + 1)) +
cfg->iv_offset +
(cfg->iv_offset_relative_to_alignmask ? alignmask : 0);
struct kvec input[2];
int err;
/* Set the key */
if (vec->wk)
crypto_aead_set_flags(tfm, CRYPTO_TFM_REQ_FORBID_WEAK_KEYS);
else
crypto_aead_clear_flags(tfm, CRYPTO_TFM_REQ_FORBID_WEAK_KEYS);
err = do_setkey(crypto_aead_setkey, tfm, vec->key, vec->klen,
cfg, alignmask);
if (err && err != vec->setkey_error) {
pr_err("alg: aead: %s setkey failed on test vector %s; expected_error=%d, actual_error=%d, flags=%#x\n",
driver, vec_name, vec->setkey_error, err,
crypto_aead_get_flags(tfm));
return err;
}
if (!err && vec->setkey_error) {
pr_err("alg: aead: %s setkey unexpectedly succeeded on test vector %s; expected_error=%d\n",
driver, vec_name, vec->setkey_error);
return -EINVAL;
}
/* Set the authentication tag size */
err = crypto_aead_setauthsize(tfm, authsize);
if (err && err != vec->setauthsize_error) {
pr_err("alg: aead: %s setauthsize failed on test vector %s; expected_error=%d, actual_error=%d\n",
driver, vec_name, vec->setauthsize_error, err);
return err;
}
if (!err && vec->setauthsize_error) {
pr_err("alg: aead: %s setauthsize unexpectedly succeeded on test vector %s; expected_error=%d\n",
driver, vec_name, vec->setauthsize_error);
return -EINVAL;
}
if (vec->setkey_error || vec->setauthsize_error)
return 0;
/* The IV must be copied to a buffer, as the algorithm may modify it */
if (WARN_ON(ivsize > MAX_IVLEN))
return -EINVAL;
if (vec->iv)
memcpy(iv, vec->iv, ivsize);
else
memset(iv, 0, ivsize);
/* Build the src/dst scatterlists */
input[0].iov_base = (void *)vec->assoc;
input[0].iov_len = vec->alen;
input[1].iov_base = enc ? (void *)vec->ptext : (void *)vec->ctext;
input[1].iov_len = enc ? vec->plen : vec->clen;
err = build_cipher_test_sglists(tsgls, cfg, alignmask,
vec->alen + (enc ? vec->plen :
vec->clen),
vec->alen + (enc ? vec->clen :
vec->plen),
input, 2);
if (err) {
pr_err("alg: aead: %s %s: error preparing scatterlists for test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
return err;
}
/* Do the actual encryption or decryption */
testmgr_poison(req->__ctx, crypto_aead_reqsize(tfm));
aead_request_set_callback(req, req_flags, crypto_req_done, &wait);
aead_request_set_crypt(req, tsgls->src.sgl_ptr, tsgls->dst.sgl_ptr,
enc ? vec->plen : vec->clen, iv);
aead_request_set_ad(req, vec->alen);
if (cfg->nosimd)
crypto_disable_simd_for_test();
err = enc ? crypto_aead_encrypt(req) : crypto_aead_decrypt(req);
if (cfg->nosimd)
crypto_reenable_simd_for_test();
err = crypto_wait_req(err, &wait);
/* Check that the algorithm didn't overwrite things it shouldn't have */
if (req->cryptlen != (enc ? vec->plen : vec->clen) ||
req->assoclen != vec->alen ||
req->iv != iv ||
req->src != tsgls->src.sgl_ptr ||
req->dst != tsgls->dst.sgl_ptr ||
crypto_aead_reqtfm(req) != tfm ||
req->base.complete != crypto_req_done ||
req->base.flags != req_flags ||
req->base.data != &wait) {
pr_err("alg: aead: %s %s corrupted request struct on test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
if (req->cryptlen != (enc ? vec->plen : vec->clen))
pr_err("alg: aead: changed 'req->cryptlen'\n");
if (req->assoclen != vec->alen)
pr_err("alg: aead: changed 'req->assoclen'\n");
if (req->iv != iv)
pr_err("alg: aead: changed 'req->iv'\n");
if (req->src != tsgls->src.sgl_ptr)
pr_err("alg: aead: changed 'req->src'\n");
if (req->dst != tsgls->dst.sgl_ptr)
pr_err("alg: aead: changed 'req->dst'\n");
if (crypto_aead_reqtfm(req) != tfm)
pr_err("alg: aead: changed 'req->base.tfm'\n");
if (req->base.complete != crypto_req_done)
pr_err("alg: aead: changed 'req->base.complete'\n");
if (req->base.flags != req_flags)
pr_err("alg: aead: changed 'req->base.flags'\n");
if (req->base.data != &wait)
pr_err("alg: aead: changed 'req->base.data'\n");
return -EINVAL;
}
if (is_test_sglist_corrupted(&tsgls->src)) {
pr_err("alg: aead: %s %s corrupted src sgl on test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
return -EINVAL;
}
if (tsgls->dst.sgl_ptr != tsgls->src.sgl &&
is_test_sglist_corrupted(&tsgls->dst)) {
pr_err("alg: aead: %s %s corrupted dst sgl on test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
return -EINVAL;
}
/* Check for unexpected success or failure, or wrong error code */
if ((err == 0 && vec->novrfy) ||
(err != vec->crypt_error && !(err == -EBADMSG && vec->novrfy))) {
char expected_error[32];
if (vec->novrfy &&
vec->crypt_error != 0 && vec->crypt_error != -EBADMSG)
sprintf(expected_error, "-EBADMSG or %d",
vec->crypt_error);
else if (vec->novrfy)
sprintf(expected_error, "-EBADMSG");
else
sprintf(expected_error, "%d", vec->crypt_error);
if (err) {
pr_err("alg: aead: %s %s failed on test vector %s; expected_error=%s, actual_error=%d, cfg=\"%s\"\n",
driver, op, vec_name, expected_error, err,
cfg->name);
return err;
}
pr_err("alg: aead: %s %s unexpectedly succeeded on test vector %s; expected_error=%s, cfg=\"%s\"\n",
driver, op, vec_name, expected_error, cfg->name);
return -EINVAL;
}
if (err) /* Expectedly failed. */
return 0;
/* Check for the correct output (ciphertext or plaintext) */
err = verify_correct_output(&tsgls->dst, enc ? vec->ctext : vec->ptext,
enc ? vec->clen : vec->plen,
vec->alen, enc || !cfg->inplace);
if (err == -EOVERFLOW) {
pr_err("alg: aead: %s %s overran dst buffer on test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
return err;
}
if (err) {
pr_err("alg: aead: %s %s test failed (wrong result) on test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
return err;
}
return 0;
}
static int test_aead_vec(const char *driver, int enc,
const struct aead_testvec *vec, unsigned int vec_num,
struct aead_request *req,
struct cipher_test_sglists *tsgls)
{
char vec_name[16];
unsigned int i;
int err;
if (enc && vec->novrfy)
return 0;
sprintf(vec_name, "%u", vec_num);
for (i = 0; i < ARRAY_SIZE(default_cipher_testvec_configs); i++) {
err = test_aead_vec_cfg(driver, enc, vec, vec_name,
&default_cipher_testvec_configs[i],
req, tsgls);
if (err)
return err;
}
#ifdef CONFIG_CRYPTO_MANAGER_EXTRA_TESTS
if (!noextratests) {
struct testvec_config cfg;
char cfgname[TESTVEC_CONFIG_NAMELEN];
for (i = 0; i < fuzz_iterations; i++) {
generate_random_testvec_config(&cfg, cfgname,
sizeof(cfgname));
err = test_aead_vec_cfg(driver, enc, vec, vec_name,
&cfg, req, tsgls);
if (err)
return err;
cond_resched();
}
}
#endif
return 0;
}
#ifdef CONFIG_CRYPTO_MANAGER_EXTRA_TESTS
struct aead_extra_tests_ctx {
struct aead_request *req;
struct crypto_aead *tfm;
const char *driver;
const struct alg_test_desc *test_desc;
struct cipher_test_sglists *tsgls;
unsigned int maxdatasize;
unsigned int maxkeysize;
struct aead_testvec vec;
char vec_name[64];
char cfgname[TESTVEC_CONFIG_NAMELEN];
struct testvec_config cfg;
};
/*
* Make at least one random change to a (ciphertext, AAD) pair. "Ciphertext"
* here means the full ciphertext including the authentication tag. The
* authentication tag (and hence also the ciphertext) is assumed to be nonempty.
*/
static void mutate_aead_message(struct aead_testvec *vec, bool aad_iv,
unsigned int ivsize)
{
const unsigned int aad_tail_size = aad_iv ? ivsize : 0;
const unsigned int authsize = vec->clen - vec->plen;
if (prandom_u32() % 2 == 0 && vec->alen > aad_tail_size) {
/* Mutate the AAD */
flip_random_bit((u8 *)vec->assoc, vec->alen - aad_tail_size);
if (prandom_u32() % 2 == 0)
return;
}
if (prandom_u32() % 2 == 0) {
/* Mutate auth tag (assuming it's at the end of ciphertext) */
flip_random_bit((u8 *)vec->ctext + vec->plen, authsize);
} else {
/* Mutate any part of the ciphertext */
flip_random_bit((u8 *)vec->ctext, vec->clen);
}
}
/*
* Minimum authentication tag size in bytes at which we assume that we can
* reliably generate inauthentic messages, i.e. not generate an authentic
* message by chance.
*/
#define MIN_COLLISION_FREE_AUTHSIZE 8
static void generate_aead_message(struct aead_request *req,
const struct aead_test_suite *suite,
struct aead_testvec *vec,
bool prefer_inauthentic)
{
struct crypto_aead *tfm = crypto_aead_reqtfm(req);
const unsigned int ivsize = crypto_aead_ivsize(tfm);
const unsigned int authsize = vec->clen - vec->plen;
const bool inauthentic = (authsize >= MIN_COLLISION_FREE_AUTHSIZE) &&
(prefer_inauthentic || prandom_u32() % 4 == 0);
/* Generate the AAD. */
generate_random_bytes((u8 *)vec->assoc, vec->alen);
if (suite->aad_iv && vec->alen >= ivsize)
/* Avoid implementation-defined behavior. */
memcpy((u8 *)vec->assoc + vec->alen - ivsize, vec->iv, ivsize);
if (inauthentic && prandom_u32() % 2 == 0) {
/* Generate a random ciphertext. */
generate_random_bytes((u8 *)vec->ctext, vec->clen);
} else {
int i = 0;
struct scatterlist src[2], dst;
u8 iv[MAX_IVLEN];
DECLARE_CRYPTO_WAIT(wait);
/* Generate a random plaintext and encrypt it. */
sg_init_table(src, 2);
if (vec->alen)
sg_set_buf(&src[i++], vec->assoc, vec->alen);
if (vec->plen) {
generate_random_bytes((u8 *)vec->ptext, vec->plen);
sg_set_buf(&src[i++], vec->ptext, vec->plen);
}
sg_init_one(&dst, vec->ctext, vec->alen + vec->clen);
memcpy(iv, vec->iv, ivsize);
aead_request_set_callback(req, 0, crypto_req_done, &wait);
aead_request_set_crypt(req, src, &dst, vec->plen, iv);
aead_request_set_ad(req, vec->alen);
vec->crypt_error = crypto_wait_req(crypto_aead_encrypt(req),
&wait);
/* If encryption failed, we're done. */
if (vec->crypt_error != 0)
return;
memmove((u8 *)vec->ctext, vec->ctext + vec->alen, vec->clen);
if (!inauthentic)
return;
/*
* Mutate the authentic (ciphertext, AAD) pair to get an
* inauthentic one.
*/
mutate_aead_message(vec, suite->aad_iv, ivsize);
}
vec->novrfy = 1;
if (suite->einval_allowed)
vec->crypt_error = -EINVAL;
}
/*
* Generate an AEAD test vector 'vec' using the implementation specified by
* 'req'. The buffers in 'vec' must already be allocated.
*
* If 'prefer_inauthentic' is true, then this function will generate inauthentic
* test vectors (i.e. vectors with 'vec->novrfy=1') more often.
*/
static void generate_random_aead_testvec(struct aead_request *req,
struct aead_testvec *vec,
const struct aead_test_suite *suite,
unsigned int maxkeysize,
unsigned int maxdatasize,
char *name, size_t max_namelen,
bool prefer_inauthentic)
{
struct crypto_aead *tfm = crypto_aead_reqtfm(req);
const unsigned int ivsize = crypto_aead_ivsize(tfm);
const unsigned int maxauthsize = crypto_aead_maxauthsize(tfm);
unsigned int authsize;
unsigned int total_len;
/* Key: length in [0, maxkeysize], but usually choose maxkeysize */
vec->klen = maxkeysize;
if (prandom_u32() % 4 == 0)
vec->klen = prandom_u32() % (maxkeysize + 1);
generate_random_bytes((u8 *)vec->key, vec->klen);
vec->setkey_error = crypto_aead_setkey(tfm, vec->key, vec->klen);
/* IV */
generate_random_bytes((u8 *)vec->iv, ivsize);
/* Tag length: in [0, maxauthsize], but usually choose maxauthsize */
authsize = maxauthsize;
if (prandom_u32() % 4 == 0)
authsize = prandom_u32() % (maxauthsize + 1);
if (prefer_inauthentic && authsize < MIN_COLLISION_FREE_AUTHSIZE)
authsize = MIN_COLLISION_FREE_AUTHSIZE;
if (WARN_ON(authsize > maxdatasize))
authsize = maxdatasize;
maxdatasize -= authsize;
vec->setauthsize_error = crypto_aead_setauthsize(tfm, authsize);
/* AAD, plaintext, and ciphertext lengths */
total_len = generate_random_length(maxdatasize);
if (prandom_u32() % 4 == 0)
vec->alen = 0;
else
vec->alen = generate_random_length(total_len);
vec->plen = total_len - vec->alen;
vec->clen = vec->plen + authsize;
/*
* Generate the AAD, plaintext, and ciphertext. Not applicable if the
* key or the authentication tag size couldn't be set.
*/
vec->novrfy = 0;
vec->crypt_error = 0;
if (vec->setkey_error == 0 && vec->setauthsize_error == 0)
generate_aead_message(req, suite, vec, prefer_inauthentic);
snprintf(name, max_namelen,
"\"random: alen=%u plen=%u authsize=%u klen=%u novrfy=%d\"",
vec->alen, vec->plen, authsize, vec->klen, vec->novrfy);
}
static void try_to_generate_inauthentic_testvec(
struct aead_extra_tests_ctx *ctx)
{
int i;
for (i = 0; i < 10; i++) {
generate_random_aead_testvec(ctx->req, &ctx->vec,
&ctx->test_desc->suite.aead,
ctx->maxkeysize, ctx->maxdatasize,
ctx->vec_name,
sizeof(ctx->vec_name), true);
if (ctx->vec.novrfy)
return;
}
}
/*
* Generate inauthentic test vectors (i.e. ciphertext, AAD pairs that aren't the
* result of an encryption with the key) and verify that decryption fails.
*/
static int test_aead_inauthentic_inputs(struct aead_extra_tests_ctx *ctx)
{
unsigned int i;
int err;
for (i = 0; i < fuzz_iterations * 8; i++) {
/*
* Since this part of the tests isn't comparing the
* implementation to another, there's no point in testing any
* test vectors other than inauthentic ones (vec.novrfy=1) here.
*
* If we're having trouble generating such a test vector, e.g.
* if the algorithm keeps rejecting the generated keys, don't
* retry forever; just continue on.
*/
try_to_generate_inauthentic_testvec(ctx);
if (ctx->vec.novrfy) {
generate_random_testvec_config(&ctx->cfg, ctx->cfgname,
sizeof(ctx->cfgname));
err = test_aead_vec_cfg(ctx->driver, DECRYPT, &ctx->vec,
ctx->vec_name, &ctx->cfg,
ctx->req, ctx->tsgls);
if (err)
return err;
}
cond_resched();
}
return 0;
}
/*
* Test the AEAD algorithm against the corresponding generic implementation, if
* one is available.
*/
static int test_aead_vs_generic_impl(struct aead_extra_tests_ctx *ctx)
{
struct crypto_aead *tfm = ctx->tfm;
const char *algname = crypto_aead_alg(tfm)->base.cra_name;
const char *driver = ctx->driver;
const char *generic_driver = ctx->test_desc->generic_driver;
char _generic_driver[CRYPTO_MAX_ALG_NAME];
struct crypto_aead *generic_tfm = NULL;
struct aead_request *generic_req = NULL;
unsigned int i;
int err;
if (!generic_driver) { /* Use default naming convention? */
err = build_generic_driver_name(algname, _generic_driver);
if (err)
return err;
generic_driver = _generic_driver;
}
if (strcmp(generic_driver, driver) == 0) /* Already the generic impl? */
return 0;
generic_tfm = crypto_alloc_aead(generic_driver, 0, 0);
if (IS_ERR(generic_tfm)) {
err = PTR_ERR(generic_tfm);
if (err == -ENOENT) {
pr_warn("alg: aead: skipping comparison tests for %s because %s is unavailable\n",
driver, generic_driver);
return 0;
}
pr_err("alg: aead: error allocating %s (generic impl of %s): %d\n",
generic_driver, algname, err);
return err;
}
generic_req = aead_request_alloc(generic_tfm, GFP_KERNEL);
if (!generic_req) {
err = -ENOMEM;
goto out;
}
/* Check the algorithm properties for consistency. */
if (crypto_aead_maxauthsize(tfm) !=
crypto_aead_maxauthsize(generic_tfm)) {
pr_err("alg: aead: maxauthsize for %s (%u) doesn't match generic impl (%u)\n",
driver, crypto_aead_maxauthsize(tfm),
crypto_aead_maxauthsize(generic_tfm));
err = -EINVAL;
goto out;
}
if (crypto_aead_ivsize(tfm) != crypto_aead_ivsize(generic_tfm)) {
pr_err("alg: aead: ivsize for %s (%u) doesn't match generic impl (%u)\n",
driver, crypto_aead_ivsize(tfm),
crypto_aead_ivsize(generic_tfm));
err = -EINVAL;
goto out;
}
if (crypto_aead_blocksize(tfm) != crypto_aead_blocksize(generic_tfm)) {
pr_err("alg: aead: blocksize for %s (%u) doesn't match generic impl (%u)\n",
driver, crypto_aead_blocksize(tfm),
crypto_aead_blocksize(generic_tfm));
err = -EINVAL;
goto out;
}
/*
* Now generate test vectors using the generic implementation, and test
* the other implementation against them.
*/
for (i = 0; i < fuzz_iterations * 8; i++) {
generate_random_aead_testvec(generic_req, &ctx->vec,
&ctx->test_desc->suite.aead,
ctx->maxkeysize, ctx->maxdatasize,
ctx->vec_name,
sizeof(ctx->vec_name), false);
generate_random_testvec_config(&ctx->cfg, ctx->cfgname,
sizeof(ctx->cfgname));
if (!ctx->vec.novrfy) {
err = test_aead_vec_cfg(driver, ENCRYPT, &ctx->vec,
ctx->vec_name, &ctx->cfg,
ctx->req, ctx->tsgls);
if (err)
goto out;
}
if (ctx->vec.crypt_error == 0 || ctx->vec.novrfy) {
err = test_aead_vec_cfg(driver, DECRYPT, &ctx->vec,
ctx->vec_name, &ctx->cfg,
ctx->req, ctx->tsgls);
if (err)
goto out;
}
cond_resched();
}
err = 0;
out:
crypto_free_aead(generic_tfm);
aead_request_free(generic_req);
return err;
}
static int test_aead_extra(const char *driver,
const struct alg_test_desc *test_desc,
struct aead_request *req,
struct cipher_test_sglists *tsgls)
{
struct aead_extra_tests_ctx *ctx;
unsigned int i;
int err;
if (noextratests)
return 0;
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->req = req;
ctx->tfm = crypto_aead_reqtfm(req);
ctx->driver = driver;
ctx->test_desc = test_desc;
ctx->tsgls = tsgls;
ctx->maxdatasize = (2 * PAGE_SIZE) - TESTMGR_POISON_LEN;
ctx->maxkeysize = 0;
for (i = 0; i < test_desc->suite.aead.count; i++)
ctx->maxkeysize = max_t(unsigned int, ctx->maxkeysize,
test_desc->suite.aead.vecs[i].klen);
ctx->vec.key = kmalloc(ctx->maxkeysize, GFP_KERNEL);
ctx->vec.iv = kmalloc(crypto_aead_ivsize(ctx->tfm), GFP_KERNEL);
ctx->vec.assoc = kmalloc(ctx->maxdatasize, GFP_KERNEL);
ctx->vec.ptext = kmalloc(ctx->maxdatasize, GFP_KERNEL);
ctx->vec.ctext = kmalloc(ctx->maxdatasize, GFP_KERNEL);
if (!ctx->vec.key || !ctx->vec.iv || !ctx->vec.assoc ||
!ctx->vec.ptext || !ctx->vec.ctext) {
err = -ENOMEM;
goto out;
}
err = test_aead_vs_generic_impl(ctx);
if (err)
goto out;
err = test_aead_inauthentic_inputs(ctx);
out:
kfree(ctx->vec.key);
kfree(ctx->vec.iv);
kfree(ctx->vec.assoc);
kfree(ctx->vec.ptext);
kfree(ctx->vec.ctext);
kfree(ctx);
return err;
}
#else /* !CONFIG_CRYPTO_MANAGER_EXTRA_TESTS */
static int test_aead_extra(const char *driver,
const struct alg_test_desc *test_desc,
struct aead_request *req,
struct cipher_test_sglists *tsgls)
{
return 0;
}
#endif /* !CONFIG_CRYPTO_MANAGER_EXTRA_TESTS */
static int test_aead(const char *driver, int enc,
const struct aead_test_suite *suite,
struct aead_request *req,
struct cipher_test_sglists *tsgls)
{
unsigned int i;
int err;
for (i = 0; i < suite->count; i++) {
err = test_aead_vec(driver, enc, &suite->vecs[i], i, req,
tsgls);
if (err)
return err;
cond_resched();
}
return 0;
}
static int alg_test_aead(const struct alg_test_desc *desc, const char *driver,
u32 type, u32 mask)
{
const struct aead_test_suite *suite = &desc->suite.aead;
struct crypto_aead *tfm;
struct aead_request *req = NULL;
struct cipher_test_sglists *tsgls = NULL;
int err;
if (suite->count <= 0) {
pr_err("alg: aead: empty test suite for %s\n", driver);
return -EINVAL;
}
tfm = crypto_alloc_aead(driver, type, mask);
if (IS_ERR(tfm)) {
pr_err("alg: aead: failed to allocate transform for %s: %ld\n",
driver, PTR_ERR(tfm));
return PTR_ERR(tfm);
}
req = aead_request_alloc(tfm, GFP_KERNEL);
if (!req) {
pr_err("alg: aead: failed to allocate request for %s\n",
driver);
err = -ENOMEM;
goto out;
}
tsgls = alloc_cipher_test_sglists();
if (!tsgls) {
pr_err("alg: aead: failed to allocate test buffers for %s\n",
driver);
err = -ENOMEM;
goto out;
}
err = test_aead(driver, ENCRYPT, suite, req, tsgls);
if (err)
goto out;
err = test_aead(driver, DECRYPT, suite, req, tsgls);
if (err)
goto out;
err = test_aead_extra(driver, desc, req, tsgls);
out:
free_cipher_test_sglists(tsgls);
aead_request_free(req);
crypto_free_aead(tfm);
return err;
}
static int test_cipher(struct crypto_cipher *tfm, int enc,
const struct cipher_testvec *template,
unsigned int tcount)
{
const char *algo = crypto_tfm_alg_driver_name(crypto_cipher_tfm(tfm));
unsigned int i, j, k;
char *q;
const char *e;
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
const char *input, *result;
void *data;
char *xbuf[XBUFSIZE];
int ret = -ENOMEM;
if (testmgr_alloc_buf(xbuf))
goto out_nobuf;
if (enc == ENCRYPT)
e = "encryption";
else
e = "decryption";
j = 0;
for (i = 0; i < tcount; i++) {
if (fips_enabled && template[i].fips_skip)
continue;
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
input = enc ? template[i].ptext : template[i].ctext;
result = enc ? template[i].ctext : template[i].ptext;
j++;
ret = -EINVAL;
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
if (WARN_ON(template[i].len > PAGE_SIZE))
goto out;
data = xbuf[0];
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
memcpy(data, input, template[i].len);
crypto_cipher_clear_flags(tfm, ~0);
if (template[i].wk)
crypto_cipher_set_flags(tfm, CRYPTO_TFM_REQ_FORBID_WEAK_KEYS);
ret = crypto_cipher_setkey(tfm, template[i].key,
template[i].klen);
if (ret) {
if (ret == template[i].setkey_error)
continue;
pr_err("alg: cipher: %s setkey failed on test vector %u; expected_error=%d, actual_error=%d, flags=%#x\n",
algo, j, template[i].setkey_error, ret,
crypto_cipher_get_flags(tfm));
goto out;
}
if (template[i].setkey_error) {
pr_err("alg: cipher: %s setkey unexpectedly succeeded on test vector %u; expected_error=%d\n",
algo, j, template[i].setkey_error);
ret = -EINVAL;
goto out;
}
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
for (k = 0; k < template[i].len;
k += crypto_cipher_blocksize(tfm)) {
if (enc)
crypto_cipher_encrypt_one(tfm, data + k,
data + k);
else
crypto_cipher_decrypt_one(tfm, data + k,
data + k);
}
q = data;
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
if (memcmp(q, result, template[i].len)) {
printk(KERN_ERR "alg: cipher: Test %d failed "
"on %s for %s\n", j, e, algo);
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
hexdump(q, template[i].len);
ret = -EINVAL;
goto out;
}
}
ret = 0;
out:
testmgr_free_buf(xbuf);
out_nobuf:
return ret;
}
static int test_skcipher_vec_cfg(const char *driver, int enc,
const struct cipher_testvec *vec,
const char *vec_name,
const struct testvec_config *cfg,
struct skcipher_request *req,
struct cipher_test_sglists *tsgls)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
const unsigned int alignmask = crypto_skcipher_alignmask(tfm);
const unsigned int ivsize = crypto_skcipher_ivsize(tfm);
const u32 req_flags = CRYPTO_TFM_REQ_MAY_BACKLOG | cfg->req_flags;
const char *op = enc ? "encryption" : "decryption";
DECLARE_CRYPTO_WAIT(wait);
u8 _iv[3 * (MAX_ALGAPI_ALIGNMASK + 1) + MAX_IVLEN];
u8 *iv = PTR_ALIGN(&_iv[0], 2 * (MAX_ALGAPI_ALIGNMASK + 1)) +
cfg->iv_offset +
(cfg->iv_offset_relative_to_alignmask ? alignmask : 0);
struct kvec input;
int err;
/* Set the key */
if (vec->wk)
crypto_skcipher_set_flags(tfm, CRYPTO_TFM_REQ_FORBID_WEAK_KEYS);
else
crypto_skcipher_clear_flags(tfm,
CRYPTO_TFM_REQ_FORBID_WEAK_KEYS);
err = do_setkey(crypto_skcipher_setkey, tfm, vec->key, vec->klen,
cfg, alignmask);
if (err) {
if (err == vec->setkey_error)
return 0;
pr_err("alg: skcipher: %s setkey failed on test vector %s; expected_error=%d, actual_error=%d, flags=%#x\n",
driver, vec_name, vec->setkey_error, err,
crypto_skcipher_get_flags(tfm));
return err;
}
if (vec->setkey_error) {
pr_err("alg: skcipher: %s setkey unexpectedly succeeded on test vector %s; expected_error=%d\n",
driver, vec_name, vec->setkey_error);
return -EINVAL;
}
/* The IV must be copied to a buffer, as the algorithm may modify it */
if (ivsize) {
if (WARN_ON(ivsize > MAX_IVLEN))
return -EINVAL;
if (vec->generates_iv && !enc)
memcpy(iv, vec->iv_out, ivsize);
else if (vec->iv)
memcpy(iv, vec->iv, ivsize);
else
memset(iv, 0, ivsize);
} else {
if (vec->generates_iv) {
pr_err("alg: skcipher: %s has ivsize=0 but test vector %s generates IV!\n",
driver, vec_name);
return -EINVAL;
}
iv = NULL;
}
/* Build the src/dst scatterlists */
input.iov_base = enc ? (void *)vec->ptext : (void *)vec->ctext;
input.iov_len = vec->len;
err = build_cipher_test_sglists(tsgls, cfg, alignmask,
vec->len, vec->len, &input, 1);
if (err) {
pr_err("alg: skcipher: %s %s: error preparing scatterlists for test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
return err;
}
/* Do the actual encryption or decryption */
testmgr_poison(req->__ctx, crypto_skcipher_reqsize(tfm));
skcipher_request_set_callback(req, req_flags, crypto_req_done, &wait);
skcipher_request_set_crypt(req, tsgls->src.sgl_ptr, tsgls->dst.sgl_ptr,
vec->len, iv);
if (cfg->nosimd)
crypto_disable_simd_for_test();
err = enc ? crypto_skcipher_encrypt(req) : crypto_skcipher_decrypt(req);
if (cfg->nosimd)
crypto_reenable_simd_for_test();
err = crypto_wait_req(err, &wait);
/* Check that the algorithm didn't overwrite things it shouldn't have */
if (req->cryptlen != vec->len ||
req->iv != iv ||
req->src != tsgls->src.sgl_ptr ||
req->dst != tsgls->dst.sgl_ptr ||
crypto_skcipher_reqtfm(req) != tfm ||
req->base.complete != crypto_req_done ||
req->base.flags != req_flags ||
req->base.data != &wait) {
pr_err("alg: skcipher: %s %s corrupted request struct on test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
if (req->cryptlen != vec->len)
pr_err("alg: skcipher: changed 'req->cryptlen'\n");
if (req->iv != iv)
pr_err("alg: skcipher: changed 'req->iv'\n");
if (req->src != tsgls->src.sgl_ptr)
pr_err("alg: skcipher: changed 'req->src'\n");
if (req->dst != tsgls->dst.sgl_ptr)
pr_err("alg: skcipher: changed 'req->dst'\n");
if (crypto_skcipher_reqtfm(req) != tfm)
pr_err("alg: skcipher: changed 'req->base.tfm'\n");
if (req->base.complete != crypto_req_done)
pr_err("alg: skcipher: changed 'req->base.complete'\n");
if (req->base.flags != req_flags)
pr_err("alg: skcipher: changed 'req->base.flags'\n");
if (req->base.data != &wait)
pr_err("alg: skcipher: changed 'req->base.data'\n");
return -EINVAL;
}
if (is_test_sglist_corrupted(&tsgls->src)) {
pr_err("alg: skcipher: %s %s corrupted src sgl on test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
return -EINVAL;
}
if (tsgls->dst.sgl_ptr != tsgls->src.sgl &&
is_test_sglist_corrupted(&tsgls->dst)) {
pr_err("alg: skcipher: %s %s corrupted dst sgl on test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
return -EINVAL;
}
/* Check for success or failure */
if (err) {
if (err == vec->crypt_error)
return 0;
pr_err("alg: skcipher: %s %s failed on test vector %s; expected_error=%d, actual_error=%d, cfg=\"%s\"\n",
driver, op, vec_name, vec->crypt_error, err, cfg->name);
return err;
}
if (vec->crypt_error) {
pr_err("alg: skcipher: %s %s unexpectedly succeeded on test vector %s; expected_error=%d, cfg=\"%s\"\n",
driver, op, vec_name, vec->crypt_error, cfg->name);
return -EINVAL;
}
/* Check for the correct output (ciphertext or plaintext) */
err = verify_correct_output(&tsgls->dst, enc ? vec->ctext : vec->ptext,
vec->len, 0, true);
if (err == -EOVERFLOW) {
pr_err("alg: skcipher: %s %s overran dst buffer on test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
return err;
}
if (err) {
pr_err("alg: skcipher: %s %s test failed (wrong result) on test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
return err;
}
/* If applicable, check that the algorithm generated the correct IV */
if (vec->iv_out && memcmp(iv, vec->iv_out, ivsize) != 0) {
pr_err("alg: skcipher: %s %s test failed (wrong output IV) on test vector %s, cfg=\"%s\"\n",
driver, op, vec_name, cfg->name);
hexdump(iv, ivsize);
return -EINVAL;
}
return 0;
}
static int test_skcipher_vec(const char *driver, int enc,
const struct cipher_testvec *vec,
unsigned int vec_num,
struct skcipher_request *req,
struct cipher_test_sglists *tsgls)
{
char vec_name[16];
unsigned int i;
int err;
if (fips_enabled && vec->fips_skip)
return 0;
sprintf(vec_name, "%u", vec_num);
for (i = 0; i < ARRAY_SIZE(default_cipher_testvec_configs); i++) {
err = test_skcipher_vec_cfg(driver, enc, vec, vec_name,
&default_cipher_testvec_configs[i],
req, tsgls);
if (err)
return err;
}
#ifdef CONFIG_CRYPTO_MANAGER_EXTRA_TESTS
if (!noextratests) {
struct testvec_config cfg;
char cfgname[TESTVEC_CONFIG_NAMELEN];
for (i = 0; i < fuzz_iterations; i++) {
generate_random_testvec_config(&cfg, cfgname,
sizeof(cfgname));
err = test_skcipher_vec_cfg(driver, enc, vec, vec_name,
&cfg, req, tsgls);
if (err)
return err;
cond_resched();
}
}
#endif
return 0;
}
#ifdef CONFIG_CRYPTO_MANAGER_EXTRA_TESTS
/*
* Generate a symmetric cipher test vector from the given implementation.
* Assumes the buffers in 'vec' were already allocated.
*/
static void generate_random_cipher_testvec(struct skcipher_request *req,
struct cipher_testvec *vec,
unsigned int maxdatasize,
char *name, size_t max_namelen)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
const unsigned int maxkeysize = crypto_skcipher_max_keysize(tfm);
const unsigned int ivsize = crypto_skcipher_ivsize(tfm);
struct scatterlist src, dst;
u8 iv[MAX_IVLEN];
DECLARE_CRYPTO_WAIT(wait);
/* Key: length in [0, maxkeysize], but usually choose maxkeysize */
vec->klen = maxkeysize;
if (prandom_u32() % 4 == 0)
vec->klen = prandom_u32() % (maxkeysize + 1);
generate_random_bytes((u8 *)vec->key, vec->klen);
vec->setkey_error = crypto_skcipher_setkey(tfm, vec->key, vec->klen);
/* IV */
generate_random_bytes((u8 *)vec->iv, ivsize);
/* Plaintext */
vec->len = generate_random_length(maxdatasize);
generate_random_bytes((u8 *)vec->ptext, vec->len);
/* If the key couldn't be set, no need to continue to encrypt. */
if (vec->setkey_error)
goto done;
/* Ciphertext */
sg_init_one(&src, vec->ptext, vec->len);
sg_init_one(&dst, vec->ctext, vec->len);
memcpy(iv, vec->iv, ivsize);
skcipher_request_set_callback(req, 0, crypto_req_done, &wait);
skcipher_request_set_crypt(req, &src, &dst, vec->len, iv);
vec->crypt_error = crypto_wait_req(crypto_skcipher_encrypt(req), &wait);
if (vec->crypt_error != 0) {
/*
* The only acceptable error here is for an invalid length, so
* skcipher decryption should fail with the same error too.
* We'll test for this. But to keep the API usage well-defined,
* explicitly initialize the ciphertext buffer too.
*/
memset((u8 *)vec->ctext, 0, vec->len);
}
done:
snprintf(name, max_namelen, "\"random: len=%u klen=%u\"",
vec->len, vec->klen);
}
/*
* Test the skcipher algorithm represented by @req against the corresponding
* generic implementation, if one is available.
*/
static int test_skcipher_vs_generic_impl(const char *driver,
const char *generic_driver,
struct skcipher_request *req,
struct cipher_test_sglists *tsgls)
{
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
const unsigned int maxkeysize = crypto_skcipher_max_keysize(tfm);
const unsigned int ivsize = crypto_skcipher_ivsize(tfm);
const unsigned int blocksize = crypto_skcipher_blocksize(tfm);
const unsigned int maxdatasize = (2 * PAGE_SIZE) - TESTMGR_POISON_LEN;
const char *algname = crypto_skcipher_alg(tfm)->base.cra_name;
char _generic_driver[CRYPTO_MAX_ALG_NAME];
struct crypto_skcipher *generic_tfm = NULL;
struct skcipher_request *generic_req = NULL;
unsigned int i;
struct cipher_testvec vec = { 0 };
char vec_name[64];
struct testvec_config *cfg;
char cfgname[TESTVEC_CONFIG_NAMELEN];
int err;
if (noextratests)
return 0;
/* Keywrap isn't supported here yet as it handles its IV differently. */
if (strncmp(algname, "kw(", 3) == 0)
return 0;
if (!generic_driver) { /* Use default naming convention? */
err = build_generic_driver_name(algname, _generic_driver);
if (err)
return err;
generic_driver = _generic_driver;
}
if (strcmp(generic_driver, driver) == 0) /* Already the generic impl? */
return 0;
generic_tfm = crypto_alloc_skcipher(generic_driver, 0, 0);
if (IS_ERR(generic_tfm)) {
err = PTR_ERR(generic_tfm);
if (err == -ENOENT) {
pr_warn("alg: skcipher: skipping comparison tests for %s because %s is unavailable\n",
driver, generic_driver);
return 0;
}
pr_err("alg: skcipher: error allocating %s (generic impl of %s): %d\n",
generic_driver, algname, err);
return err;
}
cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
if (!cfg) {
err = -ENOMEM;
goto out;
}
generic_req = skcipher_request_alloc(generic_tfm, GFP_KERNEL);
if (!generic_req) {
err = -ENOMEM;
goto out;
}
/* Check the algorithm properties for consistency. */
if (crypto_skcipher_min_keysize(tfm) !=
crypto_skcipher_min_keysize(generic_tfm)) {
pr_err("alg: skcipher: min keysize for %s (%u) doesn't match generic impl (%u)\n",
driver, crypto_skcipher_min_keysize(tfm),
crypto_skcipher_min_keysize(generic_tfm));
err = -EINVAL;
goto out;
}
if (maxkeysize != crypto_skcipher_max_keysize(generic_tfm)) {
pr_err("alg: skcipher: max keysize for %s (%u) doesn't match generic impl (%u)\n",
driver, maxkeysize,
crypto_skcipher_max_keysize(generic_tfm));
err = -EINVAL;
goto out;
}
if (ivsize != crypto_skcipher_ivsize(generic_tfm)) {
pr_err("alg: skcipher: ivsize for %s (%u) doesn't match generic impl (%u)\n",
driver, ivsize, crypto_skcipher_ivsize(generic_tfm));
err = -EINVAL;
goto out;
}
if (blocksize != crypto_skcipher_blocksize(generic_tfm)) {
pr_err("alg: skcipher: blocksize for %s (%u) doesn't match generic impl (%u)\n",
driver, blocksize,
crypto_skcipher_blocksize(generic_tfm));
err = -EINVAL;
goto out;
}
/*
* Now generate test vectors using the generic implementation, and test
* the other implementation against them.
*/
vec.key = kmalloc(maxkeysize, GFP_KERNEL);
vec.iv = kmalloc(ivsize, GFP_KERNEL);
vec.ptext = kmalloc(maxdatasize, GFP_KERNEL);
vec.ctext = kmalloc(maxdatasize, GFP_KERNEL);
if (!vec.key || !vec.iv || !vec.ptext || !vec.ctext) {
err = -ENOMEM;
goto out;
}
for (i = 0; i < fuzz_iterations * 8; i++) {
generate_random_cipher_testvec(generic_req, &vec, maxdatasize,
vec_name, sizeof(vec_name));
generate_random_testvec_config(cfg, cfgname, sizeof(cfgname));
err = test_skcipher_vec_cfg(driver, ENCRYPT, &vec, vec_name,
cfg, req, tsgls);
if (err)
goto out;
err = test_skcipher_vec_cfg(driver, DECRYPT, &vec, vec_name,
cfg, req, tsgls);
if (err)
goto out;
cond_resched();
}
err = 0;
out:
kfree(cfg);
kfree(vec.key);
kfree(vec.iv);
kfree(vec.ptext);
kfree(vec.ctext);
crypto_free_skcipher(generic_tfm);
skcipher_request_free(generic_req);
return err;
}
#else /* !CONFIG_CRYPTO_MANAGER_EXTRA_TESTS */
static int test_skcipher_vs_generic_impl(const char *driver,
const char *generic_driver,
struct skcipher_request *req,
struct cipher_test_sglists *tsgls)
{
return 0;
}
#endif /* !CONFIG_CRYPTO_MANAGER_EXTRA_TESTS */
static int test_skcipher(const char *driver, int enc,
const struct cipher_test_suite *suite,
struct skcipher_request *req,
struct cipher_test_sglists *tsgls)
{
unsigned int i;
int err;
for (i = 0; i < suite->count; i++) {
err = test_skcipher_vec(driver, enc, &suite->vecs[i], i, req,
tsgls);
if (err)
return err;
cond_resched();
}
return 0;
}
static int alg_test_skcipher(const struct alg_test_desc *desc,
const char *driver, u32 type, u32 mask)
{
const struct cipher_test_suite *suite = &desc->suite.cipher;
struct crypto_skcipher *tfm;
struct skcipher_request *req = NULL;
struct cipher_test_sglists *tsgls = NULL;
int err;
if (suite->count <= 0) {
pr_err("alg: skcipher: empty test suite for %s\n", driver);
return -EINVAL;
}
tfm = crypto_alloc_skcipher(driver, type, mask);
if (IS_ERR(tfm)) {
pr_err("alg: skcipher: failed to allocate transform for %s: %ld\n",
driver, PTR_ERR(tfm));
return PTR_ERR(tfm);
}
req = skcipher_request_alloc(tfm, GFP_KERNEL);
if (!req) {
pr_err("alg: skcipher: failed to allocate request for %s\n",
driver);
err = -ENOMEM;
goto out;
}
tsgls = alloc_cipher_test_sglists();
if (!tsgls) {
pr_err("alg: skcipher: failed to allocate test buffers for %s\n",
driver);
err = -ENOMEM;
goto out;
}
err = test_skcipher(driver, ENCRYPT, suite, req, tsgls);
if (err)
goto out;
err = test_skcipher(driver, DECRYPT, suite, req, tsgls);
if (err)
goto out;
err = test_skcipher_vs_generic_impl(driver, desc->generic_driver, req,
tsgls);
out:
free_cipher_test_sglists(tsgls);
skcipher_request_free(req);
crypto_free_skcipher(tfm);
return err;
}
static int test_comp(struct crypto_comp *tfm,
const struct comp_testvec *ctemplate,
const struct comp_testvec *dtemplate,
int ctcount, int dtcount)
{
const char *algo = crypto_tfm_alg_driver_name(crypto_comp_tfm(tfm));
char *output, *decomp_output;
unsigned int i;
int ret;
output = kmalloc(COMP_BUF_SIZE, GFP_KERNEL);
if (!output)
return -ENOMEM;
decomp_output = kmalloc(COMP_BUF_SIZE, GFP_KERNEL);
if (!decomp_output) {
kfree(output);
return -ENOMEM;
}
for (i = 0; i < ctcount; i++) {
int ilen;
unsigned int dlen = COMP_BUF_SIZE;
memset(output, 0, COMP_BUF_SIZE);
memset(decomp_output, 0, COMP_BUF_SIZE);
ilen = ctemplate[i].inlen;
ret = crypto_comp_compress(tfm, ctemplate[i].input,
ilen, output, &dlen);
if (ret) {
printk(KERN_ERR "alg: comp: compression failed "
"on test %d for %s: ret=%d\n", i + 1, algo,
-ret);
goto out;
}
ilen = dlen;
dlen = COMP_BUF_SIZE;
ret = crypto_comp_decompress(tfm, output,
ilen, decomp_output, &dlen);
if (ret) {
pr_err("alg: comp: compression failed: decompress: on test %d for %s failed: ret=%d\n",
i + 1, algo, -ret);
goto out;
}
if (dlen != ctemplate[i].inlen) {
printk(KERN_ERR "alg: comp: Compression test %d "
"failed for %s: output len = %d\n", i + 1, algo,
dlen);
ret = -EINVAL;
goto out;
}
if (memcmp(decomp_output, ctemplate[i].input,
ctemplate[i].inlen)) {
pr_err("alg: comp: compression failed: output differs: on test %d for %s\n",
i + 1, algo);
hexdump(decomp_output, dlen);
ret = -EINVAL;
goto out;
}
}
for (i = 0; i < dtcount; i++) {
int ilen;
unsigned int dlen = COMP_BUF_SIZE;
memset(decomp_output, 0, COMP_BUF_SIZE);
ilen = dtemplate[i].inlen;
ret = crypto_comp_decompress(tfm, dtemplate[i].input,
ilen, decomp_output, &dlen);
if (ret) {
printk(KERN_ERR "alg: comp: decompression failed "
"on test %d for %s: ret=%d\n", i + 1, algo,
-ret);
goto out;
}
if (dlen != dtemplate[i].outlen) {
printk(KERN_ERR "alg: comp: Decompression test %d "
"failed for %s: output len = %d\n", i + 1, algo,
dlen);
ret = -EINVAL;
goto out;
}
if (memcmp(decomp_output, dtemplate[i].output, dlen)) {
printk(KERN_ERR "alg: comp: Decompression test %d "
"failed for %s\n", i + 1, algo);
hexdump(decomp_output, dlen);
ret = -EINVAL;
goto out;
}
}
ret = 0;
out:
kfree(decomp_output);
kfree(output);
return ret;
}
static int test_acomp(struct crypto_acomp *tfm,
const struct comp_testvec *ctemplate,
const struct comp_testvec *dtemplate,
int ctcount, int dtcount)
{
const char *algo = crypto_tfm_alg_driver_name(crypto_acomp_tfm(tfm));
unsigned int i;
char *output, *decomp_out;
int ret;
struct scatterlist src, dst;
struct acomp_req *req;
struct crypto_wait wait;
output = kmalloc(COMP_BUF_SIZE, GFP_KERNEL);
if (!output)
return -ENOMEM;
decomp_out = kmalloc(COMP_BUF_SIZE, GFP_KERNEL);
if (!decomp_out) {
kfree(output);
return -ENOMEM;
}
for (i = 0; i < ctcount; i++) {
unsigned int dlen = COMP_BUF_SIZE;
int ilen = ctemplate[i].inlen;
void *input_vec;
input_vec = kmemdup(ctemplate[i].input, ilen, GFP_KERNEL);
if (!input_vec) {
ret = -ENOMEM;
goto out;
}
memset(output, 0, dlen);
crypto_init_wait(&wait);
sg_init_one(&src, input_vec, ilen);
sg_init_one(&dst, output, dlen);
req = acomp_request_alloc(tfm);
if (!req) {
pr_err("alg: acomp: request alloc failed for %s\n",
algo);
kfree(input_vec);
ret = -ENOMEM;
goto out;
}
acomp_request_set_params(req, &src, &dst, ilen, dlen);
acomp_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
crypto_req_done, &wait);
ret = crypto_wait_req(crypto_acomp_compress(req), &wait);
if (ret) {
pr_err("alg: acomp: compression failed on test %d for %s: ret=%d\n",
i + 1, algo, -ret);
kfree(input_vec);
acomp_request_free(req);
goto out;
}
ilen = req->dlen;
dlen = COMP_BUF_SIZE;
sg_init_one(&src, output, ilen);
sg_init_one(&dst, decomp_out, dlen);
crypto_init_wait(&wait);
acomp_request_set_params(req, &src, &dst, ilen, dlen);
ret = crypto_wait_req(crypto_acomp_decompress(req), &wait);
if (ret) {
pr_err("alg: acomp: compression failed on test %d for %s: ret=%d\n",
i + 1, algo, -ret);
kfree(input_vec);
acomp_request_free(req);
goto out;
}
if (req->dlen != ctemplate[i].inlen) {
pr_err("alg: acomp: Compression test %d failed for %s: output len = %d\n",
i + 1, algo, req->dlen);
ret = -EINVAL;
kfree(input_vec);
acomp_request_free(req);
goto out;
}
if (memcmp(input_vec, decomp_out, req->dlen)) {
pr_err("alg: acomp: Compression test %d failed for %s\n",
i + 1, algo);
hexdump(output, req->dlen);
ret = -EINVAL;
kfree(input_vec);
acomp_request_free(req);
goto out;
}
kfree(input_vec);
acomp_request_free(req);
}
for (i = 0; i < dtcount; i++) {
unsigned int dlen = COMP_BUF_SIZE;
int ilen = dtemplate[i].inlen;
void *input_vec;
input_vec = kmemdup(dtemplate[i].input, ilen, GFP_KERNEL);
if (!input_vec) {
ret = -ENOMEM;
goto out;
}
memset(output, 0, dlen);
crypto_init_wait(&wait);
sg_init_one(&src, input_vec, ilen);
sg_init_one(&dst, output, dlen);
req = acomp_request_alloc(tfm);
if (!req) {
pr_err("alg: acomp: request alloc failed for %s\n",
algo);
kfree(input_vec);
ret = -ENOMEM;
goto out;
}
acomp_request_set_params(req, &src, &dst, ilen, dlen);
acomp_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
crypto_req_done, &wait);
ret = crypto_wait_req(crypto_acomp_decompress(req), &wait);
if (ret) {
pr_err("alg: acomp: decompression failed on test %d for %s: ret=%d\n",
i + 1, algo, -ret);
kfree(input_vec);
acomp_request_free(req);
goto out;
}
if (req->dlen != dtemplate[i].outlen) {
pr_err("alg: acomp: Decompression test %d failed for %s: output len = %d\n",
i + 1, algo, req->dlen);
ret = -EINVAL;
kfree(input_vec);
acomp_request_free(req);
goto out;
}
if (memcmp(output, dtemplate[i].output, req->dlen)) {
pr_err("alg: acomp: Decompression test %d failed for %s\n",
i + 1, algo);
hexdump(output, req->dlen);
ret = -EINVAL;
kfree(input_vec);
acomp_request_free(req);
goto out;
}
kfree(input_vec);
acomp_request_free(req);
}
ret = 0;
out:
kfree(decomp_out);
kfree(output);
return ret;
}
static int test_cprng(struct crypto_rng *tfm,
const struct cprng_testvec *template,
unsigned int tcount)
{
const char *algo = crypto_tfm_alg_driver_name(crypto_rng_tfm(tfm));
int err = 0, i, j, seedsize;
u8 *seed;
char result[32];
seedsize = crypto_rng_seedsize(tfm);
seed = kmalloc(seedsize, GFP_KERNEL);
if (!seed) {
printk(KERN_ERR "alg: cprng: Failed to allocate seed space "
"for %s\n", algo);
return -ENOMEM;
}
for (i = 0; i < tcount; i++) {
memset(result, 0, 32);
memcpy(seed, template[i].v, template[i].vlen);
memcpy(seed + template[i].vlen, template[i].key,
template[i].klen);
memcpy(seed + template[i].vlen + template[i].klen,
template[i].dt, template[i].dtlen);
err = crypto_rng_reset(tfm, seed, seedsize);
if (err) {
printk(KERN_ERR "alg: cprng: Failed to reset rng "
"for %s\n", algo);
goto out;
}
for (j = 0; j < template[i].loops; j++) {
err = crypto_rng_get_bytes(tfm, result,
template[i].rlen);
if (err < 0) {
printk(KERN_ERR "alg: cprng: Failed to obtain "
"the correct amount of random data for "
"%s (requested %d)\n", algo,
template[i].rlen);
goto out;
}
}
err = memcmp(result, template[i].result,
template[i].rlen);
if (err) {
printk(KERN_ERR "alg: cprng: Test %d failed for %s\n",
i, algo);
hexdump(result, template[i].rlen);
err = -EINVAL;
goto out;
}
}
out:
kfree(seed);
return err;
}
static int alg_test_cipher(const struct alg_test_desc *desc,
const char *driver, u32 type, u32 mask)
{
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
const struct cipher_test_suite *suite = &desc->suite.cipher;
struct crypto_cipher *tfm;
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
int err;
tfm = crypto_alloc_cipher(driver, type, mask);
if (IS_ERR(tfm)) {
printk(KERN_ERR "alg: cipher: Failed to load transform for "
"%s: %ld\n", driver, PTR_ERR(tfm));
return PTR_ERR(tfm);
}
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
err = test_cipher(tfm, ENCRYPT, suite->vecs, suite->count);
if (!err)
err = test_cipher(tfm, DECRYPT, suite->vecs, suite->count);
crypto_free_cipher(tfm);
return err;
}
static int alg_test_comp(const struct alg_test_desc *desc, const char *driver,
u32 type, u32 mask)
{
struct crypto_comp *comp;
struct crypto_acomp *acomp;
int err;
u32 algo_type = type & CRYPTO_ALG_TYPE_ACOMPRESS_MASK;
if (algo_type == CRYPTO_ALG_TYPE_ACOMPRESS) {
acomp = crypto_alloc_acomp(driver, type, mask);
if (IS_ERR(acomp)) {
pr_err("alg: acomp: Failed to load transform for %s: %ld\n",
driver, PTR_ERR(acomp));
return PTR_ERR(acomp);
}
err = test_acomp(acomp, desc->suite.comp.comp.vecs,
desc->suite.comp.decomp.vecs,
desc->suite.comp.comp.count,
desc->suite.comp.decomp.count);
crypto_free_acomp(acomp);
} else {
comp = crypto_alloc_comp(driver, type, mask);
if (IS_ERR(comp)) {
pr_err("alg: comp: Failed to load transform for %s: %ld\n",
driver, PTR_ERR(comp));
return PTR_ERR(comp);
}
err = test_comp(comp, desc->suite.comp.comp.vecs,
desc->suite.comp.decomp.vecs,
desc->suite.comp.comp.count,
desc->suite.comp.decomp.count);
crypto_free_comp(comp);
}
return err;
}
static int alg_test_crc32c(const struct alg_test_desc *desc,
const char *driver, u32 type, u32 mask)
{
struct crypto_shash *tfm;
__le32 val;
int err;
err = alg_test_hash(desc, driver, type, mask);
if (err)
return err;
tfm = crypto_alloc_shash(driver, type, mask);
if (IS_ERR(tfm)) {
if (PTR_ERR(tfm) == -ENOENT) {
/*
* This crc32c implementation is only available through
* ahash API, not the shash API, so the remaining part
* of the test is not applicable to it.
*/
return 0;
}
printk(KERN_ERR "alg: crc32c: Failed to load transform for %s: "
"%ld\n", driver, PTR_ERR(tfm));
return PTR_ERR(tfm);
}
do {
SHASH_DESC_ON_STACK(shash, tfm);
u32 *ctx = (u32 *)shash_desc_ctx(shash);
shash->tfm = tfm;
*ctx = 420553207;
err = crypto_shash_final(shash, (u8 *)&val);
if (err) {
printk(KERN_ERR "alg: crc32c: Operation failed for "
"%s: %d\n", driver, err);
break;
}
if (val != cpu_to_le32(~420553207)) {
pr_err("alg: crc32c: Test failed for %s: %u\n",
driver, le32_to_cpu(val));
err = -EINVAL;
}
} while (0);
crypto_free_shash(tfm);
return err;
}
static int alg_test_cprng(const struct alg_test_desc *desc, const char *driver,
u32 type, u32 mask)
{
struct crypto_rng *rng;
int err;
rng = crypto_alloc_rng(driver, type, mask);
if (IS_ERR(rng)) {
printk(KERN_ERR "alg: cprng: Failed to load transform for %s: "
"%ld\n", driver, PTR_ERR(rng));
return PTR_ERR(rng);
}
err = test_cprng(rng, desc->suite.cprng.vecs, desc->suite.cprng.count);
crypto_free_rng(rng);
return err;
}
static int drbg_cavs_test(const struct drbg_testvec *test, int pr,
const char *driver, u32 type, u32 mask)
{
int ret = -EAGAIN;
struct crypto_rng *drng;
struct drbg_test_data test_data;
struct drbg_string addtl, pers, testentropy;
unsigned char *buf = kzalloc(test->expectedlen, GFP_KERNEL);
if (!buf)
return -ENOMEM;
drng = crypto_alloc_rng(driver, type, mask);
if (IS_ERR(drng)) {
printk(KERN_ERR "alg: drbg: could not allocate DRNG handle for "
"%s\n", driver);
mm, treewide: rename kzfree() to kfree_sensitive() As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 09:18:13 +03:00
kfree_sensitive(buf);
return -ENOMEM;
}
test_data.testentropy = &testentropy;
drbg_string_fill(&testentropy, test->entropy, test->entropylen);
drbg_string_fill(&pers, test->pers, test->perslen);
ret = crypto_drbg_reset_test(drng, &pers, &test_data);
if (ret) {
printk(KERN_ERR "alg: drbg: Failed to reset rng\n");
goto outbuf;
}
drbg_string_fill(&addtl, test->addtla, test->addtllen);
if (pr) {
drbg_string_fill(&testentropy, test->entpra, test->entprlen);
ret = crypto_drbg_get_bytes_addtl_test(drng,
buf, test->expectedlen, &addtl, &test_data);
} else {
ret = crypto_drbg_get_bytes_addtl(drng,
buf, test->expectedlen, &addtl);
}
if (ret < 0) {
printk(KERN_ERR "alg: drbg: could not obtain random data for "
"driver %s\n", driver);
goto outbuf;
}
drbg_string_fill(&addtl, test->addtlb, test->addtllen);
if (pr) {
drbg_string_fill(&testentropy, test->entprb, test->entprlen);
ret = crypto_drbg_get_bytes_addtl_test(drng,
buf, test->expectedlen, &addtl, &test_data);
} else {
ret = crypto_drbg_get_bytes_addtl(drng,
buf, test->expectedlen, &addtl);
}
if (ret < 0) {
printk(KERN_ERR "alg: drbg: could not obtain random data for "
"driver %s\n", driver);
goto outbuf;
}
ret = memcmp(test->expected, buf, test->expectedlen);
outbuf:
crypto_free_rng(drng);
mm, treewide: rename kzfree() to kfree_sensitive() As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 09:18:13 +03:00
kfree_sensitive(buf);
return ret;
}
static int alg_test_drbg(const struct alg_test_desc *desc, const char *driver,
u32 type, u32 mask)
{
int err = 0;
int pr = 0;
int i = 0;
const struct drbg_testvec *template = desc->suite.drbg.vecs;
unsigned int tcount = desc->suite.drbg.count;
if (0 == memcmp(driver, "drbg_pr_", 8))
pr = 1;
for (i = 0; i < tcount; i++) {
err = drbg_cavs_test(&template[i], pr, driver, type, mask);
if (err) {
printk(KERN_ERR "alg: drbg: Test %d failed for %s\n",
i, driver);
err = -EINVAL;
break;
}
}
return err;
}
static int do_test_kpp(struct crypto_kpp *tfm, const struct kpp_testvec *vec,
const char *alg)
{
struct kpp_request *req;
void *input_buf = NULL;
void *output_buf = NULL;
void *a_public = NULL;
void *a_ss = NULL;
void *shared_secret = NULL;
struct crypto_wait wait;
unsigned int out_len_max;
int err = -ENOMEM;
struct scatterlist src, dst;
req = kpp_request_alloc(tfm, GFP_KERNEL);
if (!req)
return err;
crypto_init_wait(&wait);
err = crypto_kpp_set_secret(tfm, vec->secret, vec->secret_size);
if (err < 0)
goto free_req;
out_len_max = crypto_kpp_maxsize(tfm);
output_buf = kzalloc(out_len_max, GFP_KERNEL);
if (!output_buf) {
err = -ENOMEM;
goto free_req;
}
/* Use appropriate parameter as base */
kpp_request_set_input(req, NULL, 0);
sg_init_one(&dst, output_buf, out_len_max);
kpp_request_set_output(req, &dst, out_len_max);
kpp_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
crypto_req_done, &wait);
/* Compute party A's public key */
err = crypto_wait_req(crypto_kpp_generate_public_key(req), &wait);
if (err) {
pr_err("alg: %s: Party A: generate public key test failed. err %d\n",
alg, err);
goto free_output;
}
if (vec->genkey) {
/* Save party A's public key */
a_public = kmemdup(sg_virt(req->dst), out_len_max, GFP_KERNEL);
if (!a_public) {
err = -ENOMEM;
goto free_output;
}
} else {
/* Verify calculated public key */
if (memcmp(vec->expected_a_public, sg_virt(req->dst),
vec->expected_a_public_size)) {
pr_err("alg: %s: Party A: generate public key test failed. Invalid output\n",
alg);
err = -EINVAL;
goto free_output;
}
}
/* Calculate shared secret key by using counter part (b) public key. */
input_buf = kmemdup(vec->b_public, vec->b_public_size, GFP_KERNEL);
if (!input_buf) {
err = -ENOMEM;
goto free_output;
}
sg_init_one(&src, input_buf, vec->b_public_size);
sg_init_one(&dst, output_buf, out_len_max);
kpp_request_set_input(req, &src, vec->b_public_size);
kpp_request_set_output(req, &dst, out_len_max);
kpp_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
crypto_req_done, &wait);
err = crypto_wait_req(crypto_kpp_compute_shared_secret(req), &wait);
if (err) {
pr_err("alg: %s: Party A: compute shared secret test failed. err %d\n",
alg, err);
goto free_all;
}
if (vec->genkey) {
/* Save the shared secret obtained by party A */
a_ss = kmemdup(sg_virt(req->dst), vec->expected_ss_size, GFP_KERNEL);
if (!a_ss) {
err = -ENOMEM;
goto free_all;
}
/*
* Calculate party B's shared secret by using party A's
* public key.
*/
err = crypto_kpp_set_secret(tfm, vec->b_secret,
vec->b_secret_size);
if (err < 0)
goto free_all;
sg_init_one(&src, a_public, vec->expected_a_public_size);
sg_init_one(&dst, output_buf, out_len_max);
kpp_request_set_input(req, &src, vec->expected_a_public_size);
kpp_request_set_output(req, &dst, out_len_max);
kpp_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
crypto_req_done, &wait);
err = crypto_wait_req(crypto_kpp_compute_shared_secret(req),
&wait);
if (err) {
pr_err("alg: %s: Party B: compute shared secret failed. err %d\n",
alg, err);
goto free_all;
}
shared_secret = a_ss;
} else {
shared_secret = (void *)vec->expected_ss;
}
/*
* verify shared secret from which the user will derive
* secret key by executing whatever hash it has chosen
*/
if (memcmp(shared_secret, sg_virt(req->dst),
vec->expected_ss_size)) {
pr_err("alg: %s: compute shared secret test failed. Invalid output\n",
alg);
err = -EINVAL;
}
free_all:
kfree(a_ss);
kfree(input_buf);
free_output:
kfree(a_public);
kfree(output_buf);
free_req:
kpp_request_free(req);
return err;
}
static int test_kpp(struct crypto_kpp *tfm, const char *alg,
const struct kpp_testvec *vecs, unsigned int tcount)
{
int ret, i;
for (i = 0; i < tcount; i++) {
ret = do_test_kpp(tfm, vecs++, alg);
if (ret) {
pr_err("alg: %s: test failed on vector %d, err=%d\n",
alg, i + 1, ret);
return ret;
}
}
return 0;
}
static int alg_test_kpp(const struct alg_test_desc *desc, const char *driver,
u32 type, u32 mask)
{
struct crypto_kpp *tfm;
int err = 0;
tfm = crypto_alloc_kpp(driver, type, mask);
if (IS_ERR(tfm)) {
pr_err("alg: kpp: Failed to load tfm for %s: %ld\n",
driver, PTR_ERR(tfm));
return PTR_ERR(tfm);
}
if (desc->suite.kpp.vecs)
err = test_kpp(tfm, desc->alg, desc->suite.kpp.vecs,
desc->suite.kpp.count);
crypto_free_kpp(tfm);
return err;
}
static u8 *test_pack_u32(u8 *dst, u32 val)
{
memcpy(dst, &val, sizeof(val));
return dst + sizeof(val);
}
static int test_akcipher_one(struct crypto_akcipher *tfm,
const struct akcipher_testvec *vecs)
{
char *xbuf[XBUFSIZE];
struct akcipher_request *req;
void *outbuf_enc = NULL;
void *outbuf_dec = NULL;
struct crypto_wait wait;
unsigned int out_len_max, out_len = 0;
int err = -ENOMEM;
struct scatterlist src, dst, src_tab[3];
const char *m, *c;
unsigned int m_size, c_size;
const char *op;
u8 *key, *ptr;
if (testmgr_alloc_buf(xbuf))
return err;
req = akcipher_request_alloc(tfm, GFP_KERNEL);
if (!req)
goto free_xbuf;
crypto_init_wait(&wait);
key = kmalloc(vecs->key_len + sizeof(u32) * 2 + vecs->param_len,
GFP_KERNEL);
if (!key)
goto free_xbuf;
memcpy(key, vecs->key, vecs->key_len);
ptr = key + vecs->key_len;
ptr = test_pack_u32(ptr, vecs->algo);
ptr = test_pack_u32(ptr, vecs->param_len);
memcpy(ptr, vecs->params, vecs->param_len);
if (vecs->public_key_vec)
err = crypto_akcipher_set_pub_key(tfm, key, vecs->key_len);
else
err = crypto_akcipher_set_priv_key(tfm, key, vecs->key_len);
if (err)
goto free_req;
/*
* First run test which do not require a private key, such as
* encrypt or verify.
*/
err = -ENOMEM;
out_len_max = crypto_akcipher_maxsize(tfm);
outbuf_enc = kzalloc(out_len_max, GFP_KERNEL);
if (!outbuf_enc)
goto free_req;
if (!vecs->siggen_sigver_test) {
m = vecs->m;
m_size = vecs->m_size;
c = vecs->c;
c_size = vecs->c_size;
op = "encrypt";
} else {
/* Swap args so we could keep plaintext (digest)
* in vecs->m, and cooked signature in vecs->c.
*/
m = vecs->c; /* signature */
m_size = vecs->c_size;
c = vecs->m; /* digest */
c_size = vecs->m_size;
op = "verify";
}
if (WARN_ON(m_size > PAGE_SIZE))
goto free_all;
memcpy(xbuf[0], m, m_size);
sg_init_table(src_tab, 3);
sg_set_buf(&src_tab[0], xbuf[0], 8);
sg_set_buf(&src_tab[1], xbuf[0] + 8, m_size - 8);
if (vecs->siggen_sigver_test) {
if (WARN_ON(c_size > PAGE_SIZE))
goto free_all;
memcpy(xbuf[1], c, c_size);
sg_set_buf(&src_tab[2], xbuf[1], c_size);
akcipher_request_set_crypt(req, src_tab, NULL, m_size, c_size);
} else {
sg_init_one(&dst, outbuf_enc, out_len_max);
akcipher_request_set_crypt(req, src_tab, &dst, m_size,
out_len_max);
}
akcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
crypto_req_done, &wait);
err = crypto_wait_req(vecs->siggen_sigver_test ?
/* Run asymmetric signature verification */
crypto_akcipher_verify(req) :
/* Run asymmetric encrypt */
crypto_akcipher_encrypt(req), &wait);
if (err) {
pr_err("alg: akcipher: %s test failed. err %d\n", op, err);
goto free_all;
}
if (!vecs->siggen_sigver_test && c) {
if (req->dst_len != c_size) {
pr_err("alg: akcipher: %s test failed. Invalid output len\n",
op);
err = -EINVAL;
goto free_all;
}
/* verify that encrypted message is equal to expected */
if (memcmp(c, outbuf_enc, c_size) != 0) {
pr_err("alg: akcipher: %s test failed. Invalid output\n",
op);
hexdump(outbuf_enc, c_size);
err = -EINVAL;
goto free_all;
}
}
/*
* Don't invoke (decrypt or sign) test which require a private key
* for vectors with only a public key.
*/
if (vecs->public_key_vec) {
err = 0;
goto free_all;
}
outbuf_dec = kzalloc(out_len_max, GFP_KERNEL);
if (!outbuf_dec) {
err = -ENOMEM;
goto free_all;
}
if (!vecs->siggen_sigver_test && !c) {
c = outbuf_enc;
c_size = req->dst_len;
}
op = vecs->siggen_sigver_test ? "sign" : "decrypt";
if (WARN_ON(c_size > PAGE_SIZE))
goto free_all;
memcpy(xbuf[0], c, c_size);
sg_init_one(&src, xbuf[0], c_size);
sg_init_one(&dst, outbuf_dec, out_len_max);
crypto_init_wait(&wait);
akcipher_request_set_crypt(req, &src, &dst, c_size, out_len_max);
err = crypto_wait_req(vecs->siggen_sigver_test ?
/* Run asymmetric signature generation */
crypto_akcipher_sign(req) :
/* Run asymmetric decrypt */
crypto_akcipher_decrypt(req), &wait);
if (err) {
pr_err("alg: akcipher: %s test failed. err %d\n", op, err);
goto free_all;
}
out_len = req->dst_len;
if (out_len < m_size) {
pr_err("alg: akcipher: %s test failed. Invalid output len %u\n",
op, out_len);
err = -EINVAL;
goto free_all;
}
/* verify that decrypted message is equal to the original msg */
if (memchr_inv(outbuf_dec, 0, out_len - m_size) ||
memcmp(m, outbuf_dec + out_len - m_size, m_size)) {
pr_err("alg: akcipher: %s test failed. Invalid output\n", op);
hexdump(outbuf_dec, out_len);
err = -EINVAL;
}
free_all:
kfree(outbuf_dec);
kfree(outbuf_enc);
free_req:
akcipher_request_free(req);
kfree(key);
free_xbuf:
testmgr_free_buf(xbuf);
return err;
}
static int test_akcipher(struct crypto_akcipher *tfm, const char *alg,
const struct akcipher_testvec *vecs,
unsigned int tcount)
{
const char *algo =
crypto_tfm_alg_driver_name(crypto_akcipher_tfm(tfm));
int ret, i;
for (i = 0; i < tcount; i++) {
ret = test_akcipher_one(tfm, vecs++);
if (!ret)
continue;
pr_err("alg: akcipher: test %d failed for %s, err=%d\n",
i + 1, algo, ret);
return ret;
}
return 0;
}
static int alg_test_akcipher(const struct alg_test_desc *desc,
const char *driver, u32 type, u32 mask)
{
struct crypto_akcipher *tfm;
int err = 0;
tfm = crypto_alloc_akcipher(driver, type, mask);
if (IS_ERR(tfm)) {
pr_err("alg: akcipher: Failed to load tfm for %s: %ld\n",
driver, PTR_ERR(tfm));
return PTR_ERR(tfm);
}
if (desc->suite.akcipher.vecs)
err = test_akcipher(tfm, desc->alg, desc->suite.akcipher.vecs,
desc->suite.akcipher.count);
crypto_free_akcipher(tfm);
return err;
}
static int alg_test_null(const struct alg_test_desc *desc,
const char *driver, u32 type, u32 mask)
{
return 0;
}
#define ____VECS(tv) .vecs = tv, .count = ARRAY_SIZE(tv)
#define __VECS(tv) { ____VECS(tv) }
/* Please keep this list sorted by algorithm name. */
static const struct alg_test_desc alg_test_descs[] = {
{
crypto: adiantum - add Adiantum support Add support for the Adiantum encryption mode. Adiantum was designed by Paul Crowley and is specified by our paper: Adiantum: length-preserving encryption for entry-level processors (https://eprint.iacr.org/2018/720.pdf) See our paper for full details; this patch only provides an overview. Adiantum is a tweakable, length-preserving encryption mode designed for fast and secure disk encryption, especially on CPUs without dedicated crypto instructions. Adiantum encrypts each sector using the XChaCha12 stream cipher, two passes of an ε-almost-∆-universal (εA∆U) hash function, and an invocation of the AES-256 block cipher on a single 16-byte block. On CPUs without AES instructions, Adiantum is much faster than AES-XTS; for example, on ARM Cortex-A7, on 4096-byte sectors Adiantum encryption is about 4 times faster than AES-256-XTS encryption, and decryption about 5 times faster. Adiantum is a specialization of the more general HBSH construction. Our earlier proposal, HPolyC, was also a HBSH specialization, but it used a different εA∆U hash function, one based on Poly1305 only. Adiantum's εA∆U hash function, which is based primarily on the "NH" hash function like that used in UMAC (RFC4418), is about twice as fast as HPolyC's; consequently, Adiantum is about 20% faster than HPolyC. This speed comes with no loss of security: Adiantum is provably just as secure as HPolyC, in fact slightly *more* secure. Like HPolyC, Adiantum's security is reducible to that of XChaCha12 and AES-256, subject to a security bound. XChaCha12 itself has a security reduction to ChaCha12. Therefore, one need not "trust" Adiantum; one need only trust ChaCha12 and AES-256. Note that the εA∆U hash function is only used for its proven combinatorical properties so cannot be "broken". Adiantum is also a true wide-block encryption mode, so flipping any plaintext bit in the sector scrambles the entire ciphertext, and vice versa. No other such mode is available in the kernel currently; doing the same with XTS scrambles only 16 bytes. Adiantum also supports arbitrary-length tweaks and naturally supports any length input >= 16 bytes without needing "ciphertext stealing". For the stream cipher, Adiantum uses XChaCha12 rather than XChaCha20 in order to make encryption feasible on the widest range of devices. Although the 20-round variant is quite popular, the best known attacks on ChaCha are on only 7 rounds, so ChaCha12 still has a substantial security margin; in fact, larger than AES-256's. 12-round Salsa20 is also the eSTREAM recommendation. For the block cipher, Adiantum uses AES-256, despite it having a lower security margin than XChaCha12 and needing table lookups, due to AES's extensive adoption and analysis making it the obvious first choice. Nevertheless, for flexibility this patch also permits the "adiantum" template to be instantiated with XChaCha20 and/or with an alternate block cipher. We need Adiantum support in the kernel for use in dm-crypt and fscrypt, where currently the only other suitable options are block cipher modes such as AES-XTS. A big problem with this is that many low-end mobile devices (e.g. Android Go phones sold primarily in developing countries, as well as some smartwatches) still have CPUs that lack AES instructions, e.g. ARM Cortex-A7. Sadly, AES-XTS encryption is much too slow to be viable on these devices. We did find that some "lightweight" block ciphers are fast enough, but these suffer from problems such as not having much cryptanalysis or being too controversial. The ChaCha stream cipher has excellent performance but is insecure to use directly for disk encryption, since each sector's IV is reused each time it is overwritten. Even restricting the threat model to offline attacks only isn't enough, since modern flash storage devices don't guarantee that "overwrites" are really overwrites, due to wear-leveling. Adiantum avoids this problem by constructing a "tweakable super-pseudorandom permutation"; this is the strongest possible security model for length-preserving encryption. Of course, storing random nonces along with the ciphertext would be the ideal solution. But doing that with existing hardware and filesystems runs into major practical problems; in most cases it would require data journaling (like dm-integrity) which severely degrades performance. Thus, for now length-preserving encryption is still needed. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-17 04:26:31 +03:00
.alg = "adiantum(xchacha12,aes)",
.generic_driver = "adiantum(xchacha12-generic,aes-generic,nhpoly1305-generic)",
crypto: adiantum - add Adiantum support Add support for the Adiantum encryption mode. Adiantum was designed by Paul Crowley and is specified by our paper: Adiantum: length-preserving encryption for entry-level processors (https://eprint.iacr.org/2018/720.pdf) See our paper for full details; this patch only provides an overview. Adiantum is a tweakable, length-preserving encryption mode designed for fast and secure disk encryption, especially on CPUs without dedicated crypto instructions. Adiantum encrypts each sector using the XChaCha12 stream cipher, two passes of an ε-almost-∆-universal (εA∆U) hash function, and an invocation of the AES-256 block cipher on a single 16-byte block. On CPUs without AES instructions, Adiantum is much faster than AES-XTS; for example, on ARM Cortex-A7, on 4096-byte sectors Adiantum encryption is about 4 times faster than AES-256-XTS encryption, and decryption about 5 times faster. Adiantum is a specialization of the more general HBSH construction. Our earlier proposal, HPolyC, was also a HBSH specialization, but it used a different εA∆U hash function, one based on Poly1305 only. Adiantum's εA∆U hash function, which is based primarily on the "NH" hash function like that used in UMAC (RFC4418), is about twice as fast as HPolyC's; consequently, Adiantum is about 20% faster than HPolyC. This speed comes with no loss of security: Adiantum is provably just as secure as HPolyC, in fact slightly *more* secure. Like HPolyC, Adiantum's security is reducible to that of XChaCha12 and AES-256, subject to a security bound. XChaCha12 itself has a security reduction to ChaCha12. Therefore, one need not "trust" Adiantum; one need only trust ChaCha12 and AES-256. Note that the εA∆U hash function is only used for its proven combinatorical properties so cannot be "broken". Adiantum is also a true wide-block encryption mode, so flipping any plaintext bit in the sector scrambles the entire ciphertext, and vice versa. No other such mode is available in the kernel currently; doing the same with XTS scrambles only 16 bytes. Adiantum also supports arbitrary-length tweaks and naturally supports any length input >= 16 bytes without needing "ciphertext stealing". For the stream cipher, Adiantum uses XChaCha12 rather than XChaCha20 in order to make encryption feasible on the widest range of devices. Although the 20-round variant is quite popular, the best known attacks on ChaCha are on only 7 rounds, so ChaCha12 still has a substantial security margin; in fact, larger than AES-256's. 12-round Salsa20 is also the eSTREAM recommendation. For the block cipher, Adiantum uses AES-256, despite it having a lower security margin than XChaCha12 and needing table lookups, due to AES's extensive adoption and analysis making it the obvious first choice. Nevertheless, for flexibility this patch also permits the "adiantum" template to be instantiated with XChaCha20 and/or with an alternate block cipher. We need Adiantum support in the kernel for use in dm-crypt and fscrypt, where currently the only other suitable options are block cipher modes such as AES-XTS. A big problem with this is that many low-end mobile devices (e.g. Android Go phones sold primarily in developing countries, as well as some smartwatches) still have CPUs that lack AES instructions, e.g. ARM Cortex-A7. Sadly, AES-XTS encryption is much too slow to be viable on these devices. We did find that some "lightweight" block ciphers are fast enough, but these suffer from problems such as not having much cryptanalysis or being too controversial. The ChaCha stream cipher has excellent performance but is insecure to use directly for disk encryption, since each sector's IV is reused each time it is overwritten. Even restricting the threat model to offline attacks only isn't enough, since modern flash storage devices don't guarantee that "overwrites" are really overwrites, due to wear-leveling. Adiantum avoids this problem by constructing a "tweakable super-pseudorandom permutation"; this is the strongest possible security model for length-preserving encryption. Of course, storing random nonces along with the ciphertext would be the ideal solution. But doing that with existing hardware and filesystems runs into major practical problems; in most cases it would require data journaling (like dm-integrity) which severely degrades performance. Thus, for now length-preserving encryption is still needed. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-17 04:26:31 +03:00
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(adiantum_xchacha12_aes_tv_template)
},
}, {
.alg = "adiantum(xchacha20,aes)",
.generic_driver = "adiantum(xchacha20-generic,aes-generic,nhpoly1305-generic)",
crypto: adiantum - add Adiantum support Add support for the Adiantum encryption mode. Adiantum was designed by Paul Crowley and is specified by our paper: Adiantum: length-preserving encryption for entry-level processors (https://eprint.iacr.org/2018/720.pdf) See our paper for full details; this patch only provides an overview. Adiantum is a tweakable, length-preserving encryption mode designed for fast and secure disk encryption, especially on CPUs without dedicated crypto instructions. Adiantum encrypts each sector using the XChaCha12 stream cipher, two passes of an ε-almost-∆-universal (εA∆U) hash function, and an invocation of the AES-256 block cipher on a single 16-byte block. On CPUs without AES instructions, Adiantum is much faster than AES-XTS; for example, on ARM Cortex-A7, on 4096-byte sectors Adiantum encryption is about 4 times faster than AES-256-XTS encryption, and decryption about 5 times faster. Adiantum is a specialization of the more general HBSH construction. Our earlier proposal, HPolyC, was also a HBSH specialization, but it used a different εA∆U hash function, one based on Poly1305 only. Adiantum's εA∆U hash function, which is based primarily on the "NH" hash function like that used in UMAC (RFC4418), is about twice as fast as HPolyC's; consequently, Adiantum is about 20% faster than HPolyC. This speed comes with no loss of security: Adiantum is provably just as secure as HPolyC, in fact slightly *more* secure. Like HPolyC, Adiantum's security is reducible to that of XChaCha12 and AES-256, subject to a security bound. XChaCha12 itself has a security reduction to ChaCha12. Therefore, one need not "trust" Adiantum; one need only trust ChaCha12 and AES-256. Note that the εA∆U hash function is only used for its proven combinatorical properties so cannot be "broken". Adiantum is also a true wide-block encryption mode, so flipping any plaintext bit in the sector scrambles the entire ciphertext, and vice versa. No other such mode is available in the kernel currently; doing the same with XTS scrambles only 16 bytes. Adiantum also supports arbitrary-length tweaks and naturally supports any length input >= 16 bytes without needing "ciphertext stealing". For the stream cipher, Adiantum uses XChaCha12 rather than XChaCha20 in order to make encryption feasible on the widest range of devices. Although the 20-round variant is quite popular, the best known attacks on ChaCha are on only 7 rounds, so ChaCha12 still has a substantial security margin; in fact, larger than AES-256's. 12-round Salsa20 is also the eSTREAM recommendation. For the block cipher, Adiantum uses AES-256, despite it having a lower security margin than XChaCha12 and needing table lookups, due to AES's extensive adoption and analysis making it the obvious first choice. Nevertheless, for flexibility this patch also permits the "adiantum" template to be instantiated with XChaCha20 and/or with an alternate block cipher. We need Adiantum support in the kernel for use in dm-crypt and fscrypt, where currently the only other suitable options are block cipher modes such as AES-XTS. A big problem with this is that many low-end mobile devices (e.g. Android Go phones sold primarily in developing countries, as well as some smartwatches) still have CPUs that lack AES instructions, e.g. ARM Cortex-A7. Sadly, AES-XTS encryption is much too slow to be viable on these devices. We did find that some "lightweight" block ciphers are fast enough, but these suffer from problems such as not having much cryptanalysis or being too controversial. The ChaCha stream cipher has excellent performance but is insecure to use directly for disk encryption, since each sector's IV is reused each time it is overwritten. Even restricting the threat model to offline attacks only isn't enough, since modern flash storage devices don't guarantee that "overwrites" are really overwrites, due to wear-leveling. Adiantum avoids this problem by constructing a "tweakable super-pseudorandom permutation"; this is the strongest possible security model for length-preserving encryption. Of course, storing random nonces along with the ciphertext would be the ideal solution. But doing that with existing hardware and filesystems runs into major practical problems; in most cases it would require data journaling (like dm-integrity) which severely degrades performance. Thus, for now length-preserving encryption is still needed. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-17 04:26:31 +03:00
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(adiantum_xchacha20_aes_tv_template)
},
}, {
.alg = "aegis128",
.test = alg_test_aead,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(aegis128_tv_template)
}
}, {
.alg = "ansi_cprng",
.test = alg_test_cprng,
.suite = {
.cprng = __VECS(ansi_cprng_aes_tv_template)
}
}, {
.alg = "authenc(hmac(md5),ecb(cipher_null))",
.test = alg_test_aead,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_md5_ecb_cipher_null_tv_template)
}
}, {
.alg = "authenc(hmac(sha1),cbc(aes))",
.test = alg_test_aead,
.fips_allowed = 1,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha1_aes_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha1),cbc(des))",
.test = alg_test_aead,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha1_des_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha1),cbc(des3_ede))",
.test = alg_test_aead,
.fips_allowed = 1,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha1_des3_ede_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha1),ctr(aes))",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "authenc(hmac(sha1),ecb(cipher_null))",
.test = alg_test_aead,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha1_ecb_cipher_null_tv_temp)
}
}, {
.alg = "authenc(hmac(sha1),rfc3686(ctr(aes)))",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "authenc(hmac(sha224),cbc(des))",
.test = alg_test_aead,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha224_des_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha224),cbc(des3_ede))",
.test = alg_test_aead,
.fips_allowed = 1,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha224_des3_ede_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha256),cbc(aes))",
.test = alg_test_aead,
.fips_allowed = 1,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha256_aes_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha256),cbc(des))",
.test = alg_test_aead,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha256_des_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha256),cbc(des3_ede))",
.test = alg_test_aead,
.fips_allowed = 1,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha256_des3_ede_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha256),ctr(aes))",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "authenc(hmac(sha256),rfc3686(ctr(aes)))",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "authenc(hmac(sha384),cbc(des))",
.test = alg_test_aead,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha384_des_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha384),cbc(des3_ede))",
.test = alg_test_aead,
.fips_allowed = 1,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha384_des3_ede_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha384),ctr(aes))",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "authenc(hmac(sha384),rfc3686(ctr(aes)))",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "authenc(hmac(sha512),cbc(aes))",
.fips_allowed = 1,
.test = alg_test_aead,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha512_aes_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha512),cbc(des))",
.test = alg_test_aead,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha512_des_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha512),cbc(des3_ede))",
.test = alg_test_aead,
.fips_allowed = 1,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(hmac_sha512_des3_ede_cbc_tv_temp)
}
}, {
.alg = "authenc(hmac(sha512),ctr(aes))",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "authenc(hmac(sha512),rfc3686(ctr(aes)))",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "blake2b-160",
.test = alg_test_hash,
.fips_allowed = 0,
.suite = {
.hash = __VECS(blake2b_160_tv_template)
}
}, {
.alg = "blake2b-256",
.test = alg_test_hash,
.fips_allowed = 0,
.suite = {
.hash = __VECS(blake2b_256_tv_template)
}
}, {
.alg = "blake2b-384",
.test = alg_test_hash,
.fips_allowed = 0,
.suite = {
.hash = __VECS(blake2b_384_tv_template)
}
}, {
.alg = "blake2b-512",
.test = alg_test_hash,
.fips_allowed = 0,
.suite = {
.hash = __VECS(blake2b_512_tv_template)
}
}, {
.alg = "blake2s-128",
.test = alg_test_hash,
.suite = {
.hash = __VECS(blakes2s_128_tv_template)
}
}, {
.alg = "blake2s-160",
.test = alg_test_hash,
.suite = {
.hash = __VECS(blakes2s_160_tv_template)
}
}, {
.alg = "blake2s-224",
.test = alg_test_hash,
.suite = {
.hash = __VECS(blakes2s_224_tv_template)
}
}, {
.alg = "blake2s-256",
.test = alg_test_hash,
.suite = {
.hash = __VECS(blakes2s_256_tv_template)
}
}, {
.alg = "cbc(aes)",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(aes_cbc_tv_template)
},
}, {
.alg = "cbc(anubis)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(anubis_cbc_tv_template)
},
}, {
.alg = "cbc(blowfish)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(bf_cbc_tv_template)
},
}, {
.alg = "cbc(camellia)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(camellia_cbc_tv_template)
},
}, {
.alg = "cbc(cast5)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(cast5_cbc_tv_template)
},
}, {
.alg = "cbc(cast6)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(cast6_cbc_tv_template)
},
}, {
.alg = "cbc(des)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(des_cbc_tv_template)
},
}, {
.alg = "cbc(des3_ede)",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(des3_ede_cbc_tv_template)
},
}, {
/* Same as cbc(aes) except the key is stored in
* hardware secure memory which we reference by index
*/
.alg = "cbc(paes)",
.test = alg_test_null,
.fips_allowed = 1,
}, {
/* Same as cbc(sm4) except the key is stored in
* hardware secure memory which we reference by index
*/
.alg = "cbc(psm4)",
.test = alg_test_null,
}, {
.alg = "cbc(serpent)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(serpent_cbc_tv_template)
},
}, {
.alg = "cbc(sm4)",
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(sm4_cbc_tv_template)
}
}, {
.alg = "cbc(twofish)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(tf_cbc_tv_template)
},
}, {
#if IS_ENABLED(CONFIG_CRYPTO_PAES_S390)
.alg = "cbc-paes-s390",
.fips_allowed = 1,
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(aes_cbc_tv_template)
}
}, {
#endif
.alg = "cbcmac(aes)",
.fips_allowed = 1,
.test = alg_test_hash,
.suite = {
.hash = __VECS(aes_cbcmac_tv_template)
}
}, {
.alg = "ccm(aes)",
.generic_driver = "ccm_base(ctr(aes-generic),cbcmac(aes-generic))",
.test = alg_test_aead,
.fips_allowed = 1,
.suite = {
.aead = {
____VECS(aes_ccm_tv_template),
.einval_allowed = 1,
}
}
}, {
.alg = "cfb(aes)",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
.cipher = __VECS(aes_cfb_tv_template)
},
}, {
.alg = "cfb(sm4)",
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(sm4_cfb_tv_template)
}
}, {
.alg = "chacha20",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(chacha20_tv_template)
},
}, {
.alg = "cmac(aes)",
.fips_allowed = 1,
.test = alg_test_hash,
.suite = {
.hash = __VECS(aes_cmac128_tv_template)
}
}, {
.alg = "cmac(des3_ede)",
.fips_allowed = 1,
.test = alg_test_hash,
.suite = {
.hash = __VECS(des3_ede_cmac64_tv_template)
}
}, {
.alg = "compress_null",
.test = alg_test_null,
}, {
.alg = "crc32",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(crc32_tv_template)
}
}, {
.alg = "crc32c",
.test = alg_test_crc32c,
.fips_allowed = 1,
.suite = {
.hash = __VECS(crc32c_tv_template)
}
}, {
.alg = "crct10dif",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(crct10dif_tv_template)
}
}, {
.alg = "ctr(aes)",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(aes_ctr_tv_template)
}
}, {
.alg = "ctr(blowfish)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(bf_ctr_tv_template)
}
}, {
.alg = "ctr(camellia)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(camellia_ctr_tv_template)
}
}, {
.alg = "ctr(cast5)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(cast5_ctr_tv_template)
}
}, {
.alg = "ctr(cast6)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(cast6_ctr_tv_template)
}
}, {
.alg = "ctr(des)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(des_ctr_tv_template)
}
}, {
.alg = "ctr(des3_ede)",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(des3_ede_ctr_tv_template)
}
}, {
/* Same as ctr(aes) except the key is stored in
* hardware secure memory which we reference by index
*/
.alg = "ctr(paes)",
.test = alg_test_null,
.fips_allowed = 1,
}, {
/* Same as ctr(sm4) except the key is stored in
* hardware secure memory which we reference by index
*/
.alg = "ctr(psm4)",
.test = alg_test_null,
}, {
.alg = "ctr(serpent)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(serpent_ctr_tv_template)
}
}, {
.alg = "ctr(sm4)",
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(sm4_ctr_tv_template)
}
}, {
.alg = "ctr(twofish)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(tf_ctr_tv_template)
}
}, {
#if IS_ENABLED(CONFIG_CRYPTO_PAES_S390)
.alg = "ctr-paes-s390",
.fips_allowed = 1,
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(aes_ctr_tv_template)
}
}, {
#endif
.alg = "cts(cbc(aes))",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(cts_mode_tv_template)
}
}, {
/* Same as cts(cbc((aes)) except the key is stored in
* hardware secure memory which we reference by index
*/
.alg = "cts(cbc(paes))",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "curve25519",
.test = alg_test_kpp,
.suite = {
.kpp = __VECS(curve25519_tv_template)
}
}, {
.alg = "deflate",
.test = alg_test_comp,
.fips_allowed = 1,
.suite = {
.comp = {
.comp = __VECS(deflate_comp_tv_template),
.decomp = __VECS(deflate_decomp_tv_template)
}
}
}, {
.alg = "dh",
.test = alg_test_kpp,
.fips_allowed = 1,
.suite = {
.kpp = __VECS(dh_tv_template)
}
}, {
.alg = "digest_null",
.test = alg_test_null,
}, {
.alg = "drbg_nopr_ctr_aes128",
.test = alg_test_drbg,
.fips_allowed = 1,
.suite = {
.drbg = __VECS(drbg_nopr_ctr_aes128_tv_template)
}
}, {
.alg = "drbg_nopr_ctr_aes192",
.test = alg_test_drbg,
.fips_allowed = 1,
.suite = {
.drbg = __VECS(drbg_nopr_ctr_aes192_tv_template)
}
}, {
.alg = "drbg_nopr_ctr_aes256",
.test = alg_test_drbg,
.fips_allowed = 1,
.suite = {
.drbg = __VECS(drbg_nopr_ctr_aes256_tv_template)
}
}, {
/*
* There is no need to specifically test the DRBG with every
* backend cipher -- covered by drbg_nopr_hmac_sha256 test
*/
.alg = "drbg_nopr_hmac_sha1",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "drbg_nopr_hmac_sha256",
.test = alg_test_drbg,
.fips_allowed = 1,
.suite = {
.drbg = __VECS(drbg_nopr_hmac_sha256_tv_template)
}
}, {
/* covered by drbg_nopr_hmac_sha256 test */
.alg = "drbg_nopr_hmac_sha384",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "drbg_nopr_hmac_sha512",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "drbg_nopr_sha1",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "drbg_nopr_sha256",
.test = alg_test_drbg,
.fips_allowed = 1,
.suite = {
.drbg = __VECS(drbg_nopr_sha256_tv_template)
}
}, {
/* covered by drbg_nopr_sha256 test */
.alg = "drbg_nopr_sha384",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "drbg_nopr_sha512",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "drbg_pr_ctr_aes128",
.test = alg_test_drbg,
.fips_allowed = 1,
.suite = {
.drbg = __VECS(drbg_pr_ctr_aes128_tv_template)
}
}, {
/* covered by drbg_pr_ctr_aes128 test */
.alg = "drbg_pr_ctr_aes192",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "drbg_pr_ctr_aes256",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "drbg_pr_hmac_sha1",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "drbg_pr_hmac_sha256",
.test = alg_test_drbg,
.fips_allowed = 1,
.suite = {
.drbg = __VECS(drbg_pr_hmac_sha256_tv_template)
}
}, {
/* covered by drbg_pr_hmac_sha256 test */
.alg = "drbg_pr_hmac_sha384",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "drbg_pr_hmac_sha512",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "drbg_pr_sha1",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "drbg_pr_sha256",
.test = alg_test_drbg,
.fips_allowed = 1,
.suite = {
.drbg = __VECS(drbg_pr_sha256_tv_template)
}
}, {
/* covered by drbg_pr_sha256 test */
.alg = "drbg_pr_sha384",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "drbg_pr_sha512",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "ecb(aes)",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(aes_tv_template)
}
}, {
.alg = "ecb(anubis)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(anubis_tv_template)
}
}, {
.alg = "ecb(arc4)",
.generic_driver = "ecb(arc4)-generic",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(arc4_tv_template)
}
}, {
.alg = "ecb(blowfish)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(bf_tv_template)
}
}, {
.alg = "ecb(camellia)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(camellia_tv_template)
}
}, {
.alg = "ecb(cast5)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(cast5_tv_template)
}
}, {
.alg = "ecb(cast6)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(cast6_tv_template)
}
}, {
.alg = "ecb(cipher_null)",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "ecb(des)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(des_tv_template)
}
}, {
.alg = "ecb(des3_ede)",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(des3_ede_tv_template)
}
}, {
.alg = "ecb(fcrypt)",
.test = alg_test_skcipher,
.suite = {
.cipher = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.vecs = fcrypt_pcbc_tv_template,
.count = 1
}
}
}, {
.alg = "ecb(khazad)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(khazad_tv_template)
}
}, {
/* Same as ecb(aes) except the key is stored in
* hardware secure memory which we reference by index
*/
.alg = "ecb(paes)",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "ecb(seed)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(seed_tv_template)
}
}, {
.alg = "ecb(serpent)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(serpent_tv_template)
}
}, {
.alg = "ecb(sm4)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(sm4_tv_template)
}
}, {
.alg = "ecb(tea)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(tea_tv_template)
}
}, {
.alg = "ecb(tnepres)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(tnepres_tv_template)
}
}, {
.alg = "ecb(twofish)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(tf_tv_template)
}
}, {
.alg = "ecb(xeta)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(xeta_tv_template)
}
}, {
.alg = "ecb(xtea)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(xtea_tv_template)
}
}, {
#if IS_ENABLED(CONFIG_CRYPTO_PAES_S390)
.alg = "ecb-paes-s390",
.fips_allowed = 1,
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(aes_tv_template)
}
}, {
#endif
.alg = "ecdh",
.test = alg_test_kpp,
.fips_allowed = 1,
.suite = {
.kpp = __VECS(ecdh_tv_template)
}
}, {
.alg = "ecrdsa",
.test = alg_test_akcipher,
.suite = {
.akcipher = __VECS(ecrdsa_tv_template)
}
}, {
.alg = "essiv(authenc(hmac(sha256),cbc(aes)),sha256)",
.test = alg_test_aead,
.fips_allowed = 1,
.suite = {
.aead = __VECS(essiv_hmac_sha256_aes_cbc_tv_temp)
}
}, {
.alg = "essiv(cbc(aes),sha256)",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
.cipher = __VECS(essiv_aes_cbc_tv_template)
}
}, {
.alg = "gcm(aes)",
.generic_driver = "gcm_base(ctr(aes-generic),ghash-generic)",
.test = alg_test_aead,
.fips_allowed = 1,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(aes_gcm_tv_template)
}
}, {
.alg = "ghash",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(ghash_tv_template)
}
}, {
.alg = "hmac(md5)",
.test = alg_test_hash,
.suite = {
.hash = __VECS(hmac_md5_tv_template)
}
}, {
.alg = "hmac(rmd128)",
.test = alg_test_hash,
.suite = {
.hash = __VECS(hmac_rmd128_tv_template)
}
}, {
.alg = "hmac(rmd160)",
.test = alg_test_hash,
.suite = {
.hash = __VECS(hmac_rmd160_tv_template)
}
}, {
.alg = "hmac(sha1)",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(hmac_sha1_tv_template)
}
}, {
.alg = "hmac(sha224)",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(hmac_sha224_tv_template)
}
}, {
.alg = "hmac(sha256)",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(hmac_sha256_tv_template)
}
}, {
.alg = "hmac(sha3-224)",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(hmac_sha3_224_tv_template)
}
}, {
.alg = "hmac(sha3-256)",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(hmac_sha3_256_tv_template)
}
}, {
.alg = "hmac(sha3-384)",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(hmac_sha3_384_tv_template)
}
}, {
.alg = "hmac(sha3-512)",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(hmac_sha3_512_tv_template)
}
}, {
.alg = "hmac(sha384)",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(hmac_sha384_tv_template)
}
}, {
.alg = "hmac(sha512)",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(hmac_sha512_tv_template)
}
}, {
.alg = "hmac(sm3)",
.test = alg_test_hash,
.suite = {
.hash = __VECS(hmac_sm3_tv_template)
}
}, {
.alg = "hmac(streebog256)",
.test = alg_test_hash,
.suite = {
.hash = __VECS(hmac_streebog256_tv_template)
}
}, {
.alg = "hmac(streebog512)",
.test = alg_test_hash,
.suite = {
.hash = __VECS(hmac_streebog512_tv_template)
}
}, {
.alg = "jitterentropy_rng",
.fips_allowed = 1,
.test = alg_test_null,
}, {
.alg = "kw(aes)",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(aes_kw_tv_template)
}
}, {
.alg = "lrw(aes)",
.generic_driver = "lrw(ecb(aes-generic))",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(aes_lrw_tv_template)
}
}, {
.alg = "lrw(camellia)",
.generic_driver = "lrw(ecb(camellia-generic))",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(camellia_lrw_tv_template)
}
}, {
.alg = "lrw(cast6)",
.generic_driver = "lrw(ecb(cast6-generic))",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(cast6_lrw_tv_template)
}
}, {
.alg = "lrw(serpent)",
.generic_driver = "lrw(ecb(serpent-generic))",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(serpent_lrw_tv_template)
}
}, {
.alg = "lrw(twofish)",
.generic_driver = "lrw(ecb(twofish-generic))",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(tf_lrw_tv_template)
}
}, {
.alg = "lz4",
.test = alg_test_comp,
.fips_allowed = 1,
.suite = {
.comp = {
.comp = __VECS(lz4_comp_tv_template),
.decomp = __VECS(lz4_decomp_tv_template)
}
}
}, {
.alg = "lz4hc",
.test = alg_test_comp,
.fips_allowed = 1,
.suite = {
.comp = {
.comp = __VECS(lz4hc_comp_tv_template),
.decomp = __VECS(lz4hc_decomp_tv_template)
}
}
}, {
.alg = "lzo",
.test = alg_test_comp,
.fips_allowed = 1,
.suite = {
.comp = {
.comp = __VECS(lzo_comp_tv_template),
.decomp = __VECS(lzo_decomp_tv_template)
}
}
}, {
.alg = "lzo-rle",
.test = alg_test_comp,
.fips_allowed = 1,
.suite = {
.comp = {
.comp = __VECS(lzorle_comp_tv_template),
.decomp = __VECS(lzorle_decomp_tv_template)
}
}
}, {
.alg = "md4",
.test = alg_test_hash,
.suite = {
.hash = __VECS(md4_tv_template)
}
}, {
.alg = "md5",
.test = alg_test_hash,
.suite = {
.hash = __VECS(md5_tv_template)
}
}, {
.alg = "michael_mic",
.test = alg_test_hash,
.suite = {
.hash = __VECS(michael_mic_tv_template)
}
}, {
.alg = "nhpoly1305",
.test = alg_test_hash,
.suite = {
.hash = __VECS(nhpoly1305_tv_template)
}
}, {
.alg = "ofb(aes)",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(aes_ofb_tv_template)
}
}, {
/* Same as ofb(aes) except the key is stored in
* hardware secure memory which we reference by index
*/
.alg = "ofb(paes)",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "ofb(sm4)",
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(sm4_ofb_tv_template)
}
}, {
.alg = "pcbc(fcrypt)",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(fcrypt_pcbc_tv_template)
}
}, {
.alg = "pkcs1pad(rsa,sha224)",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "pkcs1pad(rsa,sha256)",
.test = alg_test_akcipher,
.fips_allowed = 1,
.suite = {
.akcipher = __VECS(pkcs1pad_rsa_tv_template)
}
}, {
.alg = "pkcs1pad(rsa,sha384)",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "pkcs1pad(rsa,sha512)",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "poly1305",
.test = alg_test_hash,
.suite = {
.hash = __VECS(poly1305_tv_template)
}
}, {
.alg = "rfc3686(ctr(aes))",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(aes_ctr_rfc3686_tv_template)
}
}, {
.alg = "rfc3686(ctr(sm4))",
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(sm4_ctr_rfc3686_tv_template)
}
}, {
.alg = "rfc4106(gcm(aes))",
.generic_driver = "rfc4106(gcm_base(ctr(aes-generic),ghash-generic))",
.test = alg_test_aead,
.fips_allowed = 1,
.suite = {
.aead = {
____VECS(aes_gcm_rfc4106_tv_template),
.einval_allowed = 1,
.aad_iv = 1,
}
}
}, {
.alg = "rfc4309(ccm(aes))",
.generic_driver = "rfc4309(ccm_base(ctr(aes-generic),cbcmac(aes-generic)))",
.test = alg_test_aead,
.fips_allowed = 1,
.suite = {
.aead = {
____VECS(aes_ccm_rfc4309_tv_template),
.einval_allowed = 1,
.aad_iv = 1,
}
}
}, {
.alg = "rfc4543(gcm(aes))",
.generic_driver = "rfc4543(gcm_base(ctr(aes-generic),ghash-generic))",
.test = alg_test_aead,
.suite = {
.aead = {
____VECS(aes_gcm_rfc4543_tv_template),
.einval_allowed = 1,
.aad_iv = 1,
}
}
}, {
.alg = "rfc7539(chacha20,poly1305)",
.test = alg_test_aead,
.suite = {
crypto: testmgr - unify the AEAD encryption and decryption test vectors Currently testmgr has separate encryption and decryption test vectors for AEADs. That's massively redundant, since usually the decryption tests are identical to the encryption tests, just with the input/result swapped. And for some algorithms it was forgotten to add decryption test vectors, so for them currently only encryption is being tested. Therefore, eliminate the redundancy by removing the AEAD decryption test vectors and updating testmgr to test both AEAD encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen' (plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length) instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here refers to the full ciphertext, including the authentication tag. For now the scatterlist divisions are just given for the plaintext length, not also the ciphertext length. For decryption, the last scatterlist element is just extended by the authentication tag length. In total, this removes over 5000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. The testmgr.h portion of this patch was automatically generated using the following awk script, except that I also manually updated the definition of 'struct aead_testvec' and fixed the location of the comment describing the AEGIS-128 test vectors. BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct aead_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC { sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.ilen[[:space:]]*=/, ".plen\t=") sub(/\.rlen[[:space:]]*=/, ".clen\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-14 02:32:28 +03:00
.aead = __VECS(rfc7539_tv_template)
}
}, {
.alg = "rfc7539esp(chacha20,poly1305)",
.test = alg_test_aead,
.suite = {
.aead = {
____VECS(rfc7539esp_tv_template),
.einval_allowed = 1,
.aad_iv = 1,
}
}
}, {
.alg = "rmd128",
.test = alg_test_hash,
.suite = {
.hash = __VECS(rmd128_tv_template)
}
}, {
.alg = "rmd160",
.test = alg_test_hash,
.suite = {
.hash = __VECS(rmd160_tv_template)
}
}, {
.alg = "rmd256",
.test = alg_test_hash,
.suite = {
.hash = __VECS(rmd256_tv_template)
}
}, {
.alg = "rmd320",
.test = alg_test_hash,
.suite = {
.hash = __VECS(rmd320_tv_template)
}
}, {
.alg = "rsa",
.test = alg_test_akcipher,
.fips_allowed = 1,
.suite = {
.akcipher = __VECS(rsa_tv_template)
}
}, {
.alg = "salsa20",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(salsa20_stream_tv_template)
}
}, {
.alg = "sha1",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(sha1_tv_template)
}
}, {
.alg = "sha224",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(sha224_tv_template)
}
}, {
.alg = "sha256",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(sha256_tv_template)
}
}, {
.alg = "sha3-224",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(sha3_224_tv_template)
}
}, {
.alg = "sha3-256",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(sha3_256_tv_template)
}
}, {
.alg = "sha3-384",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(sha3_384_tv_template)
}
}, {
.alg = "sha3-512",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(sha3_512_tv_template)
}
}, {
.alg = "sha384",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(sha384_tv_template)
}
}, {
.alg = "sha512",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(sha512_tv_template)
}
}, {
.alg = "sm3",
.test = alg_test_hash,
.suite = {
.hash = __VECS(sm3_tv_template)
}
}, {
.alg = "streebog256",
.test = alg_test_hash,
.suite = {
.hash = __VECS(streebog256_tv_template)
}
}, {
.alg = "streebog512",
.test = alg_test_hash,
.suite = {
.hash = __VECS(streebog512_tv_template)
}
}, {
.alg = "tgr128",
.test = alg_test_hash,
.suite = {
.hash = __VECS(tgr128_tv_template)
}
}, {
.alg = "tgr160",
.test = alg_test_hash,
.suite = {
.hash = __VECS(tgr160_tv_template)
}
}, {
.alg = "tgr192",
.test = alg_test_hash,
.suite = {
.hash = __VECS(tgr192_tv_template)
}
}, {
.alg = "vmac64(aes)",
.test = alg_test_hash,
.suite = {
.hash = __VECS(vmac64_aes_tv_template)
}
}, {
.alg = "wp256",
.test = alg_test_hash,
.suite = {
.hash = __VECS(wp256_tv_template)
}
}, {
.alg = "wp384",
.test = alg_test_hash,
.suite = {
.hash = __VECS(wp384_tv_template)
}
}, {
.alg = "wp512",
.test = alg_test_hash,
.suite = {
.hash = __VECS(wp512_tv_template)
}
}, {
.alg = "xcbc(aes)",
.test = alg_test_hash,
.suite = {
.hash = __VECS(aes_xcbc128_tv_template)
}
crypto: chacha - add XChaCha12 support Now that the generic implementation of ChaCha20 has been refactored to allow varying the number of rounds, add support for XChaCha12, which is the XSalsa construction applied to ChaCha12. ChaCha12 is one of the three ciphers specified by the original ChaCha paper (https://cr.yp.to/chacha/chacha-20080128.pdf: "ChaCha, a variant of Salsa20"), alongside ChaCha8 and ChaCha20. ChaCha12 is faster than ChaCha20 but has a lower, but still large, security margin. We need XChaCha12 support so that it can be used in the Adiantum encryption mode, which enables disk/file encryption on low-end mobile devices where AES-XTS is too slow as the CPUs lack AES instructions. We'd prefer XChaCha20 (the more popular variant), but it's too slow on some of our target devices, so at least in some cases we do need the XChaCha12-based version. In more detail, the problem is that Adiantum is still much slower than we're happy with, and encryption still has a quite noticeable effect on the feel of low-end devices. Users and vendors push back hard against encryption that degrades the user experience, which always risks encryption being disabled entirely. So we need to choose the fastest option that gives us a solid margin of security, and here that's XChaCha12. The best known attack on ChaCha breaks only 7 rounds and has 2^235 time complexity, so ChaCha12's security margin is still better than AES-256's. Much has been learned about cryptanalysis of ARX ciphers since Salsa20 was originally designed in 2005, and it now seems we can be comfortable with a smaller number of rounds. The eSTREAM project also suggests the 12-round version of Salsa20 as providing the best balance among the different variants: combining very good performance with a "comfortable margin of security". Note that it would be trivial to add vanilla ChaCha12 in addition to XChaCha12. However, it's unneeded for now and therefore is omitted. As discussed in the patch that introduced XChaCha20 support, I considered splitting the code into separate chacha-common, chacha20, xchacha20, and xchacha12 modules, so that these algorithms could be enabled/disabled independently. However, since nearly all the code is shared anyway, I ultimately decided there would have been little benefit to the added complexity. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-17 04:26:22 +03:00
}, {
.alg = "xchacha12",
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(xchacha12_tv_template)
},
crypto: chacha20-generic - add XChaCha20 support Add support for the XChaCha20 stream cipher. XChaCha20 is the application of the XSalsa20 construction (https://cr.yp.to/snuffle/xsalsa-20081128.pdf) to ChaCha20 rather than to Salsa20. XChaCha20 extends ChaCha20's nonce length from 64 bits (or 96 bits, depending on convention) to 192 bits, while provably retaining ChaCha20's security. XChaCha20 uses the ChaCha20 permutation to map the key and first 128 nonce bits to a 256-bit subkey. Then, it does the ChaCha20 stream cipher with the subkey and remaining 64 bits of nonce. We need XChaCha support in order to add support for the Adiantum encryption mode. Note that to meet our performance requirements, we actually plan to primarily use the variant XChaCha12. But we believe it's wise to first add XChaCha20 as a baseline with a higher security margin, in case there are any situations where it can be used. Supporting both variants is straightforward. Since XChaCha20's subkey differs for each request, XChaCha20 can't be a template that wraps ChaCha20; that would require re-keying the underlying ChaCha20 for every request, which wouldn't be thread-safe. Instead, we make XChaCha20 its own top-level algorithm which calls the ChaCha20 streaming implementation internally. Similar to the existing ChaCha20 implementation, we define the IV to be the nonce and stream position concatenated together. This allows users to seek to any position in the stream. I considered splitting the code into separate chacha20-common, chacha20, and xchacha20 modules, so that chacha20 and xchacha20 could be enabled/disabled independently. However, since nearly all the code is shared anyway, I ultimately decided there would have been little benefit to the added complexity of separate modules. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-17 04:26:20 +03:00
}, {
.alg = "xchacha20",
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(xchacha20_tv_template)
},
}, {
.alg = "xts(aes)",
.generic_driver = "xts(ecb(aes-generic))",
.test = alg_test_skcipher,
.fips_allowed = 1,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(aes_xts_tv_template)
}
}, {
.alg = "xts(camellia)",
.generic_driver = "xts(ecb(camellia-generic))",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(camellia_xts_tv_template)
}
}, {
.alg = "xts(cast6)",
.generic_driver = "xts(ecb(cast6-generic))",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(cast6_xts_tv_template)
}
}, {
/* Same as xts(aes) except the key is stored in
* hardware secure memory which we reference by index
*/
.alg = "xts(paes)",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "xts(serpent)",
.generic_driver = "xts(ecb(serpent-generic))",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(serpent_xts_tv_template)
}
}, {
.alg = "xts(twofish)",
.generic_driver = "xts(ecb(twofish-generic))",
.test = alg_test_skcipher,
.suite = {
crypto: testmgr - eliminate redundant decryption test vectors Currently testmgr has separate encryption and decryption test vectors for symmetric ciphers. That's massively redundant, since with few exceptions (mostly mistakes, apparently), all decryption tests are identical to the encryption tests, just with the input/result flipped. Therefore, eliminate the redundancy by removing the decryption test vectors and updating testmgr to test both encryption and decryption using what used to be the encryption test vectors. Naming is adjusted accordingly: each cipher_testvec now has a 'ptext' (plaintext), 'ctext' (ciphertext), and 'len' instead of an 'input', 'result', 'ilen', and 'rlen'. Note that it was always the case that 'ilen == rlen'. AES keywrap ("kw(aes)") is special because its IV is generated by the encryption. Previously this was handled by specifying 'iv_out' for encryption and 'iv' for decryption. To make it work cleanly with only one set of test vectors, put the IV in 'iv', remove 'iv_out', and add a boolean that indicates that the IV is generated by the encryption. In total, this removes over 10000 lines from testmgr.h, with no reduction in test coverage since prior patches already copied the few unique decryption test vectors into the encryption test vectors. This covers all algorithms that used 'struct cipher_testvec', e.g. any block cipher in the ECB, CBC, CTR, XTS, LRW, CTS-CBC, PCBC, OFB, or keywrap modes, and Salsa20 and ChaCha20. No change is made to AEAD tests, though we probably can eliminate a similar redundancy there too. The testmgr.h portion of this patch was automatically generated using the following awk script, with some slight manual fixups on top (updated 'struct cipher_testvec' definition, updated a few comments, and fixed up the AES keywrap test vectors): BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER } /^static const struct cipher_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC } /^static const struct cipher_testvec.*_dec_/ { mode = DECVEC } mode == ENCVEC && !/\.ilen[[:space:]]*=/ { sub(/\.input[[:space:]]*=$/, ".ptext =") sub(/\.input[[:space:]]*=/, ".ptext\t=") sub(/\.result[[:space:]]*=$/, ".ctext =") sub(/\.result[[:space:]]*=/, ".ctext\t=") sub(/\.rlen[[:space:]]*=/, ".len\t=") print } mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER } mode == OTHER { print } mode == ENCVEC && /^};/ { mode = OTHER } mode == DECVEC && /^};/ { mode = DECVEC_TAIL } Note that git's default diff algorithm gets confused by the testmgr.h portion of this patch, and reports too many lines added and removed. It's better viewed with 'git diff --minimal' (or 'git show --minimal'), which reports "2 files changed, 919 insertions(+), 11723 deletions(-)". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-21 08:50:29 +03:00
.cipher = __VECS(tf_xts_tv_template)
}
}, {
#if IS_ENABLED(CONFIG_CRYPTO_PAES_S390)
.alg = "xts-paes-s390",
.fips_allowed = 1,
.test = alg_test_skcipher,
.suite = {
.cipher = __VECS(aes_xts_tv_template)
}
}, {
#endif
.alg = "xts4096(paes)",
.test = alg_test_null,
.fips_allowed = 1,
}, {
.alg = "xts512(paes)",
.test = alg_test_null,
.fips_allowed = 1,
crypto: xxhash - Implement xxhash support xxhash is currently implemented as a self-contained module in /lib. This patch enables that module to be used as part of the generic kernel crypto framework. It adds a simple wrapper to the 64bit version. I've also added test vectors (with help from Nick Terrell). The upstream xxhash code is tested by running hashing operation on random 222 byte data with seed values of 0 and a prime number. The upstream test suite can be found at https://github.com/Cyan4973/xxHash/blob/cf46e0c/xxhsum.c#L664 Essentially hashing is run on data of length 0,1,14,222 with the aforementioned seed values 0 and prime 2654435761. The particular random 222 byte string was provided to me by Nick Terrell by reading /dev/random and the checksums were calculated by the upstream xxsum utility with the following bash script: dd if=/dev/random of=TEST_VECTOR bs=1 count=222 for a in 0 1; do for l in 0 1 14 222; do for s in 0 2654435761; do echo algo $a length $l seed $s; head -c $l TEST_VECTOR | ~/projects/kernel/xxHash/xxhsum -H$a -s$s done done done This produces output as follows: algo 0 length 0 seed 0 02cc5d05 stdin algo 0 length 0 seed 2654435761 02cc5d05 stdin algo 0 length 1 seed 0 25201171 stdin algo 0 length 1 seed 2654435761 25201171 stdin algo 0 length 14 seed 0 c1d95975 stdin algo 0 length 14 seed 2654435761 c1d95975 stdin algo 0 length 222 seed 0 b38662a6 stdin algo 0 length 222 seed 2654435761 b38662a6 stdin algo 1 length 0 seed 0 ef46db3751d8e999 stdin algo 1 length 0 seed 2654435761 ac75fda2929b17ef stdin algo 1 length 1 seed 0 27c3f04c2881203a stdin algo 1 length 1 seed 2654435761 4a15ed26415dfe4d stdin algo 1 length 14 seed 0 3d33dc700231dfad stdin algo 1 length 14 seed 2654435761 ea5f7ddef9a64f80 stdin algo 1 length 222 seed 0 5f3d3c08ec2bef34 stdin algo 1 length 222 seed 2654435761 6a9df59664c7ed62 stdin algo 1 is xx64 variant, algo 0 is the 32 bit variant which is currently not hooked up. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-30 09:52:57 +03:00
}, {
.alg = "xxhash64",
.test = alg_test_hash,
.fips_allowed = 1,
.suite = {
.hash = __VECS(xxhash64_tv_template)
}
}, {
.alg = "zlib-deflate",
.test = alg_test_comp,
.fips_allowed = 1,
.suite = {
.comp = {
.comp = __VECS(zlib_deflate_comp_tv_template),
.decomp = __VECS(zlib_deflate_decomp_tv_template)
}
}
}, {
.alg = "zstd",
.test = alg_test_comp,
.fips_allowed = 1,
.suite = {
.comp = {
.comp = __VECS(zstd_comp_tv_template),
.decomp = __VECS(zstd_decomp_tv_template)
}
}
}
};
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
static void alg_check_test_descs_order(void)
{
int i;
for (i = 1; i < ARRAY_SIZE(alg_test_descs); i++) {
int diff = strcmp(alg_test_descs[i - 1].alg,
alg_test_descs[i].alg);
if (WARN_ON(diff > 0)) {
pr_warn("testmgr: alg_test_descs entries in wrong order: '%s' before '%s'\n",
alg_test_descs[i - 1].alg,
alg_test_descs[i].alg);
}
if (WARN_ON(diff == 0)) {
pr_warn("testmgr: duplicate alg_test_descs entry: '%s'\n",
alg_test_descs[i].alg);
}
}
}
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
static void alg_check_testvec_configs(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(default_cipher_testvec_configs); i++)
WARN_ON(!valid_testvec_config(
&default_cipher_testvec_configs[i]));
for (i = 0; i < ARRAY_SIZE(default_hash_testvec_configs); i++)
WARN_ON(!valid_testvec_config(
&default_hash_testvec_configs[i]));
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
}
static void testmgr_onetime_init(void)
{
alg_check_test_descs_order();
alg_check_testvec_configs();
#ifdef CONFIG_CRYPTO_MANAGER_EXTRA_TESTS
pr_warn("alg: extra crypto tests enabled. This is intended for developer use only.\n");
#endif
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
}
static int alg_find_test(const char *alg)
{
int start = 0;
int end = ARRAY_SIZE(alg_test_descs);
while (start < end) {
int i = (start + end) / 2;
int diff = strcmp(alg_test_descs[i].alg, alg);
if (diff > 0) {
end = i;
continue;
}
if (diff < 0) {
start = i + 1;
continue;
}
return i;
}
return -1;
}
int alg_test(const char *driver, const char *alg, u32 type, u32 mask)
{
int i;
int j;
int rc;
if (!fips_enabled && notests) {
printk_once(KERN_INFO "alg: self-tests disabled\n");
return 0;
}
crypto: testmgr - add testvec_config struct and helper functions Crypto algorithms must produce the same output for the same input regardless of data layout, i.e. how the src and dst scatterlists are divided into chunks and how each chunk is aligned. Request flags such as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either. However, testing of this currently has many gaps. For example, individual algorithms are responsible for providing their own chunked test vectors. But many don't bother to do this or test only one or two cases, providing poor test coverage. Also, other things such as misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all. Test code is also duplicated between the chunked and non-chunked cases, making it difficult to make other improvements. To improve the situation, this patch series basically moves the chunk descriptions into the testmgr itself so that they are shared by all algorithms. However, it's done in an extensible way via a new struct 'testvec_config', which describes not just the scaled chunk lengths but also all other aspects of the crypto operation besides the data itself such as the buffer alignments, the request flags, whether the operation is in-place or not, the IV alignment, and for hash algorithms when to do each update() and when to use finup() vs. final() vs. digest(). Then, this patch series makes skcipher, aead, and hash algorithms be tested against a list of default testvec_configs, replacing the current test code. This improves overall test coverage, without reducing test performance too much. Note that the test vectors themselves are not changed, except for removing the chunk lists. This series also adds randomized fuzz tests, enabled by a new kconfig option intended for developer use only, where skcipher, aead, and hash algorithms are tested against many randomly generated testvec_configs. This provides much more comprehensive test coverage. These improved tests have already exposed many bugs. To start it off, this initial patch adds the testvec_config and various helper functions that will be used by the skcipher, aead, and hash test code that will be converted to use the new testvec_config framework. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01 10:51:43 +03:00
DO_ONCE(testmgr_onetime_init);
if ((type & CRYPTO_ALG_TYPE_MASK) == CRYPTO_ALG_TYPE_CIPHER) {
char nalg[CRYPTO_MAX_ALG_NAME];
if (snprintf(nalg, sizeof(nalg), "ecb(%s)", alg) >=
sizeof(nalg))
return -ENAMETOOLONG;
i = alg_find_test(nalg);
if (i < 0)
goto notest;
if (fips_enabled && !alg_test_descs[i].fips_allowed)
goto non_fips_alg;
rc = alg_test_cipher(alg_test_descs + i, driver, type, mask);
goto test_done;
}
i = alg_find_test(alg);
j = alg_find_test(driver);
if (i < 0 && j < 0)
goto notest;
if (fips_enabled && ((i >= 0 && !alg_test_descs[i].fips_allowed) ||
(j >= 0 && !alg_test_descs[j].fips_allowed)))
goto non_fips_alg;
rc = 0;
if (i >= 0)
rc |= alg_test_descs[i].test(alg_test_descs + i, driver,
type, mask);
if (j >= 0 && j != i)
rc |= alg_test_descs[j].test(alg_test_descs + j, driver,
type, mask);
test_done:
if (rc && (fips_enabled || panic_on_fail)) {
fips_fail_notify();
panic("alg: self-tests for %s (%s) failed in %s mode!\n",
driver, alg, fips_enabled ? "fips" : "panic_on_fail");
}
if (fips_enabled && !rc)
pr_info("alg: self-tests for %s (%s) passed\n", driver, alg);
return rc;
notest:
printk(KERN_INFO "alg: No test for %s (%s)\n", alg, driver);
return 0;
non_fips_alg:
return -EINVAL;
}
#endif /* CONFIG_CRYPTO_MANAGER_DISABLE_TESTS */
EXPORT_SYMBOL_GPL(alg_test);