linux/fs/f2fs/super.c

5038 lines
131 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* fs/f2fs/super.c
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/fs_context.h>
mm: introduce memalloc_retry_wait() Various places in the kernel - largely in filesystems - respond to a memory allocation failure by looping around and re-trying. Some of these cannot conveniently use __GFP_NOFAIL, for reasons such as: - a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on - a need to check for the process being signalled between failures - the possibility that other recovery actions could be performed - the allocation is quite deep in support code, and passing down an extra flag to say if __GFP_NOFAIL is wanted would be clumsy. Many of these currently use congestion_wait() which (in almost all cases) simply waits the given timeout - congestion isn't tracked for most devices. It isn't clear what the best delay is for loops, but it is clear that the various filesystems shouldn't be responsible for choosing a timeout. This patch introduces memalloc_retry_wait() with takes on that responsibility. Code that wants to retry a memory allocation can call this function passing the GFP flags that were used. It will wait however is appropriate. For now, it only considers __GFP_NORETRY and whatever gfpflags_allow_blocking() tests. If blocking is allowed without __GFP_NORETRY, then alloc_page either made some reclaim progress, or waited for a while, before failing. So there is no need for much further waiting. memalloc_retry_wait() will wait until the current jiffie ends. If this condition is not met, then alloc_page() won't have waited much if at all. In that case memalloc_retry_wait() waits about 200ms. This is the delay that most current loops uses. linux/sched/mm.h needs to be included in some files now, but linux/backing-dev.h does not. Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 01:07:14 +03:00
#include <linux/sched/mm.h>
#include <linux/statfs.h>
#include <linux/buffer_head.h>
#include <linux/kthread.h>
#include <linux/parser.h>
#include <linux/mount.h>
#include <linux/seq_file.h>
#include <linux/proc_fs.h>
#include <linux/random.h>
#include <linux/exportfs.h>
#include <linux/blkdev.h>
#include <linux/quotaops.h>
#include <linux/f2fs_fs.h>
#include <linux/sysfs.h>
#include <linux/quota.h>
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
#include <linux/unicode.h>
#include <linux/part_stat.h>
#include <linux/zstd.h>
#include <linux/lz4.h>
#include "f2fs.h"
#include "node.h"
#include "segment.h"
#include "xattr.h"
#include "gc.h"
#include "iostat.h"
#define CREATE_TRACE_POINTS
#include <trace/events/f2fs.h>
static struct kmem_cache *f2fs_inode_cachep;
#ifdef CONFIG_F2FS_FAULT_INJECTION
const char *f2fs_fault_name[FAULT_MAX] = {
[FAULT_KMALLOC] = "kmalloc",
[FAULT_KVMALLOC] = "kvmalloc",
[FAULT_PAGE_ALLOC] = "page alloc",
[FAULT_PAGE_GET] = "page get",
[FAULT_ALLOC_NID] = "alloc nid",
[FAULT_ORPHAN] = "orphan",
[FAULT_BLOCK] = "no more block",
[FAULT_DIR_DEPTH] = "too big dir depth",
[FAULT_EVICT_INODE] = "evict_inode fail",
[FAULT_TRUNCATE] = "truncate fail",
[FAULT_READ_IO] = "read IO error",
[FAULT_CHECKPOINT] = "checkpoint error",
[FAULT_DISCARD] = "discard error",
[FAULT_WRITE_IO] = "write IO error",
[FAULT_SLAB_ALLOC] = "slab alloc",
[FAULT_DQUOT_INIT] = "dquot initialize",
[FAULT_LOCK_OP] = "lock_op",
[FAULT_BLKADDR] = "invalid blkaddr",
};
void f2fs_build_fault_attr(struct f2fs_sb_info *sbi, unsigned int rate,
unsigned int type)
{
struct f2fs_fault_info *ffi = &F2FS_OPTION(sbi).fault_info;
if (rate) {
atomic_set(&ffi->inject_ops, 0);
ffi->inject_rate = rate;
}
if (type)
ffi->inject_type = type;
if (!rate && !type)
memset(ffi, 0, sizeof(struct f2fs_fault_info));
}
#endif
/* f2fs-wide shrinker description */
static struct shrinker f2fs_shrinker_info = {
.scan_objects = f2fs_shrink_scan,
.count_objects = f2fs_shrink_count,
.seeks = DEFAULT_SEEKS,
};
enum {
Opt_gc_background,
Opt_disable_roll_forward,
Opt_norecovery,
Opt_discard,
Opt_nodiscard,
Opt_noheap,
Opt_heap,
Opt_user_xattr,
Opt_nouser_xattr,
Opt_acl,
Opt_noacl,
Opt_active_logs,
Opt_disable_ext_identify,
Opt_inline_xattr,
Opt_noinline_xattr,
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
Opt_inline_xattr_size,
Opt_inline_data,
Opt_inline_dentry,
Opt_noinline_dentry,
Opt_flush_merge,
Opt_noflush_merge,
Opt_barrier,
Opt_nobarrier,
Opt_fastboot,
Opt_extent_cache,
Opt_noextent_cache,
Opt_noinline_data,
Opt_data_flush,
Opt_reserve_root,
Opt_resgid,
Opt_resuid,
Opt_mode,
Opt_io_size_bits,
Opt_fault_injection,
Opt_fault_type,
Opt_lazytime,
Opt_nolazytime,
Opt_quota,
Opt_noquota,
Opt_usrquota,
Opt_grpquota,
Opt_prjquota,
Opt_usrjquota,
Opt_grpjquota,
Opt_prjjquota,
Opt_offusrjquota,
Opt_offgrpjquota,
Opt_offprjjquota,
Opt_jqfmt_vfsold,
Opt_jqfmt_vfsv0,
Opt_jqfmt_vfsv1,
Opt_alloc,
Opt_fsync,
Opt_test_dummy_encryption,
Opt_inlinecrypt,
Opt_checkpoint_disable,
Opt_checkpoint_disable_cap,
Opt_checkpoint_disable_cap_perc,
Opt_checkpoint_enable,
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 03:00:42 +03:00
Opt_checkpoint_merge,
Opt_nocheckpoint_merge,
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
Opt_compress_algorithm,
Opt_compress_log_size,
Opt_compress_extension,
Opt_nocompress_extension,
Opt_compress_chksum,
Opt_compress_mode,
Opt_compress_cache,
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 16:14:49 +03:00
Opt_atgc,
Opt_gc_merge,
Opt_nogc_merge,
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 03:15:43 +03:00
Opt_discard_unit,
Opt_memory_mode,
f2fs: add block_age-based extent cache This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-02 04:37:15 +03:00
Opt_age_extent_cache,
Opt_errors,
Opt_err,
};
static match_table_t f2fs_tokens = {
{Opt_gc_background, "background_gc=%s"},
{Opt_disable_roll_forward, "disable_roll_forward"},
{Opt_norecovery, "norecovery"},
{Opt_discard, "discard"},
{Opt_nodiscard, "nodiscard"},
{Opt_noheap, "no_heap"},
{Opt_heap, "heap"},
{Opt_user_xattr, "user_xattr"},
{Opt_nouser_xattr, "nouser_xattr"},
{Opt_acl, "acl"},
{Opt_noacl, "noacl"},
{Opt_active_logs, "active_logs=%u"},
{Opt_disable_ext_identify, "disable_ext_identify"},
{Opt_inline_xattr, "inline_xattr"},
{Opt_noinline_xattr, "noinline_xattr"},
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
{Opt_inline_xattr_size, "inline_xattr_size=%u"},
{Opt_inline_data, "inline_data"},
{Opt_inline_dentry, "inline_dentry"},
{Opt_noinline_dentry, "noinline_dentry"},
{Opt_flush_merge, "flush_merge"},
{Opt_noflush_merge, "noflush_merge"},
{Opt_barrier, "barrier"},
{Opt_nobarrier, "nobarrier"},
{Opt_fastboot, "fastboot"},
{Opt_extent_cache, "extent_cache"},
{Opt_noextent_cache, "noextent_cache"},
{Opt_noinline_data, "noinline_data"},
{Opt_data_flush, "data_flush"},
{Opt_reserve_root, "reserve_root=%u"},
{Opt_resgid, "resgid=%u"},
{Opt_resuid, "resuid=%u"},
{Opt_mode, "mode=%s"},
{Opt_io_size_bits, "io_bits=%u"},
{Opt_fault_injection, "fault_injection=%u"},
{Opt_fault_type, "fault_type=%u"},
{Opt_lazytime, "lazytime"},
{Opt_nolazytime, "nolazytime"},
{Opt_quota, "quota"},
{Opt_noquota, "noquota"},
{Opt_usrquota, "usrquota"},
{Opt_grpquota, "grpquota"},
{Opt_prjquota, "prjquota"},
{Opt_usrjquota, "usrjquota=%s"},
{Opt_grpjquota, "grpjquota=%s"},
{Opt_prjjquota, "prjjquota=%s"},
{Opt_offusrjquota, "usrjquota="},
{Opt_offgrpjquota, "grpjquota="},
{Opt_offprjjquota, "prjjquota="},
{Opt_jqfmt_vfsold, "jqfmt=vfsold"},
{Opt_jqfmt_vfsv0, "jqfmt=vfsv0"},
{Opt_jqfmt_vfsv1, "jqfmt=vfsv1"},
{Opt_alloc, "alloc_mode=%s"},
{Opt_fsync, "fsync_mode=%s"},
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-13 02:32:50 +03:00
{Opt_test_dummy_encryption, "test_dummy_encryption=%s"},
{Opt_test_dummy_encryption, "test_dummy_encryption"},
{Opt_inlinecrypt, "inlinecrypt"},
{Opt_checkpoint_disable, "checkpoint=disable"},
{Opt_checkpoint_disable_cap, "checkpoint=disable:%u"},
{Opt_checkpoint_disable_cap_perc, "checkpoint=disable:%u%%"},
{Opt_checkpoint_enable, "checkpoint=enable"},
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 03:00:42 +03:00
{Opt_checkpoint_merge, "checkpoint_merge"},
{Opt_nocheckpoint_merge, "nocheckpoint_merge"},
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
{Opt_compress_algorithm, "compress_algorithm=%s"},
{Opt_compress_log_size, "compress_log_size=%u"},
{Opt_compress_extension, "compress_extension=%s"},
{Opt_nocompress_extension, "nocompress_extension=%s"},
{Opt_compress_chksum, "compress_chksum"},
{Opt_compress_mode, "compress_mode=%s"},
{Opt_compress_cache, "compress_cache"},
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 16:14:49 +03:00
{Opt_atgc, "atgc"},
{Opt_gc_merge, "gc_merge"},
{Opt_nogc_merge, "nogc_merge"},
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 03:15:43 +03:00
{Opt_discard_unit, "discard_unit=%s"},
{Opt_memory_mode, "memory=%s"},
f2fs: add block_age-based extent cache This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-02 04:37:15 +03:00
{Opt_age_extent_cache, "age_extent_cache"},
{Opt_errors, "errors=%s"},
{Opt_err, NULL},
};
void f2fs_printk(struct f2fs_sb_info *sbi, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
int level;
va_start(args, fmt);
level = printk_get_level(fmt);
vaf.fmt = printk_skip_level(fmt);
vaf.va = &args;
printk("%c%cF2FS-fs (%s): %pV\n",
KERN_SOH_ASCII, level, sbi->sb->s_id, &vaf);
va_end(args);
}
#if IS_ENABLED(CONFIG_UNICODE)
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
static const struct f2fs_sb_encodings {
__u16 magic;
char *name;
unsigned int version;
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
} f2fs_sb_encoding_map[] = {
{F2FS_ENC_UTF8_12_1, "utf8", UNICODE_AGE(12, 1, 0)},
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
};
static const struct f2fs_sb_encodings *
f2fs_sb_read_encoding(const struct f2fs_super_block *sb)
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
{
__u16 magic = le16_to_cpu(sb->s_encoding);
int i;
for (i = 0; i < ARRAY_SIZE(f2fs_sb_encoding_map); i++)
if (magic == f2fs_sb_encoding_map[i].magic)
return &f2fs_sb_encoding_map[i];
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
return NULL;
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
}
struct kmem_cache *f2fs_cf_name_slab;
static int __init f2fs_create_casefold_cache(void)
{
f2fs_cf_name_slab = f2fs_kmem_cache_create("f2fs_casefolded_name",
F2FS_NAME_LEN);
return f2fs_cf_name_slab ? 0 : -ENOMEM;
}
static void f2fs_destroy_casefold_cache(void)
{
kmem_cache_destroy(f2fs_cf_name_slab);
}
#else
static int __init f2fs_create_casefold_cache(void) { return 0; }
static void f2fs_destroy_casefold_cache(void) { }
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
#endif
static inline void limit_reserve_root(struct f2fs_sb_info *sbi)
{
block_t limit = min((sbi->user_block_count >> 3),
sbi->user_block_count - sbi->reserved_blocks);
/* limit is 12.5% */
if (test_opt(sbi, RESERVE_ROOT) &&
F2FS_OPTION(sbi).root_reserved_blocks > limit) {
F2FS_OPTION(sbi).root_reserved_blocks = limit;
f2fs_info(sbi, "Reduce reserved blocks for root = %u",
F2FS_OPTION(sbi).root_reserved_blocks);
}
if (!test_opt(sbi, RESERVE_ROOT) &&
(!uid_eq(F2FS_OPTION(sbi).s_resuid,
make_kuid(&init_user_ns, F2FS_DEF_RESUID)) ||
!gid_eq(F2FS_OPTION(sbi).s_resgid,
make_kgid(&init_user_ns, F2FS_DEF_RESGID))))
f2fs_info(sbi, "Ignore s_resuid=%u, s_resgid=%u w/o reserve_root",
from_kuid_munged(&init_user_ns,
F2FS_OPTION(sbi).s_resuid),
from_kgid_munged(&init_user_ns,
F2FS_OPTION(sbi).s_resgid));
}
f2fs: fix to reserve space for IO align feature https://bugzilla.kernel.org/show_bug.cgi?id=204137 With below script, we will hit panic during new segment allocation: DISK=bingo.img MOUNT_DIR=/mnt/f2fs dd if=/dev/zero of=$DISK bs=1M count=105 mkfs.f2fe -a 1 -o 19 -t 1 -z 1 -f -q $DISK mount -t f2fs $DISK $MOUNT_DIR -o "noinline_dentry,flush_merge,noextent_cache,mode=lfs,io_bits=7,fsync_mode=strict" for (( i = 0; i < 4096; i++ )); do name=`head /dev/urandom | tr -dc A-Za-z0-9 | head -c 10` mkdir $MOUNT_DIR/$name done umount $MOUNT_DIR rm $DISK --- Core dump --- Call Trace: allocate_segment_by_default+0x9d/0x100 [f2fs] f2fs_allocate_data_block+0x3c0/0x5c0 [f2fs] do_write_page+0x62/0x110 [f2fs] f2fs_outplace_write_data+0x43/0xc0 [f2fs] f2fs_do_write_data_page+0x386/0x560 [f2fs] __write_data_page+0x706/0x850 [f2fs] f2fs_write_cache_pages+0x267/0x6a0 [f2fs] f2fs_write_data_pages+0x19c/0x2e0 [f2fs] do_writepages+0x1c/0x70 __filemap_fdatawrite_range+0xaa/0xe0 filemap_fdatawrite+0x1f/0x30 f2fs_sync_dirty_inodes+0x74/0x1f0 [f2fs] block_operations+0xdc/0x350 [f2fs] f2fs_write_checkpoint+0x104/0x1150 [f2fs] f2fs_sync_fs+0xa2/0x120 [f2fs] f2fs_balance_fs_bg+0x33c/0x390 [f2fs] f2fs_write_node_pages+0x4c/0x1f0 [f2fs] do_writepages+0x1c/0x70 __writeback_single_inode+0x45/0x320 writeback_sb_inodes+0x273/0x5c0 wb_writeback+0xff/0x2e0 wb_workfn+0xa1/0x370 process_one_work+0x138/0x350 worker_thread+0x4d/0x3d0 kthread+0x109/0x140 ret_from_fork+0x25/0x30 The root cause here is, with IO alignment feature enables, in worst case, we need F2FS_IO_SIZE() free blocks space for single one 4k write due to IO alignment feature will fill dummy pages to make IO being aligned. So we will easily run out of free segments during non-inline directory's data writeback, even in process of foreground GC. In order to fix this issue, I just propose to reserve additional free space for IO alignment feature to handle worst case of free space usage ratio during FGGC. Fixes: 0a595ebaaa6b ("f2fs: support IO alignment for DATA and NODE writes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-12-11 16:27:36 +03:00
static inline int adjust_reserved_segment(struct f2fs_sb_info *sbi)
{
unsigned int sec_blks = sbi->blocks_per_seg * sbi->segs_per_sec;
unsigned int avg_vblocks;
unsigned int wanted_reserved_segments;
block_t avail_user_block_count;
if (!F2FS_IO_ALIGNED(sbi))
return 0;
/* average valid block count in section in worst case */
avg_vblocks = sec_blks / F2FS_IO_SIZE(sbi);
/*
* we need enough free space when migrating one section in worst case
*/
wanted_reserved_segments = (F2FS_IO_SIZE(sbi) / avg_vblocks) *
reserved_segments(sbi);
wanted_reserved_segments -= reserved_segments(sbi);
avail_user_block_count = sbi->user_block_count -
sbi->current_reserved_blocks -
F2FS_OPTION(sbi).root_reserved_blocks;
if (wanted_reserved_segments * sbi->blocks_per_seg >
avail_user_block_count) {
f2fs_err(sbi, "IO align feature can't grab additional reserved segment: %u, available segments: %u",
wanted_reserved_segments,
avail_user_block_count >> sbi->log_blocks_per_seg);
return -ENOSPC;
}
SM_I(sbi)->additional_reserved_segments = wanted_reserved_segments;
f2fs_info(sbi, "IO align feature needs additional reserved segment: %u",
wanted_reserved_segments);
return 0;
}
static inline void adjust_unusable_cap_perc(struct f2fs_sb_info *sbi)
{
if (!F2FS_OPTION(sbi).unusable_cap_perc)
return;
if (F2FS_OPTION(sbi).unusable_cap_perc == 100)
F2FS_OPTION(sbi).unusable_cap = sbi->user_block_count;
else
F2FS_OPTION(sbi).unusable_cap = (sbi->user_block_count / 100) *
F2FS_OPTION(sbi).unusable_cap_perc;
f2fs_info(sbi, "Adjust unusable cap for checkpoint=disable = %u / %u%%",
F2FS_OPTION(sbi).unusable_cap,
F2FS_OPTION(sbi).unusable_cap_perc);
}
static void init_once(void *foo)
{
struct f2fs_inode_info *fi = (struct f2fs_inode_info *) foo;
inode_init_once(&fi->vfs_inode);
}
#ifdef CONFIG_QUOTA
static const char * const quotatypes[] = INITQFNAMES;
#define QTYPE2NAME(t) (quotatypes[t])
static int f2fs_set_qf_name(struct super_block *sb, int qtype,
substring_t *args)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
char *qname;
int ret = -EINVAL;
if (sb_any_quota_loaded(sb) && !F2FS_OPTION(sbi).s_qf_names[qtype]) {
f2fs_err(sbi, "Cannot change journaled quota options when quota turned on");
return -EINVAL;
}
if (f2fs_sb_has_quota_ino(sbi)) {
f2fs_info(sbi, "QUOTA feature is enabled, so ignore qf_name");
return 0;
}
qname = match_strdup(args);
if (!qname) {
f2fs_err(sbi, "Not enough memory for storing quotafile name");
return -ENOMEM;
}
if (F2FS_OPTION(sbi).s_qf_names[qtype]) {
if (strcmp(F2FS_OPTION(sbi).s_qf_names[qtype], qname) == 0)
ret = 0;
else
f2fs_err(sbi, "%s quota file already specified",
QTYPE2NAME(qtype));
goto errout;
}
if (strchr(qname, '/')) {
f2fs_err(sbi, "quotafile must be on filesystem root");
goto errout;
}
F2FS_OPTION(sbi).s_qf_names[qtype] = qname;
set_opt(sbi, QUOTA);
return 0;
errout:
kfree(qname);
return ret;
}
static int f2fs_clear_qf_name(struct super_block *sb, int qtype)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
if (sb_any_quota_loaded(sb) && F2FS_OPTION(sbi).s_qf_names[qtype]) {
f2fs_err(sbi, "Cannot change journaled quota options when quota turned on");
return -EINVAL;
}
kfree(F2FS_OPTION(sbi).s_qf_names[qtype]);
F2FS_OPTION(sbi).s_qf_names[qtype] = NULL;
return 0;
}
static int f2fs_check_quota_options(struct f2fs_sb_info *sbi)
{
/*
* We do the test below only for project quotas. 'usrquota' and
* 'grpquota' mount options are allowed even without quota feature
* to support legacy quotas in quota files.
*/
if (test_opt(sbi, PRJQUOTA) && !f2fs_sb_has_project_quota(sbi)) {
f2fs_err(sbi, "Project quota feature not enabled. Cannot enable project quota enforcement.");
return -1;
}
if (F2FS_OPTION(sbi).s_qf_names[USRQUOTA] ||
F2FS_OPTION(sbi).s_qf_names[GRPQUOTA] ||
F2FS_OPTION(sbi).s_qf_names[PRJQUOTA]) {
if (test_opt(sbi, USRQUOTA) &&
F2FS_OPTION(sbi).s_qf_names[USRQUOTA])
clear_opt(sbi, USRQUOTA);
if (test_opt(sbi, GRPQUOTA) &&
F2FS_OPTION(sbi).s_qf_names[GRPQUOTA])
clear_opt(sbi, GRPQUOTA);
if (test_opt(sbi, PRJQUOTA) &&
F2FS_OPTION(sbi).s_qf_names[PRJQUOTA])
clear_opt(sbi, PRJQUOTA);
if (test_opt(sbi, GRPQUOTA) || test_opt(sbi, USRQUOTA) ||
test_opt(sbi, PRJQUOTA)) {
f2fs_err(sbi, "old and new quota format mixing");
return -1;
}
if (!F2FS_OPTION(sbi).s_jquota_fmt) {
f2fs_err(sbi, "journaled quota format not specified");
return -1;
}
}
if (f2fs_sb_has_quota_ino(sbi) && F2FS_OPTION(sbi).s_jquota_fmt) {
f2fs_info(sbi, "QUOTA feature is enabled, so ignore jquota_fmt");
F2FS_OPTION(sbi).s_jquota_fmt = 0;
}
return 0;
}
#endif
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-13 02:32:50 +03:00
static int f2fs_set_test_dummy_encryption(struct super_block *sb,
const char *opt,
const substring_t *arg,
bool is_remount)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
struct fs_parameter param = {
.type = fs_value_is_string,
.string = arg->from ? arg->from : "",
};
struct fscrypt_dummy_policy *policy =
&F2FS_OPTION(sbi).dummy_enc_policy;
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-13 02:32:50 +03:00
int err;
if (!IS_ENABLED(CONFIG_FS_ENCRYPTION)) {
f2fs_warn(sbi, "test_dummy_encryption option not supported");
return -EINVAL;
}
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-13 02:32:50 +03:00
if (!f2fs_sb_has_encrypt(sbi)) {
f2fs_err(sbi, "Encrypt feature is off");
return -EINVAL;
}
/*
* This mount option is just for testing, and it's not worthwhile to
* implement the extra complexity (e.g. RCU protection) that would be
* needed to allow it to be set or changed during remount. We do allow
* it to be specified during remount, but only if there is no change.
*/
if (is_remount && !fscrypt_is_dummy_policy_set(policy)) {
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-13 02:32:50 +03:00
f2fs_warn(sbi, "Can't set test_dummy_encryption on remount");
return -EINVAL;
}
err = fscrypt_parse_test_dummy_encryption(&param, policy);
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-13 02:32:50 +03:00
if (err) {
if (err == -EEXIST)
f2fs_warn(sbi,
"Can't change test_dummy_encryption on remount");
else if (err == -EINVAL)
f2fs_warn(sbi, "Value of option \"%s\" is unrecognized",
opt);
else
f2fs_warn(sbi, "Error processing option \"%s\" [%d]",
opt, err);
return -EINVAL;
}
f2fs_warn(sbi, "Test dummy encryption mode enabled");
return 0;
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-13 02:32:50 +03:00
}
#ifdef CONFIG_F2FS_FS_COMPRESSION
/*
* 1. The same extension name cannot not appear in both compress and non-compress extension
* at the same time.
* 2. If the compress extension specifies all files, the types specified by the non-compress
* extension will be treated as special cases and will not be compressed.
* 3. Don't allow the non-compress extension specifies all files.
*/
static int f2fs_test_compress_extension(struct f2fs_sb_info *sbi)
{
unsigned char (*ext)[F2FS_EXTENSION_LEN];
unsigned char (*noext)[F2FS_EXTENSION_LEN];
int ext_cnt, noext_cnt, index = 0, no_index = 0;
ext = F2FS_OPTION(sbi).extensions;
ext_cnt = F2FS_OPTION(sbi).compress_ext_cnt;
noext = F2FS_OPTION(sbi).noextensions;
noext_cnt = F2FS_OPTION(sbi).nocompress_ext_cnt;
if (!noext_cnt)
return 0;
for (no_index = 0; no_index < noext_cnt; no_index++) {
if (!strcasecmp("*", noext[no_index])) {
f2fs_info(sbi, "Don't allow the nocompress extension specifies all files");
return -EINVAL;
}
for (index = 0; index < ext_cnt; index++) {
if (!strcasecmp(ext[index], noext[no_index])) {
f2fs_info(sbi, "Don't allow the same extension %s appear in both compress and nocompress extension",
ext[index]);
return -EINVAL;
}
}
}
return 0;
}
#ifdef CONFIG_F2FS_FS_LZ4
static int f2fs_set_lz4hc_level(struct f2fs_sb_info *sbi, const char *str)
{
#ifdef CONFIG_F2FS_FS_LZ4HC
unsigned int level;
if (strlen(str) == 3) {
F2FS_OPTION(sbi).compress_level = LZ4HC_DEFAULT_CLEVEL;
return 0;
}
str += 3;
if (str[0] != ':') {
f2fs_info(sbi, "wrong format, e.g. <alg_name>:<compr_level>");
return -EINVAL;
}
if (kstrtouint(str + 1, 10, &level))
return -EINVAL;
if (level < LZ4HC_MIN_CLEVEL || level > LZ4HC_MAX_CLEVEL) {
f2fs_info(sbi, "invalid lz4hc compress level: %d", level);
return -EINVAL;
}
F2FS_OPTION(sbi).compress_level = level;
return 0;
#else
if (strlen(str) == 3) {
F2FS_OPTION(sbi).compress_level = 0;
return 0;
}
f2fs_info(sbi, "kernel doesn't support lz4hc compression");
return -EINVAL;
#endif
}
#endif
#ifdef CONFIG_F2FS_FS_ZSTD
static int f2fs_set_zstd_level(struct f2fs_sb_info *sbi, const char *str)
{
unsigned int level;
int len = 4;
if (strlen(str) == len) {
F2FS_OPTION(sbi).compress_level = F2FS_ZSTD_DEFAULT_CLEVEL;
return 0;
}
str += len;
if (str[0] != ':') {
f2fs_info(sbi, "wrong format, e.g. <alg_name>:<compr_level>");
return -EINVAL;
}
if (kstrtouint(str + 1, 10, &level))
return -EINVAL;
if (level < zstd_min_clevel() || level > zstd_max_clevel()) {
f2fs_info(sbi, "invalid zstd compress level: %d", level);
return -EINVAL;
}
F2FS_OPTION(sbi).compress_level = level;
return 0;
}
#endif
#endif
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-13 02:32:50 +03:00
static int parse_options(struct super_block *sb, char *options, bool is_remount)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
substring_t args[MAX_OPT_ARGS];
#ifdef CONFIG_F2FS_FS_COMPRESSION
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
unsigned char (*ext)[F2FS_EXTENSION_LEN];
unsigned char (*noext)[F2FS_EXTENSION_LEN];
int ext_cnt, noext_cnt;
#endif
char *p, *name;
int arg = 0;
kuid_t uid;
kgid_t gid;
int ret;
if (!options)
goto default_check;
while ((p = strsep(&options, ",")) != NULL) {
int token;
if (!*p)
continue;
/*
* Initialize args struct so we know whether arg was
* found; some options take optional arguments.
*/
args[0].to = args[0].from = NULL;
token = match_token(p, f2fs_tokens, args);
switch (token) {
case Opt_gc_background:
name = match_strdup(&args[0]);
if (!name)
return -ENOMEM;
if (!strcmp(name, "on")) {
F2FS_OPTION(sbi).bggc_mode = BGGC_MODE_ON;
} else if (!strcmp(name, "off")) {
F2FS_OPTION(sbi).bggc_mode = BGGC_MODE_OFF;
} else if (!strcmp(name, "sync")) {
F2FS_OPTION(sbi).bggc_mode = BGGC_MODE_SYNC;
} else {
kfree(name);
return -EINVAL;
}
kfree(name);
break;
case Opt_disable_roll_forward:
set_opt(sbi, DISABLE_ROLL_FORWARD);
break;
case Opt_norecovery:
/* this option mounts f2fs with ro */
set_opt(sbi, NORECOVERY);
if (!f2fs_readonly(sb))
return -EINVAL;
break;
case Opt_discard:
if (!f2fs_hw_support_discard(sbi)) {
f2fs_warn(sbi, "device does not support discard");
break;
}
f2fs: fix to avoid NULL pointer dereference on se->discard_map https://bugzilla.kernel.org/show_bug.cgi?id=200951 These is a NULL pointer dereference issue reported in bugzilla: Hi, in the setup there is a SATA SSD connected to a SATA-to-USB bridge. The disc is "Samsung SSD 850 PRO 256G" which supports TRIM. There are four partitions: sda1: FAT /boot sda2: F2FS / sda3: F2FS /home sda4: F2FS The bridge is ASMT1153e which uses the "uas" driver. There is no TRIM pass-through, so, when mounting it reports: mounting with "discard" option, but the device does not support discard The USB host is USB3.0 and UASP capable. It is the one on RK3399. Given this everything works fine, except there is no TRIM support. In order to enable TRIM a new UDEV rule is added [1]: /etc/udev/rules.d/10-sata-bridge-trim.rules: ACTION=="add|change", ATTRS{idVendor}=="174c", ATTRS{idProduct}=="55aa", SUBSYSTEM=="scsi_disk", ATTR{provisioning_mode}="unmap" After reboot any F2FS write hangs forever and dmesg reports: Unable to handle kernel NULL pointer dereference Also tested on a x86_64 system: works fine even with TRIM enabled. same disc same bridge different usb host controller different cpu architecture not root filesystem Regards, Vicenç. [1] Post #5 in https://bbs.archlinux.org/viewtopic.php?id=236280 Unable to handle kernel NULL pointer dereference at virtual address 000000000000003e Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000626e3122 [000000000000003e] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Modules linked in: overlay snd_soc_hdmi_codec rc_cec dw_hdmi_i2s_audio dw_hdmi_cec snd_soc_simple_card snd_soc_simple_card_utils snd_soc_rockchip_i2s rockchip_rga snd_soc_rockchip_pcm rockchipdrm videobuf2_dma_sg v4l2_mem2mem rtc_rk808 videobuf2_memops analogix_dp videobuf2_v4l2 videobuf2_common dw_hdmi dw_wdt cec rc_core videodev drm_kms_helper media drm rockchip_thermal rockchip_saradc realtek drm_panel_orientation_quirks syscopyarea sysfillrect sysimgblt fb_sys_fops dwmac_rk stmmac_platform stmmac pwm_bl squashfs loop crypto_user gpio_keys hid_kensington CPU: 5 PID: 957 Comm: nvim Not tainted 4.19.0-rc1-1-ARCH #1 Hardware name: Sapphire-RK3399 Board (DT) pstate: 00000005 (nzcv daif -PAN -UAO) pc : update_sit_entry+0x304/0x4b0 lr : update_sit_entry+0x108/0x4b0 sp : ffff00000ca13bd0 x29: ffff00000ca13bd0 x28: 000000000000003e x27: 0000000000000020 x26: 0000000000080000 x25: 0000000000000048 x24: ffff8000ebb85cf8 x23: 0000000000000253 x22: 00000000ffffffff x21: 00000000000535f2 x20: 00000000ffffffdf x19: ffff8000eb9e6800 x18: ffff8000eb9e6be8 x17: 0000000007ce6926 x16: 000000001c83ffa8 x15: 0000000000000000 x14: ffff8000f602df90 x13: 0000000000000006 x12: 0000000000000040 x11: 0000000000000228 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 00000000000535f2 x6 : ffff8000ebff3440 x5 : ffff8000ebff3440 x4 : ffff8000ebe3a6c8 x3 : 00000000ffffffff x2 : 0000000000000020 x1 : 0000000000000000 x0 : ffff8000eb9e5800 Process nvim (pid: 957, stack limit = 0x0000000063a78320) Call trace: update_sit_entry+0x304/0x4b0 f2fs_invalidate_blocks+0x98/0x140 truncate_node+0x90/0x400 f2fs_remove_inode_page+0xe8/0x340 f2fs_evict_inode+0x2b0/0x408 evict+0xe0/0x1e0 iput+0x160/0x260 do_unlinkat+0x214/0x298 __arm64_sys_unlinkat+0x3c/0x68 el0_svc_handler+0x94/0x118 el0_svc+0x8/0xc Code: f9400800 b9488400 36080140 f9400f01 (387c4820) ---[ end trace a0f21a307118c477 ]--- The reason is it is possible to enable discard flag on block queue via UDEV, but during mount, f2fs will initialize se->discard_map only if this flag is set, once the flag is set after mount, f2fs may dereference NULL pointer on se->discard_map. So this patch does below changes to fix this issue: - initialize and update se->discard_map all the time. - don't clear DISCARD option if device has no QUEUE_FLAG_DISCARD flag during mount. - don't issue small discard on zoned block device. - introduce some functions to enhance the readability. Signed-off-by: Chao Yu <yuchao0@huawei.com> Tested-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-03 22:52:17 +03:00
set_opt(sbi, DISCARD);
break;
case Opt_nodiscard:
if (f2fs_hw_should_discard(sbi)) {
f2fs_warn(sbi, "discard is required for zoned block devices");
return -EINVAL;
}
clear_opt(sbi, DISCARD);
break;
case Opt_noheap:
set_opt(sbi, NOHEAP);
break;
case Opt_heap:
clear_opt(sbi, NOHEAP);
break;
#ifdef CONFIG_F2FS_FS_XATTR
case Opt_user_xattr:
set_opt(sbi, XATTR_USER);
break;
case Opt_nouser_xattr:
clear_opt(sbi, XATTR_USER);
break;
case Opt_inline_xattr:
set_opt(sbi, INLINE_XATTR);
break;
case Opt_noinline_xattr:
clear_opt(sbi, INLINE_XATTR);
break;
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
case Opt_inline_xattr_size:
if (args->from && match_int(args, &arg))
return -EINVAL;
set_opt(sbi, INLINE_XATTR_SIZE);
F2FS_OPTION(sbi).inline_xattr_size = arg;
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
break;
#else
case Opt_user_xattr:
f2fs_info(sbi, "user_xattr options not supported");
break;
case Opt_nouser_xattr:
f2fs_info(sbi, "nouser_xattr options not supported");
break;
case Opt_inline_xattr:
f2fs_info(sbi, "inline_xattr options not supported");
break;
case Opt_noinline_xattr:
f2fs_info(sbi, "noinline_xattr options not supported");
break;
#endif
#ifdef CONFIG_F2FS_FS_POSIX_ACL
case Opt_acl:
set_opt(sbi, POSIX_ACL);
break;
case Opt_noacl:
clear_opt(sbi, POSIX_ACL);
break;
#else
case Opt_acl:
f2fs_info(sbi, "acl options not supported");
break;
case Opt_noacl:
f2fs_info(sbi, "noacl options not supported");
break;
#endif
case Opt_active_logs:
if (args->from && match_int(args, &arg))
return -EINVAL;
if (arg != 2 && arg != 4 &&
arg != NR_CURSEG_PERSIST_TYPE)
return -EINVAL;
F2FS_OPTION(sbi).active_logs = arg;
break;
case Opt_disable_ext_identify:
set_opt(sbi, DISABLE_EXT_IDENTIFY);
break;
case Opt_inline_data:
set_opt(sbi, INLINE_DATA);
break;
case Opt_inline_dentry:
set_opt(sbi, INLINE_DENTRY);
break;
case Opt_noinline_dentry:
clear_opt(sbi, INLINE_DENTRY);
break;
case Opt_flush_merge:
set_opt(sbi, FLUSH_MERGE);
break;
case Opt_noflush_merge:
clear_opt(sbi, FLUSH_MERGE);
break;
case Opt_nobarrier:
set_opt(sbi, NOBARRIER);
break;
case Opt_barrier:
clear_opt(sbi, NOBARRIER);
break;
case Opt_fastboot:
set_opt(sbi, FASTBOOT);
break;
case Opt_extent_cache:
set_opt(sbi, READ_EXTENT_CACHE);
break;
case Opt_noextent_cache:
clear_opt(sbi, READ_EXTENT_CACHE);
break;
case Opt_noinline_data:
clear_opt(sbi, INLINE_DATA);
break;
case Opt_data_flush:
set_opt(sbi, DATA_FLUSH);
break;
case Opt_reserve_root:
if (args->from && match_int(args, &arg))
return -EINVAL;
if (test_opt(sbi, RESERVE_ROOT)) {
f2fs_info(sbi, "Preserve previous reserve_root=%u",
F2FS_OPTION(sbi).root_reserved_blocks);
} else {
F2FS_OPTION(sbi).root_reserved_blocks = arg;
set_opt(sbi, RESERVE_ROOT);
}
break;
case Opt_resuid:
if (args->from && match_int(args, &arg))
return -EINVAL;
uid = make_kuid(current_user_ns(), arg);
if (!uid_valid(uid)) {
f2fs_err(sbi, "Invalid uid value %d", arg);
return -EINVAL;
}
F2FS_OPTION(sbi).s_resuid = uid;
break;
case Opt_resgid:
if (args->from && match_int(args, &arg))
return -EINVAL;
gid = make_kgid(current_user_ns(), arg);
if (!gid_valid(gid)) {
f2fs_err(sbi, "Invalid gid value %d", arg);
return -EINVAL;
}
F2FS_OPTION(sbi).s_resgid = gid;
break;
case Opt_mode:
name = match_strdup(&args[0]);
if (!name)
return -ENOMEM;
if (!strcmp(name, "adaptive")) {
if (f2fs_sb_has_blkzoned(sbi)) {
f2fs_warn(sbi, "adaptive mode is not allowed with zoned block device feature");
kfree(name);
return -EINVAL;
}
F2FS_OPTION(sbi).fs_mode = FS_MODE_ADAPTIVE;
} else if (!strcmp(name, "lfs")) {
F2FS_OPTION(sbi).fs_mode = FS_MODE_LFS;
} else if (!strcmp(name, "fragment:segment")) {
F2FS_OPTION(sbi).fs_mode = FS_MODE_FRAGMENT_SEG;
} else if (!strcmp(name, "fragment:block")) {
F2FS_OPTION(sbi).fs_mode = FS_MODE_FRAGMENT_BLK;
} else {
kfree(name);
return -EINVAL;
}
kfree(name);
break;
case Opt_io_size_bits:
if (args->from && match_int(args, &arg))
return -EINVAL;
if (arg <= 0 || arg > __ilog2_u32(BIO_MAX_VECS)) {
f2fs_warn(sbi, "Not support %ld, larger than %d",
BIT(arg), BIO_MAX_VECS);
return -EINVAL;
}
F2FS_OPTION(sbi).write_io_size_bits = arg;
break;
#ifdef CONFIG_F2FS_FAULT_INJECTION
case Opt_fault_injection:
if (args->from && match_int(args, &arg))
return -EINVAL;
f2fs_build_fault_attr(sbi, arg, F2FS_ALL_FAULT_TYPE);
set_opt(sbi, FAULT_INJECTION);
break;
case Opt_fault_type:
if (args->from && match_int(args, &arg))
return -EINVAL;
f2fs_build_fault_attr(sbi, 0, arg);
set_opt(sbi, FAULT_INJECTION);
break;
#else
case Opt_fault_injection:
f2fs_info(sbi, "fault_injection options not supported");
break;
case Opt_fault_type:
f2fs_info(sbi, "fault_type options not supported");
break;
#endif
case Opt_lazytime:
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 00:05:09 +03:00
sb->s_flags |= SB_LAZYTIME;
break;
case Opt_nolazytime:
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 00:05:09 +03:00
sb->s_flags &= ~SB_LAZYTIME;
break;
#ifdef CONFIG_QUOTA
case Opt_quota:
case Opt_usrquota:
set_opt(sbi, USRQUOTA);
break;
case Opt_grpquota:
set_opt(sbi, GRPQUOTA);
break;
case Opt_prjquota:
set_opt(sbi, PRJQUOTA);
break;
case Opt_usrjquota:
ret = f2fs_set_qf_name(sb, USRQUOTA, &args[0]);
if (ret)
return ret;
break;
case Opt_grpjquota:
ret = f2fs_set_qf_name(sb, GRPQUOTA, &args[0]);
if (ret)
return ret;
break;
case Opt_prjjquota:
ret = f2fs_set_qf_name(sb, PRJQUOTA, &args[0]);
if (ret)
return ret;
break;
case Opt_offusrjquota:
ret = f2fs_clear_qf_name(sb, USRQUOTA);
if (ret)
return ret;
break;
case Opt_offgrpjquota:
ret = f2fs_clear_qf_name(sb, GRPQUOTA);
if (ret)
return ret;
break;
case Opt_offprjjquota:
ret = f2fs_clear_qf_name(sb, PRJQUOTA);
if (ret)
return ret;
break;
case Opt_jqfmt_vfsold:
F2FS_OPTION(sbi).s_jquota_fmt = QFMT_VFS_OLD;
break;
case Opt_jqfmt_vfsv0:
F2FS_OPTION(sbi).s_jquota_fmt = QFMT_VFS_V0;
break;
case Opt_jqfmt_vfsv1:
F2FS_OPTION(sbi).s_jquota_fmt = QFMT_VFS_V1;
break;
case Opt_noquota:
clear_opt(sbi, QUOTA);
clear_opt(sbi, USRQUOTA);
clear_opt(sbi, GRPQUOTA);
clear_opt(sbi, PRJQUOTA);
break;
#else
case Opt_quota:
case Opt_usrquota:
case Opt_grpquota:
case Opt_prjquota:
case Opt_usrjquota:
case Opt_grpjquota:
case Opt_prjjquota:
case Opt_offusrjquota:
case Opt_offgrpjquota:
case Opt_offprjjquota:
case Opt_jqfmt_vfsold:
case Opt_jqfmt_vfsv0:
case Opt_jqfmt_vfsv1:
case Opt_noquota:
f2fs_info(sbi, "quota operations not supported");
break;
#endif
case Opt_alloc:
name = match_strdup(&args[0]);
if (!name)
return -ENOMEM;
if (!strcmp(name, "default")) {
F2FS_OPTION(sbi).alloc_mode = ALLOC_MODE_DEFAULT;
} else if (!strcmp(name, "reuse")) {
F2FS_OPTION(sbi).alloc_mode = ALLOC_MODE_REUSE;
} else {
kfree(name);
return -EINVAL;
}
kfree(name);
break;
case Opt_fsync:
name = match_strdup(&args[0]);
if (!name)
return -ENOMEM;
if (!strcmp(name, "posix")) {
F2FS_OPTION(sbi).fsync_mode = FSYNC_MODE_POSIX;
} else if (!strcmp(name, "strict")) {
F2FS_OPTION(sbi).fsync_mode = FSYNC_MODE_STRICT;
} else if (!strcmp(name, "nobarrier")) {
F2FS_OPTION(sbi).fsync_mode =
FSYNC_MODE_NOBARRIER;
} else {
kfree(name);
return -EINVAL;
}
kfree(name);
break;
case Opt_test_dummy_encryption:
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-13 02:32:50 +03:00
ret = f2fs_set_test_dummy_encryption(sb, p, &args[0],
is_remount);
if (ret)
return ret;
break;
case Opt_inlinecrypt:
#ifdef CONFIG_FS_ENCRYPTION_INLINE_CRYPT
sb->s_flags |= SB_INLINECRYPT;
#else
f2fs_info(sbi, "inline encryption not supported");
#endif
break;
case Opt_checkpoint_disable_cap_perc:
if (args->from && match_int(args, &arg))
return -EINVAL;
if (arg < 0 || arg > 100)
return -EINVAL;
F2FS_OPTION(sbi).unusable_cap_perc = arg;
set_opt(sbi, DISABLE_CHECKPOINT);
break;
case Opt_checkpoint_disable_cap:
if (args->from && match_int(args, &arg))
return -EINVAL;
F2FS_OPTION(sbi).unusable_cap = arg;
set_opt(sbi, DISABLE_CHECKPOINT);
break;
case Opt_checkpoint_disable:
set_opt(sbi, DISABLE_CHECKPOINT);
break;
case Opt_checkpoint_enable:
clear_opt(sbi, DISABLE_CHECKPOINT);
break;
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 03:00:42 +03:00
case Opt_checkpoint_merge:
set_opt(sbi, MERGE_CHECKPOINT);
break;
case Opt_nocheckpoint_merge:
clear_opt(sbi, MERGE_CHECKPOINT);
break;
#ifdef CONFIG_F2FS_FS_COMPRESSION
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
case Opt_compress_algorithm:
if (!f2fs_sb_has_compression(sbi)) {
f2fs_info(sbi, "Image doesn't support compression");
break;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
}
name = match_strdup(&args[0]);
if (!name)
return -ENOMEM;
if (!strcmp(name, "lzo")) {
#ifdef CONFIG_F2FS_FS_LZO
F2FS_OPTION(sbi).compress_level = 0;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
F2FS_OPTION(sbi).compress_algorithm =
COMPRESS_LZO;
#else
f2fs_info(sbi, "kernel doesn't support lzo compression");
#endif
} else if (!strncmp(name, "lz4", 3)) {
#ifdef CONFIG_F2FS_FS_LZ4
ret = f2fs_set_lz4hc_level(sbi, name);
if (ret) {
kfree(name);
return -EINVAL;
}
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
F2FS_OPTION(sbi).compress_algorithm =
COMPRESS_LZ4;
#else
f2fs_info(sbi, "kernel doesn't support lz4 compression");
#endif
} else if (!strncmp(name, "zstd", 4)) {
#ifdef CONFIG_F2FS_FS_ZSTD
ret = f2fs_set_zstd_level(sbi, name);
if (ret) {
kfree(name);
return -EINVAL;
}
F2FS_OPTION(sbi).compress_algorithm =
COMPRESS_ZSTD;
#else
f2fs_info(sbi, "kernel doesn't support zstd compression");
#endif
} else if (!strcmp(name, "lzo-rle")) {
#ifdef CONFIG_F2FS_FS_LZORLE
F2FS_OPTION(sbi).compress_level = 0;
F2FS_OPTION(sbi).compress_algorithm =
COMPRESS_LZORLE;
#else
f2fs_info(sbi, "kernel doesn't support lzorle compression");
#endif
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
} else {
kfree(name);
return -EINVAL;
}
kfree(name);
break;
case Opt_compress_log_size:
if (!f2fs_sb_has_compression(sbi)) {
f2fs_info(sbi, "Image doesn't support compression");
break;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
}
if (args->from && match_int(args, &arg))
return -EINVAL;
if (arg < MIN_COMPRESS_LOG_SIZE ||
arg > MAX_COMPRESS_LOG_SIZE) {
f2fs_err(sbi,
"Compress cluster log size is out of range");
return -EINVAL;
}
F2FS_OPTION(sbi).compress_log_size = arg;
break;
case Opt_compress_extension:
if (!f2fs_sb_has_compression(sbi)) {
f2fs_info(sbi, "Image doesn't support compression");
break;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
}
name = match_strdup(&args[0]);
if (!name)
return -ENOMEM;
ext = F2FS_OPTION(sbi).extensions;
ext_cnt = F2FS_OPTION(sbi).compress_ext_cnt;
if (strlen(name) >= F2FS_EXTENSION_LEN ||
ext_cnt >= COMPRESS_EXT_NUM) {
f2fs_err(sbi,
"invalid extension length/number");
kfree(name);
return -EINVAL;
}
strcpy(ext[ext_cnt], name);
F2FS_OPTION(sbi).compress_ext_cnt++;
kfree(name);
break;
case Opt_nocompress_extension:
if (!f2fs_sb_has_compression(sbi)) {
f2fs_info(sbi, "Image doesn't support compression");
break;
}
name = match_strdup(&args[0]);
if (!name)
return -ENOMEM;
noext = F2FS_OPTION(sbi).noextensions;
noext_cnt = F2FS_OPTION(sbi).nocompress_ext_cnt;
if (strlen(name) >= F2FS_EXTENSION_LEN ||
noext_cnt >= COMPRESS_EXT_NUM) {
f2fs_err(sbi,
"invalid extension length/number");
kfree(name);
return -EINVAL;
}
strcpy(noext[noext_cnt], name);
F2FS_OPTION(sbi).nocompress_ext_cnt++;
kfree(name);
break;
case Opt_compress_chksum:
if (!f2fs_sb_has_compression(sbi)) {
f2fs_info(sbi, "Image doesn't support compression");
break;
}
F2FS_OPTION(sbi).compress_chksum = true;
break;
case Opt_compress_mode:
if (!f2fs_sb_has_compression(sbi)) {
f2fs_info(sbi, "Image doesn't support compression");
break;
}
name = match_strdup(&args[0]);
if (!name)
return -ENOMEM;
if (!strcmp(name, "fs")) {
F2FS_OPTION(sbi).compress_mode = COMPR_MODE_FS;
} else if (!strcmp(name, "user")) {
F2FS_OPTION(sbi).compress_mode = COMPR_MODE_USER;
} else {
kfree(name);
return -EINVAL;
}
kfree(name);
break;
case Opt_compress_cache:
if (!f2fs_sb_has_compression(sbi)) {
f2fs_info(sbi, "Image doesn't support compression");
break;
}
set_opt(sbi, COMPRESS_CACHE);
break;
#else
case Opt_compress_algorithm:
case Opt_compress_log_size:
case Opt_compress_extension:
case Opt_nocompress_extension:
case Opt_compress_chksum:
case Opt_compress_mode:
case Opt_compress_cache:
f2fs_info(sbi, "compression options not supported");
break;
#endif
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 16:14:49 +03:00
case Opt_atgc:
set_opt(sbi, ATGC);
break;
case Opt_gc_merge:
set_opt(sbi, GC_MERGE);
break;
case Opt_nogc_merge:
clear_opt(sbi, GC_MERGE);
break;
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 03:15:43 +03:00
case Opt_discard_unit:
name = match_strdup(&args[0]);
if (!name)
return -ENOMEM;
if (!strcmp(name, "block")) {
F2FS_OPTION(sbi).discard_unit =
DISCARD_UNIT_BLOCK;
} else if (!strcmp(name, "segment")) {
F2FS_OPTION(sbi).discard_unit =
DISCARD_UNIT_SEGMENT;
} else if (!strcmp(name, "section")) {
F2FS_OPTION(sbi).discard_unit =
DISCARD_UNIT_SECTION;
} else {
kfree(name);
return -EINVAL;
}
kfree(name);
break;
case Opt_memory_mode:
name = match_strdup(&args[0]);
if (!name)
return -ENOMEM;
if (!strcmp(name, "normal")) {
F2FS_OPTION(sbi).memory_mode =
MEMORY_MODE_NORMAL;
} else if (!strcmp(name, "low")) {
F2FS_OPTION(sbi).memory_mode =
MEMORY_MODE_LOW;
} else {
kfree(name);
return -EINVAL;
}
kfree(name);
break;
f2fs: add block_age-based extent cache This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-02 04:37:15 +03:00
case Opt_age_extent_cache:
set_opt(sbi, AGE_EXTENT_CACHE);
break;
case Opt_errors:
name = match_strdup(&args[0]);
if (!name)
return -ENOMEM;
if (!strcmp(name, "remount-ro")) {
F2FS_OPTION(sbi).errors =
MOUNT_ERRORS_READONLY;
} else if (!strcmp(name, "continue")) {
F2FS_OPTION(sbi).errors =
MOUNT_ERRORS_CONTINUE;
} else if (!strcmp(name, "panic")) {
F2FS_OPTION(sbi).errors =
MOUNT_ERRORS_PANIC;
} else {
kfree(name);
return -EINVAL;
}
kfree(name);
break;
default:
f2fs_err(sbi, "Unrecognized mount option \"%s\" or missing value",
p);
return -EINVAL;
}
}
default_check:
#ifdef CONFIG_QUOTA
if (f2fs_check_quota_options(sbi))
return -EINVAL;
#else
if (f2fs_sb_has_quota_ino(sbi) && !f2fs_readonly(sbi->sb)) {
f2fs_info(sbi, "Filesystem with quota feature cannot be mounted RDWR without CONFIG_QUOTA");
return -EINVAL;
}
if (f2fs_sb_has_project_quota(sbi) && !f2fs_readonly(sbi->sb)) {
f2fs_err(sbi, "Filesystem with project quota feature cannot be mounted RDWR without CONFIG_QUOTA");
return -EINVAL;
}
#endif
#if !IS_ENABLED(CONFIG_UNICODE)
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
if (f2fs_sb_has_casefold(sbi)) {
f2fs_err(sbi,
"Filesystem with casefold feature cannot be mounted without CONFIG_UNICODE");
return -EINVAL;
}
#endif
/*
* The BLKZONED feature indicates that the drive was formatted with
* zone alignment optimization. This is optional for host-aware
* devices, but mandatory for host-managed zoned block devices.
*/
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 03:15:43 +03:00
if (f2fs_sb_has_blkzoned(sbi)) {
#ifdef CONFIG_BLK_DEV_ZONED
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 03:15:43 +03:00
if (F2FS_OPTION(sbi).discard_unit !=
DISCARD_UNIT_SECTION) {
f2fs_info(sbi, "Zoned block device doesn't need small discard, set discard_unit=section by default");
F2FS_OPTION(sbi).discard_unit =
DISCARD_UNIT_SECTION;
}
#else
f2fs_err(sbi, "Zoned block device support is not enabled");
return -EINVAL;
#endif
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 03:15:43 +03:00
}
#ifdef CONFIG_F2FS_FS_COMPRESSION
if (f2fs_test_compress_extension(sbi)) {
f2fs_err(sbi, "invalid compress or nocompress extension");
return -EINVAL;
}
#endif
if (F2FS_IO_SIZE_BITS(sbi) && !f2fs_lfs_mode(sbi)) {
f2fs_err(sbi, "Should set mode=lfs with %luKB-sized IO",
F2FS_IO_SIZE_KB(sbi));
return -EINVAL;
}
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
if (test_opt(sbi, INLINE_XATTR_SIZE)) {
int min_size, max_size;
if (!f2fs_sb_has_extra_attr(sbi) ||
!f2fs_sb_has_flexible_inline_xattr(sbi)) {
f2fs_err(sbi, "extra_attr or flexible_inline_xattr feature is off");
return -EINVAL;
}
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
if (!test_opt(sbi, INLINE_XATTR)) {
f2fs_err(sbi, "inline_xattr_size option should be set with inline_xattr option");
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
return -EINVAL;
}
min_size = sizeof(struct f2fs_xattr_header) / sizeof(__le32);
f2fs: fix to do sanity check with inode.i_inline_xattr_size As Paul Bandha reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202709 When I run the poc on the mounted f2fs img I get a buffer overflow in read_inline_xattr due to there being no sanity check on the value of i_inline_xattr_size. I created the img by just modifying the value of i_inline_xattr_size in the inode: i_name [test1.txt] i_ext: fofs:0 blkaddr:0 len:0 i_extra_isize [0x 18 : 24] i_inline_xattr_size [0x ffff : 65535] i_addr[ofs] [0x 0 : 0] mkdir /mnt/f2fs mount ./f2fs1.img /mnt/f2fs gcc poc.c -o poc ./poc int main() { int y = syscall(SYS_listxattr, "/mnt/f2fs/test1.txt", NULL, 0); printf("ret %d", y); printf("errno: %d\n", errno); } BUG: KASAN: slab-out-of-bounds in read_inline_xattr+0x18f/0x260 Read of size 262140 at addr ffff88011035efd8 by task f2fs1poc/3263 CPU: 0 PID: 3263 Comm: f2fs1poc Not tainted 4.18.0-custom #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x83/0x250 kasan_report+0x213/0x350 memcpy+0x1f/0x50 read_inline_xattr+0x18f/0x260 read_all_xattrs+0xba/0x190 f2fs_listxattr+0x9d/0x3f0 listxattr+0xb2/0xd0 path_listxattr+0x93/0xe0 do_syscall_64+0x9d/0x220 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Let's add sanity check for inode.i_inline_xattr_size during f2fs_iget() to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-04 12:19:04 +03:00
max_size = MAX_INLINE_XATTR_SIZE;
if (F2FS_OPTION(sbi).inline_xattr_size < min_size ||
F2FS_OPTION(sbi).inline_xattr_size > max_size) {
f2fs_err(sbi, "inline xattr size is out of range: %d ~ %d",
min_size, max_size);
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
return -EINVAL;
}
}
if (test_opt(sbi, DISABLE_CHECKPOINT) && f2fs_lfs_mode(sbi)) {
f2fs_err(sbi, "LFS is not compatible with checkpoint=disable");
return -EINVAL;
}
if (test_opt(sbi, ATGC) && f2fs_lfs_mode(sbi)) {
f2fs_err(sbi, "LFS is not compatible with ATGC");
return -EINVAL;
}
if (f2fs_is_readonly(sbi) && test_opt(sbi, FLUSH_MERGE)) {
f2fs_err(sbi, "FLUSH_MERGE not compatible with readonly mode");
return -EINVAL;
}
if (f2fs_sb_has_readonly(sbi) && !f2fs_readonly(sbi->sb)) {
f2fs_err(sbi, "Allow to mount readonly mode only");
return -EROFS;
}
return 0;
}
static struct inode *f2fs_alloc_inode(struct super_block *sb)
{
struct f2fs_inode_info *fi;
if (time_to_inject(F2FS_SB(sb), FAULT_SLAB_ALLOC))
return NULL;
fi = alloc_inode_sb(sb, f2fs_inode_cachep, GFP_F2FS_ZERO);
if (!fi)
return NULL;
init_once((void *) fi);
/* Initialize f2fs-specific inode info */
atomic_set(&fi->dirty_pages, 0);
atomic_set(&fi->i_compr_blocks, 0);
init_f2fs_rwsem(&fi->i_sem);
f2fs: cover last_disk_size update with spinlock This change solves below hangtask issue: INFO: task kworker/u16:1:58 blocked for more than 122 seconds. Not tainted 5.6.0-rc2-00590-g9983bdae4974e #11 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u16:1 D 0 58 2 0x00000000 Workqueue: writeback wb_workfn (flush-179:0) Backtrace: (__schedule) from [<c0913234>] (schedule+0x78/0xf4) (schedule) from [<c017ec74>] (rwsem_down_write_slowpath+0x24c/0x4c0) (rwsem_down_write_slowpath) from [<c0915f2c>] (down_write+0x6c/0x70) (down_write) from [<c0435b80>] (f2fs_write_single_data_page+0x608/0x7ac) (f2fs_write_single_data_page) from [<c0435fd8>] (f2fs_write_cache_pages+0x2b4/0x7c4) (f2fs_write_cache_pages) from [<c043682c>] (f2fs_write_data_pages+0x344/0x35c) (f2fs_write_data_pages) from [<c0267ee8>] (do_writepages+0x3c/0xd4) (do_writepages) from [<c0310cbc>] (__writeback_single_inode+0x44/0x454) (__writeback_single_inode) from [<c03112d0>] (writeback_sb_inodes+0x204/0x4b0) (writeback_sb_inodes) from [<c03115cc>] (__writeback_inodes_wb+0x50/0xe4) (__writeback_inodes_wb) from [<c03118f4>] (wb_writeback+0x294/0x338) (wb_writeback) from [<c0312dac>] (wb_workfn+0x35c/0x54c) (wb_workfn) from [<c014f2b8>] (process_one_work+0x214/0x544) (process_one_work) from [<c014f634>] (worker_thread+0x4c/0x574) (worker_thread) from [<c01564fc>] (kthread+0x144/0x170) (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Reported-and-tested-by: Ondřej Jirman <megi@xff.cz> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-02-27 14:30:03 +03:00
spin_lock_init(&fi->i_size_lock);
INIT_LIST_HEAD(&fi->dirty_list);
INIT_LIST_HEAD(&fi->gdirty_list);
init_f2fs_rwsem(&fi->i_gc_rwsem[READ]);
init_f2fs_rwsem(&fi->i_gc_rwsem[WRITE]);
init_f2fs_rwsem(&fi->i_xattr_sem);
/* Will be used by directory only */
fi->i_dir_level = F2FS_SB(sb)->dir_level;
return &fi->vfs_inode;
}
static int f2fs_drop_inode(struct inode *inode)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
int ret;
/*
* during filesystem shutdown, if checkpoint is disabled,
* drop useless meta/node dirty pages.
*/
if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED))) {
if (inode->i_ino == F2FS_NODE_INO(sbi) ||
inode->i_ino == F2FS_META_INO(sbi)) {
trace_f2fs_drop_inode(inode, 1);
return 1;
}
}
/*
* This is to avoid a deadlock condition like below.
* writeback_single_inode(inode)
* - f2fs_write_data_page
* - f2fs_gc -> iput -> evict
* - inode_wait_for_writeback(inode)
*/
if ((!inode_unhashed(inode) && inode->i_state & I_SYNC)) {
if (!inode->i_nlink && !is_bad_inode(inode)) {
/* to avoid evict_inode call simultaneously */
atomic_inc(&inode->i_count);
spin_unlock(&inode->i_lock);
/* should remain fi->extent_tree for writepage */
f2fs_destroy_extent_node(inode);
sb_start_intwrite(inode->i_sb);
f2fs_i_size_write(inode, 0);
f2fs_submit_merged_write_cond(F2FS_I_SB(inode),
inode, NULL, 0, DATA);
truncate_inode_pages_final(inode->i_mapping);
if (F2FS_HAS_BLOCKS(inode))
f2fs_truncate(inode);
sb_end_intwrite(inode->i_sb);
spin_lock(&inode->i_lock);
atomic_dec(&inode->i_count);
}
trace_f2fs_drop_inode(inode, 0);
return 0;
}
ret = generic_drop_inode(inode);
if (!ret)
ret = fscrypt_drop_inode(inode);
trace_f2fs_drop_inode(inode, ret);
return ret;
}
int f2fs_inode_dirtied(struct inode *inode, bool sync)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
int ret = 0;
spin_lock(&sbi->inode_lock[DIRTY_META]);
if (is_inode_flag_set(inode, FI_DIRTY_INODE)) {
ret = 1;
} else {
set_inode_flag(inode, FI_DIRTY_INODE);
stat_inc_dirty_inode(sbi, DIRTY_META);
}
if (sync && list_empty(&F2FS_I(inode)->gdirty_list)) {
list_add_tail(&F2FS_I(inode)->gdirty_list,
&sbi->inode_list[DIRTY_META]);
inc_page_count(sbi, F2FS_DIRTY_IMETA);
}
spin_unlock(&sbi->inode_lock[DIRTY_META]);
return ret;
}
void f2fs_inode_synced(struct inode *inode)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
spin_lock(&sbi->inode_lock[DIRTY_META]);
if (!is_inode_flag_set(inode, FI_DIRTY_INODE)) {
spin_unlock(&sbi->inode_lock[DIRTY_META]);
return;
}
if (!list_empty(&F2FS_I(inode)->gdirty_list)) {
list_del_init(&F2FS_I(inode)->gdirty_list);
dec_page_count(sbi, F2FS_DIRTY_IMETA);
}
clear_inode_flag(inode, FI_DIRTY_INODE);
clear_inode_flag(inode, FI_AUTO_RECOVER);
stat_dec_dirty_inode(F2FS_I_SB(inode), DIRTY_META);
spin_unlock(&sbi->inode_lock[DIRTY_META]);
}
/*
* f2fs_dirty_inode() is called from __mark_inode_dirty()
*
* We should call set_dirty_inode to write the dirty inode through write_inode.
*/
static void f2fs_dirty_inode(struct inode *inode, int flags)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
if (inode->i_ino == F2FS_NODE_INO(sbi) ||
inode->i_ino == F2FS_META_INO(sbi))
return;
if (is_inode_flag_set(inode, FI_AUTO_RECOVER))
clear_inode_flag(inode, FI_AUTO_RECOVER);
f2fs_inode_dirtied(inode, false);
}
static void f2fs_free_inode(struct inode *inode)
{
fscrypt_free_inode(inode);
kmem_cache_free(f2fs_inode_cachep, F2FS_I(inode));
}
static void destroy_percpu_info(struct f2fs_sb_info *sbi)
{
percpu_counter_destroy(&sbi->total_valid_inode_count);
percpu_counter_destroy(&sbi->rf_node_block_count);
percpu_counter_destroy(&sbi->alloc_valid_block_count);
}
static void destroy_device_list(struct f2fs_sb_info *sbi)
{
int i;
for (i = 0; i < sbi->s_ndevs; i++) {
blkdev_put(FDEV(i).bdev, FMODE_EXCL);
#ifdef CONFIG_BLK_DEV_ZONED
kvfree(FDEV(i).blkz_seq);
#endif
}
kvfree(sbi->devs);
}
static void f2fs_put_super(struct super_block *sb)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
int i;
int err = 0;
bool done;
/* unregister procfs/sysfs entries in advance to avoid race case */
f2fs_unregister_sysfs(sbi);
f2fs_quota_off_umount(sb);
/* prevent remaining shrinker jobs */
mutex_lock(&sbi->umount_mutex);
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 03:00:42 +03:00
/*
* flush all issued checkpoints and stop checkpoint issue thread.
* after then, all checkpoints should be done by each process context.
*/
f2fs_stop_ckpt_thread(sbi);
/*
* We don't need to do checkpoint when superblock is clean.
* But, the previous checkpoint was not done by umount, it needs to do
* clean checkpoint again.
*/
if ((is_sbi_flag_set(sbi, SBI_IS_DIRTY) ||
!is_set_ckpt_flags(sbi, CP_UMOUNT_FLAG))) {
struct cp_control cpc = {
.reason = CP_UMOUNT,
};
err = f2fs_write_checkpoint(sbi, &cpc);
}
/* be sure to wait for any on-going discard commands */
done = f2fs_issue_discard_timeout(sbi);
if (f2fs_realtime_discard_enable(sbi) && !sbi->discard_blks && done) {
struct cp_control cpc = {
.reason = CP_UMOUNT | CP_TRIMMED,
};
err = f2fs_write_checkpoint(sbi, &cpc);
}
/*
* normally superblock is clean, so we need to release this.
* In addition, EIO will skip do checkpoint, we need this as well.
*/
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_release_ino_entry(sbi, true);
f2fs_leave_shrinker(sbi);
mutex_unlock(&sbi->umount_mutex);
/* our cp_error case, we can wait for any writeback page */
f2fs_flush_merged_writes(sbi);
f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA);
f2fs: fix to avoid broken of dnode block list f2fs recovery flow is relying on dnode block link list, it means fsynced file recovery depends on previous dnode's persistence in the list, so during fsync() we should wait on all regular inode's dnode writebacked before issuing flush. By this way, we can avoid dnode block list being broken by out-of-order IO submission due to IO scheduler or driver. Sheng Yong helps to do the test with this patch: Target:/data (f2fs, -) 64MB / 32768KB / 4KB / 8 1 / PERSIST / Index Base: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08 2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7 3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48 Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333 After: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 798.81 202.5 41143 40613.87 602.71 838.08 913.83 2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27 3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91 Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333 Patched/Original: 0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189 It looks like atomic write will suffer performance regression. I suspect that the criminal is that we forcing to wait all dnode being in storage cache before we issue PREFLUSH+FUA. BTW, will commit ("f2fs: don't need to wait for node writes for atomic write") cause the problem: we will lose data of last transaction after SPO, even if atomic write return no error: - atomic_open(); - write() P1, P2, P3; - atomic_commit(); - writeback data: P1, P2, P3; - writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing last transaction. - preflush + fua; - power-cut If we don't wait dnode writeback for atomic_write: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85 2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77 3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92 Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18 Patched/Original: 0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294 SQLite's performance recovers. Jaegeuk: "Practically, I don't see db corruption becase of this. We can excuse to lose the last transaction." Finally, we decide to keep original implementation of atomic write interface sematics that we don't wait all dnode writeback before preflush+fua submission. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
if (err) {
truncate_inode_pages_final(NODE_MAPPING(sbi));
truncate_inode_pages_final(META_MAPPING(sbi));
}
for (i = 0; i < NR_COUNT_TYPE; i++) {
if (!get_pages(sbi, i))
continue;
f2fs_err(sbi, "detect filesystem reference count leak during "
"umount, type: %d, count: %lld", i, get_pages(sbi, i));
f2fs_bug_on(sbi, 1);
}
f2fs: fix to avoid broken of dnode block list f2fs recovery flow is relying on dnode block link list, it means fsynced file recovery depends on previous dnode's persistence in the list, so during fsync() we should wait on all regular inode's dnode writebacked before issuing flush. By this way, we can avoid dnode block list being broken by out-of-order IO submission due to IO scheduler or driver. Sheng Yong helps to do the test with this patch: Target:/data (f2fs, -) 64MB / 32768KB / 4KB / 8 1 / PERSIST / Index Base: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08 2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7 3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48 Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333 After: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 798.81 202.5 41143 40613.87 602.71 838.08 913.83 2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27 3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91 Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333 Patched/Original: 0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189 It looks like atomic write will suffer performance regression. I suspect that the criminal is that we forcing to wait all dnode being in storage cache before we issue PREFLUSH+FUA. BTW, will commit ("f2fs: don't need to wait for node writes for atomic write") cause the problem: we will lose data of last transaction after SPO, even if atomic write return no error: - atomic_open(); - write() P1, P2, P3; - atomic_commit(); - writeback data: P1, P2, P3; - writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing last transaction. - preflush + fua; - power-cut If we don't wait dnode writeback for atomic_write: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85 2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77 3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92 Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18 Patched/Original: 0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294 SQLite's performance recovers. Jaegeuk: "Practically, I don't see db corruption becase of this. We can excuse to lose the last transaction." Finally, we decide to keep original implementation of atomic write interface sematics that we don't wait all dnode writeback before preflush+fua submission. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
f2fs_bug_on(sbi, sbi->fsync_node_num);
f2fs_destroy_compress_inode(sbi);
iput(sbi->node_inode);
sbi->node_inode = NULL;
iput(sbi->meta_inode);
sbi->meta_inode = NULL;
/*
* iput() can update stat information, if f2fs_write_checkpoint()
* above failed with error.
*/
f2fs_destroy_stats(sbi);
/* destroy f2fs internal modules */
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_destroy_node_manager(sbi);
f2fs_destroy_segment_manager(sbi);
/* flush s_error_work before sbi destroy */
flush_work(&sbi->s_error_work);
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
f2fs_destroy_post_read_wq(sbi);
kvfree(sbi->ckpt);
sb->s_fs_info = NULL;
if (sbi->s_chksum_driver)
crypto_free_shash(sbi->s_chksum_driver);
kfree(sbi->raw_super);
destroy_device_list(sbi);
f2fs_destroy_page_array_cache(sbi);
f2fs_destroy_xattr_caches(sbi);
mempool_destroy(sbi->write_io_dummy);
#ifdef CONFIG_QUOTA
for (i = 0; i < MAXQUOTAS; i++)
kfree(F2FS_OPTION(sbi).s_qf_names[i]);
#endif
fscrypt: handle test_dummy_encryption in more logical way The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-17 07:11:35 +03:00
fscrypt_free_dummy_policy(&F2FS_OPTION(sbi).dummy_enc_policy);
destroy_percpu_info(sbi);
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 01:29:09 +03:00
f2fs_destroy_iostat(sbi);
for (i = 0; i < NR_PAGE_TYPE; i++)
kvfree(sbi->write_io[i]);
#if IS_ENABLED(CONFIG_UNICODE)
utf8_unload(sb->s_encoding);
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
#endif
kfree(sbi);
}
int f2fs_sync_fs(struct super_block *sb, int sync)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
int err = 0;
if (unlikely(f2fs_cp_error(sbi)))
return 0;
if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED)))
return 0;
trace_f2fs_sync_fs(sb, sync);
if (unlikely(is_sbi_flag_set(sbi, SBI_POR_DOING)))
return -EAGAIN;
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 03:00:42 +03:00
if (sync)
err = f2fs_issue_checkpoint(sbi);
return err;
}
static int f2fs_freeze(struct super_block *sb)
{
if (f2fs_readonly(sb))
return 0;
f2fs: remove checkpoint in f2fs_freeze The generic freeze_super() calls sync_filesystems() before f2fs_freeze(). So, basically we don't need to do checkpoint in f2fs_freeze(). But, in xfs/068, it triggers circular locking problem below due to gc_mutex for checkpoint. ====================================================== [ INFO: possible circular locking dependency detected ] 4.9.0-rc1+ #132 Tainted: G OE ------------------------------------------------------- 1. wait for __sb_start_write() by [<ffffffff9845f353>] dump_stack+0x85/0xc2 [<ffffffff980e80bf>] print_circular_bug+0x1cf/0x230 [<ffffffff980eb4d0>] __lock_acquire+0x19e0/0x1bc0 [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff9826bdd0>] __sb_start_write+0x130/0x200 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffffc08c7c3b>] f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff98289991>] iput+0x171/0x2c0 [<ffffffffc08cfccf>] f2fs_sync_inode_meta+0x3f/0xf0 [f2fs] [<ffffffffc08cfe04>] block_operations+0x84/0x110 [f2fs] [<ffffffffc08cff78>] write_checkpoint+0xe8/0xf20 [f2fs] [<ffffffff980e979d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffff9803e9d9>] ? sched_clock+0x9/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c6df5>] f2fs_sync_fs+0x85/0x190 [f2fs] [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4fb0>] sync_fs_one_sb+0x20/0x30 [<ffffffff9826ca3e>] iterate_supers+0xae/0x100 [<ffffffff982a50b5>] sys_sync+0x55/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 2. wait for sbi->gc_mutex by [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffff989063d6>] mutex_lock_nested+0x76/0x3f0 [<ffffffffc08c6de9>] f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c7a6c>] f2fs_freeze+0x1c/0x20 [f2fs] [<ffffffff9826b6ef>] freeze_super+0xcf/0x190 [<ffffffff9827eebc>] do_vfs_ioctl+0x53c/0x6a0 [<ffffffff9827f099>] SyS_ioctl+0x79/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-05 00:59:15 +03:00
/* IO error happened before */
if (unlikely(f2fs_cp_error(F2FS_SB(sb))))
return -EIO;
/* must be clean, since sync_filesystem() was already called */
if (is_sbi_flag_set(F2FS_SB(sb), SBI_IS_DIRTY))
return -EINVAL;
/* Let's flush checkpoints and stop the thread. */
f2fs_flush_ckpt_thread(F2FS_SB(sb));
/* to avoid deadlock on f2fs_evict_inode->SB_FREEZE_FS */
set_sbi_flag(F2FS_SB(sb), SBI_IS_FREEZING);
f2fs: remove checkpoint in f2fs_freeze The generic freeze_super() calls sync_filesystems() before f2fs_freeze(). So, basically we don't need to do checkpoint in f2fs_freeze(). But, in xfs/068, it triggers circular locking problem below due to gc_mutex for checkpoint. ====================================================== [ INFO: possible circular locking dependency detected ] 4.9.0-rc1+ #132 Tainted: G OE ------------------------------------------------------- 1. wait for __sb_start_write() by [<ffffffff9845f353>] dump_stack+0x85/0xc2 [<ffffffff980e80bf>] print_circular_bug+0x1cf/0x230 [<ffffffff980eb4d0>] __lock_acquire+0x19e0/0x1bc0 [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff9826bdd0>] __sb_start_write+0x130/0x200 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffffc08c7c3b>] f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff98289991>] iput+0x171/0x2c0 [<ffffffffc08cfccf>] f2fs_sync_inode_meta+0x3f/0xf0 [f2fs] [<ffffffffc08cfe04>] block_operations+0x84/0x110 [f2fs] [<ffffffffc08cff78>] write_checkpoint+0xe8/0xf20 [f2fs] [<ffffffff980e979d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffff9803e9d9>] ? sched_clock+0x9/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c6df5>] f2fs_sync_fs+0x85/0x190 [f2fs] [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4fb0>] sync_fs_one_sb+0x20/0x30 [<ffffffff9826ca3e>] iterate_supers+0xae/0x100 [<ffffffff982a50b5>] sys_sync+0x55/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 2. wait for sbi->gc_mutex by [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffff989063d6>] mutex_lock_nested+0x76/0x3f0 [<ffffffffc08c6de9>] f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c7a6c>] f2fs_freeze+0x1c/0x20 [f2fs] [<ffffffff9826b6ef>] freeze_super+0xcf/0x190 [<ffffffff9827eebc>] do_vfs_ioctl+0x53c/0x6a0 [<ffffffff9827f099>] SyS_ioctl+0x79/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-05 00:59:15 +03:00
return 0;
}
static int f2fs_unfreeze(struct super_block *sb)
{
clear_sbi_flag(F2FS_SB(sb), SBI_IS_FREEZING);
return 0;
}
#ifdef CONFIG_QUOTA
static int f2fs_statfs_project(struct super_block *sb,
kprojid_t projid, struct kstatfs *buf)
{
struct kqid qid;
struct dquot *dquot;
u64 limit;
u64 curblock;
qid = make_kqid_projid(projid);
dquot = dqget(sb, qid);
if (IS_ERR(dquot))
return PTR_ERR(dquot);
spin_lock(&dquot->dq_dqb_lock);
limit = min_not_zero(dquot->dq_dqb.dqb_bsoftlimit,
dquot->dq_dqb.dqb_bhardlimit);
f2fs: fix miscounted block limit in f2fs_statfs_project() statfs calculates Total/Used/Avail disk space in block unit, so we should translate soft/hard prjquota limit to block unit as well. Below testing result shows the block/inode numbers of Total/Used/Avail from df command are all correct afer applying this patch. [root@localhost quota-tools]\# ./repquota -P /dev/sdb1 *** Report for project quotas on device /dev/sdb1 Block grace time: 7days; Inode grace time: 7days Block limits File limits Project used soft hard grace used soft hard grace ----------------------------------------------------------- \#0 -- 4 0 0 1 0 0 \#101 -- 0 0 0 2 0 0 \#102 -- 0 10240 0 2 10 0 \#103 -- 0 0 20480 2 0 20 \#104 -- 0 10240 20480 2 10 20 \#105 -- 0 20480 10240 2 20 10 [root@localhost sdb1]\# lsattr -p t{1,2,3,4,5} 101 ----------------N-- t1/a1 102 ----------------N-- t2/a2 103 ----------------N-- t3/a3 104 ----------------N-- t4/a4 105 ----------------N-- t5/a5 [root@localhost sdb1]\# df -hi t{1,2,3,4,5} Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sdb1 2.4M 21 2.4M 1% /mnt/sdb1 /dev/sdb1 10 2 8 20% /mnt/sdb1 /dev/sdb1 20 2 18 10% /mnt/sdb1 /dev/sdb1 10 2 8 20% /mnt/sdb1 /dev/sdb1 10 2 8 20% /mnt/sdb1 [root@localhost sdb1]\# df -h t{1,2,3,4,5} Filesystem Size Used Avail Use% Mounted on /dev/sdb1 10G 489M 9.6G 5% /mnt/sdb1 /dev/sdb1 10M 0 10M 0% /mnt/sdb1 /dev/sdb1 20M 0 20M 0% /mnt/sdb1 /dev/sdb1 10M 0 10M 0% /mnt/sdb1 /dev/sdb1 10M 0 10M 0% /mnt/sdb1 Fixes: 909110c060f2 ("f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()") Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-01-04 17:20:03 +03:00
if (limit)
limit >>= sb->s_blocksize_bits;
if (limit && buf->f_blocks > limit) {
curblock = (dquot->dq_dqb.dqb_curspace +
dquot->dq_dqb.dqb_rsvspace) >> sb->s_blocksize_bits;
buf->f_blocks = limit;
buf->f_bfree = buf->f_bavail =
(buf->f_blocks > curblock) ?
(buf->f_blocks - curblock) : 0;
}
limit = min_not_zero(dquot->dq_dqb.dqb_isoftlimit,
dquot->dq_dqb.dqb_ihardlimit);
if (limit && buf->f_files > limit) {
buf->f_files = limit;
buf->f_ffree =
(buf->f_files > dquot->dq_dqb.dqb_curinodes) ?
(buf->f_files - dquot->dq_dqb.dqb_curinodes) : 0;
}
spin_unlock(&dquot->dq_dqb_lock);
dqput(dquot);
return 0;
}
#endif
static int f2fs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct super_block *sb = dentry->d_sb;
struct f2fs_sb_info *sbi = F2FS_SB(sb);
u64 id = huge_encode_dev(sb->s_bdev->bd_dev);
block_t total_count, user_block_count, start_count;
u64 avail_node_count;
unsigned int total_valid_node_count;
total_count = le64_to_cpu(sbi->raw_super->block_count);
start_count = le32_to_cpu(sbi->raw_super->segment0_blkaddr);
buf->f_type = F2FS_SUPER_MAGIC;
buf->f_bsize = sbi->blocksize;
buf->f_blocks = total_count - start_count;
spin_lock(&sbi->stat_lock);
user_block_count = sbi->user_block_count;
total_valid_node_count = valid_node_count(sbi);
avail_node_count = sbi->total_node_count - F2FS_RESERVED_NODE_NUM;
buf->f_bfree = user_block_count - valid_user_blocks(sbi) -
sbi->current_reserved_blocks;
if (unlikely(buf->f_bfree <= sbi->unusable_block_count))
buf->f_bfree = 0;
else
buf->f_bfree -= sbi->unusable_block_count;
spin_unlock(&sbi->stat_lock);
if (buf->f_bfree > F2FS_OPTION(sbi).root_reserved_blocks)
buf->f_bavail = buf->f_bfree -
F2FS_OPTION(sbi).root_reserved_blocks;
else
buf->f_bavail = 0;
if (avail_node_count > user_block_count) {
buf->f_files = user_block_count;
buf->f_ffree = buf->f_bavail;
} else {
buf->f_files = avail_node_count;
buf->f_ffree = min(avail_node_count - total_valid_node_count,
buf->f_bavail);
}
buf->f_namelen = F2FS_NAME_LEN;
buf->f_fsid = u64_to_fsid(id);
#ifdef CONFIG_QUOTA
if (is_inode_flag_set(dentry->d_inode, FI_PROJ_INHERIT) &&
sb_has_quota_limits_enabled(sb, PRJQUOTA)) {
f2fs_statfs_project(sb, F2FS_I(dentry->d_inode)->i_projid, buf);
}
#endif
return 0;
}
static inline void f2fs_show_quota_options(struct seq_file *seq,
struct super_block *sb)
{
#ifdef CONFIG_QUOTA
struct f2fs_sb_info *sbi = F2FS_SB(sb);
if (F2FS_OPTION(sbi).s_jquota_fmt) {
char *fmtname = "";
switch (F2FS_OPTION(sbi).s_jquota_fmt) {
case QFMT_VFS_OLD:
fmtname = "vfsold";
break;
case QFMT_VFS_V0:
fmtname = "vfsv0";
break;
case QFMT_VFS_V1:
fmtname = "vfsv1";
break;
}
seq_printf(seq, ",jqfmt=%s", fmtname);
}
if (F2FS_OPTION(sbi).s_qf_names[USRQUOTA])
seq_show_option(seq, "usrjquota",
F2FS_OPTION(sbi).s_qf_names[USRQUOTA]);
if (F2FS_OPTION(sbi).s_qf_names[GRPQUOTA])
seq_show_option(seq, "grpjquota",
F2FS_OPTION(sbi).s_qf_names[GRPQUOTA]);
if (F2FS_OPTION(sbi).s_qf_names[PRJQUOTA])
seq_show_option(seq, "prjjquota",
F2FS_OPTION(sbi).s_qf_names[PRJQUOTA]);
#endif
}
#ifdef CONFIG_F2FS_FS_COMPRESSION
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
static inline void f2fs_show_compress_options(struct seq_file *seq,
struct super_block *sb)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
char *algtype = "";
int i;
if (!f2fs_sb_has_compression(sbi))
return;
switch (F2FS_OPTION(sbi).compress_algorithm) {
case COMPRESS_LZO:
algtype = "lzo";
break;
case COMPRESS_LZ4:
algtype = "lz4";
break;
case COMPRESS_ZSTD:
algtype = "zstd";
break;
case COMPRESS_LZORLE:
algtype = "lzo-rle";
break;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
}
seq_printf(seq, ",compress_algorithm=%s", algtype);
if (F2FS_OPTION(sbi).compress_level)
seq_printf(seq, ":%d", F2FS_OPTION(sbi).compress_level);
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
seq_printf(seq, ",compress_log_size=%u",
F2FS_OPTION(sbi).compress_log_size);
for (i = 0; i < F2FS_OPTION(sbi).compress_ext_cnt; i++) {
seq_printf(seq, ",compress_extension=%s",
F2FS_OPTION(sbi).extensions[i]);
}
for (i = 0; i < F2FS_OPTION(sbi).nocompress_ext_cnt; i++) {
seq_printf(seq, ",nocompress_extension=%s",
F2FS_OPTION(sbi).noextensions[i]);
}
if (F2FS_OPTION(sbi).compress_chksum)
seq_puts(seq, ",compress_chksum");
if (F2FS_OPTION(sbi).compress_mode == COMPR_MODE_FS)
seq_printf(seq, ",compress_mode=%s", "fs");
else if (F2FS_OPTION(sbi).compress_mode == COMPR_MODE_USER)
seq_printf(seq, ",compress_mode=%s", "user");
if (test_opt(sbi, COMPRESS_CACHE))
seq_puts(seq, ",compress_cache");
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
}
#endif
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
static int f2fs_show_options(struct seq_file *seq, struct dentry *root)
{
struct f2fs_sb_info *sbi = F2FS_SB(root->d_sb);
if (F2FS_OPTION(sbi).bggc_mode == BGGC_MODE_SYNC)
seq_printf(seq, ",background_gc=%s", "sync");
else if (F2FS_OPTION(sbi).bggc_mode == BGGC_MODE_ON)
seq_printf(seq, ",background_gc=%s", "on");
else if (F2FS_OPTION(sbi).bggc_mode == BGGC_MODE_OFF)
seq_printf(seq, ",background_gc=%s", "off");
if (test_opt(sbi, GC_MERGE))
seq_puts(seq, ",gc_merge");
else
seq_puts(seq, ",nogc_merge");
if (test_opt(sbi, DISABLE_ROLL_FORWARD))
seq_puts(seq, ",disable_roll_forward");
if (test_opt(sbi, NORECOVERY))
seq_puts(seq, ",norecovery");
if (test_opt(sbi, DISCARD)) {
seq_puts(seq, ",discard");
if (F2FS_OPTION(sbi).discard_unit == DISCARD_UNIT_BLOCK)
seq_printf(seq, ",discard_unit=%s", "block");
else if (F2FS_OPTION(sbi).discard_unit == DISCARD_UNIT_SEGMENT)
seq_printf(seq, ",discard_unit=%s", "segment");
else if (F2FS_OPTION(sbi).discard_unit == DISCARD_UNIT_SECTION)
seq_printf(seq, ",discard_unit=%s", "section");
} else {
seq_puts(seq, ",nodiscard");
}
if (test_opt(sbi, NOHEAP))
seq_puts(seq, ",no_heap");
else
seq_puts(seq, ",heap");
#ifdef CONFIG_F2FS_FS_XATTR
if (test_opt(sbi, XATTR_USER))
seq_puts(seq, ",user_xattr");
else
seq_puts(seq, ",nouser_xattr");
if (test_opt(sbi, INLINE_XATTR))
seq_puts(seq, ",inline_xattr");
else
seq_puts(seq, ",noinline_xattr");
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
if (test_opt(sbi, INLINE_XATTR_SIZE))
seq_printf(seq, ",inline_xattr_size=%u",
F2FS_OPTION(sbi).inline_xattr_size);
#endif
#ifdef CONFIG_F2FS_FS_POSIX_ACL
if (test_opt(sbi, POSIX_ACL))
seq_puts(seq, ",acl");
else
seq_puts(seq, ",noacl");
#endif
if (test_opt(sbi, DISABLE_EXT_IDENTIFY))
seq_puts(seq, ",disable_ext_identify");
if (test_opt(sbi, INLINE_DATA))
seq_puts(seq, ",inline_data");
else
seq_puts(seq, ",noinline_data");
if (test_opt(sbi, INLINE_DENTRY))
seq_puts(seq, ",inline_dentry");
else
seq_puts(seq, ",noinline_dentry");
if (test_opt(sbi, FLUSH_MERGE))
seq_puts(seq, ",flush_merge");
else
seq_puts(seq, ",noflush_merge");
if (test_opt(sbi, NOBARRIER))
seq_puts(seq, ",nobarrier");
else
seq_puts(seq, ",barrier");
if (test_opt(sbi, FASTBOOT))
seq_puts(seq, ",fastboot");
if (test_opt(sbi, READ_EXTENT_CACHE))
seq_puts(seq, ",extent_cache");
else
seq_puts(seq, ",noextent_cache");
f2fs: add block_age-based extent cache This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-02 04:37:15 +03:00
if (test_opt(sbi, AGE_EXTENT_CACHE))
seq_puts(seq, ",age_extent_cache");
if (test_opt(sbi, DATA_FLUSH))
seq_puts(seq, ",data_flush");
seq_puts(seq, ",mode=");
if (F2FS_OPTION(sbi).fs_mode == FS_MODE_ADAPTIVE)
seq_puts(seq, "adaptive");
else if (F2FS_OPTION(sbi).fs_mode == FS_MODE_LFS)
seq_puts(seq, "lfs");
else if (F2FS_OPTION(sbi).fs_mode == FS_MODE_FRAGMENT_SEG)
seq_puts(seq, "fragment:segment");
else if (F2FS_OPTION(sbi).fs_mode == FS_MODE_FRAGMENT_BLK)
seq_puts(seq, "fragment:block");
seq_printf(seq, ",active_logs=%u", F2FS_OPTION(sbi).active_logs);
if (test_opt(sbi, RESERVE_ROOT))
seq_printf(seq, ",reserve_root=%u,resuid=%u,resgid=%u",
F2FS_OPTION(sbi).root_reserved_blocks,
from_kuid_munged(&init_user_ns,
F2FS_OPTION(sbi).s_resuid),
from_kgid_munged(&init_user_ns,
F2FS_OPTION(sbi).s_resgid));
if (F2FS_IO_SIZE_BITS(sbi))
seq_printf(seq, ",io_bits=%u",
F2FS_OPTION(sbi).write_io_size_bits);
#ifdef CONFIG_F2FS_FAULT_INJECTION
if (test_opt(sbi, FAULT_INJECTION)) {
seq_printf(seq, ",fault_injection=%u",
F2FS_OPTION(sbi).fault_info.inject_rate);
seq_printf(seq, ",fault_type=%u",
F2FS_OPTION(sbi).fault_info.inject_type);
}
#endif
#ifdef CONFIG_QUOTA
if (test_opt(sbi, QUOTA))
seq_puts(seq, ",quota");
if (test_opt(sbi, USRQUOTA))
seq_puts(seq, ",usrquota");
if (test_opt(sbi, GRPQUOTA))
seq_puts(seq, ",grpquota");
if (test_opt(sbi, PRJQUOTA))
seq_puts(seq, ",prjquota");
#endif
f2fs_show_quota_options(seq, sbi->sb);
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-13 02:32:50 +03:00
fscrypt_show_test_dummy_encryption(seq, ',', sbi->sb);
if (sbi->sb->s_flags & SB_INLINECRYPT)
seq_puts(seq, ",inlinecrypt");
if (F2FS_OPTION(sbi).alloc_mode == ALLOC_MODE_DEFAULT)
seq_printf(seq, ",alloc_mode=%s", "default");
else if (F2FS_OPTION(sbi).alloc_mode == ALLOC_MODE_REUSE)
seq_printf(seq, ",alloc_mode=%s", "reuse");
if (test_opt(sbi, DISABLE_CHECKPOINT))
seq_printf(seq, ",checkpoint=disable:%u",
F2FS_OPTION(sbi).unusable_cap);
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 03:00:42 +03:00
if (test_opt(sbi, MERGE_CHECKPOINT))
seq_puts(seq, ",checkpoint_merge");
else
seq_puts(seq, ",nocheckpoint_merge");
if (F2FS_OPTION(sbi).fsync_mode == FSYNC_MODE_POSIX)
seq_printf(seq, ",fsync_mode=%s", "posix");
else if (F2FS_OPTION(sbi).fsync_mode == FSYNC_MODE_STRICT)
seq_printf(seq, ",fsync_mode=%s", "strict");
else if (F2FS_OPTION(sbi).fsync_mode == FSYNC_MODE_NOBARRIER)
seq_printf(seq, ",fsync_mode=%s", "nobarrier");
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
#ifdef CONFIG_F2FS_FS_COMPRESSION
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
f2fs_show_compress_options(seq, sbi->sb);
#endif
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 16:14:49 +03:00
if (test_opt(sbi, ATGC))
seq_puts(seq, ",atgc");
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 03:15:43 +03:00
if (F2FS_OPTION(sbi).memory_mode == MEMORY_MODE_NORMAL)
seq_printf(seq, ",memory=%s", "normal");
else if (F2FS_OPTION(sbi).memory_mode == MEMORY_MODE_LOW)
seq_printf(seq, ",memory=%s", "low");
if (F2FS_OPTION(sbi).errors == MOUNT_ERRORS_READONLY)
seq_printf(seq, ",errors=%s", "remount-ro");
else if (F2FS_OPTION(sbi).errors == MOUNT_ERRORS_CONTINUE)
seq_printf(seq, ",errors=%s", "continue");
else if (F2FS_OPTION(sbi).errors == MOUNT_ERRORS_PANIC)
seq_printf(seq, ",errors=%s", "panic");
return 0;
}
f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) Cc: <stable@vger.kernel.org> Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-23 06:58:22 +03:00
static void default_options(struct f2fs_sb_info *sbi, bool remount)
{
/* init some FS parameters */
f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) Cc: <stable@vger.kernel.org> Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-23 06:58:22 +03:00
if (!remount) {
set_opt(sbi, READ_EXTENT_CACHE);
clear_opt(sbi, DISABLE_CHECKPOINT);
if (f2fs_hw_support_discard(sbi) || f2fs_hw_should_discard(sbi))
set_opt(sbi, DISCARD);
if (f2fs_sb_has_blkzoned(sbi))
F2FS_OPTION(sbi).discard_unit = DISCARD_UNIT_SECTION;
else
F2FS_OPTION(sbi).discard_unit = DISCARD_UNIT_BLOCK;
}
if (f2fs_sb_has_readonly(sbi))
F2FS_OPTION(sbi).active_logs = NR_CURSEG_RO_TYPE;
else
F2FS_OPTION(sbi).active_logs = NR_CURSEG_PERSIST_TYPE;
F2FS_OPTION(sbi).inline_xattr_size = DEFAULT_INLINE_XATTR_ADDRS;
if (le32_to_cpu(F2FS_RAW_SUPER(sbi)->segment_count_main) <=
SMALL_VOLUME_SEGMENTS)
F2FS_OPTION(sbi).alloc_mode = ALLOC_MODE_REUSE;
else
F2FS_OPTION(sbi).alloc_mode = ALLOC_MODE_DEFAULT;
F2FS_OPTION(sbi).fsync_mode = FSYNC_MODE_POSIX;
F2FS_OPTION(sbi).s_resuid = make_kuid(&init_user_ns, F2FS_DEF_RESUID);
F2FS_OPTION(sbi).s_resgid = make_kgid(&init_user_ns, F2FS_DEF_RESGID);
if (f2fs_sb_has_compression(sbi)) {
F2FS_OPTION(sbi).compress_algorithm = COMPRESS_LZ4;
F2FS_OPTION(sbi).compress_log_size = MIN_COMPRESS_LOG_SIZE;
F2FS_OPTION(sbi).compress_ext_cnt = 0;
F2FS_OPTION(sbi).compress_mode = COMPR_MODE_FS;
}
F2FS_OPTION(sbi).bggc_mode = BGGC_MODE_ON;
F2FS_OPTION(sbi).memory_mode = MEMORY_MODE_NORMAL;
F2FS_OPTION(sbi).errors = MOUNT_ERRORS_CONTINUE;
sbi->sb->s_flags &= ~SB_INLINECRYPT;
set_opt(sbi, INLINE_XATTR);
set_opt(sbi, INLINE_DATA);
set_opt(sbi, INLINE_DENTRY);
set_opt(sbi, NOHEAP);
set_opt(sbi, MERGE_CHECKPOINT);
F2FS_OPTION(sbi).unusable_cap = 0;
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 00:05:09 +03:00
sbi->sb->s_flags |= SB_LAZYTIME;
if (!f2fs_is_readonly(sbi))
set_opt(sbi, FLUSH_MERGE);
f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) Cc: <stable@vger.kernel.org> Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-23 06:58:22 +03:00
if (f2fs_sb_has_blkzoned(sbi))
F2FS_OPTION(sbi).fs_mode = FS_MODE_LFS;
f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) Cc: <stable@vger.kernel.org> Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-23 06:58:22 +03:00
else
F2FS_OPTION(sbi).fs_mode = FS_MODE_ADAPTIVE;
#ifdef CONFIG_F2FS_FS_XATTR
set_opt(sbi, XATTR_USER);
#endif
#ifdef CONFIG_F2FS_FS_POSIX_ACL
set_opt(sbi, POSIX_ACL);
#endif
f2fs_build_fault_attr(sbi, 0, 0);
}
#ifdef CONFIG_QUOTA
static int f2fs_enable_quotas(struct super_block *sb);
#endif
static int f2fs_disable_checkpoint(struct f2fs_sb_info *sbi)
{
unsigned int s_flags = sbi->sb->s_flags;
struct cp_control cpc;
unsigned int gc_mode = sbi->gc_mode;
int err = 0;
int ret;
block_t unusable;
if (s_flags & SB_RDONLY) {
f2fs_err(sbi, "checkpoint=disable on readonly fs");
return -EINVAL;
}
sbi->sb->s_flags |= SB_ACTIVE;
/* check if we need more GC first */
unusable = f2fs_get_unusable_blocks(sbi);
if (!f2fs_disable_cp_again(sbi, unusable))
goto skip_gc;
f2fs_update_time(sbi, DISABLE_TIME);
sbi->gc_mode = GC_URGENT_HIGH;
while (!f2fs_time_over(sbi, DISABLE_TIME)) {
struct f2fs_gc_control gc_control = {
.victim_segno = NULL_SEGNO,
.init_gc_type = FG_GC,
.should_migrate_blocks = false,
.err_gc_skipped = true,
.nr_free_secs = 1 };
f2fs_down_write(&sbi->gc_lock);
err = f2fs_gc(sbi, &gc_control);
if (err == -ENODATA) {
err = 0;
break;
}
if (err && err != -EAGAIN)
break;
}
ret = sync_filesystem(sbi->sb);
if (ret || err) {
err = ret ? ret : err;
goto restore_flag;
}
unusable = f2fs_get_unusable_blocks(sbi);
if (f2fs_disable_cp_again(sbi, unusable)) {
err = -EAGAIN;
goto restore_flag;
}
skip_gc:
f2fs_down_write(&sbi->gc_lock);
cpc.reason = CP_PAUSE;
set_sbi_flag(sbi, SBI_CP_DISABLED);
err = f2fs_write_checkpoint(sbi, &cpc);
if (err)
goto out_unlock;
spin_lock(&sbi->stat_lock);
sbi->unusable_block_count = unusable;
spin_unlock(&sbi->stat_lock);
out_unlock:
f2fs_up_write(&sbi->gc_lock);
restore_flag:
sbi->gc_mode = gc_mode;
sbi->sb->s_flags = s_flags; /* Restore SB_RDONLY status */
return err;
}
static void f2fs_enable_checkpoint(struct f2fs_sb_info *sbi)
{
int retry = DEFAULT_RETRY_IO_COUNT;
/* we should flush all the data to keep data consistency */
do {
sync_inodes_sb(sbi->sb);
f2fs_io_schedule_timeout(DEFAULT_IO_TIMEOUT);
} while (get_pages(sbi, F2FS_DIRTY_DATA) && retry--);
if (unlikely(retry < 0))
f2fs_warn(sbi, "checkpoint=enable has some unwritten data.");
f2fs_down_write(&sbi->gc_lock);
f2fs_dirty_to_prefree(sbi);
clear_sbi_flag(sbi, SBI_CP_DISABLED);
set_sbi_flag(sbi, SBI_IS_DIRTY);
f2fs_up_write(&sbi->gc_lock);
f2fs_sync_fs(sbi->sb, 1);
/* Let's ensure there's no pending checkpoint anymore */
f2fs_flush_ckpt_thread(sbi);
}
static int f2fs_remount(struct super_block *sb, int *flags, char *data)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
struct f2fs_mount_info org_mount_opt;
unsigned long old_sb_flags;
int err;
bool need_restart_gc = false, need_stop_gc = false;
bool need_restart_ckpt = false, need_stop_ckpt = false;
bool need_restart_flush = false, need_stop_flush = false;
bool need_restart_discard = false, need_stop_discard = false;
bool no_read_extent_cache = !test_opt(sbi, READ_EXTENT_CACHE);
f2fs: add block_age-based extent cache This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-02 04:37:15 +03:00
bool no_age_extent_cache = !test_opt(sbi, AGE_EXTENT_CACHE);
bool enable_checkpoint = !test_opt(sbi, DISABLE_CHECKPOINT);
bool no_io_align = !F2FS_IO_ALIGNED(sbi);
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 16:14:49 +03:00
bool no_atgc = !test_opt(sbi, ATGC);
bool no_discard = !test_opt(sbi, DISCARD);
bool no_compress_cache = !test_opt(sbi, COMPRESS_CACHE);
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 03:15:43 +03:00
bool block_unit_discard = f2fs_block_unit_discard(sbi);
#ifdef CONFIG_QUOTA
int i, j;
#endif
/*
* Save the old mount options in case we
* need to restore them.
*/
org_mount_opt = sbi->mount_opt;
old_sb_flags = sb->s_flags;
#ifdef CONFIG_QUOTA
org_mount_opt.s_jquota_fmt = F2FS_OPTION(sbi).s_jquota_fmt;
for (i = 0; i < MAXQUOTAS; i++) {
if (F2FS_OPTION(sbi).s_qf_names[i]) {
org_mount_opt.s_qf_names[i] =
kstrdup(F2FS_OPTION(sbi).s_qf_names[i],
GFP_KERNEL);
if (!org_mount_opt.s_qf_names[i]) {
for (j = 0; j < i; j++)
kfree(org_mount_opt.s_qf_names[j]);
return -ENOMEM;
}
} else {
org_mount_opt.s_qf_names[i] = NULL;
}
}
#endif
/* recover superblocks we couldn't write due to previous RO mount */
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 00:05:09 +03:00
if (!(*flags & SB_RDONLY) && is_sbi_flag_set(sbi, SBI_NEED_SB_WRITE)) {
err = f2fs_commit_super(sbi, false);
f2fs_info(sbi, "Try to recover all the superblocks, ret: %d",
err);
if (!err)
clear_sbi_flag(sbi, SBI_NEED_SB_WRITE);
}
f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) Cc: <stable@vger.kernel.org> Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-23 06:58:22 +03:00
default_options(sbi, true);
/* parse mount options */
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-13 02:32:50 +03:00
err = parse_options(sb, data, true);
if (err)
goto restore_opts;
/* flush outstanding errors before changing fs state */
flush_work(&sbi->s_error_work);
/*
* Previous and new state of filesystem is RO,
* so skip checking GC and FLUSH_MERGE conditions.
*/
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 00:05:09 +03:00
if (f2fs_readonly(sb) && (*flags & SB_RDONLY))
goto skip;
if (f2fs_dev_is_readonly(sbi) && !(*flags & SB_RDONLY)) {
err = -EROFS;
goto restore_opts;
}
#ifdef CONFIG_QUOTA
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 00:05:09 +03:00
if (!f2fs_readonly(sb) && (*flags & SB_RDONLY)) {
err = dquot_suspend(sb, -1);
if (err < 0)
goto restore_opts;
} else if (f2fs_readonly(sb) && !(*flags & SB_RDONLY)) {
/* dquot_resume needs RW */
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 00:05:09 +03:00
sb->s_flags &= ~SB_RDONLY;
if (sb_any_quota_suspended(sb)) {
dquot_resume(sb, -1);
} else if (f2fs_sb_has_quota_ino(sbi)) {
err = f2fs_enable_quotas(sb);
if (err)
goto restore_opts;
}
}
#endif
if (f2fs_lfs_mode(sbi) && !IS_F2FS_IPU_DISABLE(sbi)) {
err = -EINVAL;
f2fs_warn(sbi, "LFS is not compatible with IPU");
goto restore_opts;
}
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 16:14:49 +03:00
/* disallow enable atgc dynamically */
if (no_atgc == !!test_opt(sbi, ATGC)) {
err = -EINVAL;
f2fs_warn(sbi, "switch atgc option is not allowed");
goto restore_opts;
}
/* disallow enable/disable extent_cache dynamically */
if (no_read_extent_cache == !!test_opt(sbi, READ_EXTENT_CACHE)) {
err = -EINVAL;
f2fs_warn(sbi, "switch extent_cache option is not allowed");
goto restore_opts;
}
f2fs: add block_age-based extent cache This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-02 04:37:15 +03:00
/* disallow enable/disable age extent_cache dynamically */
if (no_age_extent_cache == !!test_opt(sbi, AGE_EXTENT_CACHE)) {
err = -EINVAL;
f2fs_warn(sbi, "switch age_extent_cache option is not allowed");
goto restore_opts;
}
if (no_io_align == !!F2FS_IO_ALIGNED(sbi)) {
err = -EINVAL;
f2fs_warn(sbi, "switch io_bits option is not allowed");
goto restore_opts;
}
if (no_compress_cache == !!test_opt(sbi, COMPRESS_CACHE)) {
err = -EINVAL;
f2fs_warn(sbi, "switch compress_cache option is not allowed");
goto restore_opts;
}
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 03:15:43 +03:00
if (block_unit_discard != f2fs_block_unit_discard(sbi)) {
err = -EINVAL;
f2fs_warn(sbi, "switch discard_unit option is not allowed");
goto restore_opts;
}
if ((*flags & SB_RDONLY) && test_opt(sbi, DISABLE_CHECKPOINT)) {
err = -EINVAL;
f2fs_warn(sbi, "disabling checkpoint not compatible with read-only");
goto restore_opts;
}
/*
* We stop the GC thread if FS is mounted as RO
* or if background_gc = off is passed in mount
* option. Also sync the filesystem.
*/
if ((*flags & SB_RDONLY) ||
(F2FS_OPTION(sbi).bggc_mode == BGGC_MODE_OFF &&
!test_opt(sbi, GC_MERGE))) {
if (sbi->gc_thread) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_stop_gc_thread(sbi);
need_restart_gc = true;
}
} else if (!sbi->gc_thread) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_start_gc_thread(sbi);
if (err)
goto restore_opts;
need_stop_gc = true;
}
if (*flags & SB_RDONLY) {
sync_inodes_sb(sb);
set_sbi_flag(sbi, SBI_IS_DIRTY);
set_sbi_flag(sbi, SBI_IS_CLOSE);
f2fs_sync_fs(sb, 1);
clear_sbi_flag(sbi, SBI_IS_CLOSE);
}
if ((*flags & SB_RDONLY) || test_opt(sbi, DISABLE_CHECKPOINT) ||
!test_opt(sbi, MERGE_CHECKPOINT)) {
f2fs_stop_ckpt_thread(sbi);
need_restart_ckpt = true;
} else {
/* Flush if the prevous checkpoint, if exists. */
f2fs_flush_ckpt_thread(sbi);
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 03:00:42 +03:00
err = f2fs_start_ckpt_thread(sbi);
if (err) {
f2fs_err(sbi,
"Failed to start F2FS issue_checkpoint_thread (%d)",
err);
goto restore_gc;
}
need_stop_ckpt = true;
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 03:00:42 +03:00
}
/*
* We stop issue flush thread if FS is mounted as RO
* or if flush_merge is not passed in mount option.
*/
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 00:05:09 +03:00
if ((*flags & SB_RDONLY) || !test_opt(sbi, FLUSH_MERGE)) {
clear_opt(sbi, FLUSH_MERGE);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_destroy_flush_cmd_control(sbi, false);
need_restart_flush = true;
} else {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_create_flush_cmd_control(sbi);
if (err)
goto restore_ckpt;
need_stop_flush = true;
}
if (no_discard == !!test_opt(sbi, DISCARD)) {
if (test_opt(sbi, DISCARD)) {
err = f2fs_start_discard_thread(sbi);
if (err)
goto restore_flush;
need_stop_discard = true;
} else {
f2fs_stop_discard_thread(sbi);
f2fs_issue_discard_timeout(sbi);
need_restart_discard = true;
}
}
if (enable_checkpoint == !!test_opt(sbi, DISABLE_CHECKPOINT)) {
if (test_opt(sbi, DISABLE_CHECKPOINT)) {
err = f2fs_disable_checkpoint(sbi);
if (err)
goto restore_discard;
} else {
f2fs_enable_checkpoint(sbi);
}
}
skip:
#ifdef CONFIG_QUOTA
/* Release old quota file names */
for (i = 0; i < MAXQUOTAS; i++)
kfree(org_mount_opt.s_qf_names[i]);
#endif
/* Update the POSIXACL Flag */
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 00:05:09 +03:00
sb->s_flags = (sb->s_flags & ~SB_POSIXACL) |
(test_opt(sbi, POSIX_ACL) ? SB_POSIXACL : 0);
limit_reserve_root(sbi);
adjust_unusable_cap_perc(sbi);
*flags = (*flags & ~SB_LAZYTIME) | (sb->s_flags & SB_LAZYTIME);
return 0;
restore_discard:
if (need_restart_discard) {
if (f2fs_start_discard_thread(sbi))
f2fs_warn(sbi, "discard has been stopped");
} else if (need_stop_discard) {
f2fs_stop_discard_thread(sbi);
}
restore_flush:
if (need_restart_flush) {
if (f2fs_create_flush_cmd_control(sbi))
f2fs_warn(sbi, "background flush thread has stopped");
} else if (need_stop_flush) {
clear_opt(sbi, FLUSH_MERGE);
f2fs_destroy_flush_cmd_control(sbi, false);
}
restore_ckpt:
if (need_restart_ckpt) {
if (f2fs_start_ckpt_thread(sbi))
f2fs_warn(sbi, "background ckpt thread has stopped");
} else if (need_stop_ckpt) {
f2fs_stop_ckpt_thread(sbi);
}
restore_gc:
if (need_restart_gc) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
if (f2fs_start_gc_thread(sbi))
f2fs_warn(sbi, "background gc thread has stopped");
} else if (need_stop_gc) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_stop_gc_thread(sbi);
}
restore_opts:
#ifdef CONFIG_QUOTA
F2FS_OPTION(sbi).s_jquota_fmt = org_mount_opt.s_jquota_fmt;
for (i = 0; i < MAXQUOTAS; i++) {
kfree(F2FS_OPTION(sbi).s_qf_names[i]);
F2FS_OPTION(sbi).s_qf_names[i] = org_mount_opt.s_qf_names[i];
}
#endif
sbi->mount_opt = org_mount_opt;
sb->s_flags = old_sb_flags;
return err;
}
#ifdef CONFIG_QUOTA
static bool f2fs_need_recovery(struct f2fs_sb_info *sbi)
{
/* need to recovery orphan */
if (is_set_ckpt_flags(sbi, CP_ORPHAN_PRESENT_FLAG))
return true;
/* need to recovery data */
if (test_opt(sbi, DISABLE_ROLL_FORWARD))
return false;
if (test_opt(sbi, NORECOVERY))
return false;
return !is_set_ckpt_flags(sbi, CP_UMOUNT_FLAG);
}
static bool f2fs_recover_quota_begin(struct f2fs_sb_info *sbi)
{
bool readonly = f2fs_readonly(sbi->sb);
if (!f2fs_need_recovery(sbi))
return false;
/* it doesn't need to check f2fs_sb_has_readonly() */
if (f2fs_hw_is_readonly(sbi))
return false;
if (readonly) {
sbi->sb->s_flags &= ~SB_RDONLY;
set_sbi_flag(sbi, SBI_IS_WRITABLE);
}
/*
* Turn on quotas which were not enabled for read-only mounts if
* filesystem has quota feature, so that they are updated correctly.
*/
return f2fs_enable_quota_files(sbi, readonly);
}
static void f2fs_recover_quota_end(struct f2fs_sb_info *sbi,
bool quota_enabled)
{
if (quota_enabled)
f2fs_quota_off_umount(sbi->sb);
if (is_sbi_flag_set(sbi, SBI_IS_WRITABLE)) {
clear_sbi_flag(sbi, SBI_IS_WRITABLE);
sbi->sb->s_flags |= SB_RDONLY;
}
}
/* Read data from quotafile */
static ssize_t f2fs_quota_read(struct super_block *sb, int type, char *data,
size_t len, loff_t off)
{
struct inode *inode = sb_dqopt(sb)->files[type];
struct address_space *mapping = inode->i_mapping;
block_t blkidx = F2FS_BYTES_TO_BLK(off);
int offset = off & (sb->s_blocksize - 1);
int tocopy;
size_t toread;
loff_t i_size = i_size_read(inode);
struct page *page;
if (off > i_size)
return 0;
if (off + len > i_size)
len = i_size - off;
toread = len;
while (toread > 0) {
tocopy = min_t(unsigned long, sb->s_blocksize - offset, toread);
repeat:
page = read_cache_page_gfp(mapping, blkidx, GFP_NOFS);
if (IS_ERR(page)) {
if (PTR_ERR(page) == -ENOMEM) {
mm: introduce memalloc_retry_wait() Various places in the kernel - largely in filesystems - respond to a memory allocation failure by looping around and re-trying. Some of these cannot conveniently use __GFP_NOFAIL, for reasons such as: - a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on - a need to check for the process being signalled between failures - the possibility that other recovery actions could be performed - the allocation is quite deep in support code, and passing down an extra flag to say if __GFP_NOFAIL is wanted would be clumsy. Many of these currently use congestion_wait() which (in almost all cases) simply waits the given timeout - congestion isn't tracked for most devices. It isn't clear what the best delay is for loops, but it is clear that the various filesystems shouldn't be responsible for choosing a timeout. This patch introduces memalloc_retry_wait() with takes on that responsibility. Code that wants to retry a memory allocation can call this function passing the GFP flags that were used. It will wait however is appropriate. For now, it only considers __GFP_NORETRY and whatever gfpflags_allow_blocking() tests. If blocking is allowed without __GFP_NORETRY, then alloc_page either made some reclaim progress, or waited for a while, before failing. So there is no need for much further waiting. memalloc_retry_wait() will wait until the current jiffie ends. If this condition is not met, then alloc_page() won't have waited much if at all. In that case memalloc_retry_wait() waits about 200ms. This is the delay that most current loops uses. linux/sched/mm.h needs to be included in some files now, but linux/backing-dev.h does not. Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 01:07:14 +03:00
memalloc_retry_wait(GFP_NOFS);
goto repeat;
}
set_sbi_flag(F2FS_SB(sb), SBI_QUOTA_NEED_REPAIR);
return PTR_ERR(page);
}
lock_page(page);
if (unlikely(page->mapping != mapping)) {
f2fs_put_page(page, 1);
goto repeat;
}
if (unlikely(!PageUptodate(page))) {
f2fs_put_page(page, 1);
set_sbi_flag(F2FS_SB(sb), SBI_QUOTA_NEED_REPAIR);
return -EIO;
}
memcpy_from_page(data, page, offset, tocopy);
f2fs_put_page(page, 1);
offset = 0;
toread -= tocopy;
data += tocopy;
blkidx++;
}
return len;
}
/* Write to quotafile */
static ssize_t f2fs_quota_write(struct super_block *sb, int type,
const char *data, size_t len, loff_t off)
{
struct inode *inode = sb_dqopt(sb)->files[type];
struct address_space *mapping = inode->i_mapping;
const struct address_space_operations *a_ops = mapping->a_ops;
int offset = off & (sb->s_blocksize - 1);
size_t towrite = len;
struct page *page;
void *fsdata = NULL;
int err = 0;
int tocopy;
while (towrite > 0) {
tocopy = min_t(unsigned long, sb->s_blocksize - offset,
towrite);
retry:
err = a_ops->write_begin(NULL, mapping, off, tocopy,
&page, &fsdata);
if (unlikely(err)) {
if (err == -ENOMEM) {
f2fs_io_schedule_timeout(DEFAULT_IO_TIMEOUT);
goto retry;
}
set_sbi_flag(F2FS_SB(sb), SBI_QUOTA_NEED_REPAIR);
break;
}
memcpy_to_page(page, offset, data, tocopy);
a_ops->write_end(NULL, mapping, off, tocopy, tocopy,
page, fsdata);
offset = 0;
towrite -= tocopy;
off += tocopy;
data += tocopy;
cond_resched();
}
if (len == towrite)
return err;
inode->i_mtime = inode->i_ctime = current_time(inode);
f2fs_mark_inode_dirty_sync(inode, false);
return len - towrite;
}
int f2fs_dquot_initialize(struct inode *inode)
{
if (time_to_inject(F2FS_I_SB(inode), FAULT_DQUOT_INIT))
return -ESRCH;
return dquot_initialize(inode);
}
static struct dquot **f2fs_get_dquots(struct inode *inode)
{
return F2FS_I(inode)->i_dquot;
}
static qsize_t *f2fs_get_reserved_space(struct inode *inode)
{
return &F2FS_I(inode)->i_reserved_quota;
}
static int f2fs_quota_on_mount(struct f2fs_sb_info *sbi, int type)
{
if (is_set_ckpt_flags(sbi, CP_QUOTA_NEED_FSCK_FLAG)) {
f2fs_err(sbi, "quota sysfile may be corrupted, skip loading it");
return 0;
}
return dquot_quota_on_mount(sbi->sb, F2FS_OPTION(sbi).s_qf_names[type],
F2FS_OPTION(sbi).s_jquota_fmt, type);
}
int f2fs_enable_quota_files(struct f2fs_sb_info *sbi, bool rdonly)
{
int enabled = 0;
int i, err;
if (f2fs_sb_has_quota_ino(sbi) && rdonly) {
err = f2fs_enable_quotas(sbi->sb);
if (err) {
f2fs_err(sbi, "Cannot turn on quota_ino: %d", err);
return 0;
}
return 1;
}
for (i = 0; i < MAXQUOTAS; i++) {
if (F2FS_OPTION(sbi).s_qf_names[i]) {
err = f2fs_quota_on_mount(sbi, i);
if (!err) {
enabled = 1;
continue;
}
f2fs_err(sbi, "Cannot turn on quotas: %d on %d",
err, i);
}
}
return enabled;
}
static int f2fs_quota_enable(struct super_block *sb, int type, int format_id,
unsigned int flags)
{
struct inode *qf_inode;
unsigned long qf_inum;
unsigned long qf_flag = F2FS_QUOTA_DEFAULT_FL;
int err;
BUG_ON(!f2fs_sb_has_quota_ino(F2FS_SB(sb)));
qf_inum = f2fs_qf_ino(sb, type);
if (!qf_inum)
return -EPERM;
qf_inode = f2fs_iget(sb, qf_inum);
if (IS_ERR(qf_inode)) {
f2fs_err(F2FS_SB(sb), "Bad quota inode %u:%lu", type, qf_inum);
return PTR_ERR(qf_inode);
}
/* Don't account quota for quota files to avoid recursion */
inode_lock(qf_inode);
qf_inode->i_flags |= S_NOQUOTA;
if ((F2FS_I(qf_inode)->i_flags & qf_flag) != qf_flag) {
F2FS_I(qf_inode)->i_flags |= qf_flag;
f2fs_set_inode_flags(qf_inode);
}
inode_unlock(qf_inode);
err = dquot_load_quota_inode(qf_inode, type, format_id, flags);
iput(qf_inode);
return err;
}
static int f2fs_enable_quotas(struct super_block *sb)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
int type, err = 0;
unsigned long qf_inum;
bool quota_mopt[MAXQUOTAS] = {
test_opt(sbi, USRQUOTA),
test_opt(sbi, GRPQUOTA),
test_opt(sbi, PRJQUOTA),
};
if (is_set_ckpt_flags(F2FS_SB(sb), CP_QUOTA_NEED_FSCK_FLAG)) {
f2fs_err(sbi, "quota file may be corrupted, skip loading it");
return 0;
}
sb_dqopt(sb)->flags |= DQUOT_QUOTA_SYS_FILE;
for (type = 0; type < MAXQUOTAS; type++) {
qf_inum = f2fs_qf_ino(sb, type);
if (qf_inum) {
err = f2fs_quota_enable(sb, type, QFMT_VFS_V1,
DQUOT_USAGE_ENABLED |
(quota_mopt[type] ? DQUOT_LIMITS_ENABLED : 0));
if (err) {
f2fs_err(sbi, "Failed to enable quota tracking (type=%d, err=%d). Please run fsck to fix.",
type, err);
for (type--; type >= 0; type--)
dquot_quota_off(sb, type);
set_sbi_flag(F2FS_SB(sb),
SBI_QUOTA_NEED_REPAIR);
return err;
}
}
}
return 0;
}
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 11:46:47 +03:00
static int f2fs_quota_sync_file(struct f2fs_sb_info *sbi, int type)
{
struct quota_info *dqopt = sb_dqopt(sbi->sb);
struct address_space *mapping = dqopt->files[type]->i_mapping;
int ret = 0;
ret = dquot_writeback_dquots(sbi->sb, type);
if (ret)
goto out;
ret = filemap_fdatawrite(mapping);
if (ret)
goto out;
/* if we are using journalled quota */
if (is_journalled_quota(sbi))
goto out;
ret = filemap_fdatawait(mapping);
truncate_inode_pages(&dqopt->files[type]->i_data, 0);
out:
if (ret)
set_sbi_flag(sbi, SBI_QUOTA_NEED_REPAIR);
return ret;
}
int f2fs_quota_sync(struct super_block *sb, int type)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
struct quota_info *dqopt = sb_dqopt(sb);
int cnt;
f2fs: quota: fix loop condition at f2fs_quota_sync() cnt should be passed to sb_has_quota_active() instead of type to check active quota properly. Moreover, when the type is -1, the compiler with enough inline knowledge can discard sb_has_quota_active() check altogether, causing a NULL pointer dereference at the following inode_lock(dqopt->files[cnt]): [ 2.796010] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 2.796024] Mem abort info: [ 2.796025] ESR = 0x96000005 [ 2.796028] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.796029] SET = 0, FnV = 0 [ 2.796031] EA = 0, S1PTW = 0 [ 2.796032] Data abort info: [ 2.796034] ISV = 0, ISS = 0x00000005 [ 2.796035] CM = 0, WnR = 0 [ 2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=00000003370d1000 [ 2.796048] [00000000000000a0] pgd=0000000000000000, pud=0000000000000000 [ 2.796051] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S 5.4.179-arter97-r8-64666-g2f16e087f9d8 #1 [ 2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT) [ 2.796059] pstate: 80c00005 (Nzcv daif +PAN +UAO) [ 2.796065] pc : down_write+0x28/0x70 [ 2.796070] lr : f2fs_quota_sync+0x100/0x294 [ 2.796071] sp : ffffffa3f48ffc30 [ 2.796073] x29: ffffffa3f48ffc30 x28: 0000000000000000 [ 2.796075] x27: ffffffa3f6d718b8 x26: ffffffa415fe9d80 [ 2.796077] x25: ffffffa3f7290048 x24: 0000000000000001 [ 2.796078] x23: 0000000000000000 x22: ffffffa3f7290000 [ 2.796080] x21: ffffffa3f72904a0 x20: ffffffa3f7290110 [ 2.796081] x19: ffffffa3f77a9800 x18: ffffffc020aae038 [ 2.796083] x17: ffffffa40e38e040 x16: ffffffa40e38e6d0 [ 2.796085] x15: ffffffa40e38e6cc x14: ffffffa40e38e6d0 [ 2.796086] x13: 00000000000004f6 x12: 00162c44ff493000 [ 2.796088] x11: 0000000000000400 x10: ffffffa40e38c948 [ 2.796090] x9 : 0000000000000000 x8 : 00000000000000a0 [ 2.796091] x7 : 0000000000000000 x6 : 0000d1060f00002a [ 2.796093] x5 : ffffffa3f48ff718 x4 : 000000000000000d [ 2.796094] x3 : 00000000060c0000 x2 : 0000000000000001 [ 2.796096] x1 : 0000000000000000 x0 : 00000000000000a0 [ 2.796098] Call trace: [ 2.796100] down_write+0x28/0x70 [ 2.796102] f2fs_quota_sync+0x100/0x294 [ 2.796104] block_operations+0x120/0x204 [ 2.796106] f2fs_write_checkpoint+0x11c/0x520 [ 2.796107] __checkpoint_and_complete_reqs+0x7c/0xd34 [ 2.796109] issue_checkpoint_thread+0x6c/0xb8 [ 2.796112] kthread+0x138/0x414 [ 2.796114] ret_from_fork+0x10/0x18 [ 2.796117] Code: aa0803e0 aa1f03e1 52800022 aa0103e9 (c8e97d02) [ 2.796120] ---[ end trace 96e942e8eb6a0b53 ]--- [ 2.800116] Kernel panic - not syncing: Fatal exception [ 2.800120] SMP: stopping secondary CPUs Fixes: 9de71ede81e6 ("f2fs: quota: fix potential deadlock") Cc: <stable@vger.kernel.org> # v5.15+ Signed-off-by: Juhyung Park <qkrwngud825@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-02-15 11:27:21 +03:00
int ret = 0;
/*
* Now when everything is written we can discard the pagecache so
* that userspace sees the changes.
*/
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
if (type != -1 && cnt != type)
continue;
f2fs: quota: fix loop condition at f2fs_quota_sync() cnt should be passed to sb_has_quota_active() instead of type to check active quota properly. Moreover, when the type is -1, the compiler with enough inline knowledge can discard sb_has_quota_active() check altogether, causing a NULL pointer dereference at the following inode_lock(dqopt->files[cnt]): [ 2.796010] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 2.796024] Mem abort info: [ 2.796025] ESR = 0x96000005 [ 2.796028] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.796029] SET = 0, FnV = 0 [ 2.796031] EA = 0, S1PTW = 0 [ 2.796032] Data abort info: [ 2.796034] ISV = 0, ISS = 0x00000005 [ 2.796035] CM = 0, WnR = 0 [ 2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=00000003370d1000 [ 2.796048] [00000000000000a0] pgd=0000000000000000, pud=0000000000000000 [ 2.796051] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S 5.4.179-arter97-r8-64666-g2f16e087f9d8 #1 [ 2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT) [ 2.796059] pstate: 80c00005 (Nzcv daif +PAN +UAO) [ 2.796065] pc : down_write+0x28/0x70 [ 2.796070] lr : f2fs_quota_sync+0x100/0x294 [ 2.796071] sp : ffffffa3f48ffc30 [ 2.796073] x29: ffffffa3f48ffc30 x28: 0000000000000000 [ 2.796075] x27: ffffffa3f6d718b8 x26: ffffffa415fe9d80 [ 2.796077] x25: ffffffa3f7290048 x24: 0000000000000001 [ 2.796078] x23: 0000000000000000 x22: ffffffa3f7290000 [ 2.796080] x21: ffffffa3f72904a0 x20: ffffffa3f7290110 [ 2.796081] x19: ffffffa3f77a9800 x18: ffffffc020aae038 [ 2.796083] x17: ffffffa40e38e040 x16: ffffffa40e38e6d0 [ 2.796085] x15: ffffffa40e38e6cc x14: ffffffa40e38e6d0 [ 2.796086] x13: 00000000000004f6 x12: 00162c44ff493000 [ 2.796088] x11: 0000000000000400 x10: ffffffa40e38c948 [ 2.796090] x9 : 0000000000000000 x8 : 00000000000000a0 [ 2.796091] x7 : 0000000000000000 x6 : 0000d1060f00002a [ 2.796093] x5 : ffffffa3f48ff718 x4 : 000000000000000d [ 2.796094] x3 : 00000000060c0000 x2 : 0000000000000001 [ 2.796096] x1 : 0000000000000000 x0 : 00000000000000a0 [ 2.796098] Call trace: [ 2.796100] down_write+0x28/0x70 [ 2.796102] f2fs_quota_sync+0x100/0x294 [ 2.796104] block_operations+0x120/0x204 [ 2.796106] f2fs_write_checkpoint+0x11c/0x520 [ 2.796107] __checkpoint_and_complete_reqs+0x7c/0xd34 [ 2.796109] issue_checkpoint_thread+0x6c/0xb8 [ 2.796112] kthread+0x138/0x414 [ 2.796114] ret_from_fork+0x10/0x18 [ 2.796117] Code: aa0803e0 aa1f03e1 52800022 aa0103e9 (c8e97d02) [ 2.796120] ---[ end trace 96e942e8eb6a0b53 ]--- [ 2.800116] Kernel panic - not syncing: Fatal exception [ 2.800120] SMP: stopping secondary CPUs Fixes: 9de71ede81e6 ("f2fs: quota: fix potential deadlock") Cc: <stable@vger.kernel.org> # v5.15+ Signed-off-by: Juhyung Park <qkrwngud825@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-02-15 11:27:21 +03:00
if (!sb_has_quota_active(sb, cnt))
continue;
f2fs: don't need inode lock for system hidden quota Let's avoid false-alarmed lockdep warning. [ 58.914674] [T1501146] -> #2 (&sb->s_type->i_mutex_key#20){+.+.}-{3:3}: [ 58.915975] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.916738] [T1501146] system_server: f2fs_quota_sync+0x60/0x1a8 [ 58.917563] [T1501146] system_server: block_operations+0x16c/0x43c [ 58.918410] [T1501146] system_server: f2fs_write_checkpoint+0x114/0x318 [ 58.919312] [T1501146] system_server: f2fs_issue_checkpoint+0x178/0x21c [ 58.920214] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.920999] [T1501146] system_server: f2fs_do_sync_file+0x334/0x738 [ 58.921862] [T1501146] system_server: f2fs_sync_file+0x30/0x48 [ 58.922667] [T1501146] system_server: __arm64_sys_fsync+0x84/0xf8 [ 58.923506] [T1501146] system_server: el0_svc_common.llvm.12821150825140585682+0xd8/0x20c [ 58.924604] [T1501146] system_server: do_el0_svc+0x28/0xa0 [ 58.925366] [T1501146] system_server: el0_svc+0x24/0x38 [ 58.926094] [T1501146] system_server: el0_sync_handler+0x88/0xec [ 58.926920] [T1501146] system_server: el0_sync+0x1b4/0x1c0 [ 58.927681] [T1501146] -> #1 (&sbi->cp_global_sem){+.+.}-{3:3}: [ 58.928889] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.929650] [T1501146] system_server: f2fs_write_checkpoint+0xbc/0x318 [ 58.930541] [T1501146] system_server: f2fs_issue_checkpoint+0x178/0x21c [ 58.931443] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.932226] [T1501146] system_server: sync_filesystem+0xac/0x130 [ 58.933053] [T1501146] system_server: generic_shutdown_super+0x38/0x150 [ 58.933958] [T1501146] system_server: kill_block_super+0x24/0x58 [ 58.934791] [T1501146] system_server: kill_f2fs_super+0xcc/0x124 [ 58.935618] [T1501146] system_server: deactivate_locked_super+0x90/0x120 [ 58.936529] [T1501146] system_server: deactivate_super+0x74/0xac [ 58.937356] [T1501146] system_server: cleanup_mnt+0x128/0x168 [ 58.938150] [T1501146] system_server: __cleanup_mnt+0x18/0x28 [ 58.938944] [T1501146] system_server: task_work_run+0xb8/0x14c [ 58.939749] [T1501146] system_server: do_notify_resume+0x114/0x1e8 [ 58.940595] [T1501146] system_server: work_pending+0xc/0x5f0 [ 58.941375] [T1501146] -> #0 (&sbi->gc_lock){+.+.}-{3:3}: [ 58.942519] [T1501146] system_server: __lock_acquire+0x1270/0x2868 [ 58.943366] [T1501146] system_server: lock_acquire+0x114/0x294 [ 58.944169] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.944930] [T1501146] system_server: f2fs_issue_checkpoint+0x13c/0x21c [ 58.945831] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.946614] [T1501146] system_server: f2fs_do_sync_file+0x334/0x738 [ 58.947472] [T1501146] system_server: f2fs_ioc_commit_atomic_write+0xc8/0x14c [ 58.948439] [T1501146] system_server: __f2fs_ioctl+0x674/0x154c [ 58.949253] [T1501146] system_server: f2fs_ioctl+0x54/0x88 [ 58.950018] [T1501146] system_server: __arm64_sys_ioctl+0xa8/0x110 [ 58.950865] [T1501146] system_server: el0_svc_common.llvm.12821150825140585682+0xd8/0x20c [ 58.951965] [T1501146] system_server: do_el0_svc+0x28/0xa0 [ 58.952727] [T1501146] system_server: el0_svc+0x24/0x38 [ 58.953454] [T1501146] system_server: el0_sync_handler+0x88/0xec [ 58.954279] [T1501146] system_server: el0_sync+0x1b4/0x1c0 Cc: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-05-06 03:40:25 +03:00
if (!f2fs_sb_has_quota_ino(sbi))
inode_lock(dqopt->files[cnt]);
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 11:46:47 +03:00
/*
* do_quotactl
* f2fs_quota_sync
* f2fs_down_read(quota_sem)
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 11:46:47 +03:00
* dquot_writeback_dquots()
* f2fs_dquot_commit
* block_operation
* f2fs_down_read(quota_sem)
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 11:46:47 +03:00
*/
f2fs_lock_op(sbi);
f2fs_down_read(&sbi->quota_sem);
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 11:46:47 +03:00
ret = f2fs_quota_sync_file(sbi, cnt);
f2fs_up_read(&sbi->quota_sem);
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 11:46:47 +03:00
f2fs_unlock_op(sbi);
f2fs: don't need inode lock for system hidden quota Let's avoid false-alarmed lockdep warning. [ 58.914674] [T1501146] -> #2 (&sb->s_type->i_mutex_key#20){+.+.}-{3:3}: [ 58.915975] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.916738] [T1501146] system_server: f2fs_quota_sync+0x60/0x1a8 [ 58.917563] [T1501146] system_server: block_operations+0x16c/0x43c [ 58.918410] [T1501146] system_server: f2fs_write_checkpoint+0x114/0x318 [ 58.919312] [T1501146] system_server: f2fs_issue_checkpoint+0x178/0x21c [ 58.920214] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.920999] [T1501146] system_server: f2fs_do_sync_file+0x334/0x738 [ 58.921862] [T1501146] system_server: f2fs_sync_file+0x30/0x48 [ 58.922667] [T1501146] system_server: __arm64_sys_fsync+0x84/0xf8 [ 58.923506] [T1501146] system_server: el0_svc_common.llvm.12821150825140585682+0xd8/0x20c [ 58.924604] [T1501146] system_server: do_el0_svc+0x28/0xa0 [ 58.925366] [T1501146] system_server: el0_svc+0x24/0x38 [ 58.926094] [T1501146] system_server: el0_sync_handler+0x88/0xec [ 58.926920] [T1501146] system_server: el0_sync+0x1b4/0x1c0 [ 58.927681] [T1501146] -> #1 (&sbi->cp_global_sem){+.+.}-{3:3}: [ 58.928889] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.929650] [T1501146] system_server: f2fs_write_checkpoint+0xbc/0x318 [ 58.930541] [T1501146] system_server: f2fs_issue_checkpoint+0x178/0x21c [ 58.931443] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.932226] [T1501146] system_server: sync_filesystem+0xac/0x130 [ 58.933053] [T1501146] system_server: generic_shutdown_super+0x38/0x150 [ 58.933958] [T1501146] system_server: kill_block_super+0x24/0x58 [ 58.934791] [T1501146] system_server: kill_f2fs_super+0xcc/0x124 [ 58.935618] [T1501146] system_server: deactivate_locked_super+0x90/0x120 [ 58.936529] [T1501146] system_server: deactivate_super+0x74/0xac [ 58.937356] [T1501146] system_server: cleanup_mnt+0x128/0x168 [ 58.938150] [T1501146] system_server: __cleanup_mnt+0x18/0x28 [ 58.938944] [T1501146] system_server: task_work_run+0xb8/0x14c [ 58.939749] [T1501146] system_server: do_notify_resume+0x114/0x1e8 [ 58.940595] [T1501146] system_server: work_pending+0xc/0x5f0 [ 58.941375] [T1501146] -> #0 (&sbi->gc_lock){+.+.}-{3:3}: [ 58.942519] [T1501146] system_server: __lock_acquire+0x1270/0x2868 [ 58.943366] [T1501146] system_server: lock_acquire+0x114/0x294 [ 58.944169] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.944930] [T1501146] system_server: f2fs_issue_checkpoint+0x13c/0x21c [ 58.945831] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.946614] [T1501146] system_server: f2fs_do_sync_file+0x334/0x738 [ 58.947472] [T1501146] system_server: f2fs_ioc_commit_atomic_write+0xc8/0x14c [ 58.948439] [T1501146] system_server: __f2fs_ioctl+0x674/0x154c [ 58.949253] [T1501146] system_server: f2fs_ioctl+0x54/0x88 [ 58.950018] [T1501146] system_server: __arm64_sys_ioctl+0xa8/0x110 [ 58.950865] [T1501146] system_server: el0_svc_common.llvm.12821150825140585682+0xd8/0x20c [ 58.951965] [T1501146] system_server: do_el0_svc+0x28/0xa0 [ 58.952727] [T1501146] system_server: el0_svc+0x24/0x38 [ 58.953454] [T1501146] system_server: el0_sync_handler+0x88/0xec [ 58.954279] [T1501146] system_server: el0_sync+0x1b4/0x1c0 Cc: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-05-06 03:40:25 +03:00
if (!f2fs_sb_has_quota_ino(sbi))
inode_unlock(dqopt->files[cnt]);
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 11:46:47 +03:00
if (ret)
break;
}
return ret;
}
static int f2fs_quota_on(struct super_block *sb, int type, int format_id,
const struct path *path)
{
struct inode *inode;
int err;
/* if quota sysfile exists, deny enabling quota with specific file */
if (f2fs_sb_has_quota_ino(F2FS_SB(sb))) {
f2fs_err(F2FS_SB(sb), "quota sysfile already exists");
return -EBUSY;
}
if (path->dentry->d_sb != sb)
return -EXDEV;
err = f2fs_quota_sync(sb, type);
if (err)
return err;
inode = d_inode(path->dentry);
err = filemap_fdatawrite(inode->i_mapping);
if (err)
return err;
err = filemap_fdatawait(inode->i_mapping);
if (err)
return err;
err = dquot_quota_on(sb, type, format_id, path);
if (err)
return err;
inode_lock(inode);
F2FS_I(inode)->i_flags |= F2FS_QUOTA_DEFAULT_FL;
f2fs_set_inode_flags(inode);
inode_unlock(inode);
f2fs_mark_inode_dirty_sync(inode, false);
return 0;
}
static int __f2fs_quota_off(struct super_block *sb, int type)
{
struct inode *inode = sb_dqopt(sb)->files[type];
int err;
if (!inode || !igrab(inode))
return dquot_quota_off(sb, type);
f2fs: report error if quota off error during umount Now, we depend on fsck to ensure quota file data is ok, so we scan whole partition if checkpoint without umount flag. It's same for quota off error case, which may make quota file data inconsistent. generic/019 reports below error: __quota_error: 1160 callbacks suppressed Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds. Have a nice day... If we failed in below path due to fail to write dquot block, we will miss to release quota inode, fix it. - f2fs_put_super - f2fs_quota_off_umount - f2fs_quota_off - f2fs_quota_sync <-- failed - dquot_quota_off <-- missed to call Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-26 08:12:43 +03:00
err = f2fs_quota_sync(sb, type);
if (err)
goto out_put;
err = dquot_quota_off(sb, type);
if (err || f2fs_sb_has_quota_ino(F2FS_SB(sb)))
goto out_put;
inode_lock(inode);
F2FS_I(inode)->i_flags &= ~F2FS_QUOTA_DEFAULT_FL;
f2fs_set_inode_flags(inode);
inode_unlock(inode);
f2fs_mark_inode_dirty_sync(inode, false);
out_put:
iput(inode);
return err;
}
static int f2fs_quota_off(struct super_block *sb, int type)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
int err;
err = __f2fs_quota_off(sb, type);
/*
* quotactl can shutdown journalled quota, result in inconsistence
* between quota record and fs data by following updates, tag the
* flag to let fsck be aware of it.
*/
if (is_journalled_quota(sbi))
set_sbi_flag(sbi, SBI_QUOTA_NEED_REPAIR);
return err;
}
void f2fs_quota_off_umount(struct super_block *sb)
{
int type;
f2fs: report error if quota off error during umount Now, we depend on fsck to ensure quota file data is ok, so we scan whole partition if checkpoint without umount flag. It's same for quota off error case, which may make quota file data inconsistent. generic/019 reports below error: __quota_error: 1160 callbacks suppressed Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds. Have a nice day... If we failed in below path due to fail to write dquot block, we will miss to release quota inode, fix it. - f2fs_put_super - f2fs_quota_off_umount - f2fs_quota_off - f2fs_quota_sync <-- failed - dquot_quota_off <-- missed to call Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-26 08:12:43 +03:00
int err;
for (type = 0; type < MAXQUOTAS; type++) {
err = __f2fs_quota_off(sb, type);
f2fs: report error if quota off error during umount Now, we depend on fsck to ensure quota file data is ok, so we scan whole partition if checkpoint without umount flag. It's same for quota off error case, which may make quota file data inconsistent. generic/019 reports below error: __quota_error: 1160 callbacks suppressed Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds. Have a nice day... If we failed in below path due to fail to write dquot block, we will miss to release quota inode, fix it. - f2fs_put_super - f2fs_quota_off_umount - f2fs_quota_off - f2fs_quota_sync <-- failed - dquot_quota_off <-- missed to call Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-26 08:12:43 +03:00
if (err) {
int ret = dquot_quota_off(sb, type);
f2fs_err(F2FS_SB(sb), "Fail to turn off disk quota (type: %d, err: %d, ret:%d), Please run fsck to fix it.",
type, err, ret);
set_sbi_flag(F2FS_SB(sb), SBI_QUOTA_NEED_REPAIR);
f2fs: report error if quota off error during umount Now, we depend on fsck to ensure quota file data is ok, so we scan whole partition if checkpoint without umount flag. It's same for quota off error case, which may make quota file data inconsistent. generic/019 reports below error: __quota_error: 1160 callbacks suppressed Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds. Have a nice day... If we failed in below path due to fail to write dquot block, we will miss to release quota inode, fix it. - f2fs_put_super - f2fs_quota_off_umount - f2fs_quota_off - f2fs_quota_sync <-- failed - dquot_quota_off <-- missed to call Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-26 08:12:43 +03:00
}
}
/*
* In case of checkpoint=disable, we must flush quota blocks.
* This can cause NULL exception for node_inode in end_io, since
* put_super already dropped it.
*/
sync_filesystem(sb);
}
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 13:49:26 +03:00
static void f2fs_truncate_quota_inode_pages(struct super_block *sb)
{
struct quota_info *dqopt = sb_dqopt(sb);
int type;
for (type = 0; type < MAXQUOTAS; type++) {
if (!dqopt->files[type])
continue;
f2fs_inode_synced(dqopt->files[type]);
}
}
static int f2fs_dquot_commit(struct dquot *dquot)
{
struct f2fs_sb_info *sbi = F2FS_SB(dquot->dq_sb);
int ret;
f2fs_down_read_nested(&sbi->quota_sem, SINGLE_DEPTH_NESTING);
ret = dquot_commit(dquot);
if (ret < 0)
set_sbi_flag(sbi, SBI_QUOTA_NEED_REPAIR);
f2fs_up_read(&sbi->quota_sem);
return ret;
}
static int f2fs_dquot_acquire(struct dquot *dquot)
{
struct f2fs_sb_info *sbi = F2FS_SB(dquot->dq_sb);
int ret;
f2fs_down_read(&sbi->quota_sem);
ret = dquot_acquire(dquot);
if (ret < 0)
set_sbi_flag(sbi, SBI_QUOTA_NEED_REPAIR);
f2fs_up_read(&sbi->quota_sem);
return ret;
}
static int f2fs_dquot_release(struct dquot *dquot)
{
struct f2fs_sb_info *sbi = F2FS_SB(dquot->dq_sb);
int ret = dquot_release(dquot);
if (ret < 0)
set_sbi_flag(sbi, SBI_QUOTA_NEED_REPAIR);
return ret;
}
static int f2fs_dquot_mark_dquot_dirty(struct dquot *dquot)
{
struct super_block *sb = dquot->dq_sb;
struct f2fs_sb_info *sbi = F2FS_SB(sb);
int ret = dquot_mark_dquot_dirty(dquot);
/* if we are using journalled quota */
if (is_journalled_quota(sbi))
set_sbi_flag(sbi, SBI_QUOTA_NEED_FLUSH);
return ret;
}
static int f2fs_dquot_commit_info(struct super_block *sb, int type)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
int ret = dquot_commit_info(sb, type);
if (ret < 0)
set_sbi_flag(sbi, SBI_QUOTA_NEED_REPAIR);
return ret;
}
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 13:49:26 +03:00
static int f2fs_get_projid(struct inode *inode, kprojid_t *projid)
{
*projid = F2FS_I(inode)->i_projid;
return 0;
}
static const struct dquot_operations f2fs_quota_operations = {
.get_reserved_space = f2fs_get_reserved_space,
.write_dquot = f2fs_dquot_commit,
.acquire_dquot = f2fs_dquot_acquire,
.release_dquot = f2fs_dquot_release,
.mark_dirty = f2fs_dquot_mark_dquot_dirty,
.write_info = f2fs_dquot_commit_info,
.alloc_dquot = dquot_alloc,
.destroy_dquot = dquot_destroy,
.get_projid = f2fs_get_projid,
.get_next_id = dquot_get_next_id,
};
static const struct quotactl_ops f2fs_quotactl_ops = {
.quota_on = f2fs_quota_on,
.quota_off = f2fs_quota_off,
.quota_sync = f2fs_quota_sync,
.get_state = dquot_get_state,
.set_info = dquot_set_dqinfo,
.get_dqblk = dquot_get_dqblk,
.set_dqblk = dquot_set_dqblk,
.get_nextdqblk = dquot_get_next_dqblk,
};
#else
int f2fs_dquot_initialize(struct inode *inode)
{
return 0;
}
int f2fs_quota_sync(struct super_block *sb, int type)
{
return 0;
}
void f2fs_quota_off_umount(struct super_block *sb)
{
}
#endif
static const struct super_operations f2fs_sops = {
.alloc_inode = f2fs_alloc_inode,
.free_inode = f2fs_free_inode,
.drop_inode = f2fs_drop_inode,
.write_inode = f2fs_write_inode,
.dirty_inode = f2fs_dirty_inode,
.show_options = f2fs_show_options,
#ifdef CONFIG_QUOTA
.quota_read = f2fs_quota_read,
.quota_write = f2fs_quota_write,
.get_dquots = f2fs_get_dquots,
#endif
.evict_inode = f2fs_evict_inode,
.put_super = f2fs_put_super,
.sync_fs = f2fs_sync_fs,
.freeze_fs = f2fs_freeze,
.unfreeze_fs = f2fs_unfreeze,
.statfs = f2fs_statfs,
.remount_fs = f2fs_remount,
};
#ifdef CONFIG_FS_ENCRYPTION
static int f2fs_get_context(struct inode *inode, void *ctx, size_t len)
{
return f2fs_getxattr(inode, F2FS_XATTR_INDEX_ENCRYPTION,
F2FS_XATTR_NAME_ENCRYPTION_CONTEXT,
ctx, len, NULL);
}
static int f2fs_set_context(struct inode *inode, const void *ctx, size_t len,
void *fs_data)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
/*
* Encrypting the root directory is not allowed because fsck
* expects lost+found directory to exist and remain unencrypted
* if LOST_FOUND feature is enabled.
*
*/
if (f2fs_sb_has_lost_found(sbi) &&
inode->i_ino == F2FS_ROOT_INO(sbi))
return -EPERM;
return f2fs_setxattr(inode, F2FS_XATTR_INDEX_ENCRYPTION,
F2FS_XATTR_NAME_ENCRYPTION_CONTEXT,
ctx, len, fs_data, XATTR_CREATE);
}
fscrypt: handle test_dummy_encryption in more logical way The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-17 07:11:35 +03:00
static const union fscrypt_policy *f2fs_get_dummy_policy(struct super_block *sb)
{
fscrypt: handle test_dummy_encryption in more logical way The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-17 07:11:35 +03:00
return F2FS_OPTION(F2FS_SB(sb)).dummy_enc_policy.policy;
}
static bool f2fs_has_stable_inodes(struct super_block *sb)
{
return true;
}
static void f2fs_get_ino_and_lblk_bits(struct super_block *sb,
int *ino_bits_ret, int *lblk_bits_ret)
{
*ino_bits_ret = 8 * sizeof(nid_t);
*lblk_bits_ret = 8 * sizeof(block_t);
}
static struct block_device **f2fs_get_devices(struct super_block *sb,
unsigned int *num_devs)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
struct block_device **devs;
int i;
if (!f2fs_is_multi_device(sbi))
return NULL;
devs = kmalloc_array(sbi->s_ndevs, sizeof(*devs), GFP_KERNEL);
if (!devs)
return ERR_PTR(-ENOMEM);
for (i = 0; i < sbi->s_ndevs; i++)
devs[i] = FDEV(i).bdev;
*num_devs = sbi->s_ndevs;
return devs;
}
static const struct fscrypt_operations f2fs_cryptops = {
.key_prefix = "f2fs:",
.get_context = f2fs_get_context,
.set_context = f2fs_set_context,
fscrypt: handle test_dummy_encryption in more logical way The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-17 07:11:35 +03:00
.get_dummy_policy = f2fs_get_dummy_policy,
.empty_dir = f2fs_empty_dir,
.has_stable_inodes = f2fs_has_stable_inodes,
.get_ino_and_lblk_bits = f2fs_get_ino_and_lblk_bits,
.get_devices = f2fs_get_devices,
};
#endif
static struct inode *f2fs_nfs_get_inode(struct super_block *sb,
u64 ino, u32 generation)
{
struct f2fs_sb_info *sbi = F2FS_SB(sb);
struct inode *inode;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
if (f2fs_check_nid_range(sbi, ino))
return ERR_PTR(-ESTALE);
/*
* f2fs_iget isn't quite right if the inode is currently unallocated!
* However f2fs_iget currently does appropriate checks to handle stale
* inodes so everything is OK.
*/
inode = f2fs_iget(sb, ino);
if (IS_ERR(inode))
return ERR_CAST(inode);
if (unlikely(generation && inode->i_generation != generation)) {
/* we didn't find the right inode.. */
iput(inode);
return ERR_PTR(-ESTALE);
}
return inode;
}
static struct dentry *f2fs_fh_to_dentry(struct super_block *sb, struct fid *fid,
int fh_len, int fh_type)
{
return generic_fh_to_dentry(sb, fid, fh_len, fh_type,
f2fs_nfs_get_inode);
}
static struct dentry *f2fs_fh_to_parent(struct super_block *sb, struct fid *fid,
int fh_len, int fh_type)
{
return generic_fh_to_parent(sb, fid, fh_len, fh_type,
f2fs_nfs_get_inode);
}
static const struct export_operations f2fs_export_ops = {
.fh_to_dentry = f2fs_fh_to_dentry,
.fh_to_parent = f2fs_fh_to_parent,
.get_parent = f2fs_get_parent,
};
loff_t max_file_blocks(struct inode *inode)
{
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-18 19:19:06 +03:00
loff_t result = 0;
loff_t leaf_count;
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-18 19:19:06 +03:00
/*
* note: previously, result is equal to (DEF_ADDRS_PER_INODE -
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
* DEFAULT_INLINE_XATTR_ADDRS), but now f2fs try to reserve more
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-18 19:19:06 +03:00
* space in inode.i_addr, it will be more safe to reassign
* result as zero.
*/
if (inode && f2fs_compressed_file(inode))
leaf_count = ADDRS_PER_BLOCK(inode);
else
leaf_count = DEF_ADDRS_PER_BLOCK;
/* two direct node blocks */
result += (leaf_count * 2);
/* two indirect node blocks */
leaf_count *= NIDS_PER_BLOCK;
result += (leaf_count * 2);
/* one double indirect node block */
leaf_count *= NIDS_PER_BLOCK;
result += leaf_count;
return result;
}
static int __f2fs_commit_super(struct buffer_head *bh,
struct f2fs_super_block *super)
{
lock_buffer(bh);
if (super)
memcpy(bh->b_data + F2FS_SUPER_OFFSET, super, sizeof(*super));
set_buffer_dirty(bh);
unlock_buffer(bh);
/* it's rare case, we can do fua all the time */
return __sync_dirty_buffer(bh, REQ_SYNC | REQ_PREFLUSH | REQ_FUA);
}
static inline bool sanity_check_area_boundary(struct f2fs_sb_info *sbi,
struct buffer_head *bh)
{
struct f2fs_super_block *raw_super = (struct f2fs_super_block *)
(bh->b_data + F2FS_SUPER_OFFSET);
struct super_block *sb = sbi->sb;
u32 segment0_blkaddr = le32_to_cpu(raw_super->segment0_blkaddr);
u32 cp_blkaddr = le32_to_cpu(raw_super->cp_blkaddr);
u32 sit_blkaddr = le32_to_cpu(raw_super->sit_blkaddr);
u32 nat_blkaddr = le32_to_cpu(raw_super->nat_blkaddr);
u32 ssa_blkaddr = le32_to_cpu(raw_super->ssa_blkaddr);
u32 main_blkaddr = le32_to_cpu(raw_super->main_blkaddr);
u32 segment_count_ckpt = le32_to_cpu(raw_super->segment_count_ckpt);
u32 segment_count_sit = le32_to_cpu(raw_super->segment_count_sit);
u32 segment_count_nat = le32_to_cpu(raw_super->segment_count_nat);
u32 segment_count_ssa = le32_to_cpu(raw_super->segment_count_ssa);
u32 segment_count_main = le32_to_cpu(raw_super->segment_count_main);
u32 segment_count = le32_to_cpu(raw_super->segment_count);
u32 log_blocks_per_seg = le32_to_cpu(raw_super->log_blocks_per_seg);
u64 main_end_blkaddr = main_blkaddr +
(segment_count_main << log_blocks_per_seg);
u64 seg_end_blkaddr = segment0_blkaddr +
(segment_count << log_blocks_per_seg);
if (segment0_blkaddr != cp_blkaddr) {
f2fs_info(sbi, "Mismatch start address, segment0(%u) cp_blkaddr(%u)",
segment0_blkaddr, cp_blkaddr);
return true;
}
if (cp_blkaddr + (segment_count_ckpt << log_blocks_per_seg) !=
sit_blkaddr) {
f2fs_info(sbi, "Wrong CP boundary, start(%u) end(%u) blocks(%u)",
cp_blkaddr, sit_blkaddr,
segment_count_ckpt << log_blocks_per_seg);
return true;
}
if (sit_blkaddr + (segment_count_sit << log_blocks_per_seg) !=
nat_blkaddr) {
f2fs_info(sbi, "Wrong SIT boundary, start(%u) end(%u) blocks(%u)",
sit_blkaddr, nat_blkaddr,
segment_count_sit << log_blocks_per_seg);
return true;
}
if (nat_blkaddr + (segment_count_nat << log_blocks_per_seg) !=
ssa_blkaddr) {
f2fs_info(sbi, "Wrong NAT boundary, start(%u) end(%u) blocks(%u)",
nat_blkaddr, ssa_blkaddr,
segment_count_nat << log_blocks_per_seg);
return true;
}
if (ssa_blkaddr + (segment_count_ssa << log_blocks_per_seg) !=
main_blkaddr) {
f2fs_info(sbi, "Wrong SSA boundary, start(%u) end(%u) blocks(%u)",
ssa_blkaddr, main_blkaddr,
segment_count_ssa << log_blocks_per_seg);
return true;
}
if (main_end_blkaddr > seg_end_blkaddr) {
f2fs_info(sbi, "Wrong MAIN_AREA boundary, start(%u) end(%llu) block(%u)",
main_blkaddr, seg_end_blkaddr,
segment_count_main << log_blocks_per_seg);
return true;
} else if (main_end_blkaddr < seg_end_blkaddr) {
int err = 0;
char *res;
/* fix in-memory information all the time */
raw_super->segment_count = cpu_to_le32((main_end_blkaddr -
segment0_blkaddr) >> log_blocks_per_seg);
if (f2fs_readonly(sb) || f2fs_hw_is_readonly(sbi)) {
set_sbi_flag(sbi, SBI_NEED_SB_WRITE);
res = "internally";
} else {
err = __f2fs_commit_super(bh, NULL);
res = err ? "failed" : "done";
}
f2fs_info(sbi, "Fix alignment : %s, start(%u) end(%llu) block(%u)",
res, main_blkaddr, seg_end_blkaddr,
segment_count_main << log_blocks_per_seg);
if (err)
return true;
}
return false;
}
static int sanity_check_raw_super(struct f2fs_sb_info *sbi,
struct buffer_head *bh)
{
block_t segment_count, segs_per_sec, secs_per_zone, segment_count_main;
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
block_t total_sections, blocks_per_seg;
struct f2fs_super_block *raw_super = (struct f2fs_super_block *)
(bh->b_data + F2FS_SUPER_OFFSET);
size_t crc_offset = 0;
__u32 crc = 0;
if (le32_to_cpu(raw_super->magic) != F2FS_SUPER_MAGIC) {
f2fs_info(sbi, "Magic Mismatch, valid(0x%x) - read(0x%x)",
F2FS_SUPER_MAGIC, le32_to_cpu(raw_super->magic));
return -EINVAL;
}
/* Check checksum_offset and crc in superblock */
if (__F2FS_HAS_FEATURE(raw_super, F2FS_FEATURE_SB_CHKSUM)) {
crc_offset = le32_to_cpu(raw_super->checksum_offset);
if (crc_offset !=
offsetof(struct f2fs_super_block, crc)) {
f2fs_info(sbi, "Invalid SB checksum offset: %zu",
crc_offset);
return -EFSCORRUPTED;
}
crc = le32_to_cpu(raw_super->crc);
if (!f2fs_crc_valid(sbi, crc, raw_super, crc_offset)) {
f2fs_info(sbi, "Invalid SB checksum value: %u", crc);
return -EFSCORRUPTED;
}
}
/* Currently, support only 4KB block size */
if (le32_to_cpu(raw_super->log_blocksize) != F2FS_BLKSIZE_BITS) {
f2fs_info(sbi, "Invalid log_blocksize (%u), supports only %u",
le32_to_cpu(raw_super->log_blocksize),
F2FS_BLKSIZE_BITS);
return -EFSCORRUPTED;
}
/* check log blocks per segment */
if (le32_to_cpu(raw_super->log_blocks_per_seg) != 9) {
f2fs_info(sbi, "Invalid log blocks per segment (%u)",
le32_to_cpu(raw_super->log_blocks_per_seg));
return -EFSCORRUPTED;
}
/* Currently, support 512/1024/2048/4096 bytes sector size */
if (le32_to_cpu(raw_super->log_sectorsize) >
F2FS_MAX_LOG_SECTOR_SIZE ||
le32_to_cpu(raw_super->log_sectorsize) <
F2FS_MIN_LOG_SECTOR_SIZE) {
f2fs_info(sbi, "Invalid log sectorsize (%u)",
le32_to_cpu(raw_super->log_sectorsize));
return -EFSCORRUPTED;
}
if (le32_to_cpu(raw_super->log_sectors_per_block) +
le32_to_cpu(raw_super->log_sectorsize) !=
F2FS_MAX_LOG_SECTOR_SIZE) {
f2fs_info(sbi, "Invalid log sectors per block(%u) log sectorsize(%u)",
le32_to_cpu(raw_super->log_sectors_per_block),
le32_to_cpu(raw_super->log_sectorsize));
return -EFSCORRUPTED;
}
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
segment_count = le32_to_cpu(raw_super->segment_count);
segment_count_main = le32_to_cpu(raw_super->segment_count_main);
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
segs_per_sec = le32_to_cpu(raw_super->segs_per_sec);
secs_per_zone = le32_to_cpu(raw_super->secs_per_zone);
total_sections = le32_to_cpu(raw_super->section_count);
/* blocks_per_seg should be 512, given the above check */
blocks_per_seg = BIT(le32_to_cpu(raw_super->log_blocks_per_seg));
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
if (segment_count > F2FS_MAX_SEGMENT ||
segment_count < F2FS_MIN_SEGMENTS) {
f2fs_info(sbi, "Invalid segment count (%u)", segment_count);
return -EFSCORRUPTED;
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
}
if (total_sections > segment_count_main || total_sections < 1 ||
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
segs_per_sec > segment_count || !segs_per_sec) {
f2fs_info(sbi, "Invalid segment/section count (%u, %u x %u)",
segment_count, total_sections, segs_per_sec);
return -EFSCORRUPTED;
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
}
f2fs: fix to do sanity check on segment/section count As syzbot reported: BUG: KASAN: slab-out-of-bounds in init_min_max_mtime fs/f2fs/segment.c:4710 [inline] BUG: KASAN: slab-out-of-bounds in f2fs_build_segment_manager+0x9302/0xa6d0 fs/f2fs/segment.c:4792 Read of size 8 at addr ffff8880a1b934a8 by task syz-executor682/6878 CPU: 1 PID: 6878 Comm: syz-executor682 Not tainted 5.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 init_min_max_mtime fs/f2fs/segment.c:4710 [inline] f2fs_build_segment_manager+0x9302/0xa6d0 fs/f2fs/segment.c:4792 f2fs_fill_super+0x381a/0x6e80 fs/f2fs/super.c:3633 mount_bdev+0x32e/0x3f0 fs/super.c:1417 legacy_get_tree+0x105/0x220 fs/fs_context.c:592 vfs_get_tree+0x89/0x2f0 fs/super.c:1547 do_new_mount fs/namespace.c:2875 [inline] path_mount+0x1387/0x20a0 fs/namespace.c:3192 do_mount fs/namespace.c:3205 [inline] __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount fs/namespace.c:3390 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The root cause is: if segs_per_sec is larger than one, and segment count in last section is less than segs_per_sec, we will suffer out-of-boundary memory access on sit_i->sentries[] in init_min_max_mtime(). Fix this by adding sanity check among segment count, section count and segs_per_sec value in sanity_check_raw_super(). Reported-by: syzbot+481a3ffab50fed41dcc0@syzkaller.appspotmail.com Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-29 04:23:34 +03:00
if (segment_count_main != total_sections * segs_per_sec) {
f2fs_info(sbi, "Invalid segment/section count (%u != %u * %u)",
segment_count_main, total_sections, segs_per_sec);
return -EFSCORRUPTED;
}
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
if ((segment_count / segs_per_sec) < total_sections) {
f2fs_info(sbi, "Small segment_count (%u < %u * %u)",
segment_count, segs_per_sec, total_sections);
return -EFSCORRUPTED;
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
}
if (segment_count > (le64_to_cpu(raw_super->block_count) >> 9)) {
f2fs_info(sbi, "Wrong segment_count / block_count (%u > %llu)",
segment_count, le64_to_cpu(raw_super->block_count));
return -EFSCORRUPTED;
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
}
if (RDEV(0).path[0]) {
block_t dev_seg_count = le32_to_cpu(RDEV(0).total_segments);
int i = 1;
while (i < MAX_DEVICES && RDEV(i).path[0]) {
dev_seg_count += le32_to_cpu(RDEV(i).total_segments);
i++;
}
if (segment_count != dev_seg_count) {
f2fs_info(sbi, "Segment count (%u) mismatch with total segments from devices (%u)",
segment_count, dev_seg_count);
return -EFSCORRUPTED;
}
} else {
if (__F2FS_HAS_FEATURE(raw_super, F2FS_FEATURE_BLKZONED) &&
!bdev_is_zoned(sbi->sb->s_bdev)) {
f2fs_info(sbi, "Zoned block device path is missing");
return -EFSCORRUPTED;
}
}
f2fs: fix to do sanity check with secs_per_zone As Wen Xu reported in below link: https://bugzilla.kernel.org/show_bug.cgi?id=200183 - Overview Divide zero in reset_curseg() when mounting a crafted f2fs image - Reproduce - Kernel message [ 588.281510] divide error: 0000 [#1] SMP KASAN PTI [ 588.282701] CPU: 0 PID: 1293 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 588.284000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 588.286178] RIP: 0010:reset_curseg+0x94/0x1a0 [ 588.298166] RSP: 0018:ffff8801e88d7940 EFLAGS: 00010246 [ 588.299360] RAX: 0000000000000014 RBX: ffff8801e1d46d00 RCX: ffffffffb88bf60b [ 588.300809] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e1d46d64 [ 588.305272] R13: 0000000000000000 R14: 0000000000000014 R15: 0000000000000000 [ 588.306822] FS: 00007fad85008840(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 588.308456] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 588.309623] CR2: 0000000001705078 CR3: 00000001f30f8000 CR4: 00000000000006f0 [ 588.311085] Call Trace: [ 588.311637] f2fs_build_segment_manager+0x103f/0x3410 [ 588.316136] ? f2fs_commit_super+0x1b0/0x1b0 [ 588.317031] ? set_blocksize+0x90/0x140 [ 588.319473] f2fs_mount+0x15/0x20 [ 588.320166] mount_fs+0x60/0x1a0 [ 588.320847] ? alloc_vfsmnt+0x309/0x360 [ 588.321647] vfs_kern_mount+0x6b/0x1a0 [ 588.322432] do_mount+0x34a/0x18c0 [ 588.323175] ? strndup_user+0x46/0x70 [ 588.323937] ? copy_mount_string+0x20/0x20 [ 588.324793] ? memcg_kmem_put_cache+0x1b/0xa0 [ 588.325702] ? kasan_check_write+0x14/0x20 [ 588.326562] ? _copy_from_user+0x6a/0x90 [ 588.327375] ? memdup_user+0x42/0x60 [ 588.328118] ksys_mount+0x83/0xd0 [ 588.328808] __x64_sys_mount+0x67/0x80 [ 588.329607] do_syscall_64+0x78/0x170 [ 588.330400] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 588.331461] RIP: 0033:0x7fad848e8b9a [ 588.336022] RSP: 002b:00007ffd7c5b6be8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 588.337547] RAX: ffffffffffffffda RBX: 00000000016f8030 RCX: 00007fad848e8b9a [ 588.338999] RDX: 00000000016f8210 RSI: 00000000016f9f30 RDI: 0000000001700ec0 [ 588.340442] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 588.341887] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001700ec0 [ 588.343341] R13: 00000000016f8210 R14: 0000000000000000 R15: 0000000000000003 [ 588.354891] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 588.355862] RIP: 0010:reset_curseg+0x94/0x1a0 [ 588.360742] RSP: 0018:ffff8801e88d7940 EFLAGS: 00010246 [ 588.361812] RAX: 0000000000000014 RBX: ffff8801e1d46d00 RCX: ffffffffb88bf60b [ 588.363485] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e1d46d64 [ 588.365213] RBP: ffff8801e88d7968 R08: ffffed003c32266f R09: ffffed003c32266f [ 588.366661] R10: 0000000000000001 R11: ffffed003c32266e R12: ffff8801f0337700 [ 588.368110] R13: 0000000000000000 R14: 0000000000000014 R15: 0000000000000000 [ 588.370057] FS: 00007fad85008840(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 588.372099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 588.373291] CR2: 0000000001705078 CR3: 00000001f30f8000 CR4: 00000000000006f0 - Location https://elixir.bootlin.com/linux/latest/source/fs/f2fs/segment.c#L2147 curseg->zone = GET_ZONE_FROM_SEG(sbi, curseg->segno); If secs_per_zone is corrupted due to fuzzing test, it will cause divide zero operation when using GET_ZONE_FROM_SEG macro, so we should do more sanity check with secs_per_zone during mount to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-22 19:12:36 +03:00
if (secs_per_zone > total_sections || !secs_per_zone) {
f2fs_info(sbi, "Wrong secs_per_zone / total_sections (%u, %u)",
secs_per_zone, total_sections);
return -EFSCORRUPTED;
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
}
if (le32_to_cpu(raw_super->extension_count) > F2FS_MAX_EXTENSION ||
raw_super->hot_ext_count > F2FS_MAX_EXTENSION ||
(le32_to_cpu(raw_super->extension_count) +
raw_super->hot_ext_count) > F2FS_MAX_EXTENSION) {
f2fs_info(sbi, "Corrupted extension count (%u + %u > %u)",
le32_to_cpu(raw_super->extension_count),
raw_super->hot_ext_count,
F2FS_MAX_EXTENSION);
return -EFSCORRUPTED;
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
}
if (le32_to_cpu(raw_super->cp_payload) >=
(blocks_per_seg - F2FS_CP_PACKS -
NR_CURSEG_PERSIST_TYPE)) {
f2fs_info(sbi, "Insane cp_payload (%u >= %u)",
le32_to_cpu(raw_super->cp_payload),
blocks_per_seg - F2FS_CP_PACKS -
NR_CURSEG_PERSIST_TYPE);
return -EFSCORRUPTED;
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-28 05:03:22 +03:00
}
/* check reserved ino info */
if (le32_to_cpu(raw_super->node_ino) != 1 ||
le32_to_cpu(raw_super->meta_ino) != 2 ||
le32_to_cpu(raw_super->root_ino) != 3) {
f2fs_info(sbi, "Invalid Fs Meta Ino: node(%u) meta(%u) root(%u)",
le32_to_cpu(raw_super->node_ino),
le32_to_cpu(raw_super->meta_ino),
le32_to_cpu(raw_super->root_ino));
return -EFSCORRUPTED;
}
/* check CP/SIT/NAT/SSA/MAIN_AREA area boundary */
if (sanity_check_area_boundary(sbi, bh))
return -EFSCORRUPTED;
return 0;
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_sanity_check_ckpt(struct f2fs_sb_info *sbi)
{
unsigned int total, fsmeta;
struct f2fs_super_block *raw_super = F2FS_RAW_SUPER(sbi);
struct f2fs_checkpoint *ckpt = F2FS_CKPT(sbi);
unsigned int ovp_segments, reserved_segments;
unsigned int main_segs, blocks_per_seg;
f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-23 06:25:19 +03:00
unsigned int sit_segs, nat_segs;
unsigned int sit_bitmap_size, nat_bitmap_size;
unsigned int log_blocks_per_seg;
f2fs: fix to do sanity check with user_block_count This patch fixs to do sanity check with user_block_count. - Overview Divide zero in utilization when mount() a corrupted f2fs image - Reproduce (4.18 upstream kernel) - Kernel message [ 564.099503] F2FS-fs (loop0): invalid crc value [ 564.101991] divide error: 0000 [#1] SMP KASAN PTI [ 564.103103] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Not tainted 4.18.0-rc1+ #4 [ 564.104584] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.106624] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.107692] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.111686] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.112775] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.114250] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.115706] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.117177] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.118634] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.120094] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.121748] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.122923] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.124383] Call Trace: [ 564.124924] ? __issue_discard_cmd+0x480/0x480 [ 564.125882] ? __sched_text_start+0x8/0x8 [ 564.126756] ? __kthread_parkme+0xcb/0x100 [ 564.127620] ? kthread_blkcg+0x70/0x70 [ 564.128412] kthread+0x180/0x1d0 [ 564.129105] ? __issue_discard_cmd+0x480/0x480 [ 564.130029] ? kthread_associate_blkcg+0x150/0x150 [ 564.131033] ret_from_fork+0x35/0x40 [ 564.131794] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 564.141798] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 564.142773] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.143885] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.147776] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.148856] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.150424] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.151906] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.153463] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.154915] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.156405] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.158070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.159279] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.161043] ================================================================== [ 564.162587] BUG: KASAN: stack-out-of-bounds in from_kuid_munged+0x1d/0x50 [ 564.163994] Read of size 4 at addr ffff8801f3117c84 by task f2fs_discard-7:/1298 [ 564.165852] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Tainted: G D 4.18.0-rc1+ #4 [ 564.167593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.169522] Call Trace: [ 564.170057] dump_stack+0x7b/0xb5 [ 564.170778] print_address_description+0x70/0x290 [ 564.171765] kasan_report+0x291/0x390 [ 564.172540] ? from_kuid_munged+0x1d/0x50 [ 564.173408] __asan_load4+0x78/0x80 [ 564.174148] from_kuid_munged+0x1d/0x50 [ 564.174962] do_notify_parent+0x1f5/0x4f0 [ 564.175808] ? send_sigqueue+0x390/0x390 [ 564.176639] ? css_set_move_task+0x152/0x340 [ 564.184197] do_exit+0x1290/0x1390 [ 564.184950] ? __issue_discard_cmd+0x480/0x480 [ 564.185884] ? mm_update_next_owner+0x380/0x380 [ 564.186829] ? __sched_text_start+0x8/0x8 [ 564.187672] ? __kthread_parkme+0xcb/0x100 [ 564.188528] ? kthread_blkcg+0x70/0x70 [ 564.189333] ? kthread+0x180/0x1d0 [ 564.190052] ? __issue_discard_cmd+0x480/0x480 [ 564.190983] rewind_stack_do_exit+0x17/0x20 [ 564.192190] The buggy address belongs to the page: [ 564.193213] page:ffffea0007cc45c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 564.194856] flags: 0x2ffff0000000000() [ 564.195644] raw: 02ffff0000000000 0000000000000000 dead000000000200 0000000000000000 [ 564.197247] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 564.198826] page dumped because: kasan: bad access detected [ 564.200299] Memory state around the buggy address: [ 564.201306] ffff8801f3117b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.202779] ffff8801f3117c00: 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 [ 564.204252] >ffff8801f3117c80: f3 f3 f3 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 564.205742] ^ [ 564.206424] ffff8801f3117d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.207908] ffff8801f3117d80: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 564.209389] ================================================================== [ 564.231795] F2FS-fs (loop0): Mounted with checkpoint version = 2 - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L586 return div_u64((u64)valid_user_blocks(sbi) * 100, sbi->user_block_count); Missing checks on sbi->user_block_count. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-27 13:05:54 +03:00
unsigned int segment_count_main;
f2fs: fix to do sanity check with cp_pack_start_sum After fuzzing, cp_pack_start_sum could be corrupted, so current log's summary info should be wrong due to loading incorrect summary block. Then, if segment's type in current log is exceeded NR_CURSEG_TYPE, it can lead accessing invalid dirty_i->dirty_segmap bitmap finally. Add sanity check for cp_pack_start_sum to fix this issue. https://bugzilla.kernel.org/show_bug.cgi?id=200419 - Reproduce - Kernel message (f2fs-dev w/ KASAN) [ 3117.578432] F2FS-fs (loop0): Invalid log blocks per segment (8) [ 3117.578445] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 3117.581364] F2FS-fs (loop0): invalid crc_offset: 30716 [ 3117.583564] WARNING: CPU: 1 PID: 1225 at fs/f2fs/checkpoint.c:90 __get_meta_page+0x448/0x4b0 [ 3117.583570] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.584014] CPU: 1 PID: 1225 Comm: mount Not tainted 4.17.0+ #1 [ 3117.584017] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.584022] RIP: 0010:__get_meta_page+0x448/0x4b0 [ 3117.584023] Code: 00 49 8d bc 24 84 00 00 00 e8 74 54 da ff 41 83 8c 24 84 00 00 00 08 4c 89 f6 4c 89 ef e8 c0 d9 95 00 48 89 ef e8 18 e3 00 00 <0f> 0b f0 80 4d 48 04 e9 0f fe ff ff 0f 0b 48 89 c7 48 89 04 24 e8 [ 3117.584072] RSP: 0018:ffff88018eb678c0 EFLAGS: 00010286 [ 3117.584082] RAX: ffff88018f0a6a78 RBX: ffffea0007a46600 RCX: ffffffff9314d1b2 [ 3117.584085] RDX: ffffffff00000001 RSI: 0000000000000000 RDI: ffff88018f0a6a98 [ 3117.584087] RBP: ffff88018ebe9980 R08: 0000000000000002 R09: 0000000000000001 [ 3117.584090] R10: 0000000000000001 R11: ffffed00326e4450 R12: ffff880193722200 [ 3117.584092] R13: ffff88018ebe9afc R14: 0000000000000206 R15: ffff88018eb67900 [ 3117.584096] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.584098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.584101] CR2: 00000000016f21b8 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.584112] Call Trace: [ 3117.584121] ? f2fs_set_meta_page_dirty+0x150/0x150 [ 3117.584127] ? f2fs_build_segment_manager+0xbf9/0x3190 [ 3117.584133] ? f2fs_npages_for_summary_flush+0x75/0x120 [ 3117.584145] f2fs_build_segment_manager+0xda8/0x3190 [ 3117.584151] ? f2fs_get_valid_checkpoint+0x298/0xa00 [ 3117.584156] ? f2fs_flush_sit_entries+0x10e0/0x10e0 [ 3117.584184] ? map_id_range_down+0x17c/0x1b0 [ 3117.584188] ? __put_user_ns+0x30/0x30 [ 3117.584206] ? find_next_bit+0x53/0x90 [ 3117.584237] ? cpumask_next+0x16/0x20 [ 3117.584249] f2fs_fill_super+0x1948/0x2b40 [ 3117.584258] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584279] ? sget_userns+0x65e/0x690 [ 3117.584296] ? set_blocksize+0x88/0x130 [ 3117.584302] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584305] mount_bdev+0x1c0/0x200 [ 3117.584310] mount_fs+0x5c/0x190 [ 3117.584320] vfs_kern_mount+0x64/0x190 [ 3117.584330] do_mount+0x2e4/0x1450 [ 3117.584343] ? lockref_put_return+0x130/0x130 [ 3117.584347] ? copy_mount_string+0x20/0x20 [ 3117.584357] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.584362] ? kasan_kmalloc+0xa6/0xd0 [ 3117.584373] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.584377] ? __kmalloc_track_caller+0x196/0x210 [ 3117.584383] ? _copy_from_user+0x61/0x90 [ 3117.584396] ? memdup_user+0x3e/0x60 [ 3117.584401] ksys_mount+0x7e/0xd0 [ 3117.584405] __x64_sys_mount+0x62/0x70 [ 3117.584427] do_syscall_64+0x73/0x160 [ 3117.584440] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.584455] RIP: 0033:0x7f5693f14b9a [ 3117.584456] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.584505] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.584510] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.584512] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.584514] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.584516] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.584519] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.584523] ---[ end trace a8e0d899985faf31 ]--- [ 3117.685663] F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix. [ 3117.685673] F2FS-fs (loop0): recover_data: ino = 2 (i_size: recover) recovered = 1, err = 0 [ 3117.685707] ================================================================== [ 3117.685955] BUG: KASAN: slab-out-of-bounds in __remove_dirty_segment+0xdd/0x1e0 [ 3117.686175] Read of size 8 at addr ffff88018f0a63d0 by task mount/1225 [ 3117.686477] CPU: 0 PID: 1225 Comm: mount Tainted: G W 4.17.0+ #1 [ 3117.686481] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.686483] Call Trace: [ 3117.686494] dump_stack+0x71/0xab [ 3117.686512] print_address_description+0x6b/0x290 [ 3117.686517] kasan_report+0x28e/0x390 [ 3117.686522] ? __remove_dirty_segment+0xdd/0x1e0 [ 3117.686527] __remove_dirty_segment+0xdd/0x1e0 [ 3117.686532] locate_dirty_segment+0x189/0x190 [ 3117.686538] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.686543] recover_data+0x703/0x2c20 [ 3117.686547] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.686553] ? ksys_mount+0x7e/0xd0 [ 3117.686564] ? policy_nodemask+0x1a/0x90 [ 3117.686567] ? policy_node+0x56/0x70 [ 3117.686571] ? add_fsync_inode+0xf0/0xf0 [ 3117.686592] ? blk_finish_plug+0x44/0x60 [ 3117.686597] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.686602] ? find_inode_fast+0xac/0xc0 [ 3117.686606] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.686618] ? __radix_tree_lookup+0x150/0x150 [ 3117.686633] ? dqget+0x670/0x670 [ 3117.686648] ? pagecache_get_page+0x29/0x410 [ 3117.686656] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.686660] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.686664] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.686670] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.686674] ? rb_insert_color+0x323/0x3d0 [ 3117.686678] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.686683] ? proc_register+0x153/0x1d0 [ 3117.686686] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.686695] ? f2fs_attr_store+0x50/0x50 [ 3117.686700] ? proc_create_single_data+0x52/0x60 [ 3117.686707] f2fs_fill_super+0x1d06/0x2b40 [ 3117.686728] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686735] ? sget_userns+0x65e/0x690 [ 3117.686740] ? set_blocksize+0x88/0x130 [ 3117.686745] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686748] mount_bdev+0x1c0/0x200 [ 3117.686753] mount_fs+0x5c/0x190 [ 3117.686758] vfs_kern_mount+0x64/0x190 [ 3117.686762] do_mount+0x2e4/0x1450 [ 3117.686769] ? lockref_put_return+0x130/0x130 [ 3117.686773] ? copy_mount_string+0x20/0x20 [ 3117.686777] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.686780] ? kasan_kmalloc+0xa6/0xd0 [ 3117.686786] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.686790] ? __kmalloc_track_caller+0x196/0x210 [ 3117.686795] ? _copy_from_user+0x61/0x90 [ 3117.686801] ? memdup_user+0x3e/0x60 [ 3117.686804] ksys_mount+0x7e/0xd0 [ 3117.686809] __x64_sys_mount+0x62/0x70 [ 3117.686816] do_syscall_64+0x73/0x160 [ 3117.686824] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.686829] RIP: 0033:0x7f5693f14b9a [ 3117.686830] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.686887] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.686892] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.686894] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.686896] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.686899] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.686901] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.687005] Allocated by task 1225: [ 3117.687152] kasan_kmalloc+0xa6/0xd0 [ 3117.687157] kmem_cache_alloc_trace+0xfd/0x200 [ 3117.687161] f2fs_build_segment_manager+0x2d09/0x3190 [ 3117.687165] f2fs_fill_super+0x1948/0x2b40 [ 3117.687168] mount_bdev+0x1c0/0x200 [ 3117.687171] mount_fs+0x5c/0x190 [ 3117.687174] vfs_kern_mount+0x64/0x190 [ 3117.687177] do_mount+0x2e4/0x1450 [ 3117.687180] ksys_mount+0x7e/0xd0 [ 3117.687182] __x64_sys_mount+0x62/0x70 [ 3117.687186] do_syscall_64+0x73/0x160 [ 3117.687190] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.687285] Freed by task 19: [ 3117.687412] __kasan_slab_free+0x137/0x190 [ 3117.687416] kfree+0x8b/0x1b0 [ 3117.687460] ttm_bo_man_put_node+0x61/0x80 [ttm] [ 3117.687476] ttm_bo_cleanup_refs+0x15f/0x250 [ttm] [ 3117.687492] ttm_bo_delayed_delete+0x2f0/0x300 [ttm] [ 3117.687507] ttm_bo_delayed_workqueue+0x17/0x50 [ttm] [ 3117.687528] process_one_work+0x2f9/0x740 [ 3117.687531] worker_thread+0x78/0x6b0 [ 3117.687541] kthread+0x177/0x1c0 [ 3117.687545] ret_from_fork+0x35/0x40 [ 3117.687638] The buggy address belongs to the object at ffff88018f0a6300 which belongs to the cache kmalloc-192 of size 192 [ 3117.688014] The buggy address is located 16 bytes to the right of 192-byte region [ffff88018f0a6300, ffff88018f0a63c0) [ 3117.688382] The buggy address belongs to the page: [ 3117.688554] page:ffffea00063c2980 count:1 mapcount:0 mapping:ffff8801f3403180 index:0x0 [ 3117.688788] flags: 0x17fff8000000100(slab) [ 3117.688944] raw: 017fff8000000100 ffffea00063c2840 0000000e0000000e ffff8801f3403180 [ 3117.689166] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 3117.689386] page dumped because: kasan: bad access detected [ 3117.689653] Memory state around the buggy address: [ 3117.689816] ffff88018f0a6280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3117.690027] ffff88018f0a6300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690239] >ffff88018f0a6380: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.690448] ^ [ 3117.690644] ffff88018f0a6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690868] ffff88018f0a6480: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.691077] ================================================================== [ 3117.691290] Disabling lock debugging due to kernel taint [ 3117.693893] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 3117.694120] PGD 80000001f01bc067 P4D 80000001f01bc067 PUD 1d9638067 PMD 0 [ 3117.694338] Oops: 0002 [#1] SMP KASAN PTI [ 3117.694490] CPU: 1 PID: 1225 Comm: mount Tainted: G B W 4.17.0+ #1 [ 3117.694703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.695073] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.695246] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.695793] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.695969] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.696182] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.696391] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.696604] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.696813] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.697032] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.697280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.702357] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.707235] Call Trace: [ 3117.712077] locate_dirty_segment+0x189/0x190 [ 3117.716891] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.721617] recover_data+0x703/0x2c20 [ 3117.726316] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.730957] ? ksys_mount+0x7e/0xd0 [ 3117.735573] ? policy_nodemask+0x1a/0x90 [ 3117.740198] ? policy_node+0x56/0x70 [ 3117.744829] ? add_fsync_inode+0xf0/0xf0 [ 3117.749487] ? blk_finish_plug+0x44/0x60 [ 3117.754152] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.758831] ? find_inode_fast+0xac/0xc0 [ 3117.763448] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.768046] ? __radix_tree_lookup+0x150/0x150 [ 3117.772603] ? dqget+0x670/0x670 [ 3117.777159] ? pagecache_get_page+0x29/0x410 [ 3117.781648] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.786067] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.790476] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.794790] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.799086] ? rb_insert_color+0x323/0x3d0 [ 3117.803304] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.807563] ? proc_register+0x153/0x1d0 [ 3117.811766] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.815947] ? f2fs_attr_store+0x50/0x50 [ 3117.820087] ? proc_create_single_data+0x52/0x60 [ 3117.824262] f2fs_fill_super+0x1d06/0x2b40 [ 3117.828367] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.832432] ? sget_userns+0x65e/0x690 [ 3117.836500] ? set_blocksize+0x88/0x130 [ 3117.840501] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.844420] mount_bdev+0x1c0/0x200 [ 3117.848275] mount_fs+0x5c/0x190 [ 3117.852053] vfs_kern_mount+0x64/0x190 [ 3117.855810] do_mount+0x2e4/0x1450 [ 3117.859441] ? lockref_put_return+0x130/0x130 [ 3117.862996] ? copy_mount_string+0x20/0x20 [ 3117.866417] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.869719] ? kasan_kmalloc+0xa6/0xd0 [ 3117.872948] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.876121] ? __kmalloc_track_caller+0x196/0x210 [ 3117.879333] ? _copy_from_user+0x61/0x90 [ 3117.882467] ? memdup_user+0x3e/0x60 [ 3117.885604] ksys_mount+0x7e/0xd0 [ 3117.888700] __x64_sys_mount+0x62/0x70 [ 3117.891742] do_syscall_64+0x73/0x160 [ 3117.894692] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.897669] RIP: 0033:0x7f5693f14b9a [ 3117.900563] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.906922] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.910159] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.913469] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.916764] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.920071] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.923393] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.926680] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.949979] CR2: 0000000000000000 [ 3117.954283] ---[ end trace a8e0d899985faf32 ]--- [ 3117.958575] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.962810] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.971789] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.976333] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.980926] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.985497] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.990098] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.994761] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.999392] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3118.004096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3118.008816] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 - Location https://elixir.bootlin.com/linux/v4.18-rc3/source/fs/f2fs/segment.c#L775 if (test_and_clear_bit(segno, dirty_i->dirty_segmap[t])) dirty_i->nr_dirty[t]--; Here dirty_i->dirty_segmap[t] can be NULL which leads to crash in test_and_clear_bit() Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 14:16:11 +03:00
unsigned int cp_pack_start_sum, cp_payload;
block_t user_block_count, valid_user_blocks;
block_t avail_node_count, valid_node_count;
unsigned int nat_blocks, nat_bits_bytes, nat_bits_blocks;
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 15:34:12 +03:00
int i, j;
total = le32_to_cpu(raw_super->segment_count);
fsmeta = le32_to_cpu(raw_super->segment_count_ckpt);
f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-23 06:25:19 +03:00
sit_segs = le32_to_cpu(raw_super->segment_count_sit);
fsmeta += sit_segs;
nat_segs = le32_to_cpu(raw_super->segment_count_nat);
fsmeta += nat_segs;
fsmeta += le32_to_cpu(ckpt->rsvd_segment_count);
fsmeta += le32_to_cpu(raw_super->segment_count_ssa);
if (unlikely(fsmeta >= total))
return 1;
ovp_segments = le32_to_cpu(ckpt->overprov_segment_count);
reserved_segments = le32_to_cpu(ckpt->rsvd_segment_count);
if (!f2fs_sb_has_readonly(sbi) &&
unlikely(fsmeta < F2FS_MIN_META_SEGMENTS ||
ovp_segments == 0 || reserved_segments == 0)) {
f2fs_err(sbi, "Wrong layout: check mkfs.f2fs version");
return 1;
}
f2fs: fix to do sanity check with user_block_count This patch fixs to do sanity check with user_block_count. - Overview Divide zero in utilization when mount() a corrupted f2fs image - Reproduce (4.18 upstream kernel) - Kernel message [ 564.099503] F2FS-fs (loop0): invalid crc value [ 564.101991] divide error: 0000 [#1] SMP KASAN PTI [ 564.103103] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Not tainted 4.18.0-rc1+ #4 [ 564.104584] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.106624] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.107692] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.111686] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.112775] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.114250] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.115706] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.117177] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.118634] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.120094] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.121748] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.122923] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.124383] Call Trace: [ 564.124924] ? __issue_discard_cmd+0x480/0x480 [ 564.125882] ? __sched_text_start+0x8/0x8 [ 564.126756] ? __kthread_parkme+0xcb/0x100 [ 564.127620] ? kthread_blkcg+0x70/0x70 [ 564.128412] kthread+0x180/0x1d0 [ 564.129105] ? __issue_discard_cmd+0x480/0x480 [ 564.130029] ? kthread_associate_blkcg+0x150/0x150 [ 564.131033] ret_from_fork+0x35/0x40 [ 564.131794] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 564.141798] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 564.142773] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.143885] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.147776] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.148856] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.150424] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.151906] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.153463] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.154915] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.156405] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.158070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.159279] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.161043] ================================================================== [ 564.162587] BUG: KASAN: stack-out-of-bounds in from_kuid_munged+0x1d/0x50 [ 564.163994] Read of size 4 at addr ffff8801f3117c84 by task f2fs_discard-7:/1298 [ 564.165852] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Tainted: G D 4.18.0-rc1+ #4 [ 564.167593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.169522] Call Trace: [ 564.170057] dump_stack+0x7b/0xb5 [ 564.170778] print_address_description+0x70/0x290 [ 564.171765] kasan_report+0x291/0x390 [ 564.172540] ? from_kuid_munged+0x1d/0x50 [ 564.173408] __asan_load4+0x78/0x80 [ 564.174148] from_kuid_munged+0x1d/0x50 [ 564.174962] do_notify_parent+0x1f5/0x4f0 [ 564.175808] ? send_sigqueue+0x390/0x390 [ 564.176639] ? css_set_move_task+0x152/0x340 [ 564.184197] do_exit+0x1290/0x1390 [ 564.184950] ? __issue_discard_cmd+0x480/0x480 [ 564.185884] ? mm_update_next_owner+0x380/0x380 [ 564.186829] ? __sched_text_start+0x8/0x8 [ 564.187672] ? __kthread_parkme+0xcb/0x100 [ 564.188528] ? kthread_blkcg+0x70/0x70 [ 564.189333] ? kthread+0x180/0x1d0 [ 564.190052] ? __issue_discard_cmd+0x480/0x480 [ 564.190983] rewind_stack_do_exit+0x17/0x20 [ 564.192190] The buggy address belongs to the page: [ 564.193213] page:ffffea0007cc45c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 564.194856] flags: 0x2ffff0000000000() [ 564.195644] raw: 02ffff0000000000 0000000000000000 dead000000000200 0000000000000000 [ 564.197247] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 564.198826] page dumped because: kasan: bad access detected [ 564.200299] Memory state around the buggy address: [ 564.201306] ffff8801f3117b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.202779] ffff8801f3117c00: 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 [ 564.204252] >ffff8801f3117c80: f3 f3 f3 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 564.205742] ^ [ 564.206424] ffff8801f3117d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.207908] ffff8801f3117d80: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 564.209389] ================================================================== [ 564.231795] F2FS-fs (loop0): Mounted with checkpoint version = 2 - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L586 return div_u64((u64)valid_user_blocks(sbi) * 100, sbi->user_block_count); Missing checks on sbi->user_block_count. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-27 13:05:54 +03:00
user_block_count = le64_to_cpu(ckpt->user_block_count);
segment_count_main = le32_to_cpu(raw_super->segment_count_main) +
(f2fs_sb_has_readonly(sbi) ? 1 : 0);
f2fs: fix to do sanity check with user_block_count This patch fixs to do sanity check with user_block_count. - Overview Divide zero in utilization when mount() a corrupted f2fs image - Reproduce (4.18 upstream kernel) - Kernel message [ 564.099503] F2FS-fs (loop0): invalid crc value [ 564.101991] divide error: 0000 [#1] SMP KASAN PTI [ 564.103103] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Not tainted 4.18.0-rc1+ #4 [ 564.104584] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.106624] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.107692] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.111686] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.112775] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.114250] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.115706] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.117177] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.118634] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.120094] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.121748] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.122923] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.124383] Call Trace: [ 564.124924] ? __issue_discard_cmd+0x480/0x480 [ 564.125882] ? __sched_text_start+0x8/0x8 [ 564.126756] ? __kthread_parkme+0xcb/0x100 [ 564.127620] ? kthread_blkcg+0x70/0x70 [ 564.128412] kthread+0x180/0x1d0 [ 564.129105] ? __issue_discard_cmd+0x480/0x480 [ 564.130029] ? kthread_associate_blkcg+0x150/0x150 [ 564.131033] ret_from_fork+0x35/0x40 [ 564.131794] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 564.141798] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 564.142773] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.143885] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.147776] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.148856] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.150424] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.151906] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.153463] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.154915] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.156405] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.158070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.159279] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.161043] ================================================================== [ 564.162587] BUG: KASAN: stack-out-of-bounds in from_kuid_munged+0x1d/0x50 [ 564.163994] Read of size 4 at addr ffff8801f3117c84 by task f2fs_discard-7:/1298 [ 564.165852] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Tainted: G D 4.18.0-rc1+ #4 [ 564.167593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.169522] Call Trace: [ 564.170057] dump_stack+0x7b/0xb5 [ 564.170778] print_address_description+0x70/0x290 [ 564.171765] kasan_report+0x291/0x390 [ 564.172540] ? from_kuid_munged+0x1d/0x50 [ 564.173408] __asan_load4+0x78/0x80 [ 564.174148] from_kuid_munged+0x1d/0x50 [ 564.174962] do_notify_parent+0x1f5/0x4f0 [ 564.175808] ? send_sigqueue+0x390/0x390 [ 564.176639] ? css_set_move_task+0x152/0x340 [ 564.184197] do_exit+0x1290/0x1390 [ 564.184950] ? __issue_discard_cmd+0x480/0x480 [ 564.185884] ? mm_update_next_owner+0x380/0x380 [ 564.186829] ? __sched_text_start+0x8/0x8 [ 564.187672] ? __kthread_parkme+0xcb/0x100 [ 564.188528] ? kthread_blkcg+0x70/0x70 [ 564.189333] ? kthread+0x180/0x1d0 [ 564.190052] ? __issue_discard_cmd+0x480/0x480 [ 564.190983] rewind_stack_do_exit+0x17/0x20 [ 564.192190] The buggy address belongs to the page: [ 564.193213] page:ffffea0007cc45c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 564.194856] flags: 0x2ffff0000000000() [ 564.195644] raw: 02ffff0000000000 0000000000000000 dead000000000200 0000000000000000 [ 564.197247] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 564.198826] page dumped because: kasan: bad access detected [ 564.200299] Memory state around the buggy address: [ 564.201306] ffff8801f3117b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.202779] ffff8801f3117c00: 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 [ 564.204252] >ffff8801f3117c80: f3 f3 f3 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 564.205742] ^ [ 564.206424] ffff8801f3117d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.207908] ffff8801f3117d80: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 564.209389] ================================================================== [ 564.231795] F2FS-fs (loop0): Mounted with checkpoint version = 2 - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L586 return div_u64((u64)valid_user_blocks(sbi) * 100, sbi->user_block_count); Missing checks on sbi->user_block_count. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-27 13:05:54 +03:00
log_blocks_per_seg = le32_to_cpu(raw_super->log_blocks_per_seg);
if (!user_block_count || user_block_count >=
segment_count_main << log_blocks_per_seg) {
f2fs_err(sbi, "Wrong user_block_count: %u",
user_block_count);
f2fs: fix to do sanity check with user_block_count This patch fixs to do sanity check with user_block_count. - Overview Divide zero in utilization when mount() a corrupted f2fs image - Reproduce (4.18 upstream kernel) - Kernel message [ 564.099503] F2FS-fs (loop0): invalid crc value [ 564.101991] divide error: 0000 [#1] SMP KASAN PTI [ 564.103103] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Not tainted 4.18.0-rc1+ #4 [ 564.104584] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.106624] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.107692] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.111686] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.112775] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.114250] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.115706] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.117177] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.118634] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.120094] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.121748] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.122923] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.124383] Call Trace: [ 564.124924] ? __issue_discard_cmd+0x480/0x480 [ 564.125882] ? __sched_text_start+0x8/0x8 [ 564.126756] ? __kthread_parkme+0xcb/0x100 [ 564.127620] ? kthread_blkcg+0x70/0x70 [ 564.128412] kthread+0x180/0x1d0 [ 564.129105] ? __issue_discard_cmd+0x480/0x480 [ 564.130029] ? kthread_associate_blkcg+0x150/0x150 [ 564.131033] ret_from_fork+0x35/0x40 [ 564.131794] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 564.141798] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 564.142773] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.143885] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.147776] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.148856] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.150424] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.151906] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.153463] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.154915] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.156405] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.158070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.159279] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.161043] ================================================================== [ 564.162587] BUG: KASAN: stack-out-of-bounds in from_kuid_munged+0x1d/0x50 [ 564.163994] Read of size 4 at addr ffff8801f3117c84 by task f2fs_discard-7:/1298 [ 564.165852] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Tainted: G D 4.18.0-rc1+ #4 [ 564.167593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.169522] Call Trace: [ 564.170057] dump_stack+0x7b/0xb5 [ 564.170778] print_address_description+0x70/0x290 [ 564.171765] kasan_report+0x291/0x390 [ 564.172540] ? from_kuid_munged+0x1d/0x50 [ 564.173408] __asan_load4+0x78/0x80 [ 564.174148] from_kuid_munged+0x1d/0x50 [ 564.174962] do_notify_parent+0x1f5/0x4f0 [ 564.175808] ? send_sigqueue+0x390/0x390 [ 564.176639] ? css_set_move_task+0x152/0x340 [ 564.184197] do_exit+0x1290/0x1390 [ 564.184950] ? __issue_discard_cmd+0x480/0x480 [ 564.185884] ? mm_update_next_owner+0x380/0x380 [ 564.186829] ? __sched_text_start+0x8/0x8 [ 564.187672] ? __kthread_parkme+0xcb/0x100 [ 564.188528] ? kthread_blkcg+0x70/0x70 [ 564.189333] ? kthread+0x180/0x1d0 [ 564.190052] ? __issue_discard_cmd+0x480/0x480 [ 564.190983] rewind_stack_do_exit+0x17/0x20 [ 564.192190] The buggy address belongs to the page: [ 564.193213] page:ffffea0007cc45c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 564.194856] flags: 0x2ffff0000000000() [ 564.195644] raw: 02ffff0000000000 0000000000000000 dead000000000200 0000000000000000 [ 564.197247] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 564.198826] page dumped because: kasan: bad access detected [ 564.200299] Memory state around the buggy address: [ 564.201306] ffff8801f3117b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.202779] ffff8801f3117c00: 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 [ 564.204252] >ffff8801f3117c80: f3 f3 f3 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 564.205742] ^ [ 564.206424] ffff8801f3117d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.207908] ffff8801f3117d80: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 564.209389] ================================================================== [ 564.231795] F2FS-fs (loop0): Mounted with checkpoint version = 2 - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L586 return div_u64((u64)valid_user_blocks(sbi) * 100, sbi->user_block_count); Missing checks on sbi->user_block_count. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-27 13:05:54 +03:00
return 1;
}
valid_user_blocks = le64_to_cpu(ckpt->valid_block_count);
if (valid_user_blocks > user_block_count) {
f2fs_err(sbi, "Wrong valid_user_blocks: %u, user_block_count: %u",
valid_user_blocks, user_block_count);
return 1;
}
valid_node_count = le32_to_cpu(ckpt->valid_node_count);
avail_node_count = sbi->total_node_count - F2FS_RESERVED_NODE_NUM;
if (valid_node_count > avail_node_count) {
f2fs_err(sbi, "Wrong valid_node_count: %u, avail_node_count: %u",
valid_node_count, avail_node_count);
return 1;
}
main_segs = le32_to_cpu(raw_super->segment_count_main);
blocks_per_seg = sbi->blocks_per_seg;
for (i = 0; i < NR_CURSEG_NODE_TYPE; i++) {
if (le32_to_cpu(ckpt->cur_node_segno[i]) >= main_segs ||
le16_to_cpu(ckpt->cur_node_blkoff[i]) >= blocks_per_seg)
return 1;
if (f2fs_sb_has_readonly(sbi))
goto check_data;
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 15:34:12 +03:00
for (j = i + 1; j < NR_CURSEG_NODE_TYPE; j++) {
if (le32_to_cpu(ckpt->cur_node_segno[i]) ==
le32_to_cpu(ckpt->cur_node_segno[j])) {
f2fs_err(sbi, "Node segment (%u, %u) has the same segno: %u",
i, j,
le32_to_cpu(ckpt->cur_node_segno[i]));
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 15:34:12 +03:00
return 1;
}
}
}
check_data:
for (i = 0; i < NR_CURSEG_DATA_TYPE; i++) {
if (le32_to_cpu(ckpt->cur_data_segno[i]) >= main_segs ||
le16_to_cpu(ckpt->cur_data_blkoff[i]) >= blocks_per_seg)
return 1;
if (f2fs_sb_has_readonly(sbi))
goto skip_cross;
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 15:34:12 +03:00
for (j = i + 1; j < NR_CURSEG_DATA_TYPE; j++) {
if (le32_to_cpu(ckpt->cur_data_segno[i]) ==
le32_to_cpu(ckpt->cur_data_segno[j])) {
f2fs_err(sbi, "Data segment (%u, %u) has the same segno: %u",
i, j,
le32_to_cpu(ckpt->cur_data_segno[i]));
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 15:34:12 +03:00
return 1;
}
}
}
for (i = 0; i < NR_CURSEG_NODE_TYPE; i++) {
for (j = 0; j < NR_CURSEG_DATA_TYPE; j++) {
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 15:34:12 +03:00
if (le32_to_cpu(ckpt->cur_node_segno[i]) ==
le32_to_cpu(ckpt->cur_data_segno[j])) {
f2fs_err(sbi, "Node segment (%u) and Data segment (%u) has the same segno: %u",
i, j,
le32_to_cpu(ckpt->cur_node_segno[i]));
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 15:34:12 +03:00
return 1;
}
}
}
skip_cross:
f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-23 06:25:19 +03:00
sit_bitmap_size = le32_to_cpu(ckpt->sit_ver_bitmap_bytesize);
nat_bitmap_size = le32_to_cpu(ckpt->nat_ver_bitmap_bytesize);
if (sit_bitmap_size != ((sit_segs / 2) << log_blocks_per_seg) / 8 ||
nat_bitmap_size != ((nat_segs / 2) << log_blocks_per_seg) / 8) {
f2fs_err(sbi, "Wrong bitmap size: sit: %u, nat:%u",
sit_bitmap_size, nat_bitmap_size);
f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-23 06:25:19 +03:00
return 1;
}
f2fs: fix to do sanity check with cp_pack_start_sum After fuzzing, cp_pack_start_sum could be corrupted, so current log's summary info should be wrong due to loading incorrect summary block. Then, if segment's type in current log is exceeded NR_CURSEG_TYPE, it can lead accessing invalid dirty_i->dirty_segmap bitmap finally. Add sanity check for cp_pack_start_sum to fix this issue. https://bugzilla.kernel.org/show_bug.cgi?id=200419 - Reproduce - Kernel message (f2fs-dev w/ KASAN) [ 3117.578432] F2FS-fs (loop0): Invalid log blocks per segment (8) [ 3117.578445] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 3117.581364] F2FS-fs (loop0): invalid crc_offset: 30716 [ 3117.583564] WARNING: CPU: 1 PID: 1225 at fs/f2fs/checkpoint.c:90 __get_meta_page+0x448/0x4b0 [ 3117.583570] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.584014] CPU: 1 PID: 1225 Comm: mount Not tainted 4.17.0+ #1 [ 3117.584017] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.584022] RIP: 0010:__get_meta_page+0x448/0x4b0 [ 3117.584023] Code: 00 49 8d bc 24 84 00 00 00 e8 74 54 da ff 41 83 8c 24 84 00 00 00 08 4c 89 f6 4c 89 ef e8 c0 d9 95 00 48 89 ef e8 18 e3 00 00 <0f> 0b f0 80 4d 48 04 e9 0f fe ff ff 0f 0b 48 89 c7 48 89 04 24 e8 [ 3117.584072] RSP: 0018:ffff88018eb678c0 EFLAGS: 00010286 [ 3117.584082] RAX: ffff88018f0a6a78 RBX: ffffea0007a46600 RCX: ffffffff9314d1b2 [ 3117.584085] RDX: ffffffff00000001 RSI: 0000000000000000 RDI: ffff88018f0a6a98 [ 3117.584087] RBP: ffff88018ebe9980 R08: 0000000000000002 R09: 0000000000000001 [ 3117.584090] R10: 0000000000000001 R11: ffffed00326e4450 R12: ffff880193722200 [ 3117.584092] R13: ffff88018ebe9afc R14: 0000000000000206 R15: ffff88018eb67900 [ 3117.584096] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.584098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.584101] CR2: 00000000016f21b8 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.584112] Call Trace: [ 3117.584121] ? f2fs_set_meta_page_dirty+0x150/0x150 [ 3117.584127] ? f2fs_build_segment_manager+0xbf9/0x3190 [ 3117.584133] ? f2fs_npages_for_summary_flush+0x75/0x120 [ 3117.584145] f2fs_build_segment_manager+0xda8/0x3190 [ 3117.584151] ? f2fs_get_valid_checkpoint+0x298/0xa00 [ 3117.584156] ? f2fs_flush_sit_entries+0x10e0/0x10e0 [ 3117.584184] ? map_id_range_down+0x17c/0x1b0 [ 3117.584188] ? __put_user_ns+0x30/0x30 [ 3117.584206] ? find_next_bit+0x53/0x90 [ 3117.584237] ? cpumask_next+0x16/0x20 [ 3117.584249] f2fs_fill_super+0x1948/0x2b40 [ 3117.584258] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584279] ? sget_userns+0x65e/0x690 [ 3117.584296] ? set_blocksize+0x88/0x130 [ 3117.584302] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584305] mount_bdev+0x1c0/0x200 [ 3117.584310] mount_fs+0x5c/0x190 [ 3117.584320] vfs_kern_mount+0x64/0x190 [ 3117.584330] do_mount+0x2e4/0x1450 [ 3117.584343] ? lockref_put_return+0x130/0x130 [ 3117.584347] ? copy_mount_string+0x20/0x20 [ 3117.584357] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.584362] ? kasan_kmalloc+0xa6/0xd0 [ 3117.584373] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.584377] ? __kmalloc_track_caller+0x196/0x210 [ 3117.584383] ? _copy_from_user+0x61/0x90 [ 3117.584396] ? memdup_user+0x3e/0x60 [ 3117.584401] ksys_mount+0x7e/0xd0 [ 3117.584405] __x64_sys_mount+0x62/0x70 [ 3117.584427] do_syscall_64+0x73/0x160 [ 3117.584440] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.584455] RIP: 0033:0x7f5693f14b9a [ 3117.584456] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.584505] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.584510] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.584512] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.584514] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.584516] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.584519] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.584523] ---[ end trace a8e0d899985faf31 ]--- [ 3117.685663] F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix. [ 3117.685673] F2FS-fs (loop0): recover_data: ino = 2 (i_size: recover) recovered = 1, err = 0 [ 3117.685707] ================================================================== [ 3117.685955] BUG: KASAN: slab-out-of-bounds in __remove_dirty_segment+0xdd/0x1e0 [ 3117.686175] Read of size 8 at addr ffff88018f0a63d0 by task mount/1225 [ 3117.686477] CPU: 0 PID: 1225 Comm: mount Tainted: G W 4.17.0+ #1 [ 3117.686481] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.686483] Call Trace: [ 3117.686494] dump_stack+0x71/0xab [ 3117.686512] print_address_description+0x6b/0x290 [ 3117.686517] kasan_report+0x28e/0x390 [ 3117.686522] ? __remove_dirty_segment+0xdd/0x1e0 [ 3117.686527] __remove_dirty_segment+0xdd/0x1e0 [ 3117.686532] locate_dirty_segment+0x189/0x190 [ 3117.686538] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.686543] recover_data+0x703/0x2c20 [ 3117.686547] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.686553] ? ksys_mount+0x7e/0xd0 [ 3117.686564] ? policy_nodemask+0x1a/0x90 [ 3117.686567] ? policy_node+0x56/0x70 [ 3117.686571] ? add_fsync_inode+0xf0/0xf0 [ 3117.686592] ? blk_finish_plug+0x44/0x60 [ 3117.686597] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.686602] ? find_inode_fast+0xac/0xc0 [ 3117.686606] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.686618] ? __radix_tree_lookup+0x150/0x150 [ 3117.686633] ? dqget+0x670/0x670 [ 3117.686648] ? pagecache_get_page+0x29/0x410 [ 3117.686656] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.686660] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.686664] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.686670] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.686674] ? rb_insert_color+0x323/0x3d0 [ 3117.686678] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.686683] ? proc_register+0x153/0x1d0 [ 3117.686686] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.686695] ? f2fs_attr_store+0x50/0x50 [ 3117.686700] ? proc_create_single_data+0x52/0x60 [ 3117.686707] f2fs_fill_super+0x1d06/0x2b40 [ 3117.686728] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686735] ? sget_userns+0x65e/0x690 [ 3117.686740] ? set_blocksize+0x88/0x130 [ 3117.686745] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686748] mount_bdev+0x1c0/0x200 [ 3117.686753] mount_fs+0x5c/0x190 [ 3117.686758] vfs_kern_mount+0x64/0x190 [ 3117.686762] do_mount+0x2e4/0x1450 [ 3117.686769] ? lockref_put_return+0x130/0x130 [ 3117.686773] ? copy_mount_string+0x20/0x20 [ 3117.686777] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.686780] ? kasan_kmalloc+0xa6/0xd0 [ 3117.686786] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.686790] ? __kmalloc_track_caller+0x196/0x210 [ 3117.686795] ? _copy_from_user+0x61/0x90 [ 3117.686801] ? memdup_user+0x3e/0x60 [ 3117.686804] ksys_mount+0x7e/0xd0 [ 3117.686809] __x64_sys_mount+0x62/0x70 [ 3117.686816] do_syscall_64+0x73/0x160 [ 3117.686824] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.686829] RIP: 0033:0x7f5693f14b9a [ 3117.686830] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.686887] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.686892] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.686894] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.686896] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.686899] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.686901] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.687005] Allocated by task 1225: [ 3117.687152] kasan_kmalloc+0xa6/0xd0 [ 3117.687157] kmem_cache_alloc_trace+0xfd/0x200 [ 3117.687161] f2fs_build_segment_manager+0x2d09/0x3190 [ 3117.687165] f2fs_fill_super+0x1948/0x2b40 [ 3117.687168] mount_bdev+0x1c0/0x200 [ 3117.687171] mount_fs+0x5c/0x190 [ 3117.687174] vfs_kern_mount+0x64/0x190 [ 3117.687177] do_mount+0x2e4/0x1450 [ 3117.687180] ksys_mount+0x7e/0xd0 [ 3117.687182] __x64_sys_mount+0x62/0x70 [ 3117.687186] do_syscall_64+0x73/0x160 [ 3117.687190] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.687285] Freed by task 19: [ 3117.687412] __kasan_slab_free+0x137/0x190 [ 3117.687416] kfree+0x8b/0x1b0 [ 3117.687460] ttm_bo_man_put_node+0x61/0x80 [ttm] [ 3117.687476] ttm_bo_cleanup_refs+0x15f/0x250 [ttm] [ 3117.687492] ttm_bo_delayed_delete+0x2f0/0x300 [ttm] [ 3117.687507] ttm_bo_delayed_workqueue+0x17/0x50 [ttm] [ 3117.687528] process_one_work+0x2f9/0x740 [ 3117.687531] worker_thread+0x78/0x6b0 [ 3117.687541] kthread+0x177/0x1c0 [ 3117.687545] ret_from_fork+0x35/0x40 [ 3117.687638] The buggy address belongs to the object at ffff88018f0a6300 which belongs to the cache kmalloc-192 of size 192 [ 3117.688014] The buggy address is located 16 bytes to the right of 192-byte region [ffff88018f0a6300, ffff88018f0a63c0) [ 3117.688382] The buggy address belongs to the page: [ 3117.688554] page:ffffea00063c2980 count:1 mapcount:0 mapping:ffff8801f3403180 index:0x0 [ 3117.688788] flags: 0x17fff8000000100(slab) [ 3117.688944] raw: 017fff8000000100 ffffea00063c2840 0000000e0000000e ffff8801f3403180 [ 3117.689166] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 3117.689386] page dumped because: kasan: bad access detected [ 3117.689653] Memory state around the buggy address: [ 3117.689816] ffff88018f0a6280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3117.690027] ffff88018f0a6300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690239] >ffff88018f0a6380: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.690448] ^ [ 3117.690644] ffff88018f0a6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690868] ffff88018f0a6480: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.691077] ================================================================== [ 3117.691290] Disabling lock debugging due to kernel taint [ 3117.693893] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 3117.694120] PGD 80000001f01bc067 P4D 80000001f01bc067 PUD 1d9638067 PMD 0 [ 3117.694338] Oops: 0002 [#1] SMP KASAN PTI [ 3117.694490] CPU: 1 PID: 1225 Comm: mount Tainted: G B W 4.17.0+ #1 [ 3117.694703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.695073] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.695246] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.695793] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.695969] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.696182] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.696391] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.696604] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.696813] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.697032] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.697280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.702357] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.707235] Call Trace: [ 3117.712077] locate_dirty_segment+0x189/0x190 [ 3117.716891] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.721617] recover_data+0x703/0x2c20 [ 3117.726316] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.730957] ? ksys_mount+0x7e/0xd0 [ 3117.735573] ? policy_nodemask+0x1a/0x90 [ 3117.740198] ? policy_node+0x56/0x70 [ 3117.744829] ? add_fsync_inode+0xf0/0xf0 [ 3117.749487] ? blk_finish_plug+0x44/0x60 [ 3117.754152] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.758831] ? find_inode_fast+0xac/0xc0 [ 3117.763448] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.768046] ? __radix_tree_lookup+0x150/0x150 [ 3117.772603] ? dqget+0x670/0x670 [ 3117.777159] ? pagecache_get_page+0x29/0x410 [ 3117.781648] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.786067] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.790476] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.794790] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.799086] ? rb_insert_color+0x323/0x3d0 [ 3117.803304] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.807563] ? proc_register+0x153/0x1d0 [ 3117.811766] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.815947] ? f2fs_attr_store+0x50/0x50 [ 3117.820087] ? proc_create_single_data+0x52/0x60 [ 3117.824262] f2fs_fill_super+0x1d06/0x2b40 [ 3117.828367] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.832432] ? sget_userns+0x65e/0x690 [ 3117.836500] ? set_blocksize+0x88/0x130 [ 3117.840501] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.844420] mount_bdev+0x1c0/0x200 [ 3117.848275] mount_fs+0x5c/0x190 [ 3117.852053] vfs_kern_mount+0x64/0x190 [ 3117.855810] do_mount+0x2e4/0x1450 [ 3117.859441] ? lockref_put_return+0x130/0x130 [ 3117.862996] ? copy_mount_string+0x20/0x20 [ 3117.866417] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.869719] ? kasan_kmalloc+0xa6/0xd0 [ 3117.872948] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.876121] ? __kmalloc_track_caller+0x196/0x210 [ 3117.879333] ? _copy_from_user+0x61/0x90 [ 3117.882467] ? memdup_user+0x3e/0x60 [ 3117.885604] ksys_mount+0x7e/0xd0 [ 3117.888700] __x64_sys_mount+0x62/0x70 [ 3117.891742] do_syscall_64+0x73/0x160 [ 3117.894692] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.897669] RIP: 0033:0x7f5693f14b9a [ 3117.900563] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.906922] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.910159] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.913469] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.916764] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.920071] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.923393] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.926680] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.949979] CR2: 0000000000000000 [ 3117.954283] ---[ end trace a8e0d899985faf32 ]--- [ 3117.958575] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.962810] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.971789] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.976333] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.980926] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.985497] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.990098] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.994761] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.999392] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3118.004096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3118.008816] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 - Location https://elixir.bootlin.com/linux/v4.18-rc3/source/fs/f2fs/segment.c#L775 if (test_and_clear_bit(segno, dirty_i->dirty_segmap[t])) dirty_i->nr_dirty[t]--; Here dirty_i->dirty_segmap[t] can be NULL which leads to crash in test_and_clear_bit() Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 14:16:11 +03:00
cp_pack_start_sum = __start_sum_addr(sbi);
cp_payload = __cp_payload(sbi);
if (cp_pack_start_sum < cp_payload + 1 ||
cp_pack_start_sum > blocks_per_seg - 1 -
NR_CURSEG_PERSIST_TYPE) {
f2fs_err(sbi, "Wrong cp_pack_start_sum: %u",
cp_pack_start_sum);
f2fs: fix to do sanity check with cp_pack_start_sum After fuzzing, cp_pack_start_sum could be corrupted, so current log's summary info should be wrong due to loading incorrect summary block. Then, if segment's type in current log is exceeded NR_CURSEG_TYPE, it can lead accessing invalid dirty_i->dirty_segmap bitmap finally. Add sanity check for cp_pack_start_sum to fix this issue. https://bugzilla.kernel.org/show_bug.cgi?id=200419 - Reproduce - Kernel message (f2fs-dev w/ KASAN) [ 3117.578432] F2FS-fs (loop0): Invalid log blocks per segment (8) [ 3117.578445] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 3117.581364] F2FS-fs (loop0): invalid crc_offset: 30716 [ 3117.583564] WARNING: CPU: 1 PID: 1225 at fs/f2fs/checkpoint.c:90 __get_meta_page+0x448/0x4b0 [ 3117.583570] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.584014] CPU: 1 PID: 1225 Comm: mount Not tainted 4.17.0+ #1 [ 3117.584017] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.584022] RIP: 0010:__get_meta_page+0x448/0x4b0 [ 3117.584023] Code: 00 49 8d bc 24 84 00 00 00 e8 74 54 da ff 41 83 8c 24 84 00 00 00 08 4c 89 f6 4c 89 ef e8 c0 d9 95 00 48 89 ef e8 18 e3 00 00 <0f> 0b f0 80 4d 48 04 e9 0f fe ff ff 0f 0b 48 89 c7 48 89 04 24 e8 [ 3117.584072] RSP: 0018:ffff88018eb678c0 EFLAGS: 00010286 [ 3117.584082] RAX: ffff88018f0a6a78 RBX: ffffea0007a46600 RCX: ffffffff9314d1b2 [ 3117.584085] RDX: ffffffff00000001 RSI: 0000000000000000 RDI: ffff88018f0a6a98 [ 3117.584087] RBP: ffff88018ebe9980 R08: 0000000000000002 R09: 0000000000000001 [ 3117.584090] R10: 0000000000000001 R11: ffffed00326e4450 R12: ffff880193722200 [ 3117.584092] R13: ffff88018ebe9afc R14: 0000000000000206 R15: ffff88018eb67900 [ 3117.584096] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.584098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.584101] CR2: 00000000016f21b8 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.584112] Call Trace: [ 3117.584121] ? f2fs_set_meta_page_dirty+0x150/0x150 [ 3117.584127] ? f2fs_build_segment_manager+0xbf9/0x3190 [ 3117.584133] ? f2fs_npages_for_summary_flush+0x75/0x120 [ 3117.584145] f2fs_build_segment_manager+0xda8/0x3190 [ 3117.584151] ? f2fs_get_valid_checkpoint+0x298/0xa00 [ 3117.584156] ? f2fs_flush_sit_entries+0x10e0/0x10e0 [ 3117.584184] ? map_id_range_down+0x17c/0x1b0 [ 3117.584188] ? __put_user_ns+0x30/0x30 [ 3117.584206] ? find_next_bit+0x53/0x90 [ 3117.584237] ? cpumask_next+0x16/0x20 [ 3117.584249] f2fs_fill_super+0x1948/0x2b40 [ 3117.584258] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584279] ? sget_userns+0x65e/0x690 [ 3117.584296] ? set_blocksize+0x88/0x130 [ 3117.584302] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584305] mount_bdev+0x1c0/0x200 [ 3117.584310] mount_fs+0x5c/0x190 [ 3117.584320] vfs_kern_mount+0x64/0x190 [ 3117.584330] do_mount+0x2e4/0x1450 [ 3117.584343] ? lockref_put_return+0x130/0x130 [ 3117.584347] ? copy_mount_string+0x20/0x20 [ 3117.584357] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.584362] ? kasan_kmalloc+0xa6/0xd0 [ 3117.584373] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.584377] ? __kmalloc_track_caller+0x196/0x210 [ 3117.584383] ? _copy_from_user+0x61/0x90 [ 3117.584396] ? memdup_user+0x3e/0x60 [ 3117.584401] ksys_mount+0x7e/0xd0 [ 3117.584405] __x64_sys_mount+0x62/0x70 [ 3117.584427] do_syscall_64+0x73/0x160 [ 3117.584440] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.584455] RIP: 0033:0x7f5693f14b9a [ 3117.584456] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.584505] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.584510] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.584512] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.584514] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.584516] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.584519] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.584523] ---[ end trace a8e0d899985faf31 ]--- [ 3117.685663] F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix. [ 3117.685673] F2FS-fs (loop0): recover_data: ino = 2 (i_size: recover) recovered = 1, err = 0 [ 3117.685707] ================================================================== [ 3117.685955] BUG: KASAN: slab-out-of-bounds in __remove_dirty_segment+0xdd/0x1e0 [ 3117.686175] Read of size 8 at addr ffff88018f0a63d0 by task mount/1225 [ 3117.686477] CPU: 0 PID: 1225 Comm: mount Tainted: G W 4.17.0+ #1 [ 3117.686481] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.686483] Call Trace: [ 3117.686494] dump_stack+0x71/0xab [ 3117.686512] print_address_description+0x6b/0x290 [ 3117.686517] kasan_report+0x28e/0x390 [ 3117.686522] ? __remove_dirty_segment+0xdd/0x1e0 [ 3117.686527] __remove_dirty_segment+0xdd/0x1e0 [ 3117.686532] locate_dirty_segment+0x189/0x190 [ 3117.686538] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.686543] recover_data+0x703/0x2c20 [ 3117.686547] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.686553] ? ksys_mount+0x7e/0xd0 [ 3117.686564] ? policy_nodemask+0x1a/0x90 [ 3117.686567] ? policy_node+0x56/0x70 [ 3117.686571] ? add_fsync_inode+0xf0/0xf0 [ 3117.686592] ? blk_finish_plug+0x44/0x60 [ 3117.686597] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.686602] ? find_inode_fast+0xac/0xc0 [ 3117.686606] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.686618] ? __radix_tree_lookup+0x150/0x150 [ 3117.686633] ? dqget+0x670/0x670 [ 3117.686648] ? pagecache_get_page+0x29/0x410 [ 3117.686656] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.686660] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.686664] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.686670] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.686674] ? rb_insert_color+0x323/0x3d0 [ 3117.686678] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.686683] ? proc_register+0x153/0x1d0 [ 3117.686686] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.686695] ? f2fs_attr_store+0x50/0x50 [ 3117.686700] ? proc_create_single_data+0x52/0x60 [ 3117.686707] f2fs_fill_super+0x1d06/0x2b40 [ 3117.686728] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686735] ? sget_userns+0x65e/0x690 [ 3117.686740] ? set_blocksize+0x88/0x130 [ 3117.686745] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686748] mount_bdev+0x1c0/0x200 [ 3117.686753] mount_fs+0x5c/0x190 [ 3117.686758] vfs_kern_mount+0x64/0x190 [ 3117.686762] do_mount+0x2e4/0x1450 [ 3117.686769] ? lockref_put_return+0x130/0x130 [ 3117.686773] ? copy_mount_string+0x20/0x20 [ 3117.686777] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.686780] ? kasan_kmalloc+0xa6/0xd0 [ 3117.686786] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.686790] ? __kmalloc_track_caller+0x196/0x210 [ 3117.686795] ? _copy_from_user+0x61/0x90 [ 3117.686801] ? memdup_user+0x3e/0x60 [ 3117.686804] ksys_mount+0x7e/0xd0 [ 3117.686809] __x64_sys_mount+0x62/0x70 [ 3117.686816] do_syscall_64+0x73/0x160 [ 3117.686824] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.686829] RIP: 0033:0x7f5693f14b9a [ 3117.686830] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.686887] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.686892] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.686894] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.686896] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.686899] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.686901] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.687005] Allocated by task 1225: [ 3117.687152] kasan_kmalloc+0xa6/0xd0 [ 3117.687157] kmem_cache_alloc_trace+0xfd/0x200 [ 3117.687161] f2fs_build_segment_manager+0x2d09/0x3190 [ 3117.687165] f2fs_fill_super+0x1948/0x2b40 [ 3117.687168] mount_bdev+0x1c0/0x200 [ 3117.687171] mount_fs+0x5c/0x190 [ 3117.687174] vfs_kern_mount+0x64/0x190 [ 3117.687177] do_mount+0x2e4/0x1450 [ 3117.687180] ksys_mount+0x7e/0xd0 [ 3117.687182] __x64_sys_mount+0x62/0x70 [ 3117.687186] do_syscall_64+0x73/0x160 [ 3117.687190] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.687285] Freed by task 19: [ 3117.687412] __kasan_slab_free+0x137/0x190 [ 3117.687416] kfree+0x8b/0x1b0 [ 3117.687460] ttm_bo_man_put_node+0x61/0x80 [ttm] [ 3117.687476] ttm_bo_cleanup_refs+0x15f/0x250 [ttm] [ 3117.687492] ttm_bo_delayed_delete+0x2f0/0x300 [ttm] [ 3117.687507] ttm_bo_delayed_workqueue+0x17/0x50 [ttm] [ 3117.687528] process_one_work+0x2f9/0x740 [ 3117.687531] worker_thread+0x78/0x6b0 [ 3117.687541] kthread+0x177/0x1c0 [ 3117.687545] ret_from_fork+0x35/0x40 [ 3117.687638] The buggy address belongs to the object at ffff88018f0a6300 which belongs to the cache kmalloc-192 of size 192 [ 3117.688014] The buggy address is located 16 bytes to the right of 192-byte region [ffff88018f0a6300, ffff88018f0a63c0) [ 3117.688382] The buggy address belongs to the page: [ 3117.688554] page:ffffea00063c2980 count:1 mapcount:0 mapping:ffff8801f3403180 index:0x0 [ 3117.688788] flags: 0x17fff8000000100(slab) [ 3117.688944] raw: 017fff8000000100 ffffea00063c2840 0000000e0000000e ffff8801f3403180 [ 3117.689166] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 3117.689386] page dumped because: kasan: bad access detected [ 3117.689653] Memory state around the buggy address: [ 3117.689816] ffff88018f0a6280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3117.690027] ffff88018f0a6300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690239] >ffff88018f0a6380: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.690448] ^ [ 3117.690644] ffff88018f0a6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690868] ffff88018f0a6480: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.691077] ================================================================== [ 3117.691290] Disabling lock debugging due to kernel taint [ 3117.693893] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 3117.694120] PGD 80000001f01bc067 P4D 80000001f01bc067 PUD 1d9638067 PMD 0 [ 3117.694338] Oops: 0002 [#1] SMP KASAN PTI [ 3117.694490] CPU: 1 PID: 1225 Comm: mount Tainted: G B W 4.17.0+ #1 [ 3117.694703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.695073] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.695246] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.695793] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.695969] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.696182] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.696391] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.696604] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.696813] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.697032] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.697280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.702357] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.707235] Call Trace: [ 3117.712077] locate_dirty_segment+0x189/0x190 [ 3117.716891] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.721617] recover_data+0x703/0x2c20 [ 3117.726316] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.730957] ? ksys_mount+0x7e/0xd0 [ 3117.735573] ? policy_nodemask+0x1a/0x90 [ 3117.740198] ? policy_node+0x56/0x70 [ 3117.744829] ? add_fsync_inode+0xf0/0xf0 [ 3117.749487] ? blk_finish_plug+0x44/0x60 [ 3117.754152] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.758831] ? find_inode_fast+0xac/0xc0 [ 3117.763448] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.768046] ? __radix_tree_lookup+0x150/0x150 [ 3117.772603] ? dqget+0x670/0x670 [ 3117.777159] ? pagecache_get_page+0x29/0x410 [ 3117.781648] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.786067] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.790476] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.794790] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.799086] ? rb_insert_color+0x323/0x3d0 [ 3117.803304] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.807563] ? proc_register+0x153/0x1d0 [ 3117.811766] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.815947] ? f2fs_attr_store+0x50/0x50 [ 3117.820087] ? proc_create_single_data+0x52/0x60 [ 3117.824262] f2fs_fill_super+0x1d06/0x2b40 [ 3117.828367] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.832432] ? sget_userns+0x65e/0x690 [ 3117.836500] ? set_blocksize+0x88/0x130 [ 3117.840501] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.844420] mount_bdev+0x1c0/0x200 [ 3117.848275] mount_fs+0x5c/0x190 [ 3117.852053] vfs_kern_mount+0x64/0x190 [ 3117.855810] do_mount+0x2e4/0x1450 [ 3117.859441] ? lockref_put_return+0x130/0x130 [ 3117.862996] ? copy_mount_string+0x20/0x20 [ 3117.866417] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.869719] ? kasan_kmalloc+0xa6/0xd0 [ 3117.872948] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.876121] ? __kmalloc_track_caller+0x196/0x210 [ 3117.879333] ? _copy_from_user+0x61/0x90 [ 3117.882467] ? memdup_user+0x3e/0x60 [ 3117.885604] ksys_mount+0x7e/0xd0 [ 3117.888700] __x64_sys_mount+0x62/0x70 [ 3117.891742] do_syscall_64+0x73/0x160 [ 3117.894692] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.897669] RIP: 0033:0x7f5693f14b9a [ 3117.900563] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.906922] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.910159] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.913469] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.916764] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.920071] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.923393] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.926680] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.949979] CR2: 0000000000000000 [ 3117.954283] ---[ end trace a8e0d899985faf32 ]--- [ 3117.958575] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.962810] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.971789] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.976333] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.980926] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.985497] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.990098] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.994761] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.999392] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3118.004096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3118.008816] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 - Location https://elixir.bootlin.com/linux/v4.18-rc3/source/fs/f2fs/segment.c#L775 if (test_and_clear_bit(segno, dirty_i->dirty_segmap[t])) dirty_i->nr_dirty[t]--; Here dirty_i->dirty_segmap[t] can be NULL which leads to crash in test_and_clear_bit() Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 14:16:11 +03:00
return 1;
}
f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-23 06:25:19 +03:00
f2fs: fix to check layout on last valid checkpoint park As Ju Hyung reported: " I was semi-forced today to use the new kernel and test f2fs. My Ubuntu initramfs got a bit wonky and I had to boot into live CD and fix some stuffs. The live CD was using 4.15 kernel, and just mounting the f2fs partition there corrupted f2fs and my 4.19(with 5.1-rc1-4.19 f2fs-stable merged) refused to mount with "SIT is corrupted node" message. I used the latest f2fs-tools sent by Chao including "fsck.f2fs: fix to repair cp_loads blocks at correct position" It spit out 140M worth of output, but at least I didn't have to run it twice. Everything returned "Ok" in the 2nd run. The new log is at http://arter97.com/f2fs/final After fixing the image, I used my 4.19 kernel with 5.2-rc1-4.19 f2fs-stable merged and it mounted. But, I got this: [ 1.047791] F2FS-fs (nvme0n1p3): layout of large_nat_bitmap is deprecated, run fsck to repair, chksum_offset: 4092 [ 1.081307] F2FS-fs (nvme0n1p3): Found nat_bits in checkpoint [ 1.161520] F2FS-fs (nvme0n1p3): recover fsync data on readonly fs [ 1.162418] F2FS-fs (nvme0n1p3): Mounted with checkpoint version = 761c7e00 But after doing a reboot, the message is gone: [ 1.098423] F2FS-fs (nvme0n1p3): Found nat_bits in checkpoint [ 1.177771] F2FS-fs (nvme0n1p3): recover fsync data on readonly fs [ 1.178365] F2FS-fs (nvme0n1p3): Mounted with checkpoint version = 761c7eda I'm not exactly sure why the kernel detected that I'm still using the old layout on the first boot. Maybe fsck didn't fix it properly, or the check from the kernel is improper. " Although we have rebuild the old deprecated checkpoint with new layout during repair, we only repair last checkpoint park, the other old one is remained. Once the image was mounted, we will 1) sanity check layout and 2) decide which checkpoint park to use according to cp_ver. So that we will print reported message unnecessarily at step 1), to avoid it, we simply move layout check into f2fs_sanity_check_ckpt() after step 2). Reported-by: Park Ju Hyung <qkrwngud825@gmail.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-05-20 05:09:22 +03:00
if (__is_set_ckpt_flags(ckpt, CP_LARGE_NAT_BITMAP_FLAG) &&
le32_to_cpu(ckpt->checksum_offset) != CP_MIN_CHKSUM_OFFSET) {
f2fs_warn(sbi, "using deprecated layout of large_nat_bitmap, "
"please run fsck v1.13.0 or higher to repair, chksum_offset: %u, "
"fixed with patch: \"f2fs-tools: relocate chksum_offset for large_nat_bitmap feature\"",
le32_to_cpu(ckpt->checksum_offset));
f2fs: fix to check layout on last valid checkpoint park As Ju Hyung reported: " I was semi-forced today to use the new kernel and test f2fs. My Ubuntu initramfs got a bit wonky and I had to boot into live CD and fix some stuffs. The live CD was using 4.15 kernel, and just mounting the f2fs partition there corrupted f2fs and my 4.19(with 5.1-rc1-4.19 f2fs-stable merged) refused to mount with "SIT is corrupted node" message. I used the latest f2fs-tools sent by Chao including "fsck.f2fs: fix to repair cp_loads blocks at correct position" It spit out 140M worth of output, but at least I didn't have to run it twice. Everything returned "Ok" in the 2nd run. The new log is at http://arter97.com/f2fs/final After fixing the image, I used my 4.19 kernel with 5.2-rc1-4.19 f2fs-stable merged and it mounted. But, I got this: [ 1.047791] F2FS-fs (nvme0n1p3): layout of large_nat_bitmap is deprecated, run fsck to repair, chksum_offset: 4092 [ 1.081307] F2FS-fs (nvme0n1p3): Found nat_bits in checkpoint [ 1.161520] F2FS-fs (nvme0n1p3): recover fsync data on readonly fs [ 1.162418] F2FS-fs (nvme0n1p3): Mounted with checkpoint version = 761c7e00 But after doing a reboot, the message is gone: [ 1.098423] F2FS-fs (nvme0n1p3): Found nat_bits in checkpoint [ 1.177771] F2FS-fs (nvme0n1p3): recover fsync data on readonly fs [ 1.178365] F2FS-fs (nvme0n1p3): Mounted with checkpoint version = 761c7eda I'm not exactly sure why the kernel detected that I'm still using the old layout on the first boot. Maybe fsck didn't fix it properly, or the check from the kernel is improper. " Although we have rebuild the old deprecated checkpoint with new layout during repair, we only repair last checkpoint park, the other old one is remained. Once the image was mounted, we will 1) sanity check layout and 2) decide which checkpoint park to use according to cp_ver. So that we will print reported message unnecessarily at step 1), to avoid it, we simply move layout check into f2fs_sanity_check_ckpt() after step 2). Reported-by: Park Ju Hyung <qkrwngud825@gmail.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-05-20 05:09:22 +03:00
return 1;
}
nat_blocks = nat_segs << log_blocks_per_seg;
nat_bits_bytes = nat_blocks / BITS_PER_BYTE;
nat_bits_blocks = F2FS_BLK_ALIGN((nat_bits_bytes << 1) + 8);
if (__is_set_ckpt_flags(ckpt, CP_NAT_BITS_FLAG) &&
(cp_payload + F2FS_CP_PACKS +
NR_CURSEG_PERSIST_TYPE + nat_bits_blocks >= blocks_per_seg)) {
f2fs_warn(sbi, "Insane cp_payload: %u, nat_bits_blocks: %u)",
cp_payload, nat_bits_blocks);
return 1;
}
if (unlikely(f2fs_cp_error(sbi))) {
f2fs_err(sbi, "A bug case: need to run fsck");
return 1;
}
return 0;
}
static void init_sb_info(struct f2fs_sb_info *sbi)
{
struct f2fs_super_block *raw_super = sbi->raw_super;
int i;
sbi->log_sectors_per_block =
le32_to_cpu(raw_super->log_sectors_per_block);
sbi->log_blocksize = le32_to_cpu(raw_super->log_blocksize);
sbi->blocksize = BIT(sbi->log_blocksize);
sbi->log_blocks_per_seg = le32_to_cpu(raw_super->log_blocks_per_seg);
sbi->blocks_per_seg = BIT(sbi->log_blocks_per_seg);
sbi->segs_per_sec = le32_to_cpu(raw_super->segs_per_sec);
sbi->secs_per_zone = le32_to_cpu(raw_super->secs_per_zone);
sbi->total_sections = le32_to_cpu(raw_super->section_count);
sbi->total_node_count =
(le32_to_cpu(raw_super->segment_count_nat) / 2)
* sbi->blocks_per_seg * NAT_ENTRY_PER_BLOCK;
F2FS_ROOT_INO(sbi) = le32_to_cpu(raw_super->root_ino);
F2FS_NODE_INO(sbi) = le32_to_cpu(raw_super->node_ino);
F2FS_META_INO(sbi) = le32_to_cpu(raw_super->meta_ino);
sbi->cur_victim_sec = NULL_SECNO;
sbi->gc_mode = GC_NORMAL;
sbi->next_victim_seg[BG_GC] = NULL_SEGNO;
sbi->next_victim_seg[FG_GC] = NULL_SEGNO;
sbi->max_victim_search = DEF_MAX_VICTIM_SEARCH;
sbi->migration_granularity = sbi->segs_per_sec;
sbi->seq_file_ra_mul = MIN_RA_MUL;
sbi->max_fragment_chunk = DEF_FRAGMENT_SIZE;
sbi->max_fragment_hole = DEF_FRAGMENT_SIZE;
spin_lock_init(&sbi->gc_remaining_trials_lock);
atomic64_set(&sbi->current_atomic_write, 0);
sbi->dir_level = DEF_DIR_LEVEL;
sbi->interval_time[CP_TIME] = DEF_CP_INTERVAL;
sbi->interval_time[REQ_TIME] = DEF_IDLE_INTERVAL;
sbi->interval_time[DISCARD_TIME] = DEF_IDLE_INTERVAL;
sbi->interval_time[GC_TIME] = DEF_IDLE_INTERVAL;
sbi->interval_time[DISABLE_TIME] = DEF_DISABLE_INTERVAL;
sbi->interval_time[UMOUNT_DISCARD_TIMEOUT] =
DEF_UMOUNT_DISCARD_TIMEOUT;
clear_sbi_flag(sbi, SBI_NEED_FSCK);
for (i = 0; i < NR_COUNT_TYPE; i++)
atomic_set(&sbi->nr_pages[i], 0);
for (i = 0; i < META; i++)
atomic_set(&sbi->wb_sync_req[i], 0);
INIT_LIST_HEAD(&sbi->s_list);
mutex_init(&sbi->umount_mutex);
init_f2fs_rwsem(&sbi->io_order_lock);
spin_lock_init(&sbi->cp_lock);
sbi->dirty_device = 0;
spin_lock_init(&sbi->dev_lock);
init_f2fs_rwsem(&sbi->sb_lock);
init_f2fs_rwsem(&sbi->pin_sem);
}
static int init_percpu_info(struct f2fs_sb_info *sbi)
{
int err;
err = percpu_counter_init(&sbi->alloc_valid_block_count, 0, GFP_KERNEL);
if (err)
return err;
err = percpu_counter_init(&sbi->rf_node_block_count, 0, GFP_KERNEL);
if (err)
goto err_valid_block;
err = percpu_counter_init(&sbi->total_valid_inode_count, 0,
GFP_KERNEL);
if (err)
goto err_node_block;
return 0;
err_node_block:
percpu_counter_destroy(&sbi->rf_node_block_count);
err_valid_block:
percpu_counter_destroy(&sbi->alloc_valid_block_count);
return err;
}
#ifdef CONFIG_BLK_DEV_ZONED
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 15:56:56 +03:00
struct f2fs_report_zones_args {
struct f2fs_sb_info *sbi;
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 15:56:56 +03:00
struct f2fs_dev_info *dev;
};
static int f2fs_report_zone_cb(struct blk_zone *zone, unsigned int idx,
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 15:56:56 +03:00
void *data)
{
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 15:56:56 +03:00
struct f2fs_report_zones_args *rz_args = data;
block_t unusable_blocks = (zone->len - zone->capacity) >>
F2FS_LOG_SECTORS_PER_BLOCK;
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 15:56:56 +03:00
if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL)
return 0;
set_bit(idx, rz_args->dev->blkz_seq);
if (!rz_args->sbi->unusable_blocks_per_sec) {
rz_args->sbi->unusable_blocks_per_sec = unusable_blocks;
return 0;
}
if (rz_args->sbi->unusable_blocks_per_sec != unusable_blocks) {
f2fs_err(rz_args->sbi, "F2FS supports single zone capacity\n");
return -EINVAL;
}
return 0;
}
static int init_blkz_info(struct f2fs_sb_info *sbi, int devi)
{
struct block_device *bdev = FDEV(devi).bdev;
sector_t nr_sectors = bdev_nr_sectors(bdev);
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 15:56:56 +03:00
struct f2fs_report_zones_args rep_zone_arg;
u64 zone_sectors;
int ret;
if (!f2fs_sb_has_blkzoned(sbi))
return 0;
zone_sectors = bdev_zone_sectors(bdev);
if (!is_power_of_2(zone_sectors)) {
f2fs_err(sbi, "F2FS does not support non power of 2 zone sizes\n");
return -EINVAL;
}
if (sbi->blocks_per_blkz && sbi->blocks_per_blkz !=
SECTOR_TO_BLOCK(zone_sectors))
return -EINVAL;
sbi->blocks_per_blkz = SECTOR_TO_BLOCK(zone_sectors);
FDEV(devi).nr_blkz = div_u64(SECTOR_TO_BLOCK(nr_sectors),
sbi->blocks_per_blkz);
if (nr_sectors & (zone_sectors - 1))
FDEV(devi).nr_blkz++;
FDEV(devi).blkz_seq = f2fs_kvzalloc(sbi,
BITS_TO_LONGS(FDEV(devi).nr_blkz)
* sizeof(unsigned long),
GFP_KERNEL);
if (!FDEV(devi).blkz_seq)
return -ENOMEM;
rep_zone_arg.sbi = sbi;
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 15:56:56 +03:00
rep_zone_arg.dev = &FDEV(devi);
ret = blkdev_report_zones(bdev, 0, BLK_ALL_ZONES, f2fs_report_zone_cb,
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 15:56:56 +03:00
&rep_zone_arg);
if (ret < 0)
return ret;
return 0;
}
#endif
/*
* Read f2fs raw super block.
* Because we have two copies of super block, so read both of them
* to get the first valid one. If any one of them is broken, we pass
* them recovery flag back to the caller.
*/
static int read_raw_super_block(struct f2fs_sb_info *sbi,
struct f2fs_super_block **raw_super,
int *valid_super_block, int *recovery)
{
struct super_block *sb = sbi->sb;
int block;
struct buffer_head *bh;
struct f2fs_super_block *super;
int err = 0;
super = kzalloc(sizeof(struct f2fs_super_block), GFP_KERNEL);
if (!super)
return -ENOMEM;
for (block = 0; block < 2; block++) {
bh = sb_bread(sb, block);
if (!bh) {
f2fs_err(sbi, "Unable to read %dth superblock",
block + 1);
err = -EIO;
*recovery = 1;
continue;
}
/* sanity checking of raw super */
err = sanity_check_raw_super(sbi, bh);
if (err) {
f2fs_err(sbi, "Can't find valid F2FS filesystem in %dth superblock",
block + 1);
brelse(bh);
*recovery = 1;
continue;
}
if (!*raw_super) {
memcpy(super, bh->b_data + F2FS_SUPER_OFFSET,
sizeof(*super));
*valid_super_block = block;
*raw_super = super;
}
brelse(bh);
}
/* No valid superblock */
if (!*raw_super)
kfree(super);
else
err = 0;
return err;
}
int f2fs_commit_super(struct f2fs_sb_info *sbi, bool recover)
{
struct buffer_head *bh;
__u32 crc = 0;
int err;
if ((recover && f2fs_readonly(sbi->sb)) ||
f2fs_hw_is_readonly(sbi)) {
set_sbi_flag(sbi, SBI_NEED_SB_WRITE);
return -EROFS;
}
/* we should update superblock crc here */
if (!recover && f2fs_sb_has_sb_chksum(sbi)) {
crc = f2fs_crc32(sbi, F2FS_RAW_SUPER(sbi),
offsetof(struct f2fs_super_block, crc));
F2FS_RAW_SUPER(sbi)->crc = cpu_to_le32(crc);
}
/* write back-up superblock first */
bh = sb_bread(sbi->sb, sbi->valid_super_block ? 0 : 1);
if (!bh)
return -EIO;
err = __f2fs_commit_super(bh, F2FS_RAW_SUPER(sbi));
brelse(bh);
/* if we are in recovery path, skip writing valid superblock */
if (recover || err)
return err;
/* write current valid superblock */
bh = sb_bread(sbi->sb, sbi->valid_super_block);
if (!bh)
return -EIO;
err = __f2fs_commit_super(bh, F2FS_RAW_SUPER(sbi));
brelse(bh);
return err;
}
static void save_stop_reason(struct f2fs_sb_info *sbi, unsigned char reason)
{
unsigned long flags;
spin_lock_irqsave(&sbi->error_lock, flags);
if (sbi->stop_reason[reason] < GENMASK(BITS_PER_BYTE - 1, 0))
sbi->stop_reason[reason]++;
spin_unlock_irqrestore(&sbi->error_lock, flags);
}
static void f2fs_record_stop_reason(struct f2fs_sb_info *sbi)
{
struct f2fs_super_block *raw_super = F2FS_RAW_SUPER(sbi);
unsigned long flags;
int err;
f2fs_down_write(&sbi->sb_lock);
spin_lock_irqsave(&sbi->error_lock, flags);
if (sbi->error_dirty) {
memcpy(F2FS_RAW_SUPER(sbi)->s_errors, sbi->errors,
MAX_F2FS_ERRORS);
sbi->error_dirty = false;
}
memcpy(raw_super->s_stop_reason, sbi->stop_reason, MAX_STOP_REASON);
spin_unlock_irqrestore(&sbi->error_lock, flags);
err = f2fs_commit_super(sbi, false);
f2fs_up_write(&sbi->sb_lock);
if (err)
f2fs_err(sbi, "f2fs_commit_super fails to record err:%d", err);
}
f2fs: fix scheduling while atomic in decompression path [ 16.945668][ C0] Call trace: [ 16.945678][ C0] dump_backtrace+0x110/0x204 [ 16.945706][ C0] dump_stack_lvl+0x84/0xbc [ 16.945735][ C0] __schedule_bug+0xb8/0x1ac [ 16.945756][ C0] __schedule+0x724/0xbdc [ 16.945778][ C0] schedule+0x154/0x258 [ 16.945793][ C0] bit_wait_io+0x48/0xa4 [ 16.945808][ C0] out_of_line_wait_on_bit+0x114/0x198 [ 16.945824][ C0] __sync_dirty_buffer+0x1f8/0x2e8 [ 16.945853][ C0] __f2fs_commit_super+0x140/0x1f4 [ 16.945881][ C0] f2fs_commit_super+0x110/0x28c [ 16.945898][ C0] f2fs_handle_error+0x1f4/0x2f4 [ 16.945917][ C0] f2fs_decompress_cluster+0xc4/0x450 [ 16.945942][ C0] f2fs_end_read_compressed_page+0xc0/0xfc [ 16.945959][ C0] f2fs_handle_step_decompress+0x118/0x1cc [ 16.945978][ C0] f2fs_read_end_io+0x168/0x2b0 [ 16.945993][ C0] bio_endio+0x25c/0x2c8 [ 16.946015][ C0] dm_io_dec_pending+0x3e8/0x57c [ 16.946052][ C0] clone_endio+0x134/0x254 [ 16.946069][ C0] bio_endio+0x25c/0x2c8 [ 16.946084][ C0] blk_update_request+0x1d4/0x478 [ 16.946103][ C0] scsi_end_request+0x38/0x4cc [ 16.946129][ C0] scsi_io_completion+0x94/0x184 [ 16.946147][ C0] scsi_finish_command+0xe8/0x154 [ 16.946164][ C0] scsi_complete+0x90/0x1d8 [ 16.946181][ C0] blk_done_softirq+0xa4/0x11c [ 16.946198][ C0] _stext+0x184/0x614 [ 16.946214][ C0] __irq_exit_rcu+0x78/0x144 [ 16.946234][ C0] handle_domain_irq+0xd4/0x154 [ 16.946260][ C0] gic_handle_irq.33881+0x5c/0x27c [ 16.946281][ C0] call_on_irq_stack+0x40/0x70 [ 16.946298][ C0] do_interrupt_handler+0x48/0xa4 [ 16.946313][ C0] el1_interrupt+0x38/0x68 [ 16.946346][ C0] el1h_64_irq_handler+0x20/0x30 [ 16.946362][ C0] el1h_64_irq+0x78/0x7c [ 16.946377][ C0] finish_task_switch+0xc8/0x3d8 [ 16.946394][ C0] __schedule+0x600/0xbdc [ 16.946408][ C0] preempt_schedule_common+0x34/0x5c [ 16.946423][ C0] preempt_schedule+0x44/0x48 [ 16.946438][ C0] process_one_work+0x30c/0x550 [ 16.946456][ C0] worker_thread+0x414/0x8bc [ 16.946472][ C0] kthread+0x16c/0x1e0 [ 16.946486][ C0] ret_from_fork+0x10/0x20 Fixes: bff139b49d9f ("f2fs: handle decompress only post processing in softirq") Fixes: 95fa90c9e5a7 ("f2fs: support recording errors into superblock") Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-03-24 01:37:54 +03:00
void f2fs_save_errors(struct f2fs_sb_info *sbi, unsigned char flag)
{
unsigned long flags;
spin_lock_irqsave(&sbi->error_lock, flags);
if (!test_bit(flag, (unsigned long *)sbi->errors)) {
set_bit(flag, (unsigned long *)sbi->errors);
sbi->error_dirty = true;
}
spin_unlock_irqrestore(&sbi->error_lock, flags);
}
static bool f2fs_update_errors(struct f2fs_sb_info *sbi)
{
unsigned long flags;
bool need_update = false;
spin_lock_irqsave(&sbi->error_lock, flags);
if (sbi->error_dirty) {
memcpy(F2FS_RAW_SUPER(sbi)->s_errors, sbi->errors,
MAX_F2FS_ERRORS);
sbi->error_dirty = false;
need_update = true;
}
spin_unlock_irqrestore(&sbi->error_lock, flags);
return need_update;
}
static void f2fs_record_errors(struct f2fs_sb_info *sbi, unsigned char error)
{
int err;
f2fs_down_write(&sbi->sb_lock);
if (!f2fs_update_errors(sbi))
goto out_unlock;
err = f2fs_commit_super(sbi, false);
if (err)
f2fs_err(sbi, "f2fs_commit_super fails to record errors:%u, err:%d",
error, err);
out_unlock:
f2fs_up_write(&sbi->sb_lock);
}
void f2fs_handle_error(struct f2fs_sb_info *sbi, unsigned char error)
{
f2fs_save_errors(sbi, error);
f2fs_record_errors(sbi, error);
}
void f2fs_handle_error_async(struct f2fs_sb_info *sbi, unsigned char error)
{
f2fs_save_errors(sbi, error);
if (!sbi->error_dirty)
return;
if (!test_bit(error, (unsigned long *)sbi->errors))
return;
schedule_work(&sbi->s_error_work);
}
static bool system_going_down(void)
{
return system_state == SYSTEM_HALT || system_state == SYSTEM_POWER_OFF
|| system_state == SYSTEM_RESTART;
}
void f2fs_handle_critical_error(struct f2fs_sb_info *sbi, unsigned char reason,
bool irq_context)
{
struct super_block *sb = sbi->sb;
bool shutdown = reason == STOP_CP_REASON_SHUTDOWN;
bool continue_fs = !shutdown &&
F2FS_OPTION(sbi).errors == MOUNT_ERRORS_CONTINUE;
set_ckpt_flags(sbi, CP_ERROR_FLAG);
if (!f2fs_hw_is_readonly(sbi)) {
save_stop_reason(sbi, reason);
if (irq_context && !shutdown)
schedule_work(&sbi->s_error_work);
else
f2fs_record_stop_reason(sbi);
}
/*
* We force ERRORS_RO behavior when system is rebooting. Otherwise we
* could panic during 'reboot -f' as the underlying device got already
* disabled.
*/
if (F2FS_OPTION(sbi).errors == MOUNT_ERRORS_PANIC &&
!shutdown && !system_going_down() &&
!is_sbi_flag_set(sbi, SBI_IS_SHUTDOWN))
panic("F2FS-fs (device %s): panic forced after error\n",
sb->s_id);
if (shutdown)
set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
/* continue filesystem operators if errors=continue */
if (continue_fs || f2fs_readonly(sb))
return;
f2fs_warn(sbi, "Remounting filesystem read-only");
/*
* Make sure updated value of ->s_mount_flags will be visible before
* ->s_flags update
*/
smp_wmb();
sb->s_flags |= SB_RDONLY;
}
static void f2fs_record_error_work(struct work_struct *work)
{
struct f2fs_sb_info *sbi = container_of(work,
struct f2fs_sb_info, s_error_work);
f2fs_record_stop_reason(sbi);
}
static int f2fs_scan_devices(struct f2fs_sb_info *sbi)
{
struct f2fs_super_block *raw_super = F2FS_RAW_SUPER(sbi);
unsigned int max_devices = MAX_DEVICES;
unsigned int logical_blksize;
int i;
/* Initialize single device information */
if (!RDEV(0).path[0]) {
if (!bdev_is_zoned(sbi->sb->s_bdev))
return 0;
max_devices = 1;
}
/*
* Initialize multiple devices information, or single
* zoned block device information.
*/
treewide: Use array_size() in f2fs_kzalloc() The f2fs_kzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: f2fs_kzalloc(handle, a * b, gfp) with: f2fs_kzalloc(handle, array_size(a, b), gfp) as well as handling cases of: f2fs_kzalloc(handle, a * b * c, gfp) with: f2fs_kzalloc(handle, array3_size(a, b, c), gfp) This does, however, attempt to ignore constant size factors like: f2fs_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( f2fs_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | f2fs_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( f2fs_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( f2fs_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ f2fs_kzalloc(HANDLE, - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( f2fs_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( f2fs_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( f2fs_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( f2fs_kzalloc(HANDLE, C1 * C2 * C3, ...) | f2fs_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression HANDLE; expression E1, E2; constant C1, C2; @@ ( f2fs_kzalloc(HANDLE, C1 * C2, ...) | f2fs_kzalloc(HANDLE, - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 00:28:23 +03:00
sbi->devs = f2fs_kzalloc(sbi,
array_size(max_devices,
sizeof(struct f2fs_dev_info)),
GFP_KERNEL);
if (!sbi->devs)
return -ENOMEM;
logical_blksize = bdev_logical_block_size(sbi->sb->s_bdev);
sbi->aligned_blksize = true;
for (i = 0; i < max_devices; i++) {
if (i > 0 && !RDEV(i).path[0])
break;
if (max_devices == 1) {
/* Single zoned block device mount */
FDEV(0).bdev =
blkdev_get_by_dev(sbi->sb->s_bdev->bd_dev,
sbi->sb->s_mode, sbi->sb->s_type);
} else {
/* Multi-device mount */
memcpy(FDEV(i).path, RDEV(i).path, MAX_PATH_LEN);
FDEV(i).total_segments =
le32_to_cpu(RDEV(i).total_segments);
if (i == 0) {
FDEV(i).start_blk = 0;
FDEV(i).end_blk = FDEV(i).start_blk +
(FDEV(i).total_segments <<
sbi->log_blocks_per_seg) - 1 +
le32_to_cpu(raw_super->segment0_blkaddr);
} else {
FDEV(i).start_blk = FDEV(i - 1).end_blk + 1;
FDEV(i).end_blk = FDEV(i).start_blk +
(FDEV(i).total_segments <<
sbi->log_blocks_per_seg) - 1;
}
FDEV(i).bdev = blkdev_get_by_path(FDEV(i).path,
sbi->sb->s_mode, sbi->sb->s_type);
}
if (IS_ERR(FDEV(i).bdev))
return PTR_ERR(FDEV(i).bdev);
/* to release errored devices */
sbi->s_ndevs = i + 1;
if (logical_blksize != bdev_logical_block_size(FDEV(i).bdev))
sbi->aligned_blksize = false;
#ifdef CONFIG_BLK_DEV_ZONED
if (bdev_zoned_model(FDEV(i).bdev) == BLK_ZONED_HM &&
!f2fs_sb_has_blkzoned(sbi)) {
f2fs_err(sbi, "Zoned block device feature not enabled");
return -EINVAL;
}
if (bdev_zoned_model(FDEV(i).bdev) != BLK_ZONED_NONE) {
if (init_blkz_info(sbi, i)) {
f2fs_err(sbi, "Failed to initialize F2FS blkzone information");
return -EINVAL;
}
if (max_devices == 1)
break;
f2fs_info(sbi, "Mount Device [%2d]: %20s, %8u, %8x - %8x (zone: %s)",
i, FDEV(i).path,
FDEV(i).total_segments,
FDEV(i).start_blk, FDEV(i).end_blk,
bdev_zoned_model(FDEV(i).bdev) == BLK_ZONED_HA ?
"Host-aware" : "Host-managed");
continue;
}
#endif
f2fs_info(sbi, "Mount Device [%2d]: %20s, %8u, %8x - %8x",
i, FDEV(i).path,
FDEV(i).total_segments,
FDEV(i).start_blk, FDEV(i).end_blk);
}
f2fs_info(sbi,
"IO Block Size: %8ld KB", F2FS_IO_SIZE_KB(sbi));
return 0;
}
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
static int f2fs_setup_casefold(struct f2fs_sb_info *sbi)
{
#if IS_ENABLED(CONFIG_UNICODE)
if (f2fs_sb_has_casefold(sbi) && !sbi->sb->s_encoding) {
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
const struct f2fs_sb_encodings *encoding_info;
struct unicode_map *encoding;
__u16 encoding_flags;
encoding_info = f2fs_sb_read_encoding(sbi->raw_super);
if (!encoding_info) {
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
f2fs_err(sbi,
"Encoding requested by superblock is unknown");
return -EINVAL;
}
encoding_flags = le16_to_cpu(sbi->raw_super->s_encoding_flags);
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
encoding = utf8_load(encoding_info->version);
if (IS_ERR(encoding)) {
f2fs_err(sbi,
"can't mount with superblock charset: %s-%u.%u.%u "
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
"not supported by the kernel. flags: 0x%x.",
encoding_info->name,
unicode_major(encoding_info->version),
unicode_minor(encoding_info->version),
unicode_rev(encoding_info->version),
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
encoding_flags);
return PTR_ERR(encoding);
}
f2fs_info(sbi, "Using encoding defined by superblock: "
"%s-%u.%u.%u with flags 0x%hx", encoding_info->name,
unicode_major(encoding_info->version),
unicode_minor(encoding_info->version),
unicode_rev(encoding_info->version),
encoding_flags);
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
sbi->sb->s_encoding = encoding;
sbi->sb->s_encoding_flags = encoding_flags;
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
}
#else
if (f2fs_sb_has_casefold(sbi)) {
f2fs_err(sbi, "Filesystem with casefold feature cannot be mounted without CONFIG_UNICODE");
return -EINVAL;
}
#endif
return 0;
}
static void f2fs_tuning_parameters(struct f2fs_sb_info *sbi)
{
/* adjust parameters according to the volume size */
if (MAIN_SEGS(sbi) <= SMALL_VOLUME_SEGMENTS) {
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 03:15:43 +03:00
if (f2fs_block_unit_discard(sbi))
SM_I(sbi)->dcc_info->discard_granularity =
MIN_DISCARD_GRANULARITY;
if (!f2fs_lfs_mode(sbi))
SM_I(sbi)->ipu_policy = BIT(F2FS_IPU_FORCE) |
BIT(F2FS_IPU_HONOR_OPU_WRITE);
}
sbi->readdir_ra = true;
}
static int f2fs_fill_super(struct super_block *sb, void *data, int silent)
{
struct f2fs_sb_info *sbi;
struct f2fs_super_block *raw_super;
struct inode *root;
int err;
bool skip_recovery = false, need_fsck = false;
char *options = NULL;
int recovery, i, valid_super_block;
struct curseg_info *seg_i;
int retry_cnt = 1;
#ifdef CONFIG_QUOTA
bool quota_enabled = false;
#endif
try_onemore:
err = -EINVAL;
raw_super = NULL;
valid_super_block = -1;
recovery = 0;
/* allocate memory for f2fs-specific super block info */
sbi = kzalloc(sizeof(struct f2fs_sb_info), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
sbi->sb = sb;
/* initialize locks within allocated memory */
init_f2fs_rwsem(&sbi->gc_lock);
mutex_init(&sbi->writepages);
init_f2fs_rwsem(&sbi->cp_global_sem);
init_f2fs_rwsem(&sbi->node_write);
init_f2fs_rwsem(&sbi->node_change);
spin_lock_init(&sbi->stat_lock);
init_f2fs_rwsem(&sbi->cp_rwsem);
init_f2fs_rwsem(&sbi->quota_sem);
init_waitqueue_head(&sbi->cp_wait);
spin_lock_init(&sbi->error_lock);
for (i = 0; i < NR_INODE_TYPE; i++) {
INIT_LIST_HEAD(&sbi->inode_list[i]);
spin_lock_init(&sbi->inode_lock[i]);
}
mutex_init(&sbi->flush_lock);
/* Load the checksum driver */
sbi->s_chksum_driver = crypto_alloc_shash("crc32", 0, 0);
if (IS_ERR(sbi->s_chksum_driver)) {
f2fs_err(sbi, "Cannot load crc32 driver.");
err = PTR_ERR(sbi->s_chksum_driver);
sbi->s_chksum_driver = NULL;
goto free_sbi;
}
/* set a block size */
if (unlikely(!sb_set_blocksize(sb, F2FS_BLKSIZE))) {
f2fs_err(sbi, "unable to set blocksize");
goto free_sbi;
}
err = read_raw_super_block(sbi, &raw_super, &valid_super_block,
&recovery);
if (err)
goto free_sbi;
sb->s_fs_info = sbi;
sbi->raw_super = raw_super;
INIT_WORK(&sbi->s_error_work, f2fs_record_error_work);
memcpy(sbi->errors, raw_super->s_errors, MAX_F2FS_ERRORS);
memcpy(sbi->stop_reason, raw_super->s_stop_reason, MAX_STOP_REASON);
/* precompute checksum seed for metadata */
if (f2fs_sb_has_inode_chksum(sbi))
sbi->s_chksum_seed = f2fs_chksum(sbi, ~0, raw_super->uuid,
sizeof(raw_super->uuid));
f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) Cc: <stable@vger.kernel.org> Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-23 06:58:22 +03:00
default_options(sbi, false);
/* parse mount options */
options = kstrdup((const char *)data, GFP_KERNEL);
if (data && !options) {
err = -ENOMEM;
goto free_sb_buf;
}
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-13 02:32:50 +03:00
err = parse_options(sb, options, false);
if (err)
goto free_options;
sb->s_maxbytes = max_file_blocks(NULL) <<
le32_to_cpu(raw_super->log_blocksize);
sb->s_max_links = F2FS_LINK_MAX;
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
err = f2fs_setup_casefold(sbi);
if (err)
goto free_options;
#ifdef CONFIG_QUOTA
sb->dq_op = &f2fs_quota_operations;
sb->s_qcop = &f2fs_quotactl_ops;
sb->s_quota_types = QTYPE_MASK_USR | QTYPE_MASK_GRP | QTYPE_MASK_PRJ;
if (f2fs_sb_has_quota_ino(sbi)) {
for (i = 0; i < MAXQUOTAS; i++) {
if (f2fs_qf_ino(sbi->sb, i))
sbi->nquota_files++;
}
}
#endif
sb->s_op = &f2fs_sops;
#ifdef CONFIG_FS_ENCRYPTION
sb->s_cop = &f2fs_cryptops;
f2fs: add fs-verity support Add fs-verity support to f2fs. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. The f2fs support for fs-verity consists of: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->readpages() to verify data as it's read from verity files and to support reading verity metadata pages. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). Like ext4, f2fs stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by f2fs with only some relatively small changes to f2fs. Extended attributes cannot be used because (a) f2fs limits the total size of an inode's xattr entries to 4096 bytes, which wouldn't be enough for even a single Merkle tree block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity metadata *must* be encrypted when the file is because it contains hashes of the plaintext data. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 19:26:24 +03:00
#endif
#ifdef CONFIG_FS_VERITY
sb->s_vop = &f2fs_verityops;
#endif
sb->s_xattr = f2fs_xattr_handlers;
sb->s_export_op = &f2fs_export_ops;
sb->s_magic = F2FS_SUPER_MAGIC;
sb->s_time_gran = 1;
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 00:05:09 +03:00
sb->s_flags = (sb->s_flags & ~SB_POSIXACL) |
(test_opt(sbi, POSIX_ACL) ? SB_POSIXACL : 0);
memcpy(&sb->s_uuid, raw_super->uuid, sizeof(raw_super->uuid));
sb->s_iflags |= SB_I_CGROUPWB;
/* init f2fs-specific super block info */
sbi->valid_super_block = valid_super_block;
/* disallow all the data/node/meta page writes */
set_sbi_flag(sbi, SBI_POR_DOING);
err = f2fs_init_write_merge_io(sbi);
if (err)
goto free_bio_info;
init_sb_info(sbi);
err = f2fs_init_iostat(sbi);
if (err)
goto free_bio_info;
err = init_percpu_info(sbi);
if (err)
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 01:29:09 +03:00
goto free_iostat;
if (F2FS_IO_ALIGNED(sbi)) {
sbi->write_io_dummy =
mempool_create_page_pool(2 * (F2FS_IO_SIZE(sbi) - 1), 0);
if (!sbi->write_io_dummy) {
err = -ENOMEM;
goto free_percpu;
}
}
/* init per sbi slab cache */
err = f2fs_init_xattr_caches(sbi);
if (err)
goto free_io_dummy;
err = f2fs_init_page_array_cache(sbi);
if (err)
goto free_xattr_cache;
/* get an inode for meta space */
sbi->meta_inode = f2fs_iget(sb, F2FS_META_INO(sbi));
if (IS_ERR(sbi->meta_inode)) {
f2fs_err(sbi, "Failed to read F2FS meta data inode");
err = PTR_ERR(sbi->meta_inode);
goto free_page_array_cache;
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_get_valid_checkpoint(sbi);
if (err) {
f2fs_err(sbi, "Failed to get valid F2FS checkpoint");
goto free_meta_inode;
}
if (__is_set_ckpt_flags(F2FS_CKPT(sbi), CP_QUOTA_NEED_FSCK_FLAG))
set_sbi_flag(sbi, SBI_QUOTA_NEED_REPAIR);
if (__is_set_ckpt_flags(F2FS_CKPT(sbi), CP_DISABLED_QUICK_FLAG)) {
set_sbi_flag(sbi, SBI_CP_DISABLED_QUICK);
sbi->interval_time[DISABLE_TIME] = DEF_DISABLE_QUICK_INTERVAL;
}
f2fs: ioctl for removing a range from F2FS This ioctl shrinks a given length (aligned to sections) from end of the main area. Any cursegs and valid blocks will be moved out before invalidating the range. This feature can be used for adjusting partition sizes online. History of the patch: Sahitya Tummala: - Add this ioctl for f2fs_compat_ioctl() as well. - Fix debugfs status to reflect the online resize changes. - Fix potential race between online resize path and allocate new data block path or gc path. Others: - Rename some identifiers. - Add some error handling branches. - Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range. - Implement this interface as ext4's, and change the parameter from shrunk bytes to new block count of F2FS. - During resizing, force to empty sit_journal and forbid adding new entries to it, in order to avoid invalid segno in journal after resize. - Reduce sbi->user_block_count before resize starts. - Commit the updated superblock first, and then update in-memory metadata only when the former succeeds. - Target block count must align to sections. - Write checkpoint before and after committing the new superblock, w/o CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if resize fails after the new superblock is committed. - In free_segment_range(), reduce granularity of gc_mutex. - Add protection on curseg migration. - Add freeze_bdev() and thaw_bdev() for resize fs. - Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation. - Recover super_block and FS metadata when resize fails. - No need to clear CP_FSCK_FLAG in update_ckpt_flags(). - Clean up the sb and fs metadata update functions for resize_fs. Geert Uytterhoeven: - Use div_u64*() for 64-bit divisions Arnd Bergmann: - Not all architectures support get_user() with a 64-bit argument: ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined! Use copy_from_user() here, this will always work. Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-05 06:33:25 +03:00
if (__is_set_ckpt_flags(F2FS_CKPT(sbi), CP_FSCK_FLAG))
set_sbi_flag(sbi, SBI_NEED_FSCK);
/* Initialize device list */
err = f2fs_scan_devices(sbi);
if (err) {
f2fs_err(sbi, "Failed to find devices");
goto free_devices;
}
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 13:07:14 +03:00
err = f2fs_init_post_read_wq(sbi);
if (err) {
f2fs_err(sbi, "Failed to initialize post read workqueue");
goto free_devices;
}
sbi->total_valid_node_count =
le32_to_cpu(sbi->ckpt->valid_node_count);
percpu_counter_set(&sbi->total_valid_inode_count,
le32_to_cpu(sbi->ckpt->valid_inode_count));
sbi->user_block_count = le64_to_cpu(sbi->ckpt->user_block_count);
sbi->total_valid_block_count =
le64_to_cpu(sbi->ckpt->valid_block_count);
sbi->last_valid_block_count = sbi->total_valid_block_count;
sbi->reserved_blocks = 0;
sbi->current_reserved_blocks = 0;
limit_reserve_root(sbi);
adjust_unusable_cap_perc(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_init_extent_cache_info(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_init_ino_entry_info(sbi);
f2fs: fix to avoid broken of dnode block list f2fs recovery flow is relying on dnode block link list, it means fsynced file recovery depends on previous dnode's persistence in the list, so during fsync() we should wait on all regular inode's dnode writebacked before issuing flush. By this way, we can avoid dnode block list being broken by out-of-order IO submission due to IO scheduler or driver. Sheng Yong helps to do the test with this patch: Target:/data (f2fs, -) 64MB / 32768KB / 4KB / 8 1 / PERSIST / Index Base: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08 2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7 3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48 Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333 After: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 798.81 202.5 41143 40613.87 602.71 838.08 913.83 2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27 3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91 Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333 Patched/Original: 0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189 It looks like atomic write will suffer performance regression. I suspect that the criminal is that we forcing to wait all dnode being in storage cache before we issue PREFLUSH+FUA. BTW, will commit ("f2fs: don't need to wait for node writes for atomic write") cause the problem: we will lose data of last transaction after SPO, even if atomic write return no error: - atomic_open(); - write() P1, P2, P3; - atomic_commit(); - writeback data: P1, P2, P3; - writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing last transaction. - preflush + fua; - power-cut If we don't wait dnode writeback for atomic_write: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85 2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77 3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92 Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18 Patched/Original: 0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294 SQLite's performance recovers. Jaegeuk: "Practically, I don't see db corruption becase of this. We can excuse to lose the last transaction." Finally, we decide to keep original implementation of atomic write interface sematics that we don't wait all dnode writeback before preflush+fua submission. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
f2fs_init_fsync_node_info(sbi);
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 03:00:42 +03:00
/* setup checkpoint request control and start checkpoint issue thread */
f2fs_init_ckpt_req_control(sbi);
if (!f2fs_readonly(sb) && !test_opt(sbi, DISABLE_CHECKPOINT) &&
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 03:00:42 +03:00
test_opt(sbi, MERGE_CHECKPOINT)) {
err = f2fs_start_ckpt_thread(sbi);
if (err) {
f2fs_err(sbi,
"Failed to start F2FS issue_checkpoint_thread (%d)",
err);
goto stop_ckpt_thread;
}
}
/* setup f2fs internal modules */
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_build_segment_manager(sbi);
if (err) {
f2fs_err(sbi, "Failed to initialize F2FS segment manager (%d)",
err);
goto free_sm;
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_build_node_manager(sbi);
if (err) {
f2fs_err(sbi, "Failed to initialize F2FS node manager (%d)",
err);
goto free_nm;
}
f2fs: fix to reserve space for IO align feature https://bugzilla.kernel.org/show_bug.cgi?id=204137 With below script, we will hit panic during new segment allocation: DISK=bingo.img MOUNT_DIR=/mnt/f2fs dd if=/dev/zero of=$DISK bs=1M count=105 mkfs.f2fe -a 1 -o 19 -t 1 -z 1 -f -q $DISK mount -t f2fs $DISK $MOUNT_DIR -o "noinline_dentry,flush_merge,noextent_cache,mode=lfs,io_bits=7,fsync_mode=strict" for (( i = 0; i < 4096; i++ )); do name=`head /dev/urandom | tr -dc A-Za-z0-9 | head -c 10` mkdir $MOUNT_DIR/$name done umount $MOUNT_DIR rm $DISK --- Core dump --- Call Trace: allocate_segment_by_default+0x9d/0x100 [f2fs] f2fs_allocate_data_block+0x3c0/0x5c0 [f2fs] do_write_page+0x62/0x110 [f2fs] f2fs_outplace_write_data+0x43/0xc0 [f2fs] f2fs_do_write_data_page+0x386/0x560 [f2fs] __write_data_page+0x706/0x850 [f2fs] f2fs_write_cache_pages+0x267/0x6a0 [f2fs] f2fs_write_data_pages+0x19c/0x2e0 [f2fs] do_writepages+0x1c/0x70 __filemap_fdatawrite_range+0xaa/0xe0 filemap_fdatawrite+0x1f/0x30 f2fs_sync_dirty_inodes+0x74/0x1f0 [f2fs] block_operations+0xdc/0x350 [f2fs] f2fs_write_checkpoint+0x104/0x1150 [f2fs] f2fs_sync_fs+0xa2/0x120 [f2fs] f2fs_balance_fs_bg+0x33c/0x390 [f2fs] f2fs_write_node_pages+0x4c/0x1f0 [f2fs] do_writepages+0x1c/0x70 __writeback_single_inode+0x45/0x320 writeback_sb_inodes+0x273/0x5c0 wb_writeback+0xff/0x2e0 wb_workfn+0xa1/0x370 process_one_work+0x138/0x350 worker_thread+0x4d/0x3d0 kthread+0x109/0x140 ret_from_fork+0x25/0x30 The root cause here is, with IO alignment feature enables, in worst case, we need F2FS_IO_SIZE() free blocks space for single one 4k write due to IO alignment feature will fill dummy pages to make IO being aligned. So we will easily run out of free segments during non-inline directory's data writeback, even in process of foreground GC. In order to fix this issue, I just propose to reserve additional free space for IO alignment feature to handle worst case of free space usage ratio during FGGC. Fixes: 0a595ebaaa6b ("f2fs: support IO alignment for DATA and NODE writes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-12-11 16:27:36 +03:00
err = adjust_reserved_segment(sbi);
if (err)
goto free_nm;
/* For write statistics */
sbi->sectors_written_start = f2fs_get_sectors_written(sbi);
/* Read accumulated write IO statistics if exists */
seg_i = CURSEG_I(sbi, CURSEG_HOT_NODE);
if (__exist_node_summaries(sbi))
sbi->kbytes_written =
le64_to_cpu(seg_i->journal->info.kbytes_written);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_build_gc_manager(sbi);
err = f2fs_build_stats(sbi);
if (err)
goto free_nm;
/* get an inode for node space */
sbi->node_inode = f2fs_iget(sb, F2FS_NODE_INO(sbi));
if (IS_ERR(sbi->node_inode)) {
f2fs_err(sbi, "Failed to read node inode");
err = PTR_ERR(sbi->node_inode);
goto free_stats;
}
/* read root inode and dentry */
root = f2fs_iget(sb, F2FS_ROOT_INO(sbi));
if (IS_ERR(root)) {
f2fs_err(sbi, "Failed to read root inode");
err = PTR_ERR(root);
goto free_node_inode;
}
f2fs: fix to do sanity check with inline flags https://bugzilla.kernel.org/show_bug.cgi?id=200221 - Overview BUG() in clear_inode() when mounting and un-mounting a corrupted f2fs image - Reproduce - Kernel message [ 538.601448] F2FS-fs (loop0): Invalid segment/section count (31, 24 x 1376257) [ 538.601458] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 538.724091] F2FS-fs (loop0): Try to recover 2th superblock, ret: 0 [ 538.724102] F2FS-fs (loop0): Mounted with checkpoint version = 2 [ 540.970834] ------------[ cut here ]------------ [ 540.970838] kernel BUG at fs/inode.c:512! [ 540.971750] invalid opcode: 0000 [#1] SMP KASAN PTI [ 540.972755] CPU: 1 PID: 1305 Comm: umount Not tainted 4.18.0-rc1+ #4 [ 540.974034] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 540.982913] RIP: 0010:clear_inode+0xc0/0xd0 [ 540.983774] Code: 8d a3 30 01 00 00 4c 89 e7 e8 1c ec f8 ff 48 8b 83 30 01 00 00 49 39 c4 75 1a 48 c7 83 a0 00 00 00 60 00 00 00 5b 41 5c 5d c3 <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 1f 40 00 66 66 66 66 90 55 [ 540.987570] RSP: 0018:ffff8801e34a7b70 EFLAGS: 00010002 [ 540.988636] RAX: 0000000000000000 RBX: ffff8801e9b744e8 RCX: ffffffffb840eb3a [ 540.990063] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8801e9b746b8 [ 540.991499] RBP: ffff8801e34a7b80 R08: ffffed003d36e8ce R09: ffffed003d36e8ce [ 540.992923] R10: 0000000000000001 R11: ffffed003d36e8cd R12: ffff8801e9b74668 [ 540.994360] R13: ffff8801e9b74760 R14: ffff8801e9b74528 R15: ffff8801e9b74530 [ 540.995786] FS: 00007f4662bdf840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 540.997403] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 540.998571] CR2: 000000000175c568 CR3: 00000001dcfe6000 CR4: 00000000000006e0 [ 541.000015] Call Trace: [ 541.000554] f2fs_evict_inode+0x253/0x630 [ 541.001381] evict+0x16f/0x290 [ 541.002015] iput+0x280/0x300 [ 541.002654] dentry_unlink_inode+0x165/0x1e0 [ 541.003528] __dentry_kill+0x16a/0x260 [ 541.004300] dentry_kill+0x70/0x250 [ 541.005018] dput+0x154/0x1d0 [ 541.005635] do_one_tree+0x34/0x40 [ 541.006354] shrink_dcache_for_umount+0x3f/0xa0 [ 541.007285] generic_shutdown_super+0x43/0x1c0 [ 541.008192] kill_block_super+0x52/0x80 [ 541.008978] kill_f2fs_super+0x62/0x70 [ 541.009750] deactivate_locked_super+0x6f/0xa0 [ 541.010664] deactivate_super+0x5e/0x80 [ 541.011450] cleanup_mnt+0x61/0xa0 [ 541.012151] __cleanup_mnt+0x12/0x20 [ 541.012893] task_work_run+0xc8/0xf0 [ 541.013635] exit_to_usermode_loop+0x125/0x130 [ 541.014555] do_syscall_64+0x138/0x170 [ 541.015340] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 541.016375] RIP: 0033:0x7f46624bf487 [ 541.017104] Code: 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 00 00 00 b8 a6 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 c9 2b 00 f7 d8 64 89 01 48 [ 541.020923] RSP: 002b:00007fff5e12e9a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 541.022452] RAX: 0000000000000000 RBX: 0000000001753030 RCX: 00007f46624bf487 [ 541.023885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000175a1e0 [ 541.025318] RBP: 000000000175a1e0 R08: 0000000000000000 R09: 0000000000000014 [ 541.026755] R10: 00000000000006b2 R11: 0000000000000246 R12: 00007f46629c883c [ 541.028186] R13: 0000000000000000 R14: 0000000001753210 R15: 00007fff5e12ec30 [ 541.029626] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 541.039445] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 541.040392] RIP: 0010:clear_inode+0xc0/0xd0 [ 541.041240] Code: 8d a3 30 01 00 00 4c 89 e7 e8 1c ec f8 ff 48 8b 83 30 01 00 00 49 39 c4 75 1a 48 c7 83 a0 00 00 00 60 00 00 00 5b 41 5c 5d c3 <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 1f 40 00 66 66 66 66 90 55 [ 541.045042] RSP: 0018:ffff8801e34a7b70 EFLAGS: 00010002 [ 541.046099] RAX: 0000000000000000 RBX: ffff8801e9b744e8 RCX: ffffffffb840eb3a [ 541.047537] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8801e9b746b8 [ 541.048965] RBP: ffff8801e34a7b80 R08: ffffed003d36e8ce R09: ffffed003d36e8ce [ 541.050402] R10: 0000000000000001 R11: ffffed003d36e8cd R12: ffff8801e9b74668 [ 541.051832] R13: ffff8801e9b74760 R14: ffff8801e9b74528 R15: ffff8801e9b74530 [ 541.053263] FS: 00007f4662bdf840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 541.054891] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 541.056039] CR2: 000000000175c568 CR3: 00000001dcfe6000 CR4: 00000000000006e0 [ 541.058506] ================================================================== [ 541.059991] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0 [ 541.061513] Read of size 8 at addr ffff8801e34a7970 by task umount/1305 [ 541.063302] CPU: 1 PID: 1305 Comm: umount Tainted: G D 4.18.0-rc1+ #4 [ 541.064838] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 541.066778] Call Trace: [ 541.067294] dump_stack+0x7b/0xb5 [ 541.067986] print_address_description+0x70/0x290 [ 541.068941] kasan_report+0x291/0x390 [ 541.069692] ? update_stack_state+0x38c/0x3e0 [ 541.070598] __asan_load8+0x54/0x90 [ 541.071315] update_stack_state+0x38c/0x3e0 [ 541.072172] ? __read_once_size_nocheck.constprop.7+0x20/0x20 [ 541.073340] ? vprintk_func+0x27/0x60 [ 541.074096] ? printk+0xa3/0xd3 [ 541.074762] ? __save_stack_trace+0x5e/0x100 [ 541.075634] unwind_next_frame.part.5+0x18e/0x490 [ 541.076594] ? unwind_dump+0x290/0x290 [ 541.077368] ? __show_regs+0x2c4/0x330 [ 541.078142] __unwind_start+0x106/0x190 [ 541.085422] __save_stack_trace+0x5e/0x100 [ 541.086268] ? __save_stack_trace+0x5e/0x100 [ 541.087161] ? unlink_anon_vmas+0xba/0x2c0 [ 541.087997] save_stack_trace+0x1f/0x30 [ 541.088782] save_stack+0x46/0xd0 [ 541.089475] ? __alloc_pages_slowpath+0x1420/0x1420 [ 541.090477] ? flush_tlb_mm_range+0x15e/0x220 [ 541.091364] ? __dec_node_state+0x24/0xb0 [ 541.092180] ? lock_page_memcg+0x85/0xf0 [ 541.092979] ? unlock_page_memcg+0x16/0x80 [ 541.093812] ? page_remove_rmap+0x198/0x520 [ 541.094674] ? mark_page_accessed+0x133/0x200 [ 541.095559] ? _cond_resched+0x1a/0x50 [ 541.096326] ? unmap_page_range+0xcd4/0xe50 [ 541.097179] ? rb_next+0x58/0x80 [ 541.097845] ? rb_next+0x58/0x80 [ 541.098518] __kasan_slab_free+0x13c/0x1a0 [ 541.099352] ? unlink_anon_vmas+0xba/0x2c0 [ 541.100184] kasan_slab_free+0xe/0x10 [ 541.100934] kmem_cache_free+0x89/0x1e0 [ 541.101724] unlink_anon_vmas+0xba/0x2c0 [ 541.102534] free_pgtables+0x101/0x1b0 [ 541.103299] exit_mmap+0x146/0x2a0 [ 541.103996] ? __ia32_sys_munmap+0x50/0x50 [ 541.104829] ? kasan_check_read+0x11/0x20 [ 541.105649] ? mm_update_next_owner+0x322/0x380 [ 541.106578] mmput+0x8b/0x1d0 [ 541.107191] do_exit+0x43a/0x1390 [ 541.107876] ? mm_update_next_owner+0x380/0x380 [ 541.108791] ? deactivate_super+0x5e/0x80 [ 541.109610] ? cleanup_mnt+0x61/0xa0 [ 541.110351] ? __cleanup_mnt+0x12/0x20 [ 541.111115] ? task_work_run+0xc8/0xf0 [ 541.111879] ? exit_to_usermode_loop+0x125/0x130 [ 541.112817] rewind_stack_do_exit+0x17/0x20 [ 541.113666] RIP: 0033:0x7f46624bf487 [ 541.114404] Code: Bad RIP value. [ 541.115094] RSP: 002b:00007fff5e12e9a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 541.116605] RAX: 0000000000000000 RBX: 0000000001753030 RCX: 00007f46624bf487 [ 541.118034] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000175a1e0 [ 541.119472] RBP: 000000000175a1e0 R08: 0000000000000000 R09: 0000000000000014 [ 541.120890] R10: 00000000000006b2 R11: 0000000000000246 R12: 00007f46629c883c [ 541.122321] R13: 0000000000000000 R14: 0000000001753210 R15: 00007fff5e12ec30 [ 541.124061] The buggy address belongs to the page: [ 541.125042] page:ffffea00078d29c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 541.126651] flags: 0x2ffff0000000000() [ 541.127418] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 541.128963] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 541.130516] page dumped because: kasan: bad access detected [ 541.131954] Memory state around the buggy address: [ 541.132924] ffff8801e34a7800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00 [ 541.134378] ffff8801e34a7880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 541.135814] >ffff8801e34a7900: 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 [ 541.137253] ^ [ 541.138637] ffff8801e34a7980: f1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 541.140075] ffff8801e34a7a00: 00 00 00 00 00 00 00 00 f3 00 00 00 00 00 00 00 [ 541.141509] ================================================================== - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/inode.c#L512 BUG_ON(inode->i_data.nrpages); The root cause is root directory inode is corrupted, it has both inline_data and inline_dentry flag, and its nlink is zero, so in ->evict(), after dropping all page cache, it grabs page #0 for inline data truncation, result in panic in later clear_inode() where we will check inode->i_data.nrpages value. This patch adds inline flags check in sanity_check_inode, in addition, do sanity check with root inode's nlink. Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-28 19:19:25 +03:00
if (!S_ISDIR(root->i_mode) || !root->i_blocks ||
!root->i_size || !root->i_nlink) {
iput(root);
err = -EINVAL;
goto free_node_inode;
}
sb->s_root = d_make_root(root); /* allocate root dentry */
if (!sb->s_root) {
err = -ENOMEM;
goto free_node_inode;
}
err = f2fs_init_compress_inode(sbi);
if (err)
goto free_root_inode;
err = f2fs_register_sysfs(sbi);
if (err)
goto free_compress_inode;
#ifdef CONFIG_QUOTA
/* Enable quota usage during mount */
if (f2fs_sb_has_quota_ino(sbi) && !f2fs_readonly(sb)) {
err = f2fs_enable_quotas(sb);
if (err)
f2fs_err(sbi, "Cannot turn on quotas: error %d", err);
}
quota_enabled = f2fs_recover_quota_begin(sbi);
#endif
/* if there are any orphan inodes, free them */
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_recover_orphan_inodes(sbi);
if (err)
goto free_meta;
if (unlikely(is_set_ckpt_flags(sbi, CP_DISABLED_FLAG)))
goto reset_checkpoint;
/* recover fsynced data */
if (!test_opt(sbi, DISABLE_ROLL_FORWARD) &&
!test_opt(sbi, NORECOVERY)) {
/*
* mount should be failed, when device has readonly mode, and
* previous checkpoint was not done by clean system shutdown.
*/
if (f2fs_hw_is_readonly(sbi)) {
if (!is_set_ckpt_flags(sbi, CP_UMOUNT_FLAG)) {
err = f2fs_recover_fsync_data(sbi, true);
if (err > 0) {
err = -EROFS;
f2fs_err(sbi, "Need to recover fsync data, but "
"write access unavailable, please try "
"mount w/ disable_roll_forward or norecovery");
}
if (err < 0)
goto free_meta;
}
f2fs_info(sbi, "write access unavailable, skipping recovery");
goto reset_checkpoint;
}
if (need_fsck)
set_sbi_flag(sbi, SBI_NEED_FSCK);
if (skip_recovery)
goto reset_checkpoint;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_recover_fsync_data(sbi, false);
if (err < 0) {
if (err != -ENOMEM)
skip_recovery = true;
need_fsck = true;
f2fs_err(sbi, "Cannot recover all fsync data errno=%d",
err);
goto free_meta;
}
} else {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_recover_fsync_data(sbi, true);
if (!f2fs_readonly(sb) && err > 0) {
err = -EINVAL;
f2fs_err(sbi, "Need to recover fsync data");
goto free_meta;
}
}
#ifdef CONFIG_QUOTA
f2fs_recover_quota_end(sbi, quota_enabled);
#endif
/*
* If the f2fs is not readonly and fsync data recovery succeeds,
* check zoned block devices' write pointer consistency.
*/
if (!err && !f2fs_readonly(sb) && f2fs_sb_has_blkzoned(sbi)) {
err = f2fs_check_write_pointer(sbi);
if (err)
goto free_meta;
}
reset_checkpoint:
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 16:14:49 +03:00
f2fs_init_inmem_curseg(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
/* f2fs_recover_fsync_data() cleared this already */
clear_sbi_flag(sbi, SBI_POR_DOING);
if (test_opt(sbi, DISABLE_CHECKPOINT)) {
err = f2fs_disable_checkpoint(sbi);
if (err)
goto sync_free_meta;
} else if (is_set_ckpt_flags(sbi, CP_DISABLED_FLAG)) {
f2fs_enable_checkpoint(sbi);
}
/*
* If filesystem is not mounted as read-only then
* do start the gc_thread.
*/
if ((F2FS_OPTION(sbi).bggc_mode != BGGC_MODE_OFF ||
test_opt(sbi, GC_MERGE)) && !f2fs_readonly(sb)) {
/* After POR, we can run background GC thread.*/
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_start_gc_thread(sbi);
if (err)
goto sync_free_meta;
}
kvfree(options);
/* recover broken superblock */
if (recovery) {
err = f2fs_commit_super(sbi, true);
f2fs_info(sbi, "Try to recover %dth superblock, ret: %d",
sbi->valid_super_block ? 1 : 2, err);
}
f2fs_join_shrinker(sbi);
f2fs_tuning_parameters(sbi);
f2fs_notice(sbi, "Mounted with checkpoint version = %llx",
cur_cp_version(F2FS_CKPT(sbi)));
f2fs_update_time(sbi, CP_TIME);
f2fs_update_time(sbi, REQ_TIME);
clear_sbi_flag(sbi, SBI_CP_DISABLED_QUICK);
return 0;
sync_free_meta:
/* safe to flush all the data */
sync_filesystem(sbi->sb);
retry_cnt = 0;
free_meta:
#ifdef CONFIG_QUOTA
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 13:49:26 +03:00
f2fs_truncate_quota_inode_pages(sb);
if (f2fs_sb_has_quota_ino(sbi) && !f2fs_readonly(sb))
f2fs_quota_off_umount(sbi->sb);
#endif
/*
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
* Some dirty meta pages can be produced by f2fs_recover_orphan_inodes()
* failed by EIO. Then, iput(node_inode) can trigger balance_fs_bg()
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
* followed by f2fs_write_checkpoint() through f2fs_write_node_pages(), which
* falls into an infinite loop in f2fs_sync_meta_pages().
*/
truncate_inode_pages_final(META_MAPPING(sbi));
/* evict some inodes being cached by GC */
evict_inodes(sb);
f2fs_unregister_sysfs(sbi);
free_compress_inode:
f2fs_destroy_compress_inode(sbi);
free_root_inode:
dput(sb->s_root);
sb->s_root = NULL;
free_node_inode:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_release_ino_entry(sbi, true);
truncate_inode_pages_final(NODE_MAPPING(sbi));
iput(sbi->node_inode);
sbi->node_inode = NULL;
free_stats:
f2fs_destroy_stats(sbi);
free_nm:
/* stop discard thread before destroying node manager */
f2fs_stop_discard_thread(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_destroy_node_manager(sbi);
free_sm:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_destroy_segment_manager(sbi);
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 03:00:42 +03:00
stop_ckpt_thread:
f2fs_stop_ckpt_thread(sbi);
/* flush s_error_work before sbi destroy */
flush_work(&sbi->s_error_work);
f2fs_destroy_post_read_wq(sbi);
free_devices:
destroy_device_list(sbi);
kvfree(sbi->ckpt);
free_meta_inode:
make_bad_inode(sbi->meta_inode);
iput(sbi->meta_inode);
sbi->meta_inode = NULL;
free_page_array_cache:
f2fs_destroy_page_array_cache(sbi);
free_xattr_cache:
f2fs_destroy_xattr_caches(sbi);
free_io_dummy:
mempool_destroy(sbi->write_io_dummy);
free_percpu:
destroy_percpu_info(sbi);
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 01:29:09 +03:00
free_iostat:
f2fs_destroy_iostat(sbi);
free_bio_info:
for (i = 0; i < NR_PAGE_TYPE; i++)
kvfree(sbi->write_io[i]);
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
#if IS_ENABLED(CONFIG_UNICODE)
utf8_unload(sb->s_encoding);
sb->s_encoding = NULL;
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 02:05:28 +03:00
#endif
free_options:
#ifdef CONFIG_QUOTA
for (i = 0; i < MAXQUOTAS; i++)
kfree(F2FS_OPTION(sbi).s_qf_names[i]);
#endif
fscrypt: handle test_dummy_encryption in more logical way The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-17 07:11:35 +03:00
fscrypt_free_dummy_policy(&F2FS_OPTION(sbi).dummy_enc_policy);
kvfree(options);
free_sb_buf:
kfree(raw_super);
free_sbi:
if (sbi->s_chksum_driver)
crypto_free_shash(sbi->s_chksum_driver);
kfree(sbi);
/* give only one another chance */
if (retry_cnt > 0 && skip_recovery) {
retry_cnt--;
shrink_dcache_sb(sb);
goto try_onemore;
}
return err;
}
static struct dentry *f2fs_mount(struct file_system_type *fs_type, int flags,
const char *dev_name, void *data)
{
return mount_bdev(fs_type, flags, dev_name, data, f2fs_fill_super);
}
static void kill_f2fs_super(struct super_block *sb)
{
if (sb->s_root) {
struct f2fs_sb_info *sbi = F2FS_SB(sb);
set_sbi_flag(sbi, SBI_IS_CLOSE);
f2fs_stop_gc_thread(sbi);
f2fs_stop_discard_thread(sbi);
#ifdef CONFIG_F2FS_FS_COMPRESSION
/*
* latter evict_inode() can bypass checking and invalidating
* compress inode cache.
*/
if (test_opt(sbi, COMPRESS_CACHE))
truncate_inode_pages_final(COMPRESS_MAPPING(sbi));
#endif
if (is_sbi_flag_set(sbi, SBI_IS_DIRTY) ||
!is_set_ckpt_flags(sbi, CP_UMOUNT_FLAG)) {
struct cp_control cpc = {
.reason = CP_UMOUNT,
};
f2fs_write_checkpoint(sbi, &cpc);
}
f2fs: fix to flush all dirty inodes recovered in readonly fs generic/417 reported as blow: ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/inode.c:695! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 21697 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: f2fs_evict_inode+0x556/0x580 [f2fs] Call Trace: ? _raw_spin_unlock+0x2c/0x50 evict+0xa8/0x170 dispose_list+0x34/0x40 evict_inodes+0x118/0x120 generic_shutdown_super+0x41/0x100 ? rcu_read_lock_sched_held+0x97/0xa0 kill_block_super+0x22/0x50 kill_f2fs_super+0x6f/0x80 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: f2fs_evict_inode+0x556/0x580 [f2fs] It can simply reproduced with scripts: Enable quota feature during mkfs. Testcase1: 1. mkfs.f2fs /dev/zram0 2. mount -t f2fs /dev/zram0 /mnt/f2fs 3. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4k" -c "fsync" 4. godown /mnt/f2fs 5. umount /mnt/f2fs 6. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs 7. umount /mnt/f2fs Testcase2: 1. mkfs.f2fs /dev/zram0 2. mount -t f2fs /dev/zram0 /mnt/f2fs 3. touch /mnt/f2fs/file 4. create process[pid = x] do: a) open /mnt/f2fs/file; b) unlink /mnt/f2fs/file 5. godown -f /mnt/f2fs 6. kill process[pid = x] 7. umount /mnt/f2fs 8. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs 9. umount /mnt/f2fs The reason is: during recovery, i_{c,m}time of inode will be updated, then the inode can be set dirty w/o being tracked in sbi->inode_list[DIRTY_META] global list, so later write_checkpoint will not flush such dirty inode into node page. Once umount is called, sync_filesystem() in generic_shutdown_super() will skip syncng dirty inodes due to sb_rdonly check, leaving dirty inodes there. To solve this issue, during umount, add remove SB_RDONLY flag in sb->s_flags, to make sure sync_filesystem() will not be skipped. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-22 12:11:05 +03:00
if (is_sbi_flag_set(sbi, SBI_IS_RECOVERED) && f2fs_readonly(sb))
sb->s_flags &= ~SB_RDONLY;
}
kill_block_super(sb);
}
static struct file_system_type f2fs_fs_type = {
.owner = THIS_MODULE,
.name = "f2fs",
.mount = f2fs_mount,
.kill_sb = kill_f2fs_super,
.fs_flags = FS_REQUIRES_DEV | FS_ALLOW_IDMAP,
};
fs: Limit sys_mount to only request filesystem modules. Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 07:39:14 +04:00
MODULE_ALIAS_FS("f2fs");
static int __init init_inodecache(void)
{
2016-01-15 02:18:21 +03:00
f2fs_inode_cachep = kmem_cache_create("f2fs_inode_cache",
sizeof(struct f2fs_inode_info), 0,
SLAB_RECLAIM_ACCOUNT|SLAB_ACCOUNT, NULL);
return f2fs_inode_cachep ? 0 : -ENOMEM;
}
static void destroy_inodecache(void)
{
/*
* Make sure all delayed rcu free inodes are flushed before we
* destroy cache.
*/
rcu_barrier();
kmem_cache_destroy(f2fs_inode_cachep);
}
static int __init init_f2fs_fs(void)
{
int err;
if (PAGE_SIZE != F2FS_BLKSIZE) {
printk("F2FS not supported on PAGE_SIZE(%lu) != %d\n",
PAGE_SIZE, F2FS_BLKSIZE);
return -EINVAL;
}
err = init_inodecache();
if (err)
goto fail;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_create_node_manager_caches();
if (err)
goto free_inodecache;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_create_segment_manager_caches();
if (err)
goto free_node_manager_caches;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_create_checkpoint_caches();
if (err)
goto free_segment_manager_caches;
err = f2fs_create_recovery_cache();
if (err)
goto free_checkpoint_caches;
err = f2fs_create_extent_cache();
if (err)
goto free_recovery_cache;
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 16:14:49 +03:00
err = f2fs_create_garbage_collection_cache();
if (err)
goto free_extent_cache;
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 16:14:49 +03:00
err = f2fs_init_sysfs();
if (err)
goto free_garbage_collection_cache;
mm: shrinkers: provide shrinkers with names Currently shrinkers are anonymous objects. For debugging purposes they can be identified by count/scan function names, but it's not always useful: e.g. for superblock's shrinkers it's nice to have at least an idea of to which superblock the shrinker belongs. This commit adds names to shrinkers. register_shrinker() and prealloc_shrinker() functions are extended to take a format and arguments to master a name. In some cases it's not possible to determine a good name at the time when a shrinker is allocated. For such cases shrinker_debugfs_rename() is provided. The expected format is: <subsystem>-<shrinker_type>[:<instance>]-<id> For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair. After this change the shrinker debugfs directory looks like: $ cd /sys/kernel/debug/shrinker/ $ ls dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42 mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43 mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44 rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49 sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13 sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36 sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19 sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10 sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9 sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37 sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38 sb-dax-11 sb-proc-45 sb-tmpfs-35 sb-debugfs-7 sb-proc-46 sb-tmpfs-40 [roman.gushchin@linux.dev: fix build warnings] Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle Reported-by: kernel test robot <lkp@intel.com> Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-01 06:22:24 +03:00
err = register_shrinker(&f2fs_shrinker_info, "f2fs-shrinker");
if (err)
goto free_sysfs;
err = register_filesystem(&f2fs_fs_type);
if (err)
goto free_shrinker;
f2fs_create_root_stats();
err = f2fs_init_post_read_processing();
if (err)
goto free_root_stats;
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 01:29:09 +03:00
err = f2fs_init_iostat_processing();
if (err)
goto free_post_read;
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 01:29:09 +03:00
err = f2fs_init_bio_entry_cache();
if (err)
goto free_iostat;
err = f2fs_init_bioset();
if (err)
goto free_bio_entry_cache;
err = f2fs_init_compress_mempool();
if (err)
goto free_bioset;
err = f2fs_init_compress_cache();
if (err)
goto free_compress_mempool;
err = f2fs_create_casefold_cache();
if (err)
goto free_compress_cache;
return 0;
free_compress_cache:
f2fs_destroy_compress_cache();
free_compress_mempool:
f2fs_destroy_compress_mempool();
free_bioset:
f2fs_destroy_bioset();
free_bio_entry_cache:
f2fs_destroy_bio_entry_cache();
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 01:29:09 +03:00
free_iostat:
f2fs_destroy_iostat_processing();
free_post_read:
f2fs_destroy_post_read_processing();
free_root_stats:
f2fs_destroy_root_stats();
unregister_filesystem(&f2fs_fs_type);
free_shrinker:
unregister_shrinker(&f2fs_shrinker_info);
free_sysfs:
f2fs_exit_sysfs();
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 16:14:49 +03:00
free_garbage_collection_cache:
f2fs_destroy_garbage_collection_cache();
free_extent_cache:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_destroy_extent_cache();
free_recovery_cache:
f2fs_destroy_recovery_cache();
free_checkpoint_caches:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_destroy_checkpoint_caches();
free_segment_manager_caches:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_destroy_segment_manager_caches();
free_node_manager_caches:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_destroy_node_manager_caches();
free_inodecache:
destroy_inodecache();
fail:
return err;
}
static void __exit exit_f2fs_fs(void)
{
f2fs_destroy_casefold_cache();
f2fs_destroy_compress_cache();
f2fs_destroy_compress_mempool();
f2fs_destroy_bioset();
f2fs_destroy_bio_entry_cache();
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-21 01:29:09 +03:00
f2fs_destroy_iostat_processing();
f2fs_destroy_post_read_processing();
f2fs_destroy_root_stats();
unregister_filesystem(&f2fs_fs_type);
unregister_shrinker(&f2fs_shrinker_info);
f2fs_exit_sysfs();
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 16:14:49 +03:00
f2fs_destroy_garbage_collection_cache();
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_destroy_extent_cache();
f2fs_destroy_recovery_cache();
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_destroy_checkpoint_caches();
f2fs_destroy_segment_manager_caches();
f2fs_destroy_node_manager_caches();
destroy_inodecache();
}
module_init(init_f2fs_fs)
module_exit(exit_f2fs_fs)
MODULE_AUTHOR("Samsung Electronics's Praesto Team");
MODULE_DESCRIPTION("Flash Friendly File System");
MODULE_LICENSE("GPL");
MODULE_SOFTDEP("pre: crc32");
f2fs: remove checkpoint in f2fs_freeze The generic freeze_super() calls sync_filesystems() before f2fs_freeze(). So, basically we don't need to do checkpoint in f2fs_freeze(). But, in xfs/068, it triggers circular locking problem below due to gc_mutex for checkpoint. ====================================================== [ INFO: possible circular locking dependency detected ] 4.9.0-rc1+ #132 Tainted: G OE ------------------------------------------------------- 1. wait for __sb_start_write() by [<ffffffff9845f353>] dump_stack+0x85/0xc2 [<ffffffff980e80bf>] print_circular_bug+0x1cf/0x230 [<ffffffff980eb4d0>] __lock_acquire+0x19e0/0x1bc0 [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff9826bdd0>] __sb_start_write+0x130/0x200 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffffc08c7c3b>] f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff98289991>] iput+0x171/0x2c0 [<ffffffffc08cfccf>] f2fs_sync_inode_meta+0x3f/0xf0 [f2fs] [<ffffffffc08cfe04>] block_operations+0x84/0x110 [f2fs] [<ffffffffc08cff78>] write_checkpoint+0xe8/0xf20 [f2fs] [<ffffffff980e979d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffff9803e9d9>] ? sched_clock+0x9/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c6df5>] f2fs_sync_fs+0x85/0x190 [f2fs] [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4fb0>] sync_fs_one_sb+0x20/0x30 [<ffffffff9826ca3e>] iterate_supers+0xae/0x100 [<ffffffff982a50b5>] sys_sync+0x55/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 2. wait for sbi->gc_mutex by [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffff989063d6>] mutex_lock_nested+0x76/0x3f0 [<ffffffffc08c6de9>] f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c7a6c>] f2fs_freeze+0x1c/0x20 [f2fs] [<ffffffff9826b6ef>] freeze_super+0xcf/0x190 [<ffffffff9827eebc>] do_vfs_ioctl+0x53c/0x6a0 [<ffffffff9827f099>] SyS_ioctl+0x79/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-05 00:59:15 +03:00