linux/fs/dax.c

2043 lines
55 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* fs/dax.c - Direct Access filesystem code
* Copyright (c) 2013-2014 Intel Corporation
* Author: Matthew Wilcox <matthew.r.wilcox@intel.com>
* Author: Ross Zwisler <ross.zwisler@linux.intel.com>
*/
#include <linux/atomic.h>
#include <linux/blkdev.h>
#include <linux/buffer_head.h>
#include <linux/dax.h>
#include <linux/fs.h>
#include <linux/highmem.h>
#include <linux/memcontrol.h>
#include <linux/mm.h>
#include <linux/mutex.h>
#include <linux/pagevec.h>
#include <linux/sched.h>
#include <linux/sched/signal.h>
#include <linux/uio.h>
#include <linux/vmstat.h>
#include <linux/pfn_t.h>
#include <linux/sizes.h>
#include <linux/mmu_notifier.h>
#include <linux/iomap.h>
dax: fix missing writeprotect the pte entry Currently dax_mapping_entry_mkclean() fails to clean and write protect the pte entry within a DAX PMD entry during an *sync operation. This can result in data loss in the following sequence: 1) process A mmap write to DAX PMD, dirtying PMD radix tree entry and making the pmd entry dirty and writeable. 2) process B mmap with the @offset (e.g. 4K) and @length (e.g. 4K) write to the same file, dirtying PMD radix tree entry (already done in 1)) and making the pte entry dirty and writeable. 3) fsync, flushing out PMD data and cleaning the radix tree entry. We currently fail to mark the pte entry as clean and write protected since the vma of process B is not covered in dax_entry_mkclean(). 4) process B writes to the pte. These don't cause any page faults since the pte entry is dirty and writeable. The radix tree entry remains clean. 5) fsync, which fails to flush the dirty PMD data because the radix tree entry was clean. 6) crash - dirty data that should have been fsync'd as part of 5) could still have been in the processor cache, and is lost. Just to use pfn_mkclean_range() to clean the pfns to fix this issue. Link: https://lkml.kernel.org/r/20220403053957.10770-6-songmuchun@bytedance.com Fixes: 4b4bb46d00b3 ("dax: clear dirty entry tags on cache flush") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 09:16:10 +03:00
#include <linux/rmap.h>
#include <asm/pgalloc.h>
dax: add tracepoint infrastructure, PMD tracing Tracepoints are the standard way to capture debugging and tracing information in many parts of the kernel, including the XFS and ext4 filesystems. Create a tracepoint header for FS DAX and add the first DAX tracepoints to the PMD fault handler. This allows the tracing for DAX to be done in the same way as the filesystem tracing so that developers can look at them together and get a coherent idea of what the system is doing. I added both an entry and exit tracepoint because future patches will add tracepoints to child functions of dax_iomap_pmd_fault() like dax_pmd_load_hole() and dax_pmd_insert_mapping(). We want those messages to be wrapped by the parent function tracepoints so the code flow is more easily understood. Having entry and exit tracepoints for faults also allows us to easily see what filesystems functions were called during the fault. These filesystem functions get executed via iomap_begin() and iomap_end() calls, for example, and will have their own tracepoints. For PMD faults we primarily want to understand the type of mapping, the fault flags, the faulting address and whether it fell back to 4k faults. If it fell back to 4k faults the tracepoints should let us understand why. I named the new tracepoint header file "fs_dax.h" to allow for device DAX to have its own separate tracing header in the same directory at some point. Here is an example output for these events from a successful PMD fault: big-1441 [005] .... 32.582758: xfs_filemap_pmd_fault: dev 259:0 ino 0x1003 big-1441 [005] .... 32.582776: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 big-1441 [005] .... 32.583292: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 NOPAGE Link: http://lkml.kernel.org/r/1484085142-2297-3-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 02:39:50 +03:00
#define CREATE_TRACE_POINTS
#include <trace/events/fs_dax.h>
static inline unsigned int pe_order(enum page_entry_size pe_size)
{
if (pe_size == PE_SIZE_PTE)
return PAGE_SHIFT - PAGE_SHIFT;
if (pe_size == PE_SIZE_PMD)
return PMD_SHIFT - PAGE_SHIFT;
if (pe_size == PE_SIZE_PUD)
return PUD_SHIFT - PAGE_SHIFT;
return ~0;
}
/* We choose 4096 entries - same as per-zone page wait tables */
#define DAX_WAIT_TABLE_BITS 12
#define DAX_WAIT_TABLE_ENTRIES (1 << DAX_WAIT_TABLE_BITS)
/* The 'colour' (ie low bits) within a PMD of a page offset. */
#define PG_PMD_COLOUR ((PMD_SIZE >> PAGE_SHIFT) - 1)
#define PG_PMD_NR (PMD_SIZE >> PAGE_SHIFT)
/* The order of a PMD entry */
#define PMD_ORDER (PMD_SHIFT - PAGE_SHIFT)
static wait_queue_head_t wait_table[DAX_WAIT_TABLE_ENTRIES];
static int __init init_dax_wait_table(void)
{
int i;
for (i = 0; i < DAX_WAIT_TABLE_ENTRIES; i++)
init_waitqueue_head(wait_table + i);
return 0;
}
fs_initcall(init_dax_wait_table);
/*
* DAX pagecache entries use XArray value entries so they can't be mistaken
* for pages. We use one bit for locking, one bit for the entry size (PMD)
* and two more to tell us if the entry is a zero page or an empty entry that
* is just used for locking. In total four special bits.
*
* If the PMD bit isn't set the entry has size PAGE_SIZE, and if the ZERO_PAGE
* and EMPTY bits aren't set the entry is a normal DAX entry with a filesystem
* block allocation.
*/
#define DAX_SHIFT (4)
#define DAX_LOCKED (1UL << 0)
#define DAX_PMD (1UL << 1)
#define DAX_ZERO_PAGE (1UL << 2)
#define DAX_EMPTY (1UL << 3)
static unsigned long dax_to_pfn(void *entry)
{
return xa_to_value(entry) >> DAX_SHIFT;
}
static void *dax_make_entry(pfn_t pfn, unsigned long flags)
{
return xa_mk_value(flags | (pfn_t_to_pfn(pfn) << DAX_SHIFT));
}
static bool dax_is_locked(void *entry)
{
return xa_to_value(entry) & DAX_LOCKED;
}
static unsigned int dax_entry_order(void *entry)
{
if (xa_to_value(entry) & DAX_PMD)
return PMD_ORDER;
return 0;
}
static unsigned long dax_is_pmd_entry(void *entry)
{
return xa_to_value(entry) & DAX_PMD;
}
static bool dax_is_pte_entry(void *entry)
{
return !(xa_to_value(entry) & DAX_PMD);
}
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
static int dax_is_zero_entry(void *entry)
{
return xa_to_value(entry) & DAX_ZERO_PAGE;
}
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
static int dax_is_empty_entry(void *entry)
{
return xa_to_value(entry) & DAX_EMPTY;
}
/*
* true if the entry that was found is of a smaller order than the entry
* we were looking for
*/
static bool dax_is_conflict(void *entry)
{
return entry == XA_RETRY_ENTRY;
}
/*
* DAX page cache entry locking
*/
struct exceptional_entry_key {
struct xarray *xa;
pgoff_t entry_start;
};
struct wait_exceptional_entry_queue {
wait_queue_entry_t wait;
struct exceptional_entry_key key;
};
/**
* enum dax_wake_mode: waitqueue wakeup behaviour
* @WAKE_ALL: wake all waiters in the waitqueue
* @WAKE_NEXT: wake only the first waiter in the waitqueue
*/
enum dax_wake_mode {
WAKE_ALL,
WAKE_NEXT,
};
static wait_queue_head_t *dax_entry_waitqueue(struct xa_state *xas,
void *entry, struct exceptional_entry_key *key)
{
unsigned long hash;
unsigned long index = xas->xa_index;
/*
* If 'entry' is a PMD, align the 'index' that we use for the wait
* queue to the start of that PMD. This ensures that all offsets in
* the range covered by the PMD map to the same bit lock.
*/
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
if (dax_is_pmd_entry(entry))
index &= ~PG_PMD_COLOUR;
key->xa = xas->xa;
key->entry_start = index;
hash = hash_long((unsigned long)xas->xa ^ index, DAX_WAIT_TABLE_BITS);
return wait_table + hash;
}
static int wake_exceptional_entry_func(wait_queue_entry_t *wait,
unsigned int mode, int sync, void *keyp)
{
struct exceptional_entry_key *key = keyp;
struct wait_exceptional_entry_queue *ewait =
container_of(wait, struct wait_exceptional_entry_queue, wait);
if (key->xa != ewait->key.xa ||
key->entry_start != ewait->key.entry_start)
return 0;
return autoremove_wake_function(wait, mode, sync, NULL);
}
/*
* @entry may no longer be the entry at the index in the mapping.
* The important information it's conveying is whether the entry at
* this index used to be a PMD entry.
*/
static void dax_wake_entry(struct xa_state *xas, void *entry,
enum dax_wake_mode mode)
{
struct exceptional_entry_key key;
wait_queue_head_t *wq;
wq = dax_entry_waitqueue(xas, entry, &key);
/*
* Checking for locked entry and prepare_to_wait_exclusive() happens
* under the i_pages lock, ditto for entry handling in our callers.
* So at this point all tasks that could have seen our entry locked
* must be in the waitqueue and the following check will see them.
*/
if (waitqueue_active(wq))
__wake_up(wq, TASK_NORMAL, mode == WAKE_ALL ? 0 : 1, &key);
}
/*
* Look up entry in page cache, wait for it to become unlocked if it
* is a DAX entry and return it. The caller must subsequently call
* put_unlocked_entry() if it did not lock the entry or dax_unlock_entry()
* if it did. The entry returned may have a larger order than @order.
* If @order is larger than the order of the entry found in i_pages, this
* function returns a dax_is_conflict entry.
*
* Must be called with the i_pages lock held.
*/
static void *get_unlocked_entry(struct xa_state *xas, unsigned int order)
{
void *entry;
struct wait_exceptional_entry_queue ewait;
wait_queue_head_t *wq;
init_wait(&ewait.wait);
ewait.wait.func = wake_exceptional_entry_func;
for (;;) {
entry = xas_find_conflict(xas);
if (!entry || WARN_ON_ONCE(!xa_is_value(entry)))
return entry;
if (dax_entry_order(entry) < order)
return XA_RETRY_ENTRY;
if (!dax_is_locked(entry))
return entry;
wq = dax_entry_waitqueue(xas, entry, &ewait.key);
prepare_to_wait_exclusive(wq, &ewait.wait,
TASK_UNINTERRUPTIBLE);
xas_unlock_irq(xas);
xas_reset(xas);
schedule();
finish_wait(wq, &ewait.wait);
xas_lock_irq(xas);
}
}
/*
* The only thing keeping the address space around is the i_pages lock
* (it's cycled in clear_inode() after removing the entries from i_pages)
* After we call xas_unlock_irq(), we cannot touch xas->xa.
*/
static void wait_entry_unlocked(struct xa_state *xas, void *entry)
{
struct wait_exceptional_entry_queue ewait;
wait_queue_head_t *wq;
init_wait(&ewait.wait);
ewait.wait.func = wake_exceptional_entry_func;
wq = dax_entry_waitqueue(xas, entry, &ewait.key);
/*
* Unlike get_unlocked_entry() there is no guarantee that this
* path ever successfully retrieves an unlocked entry before an
* inode dies. Perform a non-exclusive wait in case this path
* never successfully performs its own wake up.
*/
prepare_to_wait(wq, &ewait.wait, TASK_UNINTERRUPTIBLE);
xas_unlock_irq(xas);
schedule();
finish_wait(wq, &ewait.wait);
}
static void put_unlocked_entry(struct xa_state *xas, void *entry,
enum dax_wake_mode mode)
{
if (entry && !dax_is_conflict(entry))
dax_wake_entry(xas, entry, mode);
}
/*
* We used the xa_state to get the entry, but then we locked the entry and
* dropped the xa_lock, so we know the xa_state is stale and must be reset
* before use.
*/
static void dax_unlock_entry(struct xa_state *xas, void *entry)
{
void *old;
BUG_ON(dax_is_locked(entry));
xas_reset(xas);
xas_lock_irq(xas);
old = xas_store(xas, entry);
xas_unlock_irq(xas);
BUG_ON(!dax_is_locked(old));
dax_wake_entry(xas, entry, WAKE_NEXT);
}
/*
* Return: The entry stored at this location before it was locked.
*/
static void *dax_lock_entry(struct xa_state *xas, void *entry)
{
unsigned long v = xa_to_value(entry);
return xas_store(xas, xa_mk_value(v | DAX_LOCKED));
}
static unsigned long dax_entry_size(void *entry)
{
if (dax_is_zero_entry(entry))
return 0;
else if (dax_is_empty_entry(entry))
return 0;
else if (dax_is_pmd_entry(entry))
return PMD_SIZE;
else
return PAGE_SIZE;
}
static unsigned long dax_end_pfn(void *entry)
{
return dax_to_pfn(entry) + dax_entry_size(entry) / PAGE_SIZE;
}
/*
* Iterate through all mapped pfns represented by an entry, i.e. skip
* 'empty' and 'zero' entries.
*/
#define for_each_mapped_pfn(entry, pfn) \
for (pfn = dax_to_pfn(entry); \
pfn < dax_end_pfn(entry); pfn++)
fsdax: introduce page->share for fsdax in reflink mode Patch series "fsdax,xfs: fix warning messages", v2. Many testcases failed in dax+reflink mode with warning message in dmesg. Such as generic/051,075,127. The warning message is like this: [ 775.509337] ------------[ cut here ]------------ [ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69 [ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse [ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d [ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014 [ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69 [ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48 [ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082 [ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042 [ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff [ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0 [ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320 [ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001 [ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0 [ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 775.531002] Call Trace: [ 775.531230] <TASK> [ 775.531444] dax_fault_iter+0x267/0x6c0 [ 775.531719] dax_iomap_pte_fault+0x198/0x3d0 [ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7] [ 775.532603] __do_fault+0x30/0x1e0 [ 775.532903] do_fault+0x314/0x6c0 [ 775.533166] __handle_mm_fault+0x646/0x1250 [ 775.533480] handle_mm_fault+0xc1/0x230 [ 775.533810] do_user_addr_fault+0x1ac/0x610 [ 775.534110] exc_page_fault+0x63/0x140 [ 775.534389] asm_exc_page_fault+0x22/0x30 [ 775.534678] RIP: 0033:0x7f39fc55820a [ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00 [ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202 [ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1 [ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040 [ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000 [ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001 [ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003 [ 775.538086] </TASK> [ 775.538333] ---[ end trace 0000000000000000 ]--- This also affects dax+noreflink mode if we run the test after a dax+reflink test. So, the most urgent thing is solving the warning messages. With these fixes, most warning messages in dax_associate_entry() are gone. But honestly, generic/388 will randomly failed with the warning. The case shutdown the xfs when fsstress is running, and do it for many times. I think the reason is that dax pages in use are not able to be invalidated in time when fs is shutdown. The next time dax page to be associated, it still remains the mapping value set last time. I'll keep on solving it. The warning message in dax_writeback_one() can also be fixed because of the dax unshare. This patch (of 8): fsdax page is used not only when CoW, but also mapread. To make the it easily understood, use 'share' to indicate that the dax page is shared by more than one extent. And add helper functions to use it. Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED. [ruansy.fnst@fujitsu.com: rename several functions] Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com [ruansy.fnst@fujitsu.com: v2.2] Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-01 18:28:51 +03:00
static inline bool dax_page_is_shared(struct page *page)
{
fsdax: introduce page->share for fsdax in reflink mode Patch series "fsdax,xfs: fix warning messages", v2. Many testcases failed in dax+reflink mode with warning message in dmesg. Such as generic/051,075,127. The warning message is like this: [ 775.509337] ------------[ cut here ]------------ [ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69 [ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse [ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d [ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014 [ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69 [ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48 [ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082 [ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042 [ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff [ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0 [ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320 [ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001 [ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0 [ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 775.531002] Call Trace: [ 775.531230] <TASK> [ 775.531444] dax_fault_iter+0x267/0x6c0 [ 775.531719] dax_iomap_pte_fault+0x198/0x3d0 [ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7] [ 775.532603] __do_fault+0x30/0x1e0 [ 775.532903] do_fault+0x314/0x6c0 [ 775.533166] __handle_mm_fault+0x646/0x1250 [ 775.533480] handle_mm_fault+0xc1/0x230 [ 775.533810] do_user_addr_fault+0x1ac/0x610 [ 775.534110] exc_page_fault+0x63/0x140 [ 775.534389] asm_exc_page_fault+0x22/0x30 [ 775.534678] RIP: 0033:0x7f39fc55820a [ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00 [ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202 [ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1 [ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040 [ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000 [ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001 [ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003 [ 775.538086] </TASK> [ 775.538333] ---[ end trace 0000000000000000 ]--- This also affects dax+noreflink mode if we run the test after a dax+reflink test. So, the most urgent thing is solving the warning messages. With these fixes, most warning messages in dax_associate_entry() are gone. But honestly, generic/388 will randomly failed with the warning. The case shutdown the xfs when fsstress is running, and do it for many times. I think the reason is that dax pages in use are not able to be invalidated in time when fs is shutdown. The next time dax page to be associated, it still remains the mapping value set last time. I'll keep on solving it. The warning message in dax_writeback_one() can also be fixed because of the dax unshare. This patch (of 8): fsdax page is used not only when CoW, but also mapread. To make the it easily understood, use 'share' to indicate that the dax page is shared by more than one extent. And add helper functions to use it. Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED. [ruansy.fnst@fujitsu.com: rename several functions] Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com [ruansy.fnst@fujitsu.com: v2.2] Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-01 18:28:51 +03:00
return page->mapping == PAGE_MAPPING_DAX_SHARED;
}
/*
fsdax: introduce page->share for fsdax in reflink mode Patch series "fsdax,xfs: fix warning messages", v2. Many testcases failed in dax+reflink mode with warning message in dmesg. Such as generic/051,075,127. The warning message is like this: [ 775.509337] ------------[ cut here ]------------ [ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69 [ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse [ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d [ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014 [ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69 [ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48 [ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082 [ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042 [ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff [ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0 [ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320 [ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001 [ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0 [ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 775.531002] Call Trace: [ 775.531230] <TASK> [ 775.531444] dax_fault_iter+0x267/0x6c0 [ 775.531719] dax_iomap_pte_fault+0x198/0x3d0 [ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7] [ 775.532603] __do_fault+0x30/0x1e0 [ 775.532903] do_fault+0x314/0x6c0 [ 775.533166] __handle_mm_fault+0x646/0x1250 [ 775.533480] handle_mm_fault+0xc1/0x230 [ 775.533810] do_user_addr_fault+0x1ac/0x610 [ 775.534110] exc_page_fault+0x63/0x140 [ 775.534389] asm_exc_page_fault+0x22/0x30 [ 775.534678] RIP: 0033:0x7f39fc55820a [ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00 [ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202 [ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1 [ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040 [ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000 [ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001 [ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003 [ 775.538086] </TASK> [ 775.538333] ---[ end trace 0000000000000000 ]--- This also affects dax+noreflink mode if we run the test after a dax+reflink test. So, the most urgent thing is solving the warning messages. With these fixes, most warning messages in dax_associate_entry() are gone. But honestly, generic/388 will randomly failed with the warning. The case shutdown the xfs when fsstress is running, and do it for many times. I think the reason is that dax pages in use are not able to be invalidated in time when fs is shutdown. The next time dax page to be associated, it still remains the mapping value set last time. I'll keep on solving it. The warning message in dax_writeback_one() can also be fixed because of the dax unshare. This patch (of 8): fsdax page is used not only when CoW, but also mapread. To make the it easily understood, use 'share' to indicate that the dax page is shared by more than one extent. And add helper functions to use it. Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED. [ruansy.fnst@fujitsu.com: rename several functions] Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com [ruansy.fnst@fujitsu.com: v2.2] Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-01 18:28:51 +03:00
* Set the page->mapping with PAGE_MAPPING_DAX_SHARED flag, increase the
* refcount.
*/
fsdax: introduce page->share for fsdax in reflink mode Patch series "fsdax,xfs: fix warning messages", v2. Many testcases failed in dax+reflink mode with warning message in dmesg. Such as generic/051,075,127. The warning message is like this: [ 775.509337] ------------[ cut here ]------------ [ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69 [ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse [ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d [ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014 [ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69 [ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48 [ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082 [ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042 [ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff [ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0 [ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320 [ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001 [ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0 [ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 775.531002] Call Trace: [ 775.531230] <TASK> [ 775.531444] dax_fault_iter+0x267/0x6c0 [ 775.531719] dax_iomap_pte_fault+0x198/0x3d0 [ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7] [ 775.532603] __do_fault+0x30/0x1e0 [ 775.532903] do_fault+0x314/0x6c0 [ 775.533166] __handle_mm_fault+0x646/0x1250 [ 775.533480] handle_mm_fault+0xc1/0x230 [ 775.533810] do_user_addr_fault+0x1ac/0x610 [ 775.534110] exc_page_fault+0x63/0x140 [ 775.534389] asm_exc_page_fault+0x22/0x30 [ 775.534678] RIP: 0033:0x7f39fc55820a [ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00 [ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202 [ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1 [ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040 [ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000 [ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001 [ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003 [ 775.538086] </TASK> [ 775.538333] ---[ end trace 0000000000000000 ]--- This also affects dax+noreflink mode if we run the test after a dax+reflink test. So, the most urgent thing is solving the warning messages. With these fixes, most warning messages in dax_associate_entry() are gone. But honestly, generic/388 will randomly failed with the warning. The case shutdown the xfs when fsstress is running, and do it for many times. I think the reason is that dax pages in use are not able to be invalidated in time when fs is shutdown. The next time dax page to be associated, it still remains the mapping value set last time. I'll keep on solving it. The warning message in dax_writeback_one() can also be fixed because of the dax unshare. This patch (of 8): fsdax page is used not only when CoW, but also mapread. To make the it easily understood, use 'share' to indicate that the dax page is shared by more than one extent. And add helper functions to use it. Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED. [ruansy.fnst@fujitsu.com: rename several functions] Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com [ruansy.fnst@fujitsu.com: v2.2] Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-01 18:28:51 +03:00
static inline void dax_page_share_get(struct page *page)
{
fsdax: introduce page->share for fsdax in reflink mode Patch series "fsdax,xfs: fix warning messages", v2. Many testcases failed in dax+reflink mode with warning message in dmesg. Such as generic/051,075,127. The warning message is like this: [ 775.509337] ------------[ cut here ]------------ [ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69 [ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse [ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d [ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014 [ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69 [ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48 [ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082 [ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042 [ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff [ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0 [ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320 [ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001 [ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0 [ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 775.531002] Call Trace: [ 775.531230] <TASK> [ 775.531444] dax_fault_iter+0x267/0x6c0 [ 775.531719] dax_iomap_pte_fault+0x198/0x3d0 [ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7] [ 775.532603] __do_fault+0x30/0x1e0 [ 775.532903] do_fault+0x314/0x6c0 [ 775.533166] __handle_mm_fault+0x646/0x1250 [ 775.533480] handle_mm_fault+0xc1/0x230 [ 775.533810] do_user_addr_fault+0x1ac/0x610 [ 775.534110] exc_page_fault+0x63/0x140 [ 775.534389] asm_exc_page_fault+0x22/0x30 [ 775.534678] RIP: 0033:0x7f39fc55820a [ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00 [ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202 [ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1 [ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040 [ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000 [ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001 [ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003 [ 775.538086] </TASK> [ 775.538333] ---[ end trace 0000000000000000 ]--- This also affects dax+noreflink mode if we run the test after a dax+reflink test. So, the most urgent thing is solving the warning messages. With these fixes, most warning messages in dax_associate_entry() are gone. But honestly, generic/388 will randomly failed with the warning. The case shutdown the xfs when fsstress is running, and do it for many times. I think the reason is that dax pages in use are not able to be invalidated in time when fs is shutdown. The next time dax page to be associated, it still remains the mapping value set last time. I'll keep on solving it. The warning message in dax_writeback_one() can also be fixed because of the dax unshare. This patch (of 8): fsdax page is used not only when CoW, but also mapread. To make the it easily understood, use 'share' to indicate that the dax page is shared by more than one extent. And add helper functions to use it. Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED. [ruansy.fnst@fujitsu.com: rename several functions] Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com [ruansy.fnst@fujitsu.com: v2.2] Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-01 18:28:51 +03:00
if (page->mapping != PAGE_MAPPING_DAX_SHARED) {
/*
* Reset the index if the page was already mapped
* regularly before.
*/
if (page->mapping)
fsdax: introduce page->share for fsdax in reflink mode Patch series "fsdax,xfs: fix warning messages", v2. Many testcases failed in dax+reflink mode with warning message in dmesg. Such as generic/051,075,127. The warning message is like this: [ 775.509337] ------------[ cut here ]------------ [ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69 [ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse [ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d [ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014 [ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69 [ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48 [ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082 [ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042 [ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff [ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0 [ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320 [ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001 [ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0 [ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 775.531002] Call Trace: [ 775.531230] <TASK> [ 775.531444] dax_fault_iter+0x267/0x6c0 [ 775.531719] dax_iomap_pte_fault+0x198/0x3d0 [ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7] [ 775.532603] __do_fault+0x30/0x1e0 [ 775.532903] do_fault+0x314/0x6c0 [ 775.533166] __handle_mm_fault+0x646/0x1250 [ 775.533480] handle_mm_fault+0xc1/0x230 [ 775.533810] do_user_addr_fault+0x1ac/0x610 [ 775.534110] exc_page_fault+0x63/0x140 [ 775.534389] asm_exc_page_fault+0x22/0x30 [ 775.534678] RIP: 0033:0x7f39fc55820a [ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00 [ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202 [ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1 [ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040 [ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000 [ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001 [ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003 [ 775.538086] </TASK> [ 775.538333] ---[ end trace 0000000000000000 ]--- This also affects dax+noreflink mode if we run the test after a dax+reflink test. So, the most urgent thing is solving the warning messages. With these fixes, most warning messages in dax_associate_entry() are gone. But honestly, generic/388 will randomly failed with the warning. The case shutdown the xfs when fsstress is running, and do it for many times. I think the reason is that dax pages in use are not able to be invalidated in time when fs is shutdown. The next time dax page to be associated, it still remains the mapping value set last time. I'll keep on solving it. The warning message in dax_writeback_one() can also be fixed because of the dax unshare. This patch (of 8): fsdax page is used not only when CoW, but also mapread. To make the it easily understood, use 'share' to indicate that the dax page is shared by more than one extent. And add helper functions to use it. Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED. [ruansy.fnst@fujitsu.com: rename several functions] Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com [ruansy.fnst@fujitsu.com: v2.2] Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-01 18:28:51 +03:00
page->share = 1;
page->mapping = PAGE_MAPPING_DAX_SHARED;
}
fsdax: introduce page->share for fsdax in reflink mode Patch series "fsdax,xfs: fix warning messages", v2. Many testcases failed in dax+reflink mode with warning message in dmesg. Such as generic/051,075,127. The warning message is like this: [ 775.509337] ------------[ cut here ]------------ [ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69 [ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse [ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d [ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014 [ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69 [ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48 [ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082 [ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042 [ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff [ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0 [ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320 [ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001 [ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0 [ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 775.531002] Call Trace: [ 775.531230] <TASK> [ 775.531444] dax_fault_iter+0x267/0x6c0 [ 775.531719] dax_iomap_pte_fault+0x198/0x3d0 [ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7] [ 775.532603] __do_fault+0x30/0x1e0 [ 775.532903] do_fault+0x314/0x6c0 [ 775.533166] __handle_mm_fault+0x646/0x1250 [ 775.533480] handle_mm_fault+0xc1/0x230 [ 775.533810] do_user_addr_fault+0x1ac/0x610 [ 775.534110] exc_page_fault+0x63/0x140 [ 775.534389] asm_exc_page_fault+0x22/0x30 [ 775.534678] RIP: 0033:0x7f39fc55820a [ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00 [ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202 [ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1 [ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040 [ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000 [ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001 [ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003 [ 775.538086] </TASK> [ 775.538333] ---[ end trace 0000000000000000 ]--- This also affects dax+noreflink mode if we run the test after a dax+reflink test. So, the most urgent thing is solving the warning messages. With these fixes, most warning messages in dax_associate_entry() are gone. But honestly, generic/388 will randomly failed with the warning. The case shutdown the xfs when fsstress is running, and do it for many times. I think the reason is that dax pages in use are not able to be invalidated in time when fs is shutdown. The next time dax page to be associated, it still remains the mapping value set last time. I'll keep on solving it. The warning message in dax_writeback_one() can also be fixed because of the dax unshare. This patch (of 8): fsdax page is used not only when CoW, but also mapread. To make the it easily understood, use 'share' to indicate that the dax page is shared by more than one extent. And add helper functions to use it. Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED. [ruansy.fnst@fujitsu.com: rename several functions] Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com [ruansy.fnst@fujitsu.com: v2.2] Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-01 18:28:51 +03:00
page->share++;
}
static inline unsigned long dax_page_share_put(struct page *page)
{
return --page->share;
}
/*
fsdax: introduce page->share for fsdax in reflink mode Patch series "fsdax,xfs: fix warning messages", v2. Many testcases failed in dax+reflink mode with warning message in dmesg. Such as generic/051,075,127. The warning message is like this: [ 775.509337] ------------[ cut here ]------------ [ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69 [ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse [ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d [ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014 [ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69 [ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48 [ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082 [ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042 [ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff [ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0 [ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320 [ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001 [ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0 [ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 775.531002] Call Trace: [ 775.531230] <TASK> [ 775.531444] dax_fault_iter+0x267/0x6c0 [ 775.531719] dax_iomap_pte_fault+0x198/0x3d0 [ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7] [ 775.532603] __do_fault+0x30/0x1e0 [ 775.532903] do_fault+0x314/0x6c0 [ 775.533166] __handle_mm_fault+0x646/0x1250 [ 775.533480] handle_mm_fault+0xc1/0x230 [ 775.533810] do_user_addr_fault+0x1ac/0x610 [ 775.534110] exc_page_fault+0x63/0x140 [ 775.534389] asm_exc_page_fault+0x22/0x30 [ 775.534678] RIP: 0033:0x7f39fc55820a [ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00 [ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202 [ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1 [ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040 [ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000 [ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001 [ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003 [ 775.538086] </TASK> [ 775.538333] ---[ end trace 0000000000000000 ]--- This also affects dax+noreflink mode if we run the test after a dax+reflink test. So, the most urgent thing is solving the warning messages. With these fixes, most warning messages in dax_associate_entry() are gone. But honestly, generic/388 will randomly failed with the warning. The case shutdown the xfs when fsstress is running, and do it for many times. I think the reason is that dax pages in use are not able to be invalidated in time when fs is shutdown. The next time dax page to be associated, it still remains the mapping value set last time. I'll keep on solving it. The warning message in dax_writeback_one() can also be fixed because of the dax unshare. This patch (of 8): fsdax page is used not only when CoW, but also mapread. To make the it easily understood, use 'share' to indicate that the dax page is shared by more than one extent. And add helper functions to use it. Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED. [ruansy.fnst@fujitsu.com: rename several functions] Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com [ruansy.fnst@fujitsu.com: v2.2] Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-01 18:28:51 +03:00
* When it is called in dax_insert_entry(), the shared flag will indicate that
* whether this entry is shared by multiple files. If so, set the page->mapping
fsdax: introduce page->share for fsdax in reflink mode Patch series "fsdax,xfs: fix warning messages", v2. Many testcases failed in dax+reflink mode with warning message in dmesg. Such as generic/051,075,127. The warning message is like this: [ 775.509337] ------------[ cut here ]------------ [ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69 [ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse [ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d [ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014 [ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69 [ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48 [ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082 [ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042 [ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff [ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0 [ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320 [ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001 [ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0 [ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 775.531002] Call Trace: [ 775.531230] <TASK> [ 775.531444] dax_fault_iter+0x267/0x6c0 [ 775.531719] dax_iomap_pte_fault+0x198/0x3d0 [ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7] [ 775.532603] __do_fault+0x30/0x1e0 [ 775.532903] do_fault+0x314/0x6c0 [ 775.533166] __handle_mm_fault+0x646/0x1250 [ 775.533480] handle_mm_fault+0xc1/0x230 [ 775.533810] do_user_addr_fault+0x1ac/0x610 [ 775.534110] exc_page_fault+0x63/0x140 [ 775.534389] asm_exc_page_fault+0x22/0x30 [ 775.534678] RIP: 0033:0x7f39fc55820a [ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00 [ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202 [ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1 [ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040 [ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000 [ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001 [ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003 [ 775.538086] </TASK> [ 775.538333] ---[ end trace 0000000000000000 ]--- This also affects dax+noreflink mode if we run the test after a dax+reflink test. So, the most urgent thing is solving the warning messages. With these fixes, most warning messages in dax_associate_entry() are gone. But honestly, generic/388 will randomly failed with the warning. The case shutdown the xfs when fsstress is running, and do it for many times. I think the reason is that dax pages in use are not able to be invalidated in time when fs is shutdown. The next time dax page to be associated, it still remains the mapping value set last time. I'll keep on solving it. The warning message in dax_writeback_one() can also be fixed because of the dax unshare. This patch (of 8): fsdax page is used not only when CoW, but also mapread. To make the it easily understood, use 'share' to indicate that the dax page is shared by more than one extent. And add helper functions to use it. Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED. [ruansy.fnst@fujitsu.com: rename several functions] Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com [ruansy.fnst@fujitsu.com: v2.2] Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-01 18:28:51 +03:00
* PAGE_MAPPING_DAX_SHARED, and use page->share as refcount.
*/
static void dax_associate_entry(void *entry, struct address_space *mapping,
fsdax: introduce page->share for fsdax in reflink mode Patch series "fsdax,xfs: fix warning messages", v2. Many testcases failed in dax+reflink mode with warning message in dmesg. Such as generic/051,075,127. The warning message is like this: [ 775.509337] ------------[ cut here ]------------ [ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69 [ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse [ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d [ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014 [ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69 [ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48 [ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082 [ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042 [ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff [ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0 [ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320 [ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001 [ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0 [ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 775.531002] Call Trace: [ 775.531230] <TASK> [ 775.531444] dax_fault_iter+0x267/0x6c0 [ 775.531719] dax_iomap_pte_fault+0x198/0x3d0 [ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7] [ 775.532603] __do_fault+0x30/0x1e0 [ 775.532903] do_fault+0x314/0x6c0 [ 775.533166] __handle_mm_fault+0x646/0x1250 [ 775.533480] handle_mm_fault+0xc1/0x230 [ 775.533810] do_user_addr_fault+0x1ac/0x610 [ 775.534110] exc_page_fault+0x63/0x140 [ 775.534389] asm_exc_page_fault+0x22/0x30 [ 775.534678] RIP: 0033:0x7f39fc55820a [ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00 [ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202 [ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1 [ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040 [ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000 [ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001 [ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003 [ 775.538086] </TASK> [ 775.538333] ---[ end trace 0000000000000000 ]--- This also affects dax+noreflink mode if we run the test after a dax+reflink test. So, the most urgent thing is solving the warning messages. With these fixes, most warning messages in dax_associate_entry() are gone. But honestly, generic/388 will randomly failed with the warning. The case shutdown the xfs when fsstress is running, and do it for many times. I think the reason is that dax pages in use are not able to be invalidated in time when fs is shutdown. The next time dax page to be associated, it still remains the mapping value set last time. I'll keep on solving it. The warning message in dax_writeback_one() can also be fixed because of the dax unshare. This patch (of 8): fsdax page is used not only when CoW, but also mapread. To make the it easily understood, use 'share' to indicate that the dax page is shared by more than one extent. And add helper functions to use it. Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED. [ruansy.fnst@fujitsu.com: rename several functions] Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com [ruansy.fnst@fujitsu.com: v2.2] Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-01 18:28:51 +03:00
struct vm_area_struct *vma, unsigned long address, bool shared)
{
unsigned long size = dax_entry_size(entry), pfn, index;
int i = 0;
if (IS_ENABLED(CONFIG_FS_DAX_LIMITED))
return;
index = linear_page_index(vma, address & ~(size - 1));
for_each_mapped_pfn(entry, pfn) {
struct page *page = pfn_to_page(pfn);
fsdax: introduce page->share for fsdax in reflink mode Patch series "fsdax,xfs: fix warning messages", v2. Many testcases failed in dax+reflink mode with warning message in dmesg. Such as generic/051,075,127. The warning message is like this: [ 775.509337] ------------[ cut here ]------------ [ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69 [ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse [ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d [ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014 [ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69 [ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48 [ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082 [ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042 [ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff [ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0 [ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320 [ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001 [ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0 [ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 775.531002] Call Trace: [ 775.531230] <TASK> [ 775.531444] dax_fault_iter+0x267/0x6c0 [ 775.531719] dax_iomap_pte_fault+0x198/0x3d0 [ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7] [ 775.532603] __do_fault+0x30/0x1e0 [ 775.532903] do_fault+0x314/0x6c0 [ 775.533166] __handle_mm_fault+0x646/0x1250 [ 775.533480] handle_mm_fault+0xc1/0x230 [ 775.533810] do_user_addr_fault+0x1ac/0x610 [ 775.534110] exc_page_fault+0x63/0x140 [ 775.534389] asm_exc_page_fault+0x22/0x30 [ 775.534678] RIP: 0033:0x7f39fc55820a [ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00 [ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202 [ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1 [ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040 [ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000 [ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001 [ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003 [ 775.538086] </TASK> [ 775.538333] ---[ end trace 0000000000000000 ]--- This also affects dax+noreflink mode if we run the test after a dax+reflink test. So, the most urgent thing is solving the warning messages. With these fixes, most warning messages in dax_associate_entry() are gone. But honestly, generic/388 will randomly failed with the warning. The case shutdown the xfs when fsstress is running, and do it for many times. I think the reason is that dax pages in use are not able to be invalidated in time when fs is shutdown. The next time dax page to be associated, it still remains the mapping value set last time. I'll keep on solving it. The warning message in dax_writeback_one() can also be fixed because of the dax unshare. This patch (of 8): fsdax page is used not only when CoW, but also mapread. To make the it easily understood, use 'share' to indicate that the dax page is shared by more than one extent. And add helper functions to use it. Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED. [ruansy.fnst@fujitsu.com: rename several functions] Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com [ruansy.fnst@fujitsu.com: v2.2] Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-01 18:28:51 +03:00
if (shared) {
dax_page_share_get(page);
} else {
WARN_ON_ONCE(page->mapping);
page->mapping = mapping;
page->index = index + i++;
}
}
}
static void dax_disassociate_entry(void *entry, struct address_space *mapping,
bool trunc)
{
unsigned long pfn;
if (IS_ENABLED(CONFIG_FS_DAX_LIMITED))
return;
for_each_mapped_pfn(entry, pfn) {
struct page *page = pfn_to_page(pfn);
WARN_ON_ONCE(trunc && page_ref_count(page) > 1);
fsdax: introduce page->share for fsdax in reflink mode Patch series "fsdax,xfs: fix warning messages", v2. Many testcases failed in dax+reflink mode with warning message in dmesg. Such as generic/051,075,127. The warning message is like this: [ 775.509337] ------------[ cut here ]------------ [ 775.509636] WARNING: CPU: 1 PID: 16815 at fs/dax.c:386 dax_insert_entry.cold+0x2e/0x69 [ 775.510151] Modules linked in: auth_rpcgss oid_registry nfsv4 algif_hash af_alg af_packet nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter ip_tables x_tables dax_pmem nd_pmem nd_btt sch_fq_codel configfs xfs libcrc32c fuse [ 775.524288] CPU: 1 PID: 16815 Comm: fsx Kdump: loaded Tainted: G W 6.1.0-rc4+ #164 eb34e4ee4200c7cbbb47de2b1892c5a3e027fd6d [ 775.524904] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.0-3-3 04/01/2014 [ 775.525460] RIP: 0010:dax_insert_entry.cold+0x2e/0x69 [ 775.525797] Code: c7 c7 18 eb e0 81 48 89 4c 24 20 48 89 54 24 10 e8 73 6d ff ff 48 83 7d 18 00 48 8b 54 24 10 48 8b 4c 24 20 0f 84 e3 e9 b9 ff <0f> 0b e9 dc e9 b9 ff 48 c7 c6 a0 20 c3 81 48 c7 c7 f0 ea e0 81 48 [ 775.526708] RSP: 0000:ffffc90001d57b30 EFLAGS: 00010082 [ 775.527042] RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000042 [ 775.527396] RDX: ffffea000a0f6c80 RSI: ffffffff81dfab1b RDI: 00000000ffffffff [ 775.527819] RBP: ffffea000a0f6c40 R08: 0000000000000000 R09: ffffffff820625e0 [ 775.528241] R10: ffffc90001d579d8 R11: ffffffff820d2628 R12: ffff88815fc98320 [ 775.528598] R13: ffffc90001d57c18 R14: 0000000000000000 R15: 0000000000000001 [ 775.528997] FS: 00007f39fc75d740(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 775.529474] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 775.529800] CR2: 00007f39fc772040 CR3: 0000000107eb6001 CR4: 00000000003706e0 [ 775.530214] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 775.530592] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 775.531002] Call Trace: [ 775.531230] <TASK> [ 775.531444] dax_fault_iter+0x267/0x6c0 [ 775.531719] dax_iomap_pte_fault+0x198/0x3d0 [ 775.532002] __xfs_filemap_fault+0x24a/0x2d0 [xfs aa8d25411432b306d9554da38096f4ebb86bdfe7] [ 775.532603] __do_fault+0x30/0x1e0 [ 775.532903] do_fault+0x314/0x6c0 [ 775.533166] __handle_mm_fault+0x646/0x1250 [ 775.533480] handle_mm_fault+0xc1/0x230 [ 775.533810] do_user_addr_fault+0x1ac/0x610 [ 775.534110] exc_page_fault+0x63/0x140 [ 775.534389] asm_exc_page_fault+0x22/0x30 [ 775.534678] RIP: 0033:0x7f39fc55820a [ 775.534950] Code: 00 01 00 00 00 74 99 83 f9 c0 0f 87 7b fe ff ff c5 fe 6f 4e 20 48 29 fe 48 83 c7 3f 49 8d 0c 10 48 83 e7 c0 48 01 fe 48 29 f9 <f3> a4 c4 c1 7e 7f 00 c4 c1 7e 7f 48 20 c5 f8 77 c3 0f 1f 44 00 00 [ 775.535839] RSP: 002b:00007ffc66a08118 EFLAGS: 00010202 [ 775.536157] RAX: 00007f39fc772001 RBX: 0000000000042001 RCX: 00000000000063c1 [ 775.536537] RDX: 0000000000006400 RSI: 00007f39fac42050 RDI: 00007f39fc772040 [ 775.536919] RBP: 0000000000006400 R08: 00007f39fc772001 R09: 0000000000042000 [ 775.537304] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000001 [ 775.537694] R13: 00007f39fc772000 R14: 0000000000006401 R15: 0000000000000003 [ 775.538086] </TASK> [ 775.538333] ---[ end trace 0000000000000000 ]--- This also affects dax+noreflink mode if we run the test after a dax+reflink test. So, the most urgent thing is solving the warning messages. With these fixes, most warning messages in dax_associate_entry() are gone. But honestly, generic/388 will randomly failed with the warning. The case shutdown the xfs when fsstress is running, and do it for many times. I think the reason is that dax pages in use are not able to be invalidated in time when fs is shutdown. The next time dax page to be associated, it still remains the mapping value set last time. I'll keep on solving it. The warning message in dax_writeback_one() can also be fixed because of the dax unshare. This patch (of 8): fsdax page is used not only when CoW, but also mapread. To make the it easily understood, use 'share' to indicate that the dax page is shared by more than one extent. And add helper functions to use it. Also, the flag needs to be renamed to PAGE_MAPPING_DAX_SHARED. [ruansy.fnst@fujitsu.com: rename several functions] Link: https://lkml.kernel.org/r/1669972991-246-1-git-send-email-ruansy.fnst@fujitsu.com [ruansy.fnst@fujitsu.com: v2.2] Link: https://lkml.kernel.org/r/1670381359-53-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-1-git-send-email-ruansy.fnst@fujitsu.com Link: https://lkml.kernel.org/r/1669908538-55-2-git-send-email-ruansy.fnst@fujitsu.com Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-01 18:28:51 +03:00
if (dax_page_is_shared(page)) {
/* keep the shared flag if this page is still shared */
if (dax_page_share_put(page) > 0)
continue;
} else
WARN_ON_ONCE(page->mapping && page->mapping != mapping);
page->mapping = NULL;
page->index = 0;
}
}
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
static struct page *dax_busy_page(void *entry)
{
unsigned long pfn;
for_each_mapped_pfn(entry, pfn) {
struct page *page = pfn_to_page(pfn);
if (page_ref_count(page) > 1)
return page;
}
return NULL;
}
/*
* dax_lock_page - Lock the DAX entry corresponding to a page
* @page: The page whose entry we want to lock
*
* Context: Process context.
dax: Fix unlock mismatch with updated API Internal to dax_unlock_mapping_entry(), dax_unlock_entry() is used to store a replacement entry in the Xarray at the given xas-index with the DAX_LOCKED bit clear. When called, dax_unlock_entry() expects the unlocked value of the entry relative to the current Xarray state to be specified. In most contexts dax_unlock_entry() is operating in the same scope as the matched dax_lock_entry(). However, in the dax_unlock_mapping_entry() case the implementation needs to recall the original entry. In the case where the original entry is a 'pmd' entry it is possible that the pfn performed to do the lookup is misaligned to the value retrieved in the Xarray. Change the api to return the unlock cookie from dax_lock_page() and pass it to dax_unlock_page(). This fixes a bug where dax_unlock_page() was assuming that the page was PMD-aligned if the entry was a PMD entry with signatures like: WARNING: CPU: 38 PID: 1396 at fs/dax.c:340 dax_insert_entry+0x2b2/0x2d0 RIP: 0010:dax_insert_entry+0x2b2/0x2d0 [..] Call Trace: dax_iomap_pte_fault.isra.41+0x791/0xde0 ext4_dax_huge_fault+0x16f/0x1f0 ? up_read+0x1c/0xa0 __do_fault+0x1f/0x160 __handle_mm_fault+0x1033/0x1490 handle_mm_fault+0x18b/0x3d0 Link: https://lkml.kernel.org/r/20181130154902.GL10377@bombadil.infradead.org Fixes: 9f32d221301c ("dax: Convert dax_lock_mapping_entry to XArray") Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-11-30 19:05:06 +03:00
* Return: A cookie to pass to dax_unlock_page() or 0 if the entry could
* not be locked.
*/
dax: Fix unlock mismatch with updated API Internal to dax_unlock_mapping_entry(), dax_unlock_entry() is used to store a replacement entry in the Xarray at the given xas-index with the DAX_LOCKED bit clear. When called, dax_unlock_entry() expects the unlocked value of the entry relative to the current Xarray state to be specified. In most contexts dax_unlock_entry() is operating in the same scope as the matched dax_lock_entry(). However, in the dax_unlock_mapping_entry() case the implementation needs to recall the original entry. In the case where the original entry is a 'pmd' entry it is possible that the pfn performed to do the lookup is misaligned to the value retrieved in the Xarray. Change the api to return the unlock cookie from dax_lock_page() and pass it to dax_unlock_page(). This fixes a bug where dax_unlock_page() was assuming that the page was PMD-aligned if the entry was a PMD entry with signatures like: WARNING: CPU: 38 PID: 1396 at fs/dax.c:340 dax_insert_entry+0x2b2/0x2d0 RIP: 0010:dax_insert_entry+0x2b2/0x2d0 [..] Call Trace: dax_iomap_pte_fault.isra.41+0x791/0xde0 ext4_dax_huge_fault+0x16f/0x1f0 ? up_read+0x1c/0xa0 __do_fault+0x1f/0x160 __handle_mm_fault+0x1033/0x1490 handle_mm_fault+0x18b/0x3d0 Link: https://lkml.kernel.org/r/20181130154902.GL10377@bombadil.infradead.org Fixes: 9f32d221301c ("dax: Convert dax_lock_mapping_entry to XArray") Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-11-30 19:05:06 +03:00
dax_entry_t dax_lock_page(struct page *page)
{
XA_STATE(xas, NULL, 0);
void *entry;
/* Ensure page->mapping isn't freed while we look at it */
rcu_read_lock();
for (;;) {
struct address_space *mapping = READ_ONCE(page->mapping);
dax: Fix unlock mismatch with updated API Internal to dax_unlock_mapping_entry(), dax_unlock_entry() is used to store a replacement entry in the Xarray at the given xas-index with the DAX_LOCKED bit clear. When called, dax_unlock_entry() expects the unlocked value of the entry relative to the current Xarray state to be specified. In most contexts dax_unlock_entry() is operating in the same scope as the matched dax_lock_entry(). However, in the dax_unlock_mapping_entry() case the implementation needs to recall the original entry. In the case where the original entry is a 'pmd' entry it is possible that the pfn performed to do the lookup is misaligned to the value retrieved in the Xarray. Change the api to return the unlock cookie from dax_lock_page() and pass it to dax_unlock_page(). This fixes a bug where dax_unlock_page() was assuming that the page was PMD-aligned if the entry was a PMD entry with signatures like: WARNING: CPU: 38 PID: 1396 at fs/dax.c:340 dax_insert_entry+0x2b2/0x2d0 RIP: 0010:dax_insert_entry+0x2b2/0x2d0 [..] Call Trace: dax_iomap_pte_fault.isra.41+0x791/0xde0 ext4_dax_huge_fault+0x16f/0x1f0 ? up_read+0x1c/0xa0 __do_fault+0x1f/0x160 __handle_mm_fault+0x1033/0x1490 handle_mm_fault+0x18b/0x3d0 Link: https://lkml.kernel.org/r/20181130154902.GL10377@bombadil.infradead.org Fixes: 9f32d221301c ("dax: Convert dax_lock_mapping_entry to XArray") Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-11-30 19:05:06 +03:00
entry = NULL;
if (!mapping || !dax_mapping(mapping))
break;
/*
* In the device-dax case there's no need to lock, a
* struct dev_pagemap pin is sufficient to keep the
* inode alive, and we assume we have dev_pagemap pin
* otherwise we would not have a valid pfn_to_page()
* translation.
*/
dax: Fix unlock mismatch with updated API Internal to dax_unlock_mapping_entry(), dax_unlock_entry() is used to store a replacement entry in the Xarray at the given xas-index with the DAX_LOCKED bit clear. When called, dax_unlock_entry() expects the unlocked value of the entry relative to the current Xarray state to be specified. In most contexts dax_unlock_entry() is operating in the same scope as the matched dax_lock_entry(). However, in the dax_unlock_mapping_entry() case the implementation needs to recall the original entry. In the case where the original entry is a 'pmd' entry it is possible that the pfn performed to do the lookup is misaligned to the value retrieved in the Xarray. Change the api to return the unlock cookie from dax_lock_page() and pass it to dax_unlock_page(). This fixes a bug where dax_unlock_page() was assuming that the page was PMD-aligned if the entry was a PMD entry with signatures like: WARNING: CPU: 38 PID: 1396 at fs/dax.c:340 dax_insert_entry+0x2b2/0x2d0 RIP: 0010:dax_insert_entry+0x2b2/0x2d0 [..] Call Trace: dax_iomap_pte_fault.isra.41+0x791/0xde0 ext4_dax_huge_fault+0x16f/0x1f0 ? up_read+0x1c/0xa0 __do_fault+0x1f/0x160 __handle_mm_fault+0x1033/0x1490 handle_mm_fault+0x18b/0x3d0 Link: https://lkml.kernel.org/r/20181130154902.GL10377@bombadil.infradead.org Fixes: 9f32d221301c ("dax: Convert dax_lock_mapping_entry to XArray") Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-11-30 19:05:06 +03:00
entry = (void *)~0UL;
if (S_ISCHR(mapping->host->i_mode))
break;
xas.xa = &mapping->i_pages;
xas_lock_irq(&xas);
if (mapping != page->mapping) {
xas_unlock_irq(&xas);
continue;
}
xas_set(&xas, page->index);
entry = xas_load(&xas);
if (dax_is_locked(entry)) {
rcu_read_unlock();
wait_entry_unlocked(&xas, entry);
rcu_read_lock();
continue;
}
dax_lock_entry(&xas, entry);
xas_unlock_irq(&xas);
break;
}
rcu_read_unlock();
dax: Fix unlock mismatch with updated API Internal to dax_unlock_mapping_entry(), dax_unlock_entry() is used to store a replacement entry in the Xarray at the given xas-index with the DAX_LOCKED bit clear. When called, dax_unlock_entry() expects the unlocked value of the entry relative to the current Xarray state to be specified. In most contexts dax_unlock_entry() is operating in the same scope as the matched dax_lock_entry(). However, in the dax_unlock_mapping_entry() case the implementation needs to recall the original entry. In the case where the original entry is a 'pmd' entry it is possible that the pfn performed to do the lookup is misaligned to the value retrieved in the Xarray. Change the api to return the unlock cookie from dax_lock_page() and pass it to dax_unlock_page(). This fixes a bug where dax_unlock_page() was assuming that the page was PMD-aligned if the entry was a PMD entry with signatures like: WARNING: CPU: 38 PID: 1396 at fs/dax.c:340 dax_insert_entry+0x2b2/0x2d0 RIP: 0010:dax_insert_entry+0x2b2/0x2d0 [..] Call Trace: dax_iomap_pte_fault.isra.41+0x791/0xde0 ext4_dax_huge_fault+0x16f/0x1f0 ? up_read+0x1c/0xa0 __do_fault+0x1f/0x160 __handle_mm_fault+0x1033/0x1490 handle_mm_fault+0x18b/0x3d0 Link: https://lkml.kernel.org/r/20181130154902.GL10377@bombadil.infradead.org Fixes: 9f32d221301c ("dax: Convert dax_lock_mapping_entry to XArray") Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-11-30 19:05:06 +03:00
return (dax_entry_t)entry;
}
dax: Fix unlock mismatch with updated API Internal to dax_unlock_mapping_entry(), dax_unlock_entry() is used to store a replacement entry in the Xarray at the given xas-index with the DAX_LOCKED bit clear. When called, dax_unlock_entry() expects the unlocked value of the entry relative to the current Xarray state to be specified. In most contexts dax_unlock_entry() is operating in the same scope as the matched dax_lock_entry(). However, in the dax_unlock_mapping_entry() case the implementation needs to recall the original entry. In the case where the original entry is a 'pmd' entry it is possible that the pfn performed to do the lookup is misaligned to the value retrieved in the Xarray. Change the api to return the unlock cookie from dax_lock_page() and pass it to dax_unlock_page(). This fixes a bug where dax_unlock_page() was assuming that the page was PMD-aligned if the entry was a PMD entry with signatures like: WARNING: CPU: 38 PID: 1396 at fs/dax.c:340 dax_insert_entry+0x2b2/0x2d0 RIP: 0010:dax_insert_entry+0x2b2/0x2d0 [..] Call Trace: dax_iomap_pte_fault.isra.41+0x791/0xde0 ext4_dax_huge_fault+0x16f/0x1f0 ? up_read+0x1c/0xa0 __do_fault+0x1f/0x160 __handle_mm_fault+0x1033/0x1490 handle_mm_fault+0x18b/0x3d0 Link: https://lkml.kernel.org/r/20181130154902.GL10377@bombadil.infradead.org Fixes: 9f32d221301c ("dax: Convert dax_lock_mapping_entry to XArray") Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-11-30 19:05:06 +03:00
void dax_unlock_page(struct page *page, dax_entry_t cookie)
{
struct address_space *mapping = page->mapping;
XA_STATE(xas, &mapping->i_pages, page->index);
if (S_ISCHR(mapping->host->i_mode))
return;
dax: Fix unlock mismatch with updated API Internal to dax_unlock_mapping_entry(), dax_unlock_entry() is used to store a replacement entry in the Xarray at the given xas-index with the DAX_LOCKED bit clear. When called, dax_unlock_entry() expects the unlocked value of the entry relative to the current Xarray state to be specified. In most contexts dax_unlock_entry() is operating in the same scope as the matched dax_lock_entry(). However, in the dax_unlock_mapping_entry() case the implementation needs to recall the original entry. In the case where the original entry is a 'pmd' entry it is possible that the pfn performed to do the lookup is misaligned to the value retrieved in the Xarray. Change the api to return the unlock cookie from dax_lock_page() and pass it to dax_unlock_page(). This fixes a bug where dax_unlock_page() was assuming that the page was PMD-aligned if the entry was a PMD entry with signatures like: WARNING: CPU: 38 PID: 1396 at fs/dax.c:340 dax_insert_entry+0x2b2/0x2d0 RIP: 0010:dax_insert_entry+0x2b2/0x2d0 [..] Call Trace: dax_iomap_pte_fault.isra.41+0x791/0xde0 ext4_dax_huge_fault+0x16f/0x1f0 ? up_read+0x1c/0xa0 __do_fault+0x1f/0x160 __handle_mm_fault+0x1033/0x1490 handle_mm_fault+0x18b/0x3d0 Link: https://lkml.kernel.org/r/20181130154902.GL10377@bombadil.infradead.org Fixes: 9f32d221301c ("dax: Convert dax_lock_mapping_entry to XArray") Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-11-30 19:05:06 +03:00
dax_unlock_entry(&xas, (void *)cookie);
}
/*
* dax_lock_mapping_entry - Lock the DAX entry corresponding to a mapping
* @mapping: the file's mapping whose entry we want to lock
* @index: the offset within this file
* @page: output the dax page corresponding to this dax entry
*
* Return: A cookie to pass to dax_unlock_mapping_entry() or 0 if the entry
* could not be locked.
*/
dax_entry_t dax_lock_mapping_entry(struct address_space *mapping, pgoff_t index,
struct page **page)
{
XA_STATE(xas, NULL, 0);
void *entry;
rcu_read_lock();
for (;;) {
entry = NULL;
if (!dax_mapping(mapping))
break;
xas.xa = &mapping->i_pages;
xas_lock_irq(&xas);
xas_set(&xas, index);
entry = xas_load(&xas);
if (dax_is_locked(entry)) {
rcu_read_unlock();
wait_entry_unlocked(&xas, entry);
rcu_read_lock();
continue;
}
if (!entry ||
dax_is_zero_entry(entry) || dax_is_empty_entry(entry)) {
/*
* Because we are looking for entry from file's mapping
* and index, so the entry may not be inserted for now,
* or even a zero/empty entry. We don't think this is
* an error case. So, return a special value and do
* not output @page.
*/
entry = (void *)~0UL;
} else {
*page = pfn_to_page(dax_to_pfn(entry));
dax_lock_entry(&xas, entry);
}
xas_unlock_irq(&xas);
break;
}
rcu_read_unlock();
return (dax_entry_t)entry;
}
void dax_unlock_mapping_entry(struct address_space *mapping, pgoff_t index,
dax_entry_t cookie)
{
XA_STATE(xas, &mapping->i_pages, index);
if (cookie == ~0UL)
return;
dax_unlock_entry(&xas, (void *)cookie);
}
/*
* Find page cache entry at given index. If it is a DAX entry, return it
* with the entry locked. If the page cache doesn't contain an entry at
* that index, add a locked empty entry.
*
* When requesting an entry with size DAX_PMD, grab_mapping_entry() will
* either return that locked entry or will return VM_FAULT_FALLBACK.
* This will happen if there are any PTE entries within the PMD range
* that we are requesting.
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
*
* We always favor PTE entries over PMD entries. There isn't a flow where we
* evict PTE entries in order to 'upgrade' them to a PMD entry. A PMD
* insertion will fail if it finds any PTE entries already in the tree, and a
* PTE insertion will cause an existing PMD entry to be unmapped and
* downgraded to PTE entries. This happens for both PMD zero pages as
* well as PMD empty entries.
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
*
* The exception to this downgrade path is for PMD entries that have
* real storage backing them. We will leave these real PMD entries in
* the tree, and PTE writes will simply dirty the entire PMD entry.
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
*
* Note: Unlike filemap_fault() we don't honor FAULT_FLAG_RETRY flags. For
* persistent memory the benefit is doubtful. We can add that later if we can
* show it helps.
*
* On error, this function does not return an ERR_PTR. Instead it returns
* a VM_FAULT code, encoded as an xarray internal entry. The ERR_PTR values
* overlap with xarray value entries.
*/
static void *grab_mapping_entry(struct xa_state *xas,
struct address_space *mapping, unsigned int order)
{
unsigned long index = xas->xa_index;
bool pmd_downgrade; /* splitting PMD entry into PTE entries? */
void *entry;
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
retry:
pmd_downgrade = false;
xas_lock_irq(xas);
entry = get_unlocked_entry(xas, order);
dax: use common 4k zero page for dax mmap reads When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. This is easily visible by looking at the overall memory consumption of the system or by looking at /proc/[pid]/smaps: 7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 1048576 kB Private_Dirty: 0 kB Referenced: 1048576 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. Here are the average latencies of dax_load_hole() as measured by ftrace on a random test box: Old method, using zeroed page cache pages: 3.4 us New method, using the common 4k zero page: 0.8 us This was the average latency over 1 GiB of sequential reads done by this simple fio script: [global] size=1G filename=/root/dax/data fallocate=none [io] rw=read ioengine=mmap 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. Solve these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. As with the PMD code we will now insert a DAX exceptional entry into the radix tree instead of a struct page pointer which allows us to remove all the special casing in the DAX code. Note that we do still pretty aggressively check for regular pages in the DAX radix tree, especially where we take action based on the bits set in the page. If we ever find a regular page in our radix tree now that most likely means that someone besides DAX is inserting pages (which has happened lots of times in the past), and we want to find that out early and fail loudly. This solution also removes the extra memory consumption. Here is that same /proc/[pid]/smaps after 1GiB of reading from a hole with the new code: 7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 0 kB Pss: 0 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 0 kB Referenced: 0 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB Overall system memory consumption is similarly improved. Another major change is that we remove dax_pfn_mkwrite() from our fault flow, and instead rely on the page fault itself to make the PTE dirty and writeable. The following description from the patch adding the vm_insert_mixed_mkwrite() call explains this a little more: "To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path" Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:18:43 +03:00
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
if (entry) {
if (dax_is_conflict(entry))
goto fallback;
if (!xa_is_value(entry)) {
xas_set_err(xas, -EIO);
goto out_unlock;
}
if (order == 0) {
dax: use common 4k zero page for dax mmap reads When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. This is easily visible by looking at the overall memory consumption of the system or by looking at /proc/[pid]/smaps: 7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 1048576 kB Private_Dirty: 0 kB Referenced: 1048576 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. Here are the average latencies of dax_load_hole() as measured by ftrace on a random test box: Old method, using zeroed page cache pages: 3.4 us New method, using the common 4k zero page: 0.8 us This was the average latency over 1 GiB of sequential reads done by this simple fio script: [global] size=1G filename=/root/dax/data fallocate=none [io] rw=read ioengine=mmap 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. Solve these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. As with the PMD code we will now insert a DAX exceptional entry into the radix tree instead of a struct page pointer which allows us to remove all the special casing in the DAX code. Note that we do still pretty aggressively check for regular pages in the DAX radix tree, especially where we take action based on the bits set in the page. If we ever find a regular page in our radix tree now that most likely means that someone besides DAX is inserting pages (which has happened lots of times in the past), and we want to find that out early and fail loudly. This solution also removes the extra memory consumption. Here is that same /proc/[pid]/smaps after 1GiB of reading from a hole with the new code: 7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 0 kB Pss: 0 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 0 kB Referenced: 0 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB Overall system memory consumption is similarly improved. Another major change is that we remove dax_pfn_mkwrite() from our fault flow, and instead rely on the page fault itself to make the PTE dirty and writeable. The following description from the patch adding the vm_insert_mixed_mkwrite() call explains this a little more: "To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path" Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:18:43 +03:00
if (dax_is_pmd_entry(entry) &&
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
(dax_is_zero_entry(entry) ||
dax_is_empty_entry(entry))) {
pmd_downgrade = true;
}
}
}
if (pmd_downgrade) {
/*
* Make sure 'entry' remains valid while we drop
* the i_pages lock.
*/
dax_lock_entry(xas, entry);
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
/*
* Besides huge zero pages the only other thing that gets
* downgraded are empty entries which don't need to be
* unmapped.
*/
if (dax_is_zero_entry(entry)) {
xas_unlock_irq(xas);
unmap_mapping_pages(mapping,
xas->xa_index & ~PG_PMD_COLOUR,
PG_PMD_NR, false);
xas_reset(xas);
xas_lock_irq(xas);
dax: fix radix tree insertion race While running generic/340 in my test setup I hit the following race. It can happen with kernels that support FS DAX PMDs, so v4.10 thru v4.11-rc5. Thread 1 Thread 2 -------- -------- dax_iomap_pmd_fault() grab_mapping_entry() spin_lock_irq() get_unlocked_mapping_entry() 'entry' is NULL, can't call lock_slot() spin_unlock_irq() radix_tree_preload() dax_iomap_pmd_fault() grab_mapping_entry() spin_lock_irq() get_unlocked_mapping_entry() ... lock_slot() spin_unlock_irq() dax_pmd_insert_mapping() <inserts a PMD mapping> spin_lock_irq() __radix_tree_insert() fails with -EEXIST <fall back to 4k fault, and die horribly when inserting a 4k entry where a PMD exists> The issue is that we have to drop mapping->tree_lock while calling radix_tree_preload(), but since we didn't have a radix tree entry to lock (unlike in the pmd_downgrade case) we have no protection against Thread 2 coming along and inserting a PMD at the same index. For 4k entries we handled this with a special-case response to -EEXIST coming from the __radix_tree_insert(), but this doesn't save us for PMDs because the -EEXIST case can also mean that we collided with a 4k entry in the radix tree at a different index, but one that is covered by our PMD range. So, correctly handle both the 4k and 2M collision cases by explicitly re-checking the radix tree for an entry at our index once we reacquire mapping->tree_lock. This patch has made it through a clean xfstests run with the current v4.11-rc5 based linux/master, and it also ran generic/340 500 times in a loop. It used to fail within the first 10 iterations. Link: http://lkml.kernel.org/r/20170406212944.2866-1-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: <stable@vger.kernel.org> [4.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-08 02:04:57 +03:00
}
dax_disassociate_entry(entry, mapping, false);
xas_store(xas, NULL); /* undo the PMD join */
dax_wake_entry(xas, entry, WAKE_ALL);
mapping->nrpages -= PG_PMD_NR;
entry = NULL;
xas_set(xas, index);
}
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
if (entry) {
dax_lock_entry(xas, entry);
} else {
unsigned long flags = DAX_EMPTY;
if (order > 0)
flags |= DAX_PMD;
entry = dax_make_entry(pfn_to_pfn_t(0), flags);
dax_lock_entry(xas, entry);
if (xas_error(xas))
goto out_unlock;
mapping->nrpages += 1UL << order;
}
out_unlock:
xas_unlock_irq(xas);
if (xas_nomem(xas, mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM))
goto retry;
if (xas->xa_node == XA_ERROR(-ENOMEM))
return xa_mk_internal(VM_FAULT_OOM);
if (xas_error(xas))
return xa_mk_internal(VM_FAULT_SIGBUS);
return entry;
fallback:
xas_unlock_irq(xas);
return xa_mk_internal(VM_FAULT_FALLBACK);
}
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
/**
* dax_layout_busy_page_range - find first pinned page in @mapping
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
* @mapping: address space to scan for a page with ref count > 1
* @start: Starting offset. Page containing 'start' is included.
* @end: End offset. Page containing 'end' is included. If 'end' is LLONG_MAX,
* pages from 'start' till the end of file are included.
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
*
* DAX requires ZONE_DEVICE mapped pages. These pages are never
* 'onlined' to the page allocator so they are considered idle when
* page->count == 1. A filesystem uses this interface to determine if
* any page in the mapping is busy, i.e. for DMA, or other
* get_user_pages() usages.
*
* It is expected that the filesystem is holding locks to block the
* establishment of new mappings in this address_space. I.e. it expects
* to be able to run unmap_mapping_range() and subsequently not race
* mapping_mapped() becoming true.
*/
struct page *dax_layout_busy_page_range(struct address_space *mapping,
loff_t start, loff_t end)
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
{
void *entry;
unsigned int scanned = 0;
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
struct page *page = NULL;
pgoff_t start_idx = start >> PAGE_SHIFT;
pgoff_t end_idx;
XA_STATE(xas, &mapping->i_pages, start_idx);
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
/*
* In the 'limited' case get_user_pages() for dax is disabled.
*/
if (IS_ENABLED(CONFIG_FS_DAX_LIMITED))
return NULL;
if (!dax_mapping(mapping) || !mapping_mapped(mapping))
return NULL;
/* If end == LLONG_MAX, all pages from start to till end of file */
if (end == LLONG_MAX)
end_idx = ULONG_MAX;
else
end_idx = end >> PAGE_SHIFT;
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
/*
* If we race get_user_pages_fast() here either we'll see the
* elevated page count in the iteration and wait, or
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
* get_user_pages_fast() will see that the page it took a reference
* against is no longer mapped in the page tables and bail to the
* get_user_pages() slow path. The slow path is protected by
* pte_lock() and pmd_lock(). New references are not taken without
* holding those locks, and unmap_mapping_pages() will not zero the
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
* pte or pmd without holding the respective lock, so we are
* guaranteed to either see new references or prevent new
* references from being established.
*/
unmap_mapping_pages(mapping, start_idx, end_idx - start_idx + 1, 0);
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
xas_lock_irq(&xas);
xas_for_each(&xas, entry, end_idx) {
if (WARN_ON_ONCE(!xa_is_value(entry)))
continue;
if (unlikely(dax_is_locked(entry)))
entry = get_unlocked_entry(&xas, 0);
if (entry)
page = dax_busy_page(entry);
put_unlocked_entry(&xas, entry, WAKE_NEXT);
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
if (page)
break;
if (++scanned % XA_CHECK_SCHED)
continue;
xas_pause(&xas);
xas_unlock_irq(&xas);
cond_resched();
xas_lock_irq(&xas);
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
}
xas_unlock_irq(&xas);
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
return page;
}
EXPORT_SYMBOL_GPL(dax_layout_busy_page_range);
struct page *dax_layout_busy_page(struct address_space *mapping)
{
return dax_layout_busy_page_range(mapping, 0, LLONG_MAX);
}
mm, fs, dax: handle layout changes to pinned dax mappings Background: get_user_pages() in the filesystem pins file backed memory pages for access by devices performing dma. However, it only pins the memory pages not the page-to-file offset association. If a file is truncated the pages are mapped out of the file and dma may continue indefinitely into a page that is owned by a device driver. This breaks coherency of the file vs dma, but the assumption is that if userspace wants the file-space truncated it does not matter what data is inbound from the device, it is not relevant anymore. The only expectation is that dma can safely continue while the filesystem reallocates the block(s). Problem: This expectation that dma can safely continue while the filesystem changes the block map is broken by dax. With dax the target dma page *is* the filesystem block. The model of leaving the page pinned for dma, but truncating the file block out of the file, means that the filesytem is free to reallocate a block under active dma to another file and now the expected data-incoherency situation has turned into active data-corruption. Solution: Defer all filesystem operations (fallocate(), truncate()) on a dax mode file while any page/block in the file is under active dma. This solution assumes that dma is transient. Cases where dma operations are known to not be transient, like RDMA, have been explicitly disabled via commits like 5f1d43de5416 "IB/core: disable memory registration of filesystem-dax vmas". The dax_layout_busy_page() routine is called by filesystems with a lock held against mm faults (i_mmap_lock) to find pinned / busy dax pages. The process of looking up a busy page invalidates all mappings to trigger any subsequent get_user_pages() to block on i_mmap_lock. The filesystem continues to call dax_layout_busy_page() until it finally returns no more active pages. This approach assumes that the page pinning is transient, if that assumption is violated the system would have likely hung from the uncompleted I/O. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-10 04:44:31 +03:00
EXPORT_SYMBOL_GPL(dax_layout_busy_page);
static int __dax_invalidate_entry(struct address_space *mapping,
pgoff_t index, bool trunc)
{
XA_STATE(xas, &mapping->i_pages, index);
int ret = 0;
void *entry;
xas_lock_irq(&xas);
entry = get_unlocked_entry(&xas, 0);
if (!entry || WARN_ON_ONCE(!xa_is_value(entry)))
goto out;
if (!trunc &&
(xas_get_mark(&xas, PAGECACHE_TAG_DIRTY) ||
xas_get_mark(&xas, PAGECACHE_TAG_TOWRITE)))
goto out;
dax_disassociate_entry(entry, mapping, trunc);
xas_store(&xas, NULL);
mapping->nrpages -= 1UL << dax_entry_order(entry);
ret = 1;
out:
dax: Wake up all waiters after invalidating dax entry I am seeing missed wakeups which ultimately lead to a deadlock when I am using virtiofs with DAX enabled and running "make -j". I had to mount virtiofs as rootfs and also reduce to dax window size to 256M to reproduce the problem consistently. So here is the problem. put_unlocked_entry() wakes up waiters only if entry is not null as well as !dax_is_conflict(entry). But if I call multiple instances of invalidate_inode_pages2() in parallel, then I can run into a situation where there are waiters on this index but nobody will wake these waiters. invalidate_inode_pages2() invalidate_inode_pages2_range() invalidate_exceptional_entry2() dax_invalidate_mapping_entry_sync() __dax_invalidate_entry() { xas_lock_irq(&xas); entry = get_unlocked_entry(&xas, 0); ... ... dax_disassociate_entry(entry, mapping, trunc); xas_store(&xas, NULL); ... ... put_unlocked_entry(&xas, entry); xas_unlock_irq(&xas); } Say a fault in in progress and it has locked entry at offset say "0x1c". Now say three instances of invalidate_inode_pages2() are in progress (A, B, C) and they all try to invalidate entry at offset "0x1c". Given dax entry is locked, all tree instances A, B, C will wait in wait queue. When dax fault finishes, say A is woken up. It will store NULL entry at index "0x1c" and wake up B. When B comes along it will find "entry=0" at page offset 0x1c and it will call put_unlocked_entry(&xas, 0). And this means put_unlocked_entry() will not wake up next waiter, given the current code. And that means C continues to wait and is not woken up. This patch fixes the issue by waking up all waiters when a dax entry has been invalidated. This seems to fix the deadlock I am facing and I can make forward progress. Reported-by: Sergio Lopez <slp@redhat.com> Fixes: ac401cc78242 ("dax: New fault locking") Reviewed-by: Jan Kara <jack@suse.cz> Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Link: https://lore.kernel.org/r/20210428190314.1865312-4-vgoyal@redhat.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-04-28 22:03:14 +03:00
put_unlocked_entry(&xas, entry, WAKE_ALL);
xas_unlock_irq(&xas);
return ret;
}
/*
* Delete DAX entry at @index from @mapping. Wait for it
* to be unlocked before deleting it.
*/
int dax_delete_mapping_entry(struct address_space *mapping, pgoff_t index)
{
int ret = __dax_invalidate_entry(mapping, index, true);
/*
* This gets called from truncate / punch_hole path. As such, the caller
* must hold locks protecting against concurrent modifications of the
* page cache (usually fs-private i_mmap_sem for writing). Since the
* caller has seen a DAX entry for this index, we better find it
* at that index as well...
*/
WARN_ON_ONCE(!ret);
return ret;
}
/*
* Invalidate DAX entry if it is clean.
*/
int dax_invalidate_mapping_entry_sync(struct address_space *mapping,
pgoff_t index)
{
return __dax_invalidate_entry(mapping, index, false);
}
static pgoff_t dax_iomap_pgoff(const struct iomap *iomap, loff_t pos)
{
return PHYS_PFN(iomap->addr + (pos & PAGE_MASK) - iomap->offset);
}
static int copy_cow_page_dax(struct vm_fault *vmf, const struct iomap_iter *iter)
{
pgoff_t pgoff = dax_iomap_pgoff(&iter->iomap, iter->pos);
void *vto, *kaddr;
long rc;
int id;
id = dax_read_lock();
rc = dax_direct_access(iter->iomap.dax_dev, pgoff, 1, DAX_ACCESS,
&kaddr, NULL);
if (rc < 0) {
dax_read_unlock(id);
return rc;
}
vto = kmap_atomic(vmf->cow_page);
copy_user_page(vto, kaddr, vmf->address, vmf->cow_page);
kunmap_atomic(vto);
dax_read_unlock(id);
return 0;
}
/*
* MAP_SYNC on a dax mapping guarantees dirty metadata is
* flushed on write-faults (non-cow), but not read-faults.
*/
static bool dax_fault_is_synchronous(const struct iomap_iter *iter,
struct vm_area_struct *vma)
{
return (iter->flags & IOMAP_WRITE) && (vma->vm_flags & VM_SYNC) &&
(iter->iomap.flags & IOMAP_F_DIRTY);
}
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
/*
* By this point grab_mapping_entry() has ensured that we have a locked entry
* of the appropriate size so we don't have to worry about downgrading PMDs to
* PTEs. If we happen to be trying to insert a PTE and there is a PMD
* already in the tree, we will skip the insertion and just dirty the PMD as
* appropriate.
*/
static void *dax_insert_entry(struct xa_state *xas, struct vm_fault *vmf,
const struct iomap_iter *iter, void *entry, pfn_t pfn,
unsigned long flags)
{
struct address_space *mapping = vmf->vma->vm_file->f_mapping;
void *new_entry = dax_make_entry(pfn, flags);
bool write = iter->flags & IOMAP_WRITE;
bool dirty = write && !dax_fault_is_synchronous(iter, vmf->vma);
bool shared = iter->iomap.flags & IOMAP_F_SHARED;
if (dirty)
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
if (shared || (dax_is_zero_entry(entry) && !(flags & DAX_ZERO_PAGE))) {
unsigned long index = xas->xa_index;
dax: use common 4k zero page for dax mmap reads When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. This is easily visible by looking at the overall memory consumption of the system or by looking at /proc/[pid]/smaps: 7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 1048576 kB Private_Dirty: 0 kB Referenced: 1048576 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. Here are the average latencies of dax_load_hole() as measured by ftrace on a random test box: Old method, using zeroed page cache pages: 3.4 us New method, using the common 4k zero page: 0.8 us This was the average latency over 1 GiB of sequential reads done by this simple fio script: [global] size=1G filename=/root/dax/data fallocate=none [io] rw=read ioengine=mmap 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. Solve these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. As with the PMD code we will now insert a DAX exceptional entry into the radix tree instead of a struct page pointer which allows us to remove all the special casing in the DAX code. Note that we do still pretty aggressively check for regular pages in the DAX radix tree, especially where we take action based on the bits set in the page. If we ever find a regular page in our radix tree now that most likely means that someone besides DAX is inserting pages (which has happened lots of times in the past), and we want to find that out early and fail loudly. This solution also removes the extra memory consumption. Here is that same /proc/[pid]/smaps after 1GiB of reading from a hole with the new code: 7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 0 kB Pss: 0 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 0 kB Referenced: 0 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB Overall system memory consumption is similarly improved. Another major change is that we remove dax_pfn_mkwrite() from our fault flow, and instead rely on the page fault itself to make the PTE dirty and writeable. The following description from the patch adding the vm_insert_mixed_mkwrite() call explains this a little more: "To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path" Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:18:43 +03:00
/* we are replacing a zero page with block mapping */
if (dax_is_pmd_entry(entry))
unmap_mapping_pages(mapping, index & ~PG_PMD_COLOUR,
PG_PMD_NR, false);
dax: use common 4k zero page for dax mmap reads When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. This is easily visible by looking at the overall memory consumption of the system or by looking at /proc/[pid]/smaps: 7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 1048576 kB Private_Dirty: 0 kB Referenced: 1048576 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. Here are the average latencies of dax_load_hole() as measured by ftrace on a random test box: Old method, using zeroed page cache pages: 3.4 us New method, using the common 4k zero page: 0.8 us This was the average latency over 1 GiB of sequential reads done by this simple fio script: [global] size=1G filename=/root/dax/data fallocate=none [io] rw=read ioengine=mmap 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. Solve these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. As with the PMD code we will now insert a DAX exceptional entry into the radix tree instead of a struct page pointer which allows us to remove all the special casing in the DAX code. Note that we do still pretty aggressively check for regular pages in the DAX radix tree, especially where we take action based on the bits set in the page. If we ever find a regular page in our radix tree now that most likely means that someone besides DAX is inserting pages (which has happened lots of times in the past), and we want to find that out early and fail loudly. This solution also removes the extra memory consumption. Here is that same /proc/[pid]/smaps after 1GiB of reading from a hole with the new code: 7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 0 kB Pss: 0 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 0 kB Referenced: 0 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB Overall system memory consumption is similarly improved. Another major change is that we remove dax_pfn_mkwrite() from our fault flow, and instead rely on the page fault itself to make the PTE dirty and writeable. The following description from the patch adding the vm_insert_mixed_mkwrite() call explains this a little more: "To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path" Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:18:43 +03:00
else /* pte entry */
unmap_mapping_pages(mapping, index, 1, false);
}
xas_reset(xas);
xas_lock_irq(xas);
if (shared || dax_is_zero_entry(entry) || dax_is_empty_entry(entry)) {
void *old;
dax_disassociate_entry(entry, mapping, false);
dax_associate_entry(new_entry, mapping, vmf->vma, vmf->address,
shared);
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
/*
* Only swap our new entry into the page cache if the current
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
* entry is a zero page or an empty entry. If a normal PTE or
* PMD entry is already in the cache, we leave it alone. This
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
* means that if we are trying to insert a PTE and the
* existing entry is a PMD, we will just leave the PMD in the
* tree and dirty it if necessary.
*/
old = dax_lock_entry(xas, new_entry);
WARN_ON_ONCE(old != xa_mk_value(xa_to_value(entry) |
DAX_LOCKED));
dax: use common 4k zero page for dax mmap reads When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. This is easily visible by looking at the overall memory consumption of the system or by looking at /proc/[pid]/smaps: 7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 1048576 kB Private_Dirty: 0 kB Referenced: 1048576 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. Here are the average latencies of dax_load_hole() as measured by ftrace on a random test box: Old method, using zeroed page cache pages: 3.4 us New method, using the common 4k zero page: 0.8 us This was the average latency over 1 GiB of sequential reads done by this simple fio script: [global] size=1G filename=/root/dax/data fallocate=none [io] rw=read ioengine=mmap 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. Solve these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. As with the PMD code we will now insert a DAX exceptional entry into the radix tree instead of a struct page pointer which allows us to remove all the special casing in the DAX code. Note that we do still pretty aggressively check for regular pages in the DAX radix tree, especially where we take action based on the bits set in the page. If we ever find a regular page in our radix tree now that most likely means that someone besides DAX is inserting pages (which has happened lots of times in the past), and we want to find that out early and fail loudly. This solution also removes the extra memory consumption. Here is that same /proc/[pid]/smaps after 1GiB of reading from a hole with the new code: 7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 0 kB Pss: 0 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 0 kB Referenced: 0 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB Overall system memory consumption is similarly improved. Another major change is that we remove dax_pfn_mkwrite() from our fault flow, and instead rely on the page fault itself to make the PTE dirty and writeable. The following description from the patch adding the vm_insert_mixed_mkwrite() call explains this a little more: "To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path" Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:18:43 +03:00
entry = new_entry;
} else {
xas_load(xas); /* Walk the xa_state */
}
dax: use common 4k zero page for dax mmap reads When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. This is easily visible by looking at the overall memory consumption of the system or by looking at /proc/[pid]/smaps: 7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 1048576 kB Private_Dirty: 0 kB Referenced: 1048576 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. Here are the average latencies of dax_load_hole() as measured by ftrace on a random test box: Old method, using zeroed page cache pages: 3.4 us New method, using the common 4k zero page: 0.8 us This was the average latency over 1 GiB of sequential reads done by this simple fio script: [global] size=1G filename=/root/dax/data fallocate=none [io] rw=read ioengine=mmap 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. Solve these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. As with the PMD code we will now insert a DAX exceptional entry into the radix tree instead of a struct page pointer which allows us to remove all the special casing in the DAX code. Note that we do still pretty aggressively check for regular pages in the DAX radix tree, especially where we take action based on the bits set in the page. If we ever find a regular page in our radix tree now that most likely means that someone besides DAX is inserting pages (which has happened lots of times in the past), and we want to find that out early and fail loudly. This solution also removes the extra memory consumption. Here is that same /proc/[pid]/smaps after 1GiB of reading from a hole with the new code: 7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 0 kB Pss: 0 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 0 kB Referenced: 0 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB Overall system memory consumption is similarly improved. Another major change is that we remove dax_pfn_mkwrite() from our fault flow, and instead rely on the page fault itself to make the PTE dirty and writeable. The following description from the patch adding the vm_insert_mixed_mkwrite() call explains this a little more: "To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path" Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:18:43 +03:00
if (dirty)
xas_set_mark(xas, PAGECACHE_TAG_DIRTY);
dax: use common 4k zero page for dax mmap reads When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. This is easily visible by looking at the overall memory consumption of the system or by looking at /proc/[pid]/smaps: 7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 1048576 kB Private_Dirty: 0 kB Referenced: 1048576 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. Here are the average latencies of dax_load_hole() as measured by ftrace on a random test box: Old method, using zeroed page cache pages: 3.4 us New method, using the common 4k zero page: 0.8 us This was the average latency over 1 GiB of sequential reads done by this simple fio script: [global] size=1G filename=/root/dax/data fallocate=none [io] rw=read ioengine=mmap 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. Solve these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. As with the PMD code we will now insert a DAX exceptional entry into the radix tree instead of a struct page pointer which allows us to remove all the special casing in the DAX code. Note that we do still pretty aggressively check for regular pages in the DAX radix tree, especially where we take action based on the bits set in the page. If we ever find a regular page in our radix tree now that most likely means that someone besides DAX is inserting pages (which has happened lots of times in the past), and we want to find that out early and fail loudly. This solution also removes the extra memory consumption. Here is that same /proc/[pid]/smaps after 1GiB of reading from a hole with the new code: 7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 0 kB Pss: 0 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 0 kB Referenced: 0 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB Overall system memory consumption is similarly improved. Another major change is that we remove dax_pfn_mkwrite() from our fault flow, and instead rely on the page fault itself to make the PTE dirty and writeable. The following description from the patch adding the vm_insert_mixed_mkwrite() call explains this a little more: "To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path" Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:18:43 +03:00
if (write && shared)
xas_set_mark(xas, PAGECACHE_TAG_TOWRITE);
xas_unlock_irq(xas);
dax: use common 4k zero page for dax mmap reads When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. This is easily visible by looking at the overall memory consumption of the system or by looking at /proc/[pid]/smaps: 7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 1048576 kB Private_Dirty: 0 kB Referenced: 1048576 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. Here are the average latencies of dax_load_hole() as measured by ftrace on a random test box: Old method, using zeroed page cache pages: 3.4 us New method, using the common 4k zero page: 0.8 us This was the average latency over 1 GiB of sequential reads done by this simple fio script: [global] size=1G filename=/root/dax/data fallocate=none [io] rw=read ioengine=mmap 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. Solve these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. As with the PMD code we will now insert a DAX exceptional entry into the radix tree instead of a struct page pointer which allows us to remove all the special casing in the DAX code. Note that we do still pretty aggressively check for regular pages in the DAX radix tree, especially where we take action based on the bits set in the page. If we ever find a regular page in our radix tree now that most likely means that someone besides DAX is inserting pages (which has happened lots of times in the past), and we want to find that out early and fail loudly. This solution also removes the extra memory consumption. Here is that same /proc/[pid]/smaps after 1GiB of reading from a hole with the new code: 7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 0 kB Pss: 0 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 0 kB Referenced: 0 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB Overall system memory consumption is similarly improved. Another major change is that we remove dax_pfn_mkwrite() from our fault flow, and instead rely on the page fault itself to make the PTE dirty and writeable. The following description from the patch adding the vm_insert_mixed_mkwrite() call explains this a little more: "To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path" Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:18:43 +03:00
return entry;
}
static int dax_writeback_one(struct xa_state *xas, struct dax_device *dax_dev,
struct address_space *mapping, void *entry)
{
dax: fix missing writeprotect the pte entry Currently dax_mapping_entry_mkclean() fails to clean and write protect the pte entry within a DAX PMD entry during an *sync operation. This can result in data loss in the following sequence: 1) process A mmap write to DAX PMD, dirtying PMD radix tree entry and making the pmd entry dirty and writeable. 2) process B mmap with the @offset (e.g. 4K) and @length (e.g. 4K) write to the same file, dirtying PMD radix tree entry (already done in 1)) and making the pte entry dirty and writeable. 3) fsync, flushing out PMD data and cleaning the radix tree entry. We currently fail to mark the pte entry as clean and write protected since the vma of process B is not covered in dax_entry_mkclean(). 4) process B writes to the pte. These don't cause any page faults since the pte entry is dirty and writeable. The radix tree entry remains clean. 5) fsync, which fails to flush the dirty PMD data because the radix tree entry was clean. 6) crash - dirty data that should have been fsync'd as part of 5) could still have been in the processor cache, and is lost. Just to use pfn_mkclean_range() to clean the pfns to fix this issue. Link: https://lkml.kernel.org/r/20220403053957.10770-6-songmuchun@bytedance.com Fixes: 4b4bb46d00b3 ("dax: clear dirty entry tags on cache flush") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 09:16:10 +03:00
unsigned long pfn, index, count, end;
long ret = 0;
dax: fix missing writeprotect the pte entry Currently dax_mapping_entry_mkclean() fails to clean and write protect the pte entry within a DAX PMD entry during an *sync operation. This can result in data loss in the following sequence: 1) process A mmap write to DAX PMD, dirtying PMD radix tree entry and making the pmd entry dirty and writeable. 2) process B mmap with the @offset (e.g. 4K) and @length (e.g. 4K) write to the same file, dirtying PMD radix tree entry (already done in 1)) and making the pte entry dirty and writeable. 3) fsync, flushing out PMD data and cleaning the radix tree entry. We currently fail to mark the pte entry as clean and write protected since the vma of process B is not covered in dax_entry_mkclean(). 4) process B writes to the pte. These don't cause any page faults since the pte entry is dirty and writeable. The radix tree entry remains clean. 5) fsync, which fails to flush the dirty PMD data because the radix tree entry was clean. 6) crash - dirty data that should have been fsync'd as part of 5) could still have been in the processor cache, and is lost. Just to use pfn_mkclean_range() to clean the pfns to fix this issue. Link: https://lkml.kernel.org/r/20220403053957.10770-6-songmuchun@bytedance.com Fixes: 4b4bb46d00b3 ("dax: clear dirty entry tags on cache flush") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 09:16:10 +03:00
struct vm_area_struct *vma;
/*
* A page got tagged dirty in DAX mapping? Something is seriously
* wrong.
*/
if (WARN_ON(!xa_is_value(entry)))
return -EIO;
if (unlikely(dax_is_locked(entry))) {
void *old_entry = entry;
entry = get_unlocked_entry(xas, 0);
/* Entry got punched out / reallocated? */
if (!entry || WARN_ON_ONCE(!xa_is_value(entry)))
goto put_unlocked;
/*
* Entry got reallocated elsewhere? No need to writeback.
* We have to compare pfns as we must not bail out due to
* difference in lockbit or entry type.
*/
if (dax_to_pfn(old_entry) != dax_to_pfn(entry))
goto put_unlocked;
if (WARN_ON_ONCE(dax_is_empty_entry(entry) ||
dax_is_zero_entry(entry))) {
ret = -EIO;
goto put_unlocked;
}
/* Another fsync thread may have already done this entry */
if (!xas_get_mark(xas, PAGECACHE_TAG_TOWRITE))
goto put_unlocked;
}
/* Lock the entry to serialize with page faults */
dax_lock_entry(xas, entry);
/*
* We can clear the tag now but we have to be careful so that concurrent
* dax_writeback_one() calls for the same index cannot finish before we
* actually flush the caches. This is achieved as the calls will look
* at the entry only under the i_pages lock and once they do that
* they will see the entry locked and wait for it to unlock.
*/
xas_clear_mark(xas, PAGECACHE_TAG_TOWRITE);
xas_unlock_irq(xas);
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
/*
* If dax_writeback_mapping_range() was given a wbc->range_start
* in the middle of a PMD, the 'index' we use needs to be
* aligned to the start of the PMD.
* This allows us to flush for PMD_SIZE and not have to worry about
* partial PMD writebacks.
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
*/
pfn = dax_to_pfn(entry);
count = 1UL << dax_entry_order(entry);
index = xas->xa_index & ~(count - 1);
dax: fix missing writeprotect the pte entry Currently dax_mapping_entry_mkclean() fails to clean and write protect the pte entry within a DAX PMD entry during an *sync operation. This can result in data loss in the following sequence: 1) process A mmap write to DAX PMD, dirtying PMD radix tree entry and making the pmd entry dirty and writeable. 2) process B mmap with the @offset (e.g. 4K) and @length (e.g. 4K) write to the same file, dirtying PMD radix tree entry (already done in 1)) and making the pte entry dirty and writeable. 3) fsync, flushing out PMD data and cleaning the radix tree entry. We currently fail to mark the pte entry as clean and write protected since the vma of process B is not covered in dax_entry_mkclean(). 4) process B writes to the pte. These don't cause any page faults since the pte entry is dirty and writeable. The radix tree entry remains clean. 5) fsync, which fails to flush the dirty PMD data because the radix tree entry was clean. 6) crash - dirty data that should have been fsync'd as part of 5) could still have been in the processor cache, and is lost. Just to use pfn_mkclean_range() to clean the pfns to fix this issue. Link: https://lkml.kernel.org/r/20220403053957.10770-6-songmuchun@bytedance.com Fixes: 4b4bb46d00b3 ("dax: clear dirty entry tags on cache flush") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 09:16:10 +03:00
end = index + count - 1;
/* Walk all mappings of a given index of a file and writeprotect them */
i_mmap_lock_read(mapping);
vma_interval_tree_foreach(vma, &mapping->i_mmap, index, end) {
pfn_mkclean_range(pfn, count, index, vma);
cond_resched();
}
i_mmap_unlock_read(mapping);
dax_flush(dax_dev, page_address(pfn_to_page(pfn)), count * PAGE_SIZE);
/*
* After we have flushed the cache, we can clear the dirty tag. There
* cannot be new dirty data in the pfn after the flush has completed as
* the pfn mappings are writeprotected and fault waits for mapping
* entry lock.
*/
xas_reset(xas);
xas_lock_irq(xas);
xas_store(xas, entry);
xas_clear_mark(xas, PAGECACHE_TAG_DIRTY);
dax_wake_entry(xas, entry, WAKE_NEXT);
trace_dax_writeback_one(mapping->host, index, count);
return ret;
put_unlocked:
put_unlocked_entry(xas, entry, WAKE_NEXT);
return ret;
}
/*
* Flush the mapping to the persistent domain within the byte range of [start,
* end]. This is required by data integrity operations to ensure file data is
* on persistent storage prior to completion of the operation.
*/
int dax_writeback_mapping_range(struct address_space *mapping,
struct dax_device *dax_dev, struct writeback_control *wbc)
{
XA_STATE(xas, &mapping->i_pages, wbc->range_start >> PAGE_SHIFT);
struct inode *inode = mapping->host;
pgoff_t end_index = wbc->range_end >> PAGE_SHIFT;
void *entry;
int ret = 0;
unsigned int scanned = 0;
if (WARN_ON_ONCE(inode->i_blkbits != PAGE_SHIFT))
return -EIO;
if (mapping_empty(mapping) || wbc->sync_mode != WB_SYNC_ALL)
return 0;
trace_dax_writeback_range(inode, xas.xa_index, end_index);
tag_pages_for_writeback(mapping, xas.xa_index, end_index);
xas_lock_irq(&xas);
xas_for_each_marked(&xas, entry, end_index, PAGECACHE_TAG_TOWRITE) {
ret = dax_writeback_one(&xas, dax_dev, mapping, entry);
if (ret < 0) {
mapping_set_error(mapping, ret);
break;
}
if (++scanned % XA_CHECK_SCHED)
continue;
xas_pause(&xas);
xas_unlock_irq(&xas);
cond_resched();
xas_lock_irq(&xas);
}
xas_unlock_irq(&xas);
trace_dax_writeback_range_done(inode, xas.xa_index, end_index);
return ret;
}
EXPORT_SYMBOL_GPL(dax_writeback_mapping_range);
static int dax_iomap_direct_access(const struct iomap *iomap, loff_t pos,
size_t size, void **kaddr, pfn_t *pfnp)
{
pgoff_t pgoff = dax_iomap_pgoff(iomap, pos);
int id, rc = 0;
long length;
id = dax_read_lock();
length = dax_direct_access(iomap->dax_dev, pgoff, PHYS_PFN(size),
DAX_ACCESS, kaddr, pfnp);
if (length < 0) {
rc = length;
goto out;
}
if (!pfnp)
goto out_check_addr;
rc = -EINVAL;
if (PFN_PHYS(length) < size)
goto out;
if (pfn_t_to_pfn(*pfnp) & (PHYS_PFN(size)-1))
goto out;
/* For larger pages we need devmap */
if (length > 1 && !pfn_t_devmap(*pfnp))
goto out;
rc = 0;
out_check_addr:
if (!kaddr)
goto out;
if (!*kaddr)
rc = -EFAULT;
out:
dax_read_unlock(id);
return rc;
}
/**
* dax_iomap_copy_around - Prepare for an unaligned write to a shared/cow page
* by copying the data before and after the range to be written.
* @pos: address to do copy from.
* @length: size of copy operation.
* @align_size: aligned w.r.t align_size (either PMD_SIZE or PAGE_SIZE)
* @srcmap: iomap srcmap
* @daddr: destination address to copy to.
*
* This can be called from two places. Either during DAX write fault (page
* aligned), to copy the length size data to daddr. Or, while doing normal DAX
* write operation, dax_iomap_iter() might call this to do the copy of either
* start or end unaligned address. In the latter case the rest of the copy of
* aligned ranges is taken care by dax_iomap_iter() itself.
* If the srcmap contains invalid data, such as HOLE and UNWRITTEN, zero the
* area to make sure no old data remains.
*/
static int dax_iomap_copy_around(loff_t pos, uint64_t length, size_t align_size,
const struct iomap *srcmap, void *daddr)
{
loff_t head_off = pos & (align_size - 1);
size_t size = ALIGN(head_off + length, align_size);
loff_t end = pos + length;
loff_t pg_end = round_up(end, align_size);
/* copy_all is usually in page fault case */
bool copy_all = head_off == 0 && end == pg_end;
/* zero the edges if srcmap is a HOLE or IOMAP_UNWRITTEN */
bool zero_edge = srcmap->flags & IOMAP_F_SHARED ||
srcmap->type == IOMAP_UNWRITTEN;
void *saddr = 0;
int ret = 0;
if (!zero_edge) {
ret = dax_iomap_direct_access(srcmap, pos, size, &saddr, NULL);
if (ret)
return ret;
}
if (copy_all) {
if (zero_edge)
memset(daddr, 0, size);
else
ret = copy_mc_to_kernel(daddr, saddr, length);
goto out;
}
/* Copy the head part of the range */
if (head_off) {
if (zero_edge)
memset(daddr, 0, head_off);
else {
ret = copy_mc_to_kernel(daddr, saddr, head_off);
if (ret)
return -EIO;
}
}
/* Copy the tail part of the range */
if (end < pg_end) {
loff_t tail_off = head_off + length;
loff_t tail_len = pg_end - end;
if (zero_edge)
memset(daddr + tail_off, 0, tail_len);
else {
ret = copy_mc_to_kernel(daddr + tail_off,
saddr + tail_off, tail_len);
if (ret)
return -EIO;
}
}
out:
if (zero_edge)
dax_flush(srcmap->dax_dev, daddr, size);
return ret ? -EIO : 0;
}
/*
dax: use common 4k zero page for dax mmap reads When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. This is easily visible by looking at the overall memory consumption of the system or by looking at /proc/[pid]/smaps: 7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 1048576 kB Private_Dirty: 0 kB Referenced: 1048576 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. Here are the average latencies of dax_load_hole() as measured by ftrace on a random test box: Old method, using zeroed page cache pages: 3.4 us New method, using the common 4k zero page: 0.8 us This was the average latency over 1 GiB of sequential reads done by this simple fio script: [global] size=1G filename=/root/dax/data fallocate=none [io] rw=read ioengine=mmap 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. Solve these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. As with the PMD code we will now insert a DAX exceptional entry into the radix tree instead of a struct page pointer which allows us to remove all the special casing in the DAX code. Note that we do still pretty aggressively check for regular pages in the DAX radix tree, especially where we take action based on the bits set in the page. If we ever find a regular page in our radix tree now that most likely means that someone besides DAX is inserting pages (which has happened lots of times in the past), and we want to find that out early and fail loudly. This solution also removes the extra memory consumption. Here is that same /proc/[pid]/smaps after 1GiB of reading from a hole with the new code: 7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 0 kB Pss: 0 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 0 kB Referenced: 0 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB Overall system memory consumption is similarly improved. Another major change is that we remove dax_pfn_mkwrite() from our fault flow, and instead rely on the page fault itself to make the PTE dirty and writeable. The following description from the patch adding the vm_insert_mixed_mkwrite() call explains this a little more: "To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path" Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:18:43 +03:00
* The user has performed a load from a hole in the file. Allocating a new
* page in the file would cause excessive storage usage for workloads with
* sparse files. Instead we insert a read-only mapping of the 4k zero page.
* If this page is ever written to we will re-fault and change the mapping to
* point to real DAX storage instead.
*/
static vm_fault_t dax_load_hole(struct xa_state *xas, struct vm_fault *vmf,
const struct iomap_iter *iter, void **entry)
{
struct inode *inode = iter->inode;
dax: use common 4k zero page for dax mmap reads When servicing mmap() reads from file holes the current DAX code allocates a page cache page of all zeroes and places the struct page pointer in the mapping->page_tree radix tree. This has three major drawbacks: 1) It consumes memory unnecessarily. For every 4k page that is read via a DAX mmap() over a hole, we allocate a new page cache page. This means that if you read 1GiB worth of pages, you end up using 1GiB of zeroed memory. This is easily visible by looking at the overall memory consumption of the system or by looking at /proc/[pid]/smaps: 7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 1048576 kB Private_Dirty: 0 kB Referenced: 1048576 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB 2) It is slower than using a common zero page because each page fault has more work to do. Instead of just inserting a common zero page we have to allocate a page cache page, zero it, and then insert it. Here are the average latencies of dax_load_hole() as measured by ftrace on a random test box: Old method, using zeroed page cache pages: 3.4 us New method, using the common 4k zero page: 0.8 us This was the average latency over 1 GiB of sequential reads done by this simple fio script: [global] size=1G filename=/root/dax/data fallocate=none [io] rw=read ioengine=mmap 3) The fact that we had to check for both DAX exceptional entries and for page cache pages in the radix tree made the DAX code more complex. Solve these issues by following the lead of the DAX PMD code and using a common 4k zero page instead. As with the PMD code we will now insert a DAX exceptional entry into the radix tree instead of a struct page pointer which allows us to remove all the special casing in the DAX code. Note that we do still pretty aggressively check for regular pages in the DAX radix tree, especially where we take action based on the bits set in the page. If we ever find a regular page in our radix tree now that most likely means that someone besides DAX is inserting pages (which has happened lots of times in the past), and we want to find that out early and fail loudly. This solution also removes the extra memory consumption. Here is that same /proc/[pid]/smaps after 1GiB of reading from a hole with the new code: 7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12 /root/dax/data Size: 1048576 kB Rss: 0 kB Pss: 0 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 0 kB Referenced: 0 kB Anonymous: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB Overall system memory consumption is similarly improved. Another major change is that we remove dax_pfn_mkwrite() from our fault flow, and instead rely on the page fault itself to make the PTE dirty and writeable. The following description from the patch adding the vm_insert_mixed_mkwrite() call explains this a little more: "To be able to use the common 4k zero page in DAX we need to have our PTE fault path look more like our PMD fault path where a PTE entry can be marked as dirty and writeable as it is first inserted rather than waiting for a follow-up dax_pfn_mkwrite() => finish_mkwrite_fault() call. Right now we can rely on having a dax_pfn_mkwrite() call because we can distinguish between these two cases in do_wp_page(): case 1: 4k zero page => writable DAX storage case 2: read-only DAX storage => writeable DAX storage This distinction is made by via vm_normal_page(). vm_normal_page() returns false for the common 4k zero page, though, just as it does for DAX ptes. Instead of special casing the DAX + 4k zero page case we will simplify our DAX PTE page fault sequence so that it matches our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper. We will instead use dax_iomap_fault() to handle write-protection faults. This means that insert_pfn() needs to follow the lead of insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If 'mkwrite' is set insert_pfn() will do the work that was previously done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path" Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:18:43 +03:00
unsigned long vaddr = vmf->address;
pfn_t pfn = pfn_to_pfn_t(my_zero_pfn(vaddr));
vm_fault_t ret;
*entry = dax_insert_entry(xas, vmf, iter, *entry, pfn, DAX_ZERO_PAGE);
ret = vmf_insert_mixed(vmf->vma, vaddr, pfn);
trace_dax_load_hole(inode, vmf, ret);
return ret;
}
#ifdef CONFIG_FS_DAX_PMD
static vm_fault_t dax_pmd_load_hole(struct xa_state *xas, struct vm_fault *vmf,
const struct iomap_iter *iter, void **entry)
{
struct address_space *mapping = vmf->vma->vm_file->f_mapping;
unsigned long pmd_addr = vmf->address & PMD_MASK;
struct vm_area_struct *vma = vmf->vma;
struct inode *inode = mapping->host;
pgtable_t pgtable = NULL;
struct page *zero_page;
spinlock_t *ptl;
pmd_t pmd_entry;
pfn_t pfn;
zero_page = mm_get_huge_zero_page(vmf->vma->vm_mm);
if (unlikely(!zero_page))
goto fallback;
pfn = page_to_pfn_t(zero_page);
*entry = dax_insert_entry(xas, vmf, iter, *entry, pfn,
DAX_PMD | DAX_ZERO_PAGE);
if (arch_needs_pgtable_deposit()) {
pgtable = pte_alloc_one(vma->vm_mm);
if (!pgtable)
return VM_FAULT_OOM;
}
ptl = pmd_lock(vmf->vma->vm_mm, vmf->pmd);
if (!pmd_none(*(vmf->pmd))) {
spin_unlock(ptl);
goto fallback;
}
if (pgtable) {
pgtable_trans_huge_deposit(vma->vm_mm, vmf->pmd, pgtable);
mm_inc_nr_ptes(vma->vm_mm);
}
pmd_entry = mk_pmd(zero_page, vmf->vma->vm_page_prot);
pmd_entry = pmd_mkhuge(pmd_entry);
set_pmd_at(vmf->vma->vm_mm, pmd_addr, vmf->pmd, pmd_entry);
spin_unlock(ptl);
trace_dax_pmd_load_hole(inode, vmf, zero_page, *entry);
return VM_FAULT_NOPAGE;
fallback:
if (pgtable)
pte_free(vma->vm_mm, pgtable);
trace_dax_pmd_load_hole_fallback(inode, vmf, zero_page, *entry);
return VM_FAULT_FALLBACK;
}
#else
static vm_fault_t dax_pmd_load_hole(struct xa_state *xas, struct vm_fault *vmf,
const struct iomap_iter *iter, void **entry)
{
return VM_FAULT_FALLBACK;
}
#endif /* CONFIG_FS_DAX_PMD */
static s64 dax_unshare_iter(struct iomap_iter *iter)
{
struct iomap *iomap = &iter->iomap;
const struct iomap *srcmap = iomap_iter_srcmap(iter);
loff_t pos = iter->pos;
loff_t length = iomap_length(iter);
int id = 0;
s64 ret = 0;
void *daddr = NULL, *saddr = NULL;
/* don't bother with blocks that are not shared to start with */
if (!(iomap->flags & IOMAP_F_SHARED))
return length;
/* don't bother with holes or unwritten extents */
if (srcmap->type == IOMAP_HOLE || srcmap->type == IOMAP_UNWRITTEN)
return length;
id = dax_read_lock();
ret = dax_iomap_direct_access(iomap, pos, length, &daddr, NULL);
if (ret < 0)
goto out_unlock;
ret = dax_iomap_direct_access(srcmap, pos, length, &saddr, NULL);
if (ret < 0)
goto out_unlock;
if (copy_mc_to_kernel(daddr, saddr, length) == 0)
ret = length;
else
ret = -EIO;
out_unlock:
dax_read_unlock(id);
return ret;
}
int dax_file_unshare(struct inode *inode, loff_t pos, loff_t len,
const struct iomap_ops *ops)
{
struct iomap_iter iter = {
.inode = inode,
.pos = pos,
.len = len,
.flags = IOMAP_WRITE | IOMAP_UNSHARE | IOMAP_DAX,
};
int ret;
while ((ret = iomap_iter(&iter, ops)) > 0)
iter.processed = dax_unshare_iter(&iter);
return ret;
}
EXPORT_SYMBOL_GPL(dax_file_unshare);
static int dax_memzero(struct iomap_iter *iter, loff_t pos, size_t size)
{
const struct iomap *iomap = &iter->iomap;
const struct iomap *srcmap = iomap_iter_srcmap(iter);
unsigned offset = offset_in_page(pos);
pgoff_t pgoff = dax_iomap_pgoff(iomap, pos);
void *kaddr;
long ret;
ret = dax_direct_access(iomap->dax_dev, pgoff, 1, DAX_ACCESS, &kaddr,
NULL);
if (ret < 0)
return ret;
memset(kaddr + offset, 0, size);
if (iomap->flags & IOMAP_F_SHARED)
ret = dax_iomap_copy_around(pos, size, PAGE_SIZE, srcmap,
kaddr);
else
dax_flush(iomap->dax_dev, kaddr + offset, size);
return ret;
}
static s64 dax_zero_iter(struct iomap_iter *iter, bool *did_zero)
{
const struct iomap *iomap = &iter->iomap;
const struct iomap *srcmap = iomap_iter_srcmap(iter);
loff_t pos = iter->pos;
u64 length = iomap_length(iter);
s64 written = 0;
/* already zeroed? we're done. */
if (srcmap->type == IOMAP_HOLE || srcmap->type == IOMAP_UNWRITTEN)
return length;
/*
* invalidate the pages whose sharing state is to be changed
* because of CoW.
*/
if (iomap->flags & IOMAP_F_SHARED)
invalidate_inode_pages2_range(iter->inode->i_mapping,
pos >> PAGE_SHIFT,
(pos + length - 1) >> PAGE_SHIFT);
do {
unsigned offset = offset_in_page(pos);
unsigned size = min_t(u64, PAGE_SIZE - offset, length);
pgoff_t pgoff = dax_iomap_pgoff(iomap, pos);
long rc;
int id;
id = dax_read_lock();
if (IS_ALIGNED(pos, PAGE_SIZE) && size == PAGE_SIZE)
rc = dax_zero_page_range(iomap->dax_dev, pgoff, 1);
else
rc = dax_memzero(iter, pos, size);
dax_read_unlock(id);
if (rc < 0)
return rc;
pos += size;
length -= size;
written += size;
} while (length > 0);
if (did_zero)
*did_zero = true;
return written;
}
int dax_zero_range(struct inode *inode, loff_t pos, loff_t len, bool *did_zero,
const struct iomap_ops *ops)
{
struct iomap_iter iter = {
.inode = inode,
.pos = pos,
.len = len,
.flags = IOMAP_DAX | IOMAP_ZERO,
};
int ret;
while ((ret = iomap_iter(&iter, ops)) > 0)
iter.processed = dax_zero_iter(&iter, did_zero);
return ret;
}
EXPORT_SYMBOL_GPL(dax_zero_range);
int dax_truncate_page(struct inode *inode, loff_t pos, bool *did_zero,
const struct iomap_ops *ops)
{
unsigned int blocksize = i_blocksize(inode);
unsigned int off = pos & (blocksize - 1);
/* Block boundary? Nothing to do */
if (!off)
return 0;
return dax_zero_range(inode, pos, blocksize - off, did_zero, ops);
}
EXPORT_SYMBOL_GPL(dax_truncate_page);
static loff_t dax_iomap_iter(const struct iomap_iter *iomi,
struct iov_iter *iter)
{
const struct iomap *iomap = &iomi->iomap;
const struct iomap *srcmap = iomap_iter_srcmap(iomi);
loff_t length = iomap_length(iomi);
loff_t pos = iomi->pos;
struct dax_device *dax_dev = iomap->dax_dev;
loff_t end = pos + length, done = 0;
bool write = iov_iter_rw(iter) == WRITE;
bool cow = write && iomap->flags & IOMAP_F_SHARED;
ssize_t ret = 0;
size_t xfer;
int id;
if (!write) {
end = min(end, i_size_read(iomi->inode));
if (pos >= end)
return 0;
if (iomap->type == IOMAP_HOLE || iomap->type == IOMAP_UNWRITTEN)
return iov_iter_zero(min(length, end - pos), iter);
}
/*
* In DAX mode, enforce either pure overwrites of written extents, or
* writes to unwritten extents as part of a copy-on-write operation.
*/
if (WARN_ON_ONCE(iomap->type != IOMAP_MAPPED &&
!(iomap->flags & IOMAP_F_SHARED)))
return -EIO;
/*
* Write can allocate block for an area which has a hole page mapped
* into page tables. We have to tear down these mappings so that data
* written by write(2) is visible in mmap.
*/
if (iomap->flags & IOMAP_F_NEW || cow) {
invalidate_inode_pages2_range(iomi->inode->i_mapping,
pos >> PAGE_SHIFT,
(end - 1) >> PAGE_SHIFT);
}
id = dax_read_lock();
while (pos < end) {
unsigned offset = pos & (PAGE_SIZE - 1);
const size_t size = ALIGN(length + offset, PAGE_SIZE);
pgoff_t pgoff = dax_iomap_pgoff(iomap, pos);
ssize_t map_len;
bool recovery = false;
void *kaddr;
fs: break out of iomap_file_buffered_write on fatal signals Tetsuo has noticed that an OOM stress test which performs large write requests can cause the full memory reserves depletion. He has tracked this down to the following path __alloc_pages_nodemask+0x436/0x4d0 alloc_pages_current+0x97/0x1b0 __page_cache_alloc+0x15d/0x1a0 mm/filemap.c:728 pagecache_get_page+0x5a/0x2b0 mm/filemap.c:1331 grab_cache_page_write_begin+0x23/0x40 mm/filemap.c:2773 iomap_write_begin+0x50/0xd0 fs/iomap.c:118 iomap_write_actor+0xb5/0x1a0 fs/iomap.c:190 ? iomap_write_end+0x80/0x80 fs/iomap.c:150 iomap_apply+0xb3/0x130 fs/iomap.c:79 iomap_file_buffered_write+0x68/0xa0 fs/iomap.c:243 ? iomap_write_end+0x80/0x80 xfs_file_buffered_aio_write+0x132/0x390 [xfs] ? remove_wait_queue+0x59/0x60 xfs_file_write_iter+0x90/0x130 [xfs] __vfs_write+0xe5/0x140 vfs_write+0xc7/0x1f0 ? syscall_trace_enter+0x1d0/0x380 SyS_write+0x58/0xc0 do_syscall_64+0x6c/0x200 entry_SYSCALL64_slow_path+0x25/0x25 the oom victim has access to all memory reserves to make a forward progress to exit easier. But iomap_file_buffered_write and other callers of iomap_apply loop to complete the full request. We need to check for fatal signals and back off with a short write instead. As the iomap_apply delegates all the work down to the actor we have to hook into those. All callers that work with the page cache are calling iomap_write_begin so we will check for signals there. dax_iomap_actor has to handle the situation explicitly because it copies data to the userspace directly. Other callers like iomap_page_mkwrite work on a single page or iomap_fiemap_actor do not allocate memory based on the given len. Fixes: 68a9f5e7007c ("xfs: implement iomap based buffered write path") Link: http://lkml.kernel.org/r/20170201092706.9966-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-04 00:13:26 +03:00
if (fatal_signal_pending(current)) {
ret = -EINTR;
break;
}
map_len = dax_direct_access(dax_dev, pgoff, PHYS_PFN(size),
DAX_ACCESS, &kaddr, NULL);
if (map_len == -EIO && iov_iter_rw(iter) == WRITE) {
map_len = dax_direct_access(dax_dev, pgoff,
PHYS_PFN(size), DAX_RECOVERY_WRITE,
&kaddr, NULL);
if (map_len > 0)
recovery = true;
}
if (map_len < 0) {
ret = map_len;
break;
}
if (cow) {
ret = dax_iomap_copy_around(pos, length, PAGE_SIZE,
srcmap, kaddr);
if (ret)
break;
}
map_len = PFN_PHYS(map_len);
kaddr += offset;
map_len -= offset;
if (map_len > end - pos)
map_len = end - pos;
if (recovery)
xfer = dax_recovery_write(dax_dev, pgoff, kaddr,
map_len, iter);
else if (write)
xfer = dax_copy_from_iter(dax_dev, pgoff, kaddr,
map_len, iter);
else
xfer = dax_copy_to_iter(dax_dev, pgoff, kaddr,
map_len, iter);
pos += xfer;
length -= xfer;
done += xfer;
if (xfer == 0)
ret = -EFAULT;
if (xfer < map_len)
break;
}
dax_read_unlock(id);
return done ? done : ret;
}
/**
* dax_iomap_rw - Perform I/O to a DAX file
* @iocb: The control block for this I/O
* @iter: The addresses to do I/O from or to
* @ops: iomap ops passed from the file system
*
* This function performs read and write operations to directly mapped
* persistent memory. The callers needs to take care of read/write exclusion
* and evicting any page cache pages in the region under I/O.
*/
ssize_t
dax_iomap_rw(struct kiocb *iocb, struct iov_iter *iter,
const struct iomap_ops *ops)
{
struct iomap_iter iomi = {
.inode = iocb->ki_filp->f_mapping->host,
.pos = iocb->ki_pos,
.len = iov_iter_count(iter),
.flags = IOMAP_DAX,
};
loff_t done = 0;
int ret;
if (!iomi.len)
return 0;
if (iov_iter_rw(iter) == WRITE) {
lockdep_assert_held_write(&iomi.inode->i_rwsem);
iomi.flags |= IOMAP_WRITE;
} else {
lockdep_assert_held(&iomi.inode->i_rwsem);
}
if (iocb->ki_flags & IOCB_NOWAIT)
iomi.flags |= IOMAP_NOWAIT;
while ((ret = iomap_iter(&iomi, ops)) > 0)
iomi.processed = dax_iomap_iter(&iomi, iter);
done = iomi.pos - iocb->ki_pos;
iocb->ki_pos = iomi.pos;
return done ? done : ret;
}
EXPORT_SYMBOL_GPL(dax_iomap_rw);
static vm_fault_t dax_fault_return(int error)
{
if (error == 0)
return VM_FAULT_NOPAGE;
return vmf_error(error);
}
/*
* When handling a synchronous page fault and the inode need a fsync, we can
* insert the PTE/PMD into page tables only after that fsync happened. Skip
* insertion for now and return the pfn so that caller can insert it after the
* fsync is done.
*/
static vm_fault_t dax_fault_synchronous_pfnp(pfn_t *pfnp, pfn_t pfn)
{
if (WARN_ON_ONCE(!pfnp))
return VM_FAULT_SIGBUS;
*pfnp = pfn;
return VM_FAULT_NEEDDSYNC;
}
static vm_fault_t dax_fault_cow_page(struct vm_fault *vmf,
const struct iomap_iter *iter)
{
vm_fault_t ret;
int error = 0;
switch (iter->iomap.type) {
case IOMAP_HOLE:
case IOMAP_UNWRITTEN:
clear_user_highpage(vmf->cow_page, vmf->address);
break;
case IOMAP_MAPPED:
error = copy_cow_page_dax(vmf, iter);
break;
default:
WARN_ON_ONCE(1);
error = -EIO;
break;
}
if (error)
return dax_fault_return(error);
__SetPageUptodate(vmf->cow_page);
ret = finish_fault(vmf);
if (!ret)
return VM_FAULT_DONE_COW;
return ret;
}
/**
* dax_fault_iter - Common actor to handle pfn insertion in PTE/PMD fault.
* @vmf: vm fault instance
* @iter: iomap iter
* @pfnp: pfn to be returned
* @xas: the dax mapping tree of a file
* @entry: an unlocked dax entry to be inserted
* @pmd: distinguish whether it is a pmd fault
*/
static vm_fault_t dax_fault_iter(struct vm_fault *vmf,
const struct iomap_iter *iter, pfn_t *pfnp,
struct xa_state *xas, void **entry, bool pmd)
{
const struct iomap *iomap = &iter->iomap;
const struct iomap *srcmap = iomap_iter_srcmap(iter);
size_t size = pmd ? PMD_SIZE : PAGE_SIZE;
loff_t pos = (loff_t)xas->xa_index << PAGE_SHIFT;
bool write = iter->flags & IOMAP_WRITE;
unsigned long entry_flags = pmd ? DAX_PMD : 0;
int err = 0;
pfn_t pfn;
void *kaddr;
if (!pmd && vmf->cow_page)
return dax_fault_cow_page(vmf, iter);
/* if we are reading UNWRITTEN and HOLE, return a hole. */
if (!write &&
(iomap->type == IOMAP_UNWRITTEN || iomap->type == IOMAP_HOLE)) {
if (!pmd)
return dax_load_hole(xas, vmf, iter, entry);
return dax_pmd_load_hole(xas, vmf, iter, entry);
}
if (iomap->type != IOMAP_MAPPED && !(iomap->flags & IOMAP_F_SHARED)) {
WARN_ON_ONCE(1);
return pmd ? VM_FAULT_FALLBACK : VM_FAULT_SIGBUS;
}
err = dax_iomap_direct_access(iomap, pos, size, &kaddr, &pfn);
if (err)
return pmd ? VM_FAULT_FALLBACK : dax_fault_return(err);
*entry = dax_insert_entry(xas, vmf, iter, *entry, pfn, entry_flags);
if (write && iomap->flags & IOMAP_F_SHARED) {
err = dax_iomap_copy_around(pos, size, size, srcmap, kaddr);
if (err)
return dax_fault_return(err);
}
if (dax_fault_is_synchronous(iter, vmf->vma))
return dax_fault_synchronous_pfnp(pfnp, pfn);
/* insert PMD pfn */
if (pmd)
return vmf_insert_pfn_pmd(vmf, pfn, write);
/* insert PTE pfn */
if (write)
return vmf_insert_mixed_mkwrite(vmf->vma, vmf->address, pfn);
return vmf_insert_mixed(vmf->vma, vmf->address, pfn);
}
static vm_fault_t dax_iomap_pte_fault(struct vm_fault *vmf, pfn_t *pfnp,
int *iomap_errp, const struct iomap_ops *ops)
{
struct address_space *mapping = vmf->vma->vm_file->f_mapping;
XA_STATE(xas, &mapping->i_pages, vmf->pgoff);
struct iomap_iter iter = {
.inode = mapping->host,
.pos = (loff_t)vmf->pgoff << PAGE_SHIFT,
.len = PAGE_SIZE,
.flags = IOMAP_DAX | IOMAP_FAULT,
};
vm_fault_t ret = 0;
void *entry;
int error;
trace_dax_pte_fault(iter.inode, vmf, ret);
/*
* Check whether offset isn't beyond end of file now. Caller is supposed
* to hold locks serializing us with truncate / punch hole so this is
* a reliable test.
*/
if (iter.pos >= i_size_read(iter.inode)) {
ret = VM_FAULT_SIGBUS;
dax: add tracepoints to dax_iomap_pte_fault() Patch series "second round of tracepoints for DAX". This second round of DAX tracepoint patches adds tracing to the PTE fault path (dax_iomap_pte_fault(), dax_pfn_mkwrite(), dax_load_hole(), dax_insert_mapping()) and to the writeback path (dax_writeback_mapping_range(), dax_writeback_one()). The purpose of this tracing is to give us a high level view of what DAX is doing, whether faults are being serviced by PMDs or PTEs, and by real storage or by zero pages covering holes. I do have some patches nearly ready which also add tracing to grab_mapping_entry() and dax_insert_mapping_entry(). These are more targeted at logging how we are interacting with the radix tree, how we use empty entries for locking, whether we "downgrade" huge zero pages to 4k PTE sized allocations, etc. In the end it seemed to me that this might be too detailed to have as constantly present tracepoints, but if anyone sees value in having tracepoints like this in the DAX code permanently (Jan?), please let me know and I'll add those last two patches. All these tracepoints were done to be consistent with the style of the XFS tracepoints and with the existing DAX PMD tracepoints. This patch (of 6): Add tracepoints to dax_iomap_pte_fault(), following the same logging conventions as the rest of DAX. Here is an example fault that initially tries to be serviced by the PMD fault handler but which falls back to PTEs because the VMA isn't large enough to hold a PMD: small-1086 [005] .... 71.140014: xfs_filemap_huge_fault: dev 259:0 ino 0x1003 small-1086 [005] .... 71.140027: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 vm_start 0x10200000 vm_end 0x10500000 pgoff 0x220 max_pgoff 0x1400 small-1086 [005] .... 71.140028: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 vm_start 0x10200000 vm_end 0x10500000 pgoff 0x220 max_pgoff 0x1400 FALLBACK small-1086 [005] .... 71.140035: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 small-1086 [005] .... 71.140396: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 MAJOR|NOPAGE Link: http://lkml.kernel.org/r/20170221195116.13278-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09 02:00:00 +03:00
goto out;
}
if ((vmf->flags & FAULT_FLAG_WRITE) && !vmf->cow_page)
iter.flags |= IOMAP_WRITE;
entry = grab_mapping_entry(&xas, mapping, 0);
if (xa_is_internal(entry)) {
ret = xa_to_internal(entry);
goto out;
}
dax: fix race between colliding PMD & PTE entries We currently have two related PMD vs PTE races in the DAX code. These can both be easily triggered by having two threads reading and writing simultaneously to the same private mapping, with the key being that private mapping reads can be handled with PMDs but private mapping writes are always handled with PTEs so that we can COW. Here is the first race: CPU 0 CPU 1 (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK handle_pte_fault() passes check for pmd_devmap() (private mapping read) __handle_mm_fault() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD dax_iomap_pte_fault() does a PTE fault, but we already have a DAX PMD installed in our page tables at this spot. Here's the second race: CPU 0 CPU 1 (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() handle_pte_fault() dax_iomap_pte_fault() inserts PTE dax_iomap_pmd_fault() inserts PMD, but we already have a PTE at this spot. The core of the issue is that while there is isolation between faults to the same range in the DAX fault handlers via our DAX entry locking, there is no isolation between faults in the code in mm/memory.c. This means for instance that this code in __handle_mm_fault() can run: if (pmd_none(*vmf.pmd) && transparent_hugepage_enabled(vma)) { ret = create_huge_pmd(&vmf); But by the time we actually get to run the fault handler called by create_huge_pmd(), the PMD is no longer pmd_none() because a racing PTE fault has installed a normal PMD here as a parent. This is the cause of the 2nd race. The first race is similar - there is the following check in handle_pte_fault(): } else { /* See comment in pte_alloc_one_map() */ if (pmd_devmap(*vmf->pmd) || pmd_trans_unstable(vmf->pmd)) return 0; So if a pmd_devmap() PMD (a DAX PMD) has been installed at vmf->pmd, we will bail and retry the fault. This is correct, but there is nothing preventing the PMD from being installed after this check but before we actually get to the DAX PTE fault handlers. In my testing these races result in the following types of errors: BUG: Bad rss-counter state mm:ffff8800a817d280 idx:1 val:1 BUG: non-zero nr_ptes on freeing mm: 15 Fix this issue by having the DAX fault handlers verify that it is safe to continue their fault after they have taken an entry lock to block other racing faults. [ross.zwisler@linux.intel.com: improve fix for colliding PMD & PTE entries] Link: http://lkml.kernel.org/r/20170526195932.32178-1-ross.zwisler@linux.intel.com Link: http://lkml.kernel.org/r/20170522215749.23516-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Pawel Lebioda <pawel.lebioda@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Pawel Lebioda <pawel.lebioda@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Xiong Zhou <xzhou@redhat.com> Cc: Eryu Guan <eguan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-03 00:46:37 +03:00
/*
* It is possible, particularly with mixed reads & writes to private
* mappings, that we have raced with a PMD fault that overlaps with
* the PTE we need to set up. If so just return and the fault will be
* retried.
*/
if (pmd_trans_huge(*vmf->pmd) || pmd_devmap(*vmf->pmd)) {
ret = VM_FAULT_NOPAGE;
dax: fix race between colliding PMD & PTE entries We currently have two related PMD vs PTE races in the DAX code. These can both be easily triggered by having two threads reading and writing simultaneously to the same private mapping, with the key being that private mapping reads can be handled with PMDs but private mapping writes are always handled with PTEs so that we can COW. Here is the first race: CPU 0 CPU 1 (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK handle_pte_fault() passes check for pmd_devmap() (private mapping read) __handle_mm_fault() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD dax_iomap_pte_fault() does a PTE fault, but we already have a DAX PMD installed in our page tables at this spot. Here's the second race: CPU 0 CPU 1 (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() handle_pte_fault() dax_iomap_pte_fault() inserts PTE dax_iomap_pmd_fault() inserts PMD, but we already have a PTE at this spot. The core of the issue is that while there is isolation between faults to the same range in the DAX fault handlers via our DAX entry locking, there is no isolation between faults in the code in mm/memory.c. This means for instance that this code in __handle_mm_fault() can run: if (pmd_none(*vmf.pmd) && transparent_hugepage_enabled(vma)) { ret = create_huge_pmd(&vmf); But by the time we actually get to run the fault handler called by create_huge_pmd(), the PMD is no longer pmd_none() because a racing PTE fault has installed a normal PMD here as a parent. This is the cause of the 2nd race. The first race is similar - there is the following check in handle_pte_fault(): } else { /* See comment in pte_alloc_one_map() */ if (pmd_devmap(*vmf->pmd) || pmd_trans_unstable(vmf->pmd)) return 0; So if a pmd_devmap() PMD (a DAX PMD) has been installed at vmf->pmd, we will bail and retry the fault. This is correct, but there is nothing preventing the PMD from being installed after this check but before we actually get to the DAX PTE fault handlers. In my testing these races result in the following types of errors: BUG: Bad rss-counter state mm:ffff8800a817d280 idx:1 val:1 BUG: non-zero nr_ptes on freeing mm: 15 Fix this issue by having the DAX fault handlers verify that it is safe to continue their fault after they have taken an entry lock to block other racing faults. [ross.zwisler@linux.intel.com: improve fix for colliding PMD & PTE entries] Link: http://lkml.kernel.org/r/20170526195932.32178-1-ross.zwisler@linux.intel.com Link: http://lkml.kernel.org/r/20170522215749.23516-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Pawel Lebioda <pawel.lebioda@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Pawel Lebioda <pawel.lebioda@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Xiong Zhou <xzhou@redhat.com> Cc: Eryu Guan <eguan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-03 00:46:37 +03:00
goto unlock_entry;
}
while ((error = iomap_iter(&iter, ops)) > 0) {
if (WARN_ON_ONCE(iomap_length(&iter) < PAGE_SIZE)) {
iter.processed = -EIO; /* fs corruption? */
continue;
}
ret = dax_fault_iter(vmf, &iter, pfnp, &xas, &entry, false);
if (ret != VM_FAULT_SIGBUS &&
(iter.iomap.flags & IOMAP_F_NEW)) {
count_vm_event(PGMAJFAULT);
count_memcg_event_mm(vmf->vma->vm_mm, PGMAJFAULT);
ret |= VM_FAULT_MAJOR;
}
if (!(ret & VM_FAULT_ERROR))
iter.processed = PAGE_SIZE;
}
if (iomap_errp)
*iomap_errp = error;
if (!ret && error)
ret = dax_fault_return(error);
unlock_entry:
dax_unlock_entry(&xas, entry);
out:
trace_dax_pte_fault_done(iter.inode, vmf, ret);
return ret;
}
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
#ifdef CONFIG_FS_DAX_PMD
static bool dax_fault_check_fallback(struct vm_fault *vmf, struct xa_state *xas,
pgoff_t max_pgoff)
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
{
unsigned long pmd_addr = vmf->address & PMD_MASK;
bool write = vmf->flags & FAULT_FLAG_WRITE;
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
/*
* Make sure that the faulting address's PMD offset (color) matches
* the PMD offset from the start of the file. This is necessary so
* that a PMD range in the page table overlaps exactly with a PMD
* range in the page cache.
*/
if ((vmf->pgoff & PG_PMD_COLOUR) !=
((vmf->address >> PAGE_SHIFT) & PG_PMD_COLOUR))
return true;
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
/* Fall back to PTEs if we're going to COW */
if (write && !(vmf->vma->vm_flags & VM_SHARED))
return true;
/* If the PMD would extend outside the VMA */
if (pmd_addr < vmf->vma->vm_start)
return true;
if ((pmd_addr + PMD_SIZE) > vmf->vma->vm_end)
return true;
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
/* If the PMD would extend beyond the file size */
if ((xas->xa_index | PG_PMD_COLOUR) >= max_pgoff)
return true;
return false;
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
}
static vm_fault_t dax_iomap_pmd_fault(struct vm_fault *vmf, pfn_t *pfnp,
mm,fs,dax: change ->pmd_fault to ->huge_fault Patch series "1G transparent hugepage support for device dax", v2. The following series implements support for 1G trasparent hugepage on x86 for device dax. The bulk of the code was written by Mathew Wilcox a while back supporting transparent 1G hugepage for fs DAX. I have forward ported the relevant bits to 4.10-rc. The current submission has only the necessary code to support device DAX. Comments from Dan Williams: So the motivation and intended user of this functionality mirrors the motivation and users of 1GB page support in hugetlbfs. Given expected capacities of persistent memory devices an in-memory database may want to reduce tlb pressure beyond what they can already achieve with 2MB mappings of a device-dax file. We have customer feedback to that effect as Willy mentioned in his previous version of these patches [1]. [1]: https://lkml.org/lkml/2016/1/31/52 Comments from Nilesh @ Oracle: There are applications which have a process model; and if you assume 10,000 processes attempting to mmap all the 6TB memory available on a server; we are looking at the following: processes : 10,000 memory : 6TB pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB pmd @ 2M page size: 120,000 / 512 = ~240GB pud @ 1G page size: 240GB / 512 = ~480MB As you can see with 2M pages, this system will use up an exorbitant amount of DRAM to hold the page tables; but the 1G pages finally brings it down to a reasonable level. Memory sizes will keep increasing; so this number will keep increasing. An argument can be made to convert the applications from process model to thread model, but in the real world that may not be always practical. Hopefully this helps explain the use case where this is valuable. This patch (of 3): In preparation for adding the ability to handle PUD pages, convert vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The vm_fault structure is extended to include a union of the different page table pointers that may be needed, and three flag bits are reserved to indicate which type of pointer is in the union. [ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()] Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com [dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path] Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 01:56:59 +03:00
const struct iomap_ops *ops)
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
{
struct address_space *mapping = vmf->vma->vm_file->f_mapping;
XA_STATE_ORDER(xas, &mapping->i_pages, vmf->pgoff, PMD_ORDER);
struct iomap_iter iter = {
.inode = mapping->host,
.len = PMD_SIZE,
.flags = IOMAP_DAX | IOMAP_FAULT,
};
vm_fault_t ret = VM_FAULT_FALLBACK;
pgoff_t max_pgoff;
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
void *entry;
int error;
if (vmf->flags & FAULT_FLAG_WRITE)
iter.flags |= IOMAP_WRITE;
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
dax: add tracepoint infrastructure, PMD tracing Tracepoints are the standard way to capture debugging and tracing information in many parts of the kernel, including the XFS and ext4 filesystems. Create a tracepoint header for FS DAX and add the first DAX tracepoints to the PMD fault handler. This allows the tracing for DAX to be done in the same way as the filesystem tracing so that developers can look at them together and get a coherent idea of what the system is doing. I added both an entry and exit tracepoint because future patches will add tracepoints to child functions of dax_iomap_pmd_fault() like dax_pmd_load_hole() and dax_pmd_insert_mapping(). We want those messages to be wrapped by the parent function tracepoints so the code flow is more easily understood. Having entry and exit tracepoints for faults also allows us to easily see what filesystems functions were called during the fault. These filesystem functions get executed via iomap_begin() and iomap_end() calls, for example, and will have their own tracepoints. For PMD faults we primarily want to understand the type of mapping, the fault flags, the faulting address and whether it fell back to 4k faults. If it fell back to 4k faults the tracepoints should let us understand why. I named the new tracepoint header file "fs_dax.h" to allow for device DAX to have its own separate tracing header in the same directory at some point. Here is an example output for these events from a successful PMD fault: big-1441 [005] .... 32.582758: xfs_filemap_pmd_fault: dev 259:0 ino 0x1003 big-1441 [005] .... 32.582776: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 big-1441 [005] .... 32.583292: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 NOPAGE Link: http://lkml.kernel.org/r/1484085142-2297-3-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 02:39:50 +03:00
/*
* Check whether offset isn't beyond end of file now. Caller is
* supposed to hold locks serializing us with truncate / punch hole so
* this is a reliable test.
*/
max_pgoff = DIV_ROUND_UP(i_size_read(iter.inode), PAGE_SIZE);
dax: fix deadlock due to misaligned PMD faults In DAX there are two separate places where the 2MiB range of a PMD is defined. The first is in the page tables, where a PMD mapping inserted for a given address spans from (vmf->address & PMD_MASK) to ((vmf->address & PMD_MASK) + PMD_SIZE - 1). That is, from the 2MiB boundary below the address to the 2MiB boundary above the address. So, for example, a fault at address 3MiB (0x30 0000) falls within the PMD that ranges from 2MiB (0x20 0000) to 4MiB (0x40 0000). The second PMD range is in the mapping->page_tree, where a given file offset is covered by a radix tree entry that spans from one 2MiB aligned file offset to another 2MiB aligned file offset. So, for example, the file offset for 3MiB (pgoff 768) falls within the PMD range for the order 9 radix tree entry that ranges from 2MiB (pgoff 512) to 4MiB (pgoff 1024). This system works so long as the addresses and file offsets for a given mapping both have the same offsets relative to the start of each PMD. Consider the case where the starting address for a given file isn't 2MiB aligned - say our faulting address is 3 MiB (0x30 0000), but that corresponds to the beginning of our file (pgoff 0). Now all the PMDs in the mapping are misaligned so that the 2MiB range defined in the page tables never matches up with the 2MiB range defined in the radix tree. The current code notices this case for DAX faults to storage with the following test in dax_pmd_insert_mapping(): if (pfn_t_to_pfn(pfn) & PG_PMD_COLOUR) goto unlock_fallback; This test makes sure that the pfn we get from the driver is 2MiB aligned, and relies on the assumption that the 2MiB alignment of the pfn we get back from the driver matches the 2MiB alignment of the faulting address. However, faults to holes were not checked and we could hit the problem described above. This was reported in response to the NVML nvml/src/test/pmempool_sync TEST5: $ cd nvml/src/test/pmempool_sync $ make TEST5 You can grab NVML here: https://github.com/pmem/nvml/ The dmesg warning you see when you hit this error is: WARNING: CPU: 13 PID: 2900 at fs/dax.c:641 dax_insert_mapping_entry+0x2df/0x310 Where we notice in dax_insert_mapping_entry() that the radix tree entry we are about to replace doesn't match the locked entry that we had previously inserted into the tree. This happens because the initial insertion was done in grab_mapping_entry() using a pgoff calculated from the faulting address (vmf->address), and the replacement in dax_pmd_load_hole() => dax_insert_mapping_entry() is done using vmf->pgoff. In our failure case those two page offsets (one calculated from vmf->address, one using vmf->pgoff) point to different order 9 radix tree entries. This failure case can result in a deadlock because the radix tree unlock also happens on the pgoff calculated from vmf->address. This means that the locked radix tree entry that we swapped in to the tree in dax_insert_mapping_entry() using vmf->pgoff is never unlocked, so all future faults to that 2MiB range will block forever. Fix this by validating that the faulting address's PMD offset matches the PMD offset from the start of the file. This check is done at the very beginning of the fault and covers faults that would have mapped to storage as well as faults to holes. I left the COLOUR check in dax_pmd_insert_mapping() in place in case we ever hit the insanity condition where the alignment of the pfn we get from the driver doesn't match the alignment of the userspace address. Link: http://lkml.kernel.org/r/20170822222436.18926-1-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: "Slusarz, Marcin" <marcin.slusarz@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-26 01:55:36 +03:00
trace_dax_pmd_fault(iter.inode, vmf, max_pgoff, 0);
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
if (xas.xa_index >= max_pgoff) {
ret = VM_FAULT_SIGBUS;
dax: add tracepoint infrastructure, PMD tracing Tracepoints are the standard way to capture debugging and tracing information in many parts of the kernel, including the XFS and ext4 filesystems. Create a tracepoint header for FS DAX and add the first DAX tracepoints to the PMD fault handler. This allows the tracing for DAX to be done in the same way as the filesystem tracing so that developers can look at them together and get a coherent idea of what the system is doing. I added both an entry and exit tracepoint because future patches will add tracepoints to child functions of dax_iomap_pmd_fault() like dax_pmd_load_hole() and dax_pmd_insert_mapping(). We want those messages to be wrapped by the parent function tracepoints so the code flow is more easily understood. Having entry and exit tracepoints for faults also allows us to easily see what filesystems functions were called during the fault. These filesystem functions get executed via iomap_begin() and iomap_end() calls, for example, and will have their own tracepoints. For PMD faults we primarily want to understand the type of mapping, the fault flags, the faulting address and whether it fell back to 4k faults. If it fell back to 4k faults the tracepoints should let us understand why. I named the new tracepoint header file "fs_dax.h" to allow for device DAX to have its own separate tracing header in the same directory at some point. Here is an example output for these events from a successful PMD fault: big-1441 [005] .... 32.582758: xfs_filemap_pmd_fault: dev 259:0 ino 0x1003 big-1441 [005] .... 32.582776: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 big-1441 [005] .... 32.583292: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 NOPAGE Link: http://lkml.kernel.org/r/1484085142-2297-3-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 02:39:50 +03:00
goto out;
}
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
if (dax_fault_check_fallback(vmf, &xas, max_pgoff))
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
goto fallback;
/*
* grab_mapping_entry() will make sure we get an empty PMD entry,
* a zero PMD entry or a DAX PMD. If it can't (because a PTE
* entry is already in the array, for instance), it will return
* VM_FAULT_FALLBACK.
*/
entry = grab_mapping_entry(&xas, mapping, PMD_ORDER);
if (xa_is_internal(entry)) {
ret = xa_to_internal(entry);
goto fallback;
}
dax: fix race between colliding PMD & PTE entries We currently have two related PMD vs PTE races in the DAX code. These can both be easily triggered by having two threads reading and writing simultaneously to the same private mapping, with the key being that private mapping reads can be handled with PMDs but private mapping writes are always handled with PTEs so that we can COW. Here is the first race: CPU 0 CPU 1 (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK handle_pte_fault() passes check for pmd_devmap() (private mapping read) __handle_mm_fault() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD dax_iomap_pte_fault() does a PTE fault, but we already have a DAX PMD installed in our page tables at this spot. Here's the second race: CPU 0 CPU 1 (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() handle_pte_fault() dax_iomap_pte_fault() inserts PTE dax_iomap_pmd_fault() inserts PMD, but we already have a PTE at this spot. The core of the issue is that while there is isolation between faults to the same range in the DAX fault handlers via our DAX entry locking, there is no isolation between faults in the code in mm/memory.c. This means for instance that this code in __handle_mm_fault() can run: if (pmd_none(*vmf.pmd) && transparent_hugepage_enabled(vma)) { ret = create_huge_pmd(&vmf); But by the time we actually get to run the fault handler called by create_huge_pmd(), the PMD is no longer pmd_none() because a racing PTE fault has installed a normal PMD here as a parent. This is the cause of the 2nd race. The first race is similar - there is the following check in handle_pte_fault(): } else { /* See comment in pte_alloc_one_map() */ if (pmd_devmap(*vmf->pmd) || pmd_trans_unstable(vmf->pmd)) return 0; So if a pmd_devmap() PMD (a DAX PMD) has been installed at vmf->pmd, we will bail and retry the fault. This is correct, but there is nothing preventing the PMD from being installed after this check but before we actually get to the DAX PTE fault handlers. In my testing these races result in the following types of errors: BUG: Bad rss-counter state mm:ffff8800a817d280 idx:1 val:1 BUG: non-zero nr_ptes on freeing mm: 15 Fix this issue by having the DAX fault handlers verify that it is safe to continue their fault after they have taken an entry lock to block other racing faults. [ross.zwisler@linux.intel.com: improve fix for colliding PMD & PTE entries] Link: http://lkml.kernel.org/r/20170526195932.32178-1-ross.zwisler@linux.intel.com Link: http://lkml.kernel.org/r/20170522215749.23516-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Pawel Lebioda <pawel.lebioda@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Pawel Lebioda <pawel.lebioda@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Xiong Zhou <xzhou@redhat.com> Cc: Eryu Guan <eguan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-03 00:46:37 +03:00
/*
* It is possible, particularly with mixed reads & writes to private
* mappings, that we have raced with a PTE fault that overlaps with
* the PMD we need to set up. If so just return and the fault will be
* retried.
*/
if (!pmd_none(*vmf->pmd) && !pmd_trans_huge(*vmf->pmd) &&
!pmd_devmap(*vmf->pmd)) {
ret = 0;
dax: fix race between colliding PMD & PTE entries We currently have two related PMD vs PTE races in the DAX code. These can both be easily triggered by having two threads reading and writing simultaneously to the same private mapping, with the key being that private mapping reads can be handled with PMDs but private mapping writes are always handled with PTEs so that we can COW. Here is the first race: CPU 0 CPU 1 (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK handle_pte_fault() passes check for pmd_devmap() (private mapping read) __handle_mm_fault() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD dax_iomap_pte_fault() does a PTE fault, but we already have a DAX PMD installed in our page tables at this spot. Here's the second race: CPU 0 CPU 1 (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() handle_pte_fault() dax_iomap_pte_fault() inserts PTE dax_iomap_pmd_fault() inserts PMD, but we already have a PTE at this spot. The core of the issue is that while there is isolation between faults to the same range in the DAX fault handlers via our DAX entry locking, there is no isolation between faults in the code in mm/memory.c. This means for instance that this code in __handle_mm_fault() can run: if (pmd_none(*vmf.pmd) && transparent_hugepage_enabled(vma)) { ret = create_huge_pmd(&vmf); But by the time we actually get to run the fault handler called by create_huge_pmd(), the PMD is no longer pmd_none() because a racing PTE fault has installed a normal PMD here as a parent. This is the cause of the 2nd race. The first race is similar - there is the following check in handle_pte_fault(): } else { /* See comment in pte_alloc_one_map() */ if (pmd_devmap(*vmf->pmd) || pmd_trans_unstable(vmf->pmd)) return 0; So if a pmd_devmap() PMD (a DAX PMD) has been installed at vmf->pmd, we will bail and retry the fault. This is correct, but there is nothing preventing the PMD from being installed after this check but before we actually get to the DAX PTE fault handlers. In my testing these races result in the following types of errors: BUG: Bad rss-counter state mm:ffff8800a817d280 idx:1 val:1 BUG: non-zero nr_ptes on freeing mm: 15 Fix this issue by having the DAX fault handlers verify that it is safe to continue their fault after they have taken an entry lock to block other racing faults. [ross.zwisler@linux.intel.com: improve fix for colliding PMD & PTE entries] Link: http://lkml.kernel.org/r/20170526195932.32178-1-ross.zwisler@linux.intel.com Link: http://lkml.kernel.org/r/20170522215749.23516-2-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Pawel Lebioda <pawel.lebioda@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Pawel Lebioda <pawel.lebioda@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Xiong Zhou <xzhou@redhat.com> Cc: Eryu Guan <eguan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-03 00:46:37 +03:00
goto unlock_entry;
}
iter.pos = (loff_t)xas.xa_index << PAGE_SHIFT;
while ((error = iomap_iter(&iter, ops)) > 0) {
if (iomap_length(&iter) < PMD_SIZE)
continue; /* actually breaks out of the loop */
ret = dax_fault_iter(vmf, &iter, pfnp, &xas, &entry, true);
if (ret != VM_FAULT_FALLBACK)
iter.processed = PMD_SIZE;
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
}
unlock_entry:
dax_unlock_entry(&xas, entry);
fallback:
if (ret == VM_FAULT_FALLBACK) {
split_huge_pmd(vmf->vma, vmf->pmd, vmf->address);
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
count_vm_event(THP_FAULT_FALLBACK);
}
dax: add tracepoint infrastructure, PMD tracing Tracepoints are the standard way to capture debugging and tracing information in many parts of the kernel, including the XFS and ext4 filesystems. Create a tracepoint header for FS DAX and add the first DAX tracepoints to the PMD fault handler. This allows the tracing for DAX to be done in the same way as the filesystem tracing so that developers can look at them together and get a coherent idea of what the system is doing. I added both an entry and exit tracepoint because future patches will add tracepoints to child functions of dax_iomap_pmd_fault() like dax_pmd_load_hole() and dax_pmd_insert_mapping(). We want those messages to be wrapped by the parent function tracepoints so the code flow is more easily understood. Having entry and exit tracepoints for faults also allows us to easily see what filesystems functions were called during the fault. These filesystem functions get executed via iomap_begin() and iomap_end() calls, for example, and will have their own tracepoints. For PMD faults we primarily want to understand the type of mapping, the fault flags, the faulting address and whether it fell back to 4k faults. If it fell back to 4k faults the tracepoints should let us understand why. I named the new tracepoint header file "fs_dax.h" to allow for device DAX to have its own separate tracing header in the same directory at some point. Here is an example output for these events from a successful PMD fault: big-1441 [005] .... 32.582758: xfs_filemap_pmd_fault: dev 259:0 ino 0x1003 big-1441 [005] .... 32.582776: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 big-1441 [005] .... 32.583292: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 NOPAGE Link: http://lkml.kernel.org/r/1484085142-2297-3-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 02:39:50 +03:00
out:
trace_dax_pmd_fault_done(iter.inode, vmf, max_pgoff, ret);
return ret;
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
}
mm,fs,dax: change ->pmd_fault to ->huge_fault Patch series "1G transparent hugepage support for device dax", v2. The following series implements support for 1G trasparent hugepage on x86 for device dax. The bulk of the code was written by Mathew Wilcox a while back supporting transparent 1G hugepage for fs DAX. I have forward ported the relevant bits to 4.10-rc. The current submission has only the necessary code to support device DAX. Comments from Dan Williams: So the motivation and intended user of this functionality mirrors the motivation and users of 1GB page support in hugetlbfs. Given expected capacities of persistent memory devices an in-memory database may want to reduce tlb pressure beyond what they can already achieve with 2MB mappings of a device-dax file. We have customer feedback to that effect as Willy mentioned in his previous version of these patches [1]. [1]: https://lkml.org/lkml/2016/1/31/52 Comments from Nilesh @ Oracle: There are applications which have a process model; and if you assume 10,000 processes attempting to mmap all the 6TB memory available on a server; we are looking at the following: processes : 10,000 memory : 6TB pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB pmd @ 2M page size: 120,000 / 512 = ~240GB pud @ 1G page size: 240GB / 512 = ~480MB As you can see with 2M pages, this system will use up an exorbitant amount of DRAM to hold the page tables; but the 1G pages finally brings it down to a reasonable level. Memory sizes will keep increasing; so this number will keep increasing. An argument can be made to convert the applications from process model to thread model, but in the real world that may not be always practical. Hopefully this helps explain the use case where this is valuable. This patch (of 3): In preparation for adding the ability to handle PUD pages, convert vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The vm_fault structure is extended to include a union of the different page table pointers that may be needed, and three flag bits are reserved to indicate which type of pointer is in the union. [ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()] Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com [dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path] Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 01:56:59 +03:00
#else
static vm_fault_t dax_iomap_pmd_fault(struct vm_fault *vmf, pfn_t *pfnp,
const struct iomap_ops *ops)
mm,fs,dax: change ->pmd_fault to ->huge_fault Patch series "1G transparent hugepage support for device dax", v2. The following series implements support for 1G trasparent hugepage on x86 for device dax. The bulk of the code was written by Mathew Wilcox a while back supporting transparent 1G hugepage for fs DAX. I have forward ported the relevant bits to 4.10-rc. The current submission has only the necessary code to support device DAX. Comments from Dan Williams: So the motivation and intended user of this functionality mirrors the motivation and users of 1GB page support in hugetlbfs. Given expected capacities of persistent memory devices an in-memory database may want to reduce tlb pressure beyond what they can already achieve with 2MB mappings of a device-dax file. We have customer feedback to that effect as Willy mentioned in his previous version of these patches [1]. [1]: https://lkml.org/lkml/2016/1/31/52 Comments from Nilesh @ Oracle: There are applications which have a process model; and if you assume 10,000 processes attempting to mmap all the 6TB memory available on a server; we are looking at the following: processes : 10,000 memory : 6TB pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB pmd @ 2M page size: 120,000 / 512 = ~240GB pud @ 1G page size: 240GB / 512 = ~480MB As you can see with 2M pages, this system will use up an exorbitant amount of DRAM to hold the page tables; but the 1G pages finally brings it down to a reasonable level. Memory sizes will keep increasing; so this number will keep increasing. An argument can be made to convert the applications from process model to thread model, but in the real world that may not be always practical. Hopefully this helps explain the use case where this is valuable. This patch (of 3): In preparation for adding the ability to handle PUD pages, convert vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The vm_fault structure is extended to include a union of the different page table pointers that may be needed, and three flag bits are reserved to indicate which type of pointer is in the union. [ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()] Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com [dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path] Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 01:56:59 +03:00
{
return VM_FAULT_FALLBACK;
}
dax: add struct iomap based DAX PMD support DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based locking. This patch allows DAX PMDs to participate in the DAX radix tree based locking scheme so that they can be re-enabled using the new struct iomap based fault handlers. There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX mappings that have an associated block allocation, and 4k DAX empty entries. The empty entries exist to provide locking for the duration of a given page fault. This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP) entries, PMD DAX entries that have associated block allocations, and 2 MiB DAX empty entries. Unlike the 4k case where we insert a struct page* into the radix tree for 4k zero pages, for HZP we insert a DAX exceptional entry with the new RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in every 2MiB hole mapping, and it doesn't make sense to have that same struct page* with multiple entries in multiple trees. This would cause contention on the single page lock for the one Huge Zero Page, and it would break the page->index and page->mapping associations that are assumed to be valid in many other places in the kernel. One difficult use case is when one thread is trying to use 4k entries in radix tree for a given offset, and another thread is using 2 MiB entries for that same offset. The current code handles this by making the 2 MiB user fall back to 4k entries for most cases. This was done because it is the simplest solution, and because the use of 2MiB pages is already opportunistic. If we were to try to upgrade from 4k pages to 2MiB pages for a given range, we run into the problem of how we lock out 4k page faults for the entire 2MiB range while we clean out the radix tree so we can insert the 2MiB entry. We can solve this problem if we need to, but I think that the cases where both 2MiB entries and 4K entries are being used for the same range will be rare enough and the gain small enough that it probably won't be worth the complexity. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 03:34:45 +03:00
#endif /* CONFIG_FS_DAX_PMD */
mm,fs,dax: change ->pmd_fault to ->huge_fault Patch series "1G transparent hugepage support for device dax", v2. The following series implements support for 1G trasparent hugepage on x86 for device dax. The bulk of the code was written by Mathew Wilcox a while back supporting transparent 1G hugepage for fs DAX. I have forward ported the relevant bits to 4.10-rc. The current submission has only the necessary code to support device DAX. Comments from Dan Williams: So the motivation and intended user of this functionality mirrors the motivation and users of 1GB page support in hugetlbfs. Given expected capacities of persistent memory devices an in-memory database may want to reduce tlb pressure beyond what they can already achieve with 2MB mappings of a device-dax file. We have customer feedback to that effect as Willy mentioned in his previous version of these patches [1]. [1]: https://lkml.org/lkml/2016/1/31/52 Comments from Nilesh @ Oracle: There are applications which have a process model; and if you assume 10,000 processes attempting to mmap all the 6TB memory available on a server; we are looking at the following: processes : 10,000 memory : 6TB pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB pmd @ 2M page size: 120,000 / 512 = ~240GB pud @ 1G page size: 240GB / 512 = ~480MB As you can see with 2M pages, this system will use up an exorbitant amount of DRAM to hold the page tables; but the 1G pages finally brings it down to a reasonable level. Memory sizes will keep increasing; so this number will keep increasing. An argument can be made to convert the applications from process model to thread model, but in the real world that may not be always practical. Hopefully this helps explain the use case where this is valuable. This patch (of 3): In preparation for adding the ability to handle PUD pages, convert vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The vm_fault structure is extended to include a union of the different page table pointers that may be needed, and three flag bits are reserved to indicate which type of pointer is in the union. [ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()] Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com [dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path] Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 01:56:59 +03:00
/**
* dax_iomap_fault - handle a page fault on a DAX file
* @vmf: The description of the fault
* @pe_size: Size of the page to fault in
* @pfnp: PFN to insert for synchronous faults if fsync is required
* @iomap_errp: Storage for detailed error code in case of error
* @ops: Iomap ops passed from the file system
mm,fs,dax: change ->pmd_fault to ->huge_fault Patch series "1G transparent hugepage support for device dax", v2. The following series implements support for 1G trasparent hugepage on x86 for device dax. The bulk of the code was written by Mathew Wilcox a while back supporting transparent 1G hugepage for fs DAX. I have forward ported the relevant bits to 4.10-rc. The current submission has only the necessary code to support device DAX. Comments from Dan Williams: So the motivation and intended user of this functionality mirrors the motivation and users of 1GB page support in hugetlbfs. Given expected capacities of persistent memory devices an in-memory database may want to reduce tlb pressure beyond what they can already achieve with 2MB mappings of a device-dax file. We have customer feedback to that effect as Willy mentioned in his previous version of these patches [1]. [1]: https://lkml.org/lkml/2016/1/31/52 Comments from Nilesh @ Oracle: There are applications which have a process model; and if you assume 10,000 processes attempting to mmap all the 6TB memory available on a server; we are looking at the following: processes : 10,000 memory : 6TB pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB pmd @ 2M page size: 120,000 / 512 = ~240GB pud @ 1G page size: 240GB / 512 = ~480MB As you can see with 2M pages, this system will use up an exorbitant amount of DRAM to hold the page tables; but the 1G pages finally brings it down to a reasonable level. Memory sizes will keep increasing; so this number will keep increasing. An argument can be made to convert the applications from process model to thread model, but in the real world that may not be always practical. Hopefully this helps explain the use case where this is valuable. This patch (of 3): In preparation for adding the ability to handle PUD pages, convert vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The vm_fault structure is extended to include a union of the different page table pointers that may be needed, and three flag bits are reserved to indicate which type of pointer is in the union. [ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()] Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com [dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path] Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 01:56:59 +03:00
*
* When a page fault occurs, filesystems may call this helper in
* their fault handler for DAX files. dax_iomap_fault() assumes the caller
* has done all the necessary locking for page fault to proceed
* successfully.
*/
vm_fault_t dax_iomap_fault(struct vm_fault *vmf, enum page_entry_size pe_size,
pfn_t *pfnp, int *iomap_errp, const struct iomap_ops *ops)
mm,fs,dax: change ->pmd_fault to ->huge_fault Patch series "1G transparent hugepage support for device dax", v2. The following series implements support for 1G trasparent hugepage on x86 for device dax. The bulk of the code was written by Mathew Wilcox a while back supporting transparent 1G hugepage for fs DAX. I have forward ported the relevant bits to 4.10-rc. The current submission has only the necessary code to support device DAX. Comments from Dan Williams: So the motivation and intended user of this functionality mirrors the motivation and users of 1GB page support in hugetlbfs. Given expected capacities of persistent memory devices an in-memory database may want to reduce tlb pressure beyond what they can already achieve with 2MB mappings of a device-dax file. We have customer feedback to that effect as Willy mentioned in his previous version of these patches [1]. [1]: https://lkml.org/lkml/2016/1/31/52 Comments from Nilesh @ Oracle: There are applications which have a process model; and if you assume 10,000 processes attempting to mmap all the 6TB memory available on a server; we are looking at the following: processes : 10,000 memory : 6TB pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB pmd @ 2M page size: 120,000 / 512 = ~240GB pud @ 1G page size: 240GB / 512 = ~480MB As you can see with 2M pages, this system will use up an exorbitant amount of DRAM to hold the page tables; but the 1G pages finally brings it down to a reasonable level. Memory sizes will keep increasing; so this number will keep increasing. An argument can be made to convert the applications from process model to thread model, but in the real world that may not be always practical. Hopefully this helps explain the use case where this is valuable. This patch (of 3): In preparation for adding the ability to handle PUD pages, convert vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The vm_fault structure is extended to include a union of the different page table pointers that may be needed, and three flag bits are reserved to indicate which type of pointer is in the union. [ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()] Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com [dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path] Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 01:56:59 +03:00
{
switch (pe_size) {
case PE_SIZE_PTE:
return dax_iomap_pte_fault(vmf, pfnp, iomap_errp, ops);
case PE_SIZE_PMD:
return dax_iomap_pmd_fault(vmf, pfnp, ops);
mm,fs,dax: change ->pmd_fault to ->huge_fault Patch series "1G transparent hugepage support for device dax", v2. The following series implements support for 1G trasparent hugepage on x86 for device dax. The bulk of the code was written by Mathew Wilcox a while back supporting transparent 1G hugepage for fs DAX. I have forward ported the relevant bits to 4.10-rc. The current submission has only the necessary code to support device DAX. Comments from Dan Williams: So the motivation and intended user of this functionality mirrors the motivation and users of 1GB page support in hugetlbfs. Given expected capacities of persistent memory devices an in-memory database may want to reduce tlb pressure beyond what they can already achieve with 2MB mappings of a device-dax file. We have customer feedback to that effect as Willy mentioned in his previous version of these patches [1]. [1]: https://lkml.org/lkml/2016/1/31/52 Comments from Nilesh @ Oracle: There are applications which have a process model; and if you assume 10,000 processes attempting to mmap all the 6TB memory available on a server; we are looking at the following: processes : 10,000 memory : 6TB pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB pmd @ 2M page size: 120,000 / 512 = ~240GB pud @ 1G page size: 240GB / 512 = ~480MB As you can see with 2M pages, this system will use up an exorbitant amount of DRAM to hold the page tables; but the 1G pages finally brings it down to a reasonable level. Memory sizes will keep increasing; so this number will keep increasing. An argument can be made to convert the applications from process model to thread model, but in the real world that may not be always practical. Hopefully this helps explain the use case where this is valuable. This patch (of 3): In preparation for adding the ability to handle PUD pages, convert vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The vm_fault structure is extended to include a union of the different page table pointers that may be needed, and three flag bits are reserved to indicate which type of pointer is in the union. [ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()] Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com [dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path] Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 01:56:59 +03:00
default:
return VM_FAULT_FALLBACK;
}
}
EXPORT_SYMBOL_GPL(dax_iomap_fault);
/*
* dax_insert_pfn_mkwrite - insert PTE or PMD entry into page tables
* @vmf: The description of the fault
* @pfn: PFN to insert
* @order: Order of entry to insert.
*
* This function inserts a writeable PTE or PMD entry into the page tables
* for an mmaped DAX file. It also marks the page cache entry as dirty.
*/
static vm_fault_t
dax_insert_pfn_mkwrite(struct vm_fault *vmf, pfn_t pfn, unsigned int order)
{
struct address_space *mapping = vmf->vma->vm_file->f_mapping;
XA_STATE_ORDER(xas, &mapping->i_pages, vmf->pgoff, order);
void *entry;
vm_fault_t ret;
xas_lock_irq(&xas);
entry = get_unlocked_entry(&xas, order);
/* Did we race with someone splitting entry or so? */
if (!entry || dax_is_conflict(entry) ||
(order == 0 && !dax_is_pte_entry(entry))) {
put_unlocked_entry(&xas, entry, WAKE_NEXT);
xas_unlock_irq(&xas);
trace_dax_insert_pfn_mkwrite_no_entry(mapping->host, vmf,
VM_FAULT_NOPAGE);
return VM_FAULT_NOPAGE;
}
xas_set_mark(&xas, PAGECACHE_TAG_DIRTY);
dax_lock_entry(&xas, entry);
xas_unlock_irq(&xas);
if (order == 0)
ret = vmf_insert_mixed_mkwrite(vmf->vma, vmf->address, pfn);
#ifdef CONFIG_FS_DAX_PMD
else if (order == PMD_ORDER)
mm/huge_memory: fix vmf_insert_pfn_{pmd, pud}() crash, handle unaligned addresses Starting with c6f3c5ee40c1 ("mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()") vmf_insert_pfn_pmd() internally calls pmdp_set_access_flags(). That helper enforces a pmd aligned @address argument via VM_BUG_ON() assertion. Update the implementation to take a 'struct vm_fault' argument directly and apply the address alignment fixup internally to fix crash signatures like: kernel BUG at arch/x86/mm/pgtable.c:515! invalid opcode: 0000 [#1] SMP NOPTI CPU: 51 PID: 43713 Comm: java Tainted: G OE 4.19.35 #1 [..] RIP: 0010:pmdp_set_access_flags+0x48/0x50 [..] Call Trace: vmf_insert_pfn_pmd+0x198/0x350 dax_iomap_fault+0xe82/0x1190 ext4_dax_huge_fault+0x103/0x1f0 ? __switch_to_asm+0x40/0x70 __handle_mm_fault+0x3f6/0x1370 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 handle_mm_fault+0xda/0x200 __do_page_fault+0x249/0x4f0 do_page_fault+0x32/0x110 ? page_fault+0x8/0x30 page_fault+0x1e/0x30 Link: http://lkml.kernel.org/r/155741946350.372037.11148198430068238140.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: c6f3c5ee40c1 ("mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Piotr Balcer <piotr.balcer@intel.com> Tested-by: Yan Ma <yan.ma@intel.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Chandan Rajendra <chandan@linux.ibm.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 03:15:33 +03:00
ret = vmf_insert_pfn_pmd(vmf, pfn, FAULT_FLAG_WRITE);
#endif
else
ret = VM_FAULT_FALLBACK;
dax_unlock_entry(&xas, entry);
trace_dax_insert_pfn_mkwrite(mapping->host, vmf, ret);
return ret;
}
/**
* dax_finish_sync_fault - finish synchronous page fault
* @vmf: The description of the fault
* @pe_size: Size of entry to be inserted
* @pfn: PFN to insert
*
* This function ensures that the file range touched by the page fault is
* stored persistently on the media and handles inserting of appropriate page
* table entry.
*/
vm_fault_t dax_finish_sync_fault(struct vm_fault *vmf,
enum page_entry_size pe_size, pfn_t pfn)
{
int err;
loff_t start = ((loff_t)vmf->pgoff) << PAGE_SHIFT;
unsigned int order = pe_order(pe_size);
size_t len = PAGE_SIZE << order;
err = vfs_fsync_range(vmf->vma->vm_file, start, start + len - 1, 1);
if (err)
return VM_FAULT_SIGBUS;
return dax_insert_pfn_mkwrite(vmf, pfn, order);
}
EXPORT_SYMBOL_GPL(dax_finish_sync_fault);
static loff_t dax_range_compare_iter(struct iomap_iter *it_src,
struct iomap_iter *it_dest, u64 len, bool *same)
{
const struct iomap *smap = &it_src->iomap;
const struct iomap *dmap = &it_dest->iomap;
loff_t pos1 = it_src->pos, pos2 = it_dest->pos;
void *saddr, *daddr;
int id, ret;
len = min(len, min(smap->length, dmap->length));
if (smap->type == IOMAP_HOLE && dmap->type == IOMAP_HOLE) {
*same = true;
return len;
}
if (smap->type == IOMAP_HOLE || dmap->type == IOMAP_HOLE) {
*same = false;
return 0;
}
id = dax_read_lock();
ret = dax_iomap_direct_access(smap, pos1, ALIGN(pos1 + len, PAGE_SIZE),
&saddr, NULL);
if (ret < 0)
goto out_unlock;
ret = dax_iomap_direct_access(dmap, pos2, ALIGN(pos2 + len, PAGE_SIZE),
&daddr, NULL);
if (ret < 0)
goto out_unlock;
*same = !memcmp(saddr, daddr, len);
if (!*same)
len = 0;
dax_read_unlock(id);
return len;
out_unlock:
dax_read_unlock(id);
return -EIO;
}
int dax_dedupe_file_range_compare(struct inode *src, loff_t srcoff,
struct inode *dst, loff_t dstoff, loff_t len, bool *same,
const struct iomap_ops *ops)
{
struct iomap_iter src_iter = {
.inode = src,
.pos = srcoff,
.len = len,
.flags = IOMAP_DAX,
};
struct iomap_iter dst_iter = {
.inode = dst,
.pos = dstoff,
.len = len,
.flags = IOMAP_DAX,
};
int ret, compared = 0;
while ((ret = iomap_iter(&src_iter, ops)) > 0 &&
(ret = iomap_iter(&dst_iter, ops)) > 0) {
compared = dax_range_compare_iter(&src_iter, &dst_iter, len,
same);
if (compared < 0)
return ret;
src_iter.processed = dst_iter.processed = compared;
}
return ret;
}
int dax_remap_file_range_prep(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
loff_t *len, unsigned int remap_flags,
const struct iomap_ops *ops)
{
return __generic_remap_file_range_prep(file_in, pos_in, file_out,
pos_out, len, remap_flags, ops);
}
EXPORT_SYMBOL_GPL(dax_remap_file_range_prep);