2007-06-12 17:07:21 +04:00
/*
* Copyright ( C ) 2007 Oracle . All rights reserved .
*
* This program is free software ; you can redistribute it and / or
* modify it under the terms of the GNU General Public
* License v2 as published by the Free Software Foundation .
*
* This program is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the GNU
* General Public License for more details .
*
* You should have received a copy of the GNU General Public
* License along with this program ; if not , write to the
* Free Software Foundation , Inc . , 59 Temple Place - Suite 330 ,
* Boston , MA 021110 - 1307 , USA .
*/
2007-04-02 18:50:19 +04:00
# ifndef __BTRFS_I__
# define __BTRFS_I__
Btrfs: improve inode hash function/inode lookup
Currently the hash value used for adding an inode to the VFS's inode
hash table consists of the plain inode number, which is a 64 bits
integer. This results in hash table buckets (hlist_head lists) with
too many elements for at least 2 important scenarios:
1) When we have many subvolumes. Each subvolume has its own btree
where its files and directories are added to, and each has its
own objectid (inode number) namespace. This means that if we have
N subvolumes, and all have inode number X associated to a file or
directory, the corresponding inodes all map to the same hash table
entry, resulting in a bucket (hlist_head list) with N elements;
2) On 32 bits machines. Th VFS hash values are unsigned longs, which
are 32 bits wide on 32 bits machines, and the inode (objectid)
numbers are 64 bits unsigned integers. We simply cast the inode
numbers to hash values, which means that for all inodes with the
same 32 bits lower half, the same hash bucket is used for all of
them. For example, all inodes with a number (objectid) between
0x0000_0000_ffff_ffff and 0xffff_ffff_ffff_ffff will end up in
the same hash table bucket.
This change ensures the inode's hash value depends both on the
objectid (inode number) and its subvolume's (btree root) objectid.
For 32 bits machines, this change gives better entropy by making
the hash value depend on both the upper and lower 32 bits of the
64 bits hash previously computed.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-10-07 01:22:33 +04:00
# include <linux/hash.h>
2007-08-28 00:49:44 +04:00
# include "extent_map.h"
2008-01-25 00:13:08 +03:00
# include "extent_io.h"
2008-07-17 20:53:50 +04:00
# include "ordered-data.h"
btrfs: implement delayed inode items operation
Changelog V5 -> V6:
- Fix oom when the memory load is high, by storing the delayed nodes into the
root's radix tree, and letting btrfs inodes go.
Changelog V4 -> V5:
- Fix the race on adding the delayed node to the inode, which is spotted by
Chris Mason.
- Merge Chris Mason's incremental patch into this patch.
- Fix deadlock between readdir() and memory fault, which is reported by
Itaru Kitayama.
Changelog V3 -> V4:
- Fix nested lock, which is reported by Itaru Kitayama, by updating space cache
inode in time.
Changelog V2 -> V3:
- Fix the race between the delayed worker and the task which does delayed items
balance, which is reported by Tsutomu Itoh.
- Modify the patch address David Sterba's comment.
- Fix the bug of the cpu recursion spinlock, reported by Chris Mason
Changelog V1 -> V2:
- break up the global rb-tree, use a list to manage the delayed nodes,
which is created for every directory and file, and used to manage the
delayed directory name index items and the delayed inode item.
- introduce a worker to deal with the delayed nodes.
Compare with Ext3/4, the performance of file creation and deletion on btrfs
is very poor. the reason is that btrfs must do a lot of b+ tree insertions,
such as inode item, directory name item, directory name index and so on.
If we can do some delayed b+ tree insertion or deletion, we can improve the
performance, so we made this patch which implemented delayed directory name
index insertion/deletion and delayed inode update.
Implementation:
- introduce a delayed root object into the filesystem, that use two lists to
manage the delayed nodes which are created for every file/directory.
One is used to manage all the delayed nodes that have delayed items. And the
other is used to manage the delayed nodes which is waiting to be dealt with
by the work thread.
- Every delayed node has two rb-tree, one is used to manage the directory name
index which is going to be inserted into b+ tree, and the other is used to
manage the directory name index which is going to be deleted from b+ tree.
- introduce a worker to deal with the delayed operation. This worker is used
to deal with the works of the delayed directory name index items insertion
and deletion and the delayed inode update.
When the delayed items is beyond the lower limit, we create works for some
delayed nodes and insert them into the work queue of the worker, and then
go back.
When the delayed items is beyond the upper bound, we create works for all
the delayed nodes that haven't been dealt with, and insert them into the work
queue of the worker, and then wait for that the untreated items is below some
threshold value.
- When we want to insert a directory name index into b+ tree, we just add the
information into the delayed inserting rb-tree.
And then we check the number of the delayed items and do delayed items
balance. (The balance policy is above.)
- When we want to delete a directory name index from the b+ tree, we search it
in the inserting rb-tree at first. If we look it up, just drop it. If not,
add the key of it into the delayed deleting rb-tree.
Similar to the delayed inserting rb-tree, we also check the number of the
delayed items and do delayed items balance.
(The same to inserting manipulation)
- When we want to update the metadata of some inode, we cached the data of the
inode into the delayed node. the worker will flush it into the b+ tree after
dealing with the delayed insertion and deletion.
- We will move the delayed node to the tail of the list after we access the
delayed node, By this way, we can cache more delayed items and merge more
inode updates.
- If we want to commit transaction, we will deal with all the delayed node.
- the delayed node will be freed when we free the btrfs inode.
- Before we log the inode items, we commit all the directory name index items
and the delayed inode update.
I did a quick test by the benchmark tool[1] and found we can improve the
performance of file creation by ~15%, and file deletion by ~20%.
Before applying this patch:
Create files:
Total files: 50000
Total time: 1.096108
Average time: 0.000022
Delete files:
Total files: 50000
Total time: 1.510403
Average time: 0.000030
After applying this patch:
Create files:
Total files: 50000
Total time: 0.932899
Average time: 0.000019
Delete files:
Total files: 50000
Total time: 1.215732
Average time: 0.000024
[1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3
Many thanks for Kitayama-san's help!
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-22 14:12:22 +04:00
# include "delayed-inode.h"
2007-08-28 00:49:44 +04:00
2012-05-23 22:13:11 +04:00
/*
* ordered_data_close is set by truncate when a file that used
* to have good data has been truncated to zero . When it is set
* the btrfs file release call will add this inode to the
* ordered operations list so that we make sure to flush out any
* new data the application may have written before commit .
*/
# define BTRFS_INODE_ORDERED_DATA_CLOSE 0
# define BTRFS_INODE_ORPHAN_META_RESERVED 1
# define BTRFS_INODE_DUMMY 2
# define BTRFS_INODE_IN_DEFRAG 3
# define BTRFS_INODE_DELALLOC_META_RESERVED 4
2012-05-23 22:26:42 +04:00
# define BTRFS_INODE_HAS_ORPHAN_ITEM 5
2012-06-08 23:26:47 +04:00
# define BTRFS_INODE_HAS_ASYNC_EXTENT 6
Btrfs: turbo charge fsync
At least for the vm workload. Currently on fsync we will
1) Truncate all items in the log tree for the given inode if they exist
and
2) Copy all items for a given inode into the log
The problem with this is that for things like VMs you can have lots of
extents from the fragmented writing behavior, and worst yet you may have
only modified a few extents, not the entire thing. This patch fixes this
problem by tracking which transid modified our extent, and then when we do
the tree logging we find all of the extents we've modified in our current
transaction, sort them and commit them. We also only truncate up to the
xattrs of the inode and copy that stuff in normally, and then just drop any
extents in the range we have that exist in the log already. Here are some
numbers of a 50 meg fio job that does random writes and fsync()s after every
write
Original Patched
SATA drive 82KB/s 140KB/s
Fusion drive 431KB/s 2532KB/s
So around 2-6 times faster depending on your hardware. There are a few
corner cases, for example if you truncate at all we have to do it the old
way since there is no way to be sure what is in the log is ok. This
probably could be done smarter, but if you write-fsync-truncate-write-fsync
you deserve what you get. All this work is in RAM of course so if your
inode gets evicted from cache and you read it in and fsync it we'll do it
the slow way if we are still in the same transaction that we last modified
the inode in.
The biggest cool part of this is that it requires no changes to the recovery
code, so if you fsync with this patch and crash and load an old kernel, it
will run the recovery and be a-ok. I have tested this pretty thoroughly
with an fsync tester and everything comes back fine, as well as xfstests.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2012-08-17 21:14:17 +04:00
# define BTRFS_INODE_NEEDS_FULL_SYNC 7
2012-10-11 23:53:56 +04:00
# define BTRFS_INODE_COPY_EVERYTHING 8
2013-01-29 14:11:59 +04:00
# define BTRFS_INODE_IN_DELALLOC_LIST 9
2013-02-08 11:01:08 +04:00
# define BTRFS_INODE_READDIO_NEED_LOCK 10
Btrfs: add support for inode properties
This change adds infrastructure to allow for generic properties for
inodes. Properties are name/value pairs that can be associated with
inodes for different purposes. They are stored as xattrs with the
prefix "btrfs."
Properties can be inherited - this means when a directory inode has
inheritable properties set, these are added to new inodes created
under that directory. Further, subvolumes can also have properties
associated with them, and they can be inherited from their parent
subvolume. Naturally, directory properties have priority over subvolume
properties (in practice a subvolume property is just a regular
property associated with the root inode, objectid 256, of the
subvolume's fs tree).
This change also adds one specific property implementation, named
"compression", whose values can be "lzo" or "zlib" and it's an
inheritable property.
The corresponding changes to btrfs-progs were also implemented.
A patch with xfstests for this feature will follow once there's
agreement on this change/feature.
Further, the script at the bottom of this commit message was used to
do some benchmarks to measure any performance penalties of this feature.
Basically the tests correspond to:
Test 1 - create a filesystem and mount it with compress-force=lzo,
then sequentially create N files of 64Kb each, measure how long it took
to create the files, unmount the filesystem, mount the filesystem and
perform an 'ls -lha' against the test directory holding the N files, and
report the time the command took.
Test 2 - create a filesystem and don't use any compression option when
mounting it - instead set the compression property of the subvolume's
root to 'lzo'. Then create N files of 64Kb, and report the time it took.
The unmount the filesystem, mount it again and perform an 'ls -lha' like
in the former test. This means every single file ends up with a property
(xattr) associated to it.
Test 3 - same as test 2, but uses 4 properties - 3 are duplicates of the
compression property, have no real effect other than adding more work
when inheriting properties and taking more btree leaf space.
Test 4 - same as test 3 but with 10 properties per file.
Results (in seconds, and averages of 5 runs each), for different N
numbers of files follow.
* Without properties (test 1)
file creation time ls -lha time
10 000 files 3.49 0.76
100 000 files 47.19 8.37
1 000 000 files 518.51 107.06
* With 1 property (compression property set to lzo - test 2)
file creation time ls -lha time
10 000 files 3.63 0.93
100 000 files 48.56 9.74
1 000 000 files 537.72 125.11
* With 4 properties (test 3)
file creation time ls -lha time
10 000 files 3.94 1.20
100 000 files 52.14 11.48
1 000 000 files 572.70 142.13
* With 10 properties (test 4)
file creation time ls -lha time
10 000 files 4.61 1.35
100 000 files 58.86 13.83
1 000 000 files 656.01 177.61
The increased latencies with properties are essencialy because of:
*) When creating an inode, we now synchronously write 1 more item
(an xattr item) for each property inherited from the parent dir
(or subvolume). This could be done in an asynchronous way such
as we do for dir intex items (delayed-inode.c), which could help
reduce the file creation latency;
*) With properties, we now have larger fs trees. For this particular
test each xattr item uses 75 bytes of leaf space in the fs tree.
This could be less by using a new item for xattr items, instead of
the current btrfs_dir_item, since we could cut the 'location' and
'type' fields (saving 18 bytes) and maybe 'transid' too (saving a
total of 26 bytes per xattr item) from the btrfs_dir_item type.
Also tried batching the xattr insertions (ignoring proper hash
collision handling, since it didn't exist) when creating files that
inherit properties from their parent inode/subvolume, but the end
results were (surprisingly) essentially the same.
Test script:
$ cat test.pl
#!/usr/bin/perl -w
use strict;
use Time::HiRes qw(time);
use constant NUM_FILES => 10_000;
use constant FILE_SIZES => (64 * 1024);
use constant DEV => '/dev/sdb4';
use constant MNT_POINT => '/home/fdmanana/btrfs-tests/dev';
use constant TEST_DIR => (MNT_POINT . '/testdir');
system("mkfs.btrfs", "-l", "16384", "-f", DEV) == 0 or die "mkfs.btrfs failed!";
# following line for testing without properties
#system("mount", "-o", "compress-force=lzo", DEV, MNT_POINT) == 0 or die "mount failed!";
# following 2 lines for testing with properties
system("mount", DEV, MNT_POINT) == 0 or die "mount failed!";
system("btrfs", "prop", "set", MNT_POINT, "compression", "lzo") == 0 or die "set prop failed!";
system("mkdir", TEST_DIR) == 0 or die "mkdir failed!";
my ($t1, $t2);
$t1 = time();
for (my $i = 1; $i <= NUM_FILES; $i++) {
my $p = TEST_DIR . '/file_' . $i;
open(my $f, '>', $p) or die "Error opening file!";
$f->autoflush(1);
for (my $j = 0; $j < FILE_SIZES; $j += 4096) {
print $f ('A' x 4096) or die "Error writing to file!";
}
close($f);
}
$t2 = time();
print "Time to create " . NUM_FILES . ": " . ($t2 - $t1) . " seconds.\n";
system("umount", DEV) == 0 or die "umount failed!";
system("mount", DEV, MNT_POINT) == 0 or die "mount failed!";
$t1 = time();
system("bash -c 'ls -lha " . TEST_DIR . " > /dev/null'") == 0 or die "ls failed!";
$t2 = time();
print "Time to ls -lha all files: " . ($t2 - $t1) . " seconds.\n";
system("umount", DEV) == 0 or die "umount failed!";
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-01-07 15:47:46 +04:00
# define BTRFS_INODE_HAS_PROPS 11
Btrfs: be aware of btree inode write errors to avoid fs corruption
While we have a transaction ongoing, the VM might decide at any time
to call btree_inode->i_mapping->a_ops->writepages(), which will start
writeback of dirty pages belonging to btree nodes/leafs. This call
might return an error or the writeback might finish with an error
before we attempt to commit the running transaction. If this happens,
we might have no way of knowing that such error happened when we are
committing the transaction - because the pages might no longer be
marked dirty nor tagged for writeback (if a subsequent modification
to the extent buffer didn't happen before the transaction commit) which
makes filemap_fdata[write|wait]_range unable to find such pages (even
if they're marked with SetPageError).
So if this happens we must abort the transaction, otherwise we commit
a super block with btree roots that point to btree nodes/leafs whose
content on disk is invalid - either garbage or the content of some
node/leaf from a past generation that got cowed or deleted and is no
longer valid (for this later case we end up getting error messages like
"parent transid verify failed on 10826481664 wanted 25748 found 29562"
when reading btree nodes/leafs from disk).
Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's
i_mapping would not be enough because we need to distinguish between
log tree extents (not fatal) vs non-log tree extents (fatal) and
because the next call to filemap_fdatawait_range() will catch and clear
such errors in the mapping - and that call might be from a log sync and
not from a transaction commit, which means we would not know about the
error at transaction commit time. Also, checking for the eb flag
EXTENT_BUFFER_IOERR at transaction commit time isn't done and would
not be completely reliable, as the eb might be removed from memory and
read back when trying to get it, which clears that flag right before
reading the eb's pages from disk, making us not know about the previous
write error.
Using the new 3 flags for the btree inode also makes us achieve the
goal of AS_EIO/AS_ENOSPC when writepages() returns success, started
writeback for all dirty pages and before filemap_fdatawait_range() is
called, the writeback for all dirty pages had already finished with
errors - because we were not using AS_EIO/AS_ENOSPC,
filemap_fdatawait_range() would return success, as it could not know
that writeback errors happened (the pages were no longer tagged for
writeback).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 15:25:56 +04:00
/*
* The following 3 bits are meant only for the btree inode .
* When any of them is set , it means an error happened while writing an
* extent buffer belonging to :
* 1 ) a non - log btree
* 2 ) a log btree and first log sub - transaction
* 3 ) a log btree and second log sub - transaction
*/
# define BTRFS_INODE_BTREE_ERR 12
# define BTRFS_INODE_BTREE_LOG1_ERR 13
# define BTRFS_INODE_BTREE_LOG2_ERR 14
2012-05-23 22:13:11 +04:00
2007-06-14 00:18:26 +04:00
/* in memory btrfs inode */
2007-04-02 18:50:19 +04:00
struct btrfs_inode {
2008-09-29 23:18:18 +04:00
/* which subvolume this inode belongs to */
2007-04-06 23:37:36 +04:00
struct btrfs_root * root ;
2008-09-29 23:18:18 +04:00
/* key used to find this inode on disk. This is used by the code
* to read in roots of subvolumes
*/
2007-04-06 23:37:36 +04:00
struct btrfs_key location ;
2008-09-29 23:18:18 +04:00
2011-07-15 19:16:44 +04:00
/* Lock for counters */
spinlock_t lock ;
2008-09-29 23:18:18 +04:00
/* the extent_tree has caches of all the extent mappings to disk */
2007-08-28 00:49:44 +04:00
struct extent_map_tree extent_tree ;
2008-09-29 23:18:18 +04:00
/* the io_tree does range state (DIRTY, LOCKED etc) */
2008-01-25 00:13:08 +03:00
struct extent_io_tree io_tree ;
2008-09-29 23:18:18 +04:00
/* special utility tree used to record which mirrors have already been
* tried when checksums fail for a given block
*/
2008-04-10 00:28:12 +04:00
struct extent_io_tree io_failure_tree ;
2008-09-29 23:18:18 +04:00
/* held while logging the inode in tree-log.c */
2008-09-06 00:13:11 +04:00
struct mutex log_mutex ;
2008-09-29 23:18:18 +04:00
2012-01-13 21:09:22 +04:00
/* held while doing delalloc reservations */
struct mutex delalloc_mutex ;
2008-09-29 23:18:18 +04:00
/* used to order data wrt metadata */
2008-07-17 20:53:50 +04:00
struct btrfs_ordered_inode_tree ordered_tree ;
2007-08-11 00:22:09 +04:00
2008-09-29 23:18:18 +04:00
/* list of all the delalloc inodes in the FS. There are times we need
* to write all the delalloc pages to disk , and this list is used
* to walk them all .
*/
2008-08-05 07:17:27 +04:00
struct list_head delalloc_inodes ;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)
This commit introduces a new kind of back reference for btrfs metadata.
Once a filesystem has been mounted with this commit, IT WILL NO LONGER
BE MOUNTABLE BY OLDER KERNELS.
When a tree block in subvolume tree is cow'd, the reference counts of all
extents it points to are increased by one. At transaction commit time,
the old root of the subvolume is recorded in a "dead root" data structure,
and the btree it points to is later walked, dropping reference counts
and freeing any blocks where the reference count goes to 0.
The increments done during cow and decrements done after commit cancel out,
and the walk is a very expensive way to go about freeing the blocks that
are no longer referenced by the new btree root. This commit reduces the
transaction overhead by avoiding the need for dead root records.
When a non-shared tree block is cow'd, we free the old block at once, and the
new block inherits old block's references. When a tree block with reference
count > 1 is cow'd, we increase the reference counts of all extents
the new block points to by one, and decrease the old block's reference count by
one.
This dead tree avoidance code removes the need to modify the reference
counts of lower level extents when a non-shared tree block is cow'd.
But we still need to update back ref for all pointers in the block.
This is because the location of the block is recorded in the back ref
item.
We can solve this by introducing a new type of back ref. The new
back ref provides information about pointer's key, level and in which
tree the pointer lives. This information allow us to find the pointer
by searching the tree. The shortcoming of the new back ref is that it
only works for pointers in tree blocks referenced by their owner trees.
This is mostly a problem for snapshots, where resolving one of these
fuzzy back references would be O(number_of_snapshots) and quite slow.
The solution used here is to use the fuzzy back references in the common
case where a given tree block is only referenced by one root,
and use the full back references when multiple roots have a reference
on a given block.
This commit adds per subvolume red-black tree to keep trace of cached
inodes. The red-black tree helps the balancing code to find cached
inodes whose inode numbers within a given range.
This commit improves the balancing code by introducing several data
structures to keep the state of balancing. The most important one
is the back ref cache. It caches how the upper level tree blocks are
referenced. This greatly reduce the overhead of checking back ref.
The improved balancing code scales significantly better with a large
number of snapshots.
This is a very large commit and was written in a number of
pieces. But, they depend heavily on the disk format change and were
squashed together to make sure git bisect didn't end up in a
bad state wrt space balancing or the format change.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
/* node for the red-black tree that links inodes in subvolume root */
struct rb_node rb_node ;
2012-05-23 22:13:11 +04:00
unsigned long runtime_flags ;
2013-04-15 04:44:02 +04:00
/* Keep track of who's O_SYNC/fsyncing currently */
2012-11-16 22:56:32 +04:00
atomic_t sync_writers ;
2008-09-29 23:18:18 +04:00
/* full 64 bit generation number, struct vfs_inode doesn't have a big
* enough field for this .
*/
2008-09-06 00:13:11 +04:00
u64 generation ;
2007-08-11 00:22:09 +04:00
/*
* transid of the trans_handle that last modified this inode
*/
u64 last_trans ;
2009-10-13 21:21:08 +04:00
/*
2014-02-20 14:08:56 +04:00
* transid that last logged this inode
2009-10-13 21:21:08 +04:00
*/
2014-02-20 14:08:56 +04:00
u64 logged_trans ;
2009-10-13 21:21:08 +04:00
2008-09-06 00:13:11 +04:00
/*
2014-02-20 14:08:56 +04:00
* log transid when this inode was last modified
2008-09-06 00:13:11 +04:00
*/
2014-02-20 14:08:56 +04:00
int last_sub_trans ;
/* a local copy of root's last_log_commit */
int last_log_commit ;
2008-09-11 23:53:12 +04:00
2008-09-29 23:18:18 +04:00
/* total number of bytes pending delalloc, used by stat to calc the
* real block usage of the file
*/
2008-02-08 21:49:28 +03:00
u64 delalloc_bytes ;
2008-09-29 23:18:18 +04:00
2014-07-03 14:22:07 +04:00
/*
* total number of bytes pending defrag , used by stat to check whether
* it needs COW .
*/
u64 defrag_bytes ;
2008-09-29 23:18:18 +04:00
/*
* the size of the file stored in the metadata on disk . data = ordered
* means the in - memory i_size might be larger than the size on disk
* because not all the blocks are written yet .
*/
2008-07-17 20:54:05 +04:00
u64 disk_i_size ;
2008-09-29 23:18:18 +04:00
2008-07-24 20:12:38 +04:00
/*
* if this is a directory then index_cnt is the counter for the index
* number for new files that are created
*/
u64 index_cnt ;
2008-09-29 23:18:18 +04:00
2013-12-26 09:07:06 +04:00
/* Cache the directory index number to speed the dir/file remove */
u64 dir_index ;
2009-03-24 17:24:20 +03:00
/* the fsync log has some corner cases that mean we have to check
* directories to see if any unlinks have been done before
* the directory was logged . See tree - log . c for all the
* details
*/
u64 last_unlink_trans ;
2011-08-04 18:25:02 +04:00
/*
* Number of bytes outstanding that are going to need csums . This is
* used in ENOSPC accounting .
*/
u64 csum_bytes ;
2011-07-14 22:28:08 +04:00
/* flags field from the on disk inode */
u32 flags ;
2009-09-12 00:12:44 +04:00
/*
2009-10-08 21:34:05 +04:00
* Counters to keep track of the number of extent item ' s we may use due
* to delalloc and such . outstanding_extents is the number of extent
* items we think we ' ll end up using , and reserved_extents is the number
* of extent items we ' ve reserved metadata for .
2009-09-12 00:12:44 +04:00
*/
2011-07-15 19:16:44 +04:00
unsigned outstanding_extents ;
unsigned reserved_extents ;
2009-09-12 00:12:44 +04:00
2010-03-11 17:42:04 +03:00
/*
* always compress this one file
*/
2012-05-23 22:13:11 +04:00
unsigned force_compress ;
2010-03-11 17:42:04 +03:00
btrfs: implement delayed inode items operation
Changelog V5 -> V6:
- Fix oom when the memory load is high, by storing the delayed nodes into the
root's radix tree, and letting btrfs inodes go.
Changelog V4 -> V5:
- Fix the race on adding the delayed node to the inode, which is spotted by
Chris Mason.
- Merge Chris Mason's incremental patch into this patch.
- Fix deadlock between readdir() and memory fault, which is reported by
Itaru Kitayama.
Changelog V3 -> V4:
- Fix nested lock, which is reported by Itaru Kitayama, by updating space cache
inode in time.
Changelog V2 -> V3:
- Fix the race between the delayed worker and the task which does delayed items
balance, which is reported by Tsutomu Itoh.
- Modify the patch address David Sterba's comment.
- Fix the bug of the cpu recursion spinlock, reported by Chris Mason
Changelog V1 -> V2:
- break up the global rb-tree, use a list to manage the delayed nodes,
which is created for every directory and file, and used to manage the
delayed directory name index items and the delayed inode item.
- introduce a worker to deal with the delayed nodes.
Compare with Ext3/4, the performance of file creation and deletion on btrfs
is very poor. the reason is that btrfs must do a lot of b+ tree insertions,
such as inode item, directory name item, directory name index and so on.
If we can do some delayed b+ tree insertion or deletion, we can improve the
performance, so we made this patch which implemented delayed directory name
index insertion/deletion and delayed inode update.
Implementation:
- introduce a delayed root object into the filesystem, that use two lists to
manage the delayed nodes which are created for every file/directory.
One is used to manage all the delayed nodes that have delayed items. And the
other is used to manage the delayed nodes which is waiting to be dealt with
by the work thread.
- Every delayed node has two rb-tree, one is used to manage the directory name
index which is going to be inserted into b+ tree, and the other is used to
manage the directory name index which is going to be deleted from b+ tree.
- introduce a worker to deal with the delayed operation. This worker is used
to deal with the works of the delayed directory name index items insertion
and deletion and the delayed inode update.
When the delayed items is beyond the lower limit, we create works for some
delayed nodes and insert them into the work queue of the worker, and then
go back.
When the delayed items is beyond the upper bound, we create works for all
the delayed nodes that haven't been dealt with, and insert them into the work
queue of the worker, and then wait for that the untreated items is below some
threshold value.
- When we want to insert a directory name index into b+ tree, we just add the
information into the delayed inserting rb-tree.
And then we check the number of the delayed items and do delayed items
balance. (The balance policy is above.)
- When we want to delete a directory name index from the b+ tree, we search it
in the inserting rb-tree at first. If we look it up, just drop it. If not,
add the key of it into the delayed deleting rb-tree.
Similar to the delayed inserting rb-tree, we also check the number of the
delayed items and do delayed items balance.
(The same to inserting manipulation)
- When we want to update the metadata of some inode, we cached the data of the
inode into the delayed node. the worker will flush it into the b+ tree after
dealing with the delayed insertion and deletion.
- We will move the delayed node to the tail of the list after we access the
delayed node, By this way, we can cache more delayed items and merge more
inode updates.
- If we want to commit transaction, we will deal with all the delayed node.
- the delayed node will be freed when we free the btrfs inode.
- Before we log the inode items, we commit all the directory name index items
and the delayed inode update.
I did a quick test by the benchmark tool[1] and found we can improve the
performance of file creation by ~15%, and file deletion by ~20%.
Before applying this patch:
Create files:
Total files: 50000
Total time: 1.096108
Average time: 0.000022
Delete files:
Total files: 50000
Total time: 1.510403
Average time: 0.000030
After applying this patch:
Create files:
Total files: 50000
Total time: 0.932899
Average time: 0.000019
Delete files:
Total files: 50000
Total time: 1.215732
Average time: 0.000024
[1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3
Many thanks for Kitayama-san's help!
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-22 14:12:22 +04:00
struct btrfs_delayed_node * delayed_node ;
2012-07-04 11:18:07 +04:00
/* File creation time. */
struct timespec i_otime ;
2008-09-29 23:18:18 +04:00
struct inode vfs_inode ;
2007-04-02 18:50:19 +04:00
} ;
2008-07-17 20:54:05 +04:00
btrfs: implement delayed inode items operation
Changelog V5 -> V6:
- Fix oom when the memory load is high, by storing the delayed nodes into the
root's radix tree, and letting btrfs inodes go.
Changelog V4 -> V5:
- Fix the race on adding the delayed node to the inode, which is spotted by
Chris Mason.
- Merge Chris Mason's incremental patch into this patch.
- Fix deadlock between readdir() and memory fault, which is reported by
Itaru Kitayama.
Changelog V3 -> V4:
- Fix nested lock, which is reported by Itaru Kitayama, by updating space cache
inode in time.
Changelog V2 -> V3:
- Fix the race between the delayed worker and the task which does delayed items
balance, which is reported by Tsutomu Itoh.
- Modify the patch address David Sterba's comment.
- Fix the bug of the cpu recursion spinlock, reported by Chris Mason
Changelog V1 -> V2:
- break up the global rb-tree, use a list to manage the delayed nodes,
which is created for every directory and file, and used to manage the
delayed directory name index items and the delayed inode item.
- introduce a worker to deal with the delayed nodes.
Compare with Ext3/4, the performance of file creation and deletion on btrfs
is very poor. the reason is that btrfs must do a lot of b+ tree insertions,
such as inode item, directory name item, directory name index and so on.
If we can do some delayed b+ tree insertion or deletion, we can improve the
performance, so we made this patch which implemented delayed directory name
index insertion/deletion and delayed inode update.
Implementation:
- introduce a delayed root object into the filesystem, that use two lists to
manage the delayed nodes which are created for every file/directory.
One is used to manage all the delayed nodes that have delayed items. And the
other is used to manage the delayed nodes which is waiting to be dealt with
by the work thread.
- Every delayed node has two rb-tree, one is used to manage the directory name
index which is going to be inserted into b+ tree, and the other is used to
manage the directory name index which is going to be deleted from b+ tree.
- introduce a worker to deal with the delayed operation. This worker is used
to deal with the works of the delayed directory name index items insertion
and deletion and the delayed inode update.
When the delayed items is beyond the lower limit, we create works for some
delayed nodes and insert them into the work queue of the worker, and then
go back.
When the delayed items is beyond the upper bound, we create works for all
the delayed nodes that haven't been dealt with, and insert them into the work
queue of the worker, and then wait for that the untreated items is below some
threshold value.
- When we want to insert a directory name index into b+ tree, we just add the
information into the delayed inserting rb-tree.
And then we check the number of the delayed items and do delayed items
balance. (The balance policy is above.)
- When we want to delete a directory name index from the b+ tree, we search it
in the inserting rb-tree at first. If we look it up, just drop it. If not,
add the key of it into the delayed deleting rb-tree.
Similar to the delayed inserting rb-tree, we also check the number of the
delayed items and do delayed items balance.
(The same to inserting manipulation)
- When we want to update the metadata of some inode, we cached the data of the
inode into the delayed node. the worker will flush it into the b+ tree after
dealing with the delayed insertion and deletion.
- We will move the delayed node to the tail of the list after we access the
delayed node, By this way, we can cache more delayed items and merge more
inode updates.
- If we want to commit transaction, we will deal with all the delayed node.
- the delayed node will be freed when we free the btrfs inode.
- Before we log the inode items, we commit all the directory name index items
and the delayed inode update.
I did a quick test by the benchmark tool[1] and found we can improve the
performance of file creation by ~15%, and file deletion by ~20%.
Before applying this patch:
Create files:
Total files: 50000
Total time: 1.096108
Average time: 0.000022
Delete files:
Total files: 50000
Total time: 1.510403
Average time: 0.000030
After applying this patch:
Create files:
Total files: 50000
Total time: 0.932899
Average time: 0.000019
Delete files:
Total files: 50000
Total time: 1.215732
Average time: 0.000024
[1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3
Many thanks for Kitayama-san's help!
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-22 14:12:22 +04:00
extern unsigned char btrfs_filetype_table [ ] ;
2007-04-02 18:50:19 +04:00
static inline struct btrfs_inode * BTRFS_I ( struct inode * inode )
{
return container_of ( inode , struct btrfs_inode , vfs_inode ) ;
}
Btrfs: improve inode hash function/inode lookup
Currently the hash value used for adding an inode to the VFS's inode
hash table consists of the plain inode number, which is a 64 bits
integer. This results in hash table buckets (hlist_head lists) with
too many elements for at least 2 important scenarios:
1) When we have many subvolumes. Each subvolume has its own btree
where its files and directories are added to, and each has its
own objectid (inode number) namespace. This means that if we have
N subvolumes, and all have inode number X associated to a file or
directory, the corresponding inodes all map to the same hash table
entry, resulting in a bucket (hlist_head list) with N elements;
2) On 32 bits machines. Th VFS hash values are unsigned longs, which
are 32 bits wide on 32 bits machines, and the inode (objectid)
numbers are 64 bits unsigned integers. We simply cast the inode
numbers to hash values, which means that for all inodes with the
same 32 bits lower half, the same hash bucket is used for all of
them. For example, all inodes with a number (objectid) between
0x0000_0000_ffff_ffff and 0xffff_ffff_ffff_ffff will end up in
the same hash table bucket.
This change ensures the inode's hash value depends both on the
objectid (inode number) and its subvolume's (btree root) objectid.
For 32 bits machines, this change gives better entropy by making
the hash value depend on both the upper and lower 32 bits of the
64 bits hash previously computed.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-10-07 01:22:33 +04:00
static inline unsigned long btrfs_inode_hash ( u64 objectid ,
const struct btrfs_root * root )
{
u64 h = objectid ^ ( root - > objectid * GOLDEN_RATIO_PRIME ) ;
# if BITS_PER_LONG == 32
h = ( h > > 32 ) ^ ( h & 0xffffffff ) ;
# endif
return ( unsigned long ) h ;
}
static inline void btrfs_insert_inode_hash ( struct inode * inode )
{
unsigned long h = btrfs_inode_hash ( inode - > i_ino , BTRFS_I ( inode ) - > root ) ;
__insert_inode_hash ( inode , h ) ;
}
2011-04-20 06:31:50 +04:00
static inline u64 btrfs_ino ( struct inode * inode )
{
u64 ino = BTRFS_I ( inode ) - > location . objectid ;
2011-09-11 18:52:24 +04:00
/*
* ! ino : btree_inode
* type = = BTRFS_ROOT_ITEM_KEY : subvol dir
*/
if ( ! ino | | BTRFS_I ( inode ) - > location . type = = BTRFS_ROOT_ITEM_KEY )
2011-04-20 06:31:50 +04:00
ino = inode - > i_ino ;
return ino ;
}
2008-07-17 20:54:05 +04:00
static inline void btrfs_i_size_write ( struct inode * inode , u64 size )
{
2009-11-12 12:34:21 +03:00
i_size_write ( inode , size ) ;
2008-07-17 20:54:05 +04:00
BTRFS_I ( inode ) - > disk_i_size = size ;
}
2012-07-10 15:28:39 +04:00
static inline bool btrfs_is_free_space_inode ( struct inode * inode )
2011-07-26 23:35:09 +04:00
{
2012-07-10 15:28:39 +04:00
struct btrfs_root * root = BTRFS_I ( inode ) - > root ;
2012-07-10 15:28:38 +04:00
if ( root = = root - > fs_info - > tree_root & &
btrfs_ino ( inode ) ! = BTRFS_BTREE_INODE_OBJECTID )
return true ;
if ( BTRFS_I ( inode ) - > location . objectid = = BTRFS_FREE_INO_OBJECTID )
2011-07-26 23:35:09 +04:00
return true ;
return false ;
}
2012-05-30 00:57:49 +04:00
static inline int btrfs_inode_in_log ( struct inode * inode , u64 generation )
{
if ( BTRFS_I ( inode ) - > logged_trans = = generation & &
2013-09-11 17:55:42 +04:00
BTRFS_I ( inode ) - > last_sub_trans < =
BTRFS_I ( inode ) - > last_log_commit & &
BTRFS_I ( inode ) - > last_sub_trans < =
2014-09-12 00:22:14 +04:00
BTRFS_I ( inode ) - > root - > last_log_commit ) {
/*
* After a ranged fsync we might have left some extent maps
* ( that fall outside the fsync ' s range ) . So return false
* here if the list isn ' t empty , to make sure btrfs_log_inode ( )
* will be called and process those extent maps .
*/
smp_mb ( ) ;
if ( list_empty ( & BTRFS_I ( inode ) - > extent_tree . modified_extents ) )
return 1 ;
}
2012-08-29 11:07:55 +04:00
return 0 ;
2012-05-30 00:57:49 +04:00
}
2014-09-12 14:43:56 +04:00
# define BTRFS_DIO_ORIG_BIO_SUBMITTED 0x1
2013-07-25 15:22:34 +04:00
struct btrfs_dio_private {
struct inode * inode ;
2014-09-12 14:43:56 +04:00
unsigned long flags ;
2013-07-25 15:22:34 +04:00
u64 logical_offset ;
u64 disk_bytenr ;
u64 bytes ;
void * private ;
/* number of bios pending for this dio */
atomic_t pending_bios ;
/* IO errors */
int errors ;
/* orig_bio is our btrfs_io_bio */
struct bio * orig_bio ;
/* dio_bio came from fs/direct-io.c */
struct bio * dio_bio ;
2014-09-12 14:43:56 +04:00
/*
* The original bio may be splited to several sub - bios , this is
* done during endio of sub - bios
*/
2014-09-12 14:44:03 +04:00
int ( * subio_endio ) ( struct inode * , struct btrfs_io_bio * , int ) ;
2013-07-25 15:22:34 +04:00
} ;
2013-02-08 11:01:08 +04:00
/*
* Disable DIO read nolock optimization , so new dio readers will be forced
* to grab i_mutex . It is used to avoid the endless truncate due to
* nonlocked dio read .
*/
static inline void btrfs_inode_block_unlocked_dio ( struct inode * inode )
{
set_bit ( BTRFS_INODE_READDIO_NEED_LOCK , & BTRFS_I ( inode ) - > runtime_flags ) ;
smp_mb ( ) ;
}
static inline void btrfs_inode_resume_unlocked_dio ( struct inode * inode )
{
2014-03-17 21:06:10 +04:00
smp_mb__before_atomic ( ) ;
2013-02-08 11:01:08 +04:00
clear_bit ( BTRFS_INODE_READDIO_NEED_LOCK ,
& BTRFS_I ( inode ) - > runtime_flags ) ;
}
2014-05-21 00:07:56 +04:00
bool btrfs_page_exists_in_range ( struct inode * inode , loff_t start , loff_t end ) ;
2007-04-02 18:50:19 +04:00
# endif