iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

staging: iio: ad2s1210: Fix SPI reading

Browse Source 
commit 5e4f99a6b788047b0b8a7496c2e0c8f372f6edf2 upstream.

If the serial interface is used, the 8-bit address should be latched using
the rising edge of the WR/FSYNC signal.

This basically means that a CS change is required between the first byte
sent, and the second one.
This change splits the single-transfer transfer of 2 bytes into 2 transfers
with a single byte, and CS change in-between.

Note fixes tag is not accurate, but reflects a point beyond which there
are too many refactors to make backporting straight forward.

Fixes: b19e9ad5e2cb ("staging:iio:resolver:ad2s1210 general driver cleanup.")
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Dragos Bogdan 2020-04-29 10:21:29 +03:00 committed by Greg Kroah-Hartman
parent 33448dc952
commit 03e79b6c34
1 changed files with 12 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
drivers/staging/iio/resolver/ad2s1210.c
View File

@ -126,17 +126,24 @@ static int ad2s1210_config_write(struct ad2s1210_state *st, u8 data)
static int ad2s1210_config_read(struct ad2s1210_state *st,
unsigned char address)
{
struct spi_transfer xfer = {
.len = 2,
.rx_buf = st->rx,
.tx_buf = st->tx,
struct spi_transfer xfers[] = {
{
.len = 1,
.rx_buf = &st->rx[0],
.tx_buf = &st->tx[0],
.cs_change = 1,
}, {
.len = 1,
.rx_buf = &st->rx[1],
.tx_buf = &st->tx[1],
},
};
int ret = 0;
ad2s1210_set_mode(MOD_CONFIG, st);
st->tx[0] = address | AD2S1210_MSB_IS_HIGH;
st->tx[1] = AD2S1210_REG_FAULT;
ret = spi_sync_transfer(st->sdev, &xfer, 1);
ret = spi_sync_transfer(st->sdev, xfers, 2);
if (ret < 0)
return ret;
st->old_data = true;