iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

New boards are the Anberic RG351V handheld (rk3326), Theobroma Systems Jaguar

Browse Source 
SBC (rk3588), Powkiddy X55 and RK2023 handheld (rk3566), Edgeble-Neu6b (rk3588)
 
 The rk3588 got attention with one working usb3 host on Rock-5a/5b, Orangepi-5
 and audio for the EVB1.
 
 Some smaller improvements for the other socs (fifo-depths on rk3328,
 gpio-line-names on rk3308-rock-pi-s, gpu power-coefficients on rk3399,
 and a fix for the newly converted gpio-fan yaml binding).
 
 Also a number of aliases were moved. Always-numbered core busses can have their
 aliases in the soc dtsi, as is done in a number of cases already and other alises
 like ethernet really should be per board.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmV4x7sQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgYfVB/9F3SO2g4f+6dc2DOLLijx0EjNUc3+ZGJfJ
 lHGpRPPgXLpBWAuOBZnyPSEGbGg4f6tZhil6K0W7skhbuqU+LfPy6jjXvoormkZj
 xYfY3q/hacMkHqehwLLo7DXZO0aO8Thl8AQfYoV91q/29YVgol7fe4HWuAdyvur5
 HAtPBLuitRibwUnothVuFhEZVPdG0bnOr7gkWbY/MZGxLQt7tkT3HgBonczLxZwQ
 FU5FueLLhsI0b71TADJT674NLM2MBhhdz8Sc3Dh2sL2fhwaEt43f1Cco087dlgtu
 dThQ2hUurbedwZiAaeIQU64CcnorQhM41jIB7zlUGClvbtinG0RN
 =e2X2
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmWEXicACgkQYKtH/8kJ
 UicTaBAAo2z0px6n70ma8THCgZvDYFG05HPLkxKCYKkoonjgJ260pnnY0qinqnI7
 0GW3Dhu8IwUK2c6Pbmu7dftxJ9BRClbEOyWC/caQwpS+8QyJbAAo0jDLI9PBdJjv
 FucQIXBZAkT1KfCb02hxc8jPrSJwGiQPag0Z6IQ925LquXmFxOrIxDThkfdRhz0s
 yUv5Nabv5VqBx3kuwd4p0Vq/M5Eshs8WvsoN8QLu8eJvlER8KLTjRdksAATmL60A
 pJe3K22HG5LoFVb5jLblRRebHCtjTaQD47WNFm1OMKfGzYFXbDifyeDf81uK58pa
 HFR/IQEqCd4NySrkLA20dhGc266sWGyu2Wgo0gkG+sN+h1WiP+8zhMcRcTUq7C1g
 4HB32/UCid2nwtn4nsvKJamovMxk8weVvhcmdA4h3FfFTa/7aAaTUulvnijLEV7t
 wZPAJODWBUNC3vHQenFoWo88/ghvVMIgvMQWVWFmXiZ2Pzm/eqrBNgraX4gnYgGM
 Rd32WzYhbqKocj8IFL1TtWTOCNTZsXaDSj81TbfozSd0+sqCYKyRta1LPH8WOB8u
 A8MbdkPQJOGgClO0tQhoqtfRR6U4F23au2nXdxC9oa8ZEmq/etQDopJO9pKwm5Tr
 /xX/js0H6kP+nIJZYr8b1om3A7lQVuhWOLVJLlb4XbaBkW8wrNg=
 =m5zj
 -----END PGP SIGNATURE-----

Merge tag 'v6.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

New boards are the Anberic RG351V handheld (rk3326), Theobroma Systems Jaguar
SBC (rk3588), Powkiddy X55 and RK2023 handheld (rk3566), Edgeble-Neu6b (rk3588)

The rk3588 got attention with one working usb3 host on Rock-5a/5b, Orangepi-5
and audio for the EVB1.

Some smaller improvements for the other socs (fifo-depths on rk3328,
gpio-line-names on rk3308-rock-pi-s, gpu power-coefficients on rk3399,
and a fix for the newly converted gpio-fan yaml binding).

Also a number of aliases were moved. Always-numbered core busses can have their
aliases in the soc dtsi, as is done in a number of cases already and other alises
like ethernet really should be per board.

* tag 'v6.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits)
  arm64: dts: rockchip: Add Anbernic RG351V
  arm64: dts: rockchip: Split RG351M from Odroid Go Advance
  dt-bindings: arm: rockchip: Add Anbernic RG351V
  arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3588(S) boards
  arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3566 boards
  arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for PX30
  arm64: dts: rockchip: Remove ethernetX aliases from the SoC dtsi for RK3328
  arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3368
  arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3399
  arm64: dts: rockchip: make dts use gpio-fan matrix instead of array
  arm64: dts: rockchip: add gpio alias for gpio dt nodes
  arm64: dts: rockchip: Add dynamic-power-coefficient to rk3399 GPU
  arm64: dts: rockchip: add rk3588 spi aliases to soc dtsi
  arm64: dts: rockchip: add rk3588 gpio aliases to soc dtsi
  arm64: dts: rockchip: add rk3588 i2c aliases to soc dtsi
  arm64: dts: rockchip: move rk3588 serial aliases to soc dtsi
  arm64: dts: rockchip: add Theobroma Jaguar SBC
  dt-bindings: arm: rockchip: Add Theobroma-Systems Jaguar SBC
  arm64: dts: rockchip: Add Powkiddy X55
  dt-bindings: arm: rockchip: Add Powkiddy X55
  ...

Link: https://lore.kernel.org/r/3535836.iIbC2pHGDl@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2023-12-21 15:46:17 +00:00
commit 16e6e974d1
70 changed files with 3501 additions and 195 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
Documentation/devicetree/bindings/arm/rockchip.yaml
View File

@ -30,9 +30,11 @@ properties:
- const: amarula,vyasa-rk3288
- const: rockchip,rk3288
- description: Anbernic RG351M
- description: Anbernic RK3326 Handheld Gaming Console
items:
- const: anbernic,rg351m
- enum:
- anbernic,rg351m
- anbernic,rg351v
- const: rockchip,rk3326
- description: Anbernic RG353P
@ -101,16 +103,12 @@ properties:
- const: edgeble,neural-compute-module-2 # Edgeble Neural Compute Module 2 SoM
- const: rockchip,rv1126
- description: Edgeble Neural Compute Module 6(Neu6) Model A SoM based boards
- description: Edgeble Neural Compute Module 6(Neu6) SoM based boards
items:
- const: edgeble,neural-compute-module-6a-io # Edgeble Neural Compute Module 6A IO Board
- const: edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM
- const: rockchip,rk3588
- description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards
items:
- const: edgeble,neural-compute-module-6b-io # Edgeble Neural Compute Module 6B IO Board
- const: edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM
- const: edgeble,neural-compute-module-6a-io # Edgeble NCM6A-IO Board
- enum:
- edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM
- edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM
- const: rockchip,rk3588
- description: Elgin RV1108 R1
@ -674,9 +672,12 @@ properties:
- const: pine64,soquartz
- const: rockchip,rk3566
- description: Powkiddy RGB30
- description: Powkiddy RK3566 Handheld Gaming Console
items:
- const: powkiddy,rgb30
- enum:
- powkiddy,rgb30
- powkiddy,rk2023
- powkiddy,x55
- const: rockchip,rk3566
- description: Radxa Compute Module 3(CM3)
@ -875,6 +876,11 @@ properties:
- const: tsd,rk3399-puma-haikou
- const: rockchip,rk3399
- description: Theobroma Systems RK3588-SBC Jaguar
items:
- const: tsd,rk3588-jaguar
- const: rockchip,rk3588
- description: Tronsmart Orion R68 Meta
items:
- const: tronsmart,orion-r68-meta

4
arch/arm64/boot/dts/rockchip/Makefile
View File

@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
@ -78,6 +79,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
@ -101,6 +104,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb

1
arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
View File

@ -7,6 +7,7 @@
/ {
aliases {
ethernet0 = &gmac;
mmc1 = &sdmmc;
mmc2 = &sdio;
};

1
arch/arm64/boot/dts/rockchip/px30-evb.dts
View File

@ -14,6 +14,7 @@
compatible = "rockchip,px30-evb", "rockchip,px30";
aliases {
ethernet0 = &gmac;
mmc0 = &sdmmc;
mmc1 = &sdio;
mmc2 = &emmc;

1
arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
View File

@ -13,6 +13,7 @@
compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
aliases {
ethernet0 = &gmac;
mmc2 = &sdmmc;
};

1
arch/arm64/boot/dts/rockchip/px30.dtsi
View File

@ -20,7 +20,6 @@
#size-cells = <2>;
aliases {
ethernet0 = &gmac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;

58
arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
View File

@ -250,3 +250,61 @@
&wdt {
status = "okay";
};
&gpio0 {
gpio-line-names =
/* GPIO0_A0 - A7 */
"", "", "", "", "", "", "", "",
/* GPIO0_B0 - B7 */
"", "", "", "header1-pin3 [GPIO0_B3]", "header1-pin5 [GPIO0_B4]",
"", "", "header1-pin11 [GPIO0_B7]",
/* GPIO0_C0 - C7 */
"header1-pin13 [GPIO0_C0]", "header1-pin15 [GPIO0_C1]", "", "", "",
"", "", "",
/* GPIO0_D0 - D8 */
"", "", "", "", "", "", "", "";
};
&gpio1 {
gpio-line-names =
/* GPIO1_A0 - A7 */
"", "", "", "", "", "", "", "",
/* GPIO1_B0 - B7 */
"", "", "", "", "", "", "", "",
/* GPIO1_C0 - C7 */
"", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
"header1-pin19 [GPIO1_C7]",
/* GPIO1_D0 - D8 */
"header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]", "", "", "",
"", "", "";
};
&gpio2 {
gpio-line-names =
/* GPIO2_A0 - A7 */
"header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]", "", "",
"header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
"header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
/* GPIO2_B0 - B7 */
"header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
"header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
"header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
"header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
/* GPIO2_C0 - C7 */
"header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
/* GPIO2_D0 - D8 */
"", "", "", "", "", "", "", "";
};
&gpio3 {
gpio-line-names =
/* GPIO3_A0 - A7 */
"", "", "", "", "", "", "", "",
/* GPIO3_B0 - B7 */
"", "", "header2-pin42 [GPIO3_B2]", "header2-pin41 [GPIO3_B3]",
"header2-pin40 [GPIO3_B4]", "header2-pin39 [GPIO3_B5]", "", "",
/* GPIO3_C0 - C7 */
"", "", "", "", "", "", "", "",
/* GPIO3_D0 - D8 */
"", "", "", "", "", "", "", "";
};

5
arch/arm64/boot/dts/rockchip/rk3308.dtsi
View File

@ -20,6 +20,11 @@
#size-cells = <2>;
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;

1
arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
View File

@ -9,6 +9,7 @@
compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
aliases {
ethernet0 = &gmac2phy;
mmc0 = &sdmmc;
mmc1 = &sdio;
mmc2 = &emmc;

18
arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
View File

@ -6,30 +6,16 @@
*/
/dts-v1/;
#include "rk3326-odroid-go.dtsi"
#include "rk3326-anbernic-rg351m.dtsi"
/ {
model = "Anbernic RG351M";
compatible = "anbernic,rg351m", "rockchip,rk3326";
vibrator {
compatible = "pwm-vibrator";
pwms = <&pwm0 0 1000000 0>;
pwm-names = "enable";
};
};
/delete-node/ &builtin_gamepad;
/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
&internal_display {
compatible = "elida,kd35t133";
iovcc-supply = <&vcc_lcd>;
rotation = <270>;
vdd-supply = <&vcc_lcd>;
};
&pwm0 {
status = "okay";
};
/delete-node/ &rk817_charger;

478
arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi Normal file
View File

@ -0,0 +1,478 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Hardkernel Co., Ltd
* Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
* Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3326.dtsi"
/ {
aliases {
mmc0 = &sdmmc;
};
chosen {
stdout-path = "serial2:115200n8";
};
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&vcc_bl>;
pwms = <&pwm1 0 25000 0>;
};
/*
* LED is a tri-state. Driven high it is red, driven low it is
* green, and not driven at all (pin set to input) it is amber.
* Additionally, there is a 2nd LED that is not controllable
* that is on (red) when plugged in to power.
*/
gpio_led: gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pin>;
red_green_led: led-0 {
color = <LED_COLOR_ID_RED>;
gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_CHARGING;
};
};
rk817-sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rk817_int";
simple-audio-card,format = "i2s";
simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Headphone", "Headphones",
"Speaker", "Speaker";
simple-audio-card,routing =
"MICL", "Mic Jack",
"Headphones", "HPOL",
"Headphones", "HPOR",
"Speaker", "SPKO";
simple-audio-card,codec {
sound-dai = <&rk817>;
};
simple-audio-card,cpu {
sound-dai = <&i2s1_2ch>;
};
};
vccsys: vccsys {
compatible = "regulator-fixed";
regulator-name = "vcc3v8_sys";
regulator-always-on;
regulator-min-microvolt = <3800000>;
regulator-max-microvolt = <3800000>;
};
vibrator {
compatible = "pwm-vibrator";
pwms = <&pwm0 0 1000000 0>;
pwm-names = "enable";
};
};
&cpu0 {
cpu-supply = <&vdd_arm>;
};
&cpu1 {
cpu-supply = <&vdd_arm>;
};
&cpu2 {
cpu-supply = <&vdd_arm>;
};
&cpu3 {
cpu-supply = <&vdd_arm>;
};
&cru {
assigned-clocks = <&cru PLL_NPLL>,
<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
assigned-clock-rates = <1188000000>,
<200000000>, <200000000>,
<150000000>, <150000000>,
<100000000>, <200000000>;
};
&display_subsystem {
status = "okay";
};
&dsi {
status = "okay";
ports {
mipi_out: port@1 {
reg = <1>;
mipi_out_panel: endpoint {
remote-endpoint = <&mipi_in_panel>;
};
};
};
internal_display: panel@0 {
reg = <0>;
backlight = <&backlight>;
reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
port {
mipi_in_panel: endpoint {
remote-endpoint = <&mipi_out_panel>;
};
};
};
};
&dsi_dphy {
status = "okay";
};
&gpu {
mali-supply = <&vdd_logic>;
status = "okay";
};
&i2c0 {
clock-frequency = <400000>;
i2c-scl-falling-time-ns = <16>;
i2c-scl-rising-time-ns = <280>;
status = "okay";
rk817: pmic@20 {
compatible = "rockchip,rk817";
reg = <0x20>;
#clock-cells = <1>;
clock-names = "mclk";
clock-output-names = "rk808-clkout1", "xin32k";
clocks = <&cru SCLK_I2S1_OUT>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
pinctrl-names = "default";
#sound-dai-cells = <0>;
wakeup-source;
vcc1-supply = <&vccsys>;
vcc2-supply = <&vccsys>;
vcc3-supply = <&vccsys>;
vcc4-supply = <&vccsys>;
vcc5-supply = <&vccsys>;
vcc6-supply = <&vccsys>;
vcc7-supply = <&vccsys>;
vcc8-supply = <&vccsys>;
regulators {
vdd_logic: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <1150000>;
regulator-min-microvolt = <950000>;
regulator-name = "vdd_logic";
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vdd_arm: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <1350000>;
regulator-min-microvolt = <950000>;
regulator-name = "vdd_arm";
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_3v3: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc_3v3";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_1v8: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
regulator-name = "vcc_1v8";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_1v0: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <1000000>;
regulator-min-microvolt = <1000000>;
regulator-name = "vdd_1v0";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc3v3_pmu: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc3v3_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1800000>;
regulator-name = "vccio_sd";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_sd: LDO_REG6 {
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc_sd";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_bl: LDO_REG7 {
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc_bl";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_lcd: LDO_REG8 {
regulator-max-microvolt = <2800000>;
regulator-min-microvolt = <2800000>;
regulator-name = "vcc_lcd";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <2800000>;
};
};
vcc_wifi: LDO_REG9 {
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc_wifi";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
usb_midu: BOOST {
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <5400000>;
regulator-min-microvolt = <5000000>;
regulator-name = "usb_midu";
};
};
rk817_codec: codec {
rockchip,mic-in-differential;
};
};
};
&i2s1_2ch {
status = "okay";
};
&io_domains {
vccio1-supply = <&vcc_3v3>;
vccio2-supply = <&vccio_sd>;
vccio3-supply = <&vcc_3v3>;
vccio4-supply = <&vcc_3v3>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_3v3>;
status = "okay";
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
status = "okay";
};
&pwm0 {
status = "okay";
};
&pwm1 {
status = "okay";
};
&saradc {
vref-supply = <&vcc_1v8>;
status = "okay";
};
&sdmmc {
cap-sd-highspeed;
card-detect-delay = <200>;
cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sfc {
#address-cells = <1>;
pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
pinctrl-names = "default";
#size-cells = <0>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <108000000>;
spi-rx-bus-width = <2>;
spi-tx-bus-width = <1>;
};
};
&tsadc {
status = "okay";
};
&u2phy {
status = "okay";
u2phy_host: host-port {
status = "okay";
};
u2phy_otg: otg-port {
status = "disabled";
};
};
&usb20_otg {
status = "okay";
};
&uart2 {
pinctrl-0 = <&uart2m1_xfer>;
pinctrl-names = "default";
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&pinctrl {
headphone {
hp_det: hp-det {
rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
leds {
led_pin: led-pin {
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dc_det: dc-det {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
pmic_int: pmic-int {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
soc_slppin_gpio: soc_slppin_gpio {
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
};
soc_slppin_rst: soc_slppin_rst {
rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
};
soc_slppin_slp: soc_slppin_slp {
rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
};
};
};

44
arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts Normal file
View File

@ -0,0 +1,44 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include "rk3326-anbernic-rg351m.dtsi"
/ {
model = "Anbernic RG351V";
compatible = "anbernic,rg351v", "rockchip,rk3326";
gpio_keys_vol: gpio-keys-vol {
compatible = "gpio-keys";
autorepeat;
button-vol-down {
gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
label = "VOLUMEDOWN";
linux,code = <KEY_VOLUMEDOWN>;
};
button-vol-up {
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
label = "VOLUMEUP";
linux,code = <KEY_VOLUMEUP>;
};
};
};
&internal_display {
compatible = "anbernic,rg351v-panel", "newvision,nv3051d";
vdd-supply = <&vcc_lcd>;
};
&io_domains {
vccio1-supply = <&vccio_sd>;
};
&vcc_sd {
regulator-max-microvolt = <3000000>;
regulator-min-microvolt = <1800000>;
};
&vccio_sd {
regulator-max-microvolt = <1800000>;
};

1
arch/arm64/boot/dts/rockchip/rk3328-a1.dts
View File

@ -9,6 +9,7 @@
compatible = "azw,beelink-a1", "rockchip,rk3328";
aliases {
ethernet0 = &gmac2io;
mmc0 = &sdmmc;
mmc1 = &emmc;
};

1
arch/arm64/boot/dts/rockchip/rk3328-evb.dts
View File

@ -11,6 +11,7 @@
compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
aliases {
ethernet0 = &gmac2phy;
mmc0 = &sdmmc;
mmc1 = &sdio;
mmc2 = &emmc;

1
arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
View File

@ -14,6 +14,7 @@
compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
aliases {
ethernet0 = &gmac2io;
ethernet1 = &rtl8153;
mmc0 = &sdmmc;
};

1
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
View File

@ -15,6 +15,7 @@
compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
aliases {
ethernet0 = &gmac2io;
ethernet1 = &rtl8153;
mmc0 = &sdmmc;
};

1
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
View File

@ -11,6 +11,7 @@
compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
aliases {
ethernet0 = &gmac2io;
mmc0 = &sdmmc;
mmc1 = &emmc;
};

2
arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
View File

@ -21,6 +21,8 @@
compatible = "radxa,rockpi-e", "rockchip,rk3328";
aliases {
ethernet0 = &gmac2io;
ethernet1 = &gmac2phy;
mmc0 = &sdmmc;
mmc1 = &emmc;
};

1
arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
View File

@ -11,6 +11,7 @@
compatible = "pine64,rock64", "rockchip,rk3328";
aliases {
ethernet0 = &gmac2io;
mmc0 = &sdmmc;
mmc1 = &emmc;
};

10
arch/arm64/boot/dts/rockchip/rk3328.dtsi
View File

@ -20,6 +20,10 @@
#size-cells = <2>;
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@ -27,8 +31,6 @@
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
ethernet0 = &gmac2io;
ethernet1 = &gmac2phy;
};
cpus {
@ -916,6 +918,8 @@
resets = <&cru SRST_GMAC2IO_A>;
reset-names = "stmmaceth";
rockchip,grf = <&grf>;
tx-fifo-depth = <2048>;
rx-fifo-depth = <4096>;
snps,txpbl = <0x4>;
status = "disabled";
};
@ -938,6 +942,8 @@
reset-names = "stmmaceth";
phy-mode = "rmii";
phy-handle = <&phy>;
tx-fifo-depth = <2048>;
rx-fifo-depth = <4096>;
snps,txpbl = <0x4>;
clock_in_out = "output";
status = "disabled";

1
arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
View File

@ -9,6 +9,7 @@
/ {
aliases {
ethernet0 = &gmac;
mmc0 = &emmc;
};

1
arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
View File

@ -12,6 +12,7 @@
compatible = "geekbuying,geekbox", "rockchip,rk3368";
aliases {
ethernet0 = &gmac;
mmc0 = &emmc;
};

1
arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
View File

@ -8,6 +8,7 @@
/ {
aliases {
ethernet0 = &gmac;
mmc0 = &emmc;
};

1
arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
View File

@ -12,6 +12,7 @@
compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
aliases {
ethernet0 = &gmac;
mmc0 = &sdmmc;
mmc1 = &emmc;
};

1
arch/arm64/boot/dts/rockchip/rk3368-r88.dts
View File

@ -12,6 +12,7 @@
compatible = "rockchip,r88", "rockchip,rk3368";
aliases {
ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &emmc;
};

5
arch/arm64/boot/dts/rockchip/rk3368.dtsi
View File

@ -19,7 +19,10 @@
#size-cells = <2>;
aliases {
ethernet0 = &gmac;
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;

1
arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
View File

@ -15,6 +15,7 @@
compatible = "openailab,eaidk-610", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;

1
arch/arm64/boot/dts/rockchip/rk3399-evb.dts
View File

@ -12,6 +12,7 @@
compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
mmc0 = &sdhci;
};

4
arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
View File

@ -13,6 +13,10 @@
model = "96boards RK3399 Ficus";
compatible = "vamrs,ficus", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
};
chosen {
stdout-path = "serial2:1500000n8";
};

1
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
View File

@ -16,6 +16,7 @@
compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;

1
arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
View File

@ -11,6 +11,7 @@
compatible = "hugsun,x99", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;

4
arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
View File

@ -10,6 +10,10 @@
/ {
model = "Khadas Edge-Captain";
compatible = "khadas,edge-captain", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
};
};
&gmac {

4
arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
View File

@ -10,6 +10,10 @@
/ {
model = "Khadas Edge-V";
compatible = "khadas,edge-v", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
};
};
&gmac {

1
arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
View File

@ -19,6 +19,7 @@
compatible = "kobol,helios64", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
mmc0 = &sdmmc;
mmc1 = &sdhci;
spi1 = &spi1;

1
arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
View File

@ -15,6 +15,7 @@
compatible = "leez,p710", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;

1
arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
View File

@ -18,6 +18,7 @@
/ {
aliases {
ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;

1
arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
View File

@ -17,6 +17,7 @@
compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;

1
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
View File

@ -9,6 +9,7 @@
/ {
aliases {
ethernet0 = &gmac;
mmc0 = &sdhci;
};

1
arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
View File

@ -14,6 +14,7 @@
compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
mmc0 = &sdmmc;
mmc1 = &sdhci;
};

1
arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
View File

@ -15,6 +15,7 @@
compatible = "radxa,rock-4c-plus", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
mmc0 = &sdhci;
mmc1 = &sdmmc;
};

1
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
View File

@ -12,6 +12,7 @@
/ {
aliases {
ethernet0 = &gmac;
mmc0 = &sdhci;
mmc1 = &sdmmc;
};

1
arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
View File

@ -11,6 +11,7 @@
/ {
aliases {
ethernet0 = &gmac;
mmc0 = &sdio0;
mmc1 = &sdmmc;
mmc2 = &sdhci;

3
arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
View File

@ -12,6 +12,7 @@
compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
aliases {
ethernet0 = &gmac;
mmc0 = &sdmmc;
mmc1 = &sdhci;
};
@ -44,7 +45,7 @@
fan0: gpio-fan {
#cooling-cells = <2>;
compatible = "gpio-fan";
gpio-fan,speed-map = <0 0 3000 1>;
gpio-fan,speed-map = <0 0>, <3000 1>;
gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
status = "okay";
};

7
arch/arm64/boot/dts/rockchip/rk3399.dtsi
View File

@ -19,7 +19,11 @@
#size-cells = <2>;
aliases {
ethernet0 = &gmac;
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
@ -2112,6 +2116,7 @@
interrupt-names = "job", "mmu", "gpu";
clocks = <&cru ACLK_GPU>;
#cooling-cells = <2>;
dynamic-power-coefficient = <2640>;
power-domains = <&power RK3399_PD_GPU>;
status = "disabled";
};

1
arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
View File

@ -13,6 +13,7 @@
compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
aliases {
ethernet0 = &gmac;
mmc0 = &sdhci;
mmc1 = &sdmmc;
};

152
arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
View File

@ -5,67 +5,11 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3566-anbernic-rg353x.dtsi"
#include "rk3566-powkiddy-rk2023.dtsi"
/ {
model = "RGB30";
compatible = "powkiddy,rgb30", "rockchip,rk3566";
aliases {
mmc1 = &sdmmc0;
mmc2 = &sdmmc1;
mmc3 = &sdmmc2;
};
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <3151000>;
charge-term-current-microamp = <300000>;
constant-charge-current-max-microamp = <2000000>;
constant-charge-voltage-max-microvolt = <4250000>;
factory-internal-resistance-micro-ohms = <117000>;
voltage-max-design-microvolt = <4172000>;
voltage-min-design-microvolt = <3400000>;
ocv-capacity-celsius = <20>;
ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
<3400000 0>;
};
/*
* Channels reversed for speakers. Headphones automatically switch via hardware when
* detected with no ability to control output in software. Headphones appear to be mono
* (each output channel receives all audio). No microphone support on 3.5mm jack.
*/
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rk817_ext";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Headphone", "Headphones";
simple-audio-card,routing =
"Headphones", "HPOL",
"Headphones", "HPOR";
simple-audio-card,codec {
sound-dai = <&rk817>;
};
simple-audio-card,cpu {
sound-dai = <&i2s1_8ch>;
};
};
};
/delete-node/ &adc_keys;
&chosen {
/delete-property/ stdout-path;
};
&cru {
@ -75,87 +19,21 @@
<200000000>, <292500000>;
};
&gpio_keys_control {
button-r1 {
gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
label = "TR";
linux,code = <BTN_TR>;
};
&dsi0 {
panel: panel@0 {
compatible = "powkiddy,rgb30-panel";
reg = <0>;
backlight = <&backlight>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_rst>;
reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
vcc-supply = <&vcc3v3_lcd0_n>;
iovcc-supply = <&vcc3v3_lcd0_n>;
button-r2 {
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
label = "TR2";
linux,code = <BTN_TR2>;
};
};
/delete-node/ &{/i2c@fdd40000/regulator@40};
&i2c0 {
vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";
reg = <0x1c>;
fcs,suspend-voltage-selector = <1>;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1390000>;
regulator-name = "vdd_cpu";
regulator-ramp-delay = <2300>;
vin-supply = <&vcc_sys>;
regulator-state-mem {
regulator-off-in-suspend;
port {
mipi_in_panel: endpoint {
remote-endpoint = <&mipi_out_panel>;
};
};
};
};
/*
* Device has 2 red LEDs instead of an amber and a red. Relabel LEDs as
* red_led0 and red_led1.
*/
/delete-node/ &{/pwm-leds/led-1};
/delete-node/ &{/pwm-leds/led-2};
&leds {
red_led0: led-1 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_CHARGING;
max-brightness = <255>;
pwms = <&pwm7 0 25000 0>;
};
red_led1: led-2 {
color = <LED_COLOR_ID_RED>;
default-state = "off";
function = LED_FUNCTION_STATUS;
max-brightness = <255>;
pwms = <&pwm0 0 25000 0>;
};
};
&panel {
compatible = "powkiddy,rgb30-panel";
vcc-supply = <&vcc3v3_lcd0_n>;
iovcc-supply = <&vcc3v3_lcd0_n>;
/delete-property/ vdd-supply;
};
&pwm5 {
status = "disabled";
};
&rk817 {
rk817_charger: charger {
monitored-battery = <&battery>;
rockchip,resistor-sense-micro-ohms = <10000>;
rockchip,sleep-enter-current-microamp = <300000>;
rockchip,sleep-filter-current-microamp = <100000>;
};
};
/* There is no UART header visible on the board for this device. */
&uart2 {
status = "disabled";
};
/delete-node/ &vibrator;

38
arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts Normal file
View File

@ -0,0 +1,38 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3566-powkiddy-rk2023.dtsi"
/ {
model = "RK2023";
compatible = "powkiddy,rk2023", "rockchip,rk3566";
};
&cru {
assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
<&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
assigned-clock-rates = <32768>, <1200000000>,
<200000000>, <115200000>;
};
&dsi0 {
panel: panel@0 {
compatible = "powkiddy,rk2023-panel", "newvision,nv3051d";
reg = <0>;
backlight = <&backlight>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_rst>;
reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
vdd-supply = <&vcc3v3_lcd0_n>;
port {
mipi_in_panel: endpoint {
remote-endpoint = <&mipi_out_panel>;
};
};
};
};

875
arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi Normal file
View File

@ -0,0 +1,875 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3566.dtsi"
/ {
aliases {
mmc1 = &sdmmc0;
mmc2 = &sdmmc1;
mmc3 = &sdmmc2;
};
adc-joystick {
compatible = "adc-joystick";
io-channels = <&adc_mux 0>,
<&adc_mux 1>,
<&adc_mux 2>,
<&adc_mux 3>;
pinctrl-0 = <&joy_mux_en>;
pinctrl-names = "default";
poll-interval = <60>;
#address-cells = <1>;
#size-cells = <0>;
axis@0 {
reg = <0>;
abs-flat = <32>;
abs-fuzz = <32>;
abs-range = <1023 15>;
linux,code = <ABS_X>;
};
axis@1 {
reg = <1>;
abs-flat = <32>;
abs-fuzz = <32>;
abs-range = <15 1023>;
linux,code = <ABS_RX>;
};
axis@2 {
reg = <2>;
abs-flat = <32>;
abs-fuzz = <32>;
abs-range = <15 1023>;
linux,code = <ABS_Y>;
};
axis@3 {
reg = <3>;
abs-flat = <32>;
abs-fuzz = <32>;
abs-range = <1023 15>;
linux,code = <ABS_RY>;
};
};
adc_mux: adc-mux {
compatible = "io-channel-mux";
channels = "left_x", "right_x", "left_y", "right_y";
#io-channel-cells = <1>;
io-channels = <&saradc 3>;
io-channel-names = "parent";
mux-controls = <&gpio_mux>;
settle-time-us = <100>;
};
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&vcc_sys>;
pwms = <&pwm4 0 25000 0>;
};
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <3151000>;
charge-term-current-microamp = <300000>;
constant-charge-current-max-microamp = <2000000>;
constant-charge-voltage-max-microvolt = <4250000>;
factory-internal-resistance-micro-ohms = <117000>;
voltage-max-design-microvolt = <4172000>;
voltage-min-design-microvolt = <3400000>;
ocv-capacity-celsius = <20>;
ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
<3400000 0>;
};
gpio_keys_control: gpio-keys-control {
compatible = "gpio-keys";
pinctrl-0 = <&btn_pins_ctrl>;
pinctrl-names = "default";
button-a {
gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
label = "EAST";
linux,code = <BTN_EAST>;
};
button-b {
gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
label = "SOUTH";
linux,code = <BTN_SOUTH>;
};
button-down {
gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
label = "DPAD-DOWN";
linux,code = <BTN_DPAD_DOWN>;
};
button-l1 {
gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
label = "TL";
linux,code = <BTN_TL>;
};
button-l2 {
gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
label = "TL2";
linux,code = <BTN_TL2>;
};
button-left {
gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
label = "DPAD-LEFT";
linux,code = <BTN_DPAD_LEFT>;
};
button-r1 {
gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
label = "TR";
linux,code = <BTN_TR>;
};
button-r2 {
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
label = "TR2";
linux,code = <BTN_TR2>;
};
button-right {
gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
label = "DPAD-RIGHT";
linux,code = <BTN_DPAD_RIGHT>;
};
button-select {
gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
label = "SELECT";
linux,code = <BTN_SELECT>;
};
button-start {
gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
label = "START";
linux,code = <BTN_START>;
};
button-thumbl {
gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
label = "THUMBL";
linux,code = <BTN_THUMBL>;
};
button-thumbr {
gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
label = "THUMBR";
linux,code = <BTN_THUMBR>;
};
button-up {
gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
label = "DPAD-UP";
linux,code = <BTN_DPAD_UP>;
};
button-x {
gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
label = "NORTH";
linux,code = <BTN_NORTH>;
};
button-y {
gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
label = "WEST";
linux,code = <BTN_WEST>;
};
};
gpio_keys_vol: gpio-keys-vol {
compatible = "gpio-keys";
autorepeat;
pinctrl-0 = <&btn_pins_vol>;
pinctrl-names = "default";
button-vol-down {
gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
label = "VOLUMEDOWN";
linux,code = <KEY_VOLUMEDOWN>;
};
button-vol-up {
gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
label = "VOLUMEUP";
linux,code = <KEY_VOLUMEUP>;
};
};
gpio_mux: mux-controller {
compatible = "gpio-mux";
mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
<&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
#mux-control-cells = <0>;
};
hdmi-con {
compatible = "hdmi-connector";
ddc-i2c-bus = <&i2c5>;
type = "c";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
/*
* Device also includes an always on LED that is wired to the 5V input
* voltage and is on when the device is plugged in.
*/
leds: pwm-leds {
compatible = "pwm-leds";
green_led: led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
max-brightness = <255>;
pwms = <&pwm6 0 25000 0>;
};
red_led: led-1 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_CHARGING;
max-brightness = <255>;
pwms = <&pwm7 0 25000 0>;
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk817 1>;
clock-names = "ext_clock";
pinctrl-0 = <&wifi_enable_h>;
pinctrl-names = "default";
post-power-on-delay-ms = <200>;
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
};
/*
* Channels reversed for speakers. Headphones automatically switch via hardware when
* detected with no ability to control output in software. Headphones appear to be mono
* (each output channel receives all audio). No microphone support on 3.5mm jack.
*/
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rk817_ext";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Headphone", "Headphones";
simple-audio-card,routing =
"Headphones", "HPOL",
"Headphones", "HPOR";
simple-audio-card,codec {
sound-dai = <&rk817>;
};
simple-audio-card,cpu {
sound-dai = <&i2s1_8ch>;
};
};
vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&vcc_lcd_h>;
pinctrl-names = "default";
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_lcd0_n";
vin-supply = <&vcc_3v3>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_sys: regulator-vcc-sys {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3800000>;
regulator-max-microvolt = <3800000>;
regulator-name = "vcc_sys";
};
vcc_wifi: regulator-vcc-wifi {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc_wifi_h>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_wifi";
};
};
&combphy1 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&dsi0 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
ports {
dsi0_in: port@0 {
reg = <0>;
dsi0_in_vp1: endpoint {
remote-endpoint = <&vp1_out_dsi0>;
};
};
dsi0_out: port@1 {
reg = <1>;
mipi_out_panel: endpoint {
remote-endpoint = <&mipi_in_panel>;
};
};
};
};
&dsi_dphy0 {
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c5>;
pinctrl-0 = <&hdmitxm0_cec>;
pinctrl-names = "default";
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
rk817: pmic@20 {
compatible = "rockchip,rk817";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
clock-output-names = "rk808-clkout1", "rk808-clkout2";
clock-names = "mclk";
clocks = <&cru I2S1_MCLKOUT_TX>;
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
#clock-cells = <1>;
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
wakeup-source;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc5-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc_sys>;
vcc9-supply = <&dcdc_boost>;
regulators {
vdd_logic: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_logic";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_gpu";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_3v3: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_3v3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca1v8_pmu: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdda_0v9: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda_0v9";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_acodec";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_1v8: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_dvp: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc1v8_dvp";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc2v8_dvp: LDO_REG9 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vcc2v8_dvp";
regulator-state-mem {
regulator-off-in-suspend;
};
};
dcdc_boost: BOOST {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <4700000>;
regulator-max-microvolt = <5400000>;
regulator-name = "boost";
regulator-state-mem {
regulator-off-in-suspend;
};
};
otg_switch: OTG_SWITCH {
regulator-name = "otg_switch";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
rk817_charger: charger {
monitored-battery = <&battery>;
rockchip,resistor-sense-micro-ohms = <10000>;
rockchip,sleep-enter-current-microamp = <300000>;
rockchip,sleep-filter-current-microamp = <100000>;
};
};
vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";
reg = <0x1c>;
fcs,suspend-voltage-selector = <1>;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1390000>;
regulator-name = "vdd_cpu";
regulator-ramp-delay = <2300>;
vin-supply = <&vcc_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c5 {
pinctrl-0 = <&i2c5m1_xfer>;
pinctrl-names = "default";
status = "okay";
};
&i2s0_8ch {
status = "okay";
};
&i2s1_8ch {
pinctrl-0 = <&i2s1m0_sclktx
&i2s1m0_lrcktx
&i2s1m0_sdi0
&i2s1m0_sdo0>;
pinctrl-names = "default";
rockchip,trcm-sync-tx-only;
status = "okay";
};
&pinctrl {
gpio-btns {
btn_pins_ctrl: btn-pins-ctrl {
rockchip,pins =
<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
};
btn_pins_vol: btn-pins-vol {
rockchip,pins =
<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
joy-mux {
joy_mux_en: joy-mux-en {
rockchip,pins =
<0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
};
};
gpio-lcd {
lcd_rst: lcd-rst {
rockchip,pins =
<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins =
<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
vcc3v3-lcd {
vcc_lcd_h: vcc-lcd-h {
rockchip,pins =
<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
vcc-wifi {
vcc_wifi_h: vcc-wifi-h {
rockchip,pins =
<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pmu_io_domains {
status = "okay";
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc1v8_dvp>;
vccio7-supply = <&vcc_3v3>;
};
&pwm4 {
status = "okay";
};
&pwm6 {
status = "okay";
};
&pwm7 {
status = "okay";
};
&saradc {
vref-supply = <&vcc_1v8>;
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
pinctrl-names = "default";
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sdmmc1 {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
pinctrl-names = "default";
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc1v8_dvp>;
status = "okay";
};
&sdmmc2 {
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
pinctrl-names = "default";
vmmc-supply = <&vcc_wifi>;
vqmmc-supply = <&vcca1v8_pmu>;
status = "okay";
};
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&uart1 {
pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
pinctrl-names = "default";
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
};
};
&usb_host0_xhci {
dr_mode = "peripheral";
phys = <&usb2phy0_otg>;
phy-names = "usb2-phy";
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host1_xhci {
phy-names = "usb2-phy", "usb3-phy";
phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_otg {
status = "okay";
};
&usb2phy1 {
status = "okay";
};
&usb2phy1_host {
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};
&vp1 {
vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
reg = <ROCKCHIP_VOP2_EP_MIPI0>;
remote-endpoint = <&dsi0_in_vp1>;
};
};

926
arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts Normal file
View File

@ -0,0 +1,926 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3566.dtsi"
/ {
model = "Powkiddy x55";
compatible = "powkiddy,x55", "rockchip,rk3566";
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc0;
mmc2 = &sdmmc2;
mmc3 = &sdmmc1;
};
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
adc_joystick: adc-joystick {
compatible = "adc-joystick";
io-channels = <&saradc 0>, <&saradc 1>,
<&saradc 2>, <&saradc 3>;
poll-interval = <60>;
#address-cells = <1>;
#size-cells = <0>;
axis@0 {
reg = <0>;
abs-flat = <30>;
abs-fuzz = <20>;
abs-range = <15 1023>;
linux,code = <ABS_X>;
};
axis@1 {
reg = <1>;
abs-flat = <30>;
abs-fuzz = <20>;
abs-range = <1023 15>;
linux,code = <ABS_Y>;
};
axis@2 {
reg = <2>;
abs-flat = <30>;
abs-fuzz = <20>;
abs-range = <15 1023>;
linux,code = <ABS_RX>;
};
axis@3 {
reg = <3>;
abs-flat = <30>;
abs-fuzz = <20>;
abs-range = <1023 15>;
linux,code = <ABS_RY>;
};
};
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&vcc_sys>;
pwms = <&pwm4 0 25000 0>;
};
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <4000000>;
charge-term-current-microamp = <300000>;
constant-charge-current-max-microamp = <2000000>;
constant-charge-voltage-max-microvolt = <4300000>;
factory-internal-resistance-micro-ohms = <91000>;
voltage-max-design-microvolt = <4138000>;
voltage-min-design-microvolt = <3400000>;
ocv-capacity-celsius = <20>;
ocv-capacity-table-0 = <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>,
<4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>,
<3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>,
<3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>,
<3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>,
<3400000 0>;
};
gpio_keys_control: gpio-keys-control {
compatible = "gpio-keys";
pinctrl-0 = <&btn_pins_ctrl>;
pinctrl-names = "default";
button-a {
gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
label = "EAST";
linux,code = <BTN_EAST>;
};
button-b {
gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
label = "SOUTH";
linux,code = <BTN_SOUTH>;
};
button-down {
gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
label = "DPAD-DOWN";
linux,code = <BTN_DPAD_DOWN>;
};
button-l1 {
gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
label = "TL";
linux,code = <BTN_TL>;
};
button-l2 {
gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
label = "TL2";
linux,code = <BTN_TL2>;
};
button-left {
gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
label = "DPAD-LEFT";
linux,code = <BTN_DPAD_LEFT>;
};
button-right {
gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
label = "DPAD-RIGHT";
linux,code = <BTN_DPAD_RIGHT>;
};
button-select {
gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
label = "SELECT";
linux,code = <BTN_SELECT>;
};
button-start {
gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
label = "START";
linux,code = <BTN_START>;
};
button-thumbl {
gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
label = "THUMBL";
linux,code = <BTN_THUMBL>;
};
button-thumbr {
gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
label = "THUMBR";
linux,code = <BTN_THUMBR>;
};
button-r1 {
gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
label = "TR";
linux,code = <BTN_TR>;
};
button-r2 {
gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
label = "TR2";
linux,code = <BTN_TR2>;
};
button-up {
gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
label = "DPAD-UP";
linux,code = <BTN_DPAD_UP>;
};
button-x {
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
label = "NORTH";
linux,code = <BTN_NORTH>;
};
button-y {
gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
label = "WEST";
linux,code = <BTN_WEST>;
};
};
gpio_keys_vol: gpio-keys-vol {
compatible = "gpio-keys";
autorepeat;
pinctrl-0 = <&btn_pins_vol>;
pinctrl-names = "default";
button-voldown {
gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
label = "VOLUMEDOWN";
linux,code = <KEY_VOLUMEDOWN>;
};
button-volup {
gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
label = "VOLUMEUP";
linux,code = <KEY_VOLUMEUP>;
};
};
gpio_leds: gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
red_led: led-0 {
color = <LED_COLOR_ID_RED>;
default-state = "off";
gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_STATUS;
};
green_led: led-1 {
color = <LED_COLOR_ID_GREEN>;
default-state = "on";
gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_POWER;
};
amber_led: led-2 {
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_CHARGING;
};
};
hdmi-con {
compatible = "hdmi-connector";
ddc-i2c-bus = <&i2c5>;
type = "c";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk817 1>;
clock-names = "ext_clock";
pinctrl-0 = <&wifi_enable_h>;
pinctrl-names = "default";
post-power-on-delay-ms = <200>;
reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
};
/* Channels reversed for both headphones and speakers. */
sound {
compatible = "simple-audio-card";
pinctrl-0 = <&hp_det>;
pinctrl-names = "default";
simple-audio-card,name = "rk817_ext";
simple-audio-card,aux-devs = <&spk_amp>;
simple-audio-card,format = "i2s";
simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Headphone", "Headphones",
"Speaker", "Internal Speakers";
simple-audio-card,routing =
"MICL", "Mic Jack",
"Headphones", "HPOL",
"Headphones", "HPOR",
"Internal Speakers", "Speaker Amp OUTL",
"Internal Speakers", "Speaker Amp OUTR",
"Speaker Amp INL", "HPOL",
"Speaker Amp INR", "HPOR";
simple-audio-card,pin-switches = "Internal Speakers";
simple-audio-card,codec {
sound-dai = <&rk817>;
};
simple-audio-card,cpu {
sound-dai = <&i2s1_8ch>;
};
};
spk_amp: audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&spk_amp_enable_h>;
pinctrl-names = "default";
sound-name-prefix = "Speaker Amp";
};
vcc5v0_host: regulator-vcc5v0-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc5v0_host_en>;
pinctrl-names = "default";
regulator-name = "vcc5v0_host";
vin-supply = <&dcdc_boost>;
};
vcc_lcd: regulator-vcc-lcd {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc_lcd_en>;
pinctrl-names = "default";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_lcd";
};
vcc_sys: regulator-vcc-sys {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3800000>;
regulator-max-microvolt = <3800000>;
regulator-name = "vcc_sys";
};
vcc_wifi: regulator-vcc-wifi {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&vcc_wifi_h>;
pinctrl-names = "default";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_wifi";
};
};
&combphy1 {
status = "okay";
};
&cru {
assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
<&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
assigned-clock-rates = <32768>, <1200000000>,
<200000000>, <126400000>;
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&dsi_dphy0 {
status = "okay";
};
&dsi0 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
ports {
dsi0_in: port@0 {
reg = <0>;
dsi0_in_vp1: endpoint {
remote-endpoint = <&vp1_out_dsi0>;
};
};
dsi0_out: port@1 {
reg = <1>;
mipi_out_panel: endpoint {
remote-endpoint = <&mipi_in_panel>;
};
};
};
panel: panel@0 {
compatible = "powkiddy,x55-panel", "himax,hx8394";
reg = <0>;
backlight = <&backlight>;
iovcc-supply = <&vcc_lcd>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_rst>;
reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
rotation = <270>;
vcc-supply = <&vcc_lcd>;
port {
mipi_in_panel: endpoint {
remote-endpoint = <&mipi_out_panel>;
};
};
};
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c5>;
pinctrl-0 = <&hdmitxm0_cec>;
pinctrl-names = "default";
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
rk817: pmic@20 {
compatible = "rockchip,rk817";
reg = <0x20>;
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
clock-names = "mclk";
clock-output-names = "rk808-clkout1", "rk808-clkout2";
clocks = <&cru I2S1_MCLKOUT_TX>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
wakeup-source;
#clock-cells = <1>;
#sound-dai-cells = <0>;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc5-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc_sys>;
vcc9-supply = <&dcdc_boost>;
regulators {
vdd_logic: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_logic";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_gpu";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_3v3: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_3v3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca1v8_pmu: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdda_0v9: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda_0v9";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_acodec";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_1v8: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_dvp: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc1v8_dvp";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc2v8_dvp: LDO_REG9 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc2v8_dvp";
regulator-state-mem {
regulator-off-in-suspend;
};
};
dcdc_boost: BOOST {
regulator-min-microvolt = <4700000>;
regulator-max-microvolt = <5400000>;
regulator-name = "boost";
regulator-state-mem {
regulator-off-in-suspend;
};
};
otg_switch: OTG_SWITCH {
regulator-name = "otg_switch";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
rk817_charger: charger {
monitored-battery = <&battery>;
rockchip,resistor-sense-micro-ohms = <10000>;
rockchip,sleep-enter-current-microamp = <150000>;
rockchip,sleep-filter-current-microamp = <100000>;
};
};
vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";
reg = <0x1c>;
fcs,suspend-voltage-selector = <1>;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1390000>;
regulator-name = "vdd_cpu";
regulator-ramp-delay = <2300>;
vin-supply = <&vcc_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c5 {
pinctrl-0 = <&i2c5m1_xfer>;
pinctrl-names = "default";
status = "okay";
};
&i2s0_8ch {
status = "okay";
};
&i2s1_8ch {
pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>,
<&i2s1m0_sdo0>;
pinctrl-names = "default";
rockchip,trcm-sync-tx-only;
status = "okay";
};
&pinctrl {
audio-amplifier {
spk_amp_enable_h: spk-amp-enable-h {
rockchip,pins =
<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
gpio-control {
btn_pins_ctrl: btn-pins-ctrl {
rockchip,pins =
<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
btn_pins_vol: btn-pins-vol {
rockchip,pins =
<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
gpio-lcd {
lcd_rst: lcd-rst {
rockchip,pins =
<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
gpio-leds {
led_pins: led-pins {
rockchip,pins =
<4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hp-detect {
hp_det: hp-det {
rockchip,pins =
<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins =
<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
<4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
};
vcc5v0_otg_en: vcc5v0-otg-en {
rockchip,pins =
<4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
vcc-lcd {
vcc_lcd_en: vcc-lcd-en {
rockchip,pins =
<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
vcc-wifi {
vcc_wifi_h: vcc-wifi-h {
rockchip,pins =
<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pmu_io_domains {
status = "okay";
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcca1v8_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcca1v8_pmu>;
vccio5-supply = <&vcc2v8_dvp>;
vccio6-supply = <&vcc1v8_dvp>;
vccio7-supply = <&vcc_3v3>;
};
&pwm4 {
status = "okay";
};
&saradc {
vref-supply = <&vcc_1v8>;
status = "okay";
};
&sdhci {
bus-width = <8>;
mmc-hs200-1_8v;
non-removable;
pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
<&emmc_datastrobe>, <&emmc_rstnout>;
pinctrl-names = "default";
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>,
<&sdmmc0_det>;
pinctrl-names = "default";
sd-uhs-sdr104;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sdmmc1 {
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>;
pinctrl-names = "default";
vmmc-supply = <&vcc_wifi>;
status = "okay";
};
&sdmmc2 {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>,
<&sdmmc2m1_det>;
pinctrl-names = "default";
sd-uhs-sdr104;
vqmmc-supply = <&vcc2v8_dvp>;
status = "okay";
};
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&uart1 {
pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>;
pinctrl-names = "default";
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
};
};
&uart2 {
status = "okay";
};
&usb_host0_xhci {
phys = <&usb2phy0_otg>;
phy-names = "usb2-phy";
status = "okay";
};
&usb_host1_xhci {
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_otg {
status = "okay";
};
&usb2phy0_host {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};
&vp1 {
vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
reg = <ROCKCHIP_VOP2_EP_MIPI0>;
remote-endpoint = <&dsi0_in_vp1>;
};
};

5
arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
View File

@ -31,8 +31,9 @@
fan: gpio_fan {
compatible = "gpio-fan";
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0
4500 1>;
gpio-fan,speed-map =
< 0 0>,
<4500 1>;
pinctrl-names = "default";
pinctrl-0 = <&fan_en_h>;
#cooling-cells = <2>;

1
arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
View File

@ -14,6 +14,7 @@
compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
aliases {
ethernet0 = &gmac1;
mmc1 = &sdmmc0;
};

1
arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
View File

@ -12,6 +12,7 @@
compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566";
aliases {
ethernet0 = &gmac1;
mmc0 = &sdmmc0;
mmc1 = &sdhci;
mmc2 = &sdmmc1;

4
arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
View File

@ -13,6 +13,10 @@
model = "PINE64 RK3566 SOQuartz on Blade carrier board";
compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
aliases {
ethernet0 = &gmac1;
};
/* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */
vcc3v0_sd: vcc3v0-sd-regulator {
compatible = "regulator-fixed";

4
arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
View File

@ -8,6 +8,10 @@
model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
aliases {
ethernet0 = &gmac1;
};
/* labeled +12v in schematic */
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";

4
arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
View File

@ -8,6 +8,10 @@
model = "PINE64 RK3566 SOQuartz on Model A carrier board";
compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
aliases {
ethernet0 = &gmac1;
};
/* labeled DCIN_12V in schematic */
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";

1
arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
View File

@ -12,7 +12,6 @@
compatible = "pine64,soquartz", "rockchip,rk3566";
aliases {
ethernet0 = &gmac1;
mmc0 = &sdmmc0;
mmc1 = &sdhci;
mmc2 = &sdmmc1;

4
arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
View File

@ -12,10 +12,6 @@
compatible = "edgeble,neural-compute-module-6a-io",
"edgeble,neural-compute-module-6a", "rockchip,rk3588";
aliases {
serial2 = &uart2;
};
chosen {
stdout-path = "serial2:1500000n8";
};

6
arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
View File

@ -9,13 +9,9 @@
/ {
model = "Edgeble Neu6B IO Board";
compatible = "edgeble,neural-compute-module-6b-io",
compatible = "edgeble,neural-compute-module-6a-io",
"edgeble,neural-compute-module-6b", "rockchip,rk3588";
aliases {
serial2 = &uart2;
};
chosen {
stdout-path = "serial2:1500000n8";
};

99
arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
View File

@ -16,8 +16,8 @@
compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
aliases {
ethernet0 = &gmac0;
mmc0 = &sdhci;
serial2 = &uart2;
};
chosen {
@ -56,6 +56,63 @@
};
};
analog-sound {
compatible = "simple-audio-card";
pinctrl-names = "default";
pinctrl-0 = <&hp_detect>;
simple-audio-card,name = "RK3588 EVB1 Audio";
simple-audio-card,aux-devs = <&amp_headphone>, <&amp_speaker>;
simple-audio-card,bitclock-master = <&masterdai>;
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&masterdai>;
simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,pin-switches = "Headphones", "Speaker";
simple-audio-card,routing =
"Speaker Amplifier INL", "LOUT2",
"Speaker Amplifier INR", "ROUT2",
"Speaker", "Speaker Amplifier OUTL",
"Speaker", "Speaker Amplifier OUTR",
"Headphones Amplifier INL", "LOUT1",
"Headphones Amplifier INR", "ROUT1",
"Headphones", "Headphones Amplifier OUTL",
"Headphones", "Headphones Amplifier OUTR",
"LINPUT1", "Onboard Microphone",
"RINPUT1", "Onboard Microphone",
"LINPUT2", "Microphone Jack",
"RINPUT2", "Microphone Jack";
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Microphone", "Onboard Microphone",
"Headphone", "Headphones",
"Speaker", "Speaker";
simple-audio-card,cpu {
sound-dai = <&i2s0_8ch>;
};
masterdai: simple-audio-card,codec {
sound-dai = <&es8388>;
system-clock-frequency = <12288000>;
};
};
amp_headphone: headphone-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&headphone_amplifier_en>;
sound-name-prefix = "Headphones Amplifier";
};
amp_speaker: speaker-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&speaker_amplifier_en>;
sound-name-prefix = "Speaker Amplifier";
};
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&vcc12v_dcin>;
@ -240,6 +297,32 @@
};
};
&i2c7 {
status = "okay";
es8388: audio-codec@11 {
compatible = "everest,es8388";
reg = <0x11>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
assigned-clock-rates = <12288000>;
AVDD-supply = <&avcc_1v8_codec_s0>;
DVDD-supply = <&avcc_1v8_codec_s0>;
HPVDD-supply = <&vcc_3v3_s0>;
PVDD-supply = <&vcc_3v3_s0>;
#sound-dai-cells = <0>;
};
};
&i2s0_8ch {
pinctrl-0 = <&i2s0_lrck
&i2s0_mclk
&i2s0_sclk
&i2s0_sdi0
&i2s0_sdo0>;
status = "okay";
};
&mdio0 {
rgmii_phy: ethernet-phy@1 {
/* RTL8211F */
@ -273,6 +356,20 @@
};
&pinctrl {
audio {
hp_detect: headphone-detect {
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
headphone_amplifier_en: headphone-amplifier-en {
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
speaker_amplifier_en: speaker-amplifier-en {
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
rtl8111 {
rtl8111_isolate: rtl8111-isolate {
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;

803
arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts Normal file
View File

@ -0,0 +1,803 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588.dtsi"
/ {
model = "Theobroma Systems RK3588-SBC Jaguar";
compatible = "tsd,rk3588-jaguar", "rockchip,rk3588";
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
/* Can be controlled through SW2 but also GPIO1 on CP2102 on P20 */
button-bios-disable {
label = "BIOS_DISABLE";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <0>;
};
};
aliases {
ethernet0 = &gmac0;
mmc0 = &sdhci;
mmc1 = &sdmmc;
rtc0 = &rtc_twi;
};
chosen {
stdout-path = "serial2:115200n8";
};
/* DCIN is 12-24V but standard is 12V */
dc_12v: dc-12v-regulator {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led1_pin>;
status = "okay";
/* LED1 on PCB */
led-1 {
gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_HEARTBEAT;
linux,default-trigger = "heartbeat";
color = <LED_COLOR_ID_AMBER>;
};
};
pps {
compatible = "pps-gpio";
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
};
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_1v1_nldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
vin-supply = <&vcc5v0_sys>;
};
vcc_1v2_s3: vcc-1v2-s3-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_1v2_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
vin-supply = <&vcc5v0_sys>;
};
/* Exposed on P14 and P15 */
vcc_2v8_s3: vcc-2v8-s3-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_2v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
vin-supply = <&vcc_3v3_s3>;
};
vcc_5v0_usb_a: vcc-5v0-usb-a-regulator {
compatible = "regulator-fixed";
regulator-name = "usb_a_vcc";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
gpio = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vcc_5v0_usb_c1: vcc-5v0-usb-c1-regulator {
compatible = "regulator-fixed";
regulator-name = "5v_usbc1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vcc_5v0_usb_c2: vcc-5v0-usb-c2-regulator {
compatible = "regulator-fixed";
regulator-name = "5v_usbc2";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
gpio = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vcc3v3_mdot2: vcc3v3-mdot2-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_mdot2";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_12v>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
vcc5v0_usb: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
};
&combphy1_ps {
status = "okay";
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b1 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b2 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_b3 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&gmac0 {
clock_in_out = "output";
phy-handle = <&rgmii_phy>;
phy-mode = "rgmii";
phy-supply = <&vcc_1v2_s3>;
pinctrl-names = "default";
pinctrl-0 = <&gmac0_miim
&gmac0_rx_bus2
&gmac0_tx_bus2
&gmac0_rgmii_clk
&gmac0_rgmii_bus
&eth0_pins
&eth_reset>;
tx_delay = <0x10>;
rx_delay = <0x10>;
snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 100000>;
status = "okay";
};
&gpio1 {
mdot2e-w-disable1-n-hog {
gpios = <RK_PB1 GPIO_ACTIVE_LOW>;
output-low;
line-name = "m.2 E-key W_DISABLE1#";
gpio-hog;
};
};
&gpio4 {
mdot2e-w-disable2-n-hog {
gpios = <RK_PC1 GPIO_ACTIVE_LOW>;
output-low;
line-name = "m.2 E-key W_DISABLE2#";
gpio-hog;
};
};
&i2c0 {
pinctrl-0 = <&i2c0m2_xfer>;
status = "okay";
fan@18 {
compatible = "ti,amc6821";
reg = <0x18>;
};
vdd_npu_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_npu_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_big1_s0: regulator@43 {
compatible = "rockchip,rk8603", "rockchip,rk8602";
reg = <0x43>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big1_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
rtc_twi: rtc@6f {
compatible = "isil,isl1208";
reg = <0x6f>;
};
};
&i2c1 {
pinctrl-0 = <&i2c1m4_xfer>;
};
&i2c6 {
pinctrl-0 = <&i2c6m4_xfer>;
};
&i2c7 {
status = "okay";
/* SE050 Secure Element at 0x48; GPIO1_A4 for enable pin */
/* Also on 0x55 */
eeprom@54 {
compatible = "st,24c04", "atmel,24c04";
reg = <0x54>;
pagesize = <16>;
vcc-supply = <&vcc_3v3_s3>;
};
};
&i2c8 {
pinctrl-0 = <&i2c8m2_xfer>;
status = "okay";
vdd_cpu_big0_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big0_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&mdio0 {
rgmii_phy: ethernet-phy@6 {
/* KSZ9031 or KSZ9131 */
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x6>;
clocks = <&cru REFCLKO25M_ETH0_OUT>;
};
};
&pcie2x1l0 {
reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; /* WIFI_PERST0# */
vpcie3v3-supply = <&vcc3v3_mdot2>;
status = "okay";
};
&pinctrl {
emmc {
emmc_reset: emmc-reset {
rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
ethernet {
eth_reset: eth-reset {
rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
led1_pin: led1-pin {
rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&saradc {
vref-supply = <&vcc_1v8_s0>;
status = "okay";
};
&sdhci {
bus-width = <8>;
cap-mmc-highspeed;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
mmc-pwrseq = <&emmc_pwrseq>;
no-sdio;
no-sd;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
supports-cqe;
vmmc-supply = <&vcc_3v3_s3>;
vqmmc-supply = <&vcc_1v8_s3>;
status = "okay";
};
&sdmmc {
broken-cd;
bus-width = <4>;
cap-sd-highspeed;
disable-wp;
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_bus4 &sdmmc_cmd &sdmmc_clk>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-ddr50;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_s3>;
vqmmc-supply = <&vccio_sd_s0>;
status = "okay";
};
&spi2 {
assigned-clocks = <&cru CLK_SPI2>;
assigned-clock-rates = <200000000>;
num-cs = <1>;
pinctrl-names = "default";
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
status = "okay";
pmic@0 {
compatible = "rockchip,rk806";
reg = <0x0>;
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
gpio-controller;
#gpio-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
spi-max-frequency = <1000000>;
system-power-controller;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc5-supply = <&vcc5v0_sys>;
vcc6-supply = <&vcc5v0_sys>;
vcc7-supply = <&vcc5v0_sys>;
vcc8-supply = <&vcc5v0_sys>;
vcc9-supply = <&vcc5v0_sys>;
vcc10-supply = <&vcc5v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
vcc12-supply = <&vcc5v0_sys>;
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
vcca-supply = <&vcc5v0_sys>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs2_null: dvs2-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs3_null: dvs3-null-pins {
pins = "gpio_pwrctrl3";
function = "pin_fun0";
};
regulators {
vdd_gpu_s0: dcdc-reg1 {
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_gpu_s0";
regulator-enable-ramp-delay = <400>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_lit_s0: dcdc-reg2 {
regulator-name = "vdd_cpu_lit_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_log_s0: dcdc-reg3 {
regulator-name = "vdd_log_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_vdenc_s0: dcdc-reg4 {
regulator-name = "vdd_vdenc_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_ddr_s0: dcdc-reg5 {
regulator-name = "vdd_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <900000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vdd2_ddr_s3: dcdc-reg6 {
regulator-name = "vdd2_ddr_s3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_2v0_pldo_s3: dcdc-reg7 {
regulator-name = "vdd_2v0_pldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <2000000>;
};
};
vcc_3v3_s3: dcdc-reg8 {
regulator-name = "vcc_3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vddq_ddr_s0: dcdc-reg9 {
regulator-name = "vddq_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s3: dcdc-reg10 {
regulator-name = "vcc_1v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca_1v8_s0: pldo-reg1 {
regulator-name = "vcca_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s0: pldo-reg2 {
regulator-name = "vcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdda_1v2_s0: pldo-reg3 {
regulator-name = "vdda_1v2_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca_3v3_s0: pldo-reg4 {
regulator-name = "vcca_3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd_s0: pldo-reg5 {
regulator-name = "vccio_sd_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
pldo6_s3: pldo-reg6 {
regulator-name = "pldo6_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_0v75_s3: nldo-reg1 {
regulator-name = "vdd_0v75_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdda_ddr_pll_s0: nldo-reg2 {
regulator-name = "vdda_ddr_pll_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vdda_0v75_s0: nldo-reg3 {
regulator-name = "vdda_0v75_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v85_s0: nldo-reg4 {
regulator-name = "vdda_0v85_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v75_s0: nldo-reg5 {
regulator-name = "vdd_0v75_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&tsadc {
status = "okay";
};
&u2phy2 {
status = "okay";
};
&u2phy2_host {
phy-supply = <&vcc_5v0_usb_a>;
status = "okay";
};
&u2phy3 {
status = "okay";
};
&u2phy3_host {
status = "okay";
};
/* Mule-ATtiny debug UART; typically baudrate 9600 */
&uart0 {
pinctrl-0 = <&uart0m0_xfer>;
status = "okay";
};
/* Main debug interface on P20 micro-USB B port and P21 header */
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
/* RS485 on P19 */
&uart3 {
pinctrl-0 = <&uart3m2_xfer &uart3_rtsn>;
linux,rs485-enabled-at-boot-time;
status = "okay";
};
/* Mule-ATtiny UPDI flashing UART */
&uart7 {
pinctrl-0 = <&uart7m0_xfer>;
status = "okay";
};
/* host0 on P10 USB-A */
&usb_host0_ehci {
status = "okay";
};
/* host0 on P10 USB-A */
&usb_host0_ohci {
status = "okay";
};
/* host1 on M.2 E-key */
&usb_host1_ehci {
status = "okay";
};
/* host1 on M.2 E-key */
&usb_host1_ohci {
status = "okay";
};

1
arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
View File

@ -19,7 +19,6 @@
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
serial2 = &uart2;
};
chosen {

1
arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
View File

@ -19,7 +19,6 @@
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
serial2 = &uart2;
};
chosen {

2
arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
View File

@ -17,9 +17,9 @@
compatible = "pine64,quartzpro64", "rockchip,rk3588";
aliases {
ethernet0 = &gmac0;
mmc0 = &sdhci;
mmc1 = &sdmmc;
serial2 = &uart2;
};
chosen {

9
arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
View File

@ -14,7 +14,6 @@
mmc0 = &sdhci;
mmc1 = &sdmmc;
mmc2 = &sdio;
serial2 = &uart2;
};
chosen {
@ -138,6 +137,10 @@
status = "okay";
};
&combphy2_psu {
status = "okay";
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
@ -765,3 +768,7 @@
&usb_host1_ohci {
status = "okay";
};
&usb_host2_xhci {
status = "okay";
};

2
arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
View File

@ -19,8 +19,6 @@
aliases {
ethernet0 = &gmac1;
mmc0 = &sdhci;
serial2 = &uart2;
serial9 = &uart9;
};
fan: pwm-fan {

1
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
View File

@ -44,7 +44,6 @@
mmc0 = &sdhci;
mmc1 = &sdmmc;
mmc2 = &sdio;
serial2 = &uart2;
};
chosen {

1
arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
View File

@ -12,7 +12,6 @@
aliases {
mmc0 = &sdhci;
serial2 = &uart2;
};
chosen {

6
arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
View File

@ -13,8 +13,8 @@
compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
aliases {
ethernet0 = &gmac1;
mmc0 = &sdmmc;
serial2 = &uart2;
};
chosen {
@ -660,3 +660,7 @@
&usb_host1_ohci {
status = "okay";
};
&usb_host2_xhci {
status = "okay";
};

10
arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
View File

@ -12,9 +12,9 @@
compatible = "radxa,rock-5a", "rockchip,rk3588s";
aliases {
ethernet0 = &gmac1;
mmc0 = &sdhci;
mmc1 = &sdmmc;
serial2 = &uart2;
};
analog-sound {
@ -114,6 +114,10 @@
};
};
&combphy2_psu {
status = "okay";
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
@ -734,3 +738,7 @@
&usb_host1_ohci {
status = "okay";
};
&usb_host2_xhci {
status = "okay";
};

32
arch/arm64/boot/dts/rockchip/rk3588s.dtsi
View File

@ -18,6 +18,38 @@
#address-cells = <2>;
#size-cells = <2>;
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
i2c7 = &i2c7;
i2c8 = &i2c8;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
serial6 = &uart6;
serial7 = &uart7;
serial8 = &uart8;
serial9 = &uart9;
spi0 = &spi0;
spi1 = &spi1;
spi2 = &spi2;
spi3 = &spi3;
spi4 = &spi4;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;