iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[MMC] sdhci: fix interrupt handling

Browse Source 
The specification says that interrupts should be cleared before the source is
removed.  We should also not set unknown bits.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Pierre Ossman 2006-06-30 02:22:26 -07:00 committed by Russell King
parent c7fa9963ee
commit 3192a28f7d
1 changed files with 24 additions and 56 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

80
drivers/mmc/sdhci.c
View File

@ -124,7 +124,12 @@ static void sdhci_init(struct sdhci_host *host)
sdhci_reset(host, SDHCI_RESET_ALL);
intmask = ~(SDHCI_INT_CARD_INT | SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL |
SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE;
writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
@ -360,7 +365,6 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
static void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_data *data;
u32 intmask;
u16 blocks;
BUG_ON(!host->data);
@ -371,14 +375,6 @@ static void sdhci_finish_data(struct sdhci_host *host)
if (host->flags & SDHCI_USE_DMA) {
pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len,
(data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
} else {
intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
intmask = readl(host->ioaddr + SDHCI_INT_ENABLE);
intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
}
/*
@ -512,31 +508,9 @@ static void sdhci_finish_command(struct sdhci_host *host)
DBG("Ending cmd (%x)\n", host->cmd->opcode);
if (host->cmd->data) {
u32 intmask;
if (host->cmd->data)
host->data = host->cmd->data;
if (!(host->flags & SDHCI_USE_DMA)) {
/*
* Don't enable the interrupts until now to make sure we
* get stable handling of the FIFO.
*/
intmask = readl(host->ioaddr + SDHCI_INT_ENABLE);
intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL;
writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL;
writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
/*
* The buffer interrupts are to unreliable so we
* start the transfer immediatly.
*/
sdhci_transfer_pio(host);
}
} else
else
tasklet_schedule(&host->finish_tasklet);
host->cmd = NULL;
@ -914,50 +888,44 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id, struct pt_regs *regs)
DBG("*** %s got interrupt: 0x%08x\n", host->slot_descr, intmask);
if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE))
if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE),
host->ioaddr + SDHCI_INT_STATUS);
tasklet_schedule(&host->card_tasklet);
}
intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
if (intmask & SDHCI_INT_CMD_MASK) {
sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
writel(intmask & SDHCI_INT_CMD_MASK,
host->ioaddr + SDHCI_INT_STATUS);
sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
}
if (intmask & SDHCI_INT_DATA_MASK) {
sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
writel(intmask & SDHCI_INT_DATA_MASK,
host->ioaddr + SDHCI_INT_STATUS);
sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
}
intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
if (intmask & SDHCI_INT_CARD_INT) {
printk(KERN_ERR "%s: Unexpected card interrupt. Please "
"report this to " BUGMAIL ".\n",
mmc_hostname(host->mmc));
sdhci_dumpregs(host);
}
if (intmask & SDHCI_INT_BUS_POWER) {
printk(KERN_ERR "%s: Unexpected bus power interrupt. Please "
"report this to " BUGMAIL ".\n",
printk(KERN_ERR "%s: Card is consuming too much power!\n",
mmc_hostname(host->mmc));
sdhci_dumpregs(host);
writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS);
}
if (intmask & SDHCI_INT_ACMD12ERR) {
printk(KERN_ERR "%s: Unexpected auto CMD12 error. Please "
intmask &= SDHCI_INT_BUS_POWER;
if (intmask) {
printk(KERN_ERR "%s: Unexpected interrupt 0x%08x. Please "
"report this to " BUGMAIL ".\n",
mmc_hostname(host->mmc));
mmc_hostname(host->mmc), intmask);
sdhci_dumpregs(host);
writew(~0, host->ioaddr + SDHCI_ACMD12_ERR);
}
if (intmask)
writel(intmask, host->ioaddr + SDHCI_INT_STATUS);
}
result = IRQ_HANDLED;