Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

Pull LED updates from Bryan Wu:
 "This cycle we got:
   - new driver for leds-mc13783
   - bug fixes
   - code cleanup"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: make sure we unregister a trigger only once
  leds: leds-pwm: properly clean up after probe failure
  leds: clevo-mail: Make probe function __init
  leds-ot200: Fix dependencies
  leds-gpio: of: introduce MODULE_DEVICE_TABLE for module autoloading
  leds: clevo-mail: remove __initdata marker
  leds: leds-ss4200: remove __initdata marker
  leds: blinkm: remove unnecessary spaces
  leds: lp5562: remove unnecessary parentheses
  leds: leds-ss4200: remove DEFINE_PCI_DEVICE_TABLE macro
  leds: leds-s3c24xx: Trivial cleanup in header file
  drivers/leds: delete non-required instances of include <linux/init.h>
  leds: leds-gpio: add retain-state-suspended property
  leds: leds-mc13783: Add devicetree support
  leds: leds-mc13783: Remove unnecessary cleaning of registers on exit
  leds: leds-mc13783: Use proper "max_brightness" value fo LEDs
  leds: leds-mc13783: Use LED core PM functions
  leds: leds-mc13783: Add MC34708 LED support
  leds: Turn off led if blinking is disabled
  ledtrig-cpu: Handle CPU hot(un)plugging
This commit is contained in:
Linus Torvalds 2014-04-10 09:06:10 -07:00
commit 4162877d3f
33 changed files with 276 additions and 130 deletions

View File

@ -21,6 +21,8 @@ LED sub-node properties:
on). The "keep" setting will keep the LED at whatever its current
state is, without producing a glitch. The default is off if this
property is not present.
- retain-state-suspended: (optional) The suspend state can be retained.Such
as charge-led gpio.
Examples:
@ -50,3 +52,13 @@ run-control {
default-state = "on";
};
};
leds {
compatible = "gpio-leds";
charger-led {
gpios = <&gpio1 2 0>;
linux,default-trigger = "max8903-charger-charging";
retain-state-suspended;
};
};

View File

@ -10,9 +10,44 @@ Optional properties:
- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
Sub-nodes:
- leds : Contain the led nodes and initial register values in property
"led-control". Number of register depends of used IC, for MC13783 is 6,
for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of
these registers.
- #address-cells: Must be 1.
- #size-cells: Must be 0.
Each led node should contain "reg", which used as LED ID (described below).
Optional properties "label" and "linux,default-trigger" is described in
Documentation/devicetree/bindings/leds/common.txt.
- regulators : Contain the regulator nodes. The regulators are bound using
their names as listed below with their registers and bits for enabling.
MC13783 LED IDs:
0 : Main display
1 : AUX display
2 : Keypad
3 : Red 1
4 : Green 1
5 : Blue 1
6 : Red 2
7 : Green 2
8 : Blue 2
9 : Red 3
10 : Green 3
11 : Blue 3
MC13892 LED IDs:
0 : Main display
1 : AUX display
2 : Keypad
3 : Red
4 : Green
5 : Blue
MC34708 LED IDs:
0 : Charger Red
1 : Charger Green
MC13783 regulators:
sw1a : regulator SW1A (register 24, bit 0)
sw1b : regulator SW1B (register 25, bit 0)
@ -89,6 +124,18 @@ ecspi@70010000 { /* ECSPI1 */
interrupt-parent = <&gpio0>;
interrupts = <8>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led-control = <0x000 0x000 0x0e0 0x000>;
sysled {
reg = <3>;
label = "system:red:live";
linux,default-trigger = "heartbeat";
};
};
regulators {
sw1_reg: mc13892__sw1 {
regulator-min-microvolt = <600000>;

View File

@ -416,7 +416,7 @@ config LEDS_MC13783
depends on MFD_MC13XXX
help
This option enable support for on-chip LED drivers found
on Freescale Semiconductor MC13783/MC13892 PMIC.
on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC.
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
@ -474,7 +474,7 @@ config LEDS_LM355x
config LEDS_OT200
tristate "LED support for the Bachmann OT200"
depends on LEDS_CLASS && HAS_IOMEM
depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST)
help
This option enables support for the LEDs on the Bachmann OT200.
Say Y to enable LEDs on the Bachmann OT200.

View File

@ -39,9 +39,11 @@ static void led_set_software_blink(struct led_classdev *led_cdev,
led_cdev->blink_delay_on = delay_on;
led_cdev->blink_delay_off = delay_off;
/* never on - don't blink */
if (!delay_on)
/* never on - just set to off */
if (!delay_on) {
__led_set_brightness(led_cdev, LED_OFF);
return;
}
/* never off - just set to brightness */
if (!delay_off) {

View File

@ -13,7 +13,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/device.h>
@ -220,9 +219,12 @@ void led_trigger_unregister(struct led_trigger *trig)
{
struct led_classdev *led_cdev;
if (list_empty_careful(&trig->next_trig))
return;
/* Remove from the list of led triggers */
down_write(&triggers_list_lock);
list_del(&trig->next_trig);
list_del_init(&trig->next_trig);
up_write(&triggers_list_lock);
/* Remove anyone actively using this trigger */

View File

@ -11,7 +11,6 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>

View File

@ -15,7 +15,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/workqueue.h>

View File

@ -7,7 +7,6 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/slab.h>

View File

@ -18,7 +18,6 @@
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
@ -444,7 +443,7 @@ static void led_work(struct work_struct *work)
{
int ret;
struct blinkm_led *led;
struct blinkm_data *data ;
struct blinkm_data *data;
struct blinkm_work *blm_work = work_to_blmwork(work);
led = blm_work->blinkm_led;

View File

@ -19,7 +19,7 @@ MODULE_AUTHOR("Márton Németh <nm127@freemail.hu>");
MODULE_DESCRIPTION("Clevo mail LED driver");
MODULE_LICENSE("GPL");
static bool __initdata nodetect;
static bool nodetect;
module_param_named(nodetect, nodetect, bool, 0);
MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection");
@ -153,7 +153,7 @@ static struct led_classdev clevo_mail_led = {
.flags = LED_CORE_SUSPENDRESUME,
};
static int clevo_mail_led_probe(struct platform_device *pdev)
static int __init clevo_mail_led_probe(struct platform_device *pdev)
{
return led_classdev_register(&pdev->dev, &clevo_mail_led);
}
@ -165,7 +165,6 @@ static int clevo_mail_led_remove(struct platform_device *pdev)
}
static struct platform_driver clevo_mail_led_driver = {
.probe = clevo_mail_led_probe,
.remove = clevo_mail_led_remove,
.driver = {
.name = KBUILD_MODNAME,

View File

@ -3,7 +3,6 @@
*
* Control the Cobalt Qube/RaQ front LED
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/leds.h>

View File

@ -14,7 +14,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/workqueue.h>

View File

@ -14,7 +14,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/workqueue.h>

View File

@ -16,7 +16,6 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/module.h>

View File

@ -11,7 +11,6 @@
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
@ -204,6 +203,9 @@ static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
led.default_state = LEDS_GPIO_DEFSTATE_OFF;
}
if (of_get_property(child, "retain-state-suspended", NULL))
led.retain_state_suspended = 1;
ret = create_gpio_led(&led, &priv->leds[priv->num_leds++],
&pdev->dev, NULL);
if (ret < 0) {
@ -224,6 +226,8 @@ static const struct of_device_id of_gpio_leds_match[] = {
{ .compatible = "gpio-leds", },
{},
};
MODULE_DEVICE_TABLE(of, of_gpio_leds_match);
#else /* CONFIG_OF_GPIO */
static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
{

View File

@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <asm/hd64461.h>

View File

@ -12,7 +12,6 @@
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/leds.h>
#include <linux/mfd/core.h>
#include <linux/mutex.h>

View File

@ -25,7 +25,6 @@
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>

View File

@ -25,7 +25,6 @@
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>

View File

@ -13,7 +13,6 @@
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>
@ -347,9 +346,9 @@ static void lp5562_write_program_memory(struct lp55xx_chip *chip,
/* check the size of program count */
static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
{
return (ptn->size_r >= LP5562_PROGRAM_LENGTH ||
ptn->size_g >= LP5562_PROGRAM_LENGTH ||
ptn->size_b >= LP5562_PROGRAM_LENGTH);
return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
ptn->size_g >= LP5562_PROGRAM_LENGTH ||
ptn->size_b >= LP5562_PROGRAM_LENGTH;
}
static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)

View File

@ -17,7 +17,6 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/workqueue.h>

View File

@ -1,5 +1,5 @@
/*
* LEDs driver for Freescale MC13783/MC13892
* LEDs driver for Freescale MC13783/MC13892/MC34708
*
* Copyright (C) 2010 Philippe Rétornaz
*
@ -17,57 +17,56 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/of.h>
#include <linux/workqueue.h>
#include <linux/mfd/mc13xxx.h>
#define MC13XXX_REG_LED_CONTROL(x) (51 + (x))
struct mc13xxx_led_devtype {
int led_min;
int led_max;
int num_regs;
u32 ledctrl_base;
};
struct mc13xxx_led {
struct led_classdev cdev;
struct work_struct work;
struct mc13xxx *master;
enum led_brightness new_brightness;
int id;
struct mc13xxx_leds *leds;
};
struct mc13xxx_leds {
struct mc13xxx *master;
struct mc13xxx_led_devtype *devtype;
int num_leds;
struct mc13xxx_led led[0];
struct mc13xxx_led *led;
};
static unsigned int mc13xxx_max_brightness(int id)
{
if (id >= MC13783_LED_MD && id <= MC13783_LED_KP)
return 0x0f;
else if (id >= MC13783_LED_R1 && id <= MC13783_LED_B3)
return 0x1f;
return 0x3f;
}
static void mc13xxx_led_work(struct work_struct *work)
{
struct mc13xxx_led *led = container_of(work, struct mc13xxx_led, work);
int reg, mask, value, bank, off, shift;
struct mc13xxx_leds *leds = led->leds;
unsigned int reg, bank, off, shift;
switch (led->id) {
case MC13783_LED_MD:
reg = MC13XXX_REG_LED_CONTROL(2);
shift = 9;
mask = 0x0f;
value = led->new_brightness >> 4;
break;
case MC13783_LED_AD:
reg = MC13XXX_REG_LED_CONTROL(2);
shift = 13;
mask = 0x0f;
value = led->new_brightness >> 4;
break;
case MC13783_LED_KP:
reg = MC13XXX_REG_LED_CONTROL(2);
shift = 17;
mask = 0x0f;
value = led->new_brightness >> 4;
reg = 2;
shift = 9 + (led->id - MC13783_LED_MD) * 4;
break;
case MC13783_LED_R1:
case MC13783_LED_G1:
@ -80,44 +79,35 @@ static void mc13xxx_led_work(struct work_struct *work)
case MC13783_LED_B3:
off = led->id - MC13783_LED_R1;
bank = off / 3;
reg = MC13XXX_REG_LED_CONTROL(3) + bank;
reg = 3 + bank;
shift = (off - bank * 3) * 5 + 6;
value = led->new_brightness >> 3;
mask = 0x1f;
break;
case MC13892_LED_MD:
reg = MC13XXX_REG_LED_CONTROL(0);
shift = 3;
mask = 0x3f;
value = led->new_brightness >> 2;
break;
case MC13892_LED_AD:
reg = MC13XXX_REG_LED_CONTROL(0);
shift = 15;
mask = 0x3f;
value = led->new_brightness >> 2;
break;
case MC13892_LED_KP:
reg = MC13XXX_REG_LED_CONTROL(1);
shift = 3;
mask = 0x3f;
value = led->new_brightness >> 2;
reg = (led->id - MC13892_LED_MD) / 2;
shift = 3 + (led->id - MC13892_LED_MD) * 12;
break;
case MC13892_LED_R:
case MC13892_LED_G:
case MC13892_LED_B:
off = led->id - MC13892_LED_R;
bank = off / 2;
reg = MC13XXX_REG_LED_CONTROL(2) + bank;
reg = 2 + bank;
shift = (off - bank * 2) * 12 + 3;
value = led->new_brightness >> 2;
mask = 0x3f;
break;
case MC34708_LED_R:
case MC34708_LED_G:
reg = 0;
shift = 3 + (led->id - MC34708_LED_R) * 12;
break;
default:
BUG();
}
mc13xxx_reg_rmw(led->master, reg, mask << shift, value << shift);
mc13xxx_reg_rmw(leds->master, leds->devtype->ledctrl_base + reg,
mc13xxx_max_brightness(led->id) << shift,
led->new_brightness << shift);
}
static void mc13xxx_led_set(struct led_classdev *led_cdev,
@ -130,47 +120,121 @@ static void mc13xxx_led_set(struct led_classdev *led_cdev,
schedule_work(&led->work);
}
#ifdef CONFIG_OF
static struct mc13xxx_leds_platform_data __init *mc13xxx_led_probe_dt(
struct platform_device *pdev)
{
struct mc13xxx_leds *leds = platform_get_drvdata(pdev);
struct mc13xxx_leds_platform_data *pdata;
struct device_node *parent, *child;
struct device *dev = &pdev->dev;
int i = 0, ret = -ENODATA;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return ERR_PTR(-ENOMEM);
of_node_get(dev->parent->of_node);
parent = of_find_node_by_name(dev->parent->of_node, "leds");
if (!parent)
goto out_node_put;
ret = of_property_read_u32_array(parent, "led-control",
pdata->led_control,
leds->devtype->num_regs);
if (ret)
goto out_node_put;
pdata->num_leds = of_get_child_count(parent);
pdata->led = devm_kzalloc(dev, pdata->num_leds * sizeof(*pdata->led),
GFP_KERNEL);
if (!pdata->led) {
ret = -ENOMEM;
goto out_node_put;
}
for_each_child_of_node(parent, child) {
const char *str;
u32 tmp;
if (of_property_read_u32(child, "reg", &tmp))
continue;
pdata->led[i].id = leds->devtype->led_min + tmp;
if (!of_property_read_string(child, "label", &str))
pdata->led[i].name = str;
if (!of_property_read_string(child, "linux,default-trigger",
&str))
pdata->led[i].default_trigger = str;
i++;
}
pdata->num_leds = i;
ret = i > 0 ? 0 : -ENODATA;
out_node_put:
of_node_put(parent);
return ret ? ERR_PTR(ret) : pdata;
}
#else
static inline struct mc13xxx_leds_platform_data __init *mc13xxx_led_probe_dt(
struct platform_device *pdev)
{
return ERR_PTR(-ENOSYS);
}
#endif
static int __init mc13xxx_led_probe(struct platform_device *pdev)
{
struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct mc13xxx *mcdev = dev_get_drvdata(pdev->dev.parent);
struct device *dev = &pdev->dev;
struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(dev);
struct mc13xxx *mcdev = dev_get_drvdata(dev->parent);
struct mc13xxx_led_devtype *devtype =
(struct mc13xxx_led_devtype *)pdev->id_entry->driver_data;
struct mc13xxx_leds *leds;
int i, id, num_leds, ret = -ENODATA;
u32 reg, init_led = 0;
int i, id, ret = -ENODATA;
u32 init_led = 0;
if (!pdata) {
dev_err(&pdev->dev, "Missing platform data\n");
return -ENODEV;
}
num_leds = pdata->num_leds;
if ((num_leds < 1) ||
(num_leds > (devtype->led_max - devtype->led_min + 1))) {
dev_err(&pdev->dev, "Invalid LED count %d\n", num_leds);
return -EINVAL;
}
leds = devm_kzalloc(&pdev->dev, num_leds * sizeof(struct mc13xxx_led) +
sizeof(struct mc13xxx_leds), GFP_KERNEL);
leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
if (!leds)
return -ENOMEM;
leds->devtype = devtype;
leds->num_leds = num_leds;
leds->master = mcdev;
platform_set_drvdata(pdev, leds);
if (dev->parent->of_node) {
pdata = mc13xxx_led_probe_dt(pdev);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
} else if (!pdata)
return -ENODATA;
leds->num_leds = pdata->num_leds;
if ((leds->num_leds < 1) ||
(leds->num_leds > (devtype->led_max - devtype->led_min + 1))) {
dev_err(dev, "Invalid LED count %d\n", leds->num_leds);
return -EINVAL;
}
leds->led = devm_kzalloc(dev, leds->num_leds * sizeof(*leds->led),
GFP_KERNEL);
if (!leds->led)
return -ENOMEM;
for (i = 0; i < devtype->num_regs; i++) {
reg = pdata->led_control[i];
WARN_ON(reg >= (1 << 24));
ret = mc13xxx_reg_write(mcdev, MC13XXX_REG_LED_CONTROL(i), reg);
ret = mc13xxx_reg_write(mcdev, leds->devtype->ledctrl_base + i,
pdata->led_control[i]);
if (ret)
return ret;
}
for (i = 0; i < num_leds; i++) {
for (i = 0; i < leds->num_leds; i++) {
const char *name, *trig;
ret = -EINVAL;
@ -180,30 +244,29 @@ static int __init mc13xxx_led_probe(struct platform_device *pdev)
trig = pdata->led[i].default_trigger;
if ((id > devtype->led_max) || (id < devtype->led_min)) {
dev_err(&pdev->dev, "Invalid ID %i\n", id);
dev_err(dev, "Invalid ID %i\n", id);
break;
}
if (init_led & (1 << id)) {
dev_warn(&pdev->dev,
"LED %i already initialized\n", id);
dev_warn(dev, "LED %i already initialized\n", id);
break;
}
init_led |= 1 << id;
leds->led[i].id = id;
leds->led[i].master = mcdev;
leds->led[i].leds = leds;
leds->led[i].cdev.name = name;
leds->led[i].cdev.default_trigger = trig;
leds->led[i].cdev.flags = LED_CORE_SUSPENDRESUME;
leds->led[i].cdev.brightness_set = mc13xxx_led_set;
leds->led[i].cdev.brightness = LED_OFF;
leds->led[i].cdev.max_brightness = mc13xxx_max_brightness(id);
INIT_WORK(&leds->led[i].work, mc13xxx_led_work);
ret = led_classdev_register(pdev->dev.parent,
&leds->led[i].cdev);
ret = led_classdev_register(dev->parent, &leds->led[i].cdev);
if (ret) {
dev_err(&pdev->dev, "Failed to register LED %i\n", id);
dev_err(dev, "Failed to register LED %i\n", id);
break;
}
}
@ -219,7 +282,6 @@ static int __init mc13xxx_led_probe(struct platform_device *pdev)
static int mc13xxx_led_remove(struct platform_device *pdev)
{
struct mc13xxx *mcdev = dev_get_drvdata(pdev->dev.parent);
struct mc13xxx_leds *leds = platform_get_drvdata(pdev);
int i;
@ -228,9 +290,6 @@ static int mc13xxx_led_remove(struct platform_device *pdev)
cancel_work_sync(&leds->led[i].work);
}
for (i = 0; i < leds->devtype->num_regs; i++)
mc13xxx_reg_write(mcdev, MC13XXX_REG_LED_CONTROL(i), 0);
return 0;
}
@ -238,17 +297,27 @@ static const struct mc13xxx_led_devtype mc13783_led_devtype = {
.led_min = MC13783_LED_MD,
.led_max = MC13783_LED_B3,
.num_regs = 6,
.ledctrl_base = 51,
};
static const struct mc13xxx_led_devtype mc13892_led_devtype = {
.led_min = MC13892_LED_MD,
.led_max = MC13892_LED_B,
.num_regs = 4,
.ledctrl_base = 51,
};
static const struct mc13xxx_led_devtype mc34708_led_devtype = {
.led_min = MC34708_LED_R,
.led_max = MC34708_LED_G,
.num_regs = 1,
.ledctrl_base = 54,
};
static const struct platform_device_id mc13xxx_led_id_table[] = {
{ "mc13783-led", (kernel_ulong_t)&mc13783_led_devtype, },
{ "mc13892-led", (kernel_ulong_t)&mc13892_led_devtype, },
{ "mc34708-led", (kernel_ulong_t)&mc34708_led_devtype, },
{ }
};
MODULE_DEVICE_TABLE(platform, mc13xxx_led_id_table);

View File

@ -21,7 +21,6 @@
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/spinlock.h>

View File

@ -23,7 +23,6 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/gpio.h>

View File

@ -8,7 +8,6 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/leds.h>

View File

@ -14,7 +14,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/of_platform.h>
#include <linux/fb.h>
@ -84,6 +83,15 @@ static inline size_t sizeof_pwm_leds_priv(int num_leds)
(sizeof(struct led_pwm_data) * num_leds);
}
static void led_pwm_cleanup(struct led_pwm_priv *priv)
{
while (priv->num_leds--) {
led_classdev_unregister(&priv->leds[priv->num_leds].cdev);
if (priv->leds[priv->num_leds].can_sleep)
cancel_work_sync(&priv->leds[priv->num_leds].work);
}
}
static int led_pwm_create_of(struct platform_device *pdev,
struct led_pwm_priv *priv)
{
@ -131,8 +139,7 @@ static int led_pwm_create_of(struct platform_device *pdev,
return 0;
err:
while (priv->num_leds--)
led_classdev_unregister(&priv->leds[priv->num_leds].cdev);
led_pwm_cleanup(priv);
return ret;
}
@ -200,8 +207,8 @@ static int led_pwm_probe(struct platform_device *pdev)
return 0;
err:
while (i--)
led_classdev_unregister(&priv->leds[i].cdev);
priv->num_leds = i;
led_pwm_cleanup(priv);
return ret;
}
@ -209,13 +216,8 @@ err:
static int led_pwm_remove(struct platform_device *pdev)
{
struct led_pwm_priv *priv = platform_get_drvdata(pdev);
int i;
for (i = 0; i < priv->num_leds; i++) {
led_classdev_unregister(&priv->leds[i].cdev);
if (priv->leds[i].can_sleep)
cancel_work_sync(&priv->leds[i].work);
}
led_pwm_cleanup(priv);
return 0;
}

View File

@ -12,7 +12,6 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/gpio.h>

View File

@ -63,7 +63,7 @@ MODULE_LICENSE("GPL");
/*
* PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives.
*/
static DEFINE_PCI_DEVICE_TABLE(ich7_lpc_pci_id) = {
static const struct pci_device_id ich7_lpc_pci_id[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) },
@ -78,7 +78,7 @@ static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id)
return 1;
}
static bool __initdata nodetect;
static bool nodetect;
module_param_named(nodetect, nodetect, bool, 0);
MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection");

View File

@ -10,7 +10,6 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/leds.h>

View File

@ -10,7 +10,6 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/err.h>

View File

@ -26,6 +26,7 @@
#include <linux/percpu.h>
#include <linux/syscore_ops.h>
#include <linux/rwsem.h>
#include <linux/cpu.h>
#include "../leds.h"
#define MAX_NAME_LEN 8
@ -92,6 +93,26 @@ static struct syscore_ops ledtrig_cpu_syscore_ops = {
.resume = ledtrig_cpu_syscore_resume,
};
static int ledtrig_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_STARTING:
ledtrig_cpu(CPU_LED_START);
break;
case CPU_DYING:
ledtrig_cpu(CPU_LED_STOP);
break;
}
return NOTIFY_OK;
}
static struct notifier_block ledtrig_cpu_nb = {
.notifier_call = ledtrig_cpu_notify,
};
static int __init ledtrig_cpu_init(void)
{
int cpu;
@ -113,6 +134,7 @@ static int __init ledtrig_cpu_init(void)
}
register_syscore_ops(&ledtrig_cpu_syscore_ops);
register_cpu_notifier(&ledtrig_cpu_nb);
pr_info("ledtrig-cpu: registered to indicate activity on CPUs\n");
@ -124,6 +146,8 @@ static void __exit ledtrig_cpu_exit(void)
{
int cpu;
unregister_cpu_notifier(&ledtrig_cpu_nb);
for_each_possible_cpu(cpu) {
struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);

View File

@ -104,6 +104,9 @@ enum {
MC13892_LED_R,
MC13892_LED_G,
MC13892_LED_B,
/* MC34708 LED IDs */
MC34708_LED_R,
MC34708_LED_G,
};
struct mc13xxx_led_platform_data {
@ -163,6 +166,9 @@ struct mc13xxx_leds_platform_data {
#define MC13892_LED_C2_CURRENT_G(x) (((x) & 0x7) << 21)
/* MC13892 LED Control 3 */
#define MC13892_LED_C3_CURRENT_B(x) (((x) & 0x7) << 9)
/* MC34708 LED Control 0 */
#define MC34708_LED_C0_CURRENT_R(x) (((x) & 0x3) << 9)
#define MC34708_LED_C0_CURRENT_G(x) (((x) & 0x3) << 21)
u32 led_control[MAX_LED_CONTROL_REGS];
};

View File

@ -1,5 +1,4 @@
/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
*
/*
* Copyright (c) 2006 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@ -11,8 +10,8 @@
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_LEDSGPIO_H
#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
#ifndef __LEDS_S3C24XX_H
#define __LEDS_S3C24XX_H
#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */
#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */
@ -25,4 +24,4 @@ struct s3c24xx_led_platdata {
char *def_trigger;
};
#endif /* __ASM_ARCH_LEDSGPIO_H */
#endif /* __LEDS_S3C24XX_H */