alarmtimer: Use maximum alarm time for suspend
Some userspace applications use timerfd_create() to request wakeups after a long period of time. For example, a backup application may request a wakeup once per week. This is perfectly fine as long as the system does not try to suspend. However, if the system tries to suspend and the system's RTC does not support the required alarm timeout, the suspend operation will fail with an error such as rtc_cmos 00:01: Alarms can be up to one day in the future PM: dpm_run_callback(): platform_pm_suspend+0x0/0x4a returns -22 alarmtimer alarmtimer.4.auto: platform_pm_suspend+0x0/0x4a returned -22 after 117 usecs PM: Device alarmtimer.4.auto failed to suspend: error -22 This results in a refusal to suspend the system, causing substantial battery drain on affected systems. To fix the problem, use the maximum alarm time offset as reported by RTC drivers to set the maximum alarm time. While this may result in early wakeups from suspend, it is still much better than not suspending at all. Standardize system behavior if the requested alarm timeout is larger than the alarm timeout supported by the rtc chip. Currently, in this situation, the RTC driver will do one of the following: - It may return an error. - It may limit the alarm timeout to the maximum supported by the rtc chip. - It may mask the timeout by the maximum alarm timeout supported by the RTC chip (i.e. a requested timeout of 1 day + 1 minute may result in a 1 minute timeout). With this in place, if the RTC driver reports the maximum alarm timeout supported by the RTC chip, the system will always limit the alarm timeout to the maximum supported by the RTC chip. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <jstultz@google.com> Link: https://lore.kernel.org/r/20230915152238.1144706-3-linux@roeck-us.net
This commit is contained in:
parent
a0fddaa0b5
commit
8ceea12d18
@ -290,6 +290,17 @@ static int alarmtimer_suspend(struct device *dev)
|
||||
rtc_timer_cancel(rtc, &rtctimer);
|
||||
rtc_read_time(rtc, &tm);
|
||||
now = rtc_tm_to_ktime(tm);
|
||||
|
||||
/*
|
||||
* If the RTC alarm timer only supports a limited time offset, set the
|
||||
* alarm time to the maximum supported value.
|
||||
* The system may wake up earlier (possibly much earlier) than expected
|
||||
* when the alarmtimer runs. This is the best the kernel can do if
|
||||
* the alarmtimer exceeds the time that the rtc device can be programmed
|
||||
* for.
|
||||
*/
|
||||
min = rtc_bound_alarmtime(rtc, min);
|
||||
|
||||
now = ktime_add(now, min);
|
||||
|
||||
/* Set alarm, if in the past reject suspend briefly to handle */
|
||||
|
Loading…
Reference in New Issue
Block a user