iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ipoctal: clear break interrupt as soon as it occurs

Browse Source 
In some condition we receive the break interrupt but nothing is putted
in the Rx FIFO and the correspondend bit in the status register is not
set. Thus, no-one clear the interrupt and the handler will be called
forever.

This patch clear the break interrupt as soon as it occurs. Then, if the
break character '\0' is putted in the fifo we will manage it.

We can also unmask the Break interrupt but its bit in ISR is still set
on break. So I think is better to keep the registers clean.

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Federico Vaga 2014-09-01 13:49:56 +02:00 committed by Greg Kroah-Hartman
parent 1451f41463
commit 95e838c915
1 changed files with 3 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
drivers/ipack/devices/ipoctal.c
View File

@ -175,7 +175,6 @@ static void ipoctal_irq_rx(struct ipoctal_channel *channel, u8 sr)
flag = TTY_FRAME;
}
if (sr & SR_RECEIVED_BREAK) {
iowrite8(CR_CMD_RESET_BREAK_CHANGE, &channel->regs->w.cr);
channel->stats.rcv_break++;
flag = TTY_BREAK;
}
@ -220,6 +219,9 @@ static void ipoctal_irq_channel(struct ipoctal_channel *channel)
isr = ioread8(&channel->block_regs->r.isr);
sr = ioread8(&channel->regs->r.sr);
if (isr & (IMR_DELTA_BREAK_A | IMR_DELTA_BREAK_B))
iowrite8(CR_CMD_RESET_BREAK_CHANGE, &channel->regs->w.cr);
if ((sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
/* In case of RS-485, change from TX to RX when finishing TX.