sh: Titan board support.

Add support for the titan board.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/Makefile

@@ -106,6 +106,7 @@ machdir-$(CONFIG_SH_7751_SYSTEMH)		:= renesas/systemh
 machdir-$(CONFIG_SH_EDOSK7705)			:= renesas/edosk7705
 machdir-$(CONFIG_SH_SH4202_MICRODEV)		:= superh/microdev
 machdir-$(CONFIG_SH_LANDISK)			:= landisk
+machdir-$(CONFIG_SH_TITAN)			:= titan
 machdir-$(CONFIG_SH_UNKNOWN)			:= unknown
 
 incdir-y			:= $(notdir $(machdir-y))

arch/sh/boards/titan/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the Nimble Microsystems TITAN specific parts of the kernel
+#
+
+obj-y	 := setup.o io.o

arch/sh/boards/titan/io.c

@@ -0,0 +1,156 @@
+/*
+ *	I/O routines for Titan
+ */
+
+#include <linux/pci.h>
+#include <asm/machvec.h>
+#include <asm/addrspace.h>
+#include <asm/titan.h>
+#include <asm/io.h>
+#include "../../drivers/pci/pci-sh7751.h"
+
+#define PCIIOBR         (volatile long *)PCI_REG(SH7751_PCIIOBR)
+#define PCIMBR          (volatile long *)PCI_REG(SH7751_PCIMBR)
+#define PCI_IO_AREA     SH7751_PCI_IO_BASE
+#define PCI_MEM_AREA    SH7751_PCI_CONFIG_BASE
+
+#define PCI_IOMAP(adr)  (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
+
+#if defined(CONFIG_PCI)
+#define CHECK_SH7751_PCIIO(port) \
+  ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
+#define CHECK_SH7751_PCIMEMIO(port) \
+  ((port >= PCIBIOS_MIN_MEM) && (port < (PCIBIOS_MIN_MEM + SH7751_PCI_MEM_SIZE)))
+#else
+#define CHECK_SH7751_PCIIO(port) (0)
+#endif
+
+static inline void delay(void)
+{
+        ctrl_inw(0xa0000000);
+}
+
+static inline volatile u16 *port2adr(unsigned int port)
+{
+        maybebadio((unsigned long)port);
+        return (volatile u16*)port;
+}
+
+u8 titan_inb(unsigned long port)
+{
+        if (PXSEG(port))
+                return ctrl_inb(port);
+        else if (CHECK_SH7751_PCIIO(port))
+                return ctrl_inb(PCI_IOMAP(port));
+        return ctrl_inw(port2adr(port)) & 0xff;
+}
+
+u8 titan_inb_p(unsigned long port)
+{
+        u8 v;
+
+        if (PXSEG(port))
+                v = ctrl_inb(port);
+        else if (CHECK_SH7751_PCIIO(port))
+                v = ctrl_inb(PCI_IOMAP(port));
+        else
+                v = ctrl_inw(port2adr(port)) & 0xff;
+        delay();
+        return v;
+}
+
+u16 titan_inw(unsigned long port)
+{
+        if (PXSEG(port))
+                return ctrl_inw(port);
+        else if (CHECK_SH7751_PCIIO(port))
+                return ctrl_inw(PCI_IOMAP(port));
+        else if (port >= 0x2000)
+                return ctrl_inw(port2adr(port));
+        else
+                maybebadio(port);
+        return 0;
+}
+
+u32 titan_inl(unsigned long port)
+{
+        if (PXSEG(port))
+                return ctrl_inl(port);
+        else if (CHECK_SH7751_PCIIO(port))
+                return ctrl_inl(PCI_IOMAP(port));
+        else if (port >= 0x2000)
+                return ctrl_inw(port2adr(port));
+        else
+                maybebadio(port);
+        return 0;
+}
+
+void titan_outb(u8 value, unsigned long port)
+{
+        if (PXSEG(port))
+                ctrl_outb(value, port);
+        else if (CHECK_SH7751_PCIIO(port))
+                ctrl_outb(value, PCI_IOMAP(port));
+        else
+                ctrl_outw(value, port2adr(port));
+}
+
+void titan_outb_p(u8 value, unsigned long port)
+{
+        if (PXSEG(port))
+                ctrl_outb(value, port);
+        else if (CHECK_SH7751_PCIIO(port))
+                ctrl_outb(value, PCI_IOMAP(port));
+        else
+                ctrl_outw(value, port2adr(port));
+        delay();
+}
+
+void titan_outw(u16 value, unsigned long port)
+{
+        if (PXSEG(port))
+                ctrl_outw(value, port);
+        else if (CHECK_SH7751_PCIIO(port))
+                ctrl_outw(value, PCI_IOMAP(port));
+        else if (port >= 0x2000)
+                ctrl_outw(value, port2adr(port));
+        else
+                maybebadio(port);
+}
+
+void titan_outl(u32 value, unsigned long port)
+{
+        if (PXSEG(port))
+                ctrl_outl(value, port);
+        else if (CHECK_SH7751_PCIIO(port))
+                ctrl_outl(value, PCI_IOMAP(port));
+        else
+                maybebadio(port);
+}
+
+void titan_insl(unsigned long port, void *dst, unsigned long count)
+{
+        maybebadio(port);
+}
+
+void titan_outsl(unsigned long port, const void *src, unsigned long count)
+{
+        maybebadio(port);
+}
+
+void *titan_ioremap(unsigned long offset, unsigned long size) {
+	if (CHECK_SH7751_PCIIO(offset) || CHECK_SH7751_PCIMEMIO(offset))
+		return (void *)offset;
+}
+
+void __iomem *titan_ioport_map(unsigned long port, unsigned int size)
+{
+	if (PXSEG(port))
+		return (void __iomem *)port;
+	else if (CHECK_SH7751_PCIIO(port))
+		return (void __iomem *)PCI_IOMAP(port);
+
+	return (void __iomem *)port2adr(port);
+}
+
+EXPORT_SYMBOL(titan_ioremap);

arch/sh/boards/titan/setup.c

@@ -0,0 +1,60 @@
+/*
+ *	Setup for Titan
+ */
+
+#include <linux/init.h>
+#include <asm/irq.h>
+#include <asm/titan.h>
+#include <asm/io.h>
+
+extern void __init pcibios_init_platform(void);
+
+static void __init init_titan_irq(void)
+{
+	/* enable individual interrupt mode for externals */
+	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+
+	make_ipr_irq( TITAN_IRQ_WAN,   IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); /* PCIRQ0 */
+	make_ipr_irq( TITAN_IRQ_LAN,   IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); /* PCIRQ1 */
+	make_ipr_irq( TITAN_IRQ_MPCIA, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); /* PCIRQ2 */
+	make_ipr_irq( TITAN_IRQ_USB,   IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); /* PCIRQ3 */
+}
+
+const char *get_system_type(void)
+{
+	return "Titan";
+}
+
+int __init platform_setup(void)
+{
+	printk("%s Platform Setup\n", get_system_type());
+	return 0;
+}
+
+struct sh_machine_vector mv_titan __initmv = {
+	.mv_nr_irqs =	NR_IRQS,
+
+	.mv_inb =	titan_inb,
+	.mv_inw =	titan_inw,
+	.mv_inl =	titan_inl,
+	.mv_outb =	titan_outb,
+	.mv_outw =	titan_outw,
+	.mv_outl =	titan_outl,
+
+	.mv_inb_p =	titan_inb_p,
+	.mv_inw_p =	titan_inw,
+	.mv_inl_p =	titan_inl,
+	.mv_outb_p =	titan_outb_p,
+	.mv_outw_p =	titan_outw,
+	.mv_outl_p =	titan_outl,
+
+	.mv_insl =	titan_insl,
+	.mv_outsl =	titan_outsl,
+
+	.mv_ioremap =	titan_ioremap,
+	.mv_ioport_map = titan_ioport_map,
+
+	.mv_init_irq =	init_titan_irq,
+	.mv_init_pci =	pcibios_init_platform,
+};
+ALIAS_MV(titan)

arch/sh/drivers/pci/Makefile

@@ -14,3 +14,4 @@ obj-$(CONFIG_SH_SECUREEDGE5410)		+= ops-snapgear.o
 obj-$(CONFIG_SH_BIGSUR)			+= ops-bigsur.o
 obj-$(CONFIG_SH_RTS7751R2D)		+= ops-rts7751r2d.o fixups-rts7751r2d.o
 obj-$(CONFIG_SH_SH03)			+= ops-sh03.o fixups-sh03.o
+obj-$(CONFIG_SH_TITAN)			+= ops-titan.o

arch/sh/drivers/pci/ops-titan.c

@@ -0,0 +1,84 @@
+/*
+ * arch/sh/drivers/pci/ops-titan.c
+ *
+ * Ported to new API by Paul Mundt <lethal@linux-sh.org>
+ *
+ * Modified from ops-snapgear.c written by  David McCullough
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the Titan boards
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/titan.h>
+#include "pci-sh7751.h"
+
+int __init pcibios_map_platform_irq(u8 slot, u8 pin)
+{
+	int irq = -1;
+
+	switch (slot) {
+	case 0: irq = TITAN_IRQ_WAN;   break;	/* eth0 (WAN) */
+	case 1: irq = TITAN_IRQ_LAN;   break;	/* eth1 (LAN) */
+	case 2: irq = TITAN_IRQ_MPCIA; break;	/* mPCI A */
+	case 3: irq = TITAN_IRQ_MPCIB; break;	/* mPCI B */
+	case 4: irq = TITAN_IRQ_USB;   break;	/* USB */
+	default:
+		printk(KERN_INFO "PCI: Bad IRQ mapping request for slot %d\n", slot);
+		return -1;
+	}
+
+	printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
+		slot, pin - 1 + 'A', irq);
+
+	return irq;
+}
+
+static struct resource sh7751_io_resource = {
+	.name	= "SH7751_IO",
+	.start	= SH7751_PCI_IO_BASE,
+	.end	= SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+	.name	= "SH7751_mem",
+	.start	= SH7751_PCI_MEMORY_BASE,
+	.end	= SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+extern struct pci_ops sh7751_pci_ops;
+
+struct pci_channel board_pci_channels[] = {
+	{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+	{ NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh7751_pci_address_map sh7751_pci_map = {
+	.window0	= {
+		.base	= SH7751_CS2_BASE_ADDR,
+		.size	= SH7751_MEM_REGION_SIZE*2,	/* cs2 and cs3 */
+	},
+
+	.window1	= {
+		.base	= SH7751_CS2_BASE_ADDR,
+		.size	= SH7751_MEM_REGION_SIZE*2,
+	},
+
+	.flags	= SH7751_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+	return sh7751_pcic_init(&sh7751_pci_map);
+}

arch/sh/drivers/pci/pci.c

@@ -1,21 +1,25 @@
-/* arch/sh/kernel/pci.c
- * $Id: pci.c,v 1.1 2003/08/24 19:15:45 lethal Exp $
+/*
+ * arch/sh/drivers/pci/pci.c
  *
  * Copyright (c) 2002 M. R. Brown  <mrbrown@linux-sh.org>
- * 
- * 
+ * Copyright (c) 2004, 2005 Paul Mundt  <lethal@linux-sh.org>
+ *
  * These functions are collected here to reduce duplication of common
  * code amongst the many platform-specific PCI support code files.
- * 
+ *
  * These routines require the following board-specific routines:
  * void pcibios_fixup_irqs();
  *
  * See include/asm-sh/pci.h for more information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
-
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <asm/io.h>
 
 static int __init pcibios_init(void)
 {
@@ -26,9 +30,8 @@ static int __init pcibios_init(void)
 #ifdef CONFIG_PCI_AUTO
 	/* assign resources */
 	busno = 0;
-	for (p = board_pci_channels; p->pci_ops != NULL; p++) {
+	for (p = board_pci_channels; p->pci_ops != NULL; p++)
 		busno = pciauto_assign_resources(busno, p) + 1;
-	}
 #endif
 
 	/* scan the buses */
@@ -61,13 +64,17 @@ pcibios_update_resource(struct pci_dev *dev, struct resource *root,
 		new |= PCI_ROM_ADDRESS_ENABLE;
 		reg = dev->rom_base_reg;
 	} else {
-		/* Somebody might have asked allocation of a non-standard resource */
+		/*
+		 * Somebody might have asked allocation of a non-standard
+		 * resource
+		 */
 		return;
 	}
-	
+
 	pci_write_config_dword(dev, reg, new);
 	pci_read_config_dword(dev, reg, &check);
-	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
+	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ?
+		PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
 		printk(KERN_ERR "PCI: Error while updating region "
 		       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
 		       new, check);
@@ -145,7 +152,8 @@ void pcibios_set_master(struct pci_dev *dev)
 		lat = pcibios_max_latency;
 	else
 		return;
-	printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
+	printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n",
+	       pci_name(dev), lat);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
@@ -153,3 +161,29 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
 {
 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
 }
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
+{
+	unsigned long start = pci_resource_start(dev, bar);
+	unsigned long len = pci_resource_len(dev, bar);
+	unsigned long flags = pci_resource_flags(dev, bar);
+
+	if (!len || !start)
+		return NULL;
+	if (maxlen && len > maxlen)
+		len = maxlen;
+	if (flags & IORESOURCE_IO)
+		return ioport_map(start, len);
+	if (flags & IORESOURCE_MEM)
+		return ioremap(start, len);
+
+	return NULL;
+}
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+	iounmap(addr);
+}
+
+EXPORT_SYMBOL(pci_iomap);
+EXPORT_SYMBOL(pci_iounmap);

arch/sh/tools/mach-types

@@ -26,3 +26,4 @@ EDOSK7705		SH_EDOSK7705
 SH4202_MICRODEV		SH_SH4202_MICRODEV
 SH03			SH_SH03
 LANDISK			SH_LANDISK
+TITAN			SH_TITAN

include/asm-sh/titan.h

@@ -0,0 +1,43 @@
+/*
+ * Platform defintions for Titan
+ */
+
+#ifndef _ASM_SH_TITAN_TITAN_H
+#define _ASM_SH_TITAN_TITAN_H
+
+#define __IO_PREFIX titan
+#include <asm/io_generic.h>
+
+/* IRQ assignments */
+#define TITAN_IRQ_WAN		2	/* eth0 (WAN) */
+#define TITAN_IRQ_LAN		5	/* eth1 (LAN) */
+#define TITAN_IRQ_MPCIA		8	/* mPCI A */
+#define TITAN_IRQ_MPCIB		11	/* mPCI B */
+#define TITAN_IRQ_USB		11	/* USB */
+
+/*
+ * The external interrupt lines, these take up ints 0 - 15 inclusive
+ * depending on the priority for the interrupt.  In fact the priority
+ * is the interrupt :-)
+ */
+#define IRL0_IRQ	0
+#define IRL0_IPR_ADDR	INTC_IPRD
+#define IRL0_IPR_POS	3
+#define IRL0_PRIORITY	8
+
+#define IRL1_IRQ	1
+#define IRL1_IPR_ADDR	INTC_IPRD
+#define IRL1_IPR_POS	2
+#define IRL1_PRIORITY	8
+
+#define IRL2_IRQ	2
+#define IRL2_IPR_ADDR	INTC_IPRD
+#define IRL2_IPR_POS	1
+#define IRL2_PRIORITY	8
+
+#define IRL3_IRQ	3
+#define IRL3_IPR_ADDR	INTC_IPRD
+#define IRL3_IPR_POS	0
+#define IRL3_PRIORITY	8
+
+#endif