New boards: ArmSom Sige7, GameForce Chi,Forlinx FET3588-C with OK3588-C
baseboard, Protonic MECSBC, Wolfvision PF5. The panthor driver for Mali Valhall GPUs landed, so a number of boards enable their gpu (Cool Pi, Theobroma-Systems boards, QuartzPro64, Rock5b, EVB1) Also the USBDP phy driver landed, allowing the usb3 dual-role controllers to be used on EVB1, Rock 5A and 5B, Indiedroid-Nova, Theobroma-Systems Tiger and Jaguar. A lot new peripherals for the Khadas Edge 2 (rtc, uart, sfc, adc, ir, usb, pcie, tf-card, pmic); PCIe3 support on Jaguar, audio support for the rk3308 and cache descriptions for rk356x and rk3328. Corrected model names for boards from Radxa, Pine64, Powkiddy, Anberic and general more dt cleanups. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmYqxdYQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgUkyB/wOV4fCk53ryrNAY40Gh+/WVfOfO+FnEQvx p57s90ZkkGHsK5CHcO+9MFxHM1Sjl4QbgqmYhnAuuH9jEJmlMRZw+SyDnF39hzaE hTBpiY0rQe4IVXxfTy4Khph2cv6ba2kfTa2SOYaCq6+K5RoGfMICVjDGoZVpbMlm KA8ewaZ0fq1gj9cwQ5tzfTQVKl6yeRbLbjKbRRjz0LoOOz3r2WjmWMA4s9l/67uD /yvNO4BMYONx1YifNRxfVuxmsbsF9l9jEHojRTdPGRhRGT0PQHY9/X8jh2DPvAQt 0krD20rYZmCfICiR80NIw/KgBb7gmmzIcQlYOw73CesenEHBV5Mu =1NvS -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmYve/AACgkQYKtH/8kJ UieEmg/9G90hT8bUmIGNvXNQB227GQqR16fJvOmBoxl8k6WeN1jC8lwkOUYr7t54 8jZAb1UaqKZX5RHsnpSLEQQ3dQiXUyUAl/3SKQ+4Wzn/41jLFeUc3XuTV4etDJul fb4Ts0fbEN2x4zDO65NVE6Go8WBdFPFP3+eeBwjL08KBUeIflnRs+JCseY/V54xH 40jRdOqKKuOXb6Jw17rA2nT2t6lpVVfxOGftzD9imDzYQXlNYuna9Ossa/C/q4Rn D/pMNMbwjZnV5f4GrO7ei9/IU4BLih1fCmu++BbVZixUMRl5tIeaa3GrKFOhB7Hz B5I4sz4O/injNZLE+JuOLYXsdAP4feMWEBd8tEhswznxP7NvRZ2Cy6PMHvHIZl8T cwNg1nt8e2vIyXnulGpu6sTXuo8L6ENetSTeWyz3MNX++FVoY1GkUYMgcSMsbVjt thFCThFP4GeWgmn05wp5Cz8LpnRD8QJTOu/MNqF2+4BSxRSEzCMHfv7mwXhCGaQ0 i/QObMv8C2s096SK95qGmGa/0oTv2ZqMsp1lx9YCwNBH7+OpPtBRXO6jQYFlHVDu bT4NILxoD5UdQtVOtuELn88xjMLiRX+rqD/FGtO4oEKTcSBV1vgbqWTNS4S/6REN kPyC33tdlCq0Ylaj7EOcCG8a0xe/bZYKKduHMiRnVYDhlL/18uo= =gZv5 -----END PGP SIGNATURE----- Merge tag 'v6.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards: ArmSom Sige7, GameForce Chi,Forlinx FET3588-C with OK3588-C baseboard, Protonic MECSBC, Wolfvision PF5. The panthor driver for Mali Valhall GPUs landed, so a number of boards enable their gpu (Cool Pi, Theobroma-Systems boards, QuartzPro64, Rock5b, EVB1) Also the USBDP phy driver landed, allowing the usb3 dual-role controllers to be used on EVB1, Rock 5A and 5B, Indiedroid-Nova, Theobroma-Systems Tiger and Jaguar. A lot new peripherals for the Khadas Edge 2 (rtc, uart, sfc, adc, ir, usb, pcie, tf-card, pmic); PCIe3 support on Jaguar, audio support for the rk3308 and cache descriptions for rk356x and rk3328. Corrected model names for boards from Radxa, Pine64, Powkiddy, Anberic and general more dt cleanups. * tag 'v6.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (64 commits) arm64: dts: rockchip: add dual-role usb3 hosts to rk3588 Tiger-Haikou arm64: dts: rockchip: add usb-id extcon on rk3588 tiger arm64: dts: rockchip: fix comment for upper usb3 port arm64: dts: rockchip: fix pcie-refclk frequency on rk3588 tiger arm64: dts: rockchip: correct gpio_pwrctrl1 typos on rk3588(s) boards arm64: dts: rockchip: Correct the model names for Pine64 boards dt-bindings: arm: rockchip: Correct the descriptions for Pine64 boards arm64: dts: rockchip: Add ArmSom Sige7 board dt-bindings: arm: rockchip: Add ArmSoM Sige7 dt-bindings: vendor-prefixes: add ArmSoM arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar arm64: dts: rockchip: move uart2 pinmux to dtsi on rk3588-tiger arm64: dts: rockchip: Add USB-C Support for rk3588s-indiedroid-nova arm64: dts: rockchip: correct the model name for Radxa ROCK 3A dt-bindings: arm: rockchip: correct the model name for Radxa ROCK 3A arm64: dts: rockchip: Correct the model names for Radxa ROCK 5 boards dt-bindings: arm: rockchip: Correct the descriptions for Radxa boards arm64: dts: rockchip: add lower USB3 port to rock-5b arm64: dts: rockchip: add upper USB3 port to rock-5a arm64: dts: rockchip: add USB3 to rk3588-evb1 ... Link: https://lore.kernel.org/r/15361932.O9o76ZdvQC@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
commit
c7639b7992
@ -49,6 +49,11 @@ properties:
|
||||
- anbernic,rg-arc-s
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: ArmSoM Sige7 board
|
||||
items:
|
||||
- const: armsom,sige7
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Asus Tinker board
|
||||
items:
|
||||
- const: asus,rk3288-tinker
|
||||
@ -198,6 +203,13 @@ properties:
|
||||
- const: firefly,rk3568-roc-pc
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Forlinx FET3588-C SoM
|
||||
items:
|
||||
- enum:
|
||||
- forlinx,ok3588-c
|
||||
- const: forlinx,fet3588-c
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: FriendlyElec NanoPi R2 series boards
|
||||
items:
|
||||
- enum:
|
||||
@ -236,6 +248,11 @@ properties:
|
||||
- const: friendlyarm,nanopc-t6
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: GameForce Chi
|
||||
items:
|
||||
- const: gameforce,chi
|
||||
- const: rockchip,rk3326
|
||||
|
||||
- description: GeekBuying GeekBox
|
||||
items:
|
||||
- const: geekbuying,geekbox
|
||||
@ -631,7 +648,7 @@ properties:
|
||||
- const: phytec,rk3288-phycore-som
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Pine64 PinebookPro
|
||||
- description: Pine64 Pinebook Pro
|
||||
items:
|
||||
- const: pine64,pinebook-pro
|
||||
- const: rockchip,rk3399
|
||||
@ -644,7 +661,7 @@ properties:
|
||||
- const: pine64,pinenote
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Pine64 PinePhonePro
|
||||
- description: Pine64 PinePhone Pro
|
||||
items:
|
||||
- const: pine64,pinephone-pro
|
||||
- const: rockchip,rk3399
|
||||
@ -682,7 +699,7 @@ properties:
|
||||
- const: pine64,quartzpro64
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Pine64 SoQuartz SoM
|
||||
- description: Pine64 SOQuartz
|
||||
items:
|
||||
- enum:
|
||||
- pine64,soquartz-blade
|
||||
@ -700,12 +717,17 @@ properties:
|
||||
- powkiddy,x55
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Protonic MECSBC board
|
||||
items:
|
||||
- const: prt,mecsbc
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: QNAP TS-433-4G 4-Bay NAS
|
||||
items:
|
||||
- const: qnap,ts433
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Radxa Compute Module 3(CM3)
|
||||
- description: Radxa Compute Module 3 (CM3)
|
||||
items:
|
||||
- enum:
|
||||
- radxa,cm3-io
|
||||
@ -767,22 +789,22 @@ properties:
|
||||
- const: radxa,rockpis
|
||||
- const: rockchip,rk3308
|
||||
|
||||
- description: Radxa Rock2 Square
|
||||
- description: Radxa Rock 2 Square
|
||||
items:
|
||||
- const: radxa,rock2-square
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Radxa ROCK3 Model A
|
||||
- description: Radxa ROCK 3A
|
||||
items:
|
||||
- const: radxa,rock3a
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Radxa ROCK 5 Model A
|
||||
- description: Radxa ROCK 5A
|
||||
items:
|
||||
- const: radxa,rock-5a
|
||||
- const: rockchip,rk3588s
|
||||
|
||||
- description: Radxa ROCK 5 Model B
|
||||
- description: Radxa ROCK 5B
|
||||
items:
|
||||
- const: radxa,rock-5b
|
||||
- const: rockchip,rk3588
|
||||
@ -927,6 +949,11 @@ properties:
|
||||
- const: turing,rk1
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: WolfVision PF5 mainboard
|
||||
items:
|
||||
- const: wolfvision,rk3568-pf5
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Xunlong Orange Pi 5 Plus
|
||||
items:
|
||||
- const: xunlong,orangepi-5-plus
|
||||
|
||||
@ -151,6 +151,8 @@ patternProperties:
|
||||
description: ARM Ltd.
|
||||
"^armadeus,.*":
|
||||
description: ARMadeus Systems SARL
|
||||
"^armsom,.*":
|
||||
description: ArmSoM Technology Co., Ltd.
|
||||
"^arrow,.*":
|
||||
description: Arrow Electronics
|
||||
"^artesyn,.*":
|
||||
@ -1627,6 +1629,8 @@ patternProperties:
|
||||
description: Wondermedia Technologies, Inc.
|
||||
"^wobo,.*":
|
||||
description: Wobo
|
||||
"^wolfvision,.*":
|
||||
description: WolfVision GmbH
|
||||
"^x-powers,.*":
|
||||
description: X-Powers
|
||||
"^xen,.*":
|
||||
|
||||
@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-gameforce-chi.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
|
||||
@ -100,6 +101,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-mecsbc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
|
||||
@ -107,6 +109,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo
|
||||
@ -114,6 +119,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
|
||||
|
||||
@ -578,6 +578,48 @@
|
||||
#dma-cells = <1>;
|
||||
};
|
||||
|
||||
/*
|
||||
* - can be clock producer or consumer
|
||||
* - up to 8 capture channels and 2 playback channels
|
||||
* - connected internally to audio codec
|
||||
*/
|
||||
i2s_8ch_2: i2s@ff320000 {
|
||||
compatible = "rockchip,rk3308-i2s-tdm";
|
||||
reg = <0x0 0xff320000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-names = "mclk_tx", "mclk_rx", "hclk";
|
||||
clocks = <&cru SCLK_I2S2_8CH_TX>,
|
||||
<&cru SCLK_I2S2_8CH_RX>,
|
||||
<&cru HCLK_I2S2_8CH>;
|
||||
dmas = <&dmac1 5>, <&dmac1 4>;
|
||||
dma-names = "rx", "tx";
|
||||
resets = <&cru SRST_I2S2_8CH_TX_M>, <&cru SRST_I2S2_8CH_RX_M>;
|
||||
reset-names = "tx-m", "rx-m";
|
||||
rockchip,grf = <&grf>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* - can be clock consumer only
|
||||
* - up to 4 capture channels, no playback
|
||||
* - connected internally to audio codec
|
||||
*/
|
||||
i2s_8ch_3: i2s@ff330000 {
|
||||
compatible = "rockchip,rk3308-i2s-tdm";
|
||||
reg = <0x0 0xff330000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-names = "mclk_tx", "mclk_rx", "hclk";
|
||||
clocks = <&cru SCLK_I2S3_8CH_TX>,
|
||||
<&cru SCLK_I2S3_8CH_RX>,
|
||||
<&cru HCLK_I2S3_8CH>;
|
||||
dmas = <&dmac1 7>;
|
||||
dma-names = "rx";
|
||||
resets = <&cru SRST_I2S3_8CH_TX_M>, <&cru SRST_I2S3_8CH_RX_M>;
|
||||
reset-names = "tx-m", "rx-m";
|
||||
rockchip,grf = <&grf>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2s_2ch_0: i2s@ff350000 {
|
||||
compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s";
|
||||
reg = <0x0 0xff350000 0x0 0x1000>;
|
||||
@ -761,6 +803,20 @@
|
||||
assigned-clock-rates = <32768>;
|
||||
};
|
||||
|
||||
codec: codec@ff560000 {
|
||||
compatible = "rockchip,rk3308-codec";
|
||||
reg = <0x0 0xff560000 0x0 0x10000>;
|
||||
rockchip,grf = <&grf>;
|
||||
clock-names = "mclk_tx", "mclk_rx", "hclk";
|
||||
clocks = <&cru SCLK_I2S2_8CH_TX_OUT>,
|
||||
<&cru SCLK_I2S2_8CH_RX_OUT>,
|
||||
<&cru PCLK_ACODEC>;
|
||||
reset-names = "codec-reset";
|
||||
resets = <&cru SRST_ACODEC_P>;
|
||||
#sound-dai-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gic: interrupt-controller@ff580000 {
|
||||
compatible = "arm,gic-400";
|
||||
reg = <0x0 0xff581000 0x0 0x1000>,
|
||||
|
||||
809
arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts
Normal file
809
arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts
Normal file
@ -0,0 +1,809 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2024 Chris Morgan <macromorgan@hotmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3326.dtsi"
|
||||
|
||||
/ {
|
||||
model = "GameForce Chi";
|
||||
compatible = "gameforce,chi", "rockchip,rk3326";
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdmmc;
|
||||
mmc1 = &sdio;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
|
||||
adc_joystick: adc-joystick {
|
||||
compatible = "adc-joystick";
|
||||
io-channels = <&saradc 0>,
|
||||
<&saradc 1>;
|
||||
poll-interval = <100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
axis@0 {
|
||||
reg = <0>;
|
||||
abs-flat = <10>;
|
||||
abs-fuzz = <10>;
|
||||
abs-range = <850 175>;
|
||||
linux,code = <ABS_Y>;
|
||||
};
|
||||
|
||||
axis@1 {
|
||||
reg = <1>;
|
||||
abs-flat = <10>;
|
||||
abs-fuzz = <10>;
|
||||
abs-range = <800 190>;
|
||||
linux,code = <ABS_X>;
|
||||
};
|
||||
};
|
||||
|
||||
adc_keys: adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 2>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <60>;
|
||||
|
||||
button-1 {
|
||||
label = "HAPPY1";
|
||||
linux,code = <BTN_TRIGGER_HAPPY1>;
|
||||
press-threshold-microvolt = <15000>;
|
||||
};
|
||||
|
||||
button-2 {
|
||||
label = "HAPPY2";
|
||||
linux,code = <BTN_TRIGGER_HAPPY2>;
|
||||
press-threshold-microvolt = <300000>;
|
||||
};
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
power-supply = <&vcc_bl>;
|
||||
pwms = <&pwm1 0 25000 0>;
|
||||
};
|
||||
|
||||
battery: battery {
|
||||
compatible = "simple-battery";
|
||||
charge-full-design-microamp-hours = <3000000>;
|
||||
charge-term-current-microamp = <300000>;
|
||||
constant-charge-current-max-microamp = <1500000>;
|
||||
constant-charge-voltage-max-microvolt = <4200000>;
|
||||
factory-internal-resistance-micro-ohms = <180000>;
|
||||
ocv-capacity-celsius = <20>;
|
||||
ocv-capacity-table-0 = <4106000 100>, <4071000 95>, <4018000 90>, <3975000 85>,
|
||||
<3946000 80>, <3908000 75>, <3877000 70>, <3853000 65>,
|
||||
<3834000 60>, <3816000 55>, <3802000 50>, <3788000 45>,
|
||||
<3774000 40>, <3760000 35>, <3748000 30>, <3735000 25>,
|
||||
<3718000 20>, <3697000 15>, <3685000 10>, <3625000 5>,
|
||||
<3400000 0>;
|
||||
voltage-max-design-microvolt = <4250000>;
|
||||
voltage-min-design-microvolt = <3400000>;
|
||||
};
|
||||
|
||||
gpio_leds: gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
|
||||
red_led: led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
green_led: led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
blue_led: led-2 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
white_led: led-3 {
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
chg_led: led-4 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_CHARGING;
|
||||
gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
gpio_keys: gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&btn_pins_ctrl>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
button-a {
|
||||
gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
label = "EAST";
|
||||
linux,code = <BTN_EAST>;
|
||||
};
|
||||
|
||||
button-b {
|
||||
gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
||||
label = "SOUTH";
|
||||
linux,code = <BTN_SOUTH>;
|
||||
};
|
||||
|
||||
button-down {
|
||||
gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
|
||||
label = "DPAD-DOWN";
|
||||
linux,code = <BTN_DPAD_DOWN>;
|
||||
};
|
||||
|
||||
button-home {
|
||||
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
label = "HOME";
|
||||
linux,code = <BTN_MODE>;
|
||||
};
|
||||
|
||||
button-l1 {
|
||||
gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
|
||||
label = "TL";
|
||||
linux,code = <BTN_TL>;
|
||||
};
|
||||
|
||||
button-l2 {
|
||||
gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
label = "TL2";
|
||||
linux,code = <BTN_TL2>;
|
||||
};
|
||||
|
||||
button-left {
|
||||
gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
|
||||
label = "DPAD-LEFT";
|
||||
linux,code = <BTN_DPAD_LEFT>;
|
||||
};
|
||||
|
||||
button-r1 {
|
||||
gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
label = "TR";
|
||||
linux,code = <BTN_TR>;
|
||||
};
|
||||
|
||||
button-r2 {
|
||||
gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
label = "TR2";
|
||||
linux,code = <BTN_TR2>;
|
||||
};
|
||||
|
||||
button-right {
|
||||
gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
label = "DPAD-RIGHT";
|
||||
linux,code = <BTN_DPAD_RIGHT>;
|
||||
};
|
||||
|
||||
button-select {
|
||||
gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
|
||||
label = "SELECT";
|
||||
linux,code = <BTN_SELECT>;
|
||||
};
|
||||
|
||||
button-start {
|
||||
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
label = "START";
|
||||
linux,code = <BTN_START>;
|
||||
};
|
||||
|
||||
button-up {
|
||||
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
|
||||
label = "DPAD-UP";
|
||||
linux,code = <BTN_DPAD_UP>;
|
||||
};
|
||||
|
||||
button-x {
|
||||
gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
|
||||
label = "NORTH";
|
||||
linux,code = <BTN_NORTH>;
|
||||
};
|
||||
|
||||
button-y {
|
||||
gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
label = "WEST";
|
||||
linux,code = <BTN_WEST>;
|
||||
};
|
||||
};
|
||||
|
||||
multi-led {
|
||||
compatible = "leds-group-multicolor";
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_KBD_BACKLIGHT;
|
||||
leds = <&red_led>, <&green_led>, <&blue_led>;
|
||||
};
|
||||
|
||||
spk_amp: audio-amplifier {
|
||||
compatible = "simple-audio-amplifier";
|
||||
enable-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&spk_amp_enable_h>;
|
||||
pinctrl-names = "default";
|
||||
sound-name-prefix = "Speaker Amp";
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
pinctrl-0 = <&hp_det>;
|
||||
pinctrl-names = "default";
|
||||
simple-audio-card,name = "rk817_ext";
|
||||
simple-audio-card,aux-devs = <&spk_amp>;
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Mic Jack",
|
||||
"Headphone", "Headphones",
|
||||
"Speaker", "Internal Speakers";
|
||||
simple-audio-card,routing =
|
||||
"MICL", "Mic Jack",
|
||||
"Headphones", "HPOL",
|
||||
"Headphones", "HPOR",
|
||||
"Internal Speakers", "Speaker Amp OUTL",
|
||||
"Internal Speakers", "Speaker Amp OUTR",
|
||||
"Speaker Amp INL", "HPOL",
|
||||
"Speaker Amp INR", "HPOR";
|
||||
simple-audio-card,pin-switches = "Internal Speakers";
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk817>;
|
||||
};
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_2ch>;
|
||||
};
|
||||
};
|
||||
|
||||
vibrator_left: pwm-vibrator-l {
|
||||
compatible = "pwm-vibrator";
|
||||
pwm-names = "enable";
|
||||
pwms = <&pwm4 0 25000 0>;
|
||||
};
|
||||
|
||||
vibrator_right: pwm-vibrator-r {
|
||||
compatible = "pwm-vibrator";
|
||||
pwm-names = "enable";
|
||||
pwms = <&pwm5 0 25000 0>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk817 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
pinctrl-names = "default";
|
||||
post-power-on-delay-ms = <200>;
|
||||
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vccsys: vccsys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v8_sys";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3800000>;
|
||||
regulator-max-microvolt = <3800000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
|
||||
internal_display: panel@0 {
|
||||
reg = <0>;
|
||||
compatible = "gameforce,chi-panel";
|
||||
backlight = <&backlight>;
|
||||
iovcc-supply = <&vcc_lcd>;
|
||||
vcc-supply = <&vcc_lcd>;
|
||||
reset-gpios = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
mipi_out: port@1 {
|
||||
reg = <1>;
|
||||
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-falling-time-ns = <16>;
|
||||
i2c-scl-rising-time-ns = <280>;
|
||||
status = "okay";
|
||||
|
||||
rk817: pmic@20 {
|
||||
compatible = "rockchip,rk817";
|
||||
reg = <0x20>;
|
||||
#clock-cells = <1>;
|
||||
clock-names = "mclk";
|
||||
clock-output-names = "rk808-clkout1", "xin32k";
|
||||
clocks = <&cru SCLK_I2S1_OUT>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
|
||||
pinctrl-names = "default";
|
||||
#sound-dai-cells = <0>;
|
||||
system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vccsys>;
|
||||
vcc2-supply = <&vccsys>;
|
||||
vcc3-supply = <&vccsys>;
|
||||
vcc4-supply = <&vccsys>;
|
||||
vcc5-supply = <&vccsys>;
|
||||
vcc6-supply = <&vccsys>;
|
||||
vcc7-supply = <&vcc_3v0>;
|
||||
vcc8-supply = <&vccsys>;
|
||||
vcc9-supply = <&dcdc_boost>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_arm: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ddr";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-name = "vcc_3v0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_1v0: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-name = "vdd_1v0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0_pmu: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-name = "vcc_3v0_pmu";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "vccio_sd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG6 {
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "vcc_sd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_bl: LDO_REG7 {
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "vcc_bl";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_lcd: LDO_REG8 {
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-name = "vcc_lcd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <2800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_wifi: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "vcc_wifi";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
dcdc_boost: BOOST {
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-name = "dcdc_boost";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
otg_switch: OTG_SWITCH {
|
||||
regulator-name = "otg_switch";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rk817_charger: charger {
|
||||
monitored-battery = <&battery>;
|
||||
rockchip,resistor-sense-micro-ohms = <10000>;
|
||||
rockchip,sleep-enter-current-microamp = <300000>;
|
||||
rockchip,sleep-filter-current-microamp = <100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s1_2ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
vccio1-supply = <&vcc_3v0_pmu>;
|
||||
vccio2-supply = <&vccio_sd>;
|
||||
vccio3-supply = <&vcc_3v0>;
|
||||
vccio4-supply = <&vcc_3v0>;
|
||||
vccio5-supply = <&vcc_3v0>;
|
||||
vccio6-supply = <&vcc_3v0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bluetooth-pins {
|
||||
bt_reset: bt-reset {
|
||||
rockchip,pins =
|
||||
<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bt_wake_dev: bt-wake-dev {
|
||||
rockchip,pins =
|
||||
<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_host: bt-wake-host {
|
||||
rockchip,pins =
|
||||
<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
headphone {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins =
|
||||
<2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-btns {
|
||||
btn_pins_ctrl: btn-pins-ctrl {
|
||||
rockchip,pins =
|
||||
<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
led_pins: led-pins {
|
||||
rockchip,pins =
|
||||
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins =
|
||||
<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
soc_slppin_gpio: soc_slppin_gpio {
|
||||
rockchip,pins =
|
||||
<0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
|
||||
};
|
||||
|
||||
soc_slppin_rst: soc_slppin_rst {
|
||||
rockchip,pins =
|
||||
<0 RK_PA4 2 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
soc_slppin_slp: soc_slppin_slp {
|
||||
rockchip,pins =
|
||||
<0 RK_PA4 1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins =
|
||||
<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
speaker {
|
||||
spk_amp_enable_h: spk-amp-enable-h {
|
||||
rockchip,pins =
|
||||
<2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc_1v8>;
|
||||
pmuio2-supply = <&vcc_3v0_pmu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
no-mmc;
|
||||
no-sd;
|
||||
non-removable;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
no-sdio;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
#address-cells = <1>;
|
||||
pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
|
||||
pinctrl-names = "default";
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <108000000>;
|
||||
spi-rx-bus-width = <2>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
|
||||
u2phy_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* The right ADC joystick exists connected to an unknown ADC
|
||||
* controller which can be communicated with via uart0. This ADC device
|
||||
* is an 8-pin SOIC with no markings located right next to the left ADC
|
||||
* joystick ribbon cable. The pinout for this ADC controller appears to
|
||||
* be pin 1 - VCC (2.8v), pin 2 - 1.8v (clk maybe?), pin 3 - GPIO 10,
|
||||
* pin 4 - unknown, pin 5 - unknown, pin 6 - analog in, pin 7 - analog in,
|
||||
* pin 8 - ground. There is currently a userspace UART driver for this
|
||||
* device but it only works with the BSP joystick driver.
|
||||
*/
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* Bluetooth was not working on BSP and is not currently working on
|
||||
* mainline due to missing firmware. Bluetooth requires removal of DMA
|
||||
* or else it will not probe.
|
||||
*/
|
||||
&uart1 {
|
||||
/delete-property/ dma-names;
|
||||
/delete-property/ dmas;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth: bluetooth {
|
||||
compatible = "realtek,rtl8723ds-bt";
|
||||
device-wake-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
host-wake-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m1_xfer>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
@ -46,8 +46,14 @@
|
||||
cpu-idle-states = <&CPU_SLEEP>;
|
||||
dynamic-power-coefficient = <120>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>;
|
||||
next-level-cache = <&l2_cache>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
@ -59,8 +65,14 @@
|
||||
cpu-idle-states = <&CPU_SLEEP>;
|
||||
dynamic-power-coefficient = <120>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>;
|
||||
next-level-cache = <&l2_cache>;
|
||||
};
|
||||
|
||||
cpu2: cpu@2 {
|
||||
@ -72,8 +84,14 @@
|
||||
cpu-idle-states = <&CPU_SLEEP>;
|
||||
dynamic-power-coefficient = <120>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>;
|
||||
next-level-cache = <&l2_cache>;
|
||||
};
|
||||
|
||||
cpu3: cpu@3 {
|
||||
@ -85,8 +103,14 @@
|
||||
cpu-idle-states = <&CPU_SLEEP>;
|
||||
dynamic-power-coefficient = <120>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>;
|
||||
next-level-cache = <&l2_cache>;
|
||||
};
|
||||
|
||||
idle-states {
|
||||
@ -102,10 +126,13 @@
|
||||
};
|
||||
};
|
||||
|
||||
l2: l2-cache0 {
|
||||
l2_cache: l2-cache {
|
||||
compatible = "cache";
|
||||
cache-level = <2>;
|
||||
cache-unified;
|
||||
cache-size = <0x40000>;
|
||||
cache-line-size = <64>;
|
||||
cache-sets = <256>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -16,7 +16,7 @@
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 PinePhonePro";
|
||||
model = "Pine64 PinePhone Pro";
|
||||
compatible = "pine64,pinephone-pro", "rockchip,rk3399";
|
||||
chassis-type = "handset";
|
||||
|
||||
|
||||
@ -151,6 +151,7 @@
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
rockchip,enable-strobe-pulldown;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -549,7 +550,8 @@
|
||||
&sdhci {
|
||||
max-frequency = <150000000>;
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -194,6 +194,7 @@
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
rockchip,enable-strobe-pulldown;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -648,7 +649,8 @@
|
||||
&sdhci {
|
||||
max-frequency = <150000000>;
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include "rk3566-anbernic-rg353x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "RG353P";
|
||||
model = "Anbernic RG353P";
|
||||
compatible = "anbernic,rg353p", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include "rk3566-anbernic-rg353x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "RG353PS";
|
||||
model = "Anbernic RG353PS";
|
||||
compatible = "anbernic,rg353ps", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include "rk3566-anbernic-rg353x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "RG353V";
|
||||
model = "Anbernic RG353V";
|
||||
compatible = "anbernic,rg353v", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include "rk3566-anbernic-rg353x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "RG353VS";
|
||||
model = "Anbernic RG353VS";
|
||||
compatible = "anbernic,rg353vs", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include "rk3566-anbernic-rgxx3.dtsi"
|
||||
|
||||
/ {
|
||||
model = "RG503";
|
||||
model = "Anbernic RG503";
|
||||
compatible = "anbernic,rg503", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
|
||||
@ -10,6 +10,8 @@
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
chassis-type = "handset";
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
@ -623,9 +625,12 @@
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
no-mmc;
|
||||
no-sd;
|
||||
non-removable;
|
||||
pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
|
||||
pinctrl-names = "default";
|
||||
sd-uhs-sdr50;
|
||||
vmmc-supply = <&vcc_wifi>;
|
||||
vqmmc-supply = <&vcca1v8_pmu>;
|
||||
status = "okay";
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include "rk3566-powkiddy-rk2023.dtsi"
|
||||
|
||||
/ {
|
||||
model = "RGB30";
|
||||
model = "Powkiddy RGB30";
|
||||
compatible = "powkiddy,rgb30", "rockchip,rk3566";
|
||||
};
|
||||
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include "rk3566-powkiddy-rk2023.dtsi"
|
||||
|
||||
/ {
|
||||
model = "RK2023";
|
||||
model = "Powkiddy RK2023";
|
||||
compatible = "powkiddy,rk2023", "rockchip,rk3566";
|
||||
};
|
||||
|
||||
|
||||
@ -10,6 +10,8 @@
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
mmc1 = &sdmmc0;
|
||||
mmc2 = &sdmmc1;
|
||||
|
||||
@ -11,6 +11,7 @@
|
||||
|
||||
/ {
|
||||
model = "Powkiddy x55";
|
||||
chassis-type = "handset";
|
||||
compatible = "powkiddy,x55", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 RK3566 Quartz64-A Board";
|
||||
model = "Pine64 Quartz64 Model A";
|
||||
compatible = "pine64,quartz64-a", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 RK3566 Quartz64-B Board";
|
||||
model = "Pine64 Quartz64 Model B";
|
||||
compatible = "pine64,quartz64-b", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
|
||||
@ -10,7 +10,7 @@
|
||||
#include "rk3566-soquartz.dtsi"
|
||||
|
||||
/ {
|
||||
model = "PINE64 RK3566 SOQuartz on Blade carrier board";
|
||||
model = "Pine64 SOQuartz on Blade carrier board";
|
||||
compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
|
||||
@ -5,7 +5,7 @@
|
||||
#include "rk3566-soquartz.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
|
||||
model = "Pine64 SOQuartz on CM4-IO carrier board";
|
||||
compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
|
||||
@ -5,7 +5,7 @@
|
||||
#include "rk3566-soquartz.dtsi"
|
||||
|
||||
/ {
|
||||
model = "PINE64 RK3566 SOQuartz on Model A carrier board";
|
||||
model = "Pine64 SOQuartz on Model A carrier board";
|
||||
compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 RK3566 SoQuartz SOM";
|
||||
model = "Pine64 SOQuartz system on module";
|
||||
compatible = "pine64,soquartz", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
|
||||
404
arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
Normal file
404
arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
Normal file
@ -0,0 +1,404 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Protonic MECSBC";
|
||||
compatible = "prt,mecsbc", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc0;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
tas2562-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "Speaker";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_8ch>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&tas2562>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: regulator-vdd-gpu {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <915000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
pwm-dutycycle-range = <0 100>; /* dutycycle inverted 0% => 0.915V */
|
||||
};
|
||||
|
||||
p3v3: regulator-p3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "p3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
p1v8: regulator-p1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "p1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vcc_sd: regulator-sd {
|
||||
compatible = "regulator-gpio";
|
||||
enable-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "sdcard-gpio-supply";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
states = <1800000 0x1>, <3300000 0x0>;
|
||||
};
|
||||
|
||||
vdd_npu: regulator-vdd-npu {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-min-microvolt = <915000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
pwm-dutycycle-range = <0 100>; /* dutycycle inverted 0% => 0.915V */
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii-id";
|
||||
clock_in_out = "output";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk
|
||||
&gmac1m1_clkinout
|
||||
&gmac1m1_rgmii_bus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu_opp_table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp-200000000 {
|
||||
opp-hz = /bits/ 64 <200000000>;
|
||||
opp-microvolt = <915000>;
|
||||
};
|
||||
|
||||
opp-300000000 {
|
||||
opp-hz = /bits/ 64 <300000000>;
|
||||
opp-microvolt = <915000>;
|
||||
};
|
||||
|
||||
opp-400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
opp-microvolt = <915000>;
|
||||
};
|
||||
|
||||
opp-600000000 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <920000>;
|
||||
};
|
||||
|
||||
opp-700000000 {
|
||||
opp-hz = /bits/ 64 <700000000>;
|
||||
opp-microvolt = <950000>;
|
||||
};
|
||||
|
||||
opp-800000000 {
|
||||
opp-hz = /bits/ 64 <800000000>;
|
||||
opp-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@60 {
|
||||
compatible = "fcs,fan53555";
|
||||
reg = <0x60>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2m0_xfer>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3m0_xfer>;
|
||||
status = "okay";
|
||||
|
||||
tas2562: amplifier@4c {
|
||||
compatible = "ti,tas2562";
|
||||
reg = <0x4c>;
|
||||
#sound-dai-cells = <0>;
|
||||
shutdown-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_tas2562>;
|
||||
interrupts = <RK_PD1 IRQ_TYPE_LEVEL_LOW>;
|
||||
ti,imon-slot-no = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
|
||||
temperature-sensor@48 {
|
||||
compatible = "ti,tmp1075";
|
||||
reg = <0x48>;
|
||||
};
|
||||
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf85363";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "rtcic_32kout";
|
||||
};
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@2 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ð_phy1_rst>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie20m1_pins>;
|
||||
reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie30x2m1_pins>;
|
||||
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&p3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
ethernet {
|
||||
eth_phy1_rst: eth-phy1-rst {
|
||||
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
tas2562 {
|
||||
pinctrl_tas2562: tas2562 {
|
||||
rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&p3v3>;
|
||||
pmuio2-supply = <&p3v3>;
|
||||
vccio1-supply = <&p1v8>;
|
||||
vccio2-supply = <&p1v8>;
|
||||
vccio3-supply = <&vcc_sd>;
|
||||
vccio4-supply = <&p1v8>;
|
||||
vccio5-supply = <&p3v3>;
|
||||
vccio6-supply = <&p1v8>;
|
||||
vccio7-supply = <&p3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm1m0_pins>;
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm2m0_pins>;
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&p1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
vmmc-supply = <&p3v3>;
|
||||
vqmmc-supply = <&p1v8>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&p3v3>;
|
||||
vqmmc-supply = <&vcc_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
extcon = <&usb2phy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
@ -8,7 +8,7 @@
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK3 Model A";
|
||||
model = "Radxa ROCK 3A";
|
||||
compatible = "radxa,rock3a", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
|
||||
@ -0,0 +1,137 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||||
/*
|
||||
* Device tree overlay for the WolfVision PF5 IO Expander board.
|
||||
*
|
||||
* Copyright (C) 2024 WolfVision GmbH.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/clock/rk3568-cru.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
|
||||
&{/} {
|
||||
gmac0_clkin: external-gmac0-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <50000000>;
|
||||
clock-output-names = "gmac0_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
usb_host_vbus: usb-host-vbus-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_host_vbus_en>;
|
||||
regulator-name = "usb_host_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v_in>;
|
||||
};
|
||||
|
||||
vcc1v8_eth: vcc1v8-eth-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc1v8_eth_en>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "1v8_eth";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_eth: vcc3v3-eth-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-low;
|
||||
gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc3v3_eth_enn>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "3v3_eth";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>,
|
||||
<&cru SCLK_GMAC0>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC0_RMII_SPEED>,
|
||||
<&gmac0_clkin>;
|
||||
clock_in_out = "input";
|
||||
phy-handle = <&dp83826>;
|
||||
phy-mode = "rmii";
|
||||
phy-supply = <&vcc3v3_eth>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_clkinout
|
||||
&gmac0_rx_er
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_tx_bus2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dp83826: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ð_wake_intn ð_phy_rstn>;
|
||||
reset-assert-us = <1000>;
|
||||
reset-deassert-us = <2000>;
|
||||
reset-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
ethernet {
|
||||
eth_wake_intn: eth-wake-intn-pinctrl {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
eth_phy_rstn: eth-phy-rstn-pinctrl {
|
||||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc1v8_eth_en: vcc1v8-eth-en-pinctrl {
|
||||
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc3v3_eth_enn: vcc3v3-eth-enn-pinctrl {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
usb_host_vbus_en: usb-host-vbus-en-pinctrl {
|
||||
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
maximum-speed = "high-speed";
|
||||
phys = <&usb2phy0_host>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&usb_host_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
528
arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts
Normal file
528
arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts
Normal file
@ -0,0 +1,528 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||||
/*
|
||||
* Device tree for the WolfVision PF5 mainboard.
|
||||
*
|
||||
* Copyright (C) 2024 WolfVision GmbH.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/regulator/ti,tps62864.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
model = "WolfVision PF5";
|
||||
compatible = "wolfvision,rk3568-pf5", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
mmc0 = &sdhci;
|
||||
rtc0 = &pcf85623;
|
||||
rtc1 = &rk809;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
|
||||
hdmi_tx: hdmi-tx-connector {
|
||||
compatible = "hdmi-connector";
|
||||
hdmi-pwr-supply = <&hdmi_tx_5v>;
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_tx_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi_tx_5v: hdmi-tx-5v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_tx_5v_en>;
|
||||
regulator-name = "hdmi_tx_5v";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v_in>;
|
||||
};
|
||||
|
||||
pdm_codec: pdm-codec {
|
||||
compatible = "dmic-codec";
|
||||
num-channels = <1>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
pdm_sound: pdm-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "microphone";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&pdm>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&pdm_codec>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc12v_cam: vcc12v-cam-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc12v_cam_en>;
|
||||
regulator-name = "12v_cam";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
vin-supply = <&vcc12v_in>;
|
||||
};
|
||||
|
||||
vcc12v_in: vcc12v-in-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "12v_in";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc3v8_cam: vcc3v8-cam-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc3v8_cam_en>;
|
||||
regulator-name = "3v8_cam";
|
||||
regulator-min-microvolt = <3800000>;
|
||||
regulator-max-microvolt = <3800000>;
|
||||
vin-supply = <&vcc5v_in>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v_in>;
|
||||
};
|
||||
|
||||
vcc5v_in: vcc5v-in-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5v_in";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vcc0v9_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vcc0v9_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vcc0v9_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vcc0v9_cpu>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vcc0v9_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vcc0v9a_image>;
|
||||
avdd-1v8-supply = <&vcc1v8a_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_tx_out: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
vcc1-supply = <&vcc5v_in>;
|
||||
vcc2-supply = <&vcc5v_in>;
|
||||
vcc3-supply = <&vcc5v_in>;
|
||||
vcc4-supply = <&vcc5v_in>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc5v_in>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
wakeup-source;
|
||||
|
||||
regulators {
|
||||
vcc0v9_logic: DCDC_REG1 {
|
||||
regulator-name = "0v9_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc0v9_gpu: DCDC_REG2 {
|
||||
regulator-name = "0v9_gpu";
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v1_ddr4: DCDC_REG3 {
|
||||
regulator-name = "1v1_ddr4";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc0v9_npu: DCDC_REG4 {
|
||||
regulator-name = "0v9_npu";
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8: DCDC_REG5 {
|
||||
regulator-name = "1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc0v9a_image: LDO_REG1 {
|
||||
regulator-name = "0v9a_image";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc0v9a: LDO_REG2 {
|
||||
regulator-name = "0v9a";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc0v9a_pmu: LDO_REG3 {
|
||||
regulator-name = "0v9a_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_acodec: LDO_REG4 {
|
||||
regulator-name = "3v3_acodec";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: LDO_REG5 {
|
||||
regulator-name = "3v3_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8a: LDO_REG7 {
|
||||
regulator-name = "1v8a";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8a_pmu: LDO_REG8 {
|
||||
regulator-name = "1v8a_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8a_image: LDO_REG9 {
|
||||
regulator-name = "1v8a_image";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sw: SWITCH_REG1 {
|
||||
regulator-name = "3v3_sw";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
regulator@42 {
|
||||
compatible = "ti,tps62869";
|
||||
reg = <0x42>;
|
||||
|
||||
regulators {
|
||||
vcc0v9_cpu: SW {
|
||||
regulator-name = "0v9_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <TPS62864_MODE_FPWM>;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
vin-supply = <&vcc5v_in>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pcf85623: rtc@51 {
|
||||
compatible = "nxp,pcf85263";
|
||||
reg = <0x51>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&clk32k_in>;
|
||||
quartz-load-femtofarads = <12500>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3m0_xfer>;
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4m1_xfer>;
|
||||
};
|
||||
|
||||
&pdm {
|
||||
pinctrl-0 = <&pdmm0_clk
|
||||
&pdmm0_sdi0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
cam {
|
||||
vcc12v_cam_en: vcc12v-cam-en-pinctrl {
|
||||
rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc3v8_cam_en: vcc3v8-cam-en-pinctrl {
|
||||
rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmitx {
|
||||
hdmi_tx_5v_en: hdmi-tx-5v-en-pinctrl {
|
||||
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l-pinctrl {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vcc3v3_acodec>;
|
||||
vccio2-supply = <&vcc1v8>;
|
||||
vccio3-supply = <&vcc3v3_sd>;
|
||||
vccio4-supply = <&vcc1v8>;
|
||||
vccio5-supply = <&vcc1v8>;
|
||||
vccio6-supply = <&vcc3v3_sw>;
|
||||
vccio7-supply = <&vcc3v3_sw>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc1v8a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
vmmc-supply = <&vcc3v3_sw>;
|
||||
vqmmc-supply = <&vcc1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "peripheral";
|
||||
/* The following quirks are required since the bInterval is 1 and we
|
||||
* handle steady ISOC streaming. See Usecase 3 in commit 729dcffd1ed3
|
||||
* ("usb: dwc3: gadget: Add support for disabling U1 and U2 entries").
|
||||
*/
|
||||
snps,dis-u1-entry-quirk;
|
||||
snps,dis-u2-entry-quirk;
|
||||
/*
|
||||
* Without this quirk the available fifosize seems to be miscalculated
|
||||
* in cases where many endpoints are used. In one particular situation
|
||||
* 8 IN EPs and 3 OUT EPs where selected and lead to stalled transfers
|
||||
* without the resize quirk.
|
||||
*/
|
||||
tx-fifo-resize;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP2>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
@ -57,6 +57,13 @@
|
||||
#cooling-cells = <2>;
|
||||
enable-method = "psci";
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <128>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>;
|
||||
next-level-cache = <&l3_cache>;
|
||||
};
|
||||
|
||||
cpu1: cpu@100 {
|
||||
@ -66,6 +73,13 @@
|
||||
#cooling-cells = <2>;
|
||||
enable-method = "psci";
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <128>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>;
|
||||
next-level-cache = <&l3_cache>;
|
||||
};
|
||||
|
||||
cpu2: cpu@200 {
|
||||
@ -75,6 +89,13 @@
|
||||
#cooling-cells = <2>;
|
||||
enable-method = "psci";
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <128>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>;
|
||||
next-level-cache = <&l3_cache>;
|
||||
};
|
||||
|
||||
cpu3: cpu@300 {
|
||||
@ -84,9 +105,29 @@
|
||||
#cooling-cells = <2>;
|
||||
enable-method = "psci";
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <128>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>;
|
||||
next-level-cache = <&l3_cache>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* There are no private per-core L2 caches, but only the
|
||||
* L3 cache that appears to the CPU cores as L2 caches
|
||||
*/
|
||||
l3_cache: l3-cache {
|
||||
compatible = "cache";
|
||||
cache-level = <2>;
|
||||
cache-unified;
|
||||
cache-size = <0x80000>;
|
||||
cache-line-size = <64>;
|
||||
cache-sets = <512>;
|
||||
};
|
||||
|
||||
cpu0_opp_table: opp-table-0 {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
721
arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts
Normal file
721
arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts
Normal file
@ -0,0 +1,721 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ArmSoM Sige7";
|
||||
compatible = "armsom,sige7", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
analog-sound {
|
||||
compatible = "audio-graph-card";
|
||||
dais = <&i2s0_8ch_p0>;
|
||||
label = "rk3588-es8316";
|
||||
hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_detect>;
|
||||
routing = "MIC2", "Mic Jack",
|
||||
"Headphones", "HPOL",
|
||||
"Headphones", "HPOR";
|
||||
widgets = "Microphone", "Mic Jack",
|
||||
"Headphone", "Headphones";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_rgb_g>;
|
||||
|
||||
led_green: led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led_red: led-1 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "none";
|
||||
};
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 95 145 195 255>;
|
||||
fan-supply = <&vcc5v0_sys>;
|
||||
pwms = <&pwm1 0 50000 0>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie2x1l2";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
es8316: audio-codec@11 {
|
||||
compatible = "everest,es8316";
|
||||
reg = <0x11>;
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
clock-names = "mclk";
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
port {
|
||||
es8316_p0_0: endpoint {
|
||||
remote-endpoint = <&i2s0_8ch_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
|
||||
i2s0_8ch_p0: port {
|
||||
i2s0_8ch_p0_0: endpoint {
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
remote-endpoint = <&es8316_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* phy1 - right ethernet port */
|
||||
&pcie2x1l0 {
|
||||
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* phy2 - WiFi */
|
||||
&pcie2x1l1 {
|
||||
reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* phy0 - left ethernet port */
|
||||
&pcie2x1l2 {
|
||||
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
led_rgb_g: led-rgb-g {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
led_rgb_r: led-rgb-r {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
hp_detect: hp-detect {
|
||||
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&avcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
mmc-hs200-1_8v;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
status = "okay";
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
spi-max-frequency = <1000000>;
|
||||
reg = <0x0>;
|
||||
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
@ -136,6 +136,11 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
@ -357,7 +362,7 @@
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
|
||||
@ -182,7 +182,7 @@
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
|
||||
@ -9,6 +9,7 @@
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
@ -159,6 +160,18 @@
|
||||
vin-supply = <&avcc_1v8_s0>;
|
||||
};
|
||||
|
||||
vbus5v0_typec: vbus5v0-typec-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&typec5v_pwren>;
|
||||
regulator-name = "vbus5v0_typec";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
@ -281,9 +294,68 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
sram-supply = <&vdd_gpu_mem_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
usbc0: usb-typec@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usbc0_int>;
|
||||
vbus-supply = <&vbus5v0_typec>;
|
||||
status = "okay";
|
||||
|
||||
usb_con: connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
data-role = "dual";
|
||||
op-sink-microwatt = <1000000>;
|
||||
power-role = "dual";
|
||||
sink-pdos =
|
||||
<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
||||
source-pdos =
|
||||
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
try-power-role = "source";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
usbc0_orien_sw: endpoint {
|
||||
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
usbc0_role_sw: endpoint {
|
||||
remote-endpoint = <&dwc3_0_role_switch>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
|
||||
dp_altmode_mux: endpoint {
|
||||
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
@ -410,6 +482,16 @@
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb-typec {
|
||||
typec5v_pwren: typec5v-pwren {
|
||||
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usbc0_int: usbc0-int {
|
||||
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
@ -484,12 +566,16 @@
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: dcdc-reg1 {
|
||||
/* regulator coupling requires always-on */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
regulator-coupled-with = <&vdd_gpu_mem_s0>;
|
||||
regulator-coupled-max-spread = <10000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
@ -534,12 +620,16 @@
|
||||
};
|
||||
|
||||
vdd_gpu_mem_s0: dcdc-reg5 {
|
||||
/* regulator coupling requires always-on */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
regulator-name = "vdd_gpu_mem_s0";
|
||||
regulator-coupled-with = <&vdd_gpu_s0>;
|
||||
regulator-coupled-max-spread = <10000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
@ -1041,6 +1131,22 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -1079,3 +1185,58 @@
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
mode-switch;
|
||||
orientation-switch;
|
||||
sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usbdp_phy0_orientation_switch: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&usbc0_orien_sw>;
|
||||
};
|
||||
|
||||
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&dp_altmode_mux>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
/*
|
||||
* USBDP PHY1 is wired to a female USB3 Type-A connector. Additionally
|
||||
* the differential pairs 2+3 and the aux channel are wired to a RTD2166,
|
||||
* which converts the DP signal into VGA. This is exposed on the
|
||||
* board via a female VGA connector.
|
||||
*/
|
||||
rockchip,dp-lane-mux = <2 3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "otg";
|
||||
usb-role-switch;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dwc3_0_role_switch: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&usbc0_role_sw>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
558
arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi
Normal file
558
arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi
Normal file
@ -0,0 +1,558 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "forlinx,fet3588-c", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_rgb_b>;
|
||||
|
||||
io-led {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
pcie20_avdd0v85: pcie20-avdd0v85-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie20_avdd0v85";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
vin-supply = <&vdd_0v85_s0>;
|
||||
};
|
||||
|
||||
pcie20_avdd1v8: pcie20-avdd1v8-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie20_avdd1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&avcc_1v8_s0>;
|
||||
};
|
||||
|
||||
pcie30_avdd0v75: pcie30-avdd0v75-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd0v75";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
vin-supply = <&avdd_0v75_s0>;
|
||||
};
|
||||
|
||||
pcie30_avdd1v8: pcie30-avdd1v8-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&avcc_1v8_s0>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc4v0_sys: vcc4v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc4v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <4000000>;
|
||||
regulator-max-microvolt = <4000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
mem-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
mem-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
mem-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
mem-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1m2_xfer>;
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc4v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
led_rgb_b: led-rgb-b {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
num-cs = <1>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
spi-max-frequency = <1000000>;
|
||||
reg = <0x0>;
|
||||
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -72,6 +72,27 @@
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* 100MHz reference clock for PCIe peripherals from PI6C557-05BLE
|
||||
* clock generator.
|
||||
* The clock output is gated via the OE pin on the clock generator.
|
||||
* This is modeled as a fixed-clock plus a gpio-gate-clock.
|
||||
*/
|
||||
pcie_refclk_gen: pcie-refclk-gen-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <100000000>;
|
||||
};
|
||||
|
||||
pcie_refclk: pcie-refclk-clock {
|
||||
compatible = "gpio-gate-clock";
|
||||
clocks = <&pcie_refclk_gen>;
|
||||
#clock-cells = <0>;
|
||||
enable-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; /* PCIE30X4_CLKREQN_M0 */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie30x4_clkreqn_m0>;
|
||||
};
|
||||
|
||||
pps {
|
||||
compatible = "pps-gpio";
|
||||
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
@ -245,6 +266,11 @@
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
@ -353,6 +379,30 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
/*
|
||||
* The board has a gpio-controlled "pcie_refclk" generator,
|
||||
* so add it to the list of clocks.
|
||||
*/
|
||||
clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
|
||||
<&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
|
||||
<&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
|
||||
<&pcie_refclk>;
|
||||
clock-names = "aclk_mst", "aclk_slv",
|
||||
"aclk_dbi", "pclk",
|
||||
"aux", "pipe",
|
||||
"ref";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie30x4_waken_m0 &pcie30x4_perstn_m0>;
|
||||
reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTN_M0 */
|
||||
vpcie3v3-supply = <&vcc3v3_mdot2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
emmc {
|
||||
emmc_reset: emmc-reset {
|
||||
@ -371,6 +421,20 @@
|
||||
rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie30x4 {
|
||||
pcie30x4_clkreqn_m0: pcie30x4-clkreqn-m0 {
|
||||
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie30x4_perstn_m0: pcie30x4-perstn-m0 {
|
||||
rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie30x4_waken_m0: pcie30x4-waken-m0 {
|
||||
rockchip,pins = <0 RK_PC7 12 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&saradc {
|
||||
@ -452,7 +516,7 @@
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
|
||||
409
arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts
Normal file
409
arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts
Normal file
@ -0,0 +1,409 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3588-fet3588-c.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Forlinx OK3588-C Board";
|
||||
compatible = "forlinx,ok3588-c", "forlinx,fet3588-c", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
adc-keys-0 {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-maskrom {
|
||||
label = "Maskrom";
|
||||
linux,code = <KEY_SETUP>;
|
||||
press-threshold-microvolt = <400>;
|
||||
};
|
||||
};
|
||||
|
||||
adc-keys-1 {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-volume-up {
|
||||
label = "V+/Recovery";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
press-threshold-microvolt = <17000>;
|
||||
};
|
||||
|
||||
button-volume-down {
|
||||
label = "V-";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
press-threshold-microvolt = <417000>;
|
||||
};
|
||||
|
||||
button-menu {
|
||||
label = "Menu";
|
||||
linux,code = <KEY_MENU>;
|
||||
press-threshold-microvolt = <890000>;
|
||||
};
|
||||
|
||||
button-escape {
|
||||
label = "ESC";
|
||||
linux,code = <KEY_ESC>;
|
||||
press-threshold-microvolt = <1235000>;
|
||||
};
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 95 145 195 255>;
|
||||
fan-supply = <&vcc12v_dcin>;
|
||||
pwms = <&pwm2 0 50000 0>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_detect>;
|
||||
simple-audio-card,name = "RK3588 OK3588-C Audio";
|
||||
simple-audio-card,bitclock-master = <&masterdai>;
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,frame-master = <&masterdai>;
|
||||
simple-audio-card,hp-det-gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,pin-switches = "Headphones", "Speaker";
|
||||
simple-audio-card,widgets =
|
||||
"Headphones", "Headphones",
|
||||
"Speaker", "Speaker",
|
||||
"Microphone", "Internal Microphone",
|
||||
"Microphone", "Headset Microphone";
|
||||
simple-audio-card,routing =
|
||||
"Headphones", "LHP",
|
||||
"Headphones", "RHP",
|
||||
"Speaker", "LSPK",
|
||||
"Speaker", "RSPK",
|
||||
"LMICP", "Headset Microphone",
|
||||
"RMICP", "Internal Microphone";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0_8ch>;
|
||||
};
|
||||
|
||||
masterdai: simple-audio-card,codec {
|
||||
sound-dai = <&nau8822>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc1v8_sys: vcc1v8-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie2x1l0";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <50000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie2x1l2";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: vcc3v3_pcie30-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
phy-mode = "rgmii-rxid";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_tx_bus2
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus>;
|
||||
tx_delay = <0x44>;
|
||||
rx_delay = <0x00>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii-rxid";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1_miim
|
||||
&gmac1_tx_bus2
|
||||
&gmac1_rx_bus2
|
||||
&gmac1_rgmii_clk
|
||||
&gmac1_rgmii_bus>;
|
||||
tx_delay = <0x44>;
|
||||
rx_delay = <0x00>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
tca6424a: gpio@23 {
|
||||
compatible = "ti,tca6424";
|
||||
reg = <0x23>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tca6424a_int>;
|
||||
vcc-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5m2_xfer>;
|
||||
|
||||
pcf8563: rtc@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
nau8822: audio-codec@1a {
|
||||
compatible = "nuvoton,nau8822";
|
||||
reg = <0x1a>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
clock-names = "mclk";
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: ethernet-phy@1 {
|
||||
/* RTL8211F */
|
||||
compatible = "ethernet-phy-id001c.c916",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtl8211f_0_rst>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@2 {
|
||||
/* RTL8211F */
|
||||
compatible = "ethernet-phy-id001c.c916",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtl8211f_1_rst>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_0_rst>;
|
||||
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_2_rst>;
|
||||
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3_rst>;
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pcie2 {
|
||||
pcie2_0_rst: pcie2-0-rst {
|
||||
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_2_rst: pcie2-2-rst {
|
||||
rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie3 {
|
||||
pcie3_rst: pcie3-rst {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
rtl8211f {
|
||||
rtl8211f_0_rst: rtl8211f-0-rst {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
rtl8211f_1_rst: rtl8211f-1-rst {
|
||||
rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
hp_detect: hp-detect {
|
||||
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
tca6424a {
|
||||
tca6424a_int: tca6424a-int {
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&avcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr104;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
@ -13,7 +13,7 @@
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
model = "PINE64 QuartzPro64";
|
||||
model = "Pine64 QuartzPro64";
|
||||
compatible = "pine64,quartzpro64", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
@ -285,6 +285,12 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
sram-supply = <&vdd_gpu_mem_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
@ -491,11 +497,15 @@
|
||||
regulators {
|
||||
vdd_gpu_s0: dcdc-reg1 {
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
/* regulator coupling requires always-on */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-coupled-with = <&vdd_gpu_mem_s0>;
|
||||
regulator-coupled-max-spread = <10000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
@ -545,11 +555,15 @@
|
||||
|
||||
vdd_gpu_mem_s0: dcdc-reg5 {
|
||||
regulator-name = "vdd_gpu_mem_s0";
|
||||
/* regulator coupling requires always-on */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-coupled-with = <&vdd_gpu_s0>;
|
||||
regulator-coupled-max-spread = <10000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
|
||||
@ -7,7 +7,7 @@
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK 5 Model B";
|
||||
model = "Radxa ROCK 5B";
|
||||
compatible = "radxa,rock-5b", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
@ -180,6 +180,11 @@
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
@ -742,6 +747,14 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -761,6 +774,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
@ -777,6 +794,11 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host2_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -113,6 +113,16 @@
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_otg: vcc5v0-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&otg_vbus_drv>;
|
||||
regulator-name = "vcc5v0_otg";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
@ -137,6 +147,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&extcon_usb3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -199,6 +213,13 @@
|
||||
<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
otg_vbus_drv: otg-vbus-drv {
|
||||
rockchip,pins =
|
||||
<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
@ -214,6 +235,23 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
phy-supply = <&vcc5v0_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -231,25 +269,38 @@
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m2_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
rts-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* host0 on Q7_USB_P2, lower usb3 port */
|
||||
&usbdp_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* host0 on Q7_USB_P2, upper usb3 port */
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* host0 on Q7_USB_P2, lower usb3 port */
|
||||
/* host0 on Q7_USB_P2, upper usb3 port */
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* host0_xhci on Q7_USB_P1, usb3-otg port */
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "otg";
|
||||
extcon = <&extcon_usb3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* host1 on Q7_USB_P3, usb2 port */
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
@ -260,7 +311,13 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* host2 on Q7_USB_P2, lower usb3 port */
|
||||
/* host1_xhci on Q7_USB_P0, lower usb3 port */
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* host2 on Q7_USB_P2, upper usb3 port */
|
||||
&usb_host2_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -23,6 +23,14 @@
|
||||
reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
extcon_usb3: extcon-usb3 {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb3_id>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
@ -46,7 +54,7 @@
|
||||
pcie_refclk_gen: pcie-refclk-gen-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <1000000000>;
|
||||
clock-frequency = <100000000>;
|
||||
};
|
||||
|
||||
pcie_refclk: pcie-refclk-clock {
|
||||
@ -139,6 +147,11 @@
|
||||
snps,reset-delays-us = <0 10000 100000>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1m0_xfer>;
|
||||
};
|
||||
@ -322,6 +335,13 @@
|
||||
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb3 {
|
||||
usb3_id: usb3-id {
|
||||
rockchip,pins =
|
||||
<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&saradc {
|
||||
@ -396,7 +416,7 @@
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
@ -683,6 +703,11 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Routed to UART0 on the Q7 connector */
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m2_xfer>;
|
||||
};
|
||||
|
||||
/* Mule-ATtiny UPDI */
|
||||
&uart4 {
|
||||
pinctrl-0 = <&uart4m2_xfer>;
|
||||
|
||||
@ -318,7 +318,7 @@
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
|
||||
@ -7,6 +7,26 @@
|
||||
#include "rk3588-pinctrl.dtsi"
|
||||
|
||||
/ {
|
||||
usb_host1_xhci: usb@fc400000 {
|
||||
compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
|
||||
reg = <0x0 0xfc400000 0x0 0x400000>;
|
||||
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>,
|
||||
<&cru ACLK_USB3OTG1>;
|
||||
clock-names = "ref_clk", "suspend_clk", "bus_clk";
|
||||
dr_mode = "otg";
|
||||
phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>;
|
||||
phy-names = "usb2-phy", "usb3-phy";
|
||||
phy_type = "utmi_wide";
|
||||
power-domains = <&power RK3588_PD_USB>;
|
||||
resets = <&cru SRST_A_USB3OTG1>;
|
||||
snps,dis_enblslpm_quirk;
|
||||
snps,dis-u2-freeclk-exists-quirk;
|
||||
snps,dis-del-phy-power-chg-quirk;
|
||||
snps,dis-tx-ipgap-linecheck-quirk;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie30_phy_grf: syscon@fd5b8000 {
|
||||
compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
|
||||
reg = <0x0 0xfd5b8000 0x0 0x10000>;
|
||||
@ -17,6 +37,36 @@
|
||||
reg = <0x0 0xfd5c0000 0x0 0x100>;
|
||||
};
|
||||
|
||||
usbdpphy1_grf: syscon@fd5cc000 {
|
||||
compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
|
||||
reg = <0x0 0xfd5cc000 0x0 0x4000>;
|
||||
};
|
||||
|
||||
usb2phy1_grf: syscon@fd5d4000 {
|
||||
compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
|
||||
reg = <0x0 0xfd5d4000 0x0 0x4000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
u2phy1: usb2phy@4000 {
|
||||
compatible = "rockchip,rk3588-usb2phy";
|
||||
reg = <0x4000 0x10>;
|
||||
#clock-cells = <0>;
|
||||
clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
|
||||
clock-names = "phyclk";
|
||||
clock-output-names = "usb480m_phy1";
|
||||
interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>;
|
||||
reset-names = "phy", "apb";
|
||||
status = "disabled";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
#phy-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2s8_8ch: i2s@fddc8000 {
|
||||
compatible = "rockchip,rk3588-i2s-tdm";
|
||||
reg = <0x0 0xfddc8000 0x0 0x1000>;
|
||||
@ -310,6 +360,28 @@
|
||||
};
|
||||
};
|
||||
|
||||
usbdp_phy1: phy@fed90000 {
|
||||
compatible = "rockchip,rk3588-usbdp-phy";
|
||||
reg = <0x0 0xfed90000 0x0 0x10000>;
|
||||
#phy-cells = <1>;
|
||||
clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
|
||||
<&cru CLK_USBDP_PHY1_IMMORTAL>,
|
||||
<&cru PCLK_USBDPPHY1>,
|
||||
<&u2phy1>;
|
||||
clock-names = "refclk", "immortal", "pclk", "utmi";
|
||||
resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>,
|
||||
<&cru SRST_USBDP_COMBO_PHY1_CMN>,
|
||||
<&cru SRST_USBDP_COMBO_PHY1_LANE>,
|
||||
<&cru SRST_USBDP_COMBO_PHY1_PCS>,
|
||||
<&cru SRST_P_USBDPPHY1>;
|
||||
reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
|
||||
rockchip,u2phy-grf = <&usb2phy1_grf>;
|
||||
rockchip,usb-grf = <&usb_grf>;
|
||||
rockchip,usbdpphy-grf = <&usbdpphy1_grf>;
|
||||
rockchip,vo-grf = <&vo0_grf>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
combphy1_ps: phy@fee10000 {
|
||||
compatible = "rockchip,rk3588-naneng-combphy";
|
||||
reg = <0x0 0xfee10000 0x0 0x100>;
|
||||
|
||||
@ -203,6 +203,11 @@
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
@ -479,7 +484,7 @@
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
|
||||
@ -316,7 +316,7 @@
|
||||
pinctrl-names = "default";
|
||||
vbus-supply = <&vbus5v0_typec>;
|
||||
|
||||
connector {
|
||||
usb_con: connector {
|
||||
compatible = "usb-c-connector";
|
||||
data-role = "dual";
|
||||
label = "USB-C";
|
||||
@ -325,6 +325,32 @@
|
||||
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
||||
op-sink-microwatt = <1000000>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
usbc0_orien_sw: endpoint {
|
||||
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
usbc0_role_sw: endpoint {
|
||||
remote-endpoint = <&dwc3_0_role_switch>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
dp_altmode_mux: endpoint {
|
||||
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -528,7 +554,7 @@
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
@ -788,6 +814,14 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -839,6 +873,17 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
usb-role-switch;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
dwc3_0_role_switch: endpoint {
|
||||
remote-endpoint = <&usbc0_role_sw>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
@ -850,3 +895,27 @@
|
||||
&usb_host2_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
orientation-switch;
|
||||
mode-switch;
|
||||
sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
rockchip,dp-lane-mux = <2 3>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usbdp_phy0_orientation_switch: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&usbc0_orien_sw>;
|
||||
};
|
||||
|
||||
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&dp_altmode_mux>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -3,7 +3,9 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3588s.dtsi"
|
||||
|
||||
/ {
|
||||
@ -12,11 +14,293 @@
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-function {
|
||||
label = "Function";
|
||||
linux,code = <KEY_FN>;
|
||||
press-threshold-microvolt = <17000>;
|
||||
};
|
||||
};
|
||||
|
||||
ir-receiver {
|
||||
compatible = "gpio-ir-receiver";
|
||||
gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir_receiver_pin>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
red_led: led-0 {
|
||||
label = "red_led";
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
linux,default-trigger = "none";
|
||||
max-brightness = <255>;
|
||||
pwms = <&pwm11 0 25000 0>;
|
||||
};
|
||||
|
||||
green_led: led-1 {
|
||||
label = "green_led";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_POWER;
|
||||
linux,default-trigger = "default-on";
|
||||
max-brightness = <255>;
|
||||
pwms = <&pwm14 0 25000 0>;
|
||||
};
|
||||
|
||||
blue_led: led-2 {
|
||||
label = "blue_led";
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
linux,default-trigger = "none";
|
||||
max-brightness = <255>;
|
||||
pwms = <&pwm15 0 25000 0>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pcie_wl: vcc3v3-pcie-wl-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_2_vcc3v3_en>;
|
||||
regulator-name = "vcc3v3_pcie_wl";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vdd_3v3_sd: vdd-3v3-sd-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_3v3_sd";
|
||||
gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
regulator-boot-on;
|
||||
enable-active-high;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vdd_sd_en>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
vdd_sd {
|
||||
vdd_sd_en: vdd-sd-en {
|
||||
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie2 {
|
||||
pcie2_2_rst: pcie2-2-rst {
|
||||
rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_2_vcc3v3_en: pcie2-2-vcc-en {
|
||||
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
ir-receiver {
|
||||
ir_receiver_pin: ir-receiver-pin {
|
||||
rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
bt_reset_pin: bt-reset-pin {
|
||||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_pin: bt-wake-pin {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
bt_wake_host_irq: bt-wake-host-irq {
|
||||
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_2_rst>;
|
||||
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie_wl>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm11 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm11m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm14 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm14m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm15 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm15m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&avcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
@ -29,7 +313,403 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
no-mmc;
|
||||
no-sdio;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vdd_3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fspim2_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <100000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
status = "okay";
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
spi-max-frequency = <1000000>;
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart9 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host2_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -336,7 +336,7 @@
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include "rk3588s.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK 5 Model A";
|
||||
model = "Radxa ROCK 5A";
|
||||
compatible = "radxa,rock-5a", "rockchip,rk3588s";
|
||||
|
||||
aliases {
|
||||
@ -414,7 +414,7 @@
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
@ -697,6 +697,14 @@
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -720,6 +728,11 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
status = "okay";
|
||||
rockchip,dp-lane-mux = <2 3>;
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
@ -730,6 +743,11 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -347,6 +347,11 @@
|
||||
};
|
||||
};
|
||||
|
||||
display_subsystem: display-subsystem {
|
||||
compatible = "rockchip,display-subsystem";
|
||||
ports = <&vop_out>;
|
||||
};
|
||||
|
||||
firmware {
|
||||
optee: optee {
|
||||
compatible = "linaro,optee-tz";
|
||||
@ -394,11 +399,6 @@
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
display_subsystem: display-subsystem {
|
||||
compatible = "rockchip,display-subsystem";
|
||||
ports = <&vop_out>;
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
@ -436,6 +436,84 @@
|
||||
};
|
||||
};
|
||||
|
||||
gpu: gpu@fb000000 {
|
||||
compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf";
|
||||
reg = <0x0 0xfb000000 0x0 0x200000>;
|
||||
#cooling-cells = <2>;
|
||||
assigned-clocks = <&scmi_clk SCMI_CLK_GPU>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>,
|
||||
<&cru CLK_GPU_STACKS>;
|
||||
clock-names = "core", "coregroup", "stacks";
|
||||
dynamic-power-coefficient = <2982>;
|
||||
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
interrupt-names = "job", "mmu", "gpu";
|
||||
operating-points-v2 = <&gpu_opp_table>;
|
||||
power-domains = <&power RK3588_PD_GPU>;
|
||||
status = "disabled";
|
||||
|
||||
gpu_opp_table: opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp-300000000 {
|
||||
opp-hz = /bits/ 64 <300000000>;
|
||||
opp-microvolt = <675000 675000 850000>;
|
||||
};
|
||||
opp-400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
opp-microvolt = <675000 675000 850000>;
|
||||
};
|
||||
opp-500000000 {
|
||||
opp-hz = /bits/ 64 <500000000>;
|
||||
opp-microvolt = <675000 675000 850000>;
|
||||
};
|
||||
opp-600000000 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <675000 675000 850000>;
|
||||
};
|
||||
opp-700000000 {
|
||||
opp-hz = /bits/ 64 <700000000>;
|
||||
opp-microvolt = <700000 700000 850000>;
|
||||
};
|
||||
opp-800000000 {
|
||||
opp-hz = /bits/ 64 <800000000>;
|
||||
opp-microvolt = <750000 750000 850000>;
|
||||
};
|
||||
opp-900000000 {
|
||||
opp-hz = /bits/ 64 <900000000>;
|
||||
opp-microvolt = <800000 800000 850000>;
|
||||
};
|
||||
opp-1000000000 {
|
||||
opp-hz = /bits/ 64 <1000000000>;
|
||||
opp-microvolt = <850000 850000 850000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb_host0_xhci: usb@fc000000 {
|
||||
compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
|
||||
reg = <0x0 0xfc000000 0x0 0x400000>;
|
||||
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>,
|
||||
<&cru ACLK_USB3OTG0>;
|
||||
clock-names = "ref_clk", "suspend_clk", "bus_clk";
|
||||
dr_mode = "otg";
|
||||
phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>;
|
||||
phy-names = "usb2-phy", "usb3-phy";
|
||||
phy_type = "utmi_wide";
|
||||
power-domains = <&power RK3588_PD_USB>;
|
||||
resets = <&cru SRST_A_USB3OTG0>;
|
||||
snps,dis_enblslpm_quirk;
|
||||
snps,dis-u1-entry-quirk;
|
||||
snps,dis-u2-entry-quirk;
|
||||
snps,dis-u2-freeclk-exists-quirk;
|
||||
snps,dis-del-phy-power-chg-quirk;
|
||||
snps,dis-tx-ipgap-linecheck-quirk;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_host0_ehci: usb@fc800000 {
|
||||
compatible = "rockchip,rk3588-ehci", "generic-ehci";
|
||||
reg = <0x0 0xfc800000 0x0 0x40000>;
|
||||
@ -516,12 +594,23 @@
|
||||
reg = <0x0 0xfd5a4000 0x0 0x2000>;
|
||||
};
|
||||
|
||||
vo0_grf: syscon@fd5a6000 {
|
||||
compatible = "rockchip,rk3588-vo-grf", "syscon";
|
||||
reg = <0x0 0xfd5a6000 0x0 0x2000>;
|
||||
clocks = <&cru PCLK_VO0GRF>;
|
||||
};
|
||||
|
||||
vo1_grf: syscon@fd5a8000 {
|
||||
compatible = "rockchip,rk3588-vo-grf", "syscon";
|
||||
reg = <0x0 0xfd5a8000 0x0 0x100>;
|
||||
clocks = <&cru PCLK_VO1GRF>;
|
||||
};
|
||||
|
||||
usb_grf: syscon@fd5ac000 {
|
||||
compatible = "rockchip,rk3588-usb-grf", "syscon";
|
||||
reg = <0x0 0xfd5ac000 0x0 0x4000>;
|
||||
};
|
||||
|
||||
php_grf: syscon@fd5b0000 {
|
||||
compatible = "rockchip,rk3588-php-grf", "syscon";
|
||||
reg = <0x0 0xfd5b0000 0x0 0x1000>;
|
||||
@ -537,22 +626,52 @@
|
||||
reg = <0x0 0xfd5c4000 0x0 0x100>;
|
||||
};
|
||||
|
||||
usbdpphy0_grf: syscon@fd5c8000 {
|
||||
compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
|
||||
reg = <0x0 0xfd5c8000 0x0 0x4000>;
|
||||
};
|
||||
|
||||
usb2phy0_grf: syscon@fd5d0000 {
|
||||
compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
|
||||
reg = <0x0 0xfd5d0000 0x0 0x4000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
u2phy0: usb2phy@0 {
|
||||
compatible = "rockchip,rk3588-usb2phy";
|
||||
reg = <0x0 0x10>;
|
||||
#clock-cells = <0>;
|
||||
clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
|
||||
clock-names = "phyclk";
|
||||
clock-output-names = "usb480m_phy0";
|
||||
interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>;
|
||||
reset-names = "phy", "apb";
|
||||
status = "disabled";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
#phy-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb2phy2_grf: syscon@fd5d8000 {
|
||||
compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
|
||||
reg = <0x0 0xfd5d8000 0x0 0x4000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
u2phy2: usb2-phy@8000 {
|
||||
u2phy2: usb2phy@8000 {
|
||||
compatible = "rockchip,rk3588-usb2phy";
|
||||
reg = <0x8000 0x10>;
|
||||
interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>;
|
||||
reset-names = "phy", "apb";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
|
||||
clock-names = "phyclk";
|
||||
clock-output-names = "usb480m_phy2";
|
||||
#clock-cells = <0>;
|
||||
interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>;
|
||||
reset-names = "phy", "apb";
|
||||
status = "disabled";
|
||||
|
||||
u2phy2_host: host-port {
|
||||
@ -568,16 +687,16 @@
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
u2phy3: usb2-phy@c000 {
|
||||
u2phy3: usb2phy@c000 {
|
||||
compatible = "rockchip,rk3588-usb2phy";
|
||||
reg = <0xc000 0x10>;
|
||||
interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>;
|
||||
reset-names = "phy", "apb";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
|
||||
clock-names = "phyclk";
|
||||
clock-output-names = "usb480m_phy3";
|
||||
#clock-cells = <0>;
|
||||
interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>;
|
||||
reset-names = "phy", "apb";
|
||||
status = "disabled";
|
||||
|
||||
u2phy3_host: host-port {
|
||||
@ -646,74 +765,6 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
vop: vop@fdd90000 {
|
||||
compatible = "rockchip,rk3588-vop";
|
||||
reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
|
||||
reg-names = "vop", "gamma-lut";
|
||||
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_VOP>,
|
||||
<&cru HCLK_VOP>,
|
||||
<&cru DCLK_VOP0>,
|
||||
<&cru DCLK_VOP1>,
|
||||
<&cru DCLK_VOP2>,
|
||||
<&cru DCLK_VOP3>,
|
||||
<&cru PCLK_VOP_ROOT>;
|
||||
clock-names = "aclk",
|
||||
"hclk",
|
||||
"dclk_vp0",
|
||||
"dclk_vp1",
|
||||
"dclk_vp2",
|
||||
"dclk_vp3",
|
||||
"pclk_vop";
|
||||
iommus = <&vop_mmu>;
|
||||
power-domains = <&power RK3588_PD_VOP>;
|
||||
rockchip,grf = <&sys_grf>;
|
||||
rockchip,vop-grf = <&vop_grf>;
|
||||
rockchip,vo1-grf = <&vo1_grf>;
|
||||
rockchip,pmu = <&pmu>;
|
||||
status = "disabled";
|
||||
|
||||
vop_out: ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vp0: port@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
vp1: port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
vp2: port@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
vp3: port@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vop_mmu: iommu@fdd97e00 {
|
||||
compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
|
||||
reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
|
||||
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
|
||||
clock-names = "aclk", "iface";
|
||||
#iommu-cells = <0>;
|
||||
power-domains = <&power RK3588_PD_VOP>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart0: serial@fd890000 {
|
||||
compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
|
||||
reg = <0x0 0xfd890000 0x0 0x100>;
|
||||
@ -1084,6 +1135,87 @@
|
||||
};
|
||||
};
|
||||
|
||||
av1d: video-codec@fdc70000 {
|
||||
compatible = "rockchip,rk3588-av1-vpu";
|
||||
reg = <0x0 0xfdc70000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
interrupt-names = "vdpu";
|
||||
assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
|
||||
assigned-clock-rates = <400000000>, <400000000>;
|
||||
clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
|
||||
clock-names = "aclk", "hclk";
|
||||
power-domains = <&power RK3588_PD_AV1>;
|
||||
resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>;
|
||||
};
|
||||
|
||||
vop: vop@fdd90000 {
|
||||
compatible = "rockchip,rk3588-vop";
|
||||
reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
|
||||
reg-names = "vop", "gamma-lut";
|
||||
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_VOP>,
|
||||
<&cru HCLK_VOP>,
|
||||
<&cru DCLK_VOP0>,
|
||||
<&cru DCLK_VOP1>,
|
||||
<&cru DCLK_VOP2>,
|
||||
<&cru DCLK_VOP3>,
|
||||
<&cru PCLK_VOP_ROOT>;
|
||||
clock-names = "aclk",
|
||||
"hclk",
|
||||
"dclk_vp0",
|
||||
"dclk_vp1",
|
||||
"dclk_vp2",
|
||||
"dclk_vp3",
|
||||
"pclk_vop";
|
||||
iommus = <&vop_mmu>;
|
||||
power-domains = <&power RK3588_PD_VOP>;
|
||||
rockchip,grf = <&sys_grf>;
|
||||
rockchip,vop-grf = <&vop_grf>;
|
||||
rockchip,vo1-grf = <&vo1_grf>;
|
||||
rockchip,pmu = <&pmu>;
|
||||
status = "disabled";
|
||||
|
||||
vop_out: ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vp0: port@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
vp1: port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
vp2: port@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
vp3: port@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vop_mmu: iommu@fdd97e00 {
|
||||
compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
|
||||
reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
|
||||
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
|
||||
clock-names = "aclk", "iface";
|
||||
#iommu-cells = <0>;
|
||||
power-domains = <&power RK3588_PD_VOP>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2s4_8ch: i2s@fddc0000 {
|
||||
compatible = "rockchip,rk3588-i2s-tdm";
|
||||
reg = <0x0 0xfddc0000 0x0 0x1000>;
|
||||
@ -1375,6 +1507,16 @@
|
||||
reg = <0x0 0xfdf82200 0x0 0x20>;
|
||||
};
|
||||
|
||||
dfi: dfi@fe060000 {
|
||||
reg = <0x00 0xfe060000 0x00 0x10000>;
|
||||
compatible = "rockchip,rk3588-dfi";
|
||||
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
rockchip,pmu = <&pmu1grf>;
|
||||
};
|
||||
|
||||
pcie2x1l1: pcie@fe180000 {
|
||||
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
|
||||
bus-range = <0x30 0x3f>;
|
||||
@ -1477,16 +1619,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
dfi: dfi@fe060000 {
|
||||
reg = <0x00 0xfe060000 0x00 0x10000>;
|
||||
compatible = "rockchip,rk3588-dfi";
|
||||
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
rockchip,pmu = <&pmu1grf>;
|
||||
};
|
||||
|
||||
gmac1: ethernet@fe1c0000 {
|
||||
compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
|
||||
reg = <0x0 0xfe1c0000 0x0 0x10000>;
|
||||
@ -2380,6 +2512,28 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usbdp_phy0: phy@fed80000 {
|
||||
compatible = "rockchip,rk3588-usbdp-phy";
|
||||
reg = <0x0 0xfed80000 0x0 0x10000>;
|
||||
#phy-cells = <1>;
|
||||
clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
|
||||
<&cru CLK_USBDP_PHY0_IMMORTAL>,
|
||||
<&cru PCLK_USBDPPHY0>,
|
||||
<&u2phy0>;
|
||||
clock-names = "refclk", "immortal", "pclk", "utmi";
|
||||
resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>,
|
||||
<&cru SRST_USBDP_COMBO_PHY0_CMN>,
|
||||
<&cru SRST_USBDP_COMBO_PHY0_LANE>,
|
||||
<&cru SRST_USBDP_COMBO_PHY0_PCS>,
|
||||
<&cru SRST_P_USBDPPHY0>;
|
||||
reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
|
||||
rockchip,u2phy-grf = <&usb2phy0_grf>;
|
||||
rockchip,usb-grf = <&usb_grf>;
|
||||
rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
|
||||
rockchip,vo-grf = <&vo0_grf>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
combphy0_ps: phy@fee00000 {
|
||||
compatible = "rockchip,rk3588-naneng-combphy";
|
||||
reg = <0x0 0xfee00000 0x0 0x100>;
|
||||
@ -2487,19 +2641,6 @@
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
av1d: video-codec@fdc70000 {
|
||||
compatible = "rockchip,rk3588-av1-vpu";
|
||||
reg = <0x0 0xfdc70000 0x0 0x800>;
|
||||
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
interrupt-names = "vdpu";
|
||||
assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
|
||||
assigned-clock-rates = <400000000>, <400000000>;
|
||||
clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
|
||||
clock-names = "aclk", "hclk";
|
||||
power-domains = <&power RK3588_PD_AV1>;
|
||||
resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>;
|
||||
};
|
||||
};
|
||||
|
||||
#include "rk3588s-pinctrl.dtsi"
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user