iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

arcnet: Use normal kernel spacing style

Browse Source 
Standardized spacing is easier to read.

git diff -w shows no differences.
objdiff shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
This commit is contained in:
Joe Perches 2015-05-05 10:05:47 -07:00 committed by Michael Grzeschik
parent 37587fadff
commit cb334648a1
13 changed files with 385 additions and 385 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/net/arcnet/arc-rawmode.c
View File

@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers)
*
*
* Written 1994-1999 by Avery Pennarun.
* Derived from skeleton.c by Donald Becker.
*
@ -109,7 +109,7 @@ static void rx(struct net_device *dev, int bufnum,
skb_put(skb, length + ARC_HDR_SIZE);
skb->dev = dev;
pkt = (struct archdr *) skb->data;
pkt = (struct archdr *)skb->data;
skb_reset_mac_header(skb);
skb_pull(skb, ARC_HDR_SIZE);
@ -136,7 +136,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type, uint8_t daddr)
{
int hdr_size = ARC_HDR_SIZE;
struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
/*
* Set the source hardware address.
@ -150,7 +150,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
/* see linux/net/ethernet/eth.c to see where I got the following */
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
/*
/*
* FIXME: fill in the last byte of the dest ipaddr here to better
* comply with RFC1051 in "noarp" mode.
*/
@ -192,7 +192,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
hard->offset[0] = ofs = 256 - length;
BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n",
length,ofs);
length, ofs);
lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);

30
drivers/net/arcnet/arc-rimi.c
View File

@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - "RIM I" (entirely mem-mapped) cards
*
*
* Written 1994-1999 by Avery Pennarun.
* Written 1999-2000 by Martin Mares <mj@ucw.cz>.
* Derived from skeleton.c by Donald Becker.
@ -56,27 +56,27 @@ static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offse
/* Handy defines for ARCnet specific stuff */
/* Amount of I/O memory used by the card */
#define BUFFER_SIZE (512)
#define MIRROR_SIZE (BUFFER_SIZE*4)
#define BUFFER_SIZE (512)
#define MIRROR_SIZE (BUFFER_SIZE * 4)
/* COM 9026 controller chip --> ARCnet register addresses */
#define _INTMASK (ioaddr+0) /* writable */
#define _STATUS (ioaddr+0) /* readable */
#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */
#define _RESET (ioaddr+8) /* software reset (on read) */
#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */
#define _ADDR_HI (ioaddr+15) /* Control registers for said */
#define _ADDR_LO (ioaddr+14)
#define _CONFIG (ioaddr+2) /* Configuration register */
#define _INTMASK (ioaddr + 0) /* writable */
#define _STATUS (ioaddr + 0) /* readable */
#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */
#define _RESET (ioaddr + 8) /* software reset (on read) */
#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */
#define _ADDR_HI (ioaddr + 15) /* Control registers for said */
#define _ADDR_LO (ioaddr + 14)
#define _CONFIG (ioaddr + 2) /* Configuration register */
#undef ASTATUS
#undef ACOMMAND
#undef AINTMASK
#define ASTATUS() readb(_STATUS)
#define ACOMMAND(cmd) writeb((cmd),_COMMAND)
#define AINTMASK(msk) writeb((msk),_INTMASK)
#define SETCONF() writeb(lp->config,_CONFIG)
#define ACOMMAND(cmd) writeb((cmd), _COMMAND)
#define AINTMASK(msk) writeb((msk), _INTMASK)
#define SETCONF() writeb(lp->config, _CONFIG)
/*
@ -90,7 +90,7 @@ static int __init arcrimi_probe(struct net_device *dev)
BUGLVL(D_NORMAL) printk("E-mail me if you actually test the RIM I driver, please!\n");
BUGLVL(D_NORMAL) printk("Given: node %02Xh, shmem %lXh, irq %d\n",
dev->dev_addr[0], dev->mem_start, dev->irq);
dev->dev_addr[0], dev->mem_start, dev->irq);
if (dev->mem_start <= 0 || dev->irq <= 0) {
BUGLVL(D_NORMAL) printk("No autoprobe for RIM I; you "

168
drivers/net/arcnet/arcnet.c
View File

@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - device-independent routines
*
*
* Written 1997 by David Woodhouse.
* Written 1994-1999 by Avery Pennarun.
* Written 1999-2000 by Martin Mares <mj@ucw.cz>.
@ -20,12 +20,12 @@
* modified by SRC, incorporated herein by reference.
*
* **********************
*
*
* The change log is now in a file called ChangeLog in this directory.
*
* Sources:
* - Crynwr arcnet.com/arcether.com packet drivers.
* - arcnet.c v0.00 dated 1/1/94 and apparently by
* - arcnet.c v0.00 dated 1/1/94 and apparently by
* Donald Becker - it didn't work :)
* - skeleton.c v0.05 dated 11/16/93 by Donald Becker
* (from Linux Kernel 1.1.45)
@ -69,8 +69,8 @@ static void arcnet_rx(struct net_device *dev, int bufnum);
* arc_proto_default instead. It also must not be NULL; if you would like
* to set it to NULL, set it to &arc_proto_null instead.
*/
struct ArcProto *arc_proto_map[256], *arc_proto_default,
*arc_bcast_proto, *arc_raw_proto;
struct ArcProto *arc_proto_map[256], *arc_proto_default,
*arc_bcast_proto, *arc_raw_proto;
static struct ArcProto arc_proto_null =
{
@ -136,8 +136,8 @@ static int __init arcnet_init(void)
BUGLVL(D_DURING)
printk("arcnet: struct sizes: %Zd %Zd %Zd %Zd %Zd\n",
sizeof(struct arc_hardware), sizeof(struct arc_rfc1201),
sizeof(struct arc_rfc1051), sizeof(struct arc_eth_encap),
sizeof(struct arc_hardware), sizeof(struct arc_rfc1201),
sizeof(struct arc_rfc1051), sizeof(struct arc_eth_encap),
sizeof(struct archdr));
return 0;
@ -184,11 +184,11 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum,
/* hw.copy_from_card expects IRQ context so take the IRQ lock
to keep it single threaded */
if(take_arcnet_lock)
if (take_arcnet_lock)
spin_lock_irqsave(&lp->lock, flags);
lp->hw.copy_from_card(dev, bufnum, 0, buf, 512);
if(take_arcnet_lock)
if (take_arcnet_lock)
spin_unlock_irqrestore(&lp->lock, flags);
/* if the offset[0] byte is nonzero, this is a 256-byte packet */
@ -202,7 +202,7 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum,
#else
#define arcnet_dump_packet(dev, bufnum, desc,take_arcnet_lock) do { } while (0)
#define arcnet_dump_packet(dev, bufnum, desc, take_arcnet_lock) do { } while (0)
#endif
@ -233,7 +233,7 @@ void arcnet_unregister_proto(struct ArcProto *proto)
/*
* Add a buffer to the queue. Only the interrupt handler is allowed to do
* this, unless interrupts are disabled.
*
*
* Note: we don't check for a full queue, since there aren't enough buffers
* to more than fill it.
*/
@ -248,7 +248,7 @@ static void release_arcbuf(struct net_device *dev, int bufnum)
BUGLVL(D_DURING) {
BUGMSG(D_DURING, "release_arcbuf: freed #%d; buffer queue is now: ",
bufnum);
for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5)
for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5)
BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]);
BUGMSG2(D_DURING, "\n");
}
@ -284,7 +284,7 @@ static int get_arcbuf(struct net_device *dev)
BUGLVL(D_DURING) {
BUGMSG(D_DURING, "get_arcbuf: got #%d; buffer queue is now: ", buf);
for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5)
for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5)
BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]);
BUGMSG2(D_DURING, "\n");
}
@ -346,7 +346,7 @@ struct net_device *alloc_arcdev(const char *name)
dev = alloc_netdev(sizeof(struct arcnet_local),
name && *name ? name : "arc%d", NET_NAME_UNKNOWN,
arcdev_setup);
if(dev) {
if (dev) {
struct arcnet_local *lp = netdev_priv(dev);
spin_lock_init(&lp->lock);
}
@ -367,7 +367,7 @@ int arcnet_open(struct net_device *dev)
struct arcnet_local *lp = netdev_priv(dev);
int count, newmtu, error;
BUGMSG(D_INIT,"opened.");
BUGMSG(D_INIT, "opened.");
if (!try_module_get(lp->hw.owner))
return -ENODEV;
@ -431,24 +431,24 @@ int arcnet_open(struct net_device *dev)
BUGMSG(D_NORMAL, "WARNING! Station address FF may confuse "
"DOS networking programs!\n");
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
if (ASTATUS() & RESETflag) {
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
ACOMMAND(CFLAGScmd | RESETclear);
}
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
/* make sure we're ready to receive IRQ's. */
AINTMASK(0);
udelay(1); /* give it time to set the mask before
* we reset it again. (may not even be
* necessary)
*/
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
lp->intmask = NORXflag | RECONflag;
AINTMASK(lp->intmask);
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
netif_start_queue(dev);
@ -489,29 +489,29 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
struct ArcProto *proto;
BUGMSG(D_DURING,
"create header from %d to %d; protocol %d (%Xh); size %u.\n",
saddr ? *(uint8_t *) saddr : -1,
daddr ? *(uint8_t *) daddr : -1,
"create header from %d to %d; protocol %d (%Xh); size %u.\n",
saddr ? *(uint8_t *)saddr : -1,
daddr ? *(uint8_t *)daddr : -1,
type, type, len);
if (skb->len!=0 && len != skb->len)
if (skb->len != 0 && len != skb->len)
BUGMSG(D_NORMAL, "arcnet_header: Yikes! skb->len(%d) != len(%d)!\n",
skb->len, len);
/* Type is host order - ? */
if(type == ETH_P_ARCNET) {
proto = arc_raw_proto;
BUGMSG(D_DEBUG, "arc_raw_proto used. proto='%c'\n",proto->suffix);
_daddr = daddr ? *(uint8_t *) daddr : 0;
}
/* Type is host order - ? */
if (type == ETH_P_ARCNET) {
proto = arc_raw_proto;
BUGMSG(D_DEBUG, "arc_raw_proto used. proto='%c'\n", proto->suffix);
_daddr = daddr ? *(uint8_t *)daddr : 0;
}
else if (!daddr) {
/*
* if the dest addr isn't provided, we can't choose an encapsulation!
* Store the packet type (eg. ETH_P_IP) for now, and we'll push on a
* real header when we do rebuild_header.
*/
*(uint16_t *) skb_push(skb, 2) = type;
*(uint16_t *)skb_push(skb, 2) = type;
/*
* XXX: Why not use skb->mac_len?
*/
@ -522,7 +522,7 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
}
else {
/* otherwise, we can just add the header as usual. */
_daddr = *(uint8_t *) daddr;
_daddr = *(uint8_t *)daddr;
proto_num = lp->default_proto[_daddr];
proto = arc_proto_map[proto_num];
BUGMSG(D_DURING, "building header for %02Xh using protocol '%c'\n",
@ -538,7 +538,7 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
/* Called by the kernel in order to transmit a packet. */
netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
struct net_device *dev)
struct net_device *dev)
{
struct arcnet_local *lp = netdev_priv(dev);
struct archdr *pkt;
@ -550,14 +550,14 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
BUGMSG(D_DURING,
"transmit requested (status=%Xh, txbufs=%d/%d, len=%d, protocol %x)\n",
ASTATUS(), lp->cur_tx, lp->next_tx, skb->len,skb->protocol);
ASTATUS(), lp->cur_tx, lp->next_tx, skb->len, skb->protocol);
pkt = (struct archdr *) skb->data;
pkt = (struct archdr *)skb->data;
soft = &pkt->soft.rfc1201;
proto = arc_proto_map[soft->proto];
BUGMSG(D_SKB_SIZE, "skb: transmitting %d bytes to %02X\n",
skb->len, pkt->hard.dest);
skb->len, pkt->hard.dest);
BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "tx");
/* fits in one packet? */
@ -572,7 +572,7 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
spin_lock_irqsave(&lp->lock, flags);
AINTMASK(0);
if(lp->next_tx == -1)
if (lp->next_tx == -1)
txbuf = get_arcbuf(dev);
else {
txbuf = -1;
@ -594,9 +594,9 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
if (proto->continue_tx &&
proto->continue_tx(dev, txbuf)) {
BUGMSG(D_NORMAL,
"bug! continue_tx finished the first time! "
"(proto='%c')\n", proto->suffix);
BUGMSG(D_NORMAL,
"bug! continue_tx finished the first time! "
"(proto='%c')\n", proto->suffix);
}
}
retval = NETDEV_TX_OK;
@ -606,14 +606,14 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
freeskb = 0;
}
BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS());
BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n", __FILE__, __LINE__, __func__, ASTATUS());
/* make sure we didn't ignore a TX IRQ while we were in here */
AINTMASK(0);
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
lp->intmask |= TXFREEflag|EXCNAKflag;
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
lp->intmask |= TXFREEflag | EXCNAKflag;
AINTMASK(lp->intmask);
BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS());
BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n", __FILE__, __LINE__, __func__, ASTATUS());
spin_unlock_irqrestore(&lp->lock, flags);
if (freeskb) {
@ -649,7 +649,7 @@ static int go_tx(struct net_device *dev)
lp->lasttrans_dest = lp->lastload_dest;
lp->lastload_dest = 0;
lp->excnak_pending = 0;
lp->intmask |= TXFREEflag|EXCNAKflag;
lp->intmask |= TXFREEflag | EXCNAKflag;
return 1;
}
@ -676,12 +676,12 @@ void arcnet_timeout(struct net_device *dev)
/* make sure we didn't miss a TX or a EXC NAK IRQ */
AINTMASK(0);
lp->intmask |= TXFREEflag|EXCNAKflag;
lp->intmask |= TXFREEflag | EXCNAKflag;
AINTMASK(lp->intmask);
spin_unlock_irqrestore(&lp->lock, flags);
if (time_after(jiffies, lp->last_timeout + 10*HZ)) {
if (time_after(jiffies, lp->last_timeout + 10 * HZ)) {
BUGMSG(D_EXTRA, "tx timed out%s (status=%Xh, intmask=%Xh, dest=%02Xh)\n",
msg, status, lp->intmask, lp->lasttrans_dest);
lp->last_timeout = jiffies;
@ -710,7 +710,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
lp = netdev_priv(dev);
BUG_ON(!lp);
spin_lock(&lp->lock);
/*
@ -731,16 +731,16 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
boguscount = 5;
do {
status = ASTATUS();
diagstatus = (status >> 8) & 0xFF;
diagstatus = (status >> 8) & 0xFF;
BUGMSG(D_DEBUG, "%s: %d: %s: status=%x\n",
__FILE__,__LINE__,__func__,status);
__FILE__, __LINE__, __func__, status);
didsomething = 0;
/*
* RESET flag was enabled - card is resetting and if RX is
* disabled, it's NOT because we just got a packet.
*
*
* The card is in an undefined state. Clear it out and start over.
*/
if (status & RESETflag) {
@ -751,14 +751,14 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
/* get out of the interrupt handler! */
break;
}
/*
/*
* RX is inhibited - we must have received something. Prepare to
* receive into the next buffer.
*
*
* We don't actually copy the received packet from the card until
* after the transmit handler runs (and possibly launches the next
* tx); this should improve latency slightly if we get both types
* of interrupts at once.
* of interrupts at once.
*/
recbuf = -1;
if (status & lp->intmask & NORXflag) {
@ -775,27 +775,27 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
didsomething++;
}
if((diagstatus & EXCNAKflag)) {
if ((diagstatus & EXCNAKflag)) {
BUGMSG(D_DURING, "EXCNAK IRQ (diagstat=%Xh)\n",
diagstatus);
ACOMMAND(NOTXcmd); /* disable transmit */
lp->excnak_pending = 1;
ACOMMAND(NOTXcmd); /* disable transmit */
lp->excnak_pending = 1;
ACOMMAND(EXCNAKclear);
ACOMMAND(EXCNAKclear);
lp->intmask &= ~(EXCNAKflag);
didsomething++;
}
didsomething++;
}
/* a transmit finished, and we're interested in it. */
if ((status & lp->intmask & TXFREEflag) || lp->timed_out) {
lp->intmask &= ~(TXFREEflag|EXCNAKflag);
lp->intmask &= ~(TXFREEflag | EXCNAKflag);
BUGMSG(D_DURING, "TX IRQ (stat=%Xh)\n", status);
if (lp->cur_tx != -1 && !lp->timed_out) {
if(!(status & TXACKflag)) {
if (!(status & TXACKflag)) {
if (lp->lasttrans_dest != 0) {
BUGMSG(D_EXTRA,
"transmit was not acknowledged! "
@ -813,16 +813,16 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
if (lp->outgoing.proto &&
lp->outgoing.proto->ack_tx) {
int ackstatus;
if(status & TXACKflag)
ackstatus=2;
else if(lp->excnak_pending)
ackstatus=1;
else
ackstatus=0;
int ackstatus;
if (status & TXACKflag)
ackstatus = 2;
else if (lp->excnak_pending)
ackstatus = 1;
else
ackstatus = 0;
lp->outgoing.proto
->ack_tx(dev, ackstatus);
lp->outgoing.proto
->ack_tx(dev, ackstatus);
}
}
if (lp->cur_tx != -1)
@ -842,11 +842,11 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
if (lp->outgoing.proto->continue_tx(dev, txbuf)) {
/* that was the last segment */
dev->stats.tx_bytes += lp->outgoing.skb->len;
if(!lp->outgoing.proto->ack_tx)
{
dev_kfree_skb_irq(lp->outgoing.skb);
lp->outgoing.proto = NULL;
}
if (!lp->outgoing.proto->ack_tx)
{
dev_kfree_skb_irq(lp->outgoing.skb);
lp->outgoing.proto = NULL;
}
}
lp->next_tx = txbuf;
}
@ -871,8 +871,8 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
BUGMSG(D_RECON, "Network reconfiguration detected (status=%Xh)\n",
status);
/* MYRECON bit is at bit 7 of diagstatus */
if(diagstatus & 0x80)
BUGMSG(D_RECON,"Put out that recon myself\n");
if (diagstatus & 0x80)
BUGMSG(D_RECON, "Put out that recon myself\n");
/* is the RECON info empty or old? */
if (!lp->first_recon || !lp->last_recon ||
@ -889,7 +889,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
BUGMSG(D_DURING, "recon: counter=%d, time=%lds, net=%d\n",
lp->num_recons,
(lp->last_recon - lp->first_recon) / HZ,
(lp->last_recon - lp->first_recon) / HZ,
lp->network_down);
/* if network is marked up;
@ -911,7 +911,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
}
}
} else if (lp->network_down &&
time_after(jiffies, lp->last_recon + HZ * 10)) {
time_after(jiffies, lp->last_recon + HZ * 10)) {
if (lp->network_down)
BUGMSG(D_NORMAL, "cabling restored?\n");
lp->first_recon = lp->last_recon = 0;
@ -920,7 +920,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
BUGMSG(D_DURING, "not recon: clearing counters anyway.\n");
}
if(didsomething) {
if (didsomething) {
retval |= IRQ_HANDLED;
}
}
@ -934,7 +934,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
AINTMASK(0);
udelay(1);
AINTMASK(lp->intmask);
spin_unlock(&lp->lock);
return retval;
}
@ -1007,7 +1007,7 @@ static void null_rx(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length)
{
BUGMSG(D_PROTO,
"rx: don't know how to deal with proto %02Xh from host %02Xh.\n",
"rx: don't know how to deal with proto %02Xh from host %02Xh.\n",
pkthdr->soft.rfc1201.proto, pkthdr->hard.source);
}

36
drivers/net/arcnet/capmode.c
View File

@ -71,12 +71,12 @@ static void rx(struct net_device *dev, int bufnum,
/* use these variables to be sure we count in bytes, not in
sizeof(struct archdr) */
pktbuf=(char*)pkt;
pkthdrbuf=(char*)pkthdr;
memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto));
memcpy(pktbuf+ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto)+sizeof(int),
pkthdrbuf+ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto),
sizeof(struct archdr)-ARC_HDR_SIZE-sizeof(pkt->soft.cap.proto));
pktbuf = (char *)pkt;
pkthdrbuf = (char *)pkthdr;
memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto));
memcpy(pktbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto) + sizeof(int),
pkthdrbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto),
sizeof(struct archdr) - ARC_HDR_SIZE - sizeof(pkt->soft.cap.proto));
if (length > sizeof(pkt->soft))
lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
@ -101,10 +101,10 @@ static int build_header(struct sk_buff *skb,
uint8_t daddr)
{
int hdr_size = ARC_HDR_SIZE;
struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
BUGMSG(D_PROTO, "Preparing header for cap packet %x.\n",
*((int*)&pkt->soft.cap.cookie[0]));
*((int *)&pkt->soft.cap.cookie[0]));
/*
* Set the source hardware address.
*
@ -148,7 +148,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
lp->next_tx, lp->cur_tx, bufnum);
BUGMSG(D_PROTO, "Sending for cap packet %x.\n",
*((int*)&pkt->soft.cap.cookie[0]));
*((int *)&pkt->soft.cap.cookie[0]));
if (length > XMTU) {
/* should never happen! other people already check for this. */
@ -166,7 +166,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
hard->offset[0] = ofs = 256 - length;
BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n",
length,ofs);
length, ofs);
/* Copy the arcnet-header + the protocol byte down: */
lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
@ -175,8 +175,8 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
/* Skip the extra integer we have written into it as a cookie
but write the rest of the message: */
lp->hw.copy_to_card(dev, bufnum, ofs+1,
((unsigned char*)&pkt->soft.cap.mes),length-1);
lp->hw.copy_to_card(dev, bufnum, ofs + 1,
((unsigned char *)&pkt->soft.cap.mes), length - 1);
lp->lastload_dest = hard->dest;
@ -188,21 +188,21 @@ static int ack_tx(struct net_device *dev, int acked)
struct arcnet_local *lp = netdev_priv(dev);
struct sk_buff *ackskb;
struct archdr *ackpkt;
int length=sizeof(struct arc_cap);
int length = sizeof(struct arc_cap);
BUGMSG(D_DURING, "capmode: ack_tx: protocol: %x: result: %d\n",
lp->outgoing.skb->protocol, acked);
lp->outgoing.skb->protocol, acked);
BUGLVL(D_SKB) arcnet_dump_skb(dev, lp->outgoing.skb, "ack_tx");
/* Now alloc a skb to send back up through the layers: */
ackskb = alloc_skb(length + ARC_HDR_SIZE , GFP_ATOMIC);
ackskb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
if (ackskb == NULL) {
BUGMSG(D_NORMAL, "Memory squeeze, can't acknowledge.\n");
goto free_outskb;
}
skb_put(ackskb, length + ARC_HDR_SIZE );
skb_put(ackskb, length + ARC_HDR_SIZE);
ackskb->dev = dev;
skb_reset_mac_header(ackskb);
@ -212,10 +212,10 @@ static int ack_tx(struct net_device *dev, int acked)
skb_copy_from_linear_data(lp->outgoing.skb, ackpkt,
ARC_HDR_SIZE + sizeof(struct arc_cap));
ackpkt->soft.cap.proto = 0; /* using protocol 0 for acknowledge */
ackpkt->soft.cap.mes.ack=acked;
ackpkt->soft.cap.mes.ack = acked;
BUGMSG(D_PROTO, "Ackknowledge for cap packet %x.\n",
*((int*)&ackpkt->soft.cap.cookie[0]));
*((int *)&ackpkt->soft.cap.cookie[0]));
ackskb->protocol = cpu_to_be16(ETH_P_ARCNET);

2
drivers/net/arcnet/com20020-isa.c
View File

@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - COM20020 chipset support
*
*
* Written 1997 by David Woodhouse.
* Written 1994-1999 by Avery Pennarun.
* Written 1999-2000 by Martin Mares <mj@ucw.cz>.

2
drivers/net/arcnet/com20020-pci.c
View File

@ -1,7 +1,7 @@
/*
* Linux ARCnet driver - COM20020 PCI support
* Contemporary Controls PCI20 and SOHARD SH-ARC PCI
*
*
* Written 1994-1999 by Avery Pennarun,
* based on an ISA version by David Woodhouse.
* Written 1999-2000 by Martin Mares <mj@ucw.cz>.

38
drivers/net/arcnet/com20020.c
View File

@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - COM20020 chipset support
*
*
* Written 1997 by David Woodhouse.
* Written 1994-1999 by Avery Pennarun.
* Written 1999 by Martin Mares <mj@ucw.cz>.
@ -108,7 +108,7 @@ int com20020_check(struct net_device *dev)
{
SET_SUBADR(SUB_SETUP2);
outb(lp->setup2, _XREG);
/* must now write the magic "restart operation" command */
mdelay(1);
outb(0x18, _COMMAND);
@ -117,7 +117,7 @@ int com20020_check(struct net_device *dev)
lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2);
/* set node ID to 0x42 (but transmitter is disabled, so it's okay) */
SETCONF;
outb(0x42, ioaddr + BUS_ALIGN*7);
outb(0x42, ioaddr + BUS_ALIGN * 7);
status = ASTATUS();
@ -129,7 +129,7 @@ int com20020_check(struct net_device *dev)
/* Enable TX */
outb(0x39, _CONFIG);
outb(inb(ioaddr + BUS_ALIGN*8), ioaddr + BUS_ALIGN*7);
outb(inb(ioaddr + BUS_ALIGN * 8), ioaddr + BUS_ALIGN * 7);
ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
@ -193,7 +193,7 @@ int com20020_found(struct net_device *dev, int shared)
lp->hw.close = com20020_close;
if (!dev->dev_addr[0])
dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN*8); /* FIXME: do this some other way! */
dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN * 8); /* FIXME: do this some other way! */
SET_SUBADR(SUB_SETUP1);
outb(lp->setup, _XREG);
@ -202,7 +202,7 @@ int com20020_found(struct net_device *dev, int shared)
{
SET_SUBADR(SUB_SETUP2);
outb(lp->setup2, _XREG);
/* must now write the magic "restart operation" command */
mdelay(1);
outb(0x18, _COMMAND);
@ -232,7 +232,7 @@ int com20020_found(struct net_device *dev, int shared)
BUGMSG(D_NORMAL, "Using extended timeout value of %d.\n", lp->timeout);
BUGMSG(D_NORMAL, "Using CKP %d - data rate %s.\n",
lp->setup >> 1,
lp->setup >> 1,
clockrates[3 - ((lp->setup2 & 0xF0) >> 4) + ((lp->setup & 0x0F) >> 1)]);
if (register_netdev(dev)) {
@ -243,9 +243,9 @@ int com20020_found(struct net_device *dev, int shared)
}
/*
/*
* Do a hardware reset on the card, and set up necessary registers.
*
*
* This should be called as little as possible, because it disrupts the
* token on the network (causes a RECON) and requires a significant delay.
*
@ -258,15 +258,15 @@ static int com20020_reset(struct net_device *dev, int really_reset)
u_char inbyte;
BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
__FILE__,__LINE__,__func__,dev,lp,dev->name);
__FILE__, __LINE__, __func__, dev, lp, dev->name);
BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n",
dev->name, ASTATUS());
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2);
/* power-up defaults */
SETCONF;
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
if (really_reset) {
/* reset the card */
@ -274,22 +274,22 @@ static int com20020_reset(struct net_device *dev, int really_reset)
mdelay(RESETtime * 2); /* COM20020 seems to be slower sometimes */
}
/* clear flags & end reset */
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
/* verify that the ARCnet signature byte is present */
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
if (inbyte != TESTvalue) {
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n");
return 1;
}
/* enable extended (512-byte) packets */
ACOMMAND(CONFIGcmd | EXTconf);
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
/* done! return success. */
return 0;
@ -299,7 +299,7 @@ static int com20020_reset(struct net_device *dev, int really_reset)
static void com20020_setmask(struct net_device *dev, int mask)
{
u_int ioaddr = dev->base_addr;
BUGMSG(D_DURING, "Setting mask to %x at %x\n",mask,ioaddr);
BUGMSG(D_DURING, "Setting mask to %x at %x\n", mask, ioaddr);
AINTMASK(mask);
}
@ -315,7 +315,7 @@ static int com20020_status(struct net_device *dev)
{
u_int ioaddr = dev->base_addr;
return ASTATUS() + (ADIAGSTATUS()<<8);
return ASTATUS() + (ADIAGSTATUS() << 8);
}
static void com20020_close(struct net_device *dev)

292
drivers/net/arcnet/com20020_cs.c
View File

@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - COM20020 PCMCIA support
*
*
* Written 1994-1999 by Avery Pennarun,
* based on an ISA version by David Woodhouse.
* Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
@ -19,14 +19,14 @@
* Director, National Security Agency. This software may only be used
* and distributed according to the terms of the GNU General Public License as
* modified by SRC, incorporated herein by reference.
*
*
* **********************
* Changes:
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
* - reorganize kmallocs in com20020_attach, checking all for failure
* and releasing the previous allocations if one fails
* **********************
*
*
* For more details, see drivers/net/arcnet.c
*
* **********************
@ -53,33 +53,33 @@
static void regdump(struct net_device *dev)
{
#ifdef DEBUG
int ioaddr = dev->base_addr;
int count;
netdev_dbg(dev, "register dump:\n");
for (count = ioaddr; count < ioaddr + 16; count++)
{
if (!(count % 16))
pr_cont("%04X:", count);
pr_cont(" %02X", inb(count));
}
pr_cont("\n");
netdev_dbg(dev, "buffer0 dump:\n");
int ioaddr = dev->base_addr;
int count;
netdev_dbg(dev, "register dump:\n");
for (count = ioaddr; count < ioaddr + 16; count++)
{
if (!(count % 16))
pr_cont("%04X:", count);
pr_cont(" %02X", inb(count));
}
pr_cont("\n");
netdev_dbg(dev, "buffer0 dump:\n");
/* set up the address register */
count = 0;
count = 0;
outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
outb(count & 0xff, _ADDR_LO);
for (count = 0; count < 256+32; count++)
{
if (!(count % 16))
pr_cont("%04X:", count);
/* copy the data */
pr_cont(" %02X", inb(_MEMDATA));
}
pr_cont("\n");
for (count = 0; count < 256 + 32; count++)
{
if (!(count % 16))
pr_cont("%04X:", count);
/* copy the data */
pr_cont(" %02X", inb(_MEMDATA));
}
pr_cont("\n");
#endif
}
@ -114,169 +114,169 @@ static void com20020_detach(struct pcmcia_device *p_dev);
static int com20020_probe(struct pcmcia_device *p_dev)
{
struct com20020_dev *info;
struct net_device *dev;
struct arcnet_local *lp;
struct com20020_dev *info;
struct net_device *dev;
struct arcnet_local *lp;
dev_dbg(&p_dev->dev, "com20020_attach()\n");
dev_dbg(&p_dev->dev, "com20020_attach()\n");
/* Create new network device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
goto fail_alloc_info;
/* Create new network device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
goto fail_alloc_info;
dev = alloc_arcdev("");
if (!dev)
goto fail_alloc_dev;
dev = alloc_arcdev("");
if (!dev)
goto fail_alloc_dev;
lp = netdev_priv(dev);
lp->timeout = timeout;
lp->backplane = backplane;
lp->clockp = clockp;
lp->clockm = clockm & 3;
lp->hw.owner = THIS_MODULE;
lp = netdev_priv(dev);
lp->timeout = timeout;
lp->backplane = backplane;
lp->clockp = clockp;
lp->clockm = clockm & 3;
lp->hw.owner = THIS_MODULE;
/* fill in our module parameters as defaults */
dev->dev_addr[0] = node;
/* fill in our module parameters as defaults */
dev->dev_addr[0] = node;
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
p_dev->resource[0]->end = 16;
p_dev->config_flags |= CONF_ENABLE_IRQ;
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
p_dev->resource[0]->end = 16;
p_dev->config_flags |= CONF_ENABLE_IRQ;
info->dev = dev;
p_dev->priv = info;
info->dev = dev;
p_dev->priv = info;
return com20020_config(p_dev);
return com20020_config(p_dev);
fail_alloc_dev:
kfree(info);
kfree(info);
fail_alloc_info:
return -ENOMEM;
return -ENOMEM;
} /* com20020_attach */
static void com20020_detach(struct pcmcia_device *link)
{
struct com20020_dev *info = link->priv;
struct net_device *dev = info->dev;
struct com20020_dev *info = link->priv;
struct net_device *dev = info->dev;
dev_dbg(&link->dev, "detach...\n");
dev_dbg(&link->dev, "detach...\n");
dev_dbg(&link->dev, "com20020_detach\n");
dev_dbg(&link->dev, "com20020_detach\n");
dev_dbg(&link->dev, "unregister...\n");
dev_dbg(&link->dev, "unregister...\n");
unregister_netdev(dev);
unregister_netdev(dev);
/*
* this is necessary because we register our IRQ separately
* from card services.
*/
if (dev->irq)
free_irq(dev->irq, dev);
/*
* this is necessary because we register our IRQ separately
* from card services.
*/
if (dev->irq)
free_irq(dev->irq, dev);
com20020_release(link);
com20020_release(link);
/* Unlink device structure, free bits */
dev_dbg(&link->dev, "unlinking...\n");
if (link->priv)
{
dev = info->dev;
if (dev)
/* Unlink device structure, free bits */
dev_dbg(&link->dev, "unlinking...\n");
if (link->priv)
{
dev_dbg(&link->dev, "kfree...\n");
free_netdev(dev);
dev = info->dev;
if (dev)
{
dev_dbg(&link->dev, "kfree...\n");
free_netdev(dev);
}
dev_dbg(&link->dev, "kfree2...\n");
kfree(info);
}
dev_dbg(&link->dev, "kfree2...\n");
kfree(info);
}
} /* com20020_detach */
static int com20020_config(struct pcmcia_device *link)
{
struct arcnet_local *lp;
struct com20020_dev *info;
struct net_device *dev;
int i, ret;
int ioaddr;
struct arcnet_local *lp;
struct com20020_dev *info;
struct net_device *dev;
int i, ret;
int ioaddr;
info = link->priv;
dev = info->dev;
info = link->priv;
dev = info->dev;
dev_dbg(&link->dev, "config...\n");
dev_dbg(&link->dev, "config...\n");
dev_dbg(&link->dev, "com20020_config\n");
dev_dbg(&link->dev, "com20020_config\n");
dev_dbg(&link->dev, "baseport1 is %Xh\n",
(unsigned int) link->resource[0]->start);
dev_dbg(&link->dev, "baseport1 is %Xh\n",
(unsigned int)link->resource[0]->start);
i = -ENODEV;
link->io_lines = 16;
i = -ENODEV;
link->io_lines = 16;
if (!link->resource[0]->start)
{
for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
if (!link->resource[0]->start)
{
link->resource[0]->start = ioaddr;
i = pcmcia_request_io(link);
if (i == 0)
break;
for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
{
link->resource[0]->start = ioaddr;
i = pcmcia_request_io(link);
if (i == 0)
break;
}
}
}
else
i = pcmcia_request_io(link);
if (i != 0)
{
dev_dbg(&link->dev, "requestIO failed totally!\n");
goto failed;
}
ioaddr = dev->base_addr = link->resource[0]->start;
dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
else
i = pcmcia_request_io(link);
dev_dbg(&link->dev, "request IRQ %d\n",
link->irq);
if (!link->irq)
{
dev_dbg(&link->dev, "requestIRQ failed totally!\n");
goto failed;
}
if (i != 0)
{
dev_dbg(&link->dev, "requestIO failed totally!\n");
goto failed;
}
dev->irq = link->irq;
ioaddr = dev->base_addr = link->resource[0]->start;
dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
dev_dbg(&link->dev, "request IRQ %d\n",
link->irq);
if (!link->irq)
{
dev_dbg(&link->dev, "requestIRQ failed totally!\n");
goto failed;
}
if (com20020_check(dev))
{
regdump(dev);
goto failed;
}
lp = netdev_priv(dev);
lp->card_name = "PCMCIA COM20020";
lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
dev->irq = link->irq;
SET_NETDEV_DEV(dev, &link->dev);
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
i = com20020_found(dev, 0); /* calls register_netdev */
if (i != 0) {
dev_notice(&link->dev,
"com20020_found() failed\n");
goto failed;
}
if (com20020_check(dev))
{
regdump(dev);
goto failed;
}
netdev_dbg(dev, "port %#3lx, irq %d\n",
dev->base_addr, dev->irq);
return 0;
lp = netdev_priv(dev);
lp->card_name = "PCMCIA COM20020";
lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
SET_NETDEV_DEV(dev, &link->dev);
i = com20020_found(dev, 0); /* calls register_netdev */
if (i != 0) {
dev_notice(&link->dev,
"com20020_found() failed\n");
goto failed;
}
netdev_dbg(dev, "port %#3lx, irq %d\n",
dev->base_addr, dev->irq);
return 0;
failed:
dev_dbg(&link->dev, "com20020_config failed...\n");
com20020_release(link);
return -ENODEV;
dev_dbg(&link->dev, "com20020_config failed...\n");
com20020_release(link);
return -ENODEV;
} /* com20020_config */
static void com20020_release(struct pcmcia_device *link)
@ -312,9 +312,9 @@ static int com20020_resume(struct pcmcia_device *link)
static const struct pcmcia_device_id com20020_ids[] = {
PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.",
"PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
"PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
PCMCIA_DEVICE_PROD_ID12("SoHard AG",
"SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
"SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, com20020_ids);

24
drivers/net/arcnet/com90io.c
View File

@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - COM90xx chipset (IO-mapped buffers)
*
*
* Written 1997 by David Woodhouse.
* Written 1994-1999 by Avery Pennarun.
* Written 1999-2000 by Martin Mares <mj@ucw.cz>.
@ -60,23 +60,23 @@ static void com90io_copy_from_card(struct net_device *dev, int bufnum, int offse
#define ARCNET_TOTAL_SIZE 16
/* COM 9026 controller chip --> ARCnet register addresses */
#define _INTMASK (ioaddr+0) /* writable */
#define _STATUS (ioaddr+0) /* readable */
#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */
#define _RESET (ioaddr+8) /* software reset (on read) */
#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */
#define _ADDR_HI (ioaddr+15) /* Control registers for said */
#define _ADDR_LO (ioaddr+14)
#define _CONFIG (ioaddr+2) /* Configuration register */
#define _INTMASK (ioaddr + 0) /* writable */
#define _STATUS (ioaddr + 0) /* readable */
#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */
#define _RESET (ioaddr + 8) /* software reset (on read) */
#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */
#define _ADDR_HI (ioaddr + 15) /* Control registers for said */
#define _ADDR_LO (ioaddr + 14)
#define _CONFIG (ioaddr + 2) /* Configuration register */
#undef ASTATUS
#undef ACOMMAND
#undef AINTMASK
#define ASTATUS() inb(_STATUS)
#define ACOMMAND(cmd) outb((cmd),_COMMAND)
#define AINTMASK(msk) outb((msk),_INTMASK)
#define SETCONF() outb((lp->config),_CONFIG)
#define ACOMMAND(cmd) outb((cmd), _COMMAND)
#define AINTMASK(msk) outb((msk), _INTMASK)
#define SETCONF() outb((lp->config), _CONFIG)
/****************************************************************************

32
drivers/net/arcnet/com90xx.c
View File

@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - COM90xx chipset (memory-mapped buffers)
*
*
* Written 1994-1999 by Avery Pennarun.
* Written 1999 by Martin Mares <mj@ucw.cz>.
* Derived from skeleton.c by Donald Becker.
@ -77,25 +77,25 @@ static int numcards;
/* Amount of I/O memory used by the card */
#define BUFFER_SIZE (512)
#define MIRROR_SIZE (BUFFER_SIZE*4)
#define MIRROR_SIZE (BUFFER_SIZE * 4)
/* COM 9026 controller chip --> ARCnet register addresses */
#define _INTMASK (ioaddr+0) /* writable */
#define _STATUS (ioaddr+0) /* readable */
#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */
#define _CONFIG (ioaddr+2) /* Configuration register */
#define _RESET (ioaddr+8) /* software reset (on read) */
#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */
#define _ADDR_HI (ioaddr+15) /* Control registers for said */
#define _ADDR_LO (ioaddr+14)
#define _INTMASK (ioaddr + 0) /* writable */
#define _STATUS (ioaddr + 0) /* readable */
#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */
#define _CONFIG (ioaddr + 2) /* Configuration register */
#define _RESET (ioaddr + 8) /* software reset (on read) */
#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */
#define _ADDR_HI (ioaddr + 15) /* Control registers for said */
#define _ADDR_LO (ioaddr + 14)
#undef ASTATUS
#undef ACOMMAND
#undef AINTMASK
#define ASTATUS() inb(_STATUS)
#define ACOMMAND(cmd) outb((cmd),_COMMAND)
#define AINTMASK(msk) outb((msk),_INTMASK)
#define ACOMMAND(cmd) outb((cmd), _COMMAND)
#define AINTMASK(msk) outb((msk), _INTMASK)
static int com90xx_skip_probe __initdata = 0;
@ -127,12 +127,12 @@ static void __init com90xx_probe(void)
if (!io && !irq && !shmem && !*device && com90xx_skip_probe)
return;
shmems = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(unsigned long),
shmems = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(unsigned long),
GFP_KERNEL);
if (!shmems)
return;
iomem = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(void __iomem *),
GFP_KERNEL);
iomem = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(void __iomem *),
GFP_KERNEL);
if (!iomem) {
kfree(shmems);
return;
@ -579,7 +579,7 @@ static void com90xx_setmask(struct net_device *dev, int mask)
/*
* Do a hardware reset on the card, and set up necessary registers.
*
*
* This should be called as little as possible, because it disrupts the
* token on the network (causes a RECON) and requires a significant delay.
*

12
drivers/net/arcnet/rfc1051.c
View File

@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation
*
*
* Written 1994-1999 by Avery Pennarun.
* Derived from skeleton.c by Donald Becker.
*
@ -84,12 +84,12 @@ MODULE_LICENSE("GPL");
/*
* Determine a packet's protocol ID.
*
*
* With ARCnet we have to convert everything to Ethernet-style stuff.
*/
static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
{
struct archdr *pkt = (struct archdr *) skb->data;
struct archdr *pkt = (struct archdr *)skb->data;
struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
@ -146,7 +146,7 @@ static void rx(struct net_device *dev, int bufnum,
skb_put(skb, length + ARC_HDR_SIZE);
skb->dev = dev;
pkt = (struct archdr *) skb->data;
pkt = (struct archdr *)skb->data;
/* up to sizeof(pkt->soft) has already been copied from the card */
memcpy(pkt, pkthdr, sizeof(struct archdr));
@ -169,7 +169,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type, uint8_t daddr)
{
int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
/* set the protocol ID according to RFC1051 */
@ -201,7 +201,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
/* see linux/net/ethernet/eth.c to see where I got the following */
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
/*
/*
* FIXME: fill in the last byte of the dest ipaddr here to better
* comply with RFC1051 in "noarp" mode.
*/

36
drivers/net/arcnet/rfc1201.c
View File

@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - RFC1201 (standard) packet encapsulation
*
*
* Written 1994-1999 by Avery Pennarun.
* Derived from skeleton.c by Donald Becker.
*
@ -86,12 +86,12 @@ module_exit(arcnet_rfc1201_exit);
/*
* Determine a packet's protocol ID.
*
*
* With ARCnet we have to convert everything to Ethernet-style stuff.
*/
static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
{
struct archdr *pkt = (struct archdr *) skb->data;
struct archdr *pkt = (struct archdr *)skb->data;
struct arc_rfc1201 *soft = &pkt->soft.rfc1201;
int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE;
@ -169,7 +169,7 @@ static void rx(struct net_device *dev, int bufnum,
if (in->skb) { /* already assembling one! */
BUGMSG(D_EXTRA, "aborting assembly (seq=%d) for unsplit packet (splitflag=%d, seq=%d)\n",
in->sequence, soft->split_flag, soft->sequence);
in->sequence, soft->split_flag, soft->sequence);
lp->rfc1201.aborted_seq = soft->sequence;
dev_kfree_skb_irq(in->skb);
dev->stats.rx_errors++;
@ -187,7 +187,7 @@ static void rx(struct net_device *dev, int bufnum,
skb_put(skb, length + ARC_HDR_SIZE);
skb->dev = dev;
pkt = (struct archdr *) skb->data;
pkt = (struct archdr *)skb->data;
soft = &pkt->soft.rfc1201;
/* up to sizeof(pkt->soft) has already been copied from the card */
@ -203,11 +203,11 @@ static void rx(struct net_device *dev, int bufnum,
* (which is impossible to fumble) and insert it ourselves.
*/
if (soft->proto == ARC_P_ARP) {
struct arphdr *arp = (struct arphdr *) soft->payload;
struct arphdr *arp = (struct arphdr *)soft->payload;
/* make sure addresses are the right length */
if (arp->ar_hln == 1 && arp->ar_pln == 4) {
uint8_t *cptr = (uint8_t *) arp + sizeof(struct arphdr);
uint8_t *cptr = (uint8_t *)arp + sizeof(struct arphdr);
if (!*cptr) { /* is saddr = 00? */
BUGMSG(D_EXTRA,
@ -274,7 +274,7 @@ static void rx(struct net_device *dev, int bufnum,
dev_kfree_skb_irq(in->skb);
}
in->sequence = soft->sequence;
in->numpackets = ((unsigned) soft->split_flag >> 1) + 2;
in->numpackets = ((unsigned)soft->split_flag >> 1) + 2;
in->lastpacket = 1;
if (in->numpackets > 16) {
@ -294,7 +294,7 @@ static void rx(struct net_device *dev, int bufnum,
return;
}
skb->dev = dev;
pkt = (struct archdr *) skb->data;
pkt = (struct archdr *)skb->data;
soft = &pkt->soft.rfc1201;
memcpy(pkt, pkthdr, ARC_HDR_SIZE + RFC1201_HDR_SIZE);
@ -302,7 +302,7 @@ static void rx(struct net_device *dev, int bufnum,
soft->split_flag = 0; /* end result won't be split */
} else { /* not first packet */
int packetnum = ((unsigned) soft->split_flag >> 1) + 1;
int packetnum = ((unsigned)soft->split_flag >> 1) + 1;
/*
* if we're not assembling, there's no point trying to
@ -341,7 +341,7 @@ static void rx(struct net_device *dev, int bufnum,
in->lastpacket = in->numpackets = 0;
return;
}
pkt = (struct archdr *) in->skb->data;
pkt = (struct archdr *)in->skb->data;
soft = &pkt->soft.rfc1201;
}
@ -357,10 +357,10 @@ static void rx(struct net_device *dev, int bufnum,
in->skb = NULL;
in->lastpacket = in->numpackets = 0;
BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (unsplit)\n",
skb->len, pkt->hard.source);
BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (split)\n",
skb->len, pkt->hard.source);
BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (unsplit)\n",
skb->len, pkt->hard.source);
BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (split)\n",
skb->len, pkt->hard.source);
BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
skb->protocol = type_trans(skb, dev);
@ -376,7 +376,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
{
struct arcnet_local *lp = netdev_priv(dev);
int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE;
struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
struct arc_rfc1201 *soft = &pkt->soft.rfc1201;
/* set the protocol ID according to RFC1201 */
@ -424,7 +424,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
/* see linux/net/ethernet/eth.c to see where I got the following */
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
/*
/*
* FIXME: fill in the last byte of the dest ipaddr here to better
* comply with RFC1051 in "noarp" mode. For now, always broadcasting
* will probably at least get packets sent out :)
@ -517,7 +517,7 @@ static int continue_tx(struct net_device *dev, int bufnum)
int seglen;
BUGMSG(D_DURING,
"rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n",
"rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n",
out->segnum, out->numsegs, soft->sequence);
/* the "new" soft header comes right before the data chunk */

88
include/linux/arcdevice.h
View File

@ -51,7 +51,7 @@
/*
* Debugging bitflags: each option can be enabled individually.
*
*
* Note: only debug flags included in the ARCNET_DEBUG_MAX define will
* actually be available. GCC will (at least, GCC 2.7.0 will) notice
* lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize
@ -77,33 +77,33 @@
#endif
#ifndef ARCNET_DEBUG
#define ARCNET_DEBUG (D_NORMAL|D_EXTRA)
#define ARCNET_DEBUG (D_NORMAL | D_EXTRA)
#endif
extern int arcnet_debug;
/* macros to simplify debug checking */
#define BUGLVL(x) if ((ARCNET_DEBUG_MAX)&arcnet_debug&(x))
#define BUGMSG2(x,msg,args...) do { BUGLVL(x) printk(msg, ## args); } while (0)
#define BUGMSG(x,msg,args...) \
BUGMSG2(x, "%s%6s: " msg, \
x==D_NORMAL ? KERN_WARNING \
: x < D_DURING ? KERN_INFO : KERN_DEBUG, \
dev->name , ## args)
#define BUGLVL(x) if ((ARCNET_DEBUG_MAX) & arcnet_debug & (x))
#define BUGMSG2(x, msg, args...) do { BUGLVL(x) printk(msg, ## args); } while (0)
#define BUGMSG(x, msg, args...) \
BUGMSG2(x, "%s%6s: " msg, \
x == D_NORMAL ? KERN_WARNING \
: x < D_DURING ? KERN_INFO : KERN_DEBUG, \
dev->name, ## args)
/* see how long a function call takes to run, expressed in CPU cycles */
#define TIME(name, bytes, call) BUGLVL(D_TIMING) { \
unsigned long _x, _y; \
_x = get_cycles(); \
call; \
_y = get_cycles(); \
BUGMSG(D_TIMING, \
"%s: %d bytes in %lu cycles == " \
"%lu Kbytes/100Mcycle\n",\
name, bytes, _y - _x, \
100000000 / 1024 * bytes / (_y - _x + 1));\
} \
else { \
call;\
#define TIME(name, bytes, call) BUGLVL(D_TIMING) { \
unsigned long _x, _y; \
_x = get_cycles(); \
call; \
_y = get_cycles(); \
BUGMSG(D_TIMING, \
"%s: %d bytes in %lu cycles == " \
"%lu Kbytes/100Mcycle\n", \
name, bytes, _y - _x, \
100000000 / 1024 * bytes / (_y - _x + 1)); \
} \
else { \
call; \
}
@ -189,16 +189,16 @@ struct ArcProto {
int mtu; /* largest possible packet */
int is_ip; /* This is a ip plugin - not a raw thing */
void (*rx) (struct net_device * dev, int bufnum,
struct archdr * pkthdr, int length);
int (*build_header) (struct sk_buff * skb, struct net_device *dev,
unsigned short ethproto, uint8_t daddr);
void (*rx)(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length);
int (*build_header)(struct sk_buff *skb, struct net_device *dev,
unsigned short ethproto, uint8_t daddr);
/* these functions return '1' if the skb can now be freed */
int (*prepare_tx) (struct net_device * dev, struct archdr * pkt, int length,
int bufnum);
int (*continue_tx) (struct net_device * dev, int bufnum);
int (*ack_tx) (struct net_device * dev, int acked);
int (*prepare_tx)(struct net_device *dev, struct archdr *pkt, int length,
int bufnum);
int (*continue_tx)(struct net_device *dev, int bufnum);
int (*ack_tx)(struct net_device *dev, int acked);
};
extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
@ -263,13 +263,13 @@ struct arcnet_local {
* situations in which we (for example) want to pre-load a transmit
* buffer, or start receiving while we copy a received packet to
* memory.
*
*
* The rules: only the interrupt handler is allowed to _add_ buffers to
* the queue; thus, this doesn't require a lock. Both the interrupt
* handler and the transmit function will want to _remove_ buffers, so
* we need to handle the situation where they try to do it at the same
* time.
*
*
* If next_buf == first_free_buf, the queue is empty. Since there are
* only four possible buffers, the queue should never be full.
*/
@ -298,17 +298,17 @@ struct arcnet_local {
/* hardware-specific functions */
struct {
struct module *owner;
void (*command) (struct net_device * dev, int cmd);
int (*status) (struct net_device * dev);
void (*intmask) (struct net_device * dev, int mask);
int (*reset) (struct net_device * dev, int really_reset);
void (*open) (struct net_device * dev);
void (*close) (struct net_device * dev);
void (*command)(struct net_device *dev, int cmd);
int (*status)(struct net_device *dev);
void (*intmask)(struct net_device *dev, int mask);
int (*reset)(struct net_device *dev, int really_reset);
void (*open)(struct net_device *dev);
void (*close)(struct net_device *dev);
void (*copy_to_card) (struct net_device * dev, int bufnum, int offset,
void *buf, int count);
void (*copy_from_card) (struct net_device * dev, int bufnum, int offset,
void *buf, int count);
void (*copy_to_card)(struct net_device *dev, int bufnum, int offset,
void *buf, int count);
void (*copy_from_card)(struct net_device *dev, int bufnum, int offset,
void *buf, int count);
} hw;
void __iomem *mem_start; /* pointer to ioremap'ed MMIO */
@ -325,7 +325,7 @@ struct arcnet_local {
#if ARCNET_DEBUG_MAX & D_SKB
void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);
#else
#define arcnet_dump_skb(dev,skb,desc) ;
#define arcnet_dump_skb(dev, skb, desc) ;
#endif
void arcnet_unregister_proto(struct ArcProto *proto);
@ -335,7 +335,7 @@ struct net_device *alloc_arcdev(const char *name);
int arcnet_open(struct net_device *dev);
int arcnet_close(struct net_device *dev);
netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
struct net_device *dev);
struct net_device *dev);
void arcnet_timeout(struct net_device *dev);
#endif /* __KERNEL__ */