IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It contains 2 DT fixes:
- one for SAMA5D2 to fix the i2s1 assigned-clock-parents property
- one for kswitch-d10 (LAN966 based) enforcing proper settings
on GPIO pins
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYshFHwAKCRCejrg/N2X7
/QoJAP9BIE1tDoMkzB1c2+qsxzka8rksFfCnjGcF9vQYo4iSQAD+OkYXta2U+njj
UvpNgbOtLpPxswJsMpXCqhI71fpQ9gM=
=jbPC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6AX7
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 5.19 #2
It contains 2 DT fixes:
- one for SAMA5D2 to fix the i2s1 assigned-clock-parents property
- one for kswitch-d10 (LAN966 based) enforcing proper settings
on GPIO pins
* tag 'at91-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d2: Fix typo in i2s1 node
ARM: dts: kswitch-d10: use open drain mode for coma-mode pins
Link: https://lore.kernel.org/r/20220708151621.860339-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The device tree should include generic "jedec,spi-nor" compatible, and a
manufacturer-specific one.
The macronix part is what is shipped on the boards that come with a
flash chip.
Fixes: 45857ae95478 ("ARM: dts: orange-pi-zero: add node for SPI NOR")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708174529.3360-1-msuchanek@suse.de
Fix typo in i2s1 causing errors in dt binding validation.
Change assigned-parrents to assigned-clock-parents
to match i2s0 node formatting.
Fixes: 1ca81883c557 ("ARM: dts: at91: sama5d2: add nodes for I2S controllers")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
[claudiu.beznea: use imperative addressing in commit description, remove
blank line after fixes tag, fix typo in commit message]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220707215812.193008-1-Ryan.Wanner@microchip.com
A fix for the recently merged commit ed8faf6c8f8c ("optee: add
OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG").
Two small fixes in comment, repeated words etc.
-----BEGIN PGP SIGNATURE-----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=+wwB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=L85/
-----END PGP SIGNATURE-----
Merge tag 'tee-fixes-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Fixes for TEE subsystem
A fix for the recently merged commit ed8faf6c8f8c ("optee: add
OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG").
Two small fixes in comment, repeated words etc.
* tag 'tee-fixes-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: tee_get_drvdata(): fix description of return value
optee: Remove duplicate 'of' in two places.
optee: smc_abi.c: fix wrong pointer passed to IS_ERR/PTR_ERR()
Link: https://lore.kernel.org/r/20220708134607.GA901814@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch fixes the description of tee_get_drvdata()'s return value.
It actually returns the driver_data pointer supplied to
tee_device_alloc() since the TEE subsystem was added to the kernel.
Fixes: 967c9cca2cc5 ("tee: generic TEE subsystem")
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The driver use the coma-mode pins as open-drain. Flag them in the device
tree accordingly. This avoids the following error:
[ 14.114180] gpio-2007 (coma-mode): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Fixes: 46a9556d977e ("ARM: dts: kswitch-d10: enable networking")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220704150808.1104295-1-michael@walle.cc
A pin controlled by the iomuxc-snvs pin controller must be
specified under the dtb's iomuxc-snvs node.
Move the one and only pin of that category from the iomuxc node
and set the pinctrl-0 using it accordingly.
Fixes: 2aa9d6201949 ("ARM: dts: imx6ull-colibri: add touchscreen device nodes")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In optee_smc_do_call_with_arg() there is a code path when the argument
struct for RPC is passed appended to the primary argument struct. When
the address of the RPC struct is retrieved there's an invalid check for
success. It should be 'rpc_arg' pass to IS_ERR/PTR_ERR().
Fixes: ed8faf6c8f8c ("optee: add OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[jw: added background to the problem]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Fix the MAINTAINERS entry for the Synopsys AXS10x reset controller
driver, which still points to a nonexistent .txt file after the device
tree binding .yaml conversion.
Also, fix the devm_reset_control_bulk_get_optional_exclusive() call,
which was defective since its introduction due to a copy & paste error.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCYsaxZBcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwBznAP0ZIIfZrIixr9OOZAM2TSsTXVq5
vV54E+tfnu700fmBTAD9Hdiprk15QtzZISlI314nt3u8bbrLgVTBGbXlqLfDVQI=
=t6sW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cpdV
-----END PGP SIGNATURE-----
Merge tag 'reset-fixes-for-v5.19' of git://git.pengutronix.de/pza/linux into arm/fixes
Reset controller fixes for v5.19
Fix the MAINTAINERS entry for the Synopsys AXS10x reset controller
driver, which still points to a nonexistent .txt file after the device
tree binding .yaml conversion.
Also, fix the devm_reset_control_bulk_get_optional_exclusive() call,
which was defective since its introduction due to a copy & paste error.
* tag 'reset-fixes-for-v5.19' of git://git.pengutronix.de/pza/linux:
reset: Fix devm bulk optional exclusive control getter
MAINTAINERS: rectify entry for SYNOPSYS AXS10x RESET CONTROLLER DRIVER
Link: https://lore.kernel.org/r/20220707101344.3329314-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Hardware random, PCI and clock drivers for the PolarFire SoC have been
upstreamed but are not covered by the MAINTAINERS entry, so add them.
Daire is the author of the clock & PCI drivers, so add him as a
maintainer in place of Lewis.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220707142041.4096246-1-conor.dooley@microchip.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The email address sleep_walker@suse.com and the url http://hackndev.com/,
provided in the ARM/PALM TREO SUPPORT section, are not reachable anymore.
Make this machine support orphan, and give somebody the chance to step up.
Move the maintainer into CREDITS to keep the attribution to his work.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The clocks property is now mandatory. Add it to avoid warning message.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Fixes: eba5bea8f37f ("arm64: dts: ls1028a: add efuse node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When adding the bindings for the D1 display engine, I missed the
condition for the number of pipelines. D1 has two mixers, so it
will have two pipeline references.
Fixes: ae5a5d26c15c ("dt-bindings: display: Add D1 display engine compatibles")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702032921.22433-1-samuel@sholland.org
When compiling with -Wformat, clang emits the following warnings:
drivers/soc/qcom/smem.c:847:41: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
dev_err(smem->dev, "bad host %hu\n", remote_host);
~~~ ^~~~~~~~~~~
%u
./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
drivers/soc/qcom/smem.c:852:47: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
dev_err(smem->dev, "duplicate host %hu\n", remote_host);
~~~ ^~~~~~~~~~~
%u
./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct one and change type of
remote_host to "u16" to match with other types.
Signed-off-by: Bill Wendling <morbo@google.com>
Tested-by: Justin Stitt <jstitt007@gmail.com>
Reviewed-by: Justin Stitt <jstitt007@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The USBH composed of EHCI and OHCI controllers needs the PHY clock to be
initialized first, before enabling (gating) them. The reverse is also
required when going to suspend.
So, add USBPHY clock as 1st entry in both controllers, so the USBPHY PLL
gets enabled 1st upon controller init. Upon suspend/resume, this also makes
the clock to be disabled/re-enabled in the correct order.
This fixes some IRQ storm conditions seen when going to low-power, due to
PHY PLL being disabled before all clocks are cleanly gated.
Fixes: 949a0c0dec85 ("ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c")
Fixes: db7be2cb87ae ("ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Delete the node fixed clock managed by secure world with SCMI.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
LSE clock is provided by SCMI.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The peripheral clock of CEC is not LSE but CEC.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fixes stm32mp15*-scmi DTS files introduced in [1] to also access PWR
regulators through SCMI service. This is needed since enabling secure
only access to RCC clock and reset controllers also enables secure
access only on PWR voltage regulators reg11, reg18 and usb33 hence
these must also be accessed through SCMI Voltage Domain protocol.
This change applies on commit [2] that already corrects issues from
commit [1].
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: [1] https://lore.kernel.org/linux-arm-kernel/20220422150952.20587-7-alexandre.torgue@foss.st.com
Link: [2] https://lore.kernel.org/linux-arm-kernel/20220613071920.5463-1-alexandre.torgue@foss.st.com
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This removes duplicate includes in the sc7180-trogdor files, which
accidentally ended up disabling nodes intended to be enabled.
It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's
interconnects property is updated to match the #interconnect-cells,
avoiding sync_state issues and the GIC ITS is defined, to correct the
references from the PCIe nodes. On SDM845 the display subsystem's AHB
clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2
are correctly specified.
Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC.
-----BEGIN PGP SIGNATURE-----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=sObb
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+pwl
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DT fixes for v5.19
This removes duplicate includes in the sc7180-trogdor files, which
accidentally ended up disabling nodes intended to be enabled.
It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's
interconnects property is updated to match the #interconnect-cells,
avoiding sync_state issues and the GIC ITS is defined, to correct the
references from the PCIe nodes. On SDM845 the display subsystem's AHB
clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2
are correctly specified.
Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC.
* tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
MAINTAINERS: Add myself as a reviewer for Qualcomm ARM/64 support
arm64: dts: qcom: sdm845: use dispcc AHB clock for mdss node
arm64: dts: qcom: sm8450 add ITS device tree node
arm64: dts: qcom: msm8994: Fix CPU6/7 reg values
arm64: dts: qcom: sm8450: fix interconnects property of UFS node
arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar
Link: https://lore.kernel.org/r/20220703030208.408109-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few more fixes to address:
1. Issue reported on Juno with HDLCD clock which turned out to be yet
another firmware issue. The firmware is not conformant to the spec and
we now have to workaround as this may be copied to other platforms as
well. The spec expects to return size of 3 for a range clock rate
description while the firmware returns 1. We have other ways to validate
all the 3 entries the driver reads are polpulated and we use the same
to workaround this firmware bug.
2. Optee transport not setting the correct reponse length which is similar
to the one reported earlier on Rockchip platform.
3. Drop the usage of the deprecated ida_simple_{get,remove} and migrate to the
ida_{alloc,free}
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmK6/jsACgkQAEG6vDF+
4phDrBAAqGFJUmb34QqfKBhc9JtPIUUNvdHaxTDXotiokcGQXXZ7Ckx+F5sRTcYE
xgFijjc80Rl5YpwTCCoSK5Kp9zmAAGycaZjKpxoHyNoXmctewS71pzZix+JLzJgG
YZnQdHhdeXntH/7cKeJzE08BqzJDKeh2e3tMi3uCfZi+Uj5X4qMBj547in30E0BX
lDxviE85xnKQYEGP7nbTZGjMrLjqpjehfj6CQrN3TbtIoAcad7lCEXY5l0cE9PF+
N4x7kEGnlzUbi1dtLiyVBYU9OkA0wo3m4KAnughipvzfUm5RXKRTacaVsOGB2Mm4
fesGnlC812XPSEcMnqqaY/ruPnVbPE8RtXx2FV1xoVlAQuyQqc97cDr/s7INX8aG
FaPUHXBH63rga0zD6I8xVJ7zbzYZdZfhFY3WSO9ntONZtcL9F5YSrokthmlV0mWq
+mmqb1fbvkb6Ym+rCtVCrgmsqJTgMDNYspDPl79EuycmH/eh1KzSPRrlQckrSbgK
2KkryADrmbD0d3nQLb/AgWyfSbXFF+fbEh3oZm1xhSCL+bE+8qjVsIOVTfnz6jo/
OdensXXdF43OsDQPPNSHijPe0LYexpSR3hVHphywZ/+aNOJ6h9e98O6DH93mdMqQ
gmSbw16afKZpmfwyn95k1O6sBXj+b428CIodPoWPHkTC4S0v6T4=
=xRfp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=sgSb
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI firmware driver fixes for v5.19
Few more fixes to address:
1. Issue reported on Juno with HDLCD clock which turned out to be yet
another firmware issue. The firmware is not conformant to the spec and
we now have to workaround as this may be copied to other platforms as
well. The spec expects to return size of 3 for a range clock rate
description while the firmware returns 1. We have other ways to validate
all the 3 entries the driver reads are polpulated and we use the same
to workaround this firmware bug.
2. Optee transport not setting the correct reponse length which is similar
to the one reported earlier on Rockchip platform.
3. Drop the usage of the deprecated ida_simple_{get,remove} and migrate to the
ida_{alloc,free}
* tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
firmware: arm_scmi: Fix response size warning for OPTEE transport
firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks
Link: https://lore.kernel.org/r/20220628133315.699803-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix the SDIO description for imx7d-smegw01 board to ensure there is
no communication made at 1.8V.
- Fix pgc_ispdwp power-domain clock, which should be
IMX8MP_CLK_MEDIA_ISP_ROOT.
- Re-enable framebuffer support in mxs_defconfig to fix a Kconfig
regression.
- A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP
based boards to leave reserved bits untouched.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmK7tGoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6gQQgAsaOPV6XCcWJCf+BAJkZvk8ba4Q4C
F/fZHnqbXFUeQqjMckVv1b9UlGLw2uNeWoW0FfQ/p8WV+uDLIlpp19wpvJHKkTM1
U1zIBK0RdJiUrngfCrOedZwHmzg11D3aVn0gotEPbW+S+aXXcW5GXH0Tt2Z/v5mF
hKIxqW1KE+OUpCAoNIehgImFjKjS8fFX4vxMQ81bkdp9iLTNc6kvsHivyXk1wS2F
E5CmaWPlPGHjaKXWvUnh8rO2QstRNTZpYe1FbCheRGBcfT2U6VFPAMYc9EJNM64d
UKSHOsT4l+7D7Jk8CMMYftBII21fwX+Qs3PepE/rnND3WYygH09iFOHNDA==
=6inj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ZOsU
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.19, round 2:
- Fix the SDIO description for imx7d-smegw01 board to ensure there is
no communication made at 1.8V.
- Fix pgc_ispdwp power-domain clock, which should be
IMX8MP_CLK_MEDIA_ISP_ROOT.
- Re-enable framebuffer support in mxs_defconfig to fix a Kconfig
regression.
- A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP
based boards to leave reserved bits untouched.
* tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings
arm64: dts: imx8mp-venice-gw74xx: correct pad settings
arm64: dts: imx8mp-evk: correct I2C3 pad settings
arm64: dts: imx8mp-evk: correct I2C1 pad settings
arm64: dts: imx8mp-evk: correct I2C5 pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct eqos pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct gpio-led pad settings
arm64: dts: imx8mp-evk: correct the uart2 pinctl value
arm64: dts: imx8mp-evk: correct mmc pad settings
ARM: mxs_defconfig: Enable the framebuffer
arm64: dts: imx8mp: correct clock of pgc_ispdwp
ARM: dts: imx7d-smegw01: Fix the SDIO description
Link: https://lore.kernel.org/r/20220629021244.GL819983@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The kernel test robot found this inconsistency:
drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning:
'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=]
737 | static const struct of_device_id ixp4xx_npe_of_match[] = {
This is because the match is enclosed in the of_match_ptr()
which compiles into NULL when OF is disabled and this
is unnecessary.
Fix it by dropping of_match_ptr() around the match.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220626074315.61209-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most likely due to copy-paste mistake the device managed version of the
denoted reset control getter has been implemented with invalid semantic,
which can be immediately spotted by having "WARN_ON(shared && acquired)"
warning in the system log as soon as the method is called. Anyway let's
fix it by altering the boolean arguments passed to the
__devm_reset_control_bulk_get() method from
- shared = true, optional = false, acquired = true
to
+ shared = false, optional = true, acquired = true
That's what they were supposed to be in the first place (see the non-devm
version of the same method: reset_control_bulk_get_optional_exclusive()).
Fixes: 48d71395896d ("reset: Add reset_control_bulk API")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220624141853.7417-2-Sergey.Semin@baikalelectronics.ru
Commit 820f722c05dd ("dt-bindings: reset: snps,axs10x-reset: Convert to
yaml") converts snps,axs10x-reset.txt to yaml, but misses to adjust its
reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file reference in SYNOPSYS AXS10x RESET CONTROLLER DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220601082239.12009-1-lukas.bulwahn@gmail.com
at91_pm_secure_init() is used inside sama5d2_pm_init(), which has
the __init notation.
Pass the __init notation to at91_pm_secure_init() as well to fix the
following section mismatch warning:
WARNING: modpost: vmlinux.o(.text.unlikely+0x2138): Section mismatch in reference from the function at91_pm_secure_init() to the (unknown reference) .init.rodata:(unknown)
Fixes: f2f5cf78a333 ("ARM: at91: pm: add support for sama5d2 secure suspend")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220622114810.1186330-1-festevam@gmail.com
Fix SoC detection for SAM9X60 SiPs:
SAM9X60D5M
SAM9X60D1G
SAM9X60D6K
Fixes: af3a10513cd6 ("drivers: soc: atmel: add per soc id and version match masks")
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220616081344.1978664-1-claudiu.beznea@microchip.com
The eeprom memories on the board are microchip 24aa025e48, which are 2 Kbits
and are compatible with at24c02 not at24c32.
Fixes: 68a95ef72cefe ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220607090455.80433-2-eugen.hristev@microchip.com
The board has a microchip 24aa025e48 eeprom, which is a 2 Kbits memory,
so it's compatible with at24c02 not at24c32.
Also the size property is wrong, it's not 128 bytes, but 256 bytes.
Thus removing and leaving it to the default (256).
Fixes: 1e5f532c27371 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220607090455.80433-1-eugen.hristev@microchip.com
Use proper compatible strings for SAMA7G5's RTC and RTT IPs. These are
necessary for configuring wakeup sources for ULP1 PM mode.
Fixes: 6501330f9f5e ("ARM: at91: pm: add pm support for SAMA7G5")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220523092421.317345-4-claudiu.beznea@microchip.com
Use proper compatible strings for SAM9X60's RTC and RTT IPs. These are
necessary for configuring wakeup sources for ULP1 PM mode.
Fixes: eaedc0d379da ("ARM: at91: pm: add ULP1 support for SAM9X60")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220523092421.317345-3-claudiu.beznea@microchip.com
"make dtbs_check" complains about the missing "-supply" suffix for
vdd_lvs1_2 which is clearly a typo, originally introduced in the
msm8994-smd-rpm.dtsi file and apparently later copied to
msm8992-xiaomi-libra.dts:
msm8992-lg-bullhead-rev-10/101.dtb: pm8994-regulators: 'vdd_lvs1_2'
does not match any of the regexes:
'.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+'
From schema: regulator/qcom,smd-rpm-regulator.yaml
msm8992-xiaomi-libra.dtb: pm8994-regulators: 'vdd_lvs1_2'
does not match any of the regexes:
'.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+'
From schema: regulator/qcom,smd-rpm-regulator.yaml
Reported-by: Rob Herring <robh@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: f3b2c99e73be ("arm64: dts: Enable onboard SDHCI on msm8992")
Fixes: 0f5cdb31e850 ("arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220627135938.2901871-1-stephan.gerhold@kernkonzept.com
Replace the deprecated ida_simple_{get,remove} with ida_{alloc,free}.
Link: https://lore.kernel.org/r/20220616055052.4559-1-liubo03@inspur.com
Signed-off-by: Bo Liu <liubo03@inspur.com>
[sudeep.holla: Replace ida_alloc_min with ida_alloc as suggested by Cristian]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Some protocols check the response size with the expected value but optee
shared memory doesn't return such size whereas it is available in the
optee output buffer.
As an example, the base protocol compares the response size with the
expected result when requesting the list of protocol which triggers a
warning with optee shared memory:
arm-scmi firmware:scmi0: Malformed reply - real_sz:116 calc_sz:4 (loop_num_ret:4)
Save the output buffer length and use it when fetching the answer.
Link: https://lore.kernel.org/r/20220624074549.3298-1-vincent.guittot@linaro.org
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
BIT3 and BIT0 are reserved bits, should not touch.
Fixes: 88f7f6bcca37 ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
BIT3 and BIT0 are reserved bits, should not touch.
Fixes: 6f96852619d5 ("arm64: dts: freescale: Add support EQOS MAC on phyBOARD-Pollux-i.MX8MP")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to RM bit layout, BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Should not set reserved bit.
Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
