IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently, the driver emulates 802.1Q FIDs using 802.1D FIDs. As such,
the RIFs configured on top of these FIDs are FID RIFs and not VLAN RIFs.
As part of converting the driver to the unified bridge model, 802.1Q
FIDs and VLAN RIFs will be used.
As a preparation for this change, rename the emulated VLAN RIFs from
'MLXSW_SP_RIF_TYPE_VLAN' to 'MLXSW_SP_RIF_TYPE_VLAN_EMU'. After the
conversion the emulated VLAN RIFs will be removed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Egress VID for layer 2 multicast is determined from two tables, the MPE
and PGT tables. The MPE table is a two dimensional table indexed by local
port and SMPE index, which should be thought of as a FID index.
In Spectrum-1 the SMPE index is derived from the PGT entry, whereas in
Spectrum-2 and newer ASICs the SMPE index is a FID attribute configured
via the SFMR register.
The validity of the SMPE index in SFMR is influenced from two factors:
1. FID family. SMPE index is reserved for rFIDs, as their flooding is
handled by firmware.
2. ASIC generation. SMPE index is always reserved for Spectrum-1.
As such, the validity of the SMPE index should be an attribute of the FID
family and have different arrays of FID families per-ASIC type.
As a preparation for SMPE index configuration, create separate arrays of
FID families for different ASICs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function configures {Port, VID}->FID classification entries using
the SVFA register. In the unified bridge model such entries will need to
be programmed with an ingress RIF parameter, which is a FID attribute.
As a preparation for this change, pass the FID structure itself to the
function.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function gets several arguments derived from the FID structure
itself. In the future, it will need to be extended to configure
additional FID attributes.
Prepare for that change and reduce the arguments list by passing the FID
structure itself.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch, all the callers of the function pass arguments
extracted from the FID structure itself. Reduce the arguments list by
simply passing the FID structure itself.
This makes the function more generic as it can be easily extended to
edit any FID attributes. Rename it to mlxsw_sp_fid_edit_op() to reflect
that.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the only FID attributes that are edited after FID creation
are its VNI and NVE tunnel flood pointer. This is achieved by eventually
invoking mlxsw_sp_fid_vni_op() with an updated set of arguments.
In the future, more FID attributes will need to be edited, such as the
ingress RIF configured on top of the FID.
Therefore, it makes sense to encapsulate all the FID edit logic in one
function that will perform the edit based on an updated FID structure.
To that end, update the FID structure before invoking the various edit
operations that eventually call into mlxsw_sp_fid_vni_op(). Use the
updated structure as the sole argument of the edit operations.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the unified bridge model, FID classification mappings (e.g., {Port,
VID}->FID) and layer 3 egress VID classification mappings (i.e., {eRIF,
ePort}->VID) will need to be updated when a RIF is configured on top of
a FID. This requires the driver to be aware of all the {Port, VID} pairs
mapped to a FID.
To that end, extend the FID structure with a linked list of {Port, VID}
pairs. Add an entry to the list when a {Port, VID} is mapped to a FID
and remove it upon unmap.
Keep the list sorted by local port as it will be useful for {eRIF,
ePort}->VID mappings via REIV register in the future.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
ipmr: get rid of rwlocks
We need to get rid of rwlocks in networking stacks,
if read_lock() is (ab)used from softirq context.
As discussed recently [1], rwlock are unfair by design in this case,
and writers can starve and trigger soft lockups.
This series convert ipmr code (both IPv4 and IPv6 families)
to RCU and spinlocks.
[1] https://lkml.org/lkml/2022/6/17/272
v2: fixed two typos, and resent because patch 19/19
did not make it to patchwork.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
mrt_lock is only held in write mode, from process context only.
We can switch to a mere spinlock, and avoid blocking BH.
Also, vif_dev_read() is always called under standard rcu_read_lock().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mrt_lock is only held in write mode, from process context only.
We can switch to a mere spinlock, and avoid blocking BH.
Also, vif_dev_read() is always called under standard rcu_read_lock().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can use standard rcu_read_lock(), to get rid
of last read_lock(&mrt_lock) call points.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We no longer need to acquire mrt_lock() in mr_dump,
using rcu_read_lock() is enough.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like ipmr_get_route(), we can use standard RCU here.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6_mr_forward() uses standard RCU protection already.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rcu_read_lock() protection is good enough.
ip6mr_cache_unresolved() uses a dedicated spinlock (mfc_unres_lock)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rcu_read_lock() protection is more than enough.
vif_dev_read() supports either mrt_lock or rcu_read_lock().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6mr_cache_report() first argument can be marked const, and we change
the caller convention about which lock needs to be held.
Instead of read_lock(&mrt_lock), we can use rcu_read_lock().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mr_fill_mroute() uses standard rcu_read_unlock(),
no need to grab mrt_lock anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip_mr_forward() uses standard RCU protection already.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rcu_read_lock() protection is good enough.
ipmr_cache_unresolved() uses a dedicated spinlock (mfc_unres_lock)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rcu_read_lock() protection is more than enough.
vif_dev_read() supports either mrt_lock or rcu_read_lock().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipmr_cache_report() first argument can be marked const, and we change
the caller convention about which lock needs to be held.
Instead of read_lock(&mrt_lock), we can use rcu_read_lock().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
igmpmsg_netlink_event() first argument can be marked const.
igmpmsg_netlink_event() reads mrt->net and mrt->id,
both being set once in mr_table_alloc().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will soon use RCU instead of rwlock in ipmr & ip6mr
This preliminary patch adds proper rcu verbs to read/write
(struct vif_device)->dev
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pim6_rcv() is called under rcu_read_lock(), there is
no need to use dev_hold()/dev_put() pair.
IPv4 side was handled in commit 55747a0a73ea
("ipmr: __pim_rcv() is called under rcu_read_lock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Ramadoss says:
====================
net: dsa: microchip: common spi probe for the ksz series switches - part 2
This patch series aims to refactor the ksz_switch_register routine to have the
common flow for the ksz series switch. And this is the follow up patch series.
First, it tries moves the common implementation in the setup from individual
files to ksz_setup. Then implements the common dsa_switch_ops structure instead
of independent registration. And then moves the ksz_dev_ops to ksz_common.c,
it allows the dynamic detection of which ksz_dev_ops to be used based on
the switch detection function.
Finally, the patch updates the ksz_spi probe function to be same for all the
ksz_switches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As of now, there are two spi probes, one ksz8795_spi.c and other
ksz9477_spi.c. This patch combines two files into single ksz_spi.c. The
difference between the two are regmap config and struct ksz8. The regmap
config is assigned based on the platform data. And struct ksz8 is left
untouched, as it is used only ksz8795.c. It can be used for all
other switches also in future.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch delete the ksz8_switch_register and ksz9477_switch_register
since both are calling the ksz_switch_register function. Instead the
ksz_switch_register is called from the probe function.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch move the ksz_dev_ops from individual files to ksz_common.c.
And the dev_ops is assigned to ksz_device based on the switch detect.
This reduces the redundant function and allows to reuse the
functionality for LAN937x which has similar register set.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch replaces the two different menuconfig for ksz9477 and ksz8795
to single ksz_common. so that it can be extended for the other switch
like lan937x. And removes the export_symbols for the extern functions in
the ksz_common.h.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As per 'commit 3506b2f42dff ("net: dsa: microchip: call
phy_remove_link_mode during probe")' phy_remove_link_mode is added in
the switch_register function after dsa_switch_register. In order to have
the common switch register function, moving this phylink validation to
phylink_get_caps validation hook.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At present, ksz8795.c and ksz9477.c have separate dsa_switch_ops
structure initialization. This patch modifies the files such a way that
ksz switches has common dsa_switch_ops in the ksz_common.c file.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch move the setting the start bit from the individual switch
configuration to ksz_setup
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves the enabling the multicast storm protection from
individual setup function to ksz_setup function.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch move the 10% broadcast protection from the individual setup
to ksz_setup. In the ksz9477, broadcast protection is updated in reset
function.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch move the common initialization of switches to ksz_setup and
perform the switch specific initialization using the ksz_dev_ops
function pointer.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to transmit the STP BPDU packet to the CPU port, the STP
address 01-80-c2-00-00-00 has to be added to static alu table for
ksz8795 series switch. For the ksz9477 switch, there is reserved
multicast table which handles forwarding the particular set of
multicast address to cpu port. So enabling the multicast reserved table
and updated the cpu port index. The stp addr is enabled during the setup
phase using the enable_stp_addr pointer in struct ksz_dev_ops.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To have the common set of initialization in ksz_setup, introduced the
new config_cpu_port member to ksz_dev_ops. Since both the ksz8795.c and
ksz9477.c configuring the cpu port in the setup function, introduced the
member.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch renames the shutdown to reset in ksz_dev_ops in order to use
the reset dev_ops in the ksz_setup.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu says:
====================
Bonding: add per-port priority support
This patch set add per-port priority for bonding failover re-selection.
The first patch add a new filed for bond_opt_value so we can set slave
value easier. I will update the bond_option_queue_id_set() setting
in later patch.
The second patch add the per-port priority for bonding. I defined
it as s32 to compatible with team prio option, which also use a s32
value.
v3: store slave_dev in bond_opt_value directly to simplify setting
values for slave.
v2: using the extant bonding options management stuff instead setting
slave prio in bond_slave_changelink() directly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add per port priority support for bonding active slave re-selection during
failover. A higher number means higher priority in selection. The primary
slave still has the highest priority. This option also follows the
primary_reselect rules.
This option could only be configured via netlink.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, bond_opt_value are mostly used for bonding option settings. If
we want to set a value for slave, we need to re-alloc a string to store
both slave name and vlaue, like bond_option_queue_id_set() does, which
is complex and dumb.
As Jon suggested, let's add a union field slave_dev for bond_opt_value,
which will be benefit for future slave option setting. In function
__bond_opt_init(), we will always check the extra field and set it
if it's not NULL.
Suggested-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The GPY115 and GPY2xx PHYs contain an integrated temperature sensor. It
accuracy is +/- 5°C. Add support for it.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220622141716.3517645-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of open-coding the bad characters replacement in the hwmon name,
use the new devm_hwmon_sanitize_name().
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of open-coding the bad characters replacement in the hwmon name,
use the new hwmon_sanitize_name().
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
