IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Document new playback-only and capture-only flags which can be used
when dai link can only support just one direction: playback or capture
but not both.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://msgid.link/r/20231128081119.106360-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need this to support MICFIL PDM found on i.MX8MP where the DAI link
supports only capture direction.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://msgid.link/r/20231128081119.106360-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If probe is defered no error should be printed. Use dev_err_probe() to
have it muted.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/b941a404d97c01ef3e30c49925927b9a7dafeb19.1702422544.git.daniel@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: bbbc18d8c27c ("ASoC: cs42l43: Allow HP amp to cool off after current limit")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20231212104149.2388753-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Whilst occasional current limiting is fine, constant current limiting
should be avoided. Add a back off system that will disable the
headphone amp, if a lot of current limiting is seen in a short window
of time.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20231211160019.2034442-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This fix is based on commit [1] fixing click and pop sounds during
SoundWire port start because PA is left unmuted.
making use of new mute_unmute_on_trigger flag and removing unmute
at PA setup, removes the Click/Pop issue at SoundWire enable.
[1] 805ce81826c8 ("ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231211-topic-sm8x50-upstream-wsa884x-fix-plop-v1-1-0dc630a19172@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) WSA
macro codec, which looks like compatible with earlier SM8550.
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20231129113014.38837-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) VA
macro codec, which looks like compatible with earlier SM8550.
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231129113014.38837-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) TX
macro codec, which looks like compatible with earlier SM8550.
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20231129113014.38837-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) RX
macro codec, which looks like compatible with earlier SM8550.
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20231129113014.38837-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support four channel streams. Map channel 3 and 4 to left/right
surround ("quad(side)" from ffmpeg standard channel list) to match what
is in qdsp6/q6dsp-common.c driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231130180758.212172-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Move code assigning channel mapping values to a common helper function.
This simplifies three out of four cases, with the last case using
incompatible type (uint16_t array instead of uint8_t array).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231130180758.212172-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Linus Walleij <linus.walleij@linaro.org>:
This converts the remaining Wolfson ASoC codecs to
use GPIO descriptors.
These Wolfson codecs are mostly used with different
Samsung S3C (especially Cragganmore 6410) board files,
so the in-tree users are fixed up in the process.
This converts the WM8996 codec to use GPIO descriptors, an a similar
way to WM5100.
The driver is instantiating a GPIO chip named wm8996, and we get
rid of the base address for the GPIO chip from the platform data and
just use dynamic numbering. Move base and ngpio into the static
gpio_chip template.
Fix up the only in-tree user which is the Cragganmore 6410 module.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-5-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the WM5100 codec to use GPIO descriptors, a pretty
straight-forward conversion with the following peculiarities:
- The driver is instantiating a GPIO chip named wm5100, and the
headphone polarity detection GPIO is lifted from there. We add
this to the GPIO descriptor table as well, and we can then get
rid of also the base address for the GPIO chip from the
platform data and just use dynamic numbering.
- Fix up the only in-tree user which is the Cragganmore 6410
module.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-4-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the WM2200 codec to use GPIO descriptors.
This is a pretty straight-forward conversion, and it also
switches over the single in-tree user in the S3C
Cragganmore module for S3C 6410.
This coded does not seem to get selected or be selectable
through Kconfig, I had to hack another soundcard Kconfig
entry to select it for compile tests.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-3-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the WM1250-EV1 codec to use GPIO descriptors.
It turns out that the platform data was only used to pass some
global GPIO numbers from a board file, so we get rid of this
and also switch over the single in-tree user in the S3C
Cragganmore module for S3C 6410.
The driver obtains two GPIO lines named OSR and master and just
pull them low, we leave this behaviour as it was.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-2-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the WM0010 codec to use GPIO descriptors.
It's a pretty straight-forward conversion also switching over
the single in-tree user in the S3C Cragganmore module
for S3C 6410.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-1-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The > comparison should be >= to avoid writing one element beyond the end
of the dai_link->ch_maps[] array. The dai_link->ch_maps[] array is
allocated in graph_parse_node_multi() and it has "nm_max" elements.
Fixes: e2de6808df4a ("ASoC: audio-graph-card2: add CPU:Codec = N:M support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1032216f-902f-48f9-aa49-9d5ece8e87f2@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify acp config flag read logic from ACP v7.0 onwards.
Instead of reading from DMI table match entry, read the
config flag value from BIOS ACPI table.
This will remove updating DMI table when new platform support
is added.
Use FLAG_AMD_LEGACY_ONLY_DMIC flag as default one.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20231207045505.1519151-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code flow is:
1. snd_hdac_device_register()
2. set parameters needed by the hdac driver
3. request_codec_module()
the hdac driver is probed at this point
During boot the codec drivers are not loaded when the hdac device is
registered, it is going to be probed later when loading the codec module,
which point the parameters are set.
On module remove/insert
rmmod snd_sof_pci_intel_tgl
modprobe snd_sof_pci_intel_tgl
The codec module remains loaded and the driver will be probed when the
hdac device is created right away, before the parameters for the driver
has been configured:
1. snd_hdac_device_register()
the hdac driver is probed at this point
2. set parameters needed by the hdac driver
3. request_codec_module()
will be a NOP as the module is already loaded
Move the snd_hdac_device_register() later, to be done right before
requesting the codec module to make sure that the parameters are all set
before the device is created:
1. set parameters needed by the hdac driver
2. snd_hdac_device_register()
3. request_codec_module()
This way at the hdac driver probe all parameters will be set in all cases.
Link: https://github.com/thesofproject/linux/issues/4731
Fixes: a0575b4add21 ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some platforms doesn't have reference mclk pin to codec,
so set bclk as a clk source for rt5682s codec pll in tdm mode.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20231206110620.1695591-7-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some platforms doesn't have reference mclk pin to codec,
so set bclk as a clk source for rt5682s codec pll in tdm mode.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20231206110620.1695591-7-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Unlike i.MX8MP, i.MX93 has two XCVR interrupts.
Describe the two interrupts for the i.MX93 to fix the following
dt-schema warning:
imx93-11x11-evk.dtb: xcvr@42680000: interrupts: [[0, 203, 4], [0, 204, 4]] is too long
from schema $id: http://devicetree.org/schemas/sound/fsl,xcvr.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231206113047.2240055-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Header alignment with firmware, addition of new token and partial
match filters.
Hookup the CS35L56 DAPM_OUTPUT widgets to a DAPM_SPK widget so
that there is a complete logical path to a speaker.
There is no particular reason to use multiple speaker widgets.
The CS35L56 are designed to work together as a set so they have
all been connected to a single speaker widget.
Instead of a hardcoded list of codec widget names, the code walks
through all the codecs on the dailink and for every cs35l56 it uses
its name prefix to construct the source end of the route. This adds
a small amount of overhead during probe but has the benefit that it
isn't dependent on every system using the same prefixes.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231205135001.2506070-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in a dev_err_probe error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231205101740.2820813-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT722 SDCA codec supports 3 data lanes,
lane_control_support property has to be
set to use additional two lanes.
Reviewed-by: Jack Yu <jack580304@gmail.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204213721.197785-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Buffer flags have been in firmware for ages but were never fully
implemented in the topology/kernel system. This commit finishes off the
implementation.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214713.208951-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof header file requires these struct with 4 byte aligned, so
add same alignment in sof driver definition.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214713.208951-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We use partial match for connecting DAI link and DAI widget. We need to
use partial match for disconnecting, too.
Fixes: fe88788779fc ("ASoC: SOF: topology: Use partial match for connecting DAI link and DAI widget")
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214713.208951-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'if (!playback)' will not work if the dai is only on capture dai link
or is on more than one playback dai links. Check 'if
(ctx->headset_codec_dev)' instead.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_sdw_rt_sdca_jack_exit() are used by different codecs, and some of
them use the same dai name.
For example, rt712 and rt713 both use "rt712-sdca-aif1" and
sof_sdw_rt_sdca_jack_exit().
As a result, sof_sdw_rt_sdca_jack_exit() will be called twice by
mc_dailink_exit_loop(). Set ctx->headset_codec_dev = NULL; after
put_device(ctx->headset_codec_dev); to avoid ctx->headset_codec_dev
being put twice.
Fixes: 5360c6704638 ("ASoC: Intel: sof_sdw: add rt712 support")
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The drv_name in enumeration table for ALC5682I-VS codec does not match
the board id string in machine driver. Modify the entry of "10EC5682"
to enumerate "RTL5682" as well and remove invalid entry.
Fixes: 88b4d77d6035 ("ASoC: Intel: glk_rt5682_max98357a: support ALC5682I-VS codec")
Reported-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "rpl_nau8825_def" board to reduce
the number of rpl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "adl_nau8825_def" board to reduce
the number of adl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a test configuration for UpExtreme with Cirrus Logic
CS35L56-EIGHT-C board.
The codec layout is configured as:
- Link3: CS42L43 Jack
- Link0: 2x CS35L56 Speaker (amps 1 and 2)
- Link1: 2x CS35L56 Speaker (amps 7 and 8)
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231204135614.2169624-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Hans de Goede <hdegoede@redhat.com>:
This takes some of the work done to auto-configure quirks/routing
for ESS83xx codecs by getting the info from ACPI from:
https://github.com/thesofproject/linux/pull/4112
And then builds on top of this to add auto-configuration to
the bytcht_es8316 board driver.
Note compared to the pull-request, which deals with the ES8336, this
series deals with the ES8316 (for which I have several devices to test
on) and this moves handling of the _DSM from the codec driver to
the board driver since with the ES8316 the board driver takes
care of setting up various routes for things like the mic and
speakers.
After this series audio now works properly on a CHT Chuwi Hi12
tablet without needing to add an extra quirk for that model.
This has also been tested on the following devices, where things
are unchanged from before (the ACPI autoconfiguration gives the
same results as the old defaults) :
Onda V80 plus (CHT)
GP-electronic T701 (BYT)
I also tested this on a Nanote UMPC-01, here the _DSM result
for PLATFORM_SPK_TYPE_ARG wrongly returns 1 (mono) while
the device actually has 2 speakers, so this model needs to keep
its DMI quirk.
I don't have an IRBIS NB41 nor a TECLAST X98 Plus II,
so the DMI quirks for those are left in place too on
a better safe then sorry basis.
