IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When a bad bpf prog '.init' calls
bpf_setsockopt(TCP_CONGESTION, "itself"), it will trigger this loop:
.init => bpf_setsockopt(tcp_cc) => .init => bpf_setsockopt(tcp_cc) ...
... => .init => bpf_setsockopt(tcp_cc).
It was prevented by the prog->active counter before but the prog->active
detection cannot be used in struct_ops as explained in the earlier
patch of the set.
In this patch, the second bpf_setsockopt(tcp_cc) is not allowed
in order to break the loop. This is done by using a bit of
an existing 1 byte hole in tcp_sock to check if there is
on-going bpf_setsockopt(TCP_CONGESTION) in this tcp_sock.
Note that this essentially limits only the first '.init' can
call bpf_setsockopt(TCP_CONGESTION) to pick a fallback cc (eg. peer
does not support ECN) and the second '.init' cannot fallback to
another cc. This applies even the second
bpf_setsockopt(TCP_CONGESTION) will not cause a loop.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220929070407.965581-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch moves the bpf_setsockopt(TCP_CONGESTION) logic into
another function. The next patch will add extra logic to avoid
recursion and this will make the latter patch easier to follow.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220929070407.965581-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The check on the tcp-cc, "cdg", is done in the bpf_sk_setsockopt which is
used by the bpf_tcp_ca, bpf_lsm, cg_sockopt, and tcp_iter hooks.
However, it is not done for cg sock_ddr, cg sockops, and some of
the bpf_lsm_cgroup hooks.
The tcp-cc "cdg" should have very limited usage. This patch is to
move the "cdg" check to the common sol_tcp_sockopt() so that all
hooks have a consistent behavior. The motivation to make
this check consistent now is because the latter patch will
refactor the bpf_setsockopt(TCP_CONGESTION) into another function,
so it is better to take this chance to refactor this piece
also.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220929070407.965581-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The struct_ops prog is to allow using bpf to implement the functions in
a struct (eg. kernel module). The current usage is to implement the
tcp_congestion. The kernel does not call the tcp-cc's ops (ie.
the bpf prog) in a recursive way.
The struct_ops is sharing the tracing-trampoline's enter/exit
function which tracks prog->active to avoid recursion. It is
needed for tracing prog. However, it turns out the struct_ops
bpf prog will hit this prog->active and unnecessarily skipped
running the struct_ops prog. eg. The '.ssthresh' may run in_task()
and then interrupted by softirq that runs the same '.ssthresh'.
Skip running the '.ssthresh' will end up returning random value
to the caller.
The patch adds __bpf_prog_{enter,exit}_struct_ops for the
struct_ops trampoline. They do not track the prog->active
to detect recursion.
One exception is when the tcp_congestion's '.init' ops is doing
bpf_setsockopt(TCP_CONGESTION) and then recurs to the same
'.init' ops. This will be addressed in the following patches.
Fixes: ca06f55b9002 ("bpf: Add per-program recursion prevention mechanism")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220929070407.965581-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Wang Yufen says:
====================
Convert some tests to use the preferred ASSERT_* macros instead of the
deprecated CHECK().
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Kui-Feng Lee says:
====================
Allow creating an iterator that loops through resources of one task/thread.
People could only create iterators to loop through all resources of
files, vma, and tasks in the system, even though they were interested in only the
resources of a specific task or process. Passing the additional
parameters, people can now create an iterator to go through all
resources or only the resources of a task.
Major Changes:
- Add new parameters in bpf_iter_link_info to indicate to go through
all tasks or to go through a specific task.
- Change the implementations of BPF iterators of vma, files, and
tasks to allow going through only the resources of a specific task.
- Provide the arguments of parameterized task iterators in
bpf_link_info.
Differences from v10:
- Check pid_alive() to avoid potential errors.
Differences from v9:
- Fix the boundary check of computing page_shift.
- Rewording the reason of checking and returning the same task.
Differences from v8:
- Fix uninitialized variable.
- Avoid redundant work of getting task from pid.
- Change format string to use %u instead of %d.
- Use the value of page_shift to compute correct offset in
bpf_iter_vm_offset.c.
Differences from v7:
- Travel the tasks of a process through task_group linked list
instead of traveling through the whole namespace.
Differences from v6:
- Add part 5 to make bpftool show the value of parameters.
- Change of wording of show_fdinfo() to show pid or tid instead of
always pid.
- Simplify error handling and naming of test cases.
Differences from v5:
- Use user-space tid/pid terminologies in bpf_iter_link_info and
bpf_link_info.
- Fix reference count
- Merge all variants to one 'u32 pid' in internal structs.
(bpf_iter_aux_info and bpf_iter_seq_task_common)
- Compare the result of get_uprobe_offset() with the implementation
with the vma iterators.
- Implement show_fdinfo.
Differences from v4:
- Remove 'type' from bpf_iter_link_info and bpf_link_info.
v10: https://lore.kernel.org/all/20220831181039.2680134-1-kuifeng@fb.com/
v9: https://lore.kernel.org/bpf/20220829192317.486946-1-kuifeng@fb.com/
v8: https://lore.kernel.org/bpf/20220829192317.486946-1-kuifeng@fb.com/
v7: https://lore.kernel.org/bpf/20220826003712.2810158-1-kuifeng@fb.com/
v6: https://lore.kernel.org/bpf/20220819220927.3409575-1-kuifeng@fb.com/
v5: https://lore.kernel.org/bpf/20220811001654.1316689-1-kuifeng@fb.com/
v4: https://lore.kernel.org/bpf/20220809195429.1043220-1-kuifeng@fb.com/
v3: https://lore.kernel.org/bpf/20220809063501.667610-1-kuifeng@fb.com/
v2: https://lore.kernel.org/bpf/20220801232649.2306614-1-kuifeng@fb.com/
v1: https://lore.kernel.org/bpf/20220726051713.840431-1-kuifeng@fb.com/
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Show tid or pid of iterators if giving an argument of tid or pid
For example, the command `bpftool link list` may list following
lines.
1: iter prog 2 target_name bpf_map
2: iter prog 3 target_name bpf_prog
33: iter prog 225 target_name task_file tid 1644
pids test_progs(1644)
Link 33 is a task_file iterator with tid 1644. For now, only targets
of task, task_file and task_vma may be with tid or pid to filter out
tasks other than those belonging to a process (pid) or a thread (tid).
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20220926184957.208194-6-kuifeng@fb.com
Test iterators of vma, files and tasks.
Ensure the API works appropriately to visit all tasks,
tasks in a process, or a particular task.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20220926184957.208194-5-kuifeng@fb.com
Show information of iterators in the respective files under
/proc/<pid>/fdinfo/.
For example, for a task file iterator with 1723 as the value of tid
parameter, its fdinfo would look like the following lines.
pos: 0
flags: 02000000
mnt_id: 14
ino: 38
link_type: iter
link_id: 51
prog_tag: a590ac96db22b825
prog_id: 299
target_name: task_file
task_type: TID
tid: 1723
This patch add the last three fields. task_type is the type of the
task parameter. TID means the iterator visit only the thread
specified by tid. The value of tid in the above example is 1723. For
the case of PID task_type, it means the iterator visits only threads
of a process and will show the pid value of the process instead of a
tid.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20220926184957.208194-4-kuifeng@fb.com
Add new fields to bpf_link_info that users can query it through
bpf_obj_get_info_by_fd().
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20220926184957.208194-3-kuifeng@fb.com
Allow creating an iterator that loops through resources of one
thread/process.
People could only create iterators to loop through all resources of
files, vma, and tasks in the system, even though they were interested
in only the resources of a specific task or process. Passing the
additional parameters, people can now create an iterator to go
through all resources or only the resources of a task.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20220926184957.208194-2-kuifeng@fb.com
Drop the requirement for system-wide kernel UAPI headers to provide full
struct btf_enum64 definition. This is an unexpected requirement that
slipped in libbpf 1.0 and put unnecessary pressure ([0]) on users to have
a bleeding-edge kernel UAPI header from unreleased Linux 6.0.
To achieve this, we forward declare struct btf_enum64. But that's not
enough as there is btf_enum64_value() helper that expects to know the
layout of struct btf_enum64. So we get a bit creative with
reinterpreting memory layout as array of __u32 and accesing lo32/hi32
fields as array elements. Alternative way would be to have a local
pointer variable for anonymous struct with exactly the same layout as
struct btf_enum64, but that gets us into C++ compiler errors complaining
about invalid type casts. So play it safe, if ugly.
[0] Closes: https://github.com/libbpf/libbpf/issues/562
Fixes: d90ec262b35b ("libbpf: Add enum64 support for btf_dump")
Reported-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/bpf/20220927042940.147185-1-andrii@kernel.org
Since the tests are run in a function $@ there actually contains the
function arguments, not the script ones.
Pass "$@" to the function as well.
Fixes: 272d1f4cfa3c ("selftests: bpf: test_kmod.sh: Pass parameters to the module")
Signed-off-by: Yauheni Kaliuta <ykaliuta@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220926092320.564631-1-ykaliuta@redhat.com
When running rootless with special capabilities like:
FOWNER / DAC_OVERRIDE / DAC_READ_SEARCH
The "access" API will not make the proper check if there is really
access to a file or not.
>From the access man page:
"
The check is done using the calling process's real UID and GID, rather
than the effective IDs as is done when actually attempting an operation
(e.g., open(2)) on the file. Similarly, for the root user, the check
uses the set of permitted capabilities rather than the set of effective
capabilities; ***and for non-root users, the check uses an empty set of
capabilities.***
"
What that means is that for non-root user the access API will not do the
proper validation if the process really has permission to a file or not.
To resolve this this patch replaces all the access API calls with
faccessat with AT_EACCESS flag.
Signed-off-by: Jon Doron <jond@wiz.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220925070431.1313680-1-arilou@gmail.com
Song Liu says:
====================
Changes v1 => v2:
1. Update arch_prepare_bpf_dispatcher to use a RO image and a RW buffer.
(Alexei) Note: I haven't found an existing test to cover this part, so
this part was tested manually (comparing the generated dispatcher is
the same).
Jeff Layton reported CPA W^X warning linux-next [1]. It turns out to be
W^X issue with bpf trampoline and bpf dispatcher. Fix these by:
1. Use bpf_prog_pack for bpf_dispatcher;
2. Set memory permission properly with bpf trampoline.
[1] https://lore.kernel.org/lkml/c84cc27c1a5031a003039748c3c099732a718aec.camel@kernel.org/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Mark the trampoline as RO+X after arch_prepare_bpf_trampoline, so that
the trampoine follows W^X rule strictly. This will turn off warnings like
CPA refuse W^X violation: 8000000000000163 -> 0000000000000163 range: ...
Also remove bpf_jit_alloc_exec_page(), since it is not used any more.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20220926184739.3512547-3-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allocate bpf_dispatcher with bpf_prog_pack_alloc so that bpf_dispatcher
can share pages with bpf programs.
arch_prepare_bpf_dispatcher() is updated to provide a RW buffer as working
area for arch code to write to.
This also fixes CPA W^X warnning like:
CPA refuse W^X violation: 8000000000000163 -> 0000000000000163 range: ...
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20220926184739.3512547-2-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa says:
====================
Martynas reported bpf_get_func_ip returning +4 address when
CONFIG_X86_KERNEL_IBT option is enabled and I found there are
some failing bpf tests when this option is enabled.
The CONFIG_X86_KERNEL_IBT option adds endbr instruction at the
function entry, so the idea is to 'fix' entry ip for kprobe_multi
and trampoline probes, because they are placed on the function
entry.
v5 changes:
- updated uapi/linux/bpf.h headers with comment for
bpf_get_func_ip returning 0 [Andrii]
- added acks
v4 changes:
- used get_kernel_nofault to read previous instruction [Peter]
- used movabs instruction in trampoline comment [Peter]
- renamed fentry_ip argument in kprobe_multi_link_handler [Peter]
v3 changes:
- using 'unused' bpf function to get IBT config option
into selftest skeleton
- rebased to current bpf-next/master
- added ack/review from Masami
v2 changes:
- change kprobes get_func_ip to return zero for kprobes
attached within the function body [Andrii]
- detect IBT config and properly test kprobe with offset
[Andrii]
v1 changes:
- read previous instruction in kprobe_multi link handler
and adjust entry_ip for CONFIG_X86_KERNEL_IBT option
- split first patch into 2 separate changes
- update changelogs
====================
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With CONFIG_X86_KERNEL_IBT enabled the test for kprobe with offset
won't work because of the extra endbr instruction.
As suggested by Andrii adding CONFIG_X86_KERNEL_IBT detection
and using appropriate offset value based on that.
Also removing test7 program, because it does the same as test6.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changing return value of kprobe's version of bpf_get_func_ip
to return zero if the attach address is not on the function's
entry point.
For kprobes attached in the middle of the function we can't easily
get to the function address especially now with the CONFIG_X86_KERNEL_IBT
support.
If user cares about current IP for kprobes attached within the
function body, they can get it with PT_REGS_IP(ctx).
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Martynas reported bpf_get_func_ip returning +4 address when
CONFIG_X86_KERNEL_IBT option is enabled.
When CONFIG_X86_KERNEL_IBT is enabled we'll have endbr instruction
at the function entry, which screws return value of bpf_get_func_ip()
helper that should return the function address.
There's short term workaround for kprobe_multi bpf program made by
Alexei [1], but we need this fixup also for bpf_get_attach_cookie,
that returns cookie based on the entry_ip value.
Moving the fixup in the fprobe handler, so both bpf_get_func_ip
and bpf_get_attach_cookie get expected function address when
CONFIG_X86_KERNEL_IBT option is enabled.
Also renaming kprobe_multi_link_handler entry_ip argument to fentry_ip
so it's clearer this is an ftrace __fentry__ ip.
[1] commit 7f0059b58f02 ("selftests/bpf: Fix kprobe_multi test.")
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Using function address given at the generation time as the trampoline
ip argument. This way we get directly the function address that we
need, so we don't need to:
- read the ip from the stack
- subtract X86_PATCH_SIZE
- subtract ENDBR_INSN_SIZE if CONFIG_X86_KERNEL_IBT is enabled
which is not even implemented yet ;-)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Keeping the resolved 'addr' in kallsyms_callback, instead of taking
ftrace_location value, because we depend on symbol address in the
cookie related code.
With CONFIG_X86_KERNEL_IBT option the ftrace_location value differs
from symbol address, which screwes the symbol address cookies matching.
There are 2 users of this function:
- bpf_kprobe_multi_link_attach
for which this fix is for
- get_ftrace_locations
which is used by register_fprobe_syms
this function needs to get symbols resolved to addresses,
but does not need 'ftrace location addresses' at this point
there's another ftrace location translation in the path done
by ftrace_set_filter_ips call:
register_fprobe_syms
addrs = get_ftrace_locations
register_fprobe_ips(addrs)
...
ftrace_set_filter_ips
...
__ftrace_match_addr
ip = ftrace_location(ip);
...
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding KPROBE_FLAG_ON_FUNC_ENTRY kprobe flag to indicate that
attach address is on function entry. This is used in following
changes in get_func_ip helper to return correct function address.
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In sk_psock_backlog function, for ingress direction skb, if no new data
packet arrives after the skb is cached, the cached skb does not have a
chance to be added to the receive queue of psock. As a result, the cached
skb cannot be received by the upper-layer application. Fix this by reschedule
the psock work to dispose the cached skb in sk_msg_recvmsg function.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220907071311.60534-1-liujian56@huawei.com
Add one test for wait redirect sock's send memory test for sockmap.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220823133755.314697-3-liujian56@huawei.com
Andrii Nakryiko says:
====================
A small patch set adding few usability improvements and features making
veristat a more convenient tool to be used for work on BPF verifier:
- patch #2 speeds up and makes stats parsing from BPF verifier log more
robust;
- patch #3 makes veristat less strict about input object files; veristat
will ignore non-BPF ELF files;
- patch #4 adds progress log, by default, so that user doing
mass-verification is aware that veristat is not stuck;
- patch #5 allows to tune requested BPF verifier log level, which makes
veristat a simplest way to get BPF verifier log, especially successfully
verified ones.
v1->v2:
- don't emit progress in non-table mode, as it breaks CSV output.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add -l (--log-level) flag to override default BPF verifier log lever.
This only matters in verbose mode, which is the mode in which veristat
emits verifier log for each processed BPF program.
This is important because for successfully verified BPF programs
log_level 1 is empty, as BPF verifier truncates all the successfully
verified paths. So -l2 is the only way to actually get BPF verifier log
in practice. It looks sometihng like this:
[vmuser@archvm bpf]$ sudo ./veristat xdp_tx.bpf.o -vl2
Processing 'xdp_tx.bpf.o'...
PROCESSING xdp_tx.bpf.o/xdp_tx, DURATION US: 19, VERDICT: success, VERIFIER LOG:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
; return XDP_TX;
0: (b4) w0 = 3 ; R0_w=3
1: (95) exit
verification time 19 usec
stack depth 0
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
File Program Verdict Duration (us) Total insns Total states Peak states
------------ ------- ------- ------------- ----------- ------------ -----------
xdp_tx.bpf.o xdp_tx success 19 2 0 0
------------ ------- ------- ------------- ----------- ------------ -----------
Done. Processed 1 files, 0 programs. Skipped 1 files, 0 programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Emit "Processing <filepath>..." for each BPF object file to be
processed, to show progress. But also add -q (--quiet) flag to silence
such messages. Doing something more clever (like overwriting same output
line) is to cumbersome and easily breakable if there is any other
console output (e.g., errors from libbpf).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make veristat ignore non-BPF object files. This allows simpler
mass-verification (e.g., `sudo ./veristat *.bpf.o` in selftests/bpf
directory). Note that `sudo ./veristat *.o` would also work, but with
selftests's multiple copies of BPF object files (.bpf.o and
.bpf.linked{1,2,3}.o) it's 4x slower.
Also, given some of BPF object files could be incomplete in the sense
that they are meant to be statically linked into final BPF object file
(like linked_maps, linked_funcs, linked_vars), note such instances in
stderr, but proceed anyways. This seems like a better trade off between
completely silently ignoring BPF object file and aborting
mass-verification altogether.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make sure veristat doesn't spend ridiculous amount of time parsing
verifier stats from verifier log, especially for very large logs or
truncated logs (e.g., when verifier returns -ENOSPC due to too small
buffer). For this, parse lines from the end of the log and make sure we
parse only up to 100 last lines, where stats should be, if at all.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923175913.3272430-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When attach_prog_fd field was removed in libbpf 1.0 and replaced with
`long: 0` placeholder, it actually shifted all the subsequent fields by
8 byte. This is due to `long: 0` promising to adjust next field's offset
to long-aligned offset. But in this case we were already long-aligned
as pin_root_path is a pointer. So `long: 0` had no effect, and thus
didn't feel the gap created by removed attach_prog_fd.
Non-zero bitfield should have been used instead. I validated using
pahole. Originally kconfig field was at offset 40. With `long: 0` it's
at offset 32, which is wrong. With this change it's back at offset 40.
While technically libbpf 1.0 is allowed to break backwards
compatibility and applications should have been recompiled against
libbpf 1.0 headers, but given how trivial it is to preserve memory
layout, let's fix this.
Reported-by: Grant Seltzer Richman <grantseltzer@gmail.com>
Fixes: 146bf811f5ac ("libbpf: remove most other deprecated high-level APIs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923230559.666608-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The cgroup_hierarchical_stats selftest is complicated. It has to be,
because it tests an entire workflow of recording, aggregating, and
dumping cgroup stats. However, some of the complexity is unnecessary.
The test now enables the memory controller in a cgroup hierarchy, invokes
reclaim, measure reclaim time, THEN uses that reclaim time to test the
stats collection and aggregation. We don't need to use such a
complicated stat, as the context in which the stat is collected is
orthogonal.
Simplify the test by using a simple stat instead of reclaim time, the
total number of times a process has ever entered a cgroup. This makes
the test simpler and removes the dependency on the memory controller and
the memory reclaim interface.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20220919175330.890793-1-yosryahmed@google.com
Hou Tao says:
====================
From: Hou Tao <houtao1@huawei.com>
Hi,
It is just a tiny patch set aims to fix the resource leaks in test_maps
after test case succeeds or is skipped. And these leaks are spotted by
using address sanitizer and checking the content of /proc/$pid/fd.
Please see indiviual patch for more details.
Change Log:
v2:
* Add the missing header file unistd.h for close() (From kernel-patches/bpf)
The reason Why I miss that is that -Werror is removed from Makefile
when enabling clang address sanitizer.
v1:
* https://lore.kernel.org/bpf/20220921025855.115463-1-houtao@huaweicloud.com/T/
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Free the created fd or allocated bpf_object after test case succeeds,
else there will be resource leaks.
Spotted by using address sanitizer and checking the content of
/proc/$pid/fd directory.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220921070035.2016413-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Destroy the created skeleton when CONFIG_PREEMPT is off, else will be
resource leak.
Fixes: 73b97bc78b32 ("selftests/bpf: Test concurrent updates on bpf_task_storage_busy")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220921070035.2016413-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
