IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We currently deal with a set of booleans for VM features,
while they could be better represented as set of flags
contained in an unsigned long, similarily to what we are
doing on the CPU side.
Signed-off-by: Marc Zyngier <maz@kernel.org>
[Oliver: Flag-ify the 'ran_once' boolean]
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220311174001.605719-2-oupton@google.com
* kvm-arm64/psci-1.1:
: .
: Limited PSCI-1.1 support from Will Deacon:
:
: This small series exposes the PSCI SYSTEM_RESET2 call to guests, which
: allows the propagation of a "reset_type" and a "cookie" back to the VMM.
: Although Linux guests only ever pass 0 for the type ("SYSTEM_WARM_RESET"),
: the vendor-defined range can be used by a bootloader to provide additional
: information about the reset, such as an error code.
: .
KVM: arm64: Really propagate PSCI SYSTEM_RESET2 arguments to userspace
Signed-off-by: Marc Zyngier <maz@kernel.org>
Commit d43583b890e7 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the
guest") hooked up the SYSTEM_RESET2 PSCI call for guests but failed to
preserve its arguments for userspace, instead overwriting them with
zeroes via smccc_set_retval(). As Linux only passes zeroes for these
arguments, this appeared to be working for Linux guests. Oh well.
Don't call smccc_set_retval() for a SYSTEM_RESET2 heading to userspace
and instead set X0 (and only X0) explicitly to PSCI_RET_INTERNAL_FAILURE
just in case the vCPU re-enters the guest.
Fixes: d43583b890e7 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest")
Reported-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220309181308.982-1-will@kernel.org
* kvm-arm64/misc-5.18:
: .
: Misc fixes for KVM/arm64 5.18:
:
: - Drop unused kvm parameter to kvm_psci_version()
:
: - Implement CONFIG_DEBUG_LIST at EL2
:
: - Make CONFIG_ARM64_ERRATUM_2077057 default y
:
: - Only do the interrupt dance if we have exited because of an interrupt
:
: - Remove traces of 32bit ARM host support from the documentation
: .
Documentation: KVM: Update documentation to indicate KVM is arm64-only
KVM: arm64: Only open the interrupt window on exit due to an interrupt
KVM: arm64: Enable Cortex-A510 erratum 2077057 by default
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM support for 32-bit ARM hosts (KVM/arm) has been removed from the
kernel since commit 541ad0150ca4 ("arm: Remove 32bit KVM host
support"). There still exists some remnants of the old architecture in
the KVM documentation.
Remove all traces of 32-bit host support from the documentation. Note
that AArch32 guests are still supported.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220308172856.2997250-1-oupton@google.com
Now that we properly account for interrupts taken whilst the guest
was running, it becomes obvious that there is no need to open
this accounting window if we didn't exit because of an interrupt.
This saves a number of system register accesses and other barriers
if we exited for any other reason (such as a trap, for example).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220304135914.1464721-1-maz@kernel.org
The recently added configuration option for Cortex A510 erratum 2077057 does
not have a "default y" unlike other errata fixes. This appears to simply be
an oversight since the help text suggests enabling the option if unsure and
there's nothing in the commit log to suggest it is intentional.
Fixes: 1dd498e5e26ad ("KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata")
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220225184658.172527-1-broonie@kernel.org
* kvm-arm64/psci-1.1:
: .
: Limited PSCI-1.1 support from Will Deacon:
:
: This small series exposes the PSCI SYSTEM_RESET2 call to guests, which
: allows the propagation of a "reset_type" and a "cookie" back to the VMM.
: Although Linux guests only ever pass 0 for the type ("SYSTEM_WARM_RESET"),
: the vendor-defined range can be used by a bootloader to provide additional
: information about the reset, such as an error code.
: .
KVM: arm64: Remove unneeded semicolons
KVM: arm64: Indicate SYSTEM_RESET2 in kvm_run::system_event flags field
KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest
KVM: arm64: Bump guest PSCI version to 1.1
Signed-off-by: Marc Zyngier <maz@kernel.org>
When handling reset and power-off PSCI calls from the guest, we
initialise X0 to PSCI_RET_INTERNAL_FAILURE in case the VMM tries to
re-run the vCPU after issuing the call.
Unfortunately, this also means that the VMM cannot see which PSCI call
was issued and therefore cannot distinguish between PSCI SYSTEM_RESET
and SYSTEM_RESET2 calls, which is necessary in order to determine the
validity of the "reset_type" in X1.
Allocate bit 0 of the previously unused 'flags' field of the
system_event structure so that we can indicate the PSCI call used to
initiate the reset.
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220221153524.15397-4-will@kernel.org
PSCI v1.1 introduces the optional SYSTEM_RESET2 call, which allows the
caller to provide a vendor-specific "reset type" and "cookie" to request
a particular form of reset or shutdown.
Expose this call to the guest and handle it in the same way as PSCI
SYSTEM_RESET, along with some basic range checking on the type argument.
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220221153524.15397-3-will@kernel.org
Expose PSCI version v1.1 to the guest by default. The only difference
for now is that an updated version number is reported by PSCI_VERSION.
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220221153524.15397-2-will@kernel.org
* kvm-arm64/pmu-bl:
: .
: Improve PMU support on heterogeneous systems, courtesy of Alexandru Elisei
: .
KVM: arm64: Refuse to run VCPU if the PMU doesn't match the physical CPU
KVM: arm64: Add KVM_ARM_VCPU_PMU_V3_SET_PMU attribute
KVM: arm64: Keep a list of probed PMUs
KVM: arm64: Keep a per-VM pointer to the default PMU
perf: Fix wrong name in comment for struct perf_cpu_context
KVM: arm64: Do not change the PMU event filter after a VCPU has run
Signed-off-by: Marc Zyngier <maz@kernel.org>
Userspace can assign a PMU to a VCPU with the KVM_ARM_VCPU_PMU_V3_SET_PMU
device ioctl. If the VCPU is scheduled on a physical CPU which has a
different PMU, the perf events needed to emulate a guest PMU won't be
scheduled in and the guest performance counters will stop counting. Treat
it as an userspace error and refuse to run the VCPU in this situation.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-7-alexandru.elisei@arm.com
When KVM creates an event and there are more than one PMUs present on the
system, perf_init_event() will go through the list of available PMUs and
will choose the first one that can create the event. The order of the PMUs
in this list depends on the probe order, which can change under various
circumstances, for example if the order of the PMU nodes change in the DTB
or if asynchronous driver probing is enabled on the kernel command line
(with the driver_async_probe=armv8-pmu option).
Another consequence of this approach is that on heteregeneous systems all
virtual machines that KVM creates will use the same PMU. This might cause
unexpected behaviour for userspace: when a VCPU is executing on the
physical CPU that uses this default PMU, PMU events in the guest work
correctly; but when the same VCPU executes on another CPU, PMU events in
the guest will suddenly stop counting.
Fortunately, perf core allows user to specify on which PMU to create an
event by using the perf_event_attr->type field, which is used by
perf_init_event() as an index in the radix tree of available PMUs.
Add the KVM_ARM_VCPU_PMU_V3_CTRL(KVM_ARM_VCPU_PMU_V3_SET_PMU) VCPU
attribute to allow userspace to specify the arm_pmu that KVM will use when
creating events for that VCPU. KVM will make no attempt to run the VCPU on
the physical CPUs that share the PMU, leaving it up to userspace to manage
the VCPU threads' affinity accordingly.
To ensure that KVM doesn't expose an asymmetric system to the guest, the
PMU set for one VCPU will be used by all other VCPUs. Once a VCPU has run,
the PMU cannot be changed in order to avoid changing the list of available
events for a VCPU, or to change the semantics of existing events.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-6-alexandru.elisei@arm.com
The ARM PMU driver calls kvm_host_pmu_init() after probing to tell KVM that
a hardware PMU is available for guest emulation. Heterogeneous systems can
have more than one PMU present, and the callback gets called multiple
times, once for each of them. Keep track of all the PMUs available to KVM,
as they're going to be needed later.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-5-alexandru.elisei@arm.com
As we are about to allow selection of the PMU exposed to a guest, start by
keeping track of the default one instead of only the PMU version.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20220127161759.53553-4-alexandru.elisei@arm.com
Commit 0793a61d4df8 ("performance counters: core code") added the perf
subsystem (then called Performance Counters) to Linux, creating the struct
perf_cpu_context. The comment for the struct referred to it as a "struct
perf_counter_cpu_context".
Commit cdd6c482c9ff ("perf: Do the big rename: Performance Counters ->
Performance Events") changed the comment to refer to a "struct
perf_event_cpu_context", which was still the wrong name for the struct.
Change the comment to say "struct perf_cpu_context".
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-3-alexandru.elisei@arm.com
Userspace can specify which events a guest is allowed to use with the
KVM_ARM_VCPU_PMU_V3_FILTER attribute. The list of allowed events can be
identified by a guest from reading the PMCEID{0,1}_EL0 registers.
Changing the PMU event filter after a VCPU has run can cause reads of the
registers performed before the filter is changed to return different values
than reads performed with the new event filter in place. The architecture
defines the two registers as read-only, and this behaviour contradicts
that.
Keep track when the first VCPU has run and deny changes to the PMU event
filter to prevent this from happening.
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ Alexandru E: Added commit message, updated ioctl documentation ]
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-2-alexandru.elisei@arm.com
Currently the check functions are stubbed out at EL2. Implement
versions suitable for the constrained EL2 environment.
Signed-off-by: Keir Fraser <keirf@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220131124114.3103337-1-keirf@google.com
kvm_psci_version() consumes a pointer to struct kvm in addition to a
vcpu pointer. Drop the kvm pointer as it is unused. While the comment
suggests the explicit kvm pointer was useful for calling from hyp, there
exist no such callsite in hyp.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220208012705.640444-1-oupton@google.com
* kvm-arm64/selftest/vgic-5.18:
: .
: A bunch of selftest fixes, courtesy of Ricardo Koller
: .
kvm: selftests: aarch64: use a tighter assert in vgic_poke_irq()
kvm: selftests: aarch64: fix some vgic related comments
kvm: selftests: aarch64: fix the failure check in kvm_set_gsi_routing_irqchip_check
kvm: selftests: aarch64: pass vgic_irq guest args as a pointer
kvm: selftests: aarch64: fix assert in gicv3_access_reg
Signed-off-by: Marc Zyngier <maz@kernel.org>
vgic_poke_irq() checks that the attr argument passed to the vgic device
ioctl is sane. Make this check tighter by moving it to after the last
attr update.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reported-by: Reiji Watanabe <reijiw@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127030858.3269036-6-ricarkol@google.com
Fix the formatting of some comments and the wording of one of them (in
gicv3_access_reg).
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reported-by: Reiji Watanabe <reijiw@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127030858.3269036-5-ricarkol@google.com
kvm_set_gsi_routing_irqchip_check(expect_failure=true) is used to check
the error code returned by the kernel when trying to setup an invalid
gsi routing table. The ioctl fails if "pin >= KVM_IRQCHIP_NUM_PINS", so
kvm_set_gsi_routing_irqchip_check() should test the error only when
"intid >= KVM_IRQCHIP_NUM_PINS+32". The issue is that the test check is
"intid >= KVM_IRQCHIP_NUM_PINS", so for a case like "intid =
KVM_IRQCHIP_NUM_PINS" the test wrongly assumes that the kernel will
return an error. Fix this by using the right check.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reported-by: Reiji Watanabe <reijiw@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127030858.3269036-4-ricarkol@google.com
The guest in vgic_irq gets its arguments in a struct. This struct used
to fit nicely in a single register so vcpu_args_set() was able to pass
it by value by setting x0 with it. Unfortunately, this args struct grew
after some commits and some guest args became random (specically
kvm_supports_irqfd).
Fix this by passing the guest args as a pointer (after allocating some
guest memory for it).
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reported-by: Reiji Watanabe <reijiw@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127030858.3269036-3-ricarkol@google.com
The val argument in gicv3_access_reg can have any value when used for a
read, not necessarily 0. Fix the assert by checking val only for
writes.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reported-by: Reiji Watanabe <reijiw@google.com>
Cc: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127030858.3269036-2-ricarkol@google.com
* kvm-arm64/vmid-allocator:
: .
: VMID allocation rewrite from Shameerali Kolothum Thodi, paving the
: way for pinned VMIDs and SVA.
: .
KVM: arm64: Make active_vmids invalid on vCPU schedule out
KVM: arm64: Align the VMID allocation with the arm64 ASID
KVM: arm64: Make VMID bits accessible outside of allocator
KVM: arm64: Introduce a new VMID allocator for KVM
Signed-off-by: Marc Zyngier <maz@kernel.org>
Like ASID allocator, we copy the active_vmids into the
reserved_vmids on a rollover. But it's unlikely that
every CPU will have a vCPU as current task and we may
end up unnecessarily reserving the VMID space.
Hence, set active_vmids to an invalid one when scheduling
out a vCPU.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211122121844.867-5-shameerali.kolothum.thodi@huawei.com
At the moment, the VMID algorithm will send an SGI to all the
CPUs to force an exit and then broadcast a full TLB flush and
I-Cache invalidation.
This patch uses the new VMID allocator. The benefits are:
- Aligns with arm64 ASID algorithm.
- CPUs are not forced to exit at roll-over. Instead,
the VMID will be marked reserved and context invalidation
is broadcasted. This will reduce the IPIs traffic.
- More flexible to add support for pinned KVM VMIDs in
the future.
With the new algo, the code is now adapted:
- The call to update_vmid() will be done with preemption
disabled as the new algo requires to store information
per-CPU.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211122121844.867-4-shameerali.kolothum.thodi@huawei.com
Since we already set the kvm_arm_vmid_bits in the VMID allocator
init function, make it accessible outside as well so that it can
be used in the subsequent patch.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211122121844.867-3-shameerali.kolothum.thodi@huawei.com
A new VMID allocator for arm64 KVM use. This is based on
arm64 ASID allocator algorithm.
One major deviation from the ASID allocator is the way we
flush the context. Unlike ASID allocator, we expect less
frequent rollover in the case of VMIDs. Hence, instead of
marking the CPU as flush_pending and issuing a local context
invalidation on the next context switch, we broadcast TLB
flush + I-cache invalidation over the inner shareable domain
on rollover.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211122121844.867-2-shameerali.kolothum.thodi@huawei.com
* kvm-arm64/fpsimd-doc:
: .
: FPSIMD documentation update, courtesy of Mark Brown
: .
arm64/fpsimd: Clarify the purpose of using last in fpsimd_save()
KVM: arm64: Add some more comments in kvm_hyp_handle_fpsimd()
KVM: arm64: Add comments for context flush and sync callbacks
Signed-off-by: Marc Zyngier <maz@kernel.org>
When saving the floating point context in fpsimd_save() we always reference
the state using last-> rather than using current->. Looking at the FP code
in isolation the reason for this is not entirely obvious, it's done because
when KVM is running it will bind the guest context and rely on the host
writing out the guest state on context switch away from the guest.
There's a slight trick here in that KVM still uses TIF_FOREIGN_FPSTATE and
TIF_SVE to communicate what needs to be saved, it maintains those flags
and restores them when it is done running the guest so that the normal
restore paths function when we return back to userspace.
Add a comment to explain this to help future readers work out what's going
on a bit faster.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220124161115.115200-1-broonie@kernel.org
The handling for FPSIMD/SVE traps is multi stage and involves some trap
manipulation which isn't quite so immediately obvious as might be desired
so add a few more comments.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220124155720.3943374-3-broonie@kernel.org
Add a little bit of information on where _ctxflush_fp() and _ctxsync_fp()
are called to help people unfamiliar with the code get up to speed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220124155720.3943374-2-broonie@kernel.org
* kvm-arm64/mmu-rwlock:
: .
: MMU locking optimisations from Jing Zhang, allowing permission
: relaxations to occur in parallel.
: .
KVM: selftests: Add vgic initialization for dirty log perf test for ARM
KVM: arm64: Add fast path to handle permission relaxation during dirty logging
KVM: arm64: Use read/write spin lock for MMU protection
Signed-off-by: Marc Zyngier <maz@kernel.org>
For ARM64, if no vgic is setup before the dirty log perf test, the
userspace irqchip would be used, which would affect the dirty log perf
test result.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220118015703.3630552-4-jingzhangos@google.com
To reduce MMU lock contention during dirty logging, all permission
relaxation operations would be performed under read lock.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220118015703.3630552-3-jingzhangos@google.com
Replace MMU spinlock with rwlock and update all instances of the lock
being acquired with a write lock acquisition.
Future commit will add a fast path for permission relaxation during
dirty logging under a read lock.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220118015703.3630552-2-jingzhangos@google.com
* kvm-arm64/oslock:
: .
: Debug OS-Lock emulation courtesy of Oliver Upton. From the cover letter:
:
: "KVM does not implement the debug architecture to the letter of the
: specification. One such issue is the fact that KVM treats the OS Lock as
: RAZ/WI, rather than emulating its behavior on hardware. This series adds
: emulation support for the OS Lock to KVM. Emulation is warranted as the
: OS Lock affects debug exceptions taken from all ELs, and is not limited
: to only the context of the guest."
: .
selftests: KVM: Test OS lock behavior
selftests: KVM: Add OSLSR_EL1 to the list of blessed regs
KVM: arm64: Emulate the OS Lock
KVM: arm64: Allow guest to set the OSLK bit
KVM: arm64: Stash OSLSR_EL1 in the cpu context
KVM: arm64: Correctly treat writes to OSLSR_EL1 as undefined
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM now correctly handles the OS Lock for its guests. When set, KVM
blocks all debug exceptions originating from the guest. Add test cases
to the debug-exceptions test to assert that software breakpoint,
hardware breakpoint, watchpoint, and single-step exceptions are in fact
blocked.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-7-oupton@google.com
OSLSR_EL1 is now part of the visible system register state. Add it to
the get-reg-list selftest to ensure we keep it that way.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-6-oupton@google.com
The OS lock blocks all debug exceptions at every EL. To date, KVM has
not implemented the OS lock for its guests, despite the fact that it is
mandatory per the architecture. Simple context switching between the
guest and host is not appropriate, as its effects are not constrained to
the guest context.
Emulate the OS Lock by clearing MDE and SS in MDSCR_EL1, thereby
blocking all but software breakpoint instructions.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-5-oupton@google.com
Allow writes to OSLAR and forward the OSLK bit to OSLSR. Do nothing with
the value for now.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-4-oupton@google.com
An upcoming change to KVM will emulate the OS Lock from the PoV of the
guest. Add OSLSR_EL1 to the cpu context and handle reads using the
stored value. Define some mnemonics for for handling the OSLM field and
use them to make the reset value of OSLSR_EL1 more readable.
Wire up a custom handler for writes from userspace and prevent any of
the invariant bits from changing. Note that the OSLK bit is not
invariant and will be made writable by the aforementioned change.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-3-oupton@google.com
Writes to OSLSR_EL1 are UNDEFINED and should never trap from EL1 to
EL2, but the kvm trap handler for OSLSR_EL1 handles writes via
ignore_write(). This is confusing to readers of code, but should have
no functional impact.
For clarity, use write_to_read_only() rather than ignore_write(). If a
trap is unexpectedly taken to EL2 in violation of the architecture, this
will WARN_ONCE() and inject an undef into the guest.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
[adopted Mark's changelog suggestion, thanks!]
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-2-oupton@google.com
fix regression introduced as part of moving to the new mount API.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmH7/AUACgkQ8vlZVpUN
gaOsuQf/TFH8QNBSeEkT5ybnrS51KGTv88mdUVMcsmSMhmAFxiGJLFtMLFu9LG7b
bJYCg+Q9Rieb1qqqtGNyLe4p3ewShSzBFu8p7hzKMfu0EEcrJwTYVywSX0oYhMMm
9o+V6CPcGYVZtImihdsmDvgMRRkzoevHQFx+OLhkaq4Qd9ZEdohchYIhRFNXwd+w
CJiL0TFAnrb4QfWgtq3HyY7aoQumf8YI15C+RTfykzCBhZRFRKXjVXPdIjfGe4O2
Fpjr4gSsgYK0Er0LLJvESeFFVpFz+NV7q9W/Vj5ahaKJDpiVGzL/OPZsnafzHPPy
CSa+iP3ZLcTb+KRTOZ1mgjvS34Cmyw==
=DpdZ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4 fast commit and inline data handling.
Also fix regression introduced as part of moving to the new mount API"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs/ext4: fix comments mentioning i_mutex
ext4: fix incorrect type issue during replay_del_range
jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
ext4: fix potential NULL pointer dereference in ext4_fill_super()
jbd2: refactor wait logic for transaction updates into a common function
jbd2: cleanup unused functions declarations from jbd2.h
ext4: fix error handling in ext4_fc_record_modified_inode()
ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
ext4: fix error handling in ext4_restore_inline_data()
ext4: fast commit may miss file actions
ext4: fast commit may not fallback for ineligible commit
ext4: modify the logic of ext4_mb_new_blocks_simple
ext4: prevent used blocks from being allocated during fast commit replay
