IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For some ICs, packets can't be sent correctly without initializing
CMAC table first. Previous flow do this initialization after
associated, results in authentication response fails to transmit.
Move the initialization up front to a proper place to solve this.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230216082807.22285-1-pkshih@realtek.com
Use power state to decide whether we can enter or leave IPS accurately,
and then prevent to power on/off twice.
The commit 6bf3a083407b ("wifi: rtw88: add flag check before enter or leave IPS")
would like to prevent this as well, but it still can't entirely handle all
cases. The exception is that WiFi gets connected and does suspend/resume,
it will power on twice and cause it failed to power on after resuming,
like:
rtw_8723de 0000:03:00.0: failed to poll offset=0x6 mask=0x2 value=0x2
rtw_8723de 0000:03:00.0: mac power on failed
rtw_8723de 0000:03:00.0: failed to power on mac
rtw_8723de 0000:03:00.0: leave idle state failed
rtw_8723de 0000:03:00.0: failed to leave ips state
rtw_8723de 0000:03:00.0: failed to leave idle state
rtw_8723de 0000:03:00.0: failed to send h2c command
To fix this, introduce new flag RTW_FLAG_POWERON to reflect power state,
and call rtw_mac_pre_system_cfg() to configure registers properly between
power-off/-on.
Reported-by: Paul Gover <pmw.gover@yahoo.co.uk>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217016
Fixes: 6bf3a083407b ("wifi: rtw88: add flag check before enter or leave IPS")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230216053633.20366-1-pkshih@realtek.com
* EHT channel puncturing support (client & AP)
* some support for AP MLD without mac80211
* fixes for A-MSDU on mesh connections
Major driver changes:
iwlwifi
* EHT rate reporting
* Bump FW API to 74 for AX devices
* STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware
mt76
* switch to using page pool allocator
* mt7996 EHT (Wi-Fi 7) support
* Wireless Ethernet Dispatch (WED) reset support
libertas
* WPS enrollee support
brcmfmac
* Rename Cypress 89459 to BCM4355
* BCM4355 and BCM4377 support
mwifiex
* SD8978 chipset support
rtl8xxxu
* LED support
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
-----BEGIN PGP SIGNATURE-----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=p6+A
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Major stack changes:
* EHT channel puncturing support (client & AP)
* some support for AP MLD without mac80211
* fixes for A-MSDU on mesh connections
Major driver changes:
iwlwifi
* EHT rate reporting
* Bump FW API to 74 for AX devices
* STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware
mt76
* switch to using page pool allocator
* mt7996 EHT (Wi-Fi 7) support
* Wireless Ethernet Dispatch (WED) reset support
libertas
* WPS enrollee support
brcmfmac
* Rename Cypress 89459 to BCM4355
* BCM4355 and BCM4377 support
mwifiex
* SD8978 chipset support
rtl8xxxu
* LED support
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
* tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
wifi: brcmfmac: p2p: Introduce generic flexible array frame member
wifi: mac80211: add documentation for amsdu_mesh_control
wifi: cfg80211: remove gfp parameter from cfg80211_obss_color_collision_notify description
wifi: mac80211: always initialize link_sta with sta
wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()
wifi: cfg80211: Set SSID if it is not already set
wifi: rtw89: move H2C of del_pkt_offload before polling FW status ready
wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status()
wifi: rtw88: usb: drop now unnecessary URB size check
wifi: rtw88: usb: send Zero length packets if necessary
wifi: rtw88: usb: Set qsel correctly
wifi: mac80211: fix off-by-one link setting
wifi: mac80211: Fix for Rx fragmented action frames
wifi: mac80211: avoid u32_encode_bits() warning
wifi: mac80211: Don't translate MLD addresses for multicast
wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint
wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify
wifi: nl80211: Allow authentication frames and set keys on NAN interface
wifi: mac80211: fix non-MLO station association
wifi: mac80211: Allow NSS change only up to capability
...
====================
Link: https://lore.kernel.org/r/20230216105406.208416-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer says:
====================
seg6: add PSP flavor support for SRv6 End behavior
Segment Routing for IPv6 (SRv6 in short) [1] is the instantiation of the
Segment Routing (SR) [2] architecture on the IPv6 dataplane.
In SRv6, the segment identifiers (SID) are IPv6 addresses and the segment list
(SID List) is carried in the Segment Routing Header (SRH). A segment may be
bound to a specific packet processing operation called "behavior". The RFC8986
[3] defines and standardizes the most common/relevant behaviors for network
operators, e.g., End, End.X and End.T and so on.
The RFC8986 also introduces the "flavors" framework aiming to modify or extend
the capabilities of SRv6 End, End.X and End.T behaviors. Specifically, these
behaviors support the following flavors (either individually or in
combinations):
- Penultimate Segment Pop (PSP);
- Ultimate Segment Pop (USP);
- Ultimate Segment Decapsulation (USD).
Such flavors enable an End/End.X/End.T behavior to pop the SRH on the
penultimate/ultimate SR endpoint node listed in the SID List or to perform a
full decapsulation.
Currently, the Linux kernel supports a large subset of behaviors described in
RFC8986, including the End, End.X and End.T. However, PSP, USP and USD flavors
have not yet been implemented.
In this patchset, we extend the SRv6 subsystem to implement the PSP flavor in
the SRv6 End behavior. To accomplish this task, we leverage the flavor
framework previously introduced by another patchset required for supporting the
efficient representation of the SID List through the NEXT-C-SID mechanism [4].
In details, the patchset is made of:
- patch 1/3: seg6: factor out End lookup nexthop processing to a dedicated
function
- patch 2/3: seg6: add PSP flavor support for SRv6 End behavior
- patch 3/3: selftests: seg6: add selftest for PSP flavor in SRv6 End
behavior
From the user space perspective, we do not need to change the iproute2 code to
support the PSP flavor. However, we provide the man page for the PSP flavor in
a separate patch.
Comments, improvements and suggestions are always appreciated.
[1] - RFC8754: https://datatracker.ietf.org/doc/html/rfc8754
[2] - RFC8402: https://datatracker.ietf.org/doc/html/rfc8402
[3] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986
[4] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
====================
Link: https://lore.kernel.org/r/20230215134659.7613-1-andrea.mayer@uniroma2.it
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This selftest is designed for testing the PSP flavor in SRv6 End behavior.
It instantiates a virtual network composed of several nodes: hosts and
SRv6 routers. Each node is realized using a network namespace that is
properly interconnected to others through veth pairs.
The test makes use of the SRv6 End behavior and of the PSP flavor needed
for removing the SRH from the IPv6 header at the penultimate node.
The correct execution of the behavior is verified through reachability
tests carried out between hosts.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The "flavors" framework defined in RFC8986 [1] represents additional
operations that can modify or extend a subset of existing behaviors such as
SRv6 End, End.X and End.T. We report these flavors hereafter:
- Penultimate Segment Pop (PSP);
- Ultimate Segment Pop (USP);
- Ultimate Segment Decapsulation (USD).
Depending on how the Segment Routing Header (SRH) has to be handled, an
SRv6 End* behavior can support these flavors either individually or in
combinations.
In this patch, we only consider the PSP flavor for the SRv6 End behavior.
A PSP enabled SRv6 End behavior is used by the Source/Ingress SR node
(i.e., the one applying the SRv6 Policy) when it needs to instruct the
penultimate SR Endpoint node listed in the SID List (carried by the SRH) to
remove the SRH from the IPv6 header.
Specifically, a PSP enabled SRv6 End behavior processes the SRH by:
i) decreasing the Segment Left (SL) from 1 to 0;
ii) copying the Last Segment IDentifier (SID) into the IPv6 Destination
Address (DA);
iii) removing (i.e., popping) the outer SRH from the extension headers
following the IPv6 header.
It is important to note that PSP operation (steps i, ii, iii) takes place
only at a penultimate SR Segment Endpoint node (i.e., when the SL=1) and
does not happen at non-penultimate Endpoint nodes. Indeed, when a SID of
PSP flavor is processed at a non-penultimate SR Segment Endpoint node, the
PSP operation is not performed because it would not be possible to decrease
the SL from 1 to 0.
SL=2 SL=1 SL=0
| | |
For example, given the SRv6 policy (SID List := < X, Y, Z >):
- a PSP enabled SRv6 End behavior bound to SID "Y" will apply the PSP
operation as Segment Left (SL) is 1, corresponding to the Penultimate
Segment of the SID List;
- a PSP enabled SRv6 End behavior bound to SID "X" will *NOT* apply the
PSP operation as the Segment Left is 2. This behavior instance will
apply the "standard" End packet processing, ignoring the configured PSP
flavor at all.
[1] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The End nexthop lookup/input operations are moved into a new helper
function named input_action_end_finish(). This avoids duplicating the
code needed to compute the nexthop in the different flavors of the End
behavior.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alejandro Lucero says:
====================
sfc: devlink support for ef100
This patchset adds devlink port support for ef100 allowing setting VFs
mac addresses through the VF representor devlink ports.
Basic devlink infrastructure is first introduced, then support for info
command. Next changes for enumerating MAE ports which will be used for
devlink port creation when netdevs are registered.
Adding support for devlink port_function_hw_addr_get requires changes in
the ef100 driver for getting the mac address based on a client handle.
This allows to obtain VFs mac addresses during netdev initialization as
well what is included in patch 6.
Such client handle is used in patches 7 and 8 for getting and setting
devlink port addresses.
====================
Link: https://lore.kernel.org/r/20230215090828.11697-1-alejandro.lucero-palau@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Using the builtin client handle id infrastructure, add support for
setting the mac address linked to mports in ef100. This implies to
execute an MCDI command for giving the address to the firmware for
the specific devlink port.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Using the builtin client handle id infrastructure, add support for
obtaining the mac address linked to mports in ef100. This implies
to execute an MCDI command for getting the data from the firmware
for each devlink port.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Getting device mac address is currently based on a specific MCDI command
only available for the PF. This patch changes the MCDI command to a
generic one for PFs and VFs based on a client handle. This allows both
PFs and VFs to ask for their mac address during initialization using the
CLIENT_HANDLE_SELF.
Moreover, the patch allows other client handles which will be used by
the PF to ask for mac addresses linked to VFs. This is necessary for
suporting the port_function_hw_addr_get devlink function in further
patches.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Using the data when enumerating mports, create devlink ports just before
netdevs are registered and remove those devlink ports after netdev has
been unregistered.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Obtaining mport id is based on asking the firmware about it. This is
still needed for mport initialization itself, but once the mport data is
now kept by the driver, further mport id request can be satisfied
internally without firmware interaction.
Previous function is just modified in name making clear the firmware
interaction. The new function uses the old name and looks for the data
in the mport data structure.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
MAE ports (mports) are the ports on the EF100 embedded switch such
as networking PCIe functions, the physical port, and potentially
others.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add devlink info support for ef100. The information reported is obtained
through the MCDI interface with the specific meaning defined in new
documentation file.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add devlink infrastructure support. Further patches add devlink
info and devlink port support.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pedro Tammela says:
====================
net/sched: transition actions to pcpu stats and rcu
Following the work done for act_pedit[0], transition the remaining tc
actions to percpu stats and rcu, whenever possible.
Percpu stats make updating the action stats very cheap, while combining
it with rcu action parameters makes it possible to get rid of the per
action lock in the datapath.
For act_connmark and act_nat we run the following tests:
- tc filter add dev ens2f0 ingress matchall action connmark
- tc filter add dev ens2f0 ingress matchall action nat ingress any 10.10.10.10
Our setup consists of a 26 cores Intel CPU and a 25G NIC.
We use TRex to shoot 10mpps TCP packets and take perf measurements.
Both actions improved performance as expected since the datapath lock disappeared.
For act_pedit we move the drop counter to percpu, when available.
For act_gate we move the counters to percpu, when available.
[0] https://lore.kernel.org/all/20230131145149.3776656-1-pctammela@mojatatu.com/
====================
Link: https://lore.kernel.org/r/20230214211534.735718-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since act_pedit now has access to percpu counters, use the
tcf_action_inc_overlimit_qstats wrapper that will use the percpu
counter whenever they are available.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tc action act_gate was using shared stats, move it to percpu stats.
tdc results:
1..12
ok 1 5153 - Add gate action with priority and sched-entry
ok 2 7189 - Add gate action with base-time
ok 3 a721 - Add gate action with cycle-time
ok 4 c029 - Add gate action with cycle-time-ext
ok 5 3719 - Replace gate base-time action
ok 6 d821 - Delete gate action with valid index
ok 7 3128 - Delete gate action with invalid index
ok 8 7837 - List gate actions
ok 9 9273 - Flush gate actions
ok 10 c829 - Add gate action with duplicate index
ok 11 3043 - Add gate action with invalid index
ok 12 2930 - Add gate action with cookie
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tc action act_connmark was using shared stats and taking the per
action lock in the datapath. Improve it by using percpu stats and rcu.
perf before:
- 13.55% tcf_connmark_act
- 81.18% _raw_spin_lock
80.46% native_queued_spin_lock_slowpath
perf after:
- 2.85% tcf_connmark_act
tdc results:
1..15
ok 1 2002 - Add valid connmark action with defaults
ok 2 56a5 - Add valid connmark action with control pass
ok 3 7c66 - Add valid connmark action with control drop
ok 4 a913 - Add valid connmark action with control pipe
ok 5 bdd8 - Add valid connmark action with control reclassify
ok 6 b8be - Add valid connmark action with control continue
ok 7 d8a6 - Add valid connmark action with control jump
ok 8 aae8 - Add valid connmark action with zone argument
ok 9 2f0b - Add valid connmark action with invalid zone argument
ok 10 9305 - Add connmark action with unsupported argument
ok 11 71ca - Add valid connmark action and replace it
ok 12 5f8f - Add valid connmark action with cookie
ok 13 c506 - Replace connmark with invalid goto chain control
ok 14 6571 - Delete connmark action with valid index
ok 15 3426 - Delete connmark action with invalid index
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tc action act_nat was using shared stats and taking the per action
lock in the datapath. Improve it by using percpu stats and rcu.
perf before:
- 10.48% tcf_nat_act
- 81.83% _raw_spin_lock
81.08% native_queued_spin_lock_slowpath
perf after:
- 0.48% tcf_nat_act
tdc results:
1..27
ok 1 7565 - Add nat action on ingress with default control action
ok 2 fd79 - Add nat action on ingress with pipe control action
ok 3 eab9 - Add nat action on ingress with continue control action
ok 4 c53a - Add nat action on ingress with reclassify control action
ok 5 76c9 - Add nat action on ingress with jump control action
ok 6 24c6 - Add nat action on ingress with drop control action
ok 7 2120 - Add nat action on ingress with maximum index value
ok 8 3e9d - Add nat action on ingress with invalid index value
ok 9 f6c9 - Add nat action on ingress with invalid IP address
ok 10 be25 - Add nat action on ingress with invalid argument
ok 11 a7bd - Add nat action on ingress with DEFAULT IP address
ok 12 ee1e - Add nat action on ingress with ANY IP address
ok 13 1de8 - Add nat action on ingress with ALL IP address
ok 14 8dba - Add nat action on egress with default control action
ok 15 19a7 - Add nat action on egress with pipe control action
ok 16 f1d9 - Add nat action on egress with continue control action
ok 17 6d4a - Add nat action on egress with reclassify control action
ok 18 b313 - Add nat action on egress with jump control action
ok 19 d9fc - Add nat action on egress with drop control action
ok 20 a895 - Add nat action on egress with DEFAULT IP address
ok 21 2572 - Add nat action on egress with ANY IP address
ok 22 37f3 - Add nat action on egress with ALL IP address
ok 23 6054 - Add nat action on egress with cookie
ok 24 79d6 - Add nat action on ingress with cookie
ok 25 4b12 - Replace nat action with invalid goto chain control
ok 26 b811 - Delete nat action with valid index
ok 27 a521 - Delete nat action with invalid index
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jesse Brandeburg says:
====================
net/core: commmon prints for promisc
Add a print to the kernel log for allmulticast entry and exit, and
standardize the print for entry and exit of promiscuous mode.
These prints are useful to both user and developer and should have the
triggering driver/bus/device info that netdev_info (optionally) gives.
====================
Link: https://lore.kernel.org/r/20230214210117.23123-1-jesse.brandeburg@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The kernel stack can be more consistent by printing the IFF_PROMISC
aka promiscuous enable/disable messages with the standard netdev_info
message which can include bus and driver info as well as the device.
typical command usage from user space looks like:
ip link set eth0 promisc <on|off>
But lots of utilities such as bridge, tcpdump, etc put the interface into
promiscuous mode.
old message:
[ 406.034418] device eth0 entered promiscuous mode
[ 408.424703] device eth0 left promiscuous mode
new message:
[ 406.034431] ice 0000:17:00.0 eth0: entered promiscuous mode
[ 408.424715] ice 0000:17:00.0 eth0: left promiscuous mode
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the user sets or clears the IFF_ALLMULTI flag in the netdev, there are
no log messages printed to the kernel log to indicate anything happened.
This is inexplicably different from most other dev->flags changes, and
could suprise the user.
Typically this occurs from user-space when a user:
ip link set eth0 allmulticast <on|off>
However, other devices like bridge set allmulticast as well, and many
other flows might trigger entry into allmulticast as well.
The new message uses the standard netdev_info print and looks like:
[ 413.246110] ixgbe 0000:17:00.0 eth0: entered allmulticast mode
[ 415.977184] ixgbe 0000:17:00.0 eth0: left allmulticast mode
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Silence run-time memcpy() false positive warning when processing
management frames:
memcpy: detected field-spanning write (size 27) of single field "&mgmt_frame->u" at drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c:1469 (size 26)
Due to this (soon to be fixed) GCC bug[1], FORTIFY_SOURCE (via
__builtin_dynamic_object_size) doesn't recognize that the union may end
with a flexible array, and returns "26" (the fixed size of the union),
rather than the remaining size of the allocation. Add an explicit
flexible array member and set it as the destination here, so that we
get the correct coverage for the memcpy().
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101832
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Brian Henriquez <brian.henriquez@cypress.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: SHA-cyfmac-dev-list@infineon.com
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230215224110.never.022-kees@kernel.org
[rename 'frame' to 'body']
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jamal Hadi Salim says:
====================
net/sched: Retire some tc qdiscs and classifiers
The CBQ + dsmark qdiscs and the tcindex + rsvp classifiers have served us for
over 2 decades. Unfortunately, they have not been getting much attention due
to reduced usage. While we dont have a good metric for tabulating how much use
a specific kernel feature gets, for these specific features we observed that
some of the functionality has been broken for some time and no users complained.
In addition, syzkaller has been going to town on most of these and finding
issues; and while we have been fixing those issues, at times it becomes obvious
that we would need to perform bigger surgeries to resolve things found while
getting a syzkaller fix in place. After some discussion we feel that in order
to reduce the maintenance burden it is best to retire them.
This patchset leaves the UAPI alone. I could send another version which deletes
the UAPI as well. AFAIK, this has not been done before - so it wasnt clear what
how to handle UAPI. It seems legit to just delete it but we would need to
coordinate with iproute2 (given they sync up with kernel uapi headers). There
are probably other users we don't know of that copy kernel headers.
If folks feel differently I will resend the patches deleting UAPI for these
qdiscs and classifiers.
I will start another thread on iproute2 before sending any patches to iproute2.
====================
Link: https://lore.kernel.org/r/20230214134915.199004-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The rsvp classifier has served us well for about a quarter of a century but has
has not been getting much maintenance attention due to lack of known users.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tcindex classifier has served us well for about a quarter of a century
but has not been getting much TLC due to lack of known users. Most recently
it has become easy prey to syzkaller. For this reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The dsmark qdisc has served us well over the years for diffserv but has not
been getting much attention due to other more popular approaches to do diffserv
services. Most recently it has become a shooting target for syzkaller. For this
reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ATM qdisc has served us well over the years but has not been getting much
TLC due to lack of known users. Most recently it has become a shooting target
for syzkaller. For this reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While this amazing qdisc has served us well over the years it has not been
getting any tender love and care and has bitrotted over time.
It has become mostly a shooting target for syzkaller lately.
For this reason, we are retiring it. Goodbye CBQ - we loved you.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Steen Hegelund says:
====================
Adding Sparx5 ES0 VCAP support
This provides the Egress Stage 0 (ES0) VCAP (Versatile Content-Aware
Processor) support for the Sparx5 platform.
The ES0 VCAP is an Egress Access Control VCAP that uses frame keyfields and
previously classified keyfields to add, rewrite or remove VLAN tags on the
egress frames, and is therefore often referred to as the rewriter.
The ES0 VCAP also supports trapping frames to the host.
The ES0 VCAP has 1 lookup accessible with this chain id:
- chain 10000000: ES0 Lookup 0
The ES0 VCAP does not do traffic classification to select a keyset, but it
does have two keysets that can be used on all traffic. For now only the
ISDX keyset is used.
The ES0 VCAP can match on an ISDX key (Ingress Service Index) as one of the
frame metadata keyfields, similar to the ES2 VCAP.
The ES0 VCAP uses external counters in the XQS (statistics) group.
====================
Link: https://lore.kernel.org/r/20230214104049.1553059-1-steen.hegelund@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This provides these 3 actions for rule in the ES0 VCAP:
- action vlan pop
- action vlan modify id X priority Y
- action vlan push id X priority Y protocol Z
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This enables the TC command to use the Sparx5 ES0 VCAP, and handling of
rule links between IS0 and ES0.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds the ES0 VCAP port keyset configuration for Sparx5.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This provides access to the ES0 VCAP register targets
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This provides the VCAP model for the Sparx5 ES0 (Egress Stage 0) VCAP.
This VCAP provides rewriting functionality in the egress path.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ensure that an error is returned if the VCAP instance was not found.
The chain offset (diff) is allowed to be zero as this just means that the
user did not request rules to be linked.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This improves the check performed on linked rules when enabling or
disabling them. The chain id used must be the chain id without the offset
used for linking the rules.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This changes the TPID of the egress frames to use the TPID stored in the
IFH (internal frame header), which ensures that this is the TPID classified
for the frame at ingress.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The rule counter must be cleared when creating a new rule, even if the VCAP
lookup is currently disabled.
This ensures that rules located in VCAPs that use external counters (such
as Sparx5 IS2 and ES0) will have their counter reset even if the VCAP
lookup is not enabled at the moment.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Fixes: 95fa74148daa ("net: microchip: sparx5: Reset VCAP counter for new rules")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A valid frame should never use a multicast address as its source MAC
address, so discard these invalid frames.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-02-14 (ice)
This series contains updates to ice driver only.
Karol extends support for GPIO pins to E823 devices.
Daniel Vacek stops processing of PTP packets when link is down.
Pawel adds support for BIG TCP for IPv6.
Tony changes return type of ice_vsi_realloc_stat_arrays() as it always
returns success.
Zhu Yanjun updates kdoc stating supported TLVs.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Mention CEE DCBX in code comment
ice: Change ice_vsi_realloc_stat_arrays() to void
ice: add support BIG TCP on IPv6
ice/ptp: fix the PTP worker retrying indefinitely if the link went down
ice: Add GPIO pin support for E823 products
====================
Link: https://lore.kernel.org/r/20230214213003.2117125-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling problems for Documentation/core-api/packing.rst as
reported by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Link: https://lore.kernel.org/r/20230215053738.11562-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The schema had snps,reset-delay-us as dependent on snps,reset-gpio. The
actual property is called snps,reset-delays-us, so fix this to catch any
devicetree defining snsps,reset-delays-us without snps,reset-gpio.
Fixes: 7db3545aef5f ("dt-bindings: net: stmmac: Convert the binding to a schemas")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230214171505.224602-1-ahalaney@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
remove temporary files created by 'mirred_egress_to_ingress_tcp' test
in the cleanup() handler. Also, change variable names to avoid clashing
with globals from lib.sh.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/091649045a017fc00095ecbb75884e5681f7025f.1676368027.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the basic ethtool ops get_drvinfo and get_link for ngbe and txgbe.
Ngbe implements get_link_ksettings, nway_reset and set_link_ksettings
for free using phylib code.
The code related to the physical interface is not yet fully implemented
in txgbe using phylink code. So do not implement get_link_ksettings,
nway_reset and set_link_ksettings in txgbe.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230214091527.69943-1-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MSG_ZEROCOPY ensures that pinned user pages do not exceed the limit.
If no limit is set, skip this accounting as otherwise expensive
atomic_long operations are called for no reason.
This accounting is already skipped for privileged (CAP_IPC_LOCK)
users. Rely on the same mechanism: if no mmp->user is set,
mm_unaccount_pinned_pages does not decrement either.
Tested by running tools/testing/selftests/net/msg_zerocopy.sh with
an unprivileged user for the TXMODE binary:
ip netns exec "${NS1}" sudo -u "{$USER}" "${BIN}" "-${IP}" ...
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230214155740.3448763-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
