IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Since 'symbol_duration' of 'struct wpan_phy' is in nanoseconds but
'lifs_period' and 'sifs_period' are both in microseconds, fix time
calculation in 'ieee802154_configure_durations()' and use convenient
'NSEC_PER_USEC' in 'ieee802154_setup_wpan_phy_pib()' as well.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 781830c800dd ("net: mac802154: Set durations automatically")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Message-ID: <20240508114010.219527-1-dmantipov@yandex.ru>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Commit 1a7d0890dd4a ("kprobe/ftrace: bail out if ftrace was killed")
introduced a bad K&R function definition, which we haven't accepted in a
long long time.
Gcc seems to let it slide, but clang notices with the appropriate error:
kernel/kprobes.c:1140:24: error: a function declaration without a prototype is deprecated in all >
1140 | void kprobe_ftrace_kill()
| ^
| void
but this commit was apparently never in linux-next before it was sent
upstream, so it didn't get the appropriate build test coverage.
Fixes: 1a7d0890dd4a kprobe/ftrace: bail out if ftrace was killed
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
the rest is unremarkable.
Current release - regressions:
- virtio_net: fix missed error path rtnl_unlock after control queue
locking rework
Current release - new code bugs:
- bpf: fix KASAN slab-out-of-bounds in percpu_array_map_gen_lookup,
caused by missing nested map handling
- drv: dsa: correct initialization order for KSZ88x3 ports
Previous releases - regressions:
- af_packet: do not call packet_read_pending() from tpacket_destruct_skb()
fix performance regression
- ipv6: fix route deleting failure when metric equals 0, don't assume
0 means not set / default in this case
Previous releases - always broken:
- bridge: couple of syzbot-driven fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=7eys
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:
- virtio_net: fix missed error path rtnl_unlock after control queue
locking rework
Current release - new code bugs:
- bpf: fix KASAN slab-out-of-bounds in percpu_array_map_gen_lookup,
caused by missing nested map handling
- drv: dsa: correct initialization order for KSZ88x3 ports
Previous releases - regressions:
- af_packet: do not call packet_read_pending() from
tpacket_destruct_skb() fix performance regression
- ipv6: fix route deleting failure when metric equals 0, don't assume
0 means not set / default in this case
Previous releases - always broken:
- bridge: couple of syzbot-driven fixes"
* tag 'net-6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits)
selftests: net: local_termination: annotate the expected failures
net: dsa: microchip: Correct initialization order for KSZ88x3 ports
MAINTAINERS: net: Update reviewers for TI's Ethernet drivers
dt-bindings: net: ti: Update maintainers list
l2tp: fix ICMP error handling for UDP-encap sockets
net: txgbe: fix to control VLAN strip
net: wangxun: match VLAN CTAG and STAG features
net: wangxun: fix to change Rx features
af_packet: do not call packet_read_pending() from tpacket_destruct_skb()
virtio_net: Fix missed rtnl_unlock
netrom: fix possible dead-lock in nr_rt_ioctl()
idpf: don't skip over ethtool tcp-data-split setting
dt-bindings: net: qcom: ethernet: Allow dma-coherent
bonding: fix oops during rmmod
net/ipv6: Fix route deleting failure when metric equals 0
selftests/net: reduce xfrm_policy test time
selftests/bpf: Adjust btf_dump test to reflect recent change in file_operations
selftests/bpf: Adjust test_access_variable_array after a kernel function name change
selftests/net/lib: no need to record ns name if it already exist
net: qrtr: ns: Fix module refcnt
...
- Improves the output of timerlat top by adding a missing \n,
and by avoiding printing color-formatting characters where
they are translated to regular characters.
- Improves timerlat auto-analysis output by replacing '\t'
with spaces to avoid copy-and-paste issues when reporting
problems.
- For timerlat, make the user-space (-u) option the default,
as it is the most complete test. Add a -k option to use
the in-kernel workload.
- On timerlat top and hist, add a summary with the overall
results. For instance, the minimum value for all CPUs,
the overall average and the maximum value from all CPUs.
- timerlat hist was printing initial values (i.e., 0 as max,
and ~0 as min) if the trace stopped before the first Ret-User
event. This problem was fixed by printing the " - "
no value string to the output if that was the case.
For all RTLA tools:
- Add a --warm-up <seconds> option, allowing the workload to
run for <seconds> before starting to collect results.
- Add a --trace-buffer-size option, allowing the user to set
the tracing buffer size for -t option. This option is mainly
useful for reducing the trace file. Now rtla depends on
libtracefs >= 1.6.
- Fix the -t [trace_file] parsing, now it does not require
the '=' before the option parameter, and better handles the
multiple ways a user can pass the trace_file.txt
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZkeciRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qs71AQC48M82m9LPGVt1gg8f3NoChIuo4908
fr+SXq2+Va+18gEAoYJ5G0JuAb7FkHtvpPGB5yQYArTSYJ5LiHrjSXNG1w8=
=ZrJJ
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tool updates from Steven Rostedt:
"Specific for timerlat:
- Improve the output of timerlat top by adding a missing \n, and by
avoiding printing color-formatting characters where they are
translated to regular characters.
- Improve timerlat auto-analysis output by replacing '\t' with spaces
to avoid copy-and-paste issues when reporting problems.
- Make the user-space (-u) option the default, as it is the most
complete test. Add a -k option to use the in-kernel workload.
- On timerlat top and hist, add a summary with the overall results.
For instance, the minimum value for all CPUs, the overall average
and the maximum value from all CPUs.
- timerlat hist was printing initial values (i.e., 0 as max, and ~0
as min) if the trace stopped before the first Ret-User event. This
problem was fixed by printing the " - " no value string to the
output if that was the case.
For all RTLA tools:
- Add a --warm-up <seconds> option, allowing the workload to run for
<seconds> before starting to collect results.
- Add a --trace-buffer-size option, allowing the user to set the
tracing buffer size for -t option. This option is mainly useful for
reducing the trace file. Now rtla depends on libtracefs >= 1.6.
- Fix the -t [trace_file] parsing, now it does not require the '='
before the option parameter, and better handles the multiple ways a
user can pass the trace_file.txt"
* tag 'trace-tools-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla: Documentation: Fix -t, --trace
rtla: Fix -t\--trace[=file]
rtla/timerlat: Fix histogram report when a cpu count is 0
rtla: Add --trace-buffer-size option
rtla/timerlat: Make user-space threads the default
rtla: Add the --warm-up option
rtla/timerlat: Add a summary for hist mode
rtla/timerlat: Add a summary for top mode
rtla/timerlat: Use pretty formatting only on interactive tty
rtla/auto-analysis: Replace \t with spaces
rtla/timerlat: Simplify "no value" printing on top
- Minor update to the user_events interface
The ABI of creating a user event states that the fields
are separated by semicolons, and spaces should be ignored.
But the parsing expected at least one space to be there (which was incorrect).
Fix the reading of the string to handle fields separated by
semicolons but no space between them.
This does extend the API sightly as now "field;field" will now be
parsed and not cause an error. But it should not cause any regressions
as no logic should expect it to fail.
Note, that the logic that parses the event fields to create the
trace_event works with no spaces after the semi-colon. It is
the logic that tests against existing events that is inconsistent.
This causes registering an event without using spaces to succeed
if it doesn't exist, but makes the same call that tries to register
to the same event, but doesn't use spaces, fail.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZkZN1hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qvCXAQDO8b2GeCuAMa2SW7PMFdpB2Tc2F5v4
WPBEKaLb0TU+7AEAwR0rCm22p9rpke754lcpZDz7xJNcyiyMkyXeJWCauQA=
=PYwP
-----END PGP SIGNATURE-----
Merge tag 'trace-user-events-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing user-event updates from Steven Rostedt:
- Minor update to the user_events interface
The ABI of creating a user event states that the fields are separated
by semicolons, and spaces should be ignored.
But the parsing expected at least one space to be there (which was
incorrect). Fix the reading of the string to handle fields separated
by semicolons but no space between them.
This does extend the API sightly as now "field;field" will now be
parsed and not cause an error. But it should not cause any regressions
as no logic should expect it to fail.
Note, that the logic that parses the event fields to create the
trace_event works with no spaces after the semi-colon. It is
the logic that tests against existing events that is inconsistent.
This causes registering an event without using spaces to succeed
if it doesn't exist, but makes the same call that tries to register
to the same event, but doesn't use spaces, fail.
* tag 'trace-user-events-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/user_events: Add non-spacing separator check
tracing/user_events: Fix non-spaced field matching
- Add ring_buffer memory mappings
The tracing ring buffer was created based on being mostly used with the
splice system call. It is broken up into page ordered sub-buffers and the
reader swaps a new sub-buffer with an existing sub-buffer that's part
of the write buffer. It then has total access to the swapped out
sub-buffer and can do copyless movements of the memory into other mediums
(file system, network, etc).
The buffer is great for passing around the ring buffer contents in the
kernel, but is not so good for when the consumer is the user space task
itself.
A new interface is added that allows user space to memory map the ring
buffer. It will get all the write sub-buffers as well as reader sub-buffer
(that is not written to). It can send an ioctl to change which sub-buffer
is the new reader sub-buffer.
The ring buffer is read only to user space. It only needs to call the
ioctl when it is finished with a sub-buffer and needs a new sub-buffer
that the writer will not write over.
A self test program was also created for testing and can be used as
an example for the interface to user space. The libtracefs (external
to the kernel) also has code that interacts with this, although it is
disabled until the interface is in a official release. It can be enabled
by compiling the library with a special flag. This was used for testing
applications that perform better with the buffer being mapped.
Memory mapped buffers have limitations. The main one is that it can not be
used with the snapshot logic. If the buffer is mapped, snapshots will be
disabled. If any logic is set to trigger snapshots on a buffer, that
buffer will not be allowed to be mapped.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZkYzDRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qttNAQCj3I0OpeI1vms85ShIa7Eha2qes5uC
Yml2fnapkmRSwAEAp5UTGxtDctycWOk9B9PA7/oJmLgATaQwRKoEeTUwfAA=
=TyEB
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing ring buffer updates from Steven Rostedt:
"Add ring_buffer memory mappings.
The tracing ring buffer was created based on being mostly used with
the splice system call. It is broken up into page ordered sub-buffers
and the reader swaps a new sub-buffer with an existing sub-buffer
that's part of the write buffer. It then has total access to the
swapped out sub-buffer and can do copyless movements of the memory
into other mediums (file system, network, etc).
The buffer is great for passing around the ring buffer contents in the
kernel, but is not so good for when the consumer is the user space
task itself.
A new interface is added that allows user space to memory map the ring
buffer. It will get all the write sub-buffers as well as reader
sub-buffer (that is not written to). It can send an ioctl to change
which sub-buffer is the new reader sub-buffer.
The ring buffer is read only to user space. It only needs to call the
ioctl when it is finished with a sub-buffer and needs a new sub-buffer
that the writer will not write over.
A self test program was also created for testing and can be used as an
example for the interface to user space. The libtracefs (external to
the kernel) also has code that interacts with this, although it is
disabled until the interface is in a official release. It can be
enabled by compiling the library with a special flag. This was used
for testing applications that perform better with the buffer being
mapped.
Memory mapped buffers have limitations. The main one is that it can
not be used with the snapshot logic. If the buffer is mapped,
snapshots will be disabled. If any logic is set to trigger snapshots
on a buffer, that buffer will not be allowed to be mapped"
* tag 'trace-ringbuffer-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Add cast to unsigned long addr passed to virt_to_page()
ring-buffer: Have mmapped ring buffer keep track of missed events
ring-buffer/selftest: Add ring-buffer mapping test
Documentation: tracing: Add ring-buffer mapping
tracing: Allow user-space mapping of the ring-buffer
ring-buffer: Introducing ring-buffer mapping functions
ring-buffer: Allocate sub-buffers with __GFP_COMP
- Removed unused ftrace_direct_funcs variables
- Fix a possible NULL pointer dereference race in eventfs
- Update do_div() usage in trace event benchmark test
- Speedup direct function registration with asynchronous RCU callback.
The synchronization was done in the registration code and this
caused delays when registering direct callbacks. Move the freeing
to a call_rcu() that will prevent delaying of the registering.
- Replace simple_strtoul() usage with kstrtoul()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZkYrphQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnNbAP0TCG5dLbHlcUtXFCG3AdOufOteyJZ4
efbRjFq0QY/RvQD7Bh1BNLSBsG0ptKPC7ch377A55xsgxZTr0mEarVTOQwg=
=GKXv
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Remove unused ftrace_direct_funcs variables
- Fix a possible NULL pointer dereference race in eventfs
- Update do_div() usage in trace event benchmark test
- Speedup direct function registration with asynchronous RCU callback.
The synchronization was done in the registration code and this caused
delays when registering direct callbacks. Move the freeing to a
call_rcu() that will prevent delaying of the registering.
- Replace simple_strtoul() usage with kstrtoul()
* tag 'trace-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Fix a possible null pointer dereference in eventfs_find_events()
ftrace: Fix possible use-after-free issue in ftrace_location()
ftrace: Remove unused global 'ftrace_direct_func_count'
ftrace: Remove unused list 'ftrace_direct_funcs'
tracing: Improve benchmark test performance by using do_div()
ftrace: Use asynchronous grace period for register_ftrace_direct()
ftrace: Replaces simple_strtoul in ftrace
- tracing/probes: Adding new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'.
- uprobes: Some performance optimizations have been done.
. Speed up the BPF uprobe event by delaying the fetching of the uprobe
event arguments that are not used in BPF.
. Avoid locking by speculatively checking whether uprobe event is valid.
. Reduce lock contention by using read/write_lock instead of spinlock for
uprobe list operation. This improved BPF uprobe benchmark result 43% on
average.
- rethook: Removes non-fatal warning messages when tracing stack from BPF
and skip rcu_is_watching() validation in rethook if possible.
- objpool: Optimizing objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching nr_cpu_ids
because it is a const value.
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmZFUxsbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b+fIH/A96/SeC5WRLhXmHfTCM
IvKUea2n0b0oV/2pVfHqfkCBTICuUZ97Opd9VH9jLtjBOTh0fUOGZ2DNVGdSYfWm
IIkS5dhuZxHXrSHEVYykwLHI3AOL7Q6Ny9EmOg1CNMidUkPMNtBvppsBYPlFU/B/
qQJAvOdkVOnNITCaas0+MNgepoVVKdJzdNQ1I4WrGyG8isCZBaCYKo2QcGyheCNN
y8NXvnVHgmgHQ8nTaeE5AawclFzFnhwHfPQPe1kiyGrx15b8K+VYmaZxPKv33A1a
KT3TKJ1Ep7s7iWFh2iPVJzIwOXCmSnvNTKfNx/MDuKtO7UVfFwytoMEaekbmv3bG
VqM=
=n/mW
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- tracing/probes: Add new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'
- uprobes performance optimizations:
- Speed up the BPF uprobe event by delaying the fetching of the
uprobe event arguments that are not used in BPF
- Avoid locking by speculatively checking whether uprobe event is
valid
- Reduce lock contention by using read/write_lock instead of
spinlock for uprobe list operation. This improved BPF uprobe
benchmark result 43% on average
- rethook: Remove non-fatal warning messages when tracing stack from
BPF and skip rcu_is_watching() validation in rethook if possible
- objpool: Optimize objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching
nr_cpu_ids because it is a const value
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace
* tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobe/ftrace: bail out if ftrace was killed
selftests/ftrace: Fix required features for VFS type test case
objpool: cache nr_possible_cpus() and avoid caching nr_cpu_ids
objpool: enable inlining objpool_push() and objpool_pop() operations
rethook: honor CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING in rethook_try_get()
ftrace: make extra rcu_is_watching() validation check optional
uprobes: reduce contention on uprobes_tree access
rethook: Remove warning messages printed for finding return address of a frame.
fprobe: Add entry/exit callbacks types
selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"
selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD"
Documentation: tracing: add new type '%pd' and '%pD' for kprobe
tracing/probes: support '%pD' type for print struct file's name
tracing/probes: support '%pd' type for print struct dentry's name
uprobes: add speculative lockless system-wide uprobe filter check
uprobes: prepare uprobe args buffer lazily
uprobes: encapsulate preparation of uprobe args buffer
- Do not put unneeded quotes on the extra command line items which was
inserted from the bootconfig.
- Remove redundant spaces from the extra command line.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmZGkuobHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bVEsH/iMoyjutOElICR0gapcR
i2fd+iDlIzTgHhVSGt8qkQAdclNt/9P2xSfnvk9Z2SImZBlx6oGwVi32fRxky7R2
vZ+vPX1WDMwxHbZl+CCwGhJJQ6n5d1u0rtgY2g4h18Er1vMK8Vo+1T3SCkEOqtxs
J4vfeYo9EOgdx2BA/De5GwpNrowrmdPn0TqSmjZlB7BqY8UY4a4x3Y2CeS8n5n2C
hnfkQ0kwbvNtsOEmRKeF9OROpBVVmlTExi8KzaH7shhCHbhIZD9froo2ZwSaCS8L
79+mDkyt3YcQKarVNKnH7wa0WvCEZYgVH+oZ6uUDhsP1m+L+d3BdNbDEEUPUpnjB
VnY=
=e4Ys
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
- Do not put unneeded quotes on the extra command line items which was
inserted from the bootconfig.
- Remove redundant spaces from the extra command line.
* tag 'bootconfig-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
init/main.c: Minor cleanup for the setup_command_line() function
init/main.c: Remove redundant space from saved_command_line
bootconfig: do not put quotes on cmdline items unless necessary
Summary
* Removed sentinel elements from ctl_table structs in kernel/*
Removing sentinels in ctl_table arrays reduces the build time size and
runtime memory consumed by ~64 bytes per array. Removals for net/, io_uring/,
mm/, ipc/ and security/ are set to go into mainline through their respective
subsystems making the next release the most likely place where the final
series that removes the check for proc_name == NULL will land. This PR adds
to removals already in arch/, drivers/ and fs/.
* Adjusted ctl_table definitions and references to allow constification
Adjustments:
- Removing unused ctl_table function arguments
- Moving non-const elements from ctl_table to ctl_table_header
- Making ctl_table pointers const in ctl_table_root structure
Making the static ctl_table structs const will increase safety by keeping the
pointers to proc_handler functions in .rodata. Though no ctl_tables where
made const in this PR, the ground work for making that possible has started
with these changes sent by Thomas Weißschuh.
Testing
* These changes went into linux-next after v6.9-rc4; giving it a good month of
testing.
-----BEGIN PGP SIGNATURE-----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=/rQW
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Remove sentinel elements from ctl_table structs in kernel/*
Removing sentinels in ctl_table arrays reduces the build time size
and runtime memory consumed by ~64 bytes per array. Removals for
net/, io_uring/, mm/, ipc/ and security/ are set to go into mainline
through their respective subsystems making the next release the most
likely place where the final series that removes the check for
proc_name == NULL will land.
This adds to removals already in arch/, drivers/ and fs/.
- Adjust ctl_table definitions and references to allow constification
- Remove unused ctl_table function arguments
- Move non-const elements from ctl_table to ctl_table_header
- Make ctl_table pointers const in ctl_table_root structure
Making the static ctl_table structs const will increase safety by
keeping the pointers to proc_handler functions in .rodata. Though no
ctl_tables where made const in this PR, the ground work for making
that possible has started with these changes sent by Thomas
Weißschuh.
* tag 'sysctl-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: drop now unnecessary out-of-bounds check
sysctl: move sysctl type to ctl_table_header
sysctl: drop sysctl_is_perm_empty_ctl_table
sysctl: treewide: constify argument ctl_table_root::permissions(table)
sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table)
bpf: Remove the now superfluous sentinel elements from ctl_table array
delayacct: Remove the now superfluous sentinel elements from ctl_table array
kprobes: Remove the now superfluous sentinel elements from ctl_table array
printk: Remove the now superfluous sentinel elements from ctl_table array
scheduler: Remove the now superfluous sentinel elements from ctl_table array
seccomp: Remove the now superfluous sentinel elements from ctl_table array
timekeeping: Remove the now superfluous sentinel elements from ctl_table array
ftrace: Remove the now superfluous sentinel elements from ctl_table array
umh: Remove the now superfluous sentinel elements from ctl_table array
kernel misc: Remove the now superfluous sentinel elements from ctl_table array
DT Bindings:
- Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings to
schemas
- Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0 irqc,
Renesas R-Car V4M TMU and CMT timers, Freescale S32G3 linflexuart, and
Mediatek MT7988 XHCI
- Add 'reg' constraints on DSI and SPI display panels
- More dropping of unnecessary quotes in schemas
- Use full paths rather than relative paths in schema $refs
- Drop redundant storing of phandle for reserved memory
DT Core:
- Use scope based cleanups for kfree() and of_node_put()
- Track interrupt-map and power-supplies for fw_devlink
- Add buffer overflow check in of_modalias()
- Add and use __of_prop_free() helper for freeing struct property
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmZGQGQACgkQ+vtdtY28
YcNUcg/7BqmWMNSPCqExiR/Vj9jGjpbZlXH5I8w2vvSpcDbeWgAAXxSLnPJvdM3n
tqDFec+4ieHAqerd0T3DAjauK1EIsC/+DiBO1JIgb6yhLkTcr+X5MYH7U5/WmQe/
+3baDokNXhqWQnas8YMNFzJqTJNFkUijS2QgwiL4Ypz2e64mctPjoSQKOtkQA8iZ
jfh/r2w0wIeous00Kf07REC6oL5Svzrx2Cg9geiFVIk9Puyk6esr/H1a4jyLbAvc
F3znSY21x5vqMGX3F0z8Mp5/aYpuvGkrXkzbOv8+OEP0ipJCwHA0BuK7pYe6narj
Ys0SygCrEC2VoWv2PypEN7xSj4/9TVt5gIWK9Lxf/fJLeuTVDr+9qhv4WvuYyDdG
kI09PlkG5bovpLAZi/YqulcRGEOPuJIQ+GST9Rf+0fFuAeCbxQmhq7BWmaSedUm2
lt0F5NofGTuTXAEMrwlu7FrfPZrVXLFczpsvG8dunR1iGYJm5QvIaJoqnFoQjUa6
1Vi4cK7VNRGhOYx/3uBzF8lB+CN5MqKyMUCc4hcR4f4Ut4/uPg4HjgxJUWo9aY76
VyryxNEV0K9idUMmW+dGEtbmXWc8ukbz2OOAPlKYobbmIOQpQZcMIizq7ilanZmZ
DNRhcqvoAwb7+zGaJ1DWFy/14/09JNBuC+mZUNjvxzb3fhcvjqE=
=tslW
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings
to schemas
- Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0
irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3
linflexuart, and Mediatek MT7988 XHCI
- Add 'reg' constraints on DSI and SPI display panels
- More dropping of unnecessary quotes in schemas
- Use full paths rather than relative paths in schema $refs
- Drop redundant storing of phandle for reserved memory
DT Core:
- Use scope based cleanups for kfree() and of_node_put()
- Track interrupt-map and power-supplies for fw_devlink
- Add buffer overflow check in of_modalias()
- Add and use __of_prop_free() helper for freeing struct property"
* tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
of: property: Add fw_devlink support for interrupt-map property
dt-bindings: display: panel: constrain 'reg' in DSI panels
dt-bindings: display: panel: constrain 'reg' in SPI panels
dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref
dt-bindings: Use full path to other schemas
dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema
of: module: add buffer overflow check in of_modalias()
dt-bindings: PCI: microchip: increase number of items in ranges property
dt-bindings: Drop unnecessary quotes on keys
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes
of: property: Use scope based cleanup on port_node
of: reserved_mem: Remove the use of phandle from the reserved_mem APIs
of: property: fw_devlink: Add support for "power-supplies" binding
dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support
dt-bindings: timer: renesas,tmu: Add R-Car V4M support
dt-bindings: timer: renesas,cmt: Add R-Car V4M support
of: Use scope based of_node_put() cleanups
of: Use scope based kfree() cleanups
...
Vladimir said when adding this test:
The bridge driver fares particularly badly [...] mainly because
it does not implement IFF_UNICAST_FLT.
See commit 90b9566aa5cd ("selftests: forwarding: add a test for
local_termination.sh").
We don't want to hide the known gaps, but having a test which
always fails prevents us from catching regressions. Report
the cases we know may fail as XFAIL.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240516152513.1115270-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adjust the initialization sequence of KSZ88x3 switches to enable
802.1p priority control on Port 2 before configuring Port 1. This
change ensures the apptrust functionality on Port 1 operates
correctly, as it depends on the priority settings of Port 2. The
prior initialization sequence incorrectly configured Port 1 first,
which could lead to functional discrepancies.
Fixes: a1ea57710c9d ("net: dsa: microchip: dcb: add special handling for KSZ88X3 family")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20240517050121.2174412-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove myself as reviewer for TI's ethernet drivers
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240516082545.6412-1-r-gunasekaran@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the list with the current maintainers of TI's CPSW ethernet
peripheral.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240516054932.27597-1-r-gunasekaran@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit a36e185e8c85
("udp: Handle ICMP errors for tunnels with same destination port on both endpoints")
UDP's handling of ICMP errors has allowed for UDP-encap tunnels to
determine socket associations in scenarios where the UDP hash lookup
could not.
Subsequently, commit d26796ae58940
("udp: check udp sock encap_type in __udp_lib_err")
subtly tweaked the approach such that UDP ICMP error handling would be
skipped for any UDP socket which has encapsulation enabled.
In the case of L2TP tunnel sockets using UDP-encap, this latter
modification effectively broke ICMP error reporting for the L2TP
control plane.
To a degree this isn't catastrophic inasmuch as the L2TP control
protocol defines a reliable transport on top of the underlying packet
switching network which will eventually detect errors and time out.
However, paying attention to the ICMP error reporting allows for more
timely detection of errors in L2TP userspace, and aids in debugging
connectivity issues.
Reinstate ICMP error handling for UDP encap L2TP tunnels:
* implement struct udp_tunnel_sock_cfg .encap_err_rcv in order to allow
the L2TP code to handle ICMP errors;
* only implement error-handling for tunnels which have a managed
socket: unmanaged tunnels using a kernel socket have no userspace to
report errors back to;
* flag the error on the socket, which allows for userspace to get an
error such as -ECONNREFUSED back from sendmsg/recvmsg;
* pass the error into ip[v6]_icmp_error() which allows for userspace to
get extended error information via. MSG_ERRQUEUE.
Fixes: d26796ae5894 ("udp: check udp sock encap_type in __udp_lib_err")
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Link: https://lore.kernel.org/r/20240513172248.623261-1-tparkin@katalix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings via
prctl, notably NPHIE which controls hashst/hashchk for ROP protection.
- Install powerpc selftests in sub-directories. Note this changes the way
run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove events.
- Other small features, cleanups and fixes.
Thanks to: Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann,
Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe Jaillet, Christophe
Leroy, Colin Ian King, Cédric Le Goater, Dr. David Alan Gilbert, Erhard Furtner,
Frank Li, GUO Zihua, Ganesh Goudar, Geoff Levand, Ghanshyam Agrawal, Greg Kurz,
Hari Bathini, Joel Stanley, Justin Stitt, Kunwu Chan, Li Yang, Lidong Zhong,
Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Matthias Schiffer,
Naresh Kamboju, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas
Miehlbradt, Ran Wang, Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta,
Shrikanth Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, Zhao Chenhui.
-----BEGIN PGP SIGNATURE-----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=GoCV
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.
- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove
events.
- Other small features, cleanups and fixes.
Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.
* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...
- Updates to AMBA bus subsystem to drop .owner struct device_driver
initialisations, moving that to code instead.
- Add LPAE privileged-access-never support
- Add support for Clang CFI
- clkdev: report over-sized device or connection strings
-----BEGIN PGP SIGNATURE-----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=t/xl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- Updates to AMBA bus subsystem to drop .owner struct device_driver
initialisations, moving that to code instead.
- Add LPAE privileged-access-never support
- Add support for Clang CFI
- clkdev: report over-sized device or connection strings
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: (36 commits)
ARM: 9398/1: Fix userspace enter on LPAE with CC_OPTIMIZE_FOR_SIZE=y
clkdev: report over-sized strings when creating clkdev entries
ARM: 9393/1: mm: Use conditionals for CFI branches
ARM: 9392/2: Support CLANG CFI
ARM: 9391/2: hw_breakpoint: Handle CFI breakpoints
ARM: 9390/2: lib: Annotate loop delay instructions for CFI
ARM: 9389/2: mm: Define prototypes for all per-processor calls
ARM: 9388/2: mm: Type-annotate all per-processor assembly routines
ARM: 9387/2: mm: Rewrite cacheflush vtables in CFI safe C
ARM: 9386/2: mm: Use symbol alias for cache functions
ARM: 9385/2: mm: Type-annotate all cache assembly routines
ARM: 9384/2: mm: Make tlbflush routines CFI safe
ARM: 9382/1: ftrace: Define ftrace_stub_graph
ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement
ARM: 9357/2: Reduce the number of #ifdef CONFIG_CPU_SW_DOMAIN_PAN
ARM: 9356/2: Move asm statements accessing TTBCR into C functions
ARM: 9355/2: Add TTBCR_* definitions to pgtable-3level-hwdef.h
ARM: 9379/1: coresight: tpda: drop owner assignment
ARM: 9378/1: coresight: etm4x: drop owner assignment
ARM: 9377/1: hwrng: nomadik: drop owner assignment
...
Jiawen Wu says:
====================
Wangxun fixes
Fixed some bugs when using ethtool to operate network devices.
v4 -> v5:
- Simplify if...else... to fix features.
v3 -> v4:
- Require both ctag and stag to be enabled or disabled.
v2 -> v3:
- Drop the first patch.
v1 -> v2:
- Factor out the same code.
- Remove statistics printing with more than 64 queues.
- Detail the commit logs to describe issues.
- Remove reset flag check in wx_update_stats().
- Change to set VLAN CTAG and STAG to be consistent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When VLAN tag strip is changed to enable or disable, the hardware requires
the Rx ring to be in a disabled state, otherwise the feature cannot be
changed.
Fixes: f3b03c655f67 ("net: wangxun: Implement vlan add and kill functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardware requires VLAN CTAG and STAG configuration always matches. And
whether VLAN CTAG or STAG changes, the configuration needs to be changed
as well.
Fixes: 6670f1ece2c8 ("net: txgbe: Add netdev features support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the issue where some Rx features cannot be changed.
When using ethtool -K to turn off rx offload, it returns error and
displays "Could not change any device features". And netdev->features
is not assigned a new value to actually configure the hardware.
Fixes: 6dbedcffcf54 ("net: libwx: Implement xx_set_features ops")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
trafgen performance considerably sank on hosts with many cores
after the blamed commit.
packet_read_pending() is very expensive, and calling it
in af_packet fast path defeats Daniel intent in commit
b013840810c2 ("packet: use percpu mmap tx frame pending refcount")
tpacket_destruct_skb() makes room for one packet, we can immediately
wakeup a producer, no need to completely drain the tx ring.
Fixes: 89ed5b519004 ("af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240515163358.4105915-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rtnl_lock would stay locked if allocating promisc_allmulti failed.
Also changed the allocation to GFP_KERNEL.
Fixes: ff7c7d9f5261 ("virtio_net: Remove command data from control_buf")
Reported-by: Eric Dumazet <edumaset@google.com>
Link: https://lore.kernel.org/netdev/CANn89iLazVaUCvhPm6RPJJ0owra_oFnx7Fhc8d60gV-65ad3WQ@mail.gmail.com/
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240515163125.569743-1-danielj@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Disabling tcp-data-split on idpf silently fails:
# ethtool -G $NETDEV tcp-data-split off
# ethtool -g $NETDEV | grep 'TCP data split'
TCP data split: on
But it works if you also change 'tx' or 'rx':
# ethtool -G $NETDEV tcp-data-split off tx 256
# ethtool -g $NETDEV | grep 'TCP data split'
TCP data split: off
The bug is in idpf_set_ringparam, where it takes a shortcut out if the
TX and RX sizes are not changing. Fix it by checking also if the
tcp-data-split setting remains unchanged. Only then can the soft reset
be skipped.
Fixes: 9b1aa3ef2328 ("idpf: add get/set for Ethtool's header split ringparam")
Reported-by: Xu Du <xudu@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-36182
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240515092414.158079-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"rmmod bonding" causes an oops ever since commit cc317ea3d927 ("bonding:
remove redundant NULL check in debugfs function"). Here are the relevant
functions being called:
bonding_exit()
bond_destroy_debugfs()
debugfs_remove_recursive(bonding_debug_root);
bonding_debug_root = NULL; <--------- SET TO NULL HERE
bond_netlink_fini()
rtnl_link_unregister()
__rtnl_link_unregister()
unregister_netdevice_many_notify()
bond_uninit()
bond_debug_unregister()
(commit removed check for bonding_debug_root == NULL)
debugfs_remove()
simple_recursive_removal()
down_write() -> OOPS
However, reverting the bad commit does not solve the problem completely
because the original code contains a race that could cause the same
oops, although it was much less likely to be triggered unintentionally:
CPU1
rmmod bonding
bonding_exit()
bond_destroy_debugfs()
debugfs_remove_recursive(bonding_debug_root);
CPU2
echo -bond0 > /sys/class/net/bonding_masters
bond_uninit()
bond_debug_unregister()
if (!bonding_debug_root)
CPU1
bonding_debug_root = NULL;
So do NOT revert the bad commit (since the removed checks were racy
anyway), and instead change the order of actions taken during module
removal. The same oops can also happen if there is an error during
module init, so apply the same fix there.
Fixes: cc317ea3d927 ("bonding: remove redundant NULL check in debugfs function")
Cc: stable@vger.kernel.org
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/641f914f-3216-4eeb-87dd-91b78aa97773@cybernetics.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Problem
=========
After commit 67f695134703 ("ipv6: Move setting default metric for routes"),
we noticed that the logic of assigning the default value of fc_metirc
changed in the ioctl process. That is, when users use ioctl(fd, SIOCADDRT,
rt) with a non-zero metric to add a route, then they may fail to delete a
route with passing in a metric value of 0 to the kernel by ioctl(fd,
SIOCDELRT, rt). But iproute can succeed in deleting it.
As a reference, when using iproute tools by netlink to delete routes with
a metric parameter equals 0, like the command as follows:
ip -6 route del fe80::/64 via fe81::5054:ff:fe11:3451 dev eth0 metric 0
the user can still succeed in deleting the route entry with the smallest
metric.
Root Reason
===========
After commit 67f695134703 ("ipv6: Move setting default metric for routes"),
When ioctl() pass in SIOCDELRT with a zero metric, rtmsg_to_fib6_config()
will set a defalut value (1024) to cfg->fc_metric in kernel, and in
ip6_route_del() and the line 4074 at net/ipv3/route.c, it will check by
if (cfg->fc_metric && cfg->fc_metric != rt->fib6_metric)
continue;
and the condition is true and skip the later procedure (deleting route)
because cfg->fc_metric != rt->fib6_metric. But before that commit,
cfg->fc_metric is still zero there, so the condition is false and it
will do the following procedure (deleting).
Solution
========
In order to keep a consistent behaviour across netlink() and ioctl(), we
should allow to delete a route with a metric value of 0. So we only do
the default setting of fc_metric in route adding.
CC: stable@vger.kernel.org # 5.4+
Fixes: 67f695134703 ("ipv6: Move setting default metric for routes")
Co-developed-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240514201102055dD2Ba45qKbLlUMxu_DTHP@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The check_random_order test add/get plenty of xfrm rules, which consume
a lot time on debug kernel and always TIMEOUT. Let's reduce the test
loop and see if it works.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240514095227.2597730-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZkadRwAKCRDbK58LschI
g7xHAP4qtAPmdwIkR5WIuqZtSEgk+a8ZZAvBvfEiGmjTH57x7QEAwvHBo0BkemuG
E8VjTgG12h93iI0VwNFY4k9MgBmWQQA=
=9BHu
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-05-17
We've added 7 non-merge commits during the last 2 day(s) which contain
a total of 8 files changed, 20 insertions(+), 9 deletions(-).
The main changes are:
1) Fix KASAN slab-out-of-bounds in percpu_array_map_gen_lookup and add
BPF selftests to cover this case, from Andrii Nakryiko.
(Report https://lore.kernel.org/bpf/20240514231155.1004295-1-kuba@kernel.org/)
2) Fix two BPF selftests to adjust for kernel changes after fast-forwarding
Linus' tree to make BPF CI all green again, from Martin KaFai Lau.
3) Fix libbpf feature detectors when using token_fd by adjusting the
attribute size for memset to cover the former, also from Andrii Nakryiko.
4) Fix the description of 'src' in ALU instructions for the BPF ISA
standardization doc, from Puranjay Mohan.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Adjust btf_dump test to reflect recent change in file_operations
selftests/bpf: Adjust test_access_variable_array after a kernel function name change
selftests/bpf: add more variations of map-in-map situations
bpf: save extended inner map info for percpu array maps as well
MAINTAINERS: Update ARM64 BPF JIT maintainer
bpf, docs: Fix the description of 'src' in ALU instructions
libbpf: fix feature detectors when using token_fd
====================
Link: https://lore.kernel.org/r/20240517001600.23703-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The btf_dump test fails:
test_btf_dump_struct_data:FAIL:file_operations unexpected file_operations: actual '(struct file_operations){
.owner = (struct module *)0xffffffffffffffff,
.fop_flags = (fop_flags_t)4294967295,
.llseek = (loff_t (*)(struct f' != expected '(struct file_operations){
.owner = (struct module *)0xffffffffffffffff,
.llseek = (loff_t (*)(struct file *, loff_t, int))0xffffffffffffffff,'
The "fop_flags" is a recent addition to the struct file_operations in
commit 210a03c9d51a ("fs: claw back a few FMODE_* bits")
This patch changes the test_btf_dump_struct_data() to reflect
this change.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20240516164310.2481460-1-martin.lau@linux.dev
After commit 4c3e509ea9f2 ("sched/balancing: Rename load_balance() => sched_balance_rq()"),
the load_balance kernel function is renamed to sched_balance_rq.
This patch adjusts the fentry program in test_access_variable_array.c
to reflect this kernel function name change.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240516170140.2689430-1-martin.lau@linux.dev
Highlights:
- New drivers/platform/arm64 directory for arm64 embedded-controller drivers
- New drivers for:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight support
- Miscellaneous cleanups / fixes / improvements
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: add platform_profile_cycle()
Add ACPI quickstart button (PNP0C32) driver:
- Add ACPI quickstart button (PNP0C32) driver
Add lenovo-yoga-tab2-pro-1380-fastcharger driver:
- Add lenovo-yoga-tab2-pro-1380-fastcharger driver
Add new Dell UART backlight driver:
- Add new Dell UART backlight driver
Add lenovo WMI camera button driver:
- Add lenovo WMI camera button driver
Add new MeeGoPad ANX7428 Type-C Cross Switch driver:
- Add new MeeGoPad ANX7428 Type-C Cross Switch driver
ISST:
- Support SST-BF and SST-TF per level
- Add missing MODULE_DESCRIPTION
- Add dev_fmt
- Use in_range() to check package ID validity
- Support partitioned systems
- Shorten the assignments for power_domain_info
- Use local variable for auxdev->dev
MAINTAINERS:
- drop Daniel Oliveira Nascimento
arm64:
- dts: qcom: acer-aspire1: Add embedded controller
asus-laptop:
- Use sysfs_emit() and sysfs_emit_at() to replace sprintf()
asus-wmi:
- cleanup main struct to avoid some holes
- Add support for MCU powersave
- ROG Ally increase wait time, allow MCU powersave
- adjust formatting of ppt-<name>() functions
- store a min default for ppt options
- support toggling POST sound
- add support variant of TUF RGB
- add support for Vivobook GPU MUX
- add support for 2024 ROG Mini-LED
- use sysfs_emit() instead of sprintf()
classmate-laptop:
- Add missing MODULE_DESCRIPTION()
devm-helpers:
- Fix a misspelled cancellation in the comments
dt-bindings:
- leds: Add LED_FUNCTION_FNLOCK
- platform: Add Acer Aspire 1 EC
hp-wmi:
- use sysfs_emit() instead of sprintf()
huawei-wmi:
- use sysfs_emit() instead of sprintf()
ideapad-laptop:
- switch platform profiles using thermal management key
- add FnLock LED class device
- add fn_lock_get/set functions
intel-vbtn:
- Log event code on unexpected button events
intel/pmc:
- Enable S0ix blocker show in Lunar Lake
- Add support to show S0ix blocker counter
- Update LNL signal status map
msi-laptop:
- Use sysfs_emit() to replace sprintf()
p2sb:
- Don't init until unassigned resources have been assigned
- Make p2sb_get_devfn() return void
platform:
- arm64: Add Acer Aspire 1 embedded controller driver
- Add ARM64 platform directory
platform/surface:
- aggregator: Log critical errors during SAM probing
- aggregator_registry: Add support for thermal sensors on the Surface Pro 9
- platform_profile: add fan profile switching
platform/x86/amd:
- pmc: Add new ACPI ID AMDI000B
- pmf: Add new ACPI ID AMDI0105
platform/x86/amd/hsmp:
- switch to use device_add_groups()
platform/x86/amd/pmc:
- Fix implicit declaration error on i386
- Add AMD MP2 STB functionality
platform/x86/fujitsu-laptop:
- Replace sprintf() with sysfs_emit()
platform/x86/intel-uncore-freq:
- Don't present root domain on error
platform/x86/intel/ifs:
- Disable irq during one load stage
- trace: display batch num in hex
- Classify error scenarios correctly
platform/x86/intel/pmc:
- Fix PCH names in comments
platform/x86/intel/sdsi:
- Add attribute to read the current meter state
- Add in-band BIOS lock support
- Combine read and write mailbox flows
- Set message size during writes
platform/x86/intel/tpmi:
- Add additional TPMI header fields
- Align comments in kernel-doc
- Check major version change for TPMI Information
- Handle error from tpmi_process_info()
quickstart:
- Fix race condition when reporting input event
- fix Kconfig selects
- Miscellaneous improvements
samsung-laptop:
- Use sysfs_emit() to replace the old interface sprintf()
think-lmi:
- Convert container_of() macros to static inline
thinkpad_acpi:
- Use false to set acpi_send_ev to false
- Support hotkey to disable trackpoint doubletap
- Support for system debug info hotkey
- Support for trackpoint doubletap
- Simplify known_ev handling
- Add mappings for adaptive kbd clipping-tool and cloud keys
- Switch to using sparse-keymap helpers
- Drop KEY_RESERVED special handling
- Use correct keycodes for volume and brightness keys
- Change hotkey_reserved_mask initialization
- Do not send ACPI netlink events for unknown hotkeys
- Move tpacpi_driver_event() call to tpacpi_input_send_key()
- Move hkey > scancode mapping to tpacpi_input_send_key()
- Drop tpacpi_input_send_key_masked() and hotkey_driver_event()
- Always call tpacpi_driver_event() for hotkeys
- Move hotkey_user_mask check to tpacpi_input_send_key()
- Move special original hotkeys handling out of switch-case
- Move adaptive kbd event handling to tpacpi_driver_event()
- Make tpacpi_driver_event() return if it handled the event
- Do hkey to scancode translation later
- Use tpacpi_input_send_key() in adaptive kbd code
- Drop ignore_acpi_ev
- Drop setting send_/ignore_acpi_ev defaults twice
- Provide hotkey_poll_stop_sync() dummy
- Take hotkey_mutex during hotkey_exit()
- change sprintf() to sysfs_emit()
- use platform_profile_cycle()
tools arch x86:
- Add dell-uart-backlight-emulator
tools/arch/x86/intel_sdsi:
- Add current meter support
- Simplify ascii printing
- Fix meter_certificate decoding
- Fix meter_show display
- Fix maximum meter bundle length
tools/power/x86/intel-speed-select:
- v1.19 release
- Display CPU as None for -1
- SST BF/TF support per level
- Increase number of CPUs displayed
- Present all TRL levels for turbo-freq
- Fix display for unsupported levels
- Support multiple dies
- Increase die count
toshiba_acpi:
- Add quirk for buttons on Z830
uv_sysfs:
- use sysfs_emit() instead of sprintf()
wmi:
- Add MSI WMI Platform driver
- Add driver development guide
- Mark simple WMI drivers as legacy-free
- Avoid returning AE_OK upon unknown error
- Support reading/writing 16 bit EC values
x86-android-tablets:
- Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
- Xiaomi pad2 RGB LED fwnode updates
- Pass struct device to init()
- Add Lenovo Yoga Tablet 2 Pro 1380F/L data
- Unregister devices in reverse order
- Add swnode for Xiaomi pad2 indicator LED
- Use GPIO_LOOKUP() macro
xiaomi-wmi:
- Drop unnecessary NULL checks
- Fix race condition when reporting key events
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmZF1kwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wSXwgAsaSH6Sawn5sHOj52lQY7gNI0uf3V
YfZFawRpreCrlwLPU2f7SX0mLW+hh+ekQ2C1NvaUUVqQwzONELh0DWSYJpzz/v1r
jD14EcY2dnTv+FVyvCj5jZsiYxo/ViTvthMduiO7rrJKN7aOej9iNn68P0lvcY8s
HDJ2lPFNGnY01snz3C1NyjyIWw8YsfwqXEqOmhrDyyoKLXpsDs8H/Jqq5yXfeLax
hSpjbGB85EGJPXna6Ux5TziPh/MYMtF1+8R4Fn0sGvfcZO6/H1fDne0uI9UwrKnN
d2g4VHXU2DIhTshUc14YT2AU27eQiZVN+J3VpuYIbC9cmlQ2F6bjN3uxoQ==
=UWbu
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
Simon Glass wanted to support binman's output properties in order to
check their validity using the binding checks and proposed changes with
the missing properties as well as a binman compatible.
Krzysztof Kozlowski on his side shared a new yaml for describing
Samsung's OneNAND interface.
The interface with NVMEM has also been slightly improved/fixed,
especially now that OTP are also supported in the NAND subsystem.
Along with these changes, small cleanups have also been contributed
around ID tables, structure sizes, arithmetic checks and comments.
* Raw NAND subsystem
Two small fixes, one in the Hynix vendor code for properly returning an
error which might have been ignored and another in the Davinci driver to
properly synchronize the controller with the gpio domain.
* SPI NOR subsystem
SPI NOR now uses div_u64() instead of div64_u64() in places where the
divisor is 32 bits. Many 32 bit architectures can optimize this variant
better than a full 64 bit divide.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmZFzEwACgkQJWrqGEe9
VoRNZwf/dTvWM2r/tLPkXJ4lDdZUMJO2Z5YebSwcUWTJ8P4yhoGfxDwgEiWaaauF
Z++MdSBEK3C9us19ro+YCFidq7T+m1PcekHLa1Zckcy2NOLFyRT7O5j16CEQKHlj
a/9WfZ37TIaWelZDXnm6nWyTxsDFp5h9IOsG32/SckBFm/TU0+G2MCKz7HvJ6DRg
/K6Yu+3KpxhO0D3PhTm5+Fi7UhBPABKfvBYrLFiYnuMi3d0L6/75wxj8dje7iW+Q
9WusrjKvhf3ffp9715RxjDQdMA1MIa/ok7tIlTQXyBfDM1xZkr6MDNeDJfd2FU7J
2hk/ga7A/zigKJ37ftw/34YZJK6xmw==
=AtHp
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- Simon Glass wanted to support binman's output properties in order
to check their validity using the binding checks and proposed
changes with the missing properties as well as a binman compatible.
- Krzysztof Kozlowski on his side shared a new yaml for describing
Samsung's OneNAND interface.
- The interface with NVMEM has also been slightly improved/fixed,
especially now that OTP are also supported in the NAND subsystem.
- Along with these changes, small cleanups have also been contributed
around ID tables, structure sizes, arithmetic checks and comments.
Raw NAND subsystem:
- Two small fixes, one in the Hynix vendor code for properly
returning an error which might have been ignored and another in the
Davinci driver to properly synchronize the controller with the gpio
domain.
SPI NOR subsystem:
- SPI NOR now uses div_u64() instead of div64_u64() in places where
the divisor is 32 bits. Many 32 bit architectures can optimize this
variant better than a full 64 bit divide"
* tag 'mtd/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: replace unnecessary div64_u64() with div_u64()
mtd: mchp23k256: drop unneeded MODULE_ALIAS
dt-bindings: mtd: fixed-partition: Add binman compatibles
dt-bindings: mtd: fixed-partitions: Add alignment properties
mtd: maps: sa1100-flash: Prefer struct_size over open coded arithmetic
mtd: core: Align comment with an action in mtd_otp_nvmem_add()
mtd: rawnand: hynix: fixed typo
mtd: rawnand: davinci: Add dummy read after sending command
mtd: partitions: redboot: Added conversion of operands to a larger type
dt-bindings: mtd: Add Samsung S5Pv210 OneNAND
mtd: core: Don't fail mtd_otp_nvmem_add() if OTP is unsupported
mtd: core: Report error if first mtd_otp_size() call fails in mtd_otp_nvmem_add()
- Increase the timeout period of the ACMD41 command
- Add card entry for quirks to debugfs
- Add mmc_gpiod_set_cd_config() function
- Store owner from SDIO modules with sdio_register_driver()
MMC host:
- atmel-mci: Some cleanups and a switch to use dev_err_probe()
- renesas_sdhi: Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
- renesas_sdhi: Set the SDBUF after reset
- sdhci: Add support for "Tuning Error" interrupts
- sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
- sdhci-acpi: Disable write protect detection on Toshiba WT10-A
- sdhci-acpi: Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
- sdhci_am654: Re-work and fix the tuning support for multiple speed-modes
- sdhci_am654: Add tuning algorithm for delay chain
- sdhci-esdhc-imx: Add NXP S32G3 support
- sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
- sdhci-of-dwcmshc: Implement SDHCI CQE support
- sdhci-pci-gli: Use the proper pci_set_power_state() instead of PMCSR writes
MEMSTICK:
- Convert a couple of drivers to use the ->remove_new() callback
-----BEGIN PGP SIGNATURE-----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=I2JP
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Increase the timeout period of the ACMD41 command
- Add card entry for quirks to debugfs
- Add mmc_gpiod_set_cd_config() function
- Store owner from SDIO modules with sdio_register_driver()
MMC host:
- atmel-mci: Some cleanups and a switch to use dev_err_probe()
- renesas_sdhi:
- Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
- Set the SDBUF after reset
- sdhci: Add support for "Tuning Error" interrupts
- sdhci-acpi:
- Add quirk to enable pull-up on the card-detect GPIO on Asus
T100TA
- Disable write protect detection on Toshiba WT10-A
- Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
- sdhci_am654:
- Re-work and fix the tuning support for multiple speed-modes
- Add tuning algorithm for delay chain
- sdhci-esdhc-imx: Add NXP S32G3 support
- sdhci-of-dwcmshc:
- Add tuning support for Sophgo CV1800B and SG200X
- Implement SDHCI CQE support
- sdhci-pci-gli: Use the proper pci_set_power_state() instead of
PMCSR writes"
MEMSTICK:
- Convert a couple of drivers to use the ->remove_new() callback"
* tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs
dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility
dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list
mmc: renesas_sdhi: Set the SDBUF after reset
mmc: core: Increase the timeout period of the ACMD41 command
mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too
mmc: atmel-mci: Switch to use dev_err_probe()
mmc: atmel-mci: Incapsulate used to be a platform data into host structure
mmc: atmel-mci: Replace platform device pointer by generic one
mmc: atmel-mci: Use temporary variable for struct device
mmc: atmel-mci: Get rid of platform data leftovers
mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning
mmc: sdhci-s3c: Choose sdhci_ops based on variant
mmc: sdhci_am654: Constify struct sdhci_ops
mmc: sdhci-sprd: Constify struct sdhci_ops
mmc: sdhci-omap: Constify struct sdhci_ops
mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops
mmc: slot-gpio: Use irq_handler_t type
mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
...
-----BEGIN PGP SIGNATURE-----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=JM5r
-----END PGP SIGNATURE-----
Merge tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New V4L2 ioctl VIDIOC_REMOVE_BUFS
- experimental support for using generic metaformats on V4L2 core
- New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x
- More cleanups at atomisp driver
- Usual bunch of driver cleanups, improvements and fixes
* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: bcm2835-unicam: Depend on COMMON_CLK
Revert "media: v4l2-ctrls: show all owned controls in log_status"
media: ov2740: Ensure proper reset sequence on probe()
media: intel/ipu6: Don't print user-triggerable errors to kernel log
media: bcm2835-unicam: Fix driver path in MAINTAINERS
media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
media: bcm2835-unicam: Do not print error when irq not found
media: bcm2835-unicam: Do not replace IRQ retcode during probe
media: bcm2835-unicam: Convert to platform remove callback returning void
media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
media: intel/ipu6: explicitly include vmalloc.h
media: cec.h: Fix kerneldoc
media: uvcvideo: Refactor iterators
media: v4l: async: refactor v4l2_async_create_ancillary_links
media: intel/ipu6: Don't re-allocate memory for firmware
media: dvb-frontends: tda10048: Fix integer overflow
media: tc358746: Use the correct div_ function
media: i2c: st-mipid02: Use the correct div function
media: tegra-vde: Refactor timeout handling
media: stk1160: Use min macro
...
buddy:
- fix breakage in buddy allocator.
-----BEGIN PGP SIGNATURE-----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=w/fd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-05-16' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fix from Dave Airlie:
- fix breakage in buddy allocator
* tag 'drm-next-2024-05-16' of https://gitlab.freedesktop.org/drm/kernel:
drm/tests: Add a unit test for range bias allocation
drm/buddy: Fix the range bias clear memory allocation issue
Move -t, --trace from common_options.rst to
common_osnoise_options.rst and
common_timerlat_options.rst
so that it will appear in the man pages
rtla-timerlat-hist.1
rtla-timerlat-top.1
rtla-osnoise-hist.1
rtla-osnoise-top.1
Remove the equals ('=') sign and add a space.
Link: https://lkml.kernel.org/r/20240516143121.12614-1-jkacur@redhat.com
Cc: Daniel Bristot de Oliveria <bristot@kernel.org>
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
The -t option has an optional argument.
The usual case is for a short option to be specified without an '='
and for the long version to be specified with an '='
Various forms of this do not work as expected.
For example:
rtla timerlat hist -T50 -tfile.txt
will result in a truncated file name of "ile.txt"
Another example is that the long form without the '=' will result in the
default file name instead of the requested file name.
This patch properly parses the optional argument with and without '='
and with and without spaces for the short form.
This patch was also tested using -t and --trace without providing a file
name both as the last requested option and with a following long and
short option.
For example:
rtla timerlat hist -T50 -t -u
rtla timerlat hist -T50 --trace -u
This fix is applied to both timerlat top and hist
and to osnoise top and hist.
Here is the full testing for rtla timerlat hist.
Before applying the patch
rtla timerlat hist -T50 -t=file.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 -tfile.txt
Truncated file name "ile.txt"
rtla timerlat hist -T50 -t file.txt
Default file name instead of file.txt
rtla timerlat hist -T50 --trace=file.txt
Truncated file name "ile.txt"
rtla timerlat hist -T50 --trace file.txt
Default file name "timerlat_trace.txt" instead of "file.txt"
After applying the patch:
rtla timerlat hist -T50 -t=file.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 -tfile.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 -t file.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 --trace=file.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 --trace file.txt
Works as expected, "file.txt"
In addition the following tests were performed to make sure that
the default file name worked as expected including with trailing
options.
rtla timerlat hist -T50 -t
Works as expected "timerlat_trace.txt"
rtla timerlat hist -T50 --trace
Works as expected "timerlat_trace.txt"
rtla timerlat hist -T50 -t -u
Works as expected "timerlat_trace.txt"
rtla timerlat hist -T50 --trace -u
Works as expected "timerlat_trace.txt"
Link: https://lkml.kernel.org/r/20240515183024.59985-1-jkacur@redhat.com
Cc: Daniel Bristot de Oliveria <bristot@kernel.org>
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
On short runs it is possible to get no samples on a cpu, like this:
# rtla timerlat hist -u -T50
Index IRQ-001 Thr-001 Usr-001 IRQ-002 Thr-002 Usr-002
2 1 0 0 0 0 0
33 0 1 0 0 0 0
36 0 0 1 0 0 0
49 0 0 0 1 0 0
52 0 0 0 0 1 0
over: 0 0 0 0 0 0
count: 1 1 1 1 1 0
min: 2 33 36 49 52 18446744073709551615
avg: 2 33 36 49 52 -
max: 2 33 36 49 52 0
rtla timerlat hit stop tracing
IRQ handler delay: (exit from idle) 48.21 us (91.09 %)
IRQ latency: 49.11 us
Timerlat IRQ duration: 2.17 us (4.09 %)
Blocking thread: 1.01 us (1.90 %)
swapper/2:0 1.01 us
------------------------------------------------------------------------
Thread latency: 52.93 us (100%)
Max timerlat IRQ latency from idle: 49.11 us in cpu 2
Note, the value 18446744073709551615 is the same as ~0.
Fix this by reporting no results for the min, avg and max if the count
is 0.
Link: https://lkml.kernel.org/r/20240510190318.44295-1-jkacur@redhat.com
Cc: stable@vger.kernel.org
Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode")
Suggested-by: Daniel Bristot de Oliveria <bristot@kernel.org>
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Add the option allow the users to set a different buffer size for the
trace. For example, in large systems, the user might be interested on
reducing the trace buffer to avoid large tracing files.
The buffer size is specified in kB, and it is only affecting
the tracing instance.
The function trace_set_buffer_size() appears on libtracefs v1.6,
so increase the minimum required version on Makefile.config.
Link: https://lkml.kernel.org/r/e7c9ca5b3865f28e131a49ec3b984fadf2d056c6.1715860611.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
With some compilers/configs fadump_setup_param_area() isn't inlined into
its caller (which is __init), leading to a section mismatch warning:
WARNING: modpost: vmlinux: section mismatch in reference:
fadump_setup_param_area+0x200 (section: .text.fadump_setup_param_area)
-> memblock_phys_alloc_range (section: .init.text)
Fix it by adding an __init annotation.
Fixes: 683eab94da75 ("powerpc/fadump: setup additional parameters for dump capture kernel")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240515163708.3380c4d1@canb.auug.org.au/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202405140922.oucLOx4Y-lkp@intel.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240516132631.347956-1-mpe@ellerman.id.au
Two small fixes, one in the Hynix vendor code for properly returning an
error which might have been ignored and another in the Davinci driver to
properly synchronize the controller with the gpio domain.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmZFyQMACgkQJWrqGEe9
VoQZEwf+Kxxz73leM+aY3qqKoDk5mqKg7N/rzdTGfBUmTpCm0LclmupmX26dwnmq
kDQic3PzCpZOms3epQXcnLZ7jvLCpPyLcjg5crhXN1inF/M8XEjvbbKFR2VfShcB
EiYJIJgcRmqxv1wnZKn1iyphKJmlR6OuxB6OpFV2lXgw6SF1Cl8JJtPMvyDQkHrU
4BFJNPpvX8Cyu9hNH7zt1iUqaUwq2YKw9xYCPsXGW4T+UsVWhNRnQHf4+LQire2D
hUW3q5Qa+JjbM4GDsFEJ10TPHBeCFV5co388CIBPDdfLIHrleyTiEFbEtUhdtYlo
wxKjqSufF/uR41DnDFI9LZaFNHN3uw==
=ifdO
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.10' into mtd/next
Raw NAND:
Two small fixes, one in the Hynix vendor code for properly returning an
error which might have been ignored and another in the Davinci driver to
properly synchronize the controller with the gpio domain.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
divisor is 32 bits. Many 32 bit architectures can optimize this variant
better than a full 64 bit divide.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQTlUWNzXGEo3bFmyIR4drqP028CQUCZjJfCBQccHJhdHl1c2hA
a2VybmVsLm9yZwAKCRAR4drqP028CV04AQC+9BYCbJi/gnydH9OWzDPVz7CcmkEv
SeJ7ixBhd61P5wD7BHrhACgb+In/R1p9pHkrG8SRwy6rf5BLoYRhxQP0/A0=
=GXM6
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-6.10' into mtd/next
SPI NOR now uses div_u64() instead of div64_u64() in places where the
divisor is 32 bits. Many 32 bit architectures can optimize this variant
better than a full 64 bit divide.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
There is no need to add the name to ns_list again if the netns already
recoreded.
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The qrtr protocol core logic and the qrtr nameservice are combined into
a single module. Neither the core logic or nameservice provide much
functionality by themselves; combining the two into a single module also
prevents any possible issues that may stem from client modules loading
inbetween qrtr and the ns.
Creating a socket takes two references to the module that owns the
socket protocol. Since the ns needs to create the control socket, this
creates a scenario where there are always two references to the qrtr
module. This prevents the execution of 'rmmod' for qrtr.
To resolve this, forcefully put the module refcount for the socket
opened by the nameservice.
Fixes: a365023a76f2 ("net: qrtr: combine nameservice into main module")
Reported-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Antipov
Linus Torvalds
Jakub Kicinski
Oleksij Rempel
Ravi Gunasekaran
Tom Parkin
David S. Miller
Jiawen Wu
Eric Dumazet
Daniel Jurgens
Michal Schmidt
Sagar Cheluvegowda
Tony Battersby
xu xin
Hangbin Liu
Martin KaFai Lau
John Kacur
Daniel Bristot de Oliveira
Michael Ellerman
Russell King (Oracle)
Miquel Raynal
Chris Lew