IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add support to set rx buf len via ethtool -G parameter and get
rx buf len via ethtool -g parameter.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tx copybreak buf size is used for tx copybreak feature, the feature is
used for small size packet or frag. It adds a queue based tx shared
bounce buffer to memcpy the small packet when the len of xmitted skb is
below tx_copybreak(value to distinguish small size and normal size),
and reduce the overhead of dma map and unmap when IOMMU is on.
Support setting it via ethtool --set-tunable parameter and getting
it via ethtool --get-tunable parameter.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ethtool to set/get tx copybreak buf size.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: More socket option support
These patches add MPTCP socket support for a few additional socket
options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT, IPV6_FREEBIND, and
IPV6_TRANSPARENT.
Patch 1 exposes __ip_sock_set_tos() for use in patch 2.
Patch 2 adds IP_TOS support.
Patches 3 and 4 add the freebind and transparent support, with a
selftest for the latter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
No hard dependencies here, just skip if test environ lacks
nft binary or the needed kernel config options.
The test case spawns listener in ns2 but ns1 will connect
to the ip address of ns4.
policy routing + tproxy rule will redirect packets to ns2 instead
of forward.
v3: - update mptcp/config (Mat Martineau)
- more verbose SKIP messages in mptcp_connect.sh
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These options also need to be set before bind, so do the sync of msk to
new ssk socket a bit earlier.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SOL_IP provides a way to configure network layer attributes in a
socket. This patch adds support for IP_TOS for setsockopt(.. ,SOL_IP, ..)
Support for SOL_IP is added in mptcp_setsockopt() and IP_TOS is handled in
a private function. The idea here is to take in the value passed for IP_TOS
and set it to the current subflow, open subflows as well new subflows that
might be created after the initial call to setsockopt(). This sync is done
using sync_socket_options(.., ssk) and setting the value of tos using
__ip_sock_set_tos(ssk,..).
The patch has been tested using the packetdrill script here -
https://github.com/multipath-tcp/mptcp_net-next/issues/220#issuecomment-947863717
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/220
Signed-off-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Making the static function __ip_sock_set_tos() from net/ipv4/ip_sockglue.c
accessible by declaring it in include/net/ip.h
The reason for doing this is to use this function to set IP_TOS value in
mptcp_setsockopt() without the lock.
Signed-off-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
net: constify netdev->dev_addr
Take care of a few stragglers and make netdev->dev_addr const.
netdev->dev_addr can be held on the address tree like any other
address now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since all netdev->dev_addr modifications go via dev_addr_mod()
we can put it on the list. When address is change remove it
and add it back.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
netdev->dev_addr should only be modified via helpers,
but someone may be casting off the const. Add a runtime
check to catch abuses.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no module callers in-tree and it's hard to justify
why anyone would init or flush addresses of a netdev (note
the flush is more of a destructor, it frees netdev->dev_addr).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. We converted all users to make modifications via appropriate
helpers, make netdev->dev_addr const.
The update helpers need to upcast from the buffer to
struct netdev_hw_addr.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x_vfpf_config_mac() was constified by not its stub.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the TI DP83561-SP Gigabit ethernet phy device.
The dp83561-sp is a radiation hardened space grade gigabit ethernet
PHY. It has been tested for single event latch upto 121 MeV, the
critical reliability parameter for space designs. It interfaces directly to
twisted pair media through an external transformer. And the device also
interfaces directly to the MAC layer through Reduced GMII (RGMII) and MII.
DP83867, DP83869 and DP83561-SP, all these parts support 1000Base-T/
100Base-TX/ and 10Base-Te standards and have similar register map for
the core functionality.
The data sheet for this part is at https://www.ti.com/product/DP83561-SP
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Geet Modi <geet.modi@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211118102532.9835-1-hnagalla@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
do_div() does a 64-by-32 division. Here the divisor is an
unsigned long which on some platforms is 64 bit wide. So use
div64_ul instead of do_div to avoid a possible truncation.
Eliminate the following coccicheck warning:
./drivers/net/ethernet/renesas/ravb_main.c:2492:1-7: WARNING:
do_div() does a 64-by-32 division, please consider using div64_ul
instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/1637228883-100100-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Removing reduplicated error handling when running into error path
of `nfp_compile_flow_metadata`.
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Add struct_group() to mark region of struct stats_reply_data that should
be initialized, which can now be done in a single memset() call.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Add struct_group() to mark the region of struct iucv_sock that gets
initialized to zero. Avoid the future warning:
In function 'fortify_memset_chk',
inlined from 'iucv_sock_alloc' at net/iucv/af_iucv.c:476:2:
./include/linux/fortify-string.h:199:4: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
199 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/lkml/19ff61a0-0cda-6000-ce56-dc6b367c00d6@linux.ibm.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_after() to clear everything after the dst_entry member of
struct rt6_info.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_startat() so memset() doesn't get confused about writing
beyond the destination member that is intended to be the starting point
of zeroing through the end of the struct.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_startat() so memset() doesn't get confused about writing
beyond the destination member that is intended to be the starting point
of zeroing through the end of the struct.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recently pci_read/write_vpd_any() have been added to the PCI VPD API.
These functions allow to access VPD address space outside the
auto-detected VPD, and they can be used to significantly simplify the
eeprom ethtool ops.
Tested with a 88E8070 card with 1KB EEPROM.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use 'for_each_clear_bit()' instead of hand writing it. It is much less
version.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() in struct nig_stats around members egress_mac_pkt0_lo,
egress_mac_pkt0_hi, egress_mac_pkt1_lo, and egress_mac_pkt1_hi (and the
respective members in struct bnx2x_eth_stats), so they can be referenced
together. This will allow memcpy() and sizeof() to more easily reason
about sizes, improve readability, and avoid future warnings about writing
beyond the end of struct bnx2x_eth_stats's rx_stat_ifhcinbadoctets_hi.
"pahole" shows no size nor member offset changes to either struct.
"objdump -d" shows no meaningful object code changes (i.e. only source
line number induced differences and optimizations).
Additionally adds BUILD_BUG_ON() to compare the separate struct group
sizes.
Reviewed-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Link: https://lore.kernel.org/lkml/DM5PR18MB2229B0413C372CC6E49D59A3B2C59@DM5PR18MB2229.namprd18.prod.outlook.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() in struct fw_eth_tx_pkt_vm_wr around members ethmacdst,
ethmacsrc, ethtype, and vlantci, so they can be referenced together. This
will allow memcpy() and sizeof() to more easily reason about sizes,
improve readability, and avoid future warnings about writing beyond the
end of ethmacdst.
"pahole" shows no size nor member offset changes to struct
fw_eth_tx_pkt_vm_wr. "objdump -d" shows no object code changes.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() in struct rss_hdr around members imm_data and intr_gen,
so they can be referenced together. This will allow memcpy() and sizeof()
to more easily reason about sizes, improve readability, and avoid future
warnings about writing beyond the end of imm_data.
"pahole" shows no size nor member offset changes to struct rss_hdr.
"objdump -d" shows no object code changes.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
1000base-KX was missed in phylink_caps_to_linkmodes(), add it. This
will be necessary to convert stmmac with xpcs to ensure we don't drop
any supported linkmodes.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karsten Graul says:
====================
s390/net: updates 2021-11-18
Please apply the following patches to netdev's net-next tree.
Heiko provided fixes for kernel doc comments and solved some
other compiler warnings.
Julians qeth patch simplifies the rx queue handling in the code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the compiler to recognize and check format strings and parameters.
As reported with allmodconfig and W=1:
drivers/s390/net/ctcm_dbug.c: In function ‘ctcm_dbf_longtext’:
drivers/s390/net/ctcm_dbug.c:73:9: error: function ‘ctcm_dbf_longtext’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
73 | vsnprintf(dbf_txt_buf, sizeof(dbf_txt_buf), fmt, args);
| ^~~~~~~~~
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The second parameter as specified by the format string is actually a
string not an integer.
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix kernel doc comments where appropriate or remove incorrect kernel
doc indicators.
Also move kernel doc comments directly before functions.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We always need an RX queue, and there's no reconfig situation either
where we would need to free & rebuild the queue.
So allocate the RX queue right from the start, and avoid freeing it
during unrelated qeth_free_qdio_queues() calls.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
net: use eth_hw_addr_set() in arch-specific drivers
Fixups for more arch-specific drivers.
With these (and another patch which didn't fit) the build is more or
less clean with all cross-compilers available on kernel.org. I say
more or less because around half of the arches fail to build for
unrelated reasons right now.
Most of the changes here are for m68k, 32bit x86 and alpha.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_addr is set from IO reads, passed to an arch-specific helper.
Note that the helper never reads it so uninitialized temp is fine.
Fixes build on parisc.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_addr is set from IO reads, and broken from a u16 value.
Fixes build on Alpha.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IO reads, so save to an array then eth_hw_addr_set().
Fixes build on x86 (32bit).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use temp to pass to the reading function, the function is generic
so can't fix there.
Fixes m68k build.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Loop with offsetting to every second byte, so use a temp buffer.
Fixes m68k build.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IO reads, so save to an array then eth_hw_addr_set().
Fixes build on Alpha.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
