IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There are multiple refcounting bugs related to multi-BSSID:
- In bss_ref_get(), if the BSS has a hidden_beacon_bss, then
the bss pointer is overwritten before checking for the
transmitted BSS, which is clearly wrong. Fix this by using
the bss_from_pub() macro.
- In cfg80211_bss_update() we copy the transmitted_bss pointer
from tmp into new, but then if we release new, we'll unref
it erroneously. We already set the pointer and ref it, but
need to NULL it since it was copied from the tmp data.
- In cfg80211_inform_single_bss_data(), if adding to the non-
transmitted list fails, we unlink the BSS and yet still we
return it, but this results in returning an entry without
a reference. We shouldn't return it anyway if it was broken
enough to not get added there.
This fixes CVE-2022-42720.
Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: a3584f56de ("cfg80211: Properly track transmitting and non-transmitting BSS")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When iterating the elements here, ensure the length byte is
present before checking it to see if the entire element will
fit into the buffer.
Longer term, we should rewrite this code using the type-safe
element iteration macros that check all of this.
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we parse a multi-BSSID element, we might point some
element pointers into the allocated nontransmitted_profile.
However, we free this before returning, causing UAF when the
relevant pointers in the parsed elements are accessed.
Fix this by not allocating the scratch buffer separately but
as part of the returned structure instead, that way, there
are no lifetime issues with it.
The scratch buffer introduction as part of the returned data
here is taken from MLO feature work done by Ilan.
This fixes CVE-2022-42719.
Fixes: 5023b14cf4 ("mac80211: support profile split between elements")
Co-developed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Per spec, the maximum value for the MaxBSSID ('n') indicator is 8,
and the minimum is 1 since a multiple BSSID set with just one BSSID
doesn't make sense (the # of BSSIDs is limited by 2^n).
Limit this in the parsing in both cfg80211 and mac80211, rejecting
any elements with an invalid value.
This fixes potentially bad shifts in the processing of these inside
the cfg80211_gen_new_bssid() function later.
I found this during the investigation of CVE-2022-41674 fixed by the
previous patch.
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Fixes: 78ac51f815 ("mac80211: support multi-bssid")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the copy code of the elements, we do the following calculation
to reach the end of the MBSSID element:
/* copy the IEs after MBSSID */
cpy_len = mbssid[1] + 2;
This looks fine, however, cpy_len is a u8, the same as mbssid[1],
so the addition of two can overflow. In this case the subsequent
memcpy() will overflow the allocated buffer, since it copies 256
bytes too much due to the way the allocation and memcpy() sizes
are calculated.
Fix this by using size_t for the cpy_len variable.
This fixes CVE-2022-41674.
Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In error path after calling cn10k_mcs_init(), cn10k_mcs_free() need
be called to avoid memory leak.
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If alloc_mem() fails in mcs_register_interrupts(), it should return error
code.
Fixes: 6c635f78c4 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix wrong pointer passed to PTR_ERR() in dsa_port_phylink_create() to print
error message.
Fixes: cf5ca4ddc3 ("net: dsa: don't leave dangling pointers in dp->pl when failing")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the missing unlock in some error paths.
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
macvlan should enforce a minimal mtu of 68, even at link creation.
This patch avoids the current behavior (which could lead to crashes
in ipv6 stack if the link is brought up)
$ ip link add macvlan1 link eno1 mtu 8 type macvlan # This should fail !
$ ip link sh dev macvlan1
5: macvlan1@eno1: <BROADCAST,MULTICAST> mtu 8 qdisc noop
state DOWN mode DEFAULT group default qlen 1000
link/ether 02:47:6c:24:74:82 brd ff:ff:ff:ff:ff:ff
$ ip link set macvlan1 mtu 67
Error: mtu less than device minimum.
$ ip link set macvlan1 mtu 68
$ ip link set macvlan1 mtu 8
Error: mtu less than device minimum.
Fixes: 91572088e3 ("net: use core MTU range checking in core net infra")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function hfcpci_softirq() is a timer handler. If it
is running, the timer_pending() will return 0 and the
del_timer_sync() in HFC_cleanup() will not be executed.
As a result, the use-after-free bug will happen. The
process is shown below:
(cleanup routine) | (timer handler)
HFC_cleanup() | hfcpci_softirq()
if (timer_pending(&hfc_tl)) |
del_timer_sync() |
... | ...
pci_unregister_driver(hc) |
driver_unregister | driver_for_each_device
bus_remove_driver | _hfcpci_softirq
driver_detach | ...
put_device(dev) //[1]FREE |
| dev_get_drvdata(dev) //[2]USE
The device is deallocated is position [1] and used in
position [2].
Fix by removing the "timer_pending" check in HFC_cleanup(),
which makes sure that the hfcpci_softirq() have finished
before the resource is deallocated.
Fixes: 009fc857c5 ("mISDN: fix possible use-after-free in HFC_cleanup()")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
GCC-12 emits false positive -Warray-bounds warnings with
CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1],
and there is top-level Makefile logic to remove -Warray-bounds for
known-bad GCC versions staring with commit f0be87c42c ("gcc-12: disable
'-Warray-bounds' universally for now").
Remove the local work-around.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
GCC-12 emits false positive -Warray-bounds warnings with
CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1],
and there is top-level Makefile logic to remove -Warray-bounds for
known-bad GCC versions staring with commit f0be87c42c ("gcc-12: disable
'-Warray-bounds' universally for now").
Remove the local work-around.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If you try to create a 'mirror' ACL rule on a port that already has a
mirror rule, prestera_span_rule_add() will fail with EEXIST error.
This forces rollback procedure which destroys existing mirror rule on
hardware leaving it visible in linux.
Add an explicit check for EEXIST to prevent the deletion of the existing
rule but keep user seeing error message:
$ tc filter add dev sw1p1 ... skip_sw action mirred egress mirror dev sw1p2
$ tc filter add dev sw1p1 ... skip_sw action mirred egress mirror dev sw1p3
RTNETLINK answers: File exists
We have an error talking to the kernel
Fixes: 13defa275e ("net: marvell: prestera: Add matchall support")
Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gwangun Jung reported a slab-out-of-bounds access in fib_nh_match:
fib_nh_match+0xf98/0x1130 linux-6.0-rc7/net/ipv4/fib_semantics.c:961
fib_table_delete+0x5f3/0xa40 linux-6.0-rc7/net/ipv4/fib_trie.c:1753
inet_rtm_delroute+0x2b3/0x380 linux-6.0-rc7/net/ipv4/fib_frontend.c:874
Separate nexthop objects are mutually exclusive with the legacy
multipath spec. Fix fib_nh_match to return if the config for the
to be deleted route contains a multipath spec while the fib_info
is using a nexthop object.
Fixes: 493ced1ac4 ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e6 ("net: ipv4: fix route with nexthop object delete warning")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/pkt_sched.h is included twice in enetc_qos.c,
remove one of them.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2334
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Semicolon is not required after curly braces.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2332
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During vm boot, there might be possibility that vf registration
call comes before the vf association from host to vm.
And this might break netvsc vf path, To prevent the same block
vf registration until vf bind message comes from host.
Cc: stable@vger.kernel.org
Fixes: 00d7ddba11 ("hv_netvsc: pair VF based on serial number")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds handling to return -EINVAL for an unknown addr type. The
current behaviour is to return 0 as successful but the size of an
unknown addr type is not defined and should return an error like -EINVAL.
Fixes: 94160108a7 ("net/ieee802154: fix uninit value bug in dgram_sendmsg")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Jan as maintainer for Shared Memory Communications (SMC)
Sockets.
Acked-by: Jan Karcher <jaka@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2022-10-05
Only two patches this time around. A revert from Alexander Aring to a patch
that hit net and the updated patch to fix the problem from Tetsuo Handa.
* tag 'ieee802154-for-net-2022-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
net/ieee802154: don't warn zero-sized raw_sendmsg()
Revert "net/ieee802154: reject zero-sized raw_sendmsg()"
====================
Link: https://lore.kernel.org/r/20221005144508.787376-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Regulator based PSE controller driver relies on regulator support to
be enabled. If regulator support is disabled, it will still compile
fine, but won't operate correctly.
Hence add a dependency on REGULATOR, to prevent asking the user about
this driver when configuring a kernel without regulator support.
Fixes: 66741b4e94 ("net: pse-pd: add regulator based PSE driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/709caac8873ff2a8b72b92091429be7c1a939959.1664900558.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
taprio_attach() has this logic at the end, which should have been
removed with the blamed patch (which is now being reverted):
/* access to the child qdiscs is not needed in offload mode */
if (FULL_OFFLOAD_IS_ENABLED(q->flags)) {
kfree(q->qdiscs);
q->qdiscs = NULL;
}
because otherwise, we make use of q->qdiscs[] even after this array was
deallocated, namely in taprio_leaf(). Therefore, whenever one would try
to attach a valid child qdisc to a fully offloaded taprio root, one
would immediately dereference a NULL pointer.
$ tc qdisc replace dev eno0 handle 8001: parent root taprio \
num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
max-sdu 0 0 0 0 0 200 0 0 \
base-time 200 \
sched-entry S 80 20000 \
sched-entry S a0 20000 \
sched-entry S 5f 60000 \
flags 2
$ max_frame_size=1500
$ data_rate_kbps=20000
$ port_transmit_rate_kbps=1000000
$ idleslope=$data_rate_kbps
$ sendslope=$(($idleslope - $port_transmit_rate_kbps))
$ locredit=$(($max_frame_size * $sendslope / $port_transmit_rate_kbps))
$ hicredit=$(($max_frame_size * $idleslope / $port_transmit_rate_kbps))
$ tc qdisc replace dev eno0 parent 8001:7 cbs \
idleslope $idleslope \
sendslope $sendslope \
hicredit $hicredit \
locredit $locredit \
offload 0
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
pc : taprio_leaf+0x28/0x40
lr : qdisc_leaf+0x3c/0x60
Call trace:
taprio_leaf+0x28/0x40
tc_modify_qdisc+0xf0/0x72c
rtnetlink_rcv_msg+0x12c/0x390
netlink_rcv_skb+0x5c/0x130
rtnetlink_rcv+0x1c/0x2c
The solution is not as obvious as the problem. The code which deallocates
q->qdiscs[] is in fact copied and pasted from mqprio, which also
deallocates the array in mqprio_attach() and never uses it afterwards.
Therefore, the identical cleanup logic of priv->qdiscs[] that
mqprio_destroy() has is deceptive because it will never take place at
qdisc_destroy() time, but just at raw ops->destroy() time (otherwise
said, priv->qdiscs[] do not last for the entire lifetime of the mqprio
root), but rather, this is just the twisted way in which the Qdisc API
understands error path cleanup should be done (Qdisc_ops :: destroy() is
called even when Qdisc_ops :: init() never succeeded).
Side note, in fact this is also what the comment in mqprio_init() says:
/* pre-allocate qdisc, attachment can't fail */
Or reworded, mqprio's priv->qdiscs[] scheme is only meant to serve as
data passing between Qdisc_ops :: init() and Qdisc_ops :: attach().
[ this comment was also copied and pasted into the initial taprio
commit, even though taprio_attach() came way later ]
The problem is that taprio also makes extensive use of the q->qdiscs[]
array in the software fast path (taprio_enqueue() and taprio_dequeue()),
but it does not keep a reference of its own on q->qdiscs[i] (you'd think
that since it creates these Qdiscs, it holds the reference, but nope,
this is not completely true).
To understand the difference between taprio_destroy() and mqprio_destroy()
one must look before commit 13511704f8 ("net: taprio offload: enforce
qdisc to netdev queue mapping"), because that just muddied the waters.
In the "original" taprio design, taprio always attached itself (the root
Qdisc) to all netdev TX queues, so that dev_qdisc_enqueue() would go
through taprio_enqueue().
It also called qdisc_refcount_inc() on itself for as many times as there
were netdev TX queues, in order to counter-balance what tc_get_qdisc()
does when destroying a Qdisc (simplified for brevity below):
if (n->nlmsg_type == RTM_DELQDISC)
err = qdisc_graft(dev, parent=NULL, new=NULL, q, extack);
qdisc_graft(where "new" is NULL so this deletes the Qdisc):
for (i = 0; i < num_q; i++) {
struct netdev_queue *dev_queue;
dev_queue = netdev_get_tx_queue(dev, i);
old = dev_graft_qdisc(dev_queue, new);
if (new && i > 0)
qdisc_refcount_inc(new);
qdisc_put(old);
~~~~~~~~~~~~~~
this decrements taprio's refcount once for each TX queue
}
notify_and_destroy(net, skb, n, classid,
rtnl_dereference(dev->qdisc), new);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and this finally decrements it to zero,
making qdisc_put() call qdisc_destroy()
The q->qdiscs[] created using qdisc_create_dflt() (or their
replacements, if taprio_graft() was ever to get called) were then
privately freed by taprio_destroy().
This is still what is happening after commit 13511704f8 ("net: taprio
offload: enforce qdisc to netdev queue mapping"), but only for software
mode.
In full offload mode, the per-txq "qdisc_put(old)" calls from
qdisc_graft() now deallocate the child Qdiscs rather than decrement
taprio's refcount. So when notify_and_destroy(taprio) finally calls
taprio_destroy(), the difference is that the child Qdiscs were already
deallocated.
And this is exactly why the taprio_attach() comment "access to the child
qdiscs is not needed in offload mode" is deceptive too. Not only the
q->qdiscs[] array is not needed, but it is also necessary to get rid of
it as soon as possible, because otherwise, we will also call qdisc_put()
on the child Qdiscs in qdisc_destroy() -> taprio_destroy(), and this
will cause a nasty use-after-free/refcount-saturate/whatever.
In short, the problem is that since the blamed commit, taprio_leaf()
needs q->qdiscs[] to not be freed by taprio_attach(), while qdisc_destroy()
-> taprio_destroy() does need q->qdiscs[] to be freed by taprio_attach()
for full offload. Fixing one problem triggers the other.
All of this can be solved by making taprio keep its q->qdiscs[i] with a
refcount elevated at 2 (in offloaded mode where they are attached to the
netdev TX queues), both in taprio_attach() and in taprio_graft(). The
generic qdisc_graft() would just decrement the child qdiscs' refcounts
to 1, and taprio_destroy() would give them the final coup de grace.
However the rabbit hole of changes is getting quite deep, and the
complexity increases. The blamed commit was supposed to be a bug fix in
the first place, and the bug it addressed is not so significant so as to
justify further rework in stable trees. So I'd rather just revert it.
I don't know enough about multi-queue Qdisc design to make a proper
judgement right now regarding what is/isn't idiomatic use of Qdisc
concepts in taprio. I will try to study the problem more and come with a
different solution in net-next.
Fixes: 1461d212ab ("net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs")
Reported-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20221004220100.1650558-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core
----
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO.
This significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF
---
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions.
Expose crash_kexec() to allow BPF to trigger a kernel dump.
Use CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs.
Only structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols
---------
- WiFi: more Extremely High Throughput (EHT) and Multi-Link
Operation (MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state
and RST packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API
----------
- Allow selecting the conduit interface used by each port
in DSA switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting
per traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one
of the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much
as possible. It's one of those magic knobs which seemed like
a good idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers
----------------------
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers
-------
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay
window offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Gsio
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCYzxenhAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSYpMA/iWIaLAS5P1Hh5/42NKGjsxwt9sNM6tKivYP
gJidPsq5AQCzj/21kMLPVMxCauKvMRPs84wvLd6W7JwjJvGsigefCg==
=pDda
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"Improve user help for Landlock (documentation and sample)"
* tag 'landlock-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Fix documentation style
landlock: Slightly improve documentation and fix spelling
samples/landlock: Print hints about ABI versions
-----BEGIN PGP SIGNATURE-----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=52r/
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Six audit patches for v6.1, most are pretty trivial, but a quick list
of the highlights are below:
- Only free the audit proctitle information on task exit. This allows
us to cache the information and improve performance slightly.
- Use the time_after() macro to do time comparisons instead of doing
it directly and potentially causing ourselves problems when the
timer wraps.
- Convert an audit_context state comparison from a relative enum
comparison, e.g. (x < y), to a not-equal comparison to ensure that
we are not caught out at some unknown point in the future by an
enum shuffle.
- A handful of small cleanups such as tidying up comments and
removing unused declarations"
* tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: remove selinux_audit_rule_update() declaration
audit: use time_after to compare time
audit: free audit_proctitle only on task exit
audit: explicitly check audit_context->context enum value
audit: audit_context pid unused, context enum comment fix
audit: fix repeated words in comments
-----BEGIN PGP SIGNATURE-----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=RqjF
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The usual round of smaller fixes and cleanups all over the tree
* tag 'x86_cleanups_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype
x86/uaccess: Improve __try_cmpxchg64_user_asm() for x86_32
x86: Fix various duplicate-word comment typos
x86/boot: Remove superfluous type casting from arch/x86/boot/bitops.h
code from the architectural one with the endgoal of plugging ARM's MPAM
implementation into it too so that the user interface remains the same
- Properly restore the MSR_MISC_FEATURE_CONTROL value instead of blindly
overwriting it to 0
-----BEGIN PGP SIGNATURE-----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=1iEb
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
- More work by James Morse to disentangle the resctrl filesystem
generic code from the architectural one with the endgoal of plugging
ARM's MPAM implementation into it too so that the user interface
remains the same
- Properly restore the MSR_MISC_FEATURE_CONTROL value instead of
blindly overwriting it to 0
* tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes
x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's boot_cpu_data
x86/resctrl: Rename and change the units of resctrl_cqm_threshold
x86/resctrl: Move get_corrected_mbm_count() into resctrl_arch_rmid_read()
x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()
x86/resctrl: Pass the required parameters into resctrl_arch_rmid_read()
x86/resctrl: Abstract __rmid_read()
x86/resctrl: Allow per-rmid arch private storage to be reset
x86/resctrl: Add per-rmid arch private storage for overflow and chunks
x86/resctrl: Calculate bandwidth from the previous __mon_event_count() chunks
x86/resctrl: Allow update_mba_bw() to update controls directly
x86/resctrl: Remove architecture copy of mbps_val
x86/resctrl: Switch over to the resctrl mbps_val list
x86/resctrl: Create mba_sc configuration in the rdt_domain
x86/resctrl: Abstract and use supports_mba_mbps()
x86/resctrl: Remove set_mba_sc()s control array re-initialisation
x86/resctrl: Add domain offline callback for resctrl work
x86/resctrl: Group struct rdt_hw_domain cleanup
x86/resctrl: Add domain online callback for resctrl work
x86/resctrl: Merge mon_capable and mon_enabled
...
- By popular demand, print the previous microcode revision an update
was done over
- Remove more code related to the now gone MICROCODE_OLD_INTERFACE
- Document the problems stemming from microcode late loading
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM8QL8ACgkQEsHwGGHe
VUoDxw/9FA3rOAZD7N0PI/vspMUxEDQVYV60tfuuynao72HZv+tfJbRTXe42p3ZO
B+kRPFud4lAOE1ykDHJ2A2OZzvthGfYlUnMyvk1IvK/gOwkkiSH4c6sVSrOYWtl7
uoIN/3J83BMZoWNOKqrg1OOzotzkTyeucPXdWF+sRkfVzBIgbDqtplbFFCP4abPK
WxatY2hkTfBCiN92OSOLaMGg0POpmycy+6roR2Qr5rWrC7nfREVNbKdOyEykZsfV
U2gPm0A953sZ3Ye6waFib+qjJdyR7zBQRCJVEGOB6g8BlNwqGv/TY7NIUWSVFT9Y
qcAnD3hI0g0UTYdToBUvYEpfD8zC9Wg3tZEpZSBRKh3AR2+Xt44VKQFO4L9uIt6g
hWFMBLsFiYnBmKW3arNLQcdamE34GRhwUfXm0OjHTvTWb3aFO1I9+NBCaHp19KVy
HD13wGSyj5V9SAVD0ztRFut4ZESejDyYBw9joB2IsjkY2IJmAAsRFgV0KXqUvQLX
TX13hnhm894UfQ+4KCXnA0UeEDoXhwAbYFxR89yGeOxoGe1oaPXr9C1/r88YLq0n
ekjIVZ3G97PIxmayj3cv9YrRIrrJi4PWF1Raey6go3Ma+rNBRnya5UF6Noch1lHh
HeF7t84BZ5Ub6GweWYaMHQZCA+wMCZMYYuCMNzN7b54yRtQuvCc=
=lWDD
-----END PGP SIGNATURE-----
Merge tag 'x86_microcode_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x75 microcode loader updates from Borislav Petkov:
- Get rid of a single ksize() usage
- By popular demand, print the previous microcode revision an update
was done over
- Remove more code related to the now gone MICROCODE_OLD_INTERFACE
- Document the problems stemming from microcode late loading
* tag 'x86_microcode_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Track patch allocation size explicitly
x86/microcode: Print previous version of microcode after reload
x86/microcode: Remove ->request_microcode_user()
x86/microcode: Document the whole late loading problem
code can do proper arithmetic with their addresses
-----BEGIN PGP SIGNATURE-----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=ibJy
-----END PGP SIGNATURE-----
Merge tag 'x86_paravirt_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt fix from Borislav Petkov:
- Ensure paravirt patching site descriptors are aligned properly so
that code can do proper arithmetic with their addresses
* tag 'x86_paravirt_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/paravirt: Ensure proper alignment
- Correct APM entry's Konfig help text
-----BEGIN PGP SIGNATURE-----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=cNp0
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Borislav Petkov:
- Drop misleading "RIP" from the opcodes dumping message
- Correct APM entry's Konfig help text
* tag 'x86_misc_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Don't mention RIP in "Code: "
x86/Kconfig: Specify idle=poll instead of no-hlt
kernel's optimized ffs()/ffz() helpers in order to make use of the
compiler's constant folding optmization passes.
-----BEGIN PGP SIGNATURE-----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=Reul
-----END PGP SIGNATURE-----
Merge tag 'x86_asm_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm update from Borislav Petkov:
- Use the __builtin_ffs/ctzl() compiler builtins for the constant
argument case in the kernel's optimized ffs()/ffz() helpers in order
to make use of the compiler's constant folding optmization passes.
* tag 'x86_asm_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/bitops: Use __builtin_ctzl() to evaluate constant expressions
x86/asm/bitops: Use __builtin_ffs() to evaluate constant expressions
as both vendors suggest
- Clean up pciserial a bit
-----BEGIN PGP SIGNATURE-----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=Ggh3
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core fixes from Borislav Petkov:
- Make sure an INT3 is slapped after every unconditional retpoline JMP
as both vendors suggest
- Clean up pciserial a bit
* tag 'x86_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,retpoline: Be sure to emit INT3 after JMP *%\reg
x86/earlyprintk: Clean up pciserial
-----BEGIN PGP SIGNATURE-----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=e8H8
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC update from Borislav Petkov:
- Add support for locking the APIC in X2APIC mode to prevent SGX
enclave leaks
* tag 'x86_apic_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Don't disable x2APIC if locked
granularity of the memory error instead of hard-coding it
- Offline memory pages on Intel machines after 2 errors reported per page
-----BEGIN PGP SIGNATURE-----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=5tV9
-----END PGP SIGNATURE-----
Merge tag 'ras_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Fix the APEI MCE callback handler to consult the hardware about the
granularity of the memory error instead of hard-coding it
- Offline memory pages on Intel machines after 2 errors reported per
page
* tag 'ras_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Retrieve poison range from hardware
RAS/CEC: Reduce offline page threshold for Intel systems
always accurate (preemption is enabled at that time) but the print string
contains "likely" and after a lot of back'n'forth on this, this was the
consensus that was reached. See thread starting at:
https://lore.kernel.org/r/5d62c1d0-7425-d5bb-ecb5-1dc3b4d7d245@intel.com
- After a *lot* of testing and polishing, finally the clear_user()
improvements to inline REP; STOSB by default
-----BEGIN PGP SIGNATURE-----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=xLSS
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Print the CPU number at segfault time.
The number printed is not always accurate (preemption is enabled at
that time) but the print string contains "likely" and after a lot of
back'n'forth on this, this was the consensus that was reached. See
thread at [1].
- After a *lot* of testing and polishing, finally the clear_user()
improvements to inline REP; STOSB by default
Link: https://lore.kernel.org/r/5d62c1d0-7425-d5bb-ecb5-1dc3b4d7d245@intel.com [1]
* tag 'x86_cpu_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Print likely CPU at segfault time
x86/clear_user: Make it faster
using the respective functionality from the RTC library
-----BEGIN PGP SIGNATURE-----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=9t5p
-----END PGP SIGNATURE-----
Merge tag 'x86_timers_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RTC cleanups from Borislav Petkov:
- Cleanup x86/rtc.c and delete duplicated functionality in favor of
using the respective functionality from the RTC library
* tag 'x86_timers_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/rtc: Rename mach_set_rtc_mmss() to mach_set_cmos_time()
x86/rtc: Rewrite & simplify mach_get_cmos_time() by deleting duplicated functionality
is running as a guest on the ACRN hypervisor
-----BEGIN PGP SIGNATURE-----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=Ds89
-----END PGP SIGNATURE-----
Merge tag 'x86_platform_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform update from Borislav Petkov:
"A single x86/platform improvement when the kernel is running as an
ACRN guest:
- Get TSC and CPU frequency from CPUID leaf 0x40000010 when the
kernel is running as a guest on the ACRN hypervisor"
* tag 'x86_platform_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acrn: Set up timekeeping
- Improve error decoding speed of the Intel drivers by avoiding the ACPI facilities
but doing decoding in the driver itself
- Other misc improvements to the Intel drivers
- The usual cleanups and fixlets all over EDAC land
-----BEGIN PGP SIGNATURE-----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=Gh9S
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for Skylake-S CPUs to ie31200_edac
- Improve error decoding speed of the Intel drivers by avoiding the
ACPI facilities but doing decoding in the driver itself
- Other misc improvements to the Intel drivers
- The usual cleanups and fixlets all over EDAC land
* tag 'edac_updates_for_v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/i7300: Correct the i7300_exit() function name in comment
x86/sb_edac: Add row column translation for Broadwell
EDAC/i10nm: Print an extra register set of retry_rd_err_log
EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBM
EDAC/skx_common: Add ChipSelect ADXL component
EDAC/ppc_4xx: Reorder symbols to get rid of a few forward declarations
EDAC: Remove obsolete declarations in edac_module.h
EDAC/i10nm: Add driver decoder for Ice Lake and Tremont CPUs
EDAC/skx_common: Make output format similar
EDAC/skx_common: Use driver decoder first
EDAC/mc: Drop duplicated dimm->nr_pages debug printout
EDAC/mc: Replace spaces with tabs in memtype flags definition
EDAC/wq: Remove unneeded flush_workqueue()
EDAC/ie31200: Add Skylake-S support
Combine all queued EDAC changes for submission into v6.1:
* edac-drivers:
EDAC/ie31200: Add Skylake-S support
* edac-misc:
EDAC/i7300: Correct the i7300_exit() function name in comment
x86/sb_edac: Add row column translation for Broadwell
EDAC/i10nm: Print an extra register set of retry_rd_err_log
EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBM
EDAC/skx_common: Add ChipSelect ADXL component
EDAC/ppc_4xx: Reorder symbols to get rid of a few forward declarations
EDAC: Remove obsolete declarations in edac_module.h
EDAC/i10nm: Add driver decoder for Ice Lake and Tremont CPUs
EDAC/skx_common: Make output format similar
EDAC/skx_common: Use driver decoder first
EDAC/mc: Drop duplicated dimm->nr_pages debug printout
EDAC/mc: Replace spaces with tabs in memtype flags definition
EDAC/wq: Remove unneeded flush_workqueue()
Signed-off-by: Borislav Petkov <bp@suse.de>
Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment restrictions.
Specifically, STATX_DIOALIGN works on block devices, and on regular
files when their containing filesystem has implemented support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can be
affected by various filesystem features such as multi-device support,
data journalling, inline data, encryption, verity, compression,
checkpoint disabling, log-structured mode, etc. Further complicating
things, Linux v6.0 relaxed the traditional rule of DIO needing to be
aligned to the block device's logical block size; now user buffers (but
not file offsets) only need to be aligned to the DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page update
https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYzpV2xQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKwF1AQDetPX5hyuq0/mwikOywLTTJsoHgGY5
euO+dISqjH/InwD9HAQqfPRkdM1j4ml82BjjkAfrhzZXOOWPKJm0zOhMIQg=
=0Oav
-----END PGP SIGNATURE-----
Merge tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull STATX_DIOALIGN support from Eric Biggers:
"Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment
restrictions. Specifically, STATX_DIOALIGN works on block devices, and
on regular files when their containing filesystem has implemented
support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can
be affected by various filesystem features such as multi-device
support, data journalling, inline data, encryption, verity,
compression, checkpoint disabling, log-structured mode, etc.
Further complicating things, Linux v6.0 relaxed the traditional rule
of DIO needing to be aligned to the block device's logical block size;
now user buffers (but not file offsets) only need to be aligned to the
DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page
update[1]"
Link: https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org [1]
* tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
xfs: support STATX_DIOALIGN
f2fs: support STATX_DIOALIGN
f2fs: simplify f2fs_force_buffered_io()
f2fs: move f2fs_force_buffered_io() into file.c
ext4: support STATX_DIOALIGN
fscrypt: change fscrypt_dio_supported() to prepare for STATX_DIOALIGN
vfs: support STATX_DIOALIGN on block devices
statx: add direct I/O alignment information
Minor changes to convert uses of kmap() to kmap_local_page().
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYzpKvRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK9KSAP9PyrI3kDLBpiG9os3HIZtHyPHgt6OZ
FA978i0UuAxgHAD7BPiIT55oBdOrn6CVy2g8PkwmkcKQx0kvhVQq8Pyz5ww=
=49pm
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"Minor changes to convert uses of kmap() to kmap_local_page()"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: use kmap_local_page() instead of kmap()
fs-verity: use memcpy_from_page()
This release contains some implementation changes, but no new features:
- Rework the implementation of the fscrypt filesystem-level keyring to
not be as tightly coupled to the keyrings subsystem. This resolves
several issues.
- Eliminate most direct uses of struct request_queue from fs/crypto/,
since struct request_queue is considered to be a block layer
implementation detail.
- Stop using the PG_error flag to track decryption failures. This is a
prerequisite for freeing up PG_error for other uses.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYzpMMRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKxYbAP0VrWjlqonO75gYkIxwX0aTxajoKC3m
awUDAC/feQ910gD6A4WbJivanLngJKgcxfbhN5paalZJEGNOBBrOUB1WLgs=
=CxSh
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"This release contains some implementation changes, but no new
features:
- Rework the implementation of the fscrypt filesystem-level keyring
to not be as tightly coupled to the keyrings subsystem. This
resolves several issues.
- Eliminate most direct uses of struct request_queue from fs/crypto/,
since struct request_queue is considered to be a block layer
implementation detail.
- Stop using the PG_error flag to track decryption failures. This is
a prerequisite for freeing up PG_error for other uses"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: work on block_devices instead of request_queues
fscrypt: stop holding extra request_queue references
fscrypt: stop using keyrings subsystem for fscrypt_master_key
fscrypt: stop using PG_error to track error status
fscrypt: remove fscrypt_set_test_dummy_encryption()
