IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Convert sja1105 to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rvIcT-006bQW-S3@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a Python test for the basic ops.
# ./net/nl_netdev.py
KTAP version 1
1..3
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240412141436.828666-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using "with" on an entire driver test env is supported already,
but it's also useful to use "with" on an individual nsim.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240412141436.828666-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of a summary line print the full exception.
This makes debugging Python tests much easier.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240412141436.828666-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Developing Python tests is a bit annoying because when test fails
we only print the fail message and no info about which exact check
led to it. Print the location (the first line of this example is new):
# At /root/ksft-net-drv/./net/nl_netdev.py line 38:
# Check failed 0 != 10
not ok 3 nl_netdev.page_pool_check
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240412141436.828666-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YNL currently reports None for empty dump:
$ cli.py ...netdev.yaml --dump page-pool-get
None
This doesn't matter for the CLI but when writing YNL based tests
having to deal with either list or None is annoying. Limit the
None conversion to non-dump ops:
$ cli.py ...netdev.yaml --dump page-pool-get
[]
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240412141436.828666-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add very basic page pool use so that we can exercise
the netlink uAPI in a selftest.
Page pool gets created on open, destroyed on close.
But we control allocating of a single page thru debugfs.
This page may survive past the page pool itself so that
we can test orphaned page pools.
Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
net: dqs: optimize if stall threshold is not set
Here are four patches aimed at enhancing the Dynamic Queue Limit (DQL)
subsystem within the networking stack.
The first two commits involve code refactoring, while the third patch
introduces the actual change. The fourth patch just improves the cache
locality.
Typically, when DQL is enabled, stall information is always populated
through dql_queue_stall(). However, this information is only necessary
if a stall threshold is set, which is stored in struct dql->stall_thrs.
Although dql_queue_stall() is relatively inexpensive, it is not entirely
free due to memory barriers and similar overheads.
To optimize performance, refrain from calling dql_queue_stall() when no
stall threshold is set, thus avoiding the processing of unnecessary
information.
v1: https://lore.kernel.org/all/20240404145939.3601097-1-leitao@debian.org/
====================
Link: https://lore.kernel.org/r/20240411192241.2498631-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the previous change, struct dqs->stall_thrs will be in the hot path
(at queue side), even if DQS is disabled.
The other fields accessed in this function (last_obj_cnt and num_queued)
are in the first cache line, let's move this field (stall_thrs) to the
very first cache line, since there is a hole there.
This does not change the structure size, since it moves an short (2
bytes) to 4-bytes whole in the first cache line.
This is the new structure format now:
struct dql {
unsigned int num_queued;
unsigned int last_obj_cnt;
...
short unsigned int stall_thrs;
/* XXX 2 bytes hole, try to pack */
...
/* --- cacheline 1 boundary (64 bytes) --- */
...
/* Longest stall detected, reported to user */
short unsigned int stall_max;
/* XXX 2 bytes hole, try to pack */
};
Also, read the stall_thrs (now in the very first cache line) earlier,
together with dql->num_queued (also in the first cache line).
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240411192241.2498631-5-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When Dynamic Queue Limit (DQL) is set, it always populate stall
information through dql_queue_stall(). However, this information is
only necessary if a stall threshold is set, stored in struct
dql->stall_thrs.
dql_queue_stall() is cheap, but not free, since it does have memory
barriers and so forth.
Do not call dql_queue_stall() if there is no stall threshold set, and
save some CPU cycles.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240411192241.2498631-4-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dql_queued() function currently handles both queuing object counts
and populating bitmaps for reporting stalls.
This commit splits the bitmap population into a separate function,
allowing for conditional invocation in scenarios where the feature is
disabled.
This refactor maintains functionality while improving code
organization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240411192241.2498631-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the dql_queued() function receives an invalid argument, WARN about it
and continue, instead of crashing the kernel.
This was raised by checkpatch, when I am refactoring this code (see
following patch/commit)
WARNING: Do not crash the kernel unless it is absolutely unavoidable--use WARN_ON_ONCE() plus recovery code (if feasible) instead of BUG() or variants
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240411192241.2498631-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julien Panis says:
====================
Add minimal XDP support to TI AM65 CPSW Ethernet driver
This patch adds XDP support to TI AM65 CPSW Ethernet driver.
The following features are implemented: NETDEV_XDP_ACT_BASIC,
NETDEV_XDP_ACT_REDIRECT, and NETDEV_XDP_ACT_NDO_XMIT.
Zero-copy and non-linear XDP buffer supports are NOT implemented.
Besides, the page pool memory model is used to get better performance.
====================
Signed-off-by: Julien Panis <jpanis@baylibre.com>
This patch adds XDP (eXpress Data Path) support to TI AM65 CPSW
Ethernet driver. The following features are implemented:
- NETDEV_XDP_ACT_BASIC (XDP_PASS, XDP_TX, XDP_DROP, XDP_ABORTED)
- NETDEV_XDP_ACT_REDIRECT (XDP_REDIRECT)
- NETDEV_XDP_ACT_NDO_XMIT (ndo_xdp_xmit callback)
The page pool memory model is used to get better performance.
Below are benchmark results obtained for the receiver with iperf3 default
parameters:
- Without page pool: 495 Mbits/sec
- With page pool: 605 Mbits/sec (actually 610 Mbits/sec, with a 5 Mbits/sec
loss due to extra processing in the hot path to handle XDP).
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces a member and the related accessors which can be
used to store descriptor specific additional information. This member
can store, for instance, an ID to differentiate a skb TX buffer type
from a xdpf TX buffer type.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds accessors for desc_size and cpumem members. They may be
used, for instance, to compute a descriptor index.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We've observed a 7-12% performance regression in iperf3 UDP ipv4 and
ipv6 tests with multiple sockets on Zen3 cpus, which we traced back to
commit f0ea27e7bfe1 ("udp: re-score reuseport groups when connected
sockets are present"). The failing tests were those that would spawn
UDP sockets per-cpu on systems that have a high number of cpus.
Unsurprisingly, it is not caused by the extra re-scoring of the reused
socket, but due to the compiler no longer inlining compute_score, once
it has the extra call site in udp4_lib_lookup2. This is augmented by
the "Safe RET" mitigation for SRSO, needed in our Zen3 cpus.
We could just explicitly inline it, but compute_score() is quite a large
function, around 300b. Inlining in two sites would almost double
udp4_lib_lookup2, which is a silly thing to do just to workaround a
mitigation. Instead, this patch shuffles the code a bit to avoid the
multiple calls to compute_score. Since it is a static function used in
one spot, the compiler can safely fold it in, as it did before, without
increasing the text size.
With this patch applied I ran my original iperf3 testcases. The failing
cases all looked like this (ipv4):
iperf3 -c 127.0.0.1 --udp -4 -f K -b $R -l 8920 -t 30 -i 5 -P 64 -O 2
where $R is either 1G/10G/0 (max, unlimited). I ran 3 times each.
baseline is v6.9-rc3. harmean == harmonic mean; CV == coefficient of
variation.
ipv4:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 1743852.66(0.0208) 1725933.02(0.0167) 1705203.78(0.0386)
patched 1968727.61(0.0035) 1962283.22(0.0195) 1923853.50(0.0256)
ipv6:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 1729020.03(0.0028) 1691704.49(0.0243) 1692251.34(0.0083)
patched 1900422.19(0.0067) 1900968.01(0.0067) 1568532.72(0.1519)
This restores the performance we had before the change above with this
benchmark. We obviously don't expect any real impact when mitigations
are disabled, but just to be sure it also doesn't regresses:
mitigations=off ipv4:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 3230279.97(0.0066) 3229320.91(0.0060) 2605693.19(0.0697)
patched 3242802.36(0.0073) 3239310.71(0.0035) 2502427.19(0.0882)
Cc: Lorenz Bauer <lmb@isovalent.com>
Fixes: f0ea27e7bfe1 ("udp: re-score reuseport groups when connected sockets are present")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the ip6_gre and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert dsa_user_phylink_fixed_state() to use the newly introduced
dsa_phylink_to_port() helper.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
AFAICS all users of net_class take a const struct class * argument.
Therefore fully constify net_class.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
gve has supported software timestamp generation since its inception,
but has not advertised that support via ethtool. This patch correctly
advertises that support.
Signed-off-by: John Fraker <jfraker@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Normally, we don't face these two exceptions very often meanwhile
we have some chance to meet the condition where the current cpu id
is the same as skb->alloc_cpu.
One simple test that can help us see the frequency of this statement
'cpu == raw_smp_processor_id()':
1. running iperf -s and iperf -c [ip] -P [MAX CPU]
2. using BPF to capture skb_attempt_defer_free()
I can see around 4% chance that happens to satisfy the statement.
So moving this statement at the beginning can save some cycles in
most cases.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Asbjørn Sloth Tønnesen says:
====================
flower: validate control flags
I have reviewed the flower control flags code.
In all, but one (sfc), the flags field wasn't
checked properly for unsupported flags.
In this series I have only included a single example
user for each helper function. Once the helpers are in,
I will submit patches for all other drivers implementing
flower.
After which there will be:
- 6 drivers using flow_rule_is_supp_control_flags()
- 8 drivers using flow_rule_has_control_flags()
- 11 drivers using flow_rule_match_has_control_flags()
---
Changelog:
v3:
- Added Reviewed-by from Louis Peens (first two patches)
- Properly fixed kernel-doc format
v2: https://lore.kernel.org/netdev/20240410093235.5334-1-ast@fiberby.net/
- Squashed the 3 helper functions to one commmit (requested by Baowen Zheng)
- Renamed helper functions to avoid double negatives (suggested by Louis Peens)
- Reverse booleans in some functions and callsites to align with new names
- Fix autodoc format
v1: https://lore.kernel.org/netdev/20240408130927.78594-1-ast@fiberby.net/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add check for unsupported control flags.
Only compile-tested, no access to HW.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add check for unsupported control flags.
Only compile-tested, no access to HW.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use flow_rule_is_supp_control_flags()
Check the mask, not the key, for unsupported control flags.
Only compile-tested, no access to HW
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These helpers aim to help drivers, with checking
for the presence of unsupported control flags.
For drivers supporting at least one control flag:
flow_rule_is_supp_control_flags()
For drivers using flow_rule_match_control(), but not using flags:
flow_rule_has_control_flags()
For drivers not using flow_rule_match_control():
flow_rule_match_has_control_flags()
While primarily aimed at FLOW_DISSECTOR_KEY_CONTROL
and flow_rule_match_control(), then the first two
can also be used with FLOW_DISSECTOR_KEY_ENC_CONTROL
and flow_rule_match_enc_control().
These helpers mirrors the existing check done in sfc:
drivers/net/ethernet/sfc/tc.c +276
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We lock and unlock rtnl in init/exit for convenience,
but it started causing problems if the exit is handled
by a different thread. To avoid having to futz with
disabling locking assertions move the locking into
the test cases. We don't use ASSERTs so it should
be safe.
============= dev-addr-list-test (6 subtests) ==============
[PASSED] dev_addr_test_basic
[PASSED] dev_addr_test_sync_one
[PASSED] dev_addr_test_add_del
[PASSED] dev_addr_test_del_main
[PASSED] dev_addr_test_add_set
[PASSED] dev_addr_test_add_excl
=============== [PASSED] dev-addr-list-test ================
Link: https://lore.kernel.org/all/20240403131936.787234-7-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
trace_drop_common() is called with preemption disabled, and it acquires
a spin_lock. This is problematic for RT kernels because spin_locks are
sleeping locks in this configuration, which causes the following splat:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 2
5 locks held by rcuc/47/449:
#0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210
#1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130
#2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210
#3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70
#4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290
irq event stamp: 139909
hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80
hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290
softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170
softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0
Preemption disabled at:
[<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0
CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7
Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022
Call Trace:
<TASK>
dump_stack_lvl+0x8c/0xd0
dump_stack+0x14/0x20
__might_resched+0x21e/0x2f0
rt_spin_lock+0x5e/0x130
? trace_drop_common.constprop.0+0xb5/0x290
? skb_queue_purge_reason.part.0+0x1bf/0x230
trace_drop_common.constprop.0+0xb5/0x290
? preempt_count_sub+0x1c/0xd0
? _raw_spin_unlock_irqrestore+0x4a/0x80
? __pfx_trace_drop_common.constprop.0+0x10/0x10
? rt_mutex_slowunlock+0x26a/0x2e0
? skb_queue_purge_reason.part.0+0x1bf/0x230
? __pfx_rt_mutex_slowunlock+0x10/0x10
? skb_queue_purge_reason.part.0+0x1bf/0x230
trace_kfree_skb_hit+0x15/0x20
trace_kfree_skb+0xe9/0x150
kfree_skb_reason+0x7b/0x110
skb_queue_purge_reason.part.0+0x1bf/0x230
? __pfx_skb_queue_purge_reason.part.0+0x10/0x10
? mark_lock.part.0+0x8a/0x520
...
trace_drop_common() also disables interrupts, but this is a minor issue
because we could easily replace it with a local_lock.
Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic
context.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reported-by: Hu Chunyu <chuhu@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- fib rules are already RCU protected, RTNL is not needed
to get them.
- Fix return value at the end of a dump,
so that NLMSG_DONE can be appended to current skb,
saving one recvmsg() system call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240411133340.1332796-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Variable err is being assigned a zero value and it is never read
afterwards in either the break path or continue path, the assignment
is redundant and can be removed. With it removed, the if statement
can also be simplified.
Cleans up clang scan warning:
net/tipc/socket.c:3570:5: warning: Value stored to 'err' is never
read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240411091704.306752-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jijie Shao says:
====================
Support some features for the HNS3 ethernet driver
Currently, the hns3 driver does not have the trace
of the command queue. As a result, it is difficult to
locate the communication between the driver and firmware.
Therefore, the trace function of the command queue is
added in this patch set to facilitate the locating of
communication problems between the driver and firmware.
If a RAS occurs, the driver will automatically reset to attempt
to recover the RAS. Therefore, to locate the cause of the RAS,
it is necessary to save the values of some RAS-related registers
before the reset. So we added a patch in this patch set to
print these information.
====================
Link: https://lore.kernel.org/r/20240410125354.2177067-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to query scc version by devlink info for device V3.
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20240410125354.2177067-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the driver received an interrupte for hardware error,
it will try to restore by resetting. But the hardware registers
will also be reset at this case, which make it hard to analysis
why the hardware error occurs.
This patch dumps these registers before resetting to help
analyze the hardware error occurs.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240410125354.2177067-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
some constants are defined in hclge_debugfs.h,
but only used in hclge_debugfs.c.
so move them from hclge_debugfs.h to hclge_debugfs.c.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240410125354.2177067-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert "NFC: fix attrs checks in netlink interface"
This reverts commit 18917d51472fe3b126a3a8f756c6b18085eb8130.
Our checks found weird attrs present check in function
nfc_genl_dep_link_down() and nfc_genl_llc_get_params(), which are
introduced by commit 18917d51472f ("NFC: fix attrs checks in netlink
interface").
According to its message, it should add checks for functions
nfc_genl_deactivate_target() and nfc_genl_fw_download(). However, it
didn't do that. In fact, the expected checks are added by
(1) commit 385097a36757 ("nfc: Ensure presence of required attributes in
the deactivate_target handler") and
(2) commit 280e3ebdafb8 ("nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME
attribute in nfc_genl_fw_download()"). Perhaps something went wrong.
Anyway, the attr NFC_ATTR_TARGET_INDEX is never accessed in callback
nfc_genl_dep_link_down() and same for NFC_ATTR_FIRMWARE_NAME and
nfc_genl_llc_get_params(). Thus, remove those checks.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20240410034846.167421-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König says:
====================
ptp: Convert to platform remove callback returning void
this series converts all platform drivers below drivers/ptp/ to not use
struct platform_device::remove() any more. See commit 5c5a7680e67b
("platform: Provide a remove callback that returns no value") for an
extended explanation and the eventual goal.
All conversations are trivial, because the driver's .remove() callbacks
returned zero unconditionally.
====================
Link: https://lore.kernel.org/r/cover.1712734365.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/477c6995046eee729447d4f88bf042c7577fe100.1712734365.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/2cc6c137dd43444abb5bdb53693713f7c2c08b71.1712734365.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/5807d0b11214b35f48908fd35cbb7b31b7655ba6.1712734365.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/e8a0de7e8e6d642242350360a938132c7ba0488e.1712734365.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/0f0f5680c1a2a3ef19975935a2c6828a98bc4d25.1712734365.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal says:
====================
selftests: move netfilter tests to net
First patch in this series moves selftests/netfilter/
to selftests/net/netfilter/.
Passing this via net-next rather than nf-next for this reason.
Main motivation is that a lot of these scripts only work on my old
development VM, I hope that placing this in net/ will get these
tests to get run in more regular intervals (and tests get more robust).
Changes are:
- make use of existing 'setup_ns' and 'busywait' helpers
- fix shellcheck warnings
- add more SKIP checks to avoid failures
- get rid of netcat in favor of socat, too many test
failures due to 'wrong' netcat flavor
- do not assume rp_filter sysctl is off
I have more patches that fix up the remaining test scripts,
but the series was too large to send them at once (34 patches).
After all scripts are fixed up, tests pass on both my Debian
and Fedora test machines.
MAINTAINERS is updated to reflect that future updates should be handled
via netfilter-devel@.
====================
Link: https://lore.kernel.org/r/20240411233624.8129-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use busywait helper to wait until socat listener is up to avoid "sleep" calls.
This reduces script execution time slighty (12s to 7s).
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-16-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use socat, the different nc implementations have too much variance wrt.
supported options.
Avoid sleeping until listener is up, use busywait helper for this,
this also greatly reduces test duration.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-15-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also lower ping interval, wait times (helpers get called several times)
and set nodad for ipv6 addresses: 20s down to 4s.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-14-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
