IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
br_set_lockdep_class() is missing many details.
Use generic netdev_lockdep_set_classes() to not worry anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240212140700.2795436-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vlan uses vlan_dev_set_lockdep_class() which lacks qdisc_tx_busylock
initialization.
Use generic netdev_lockdep_set_classes() to not worry anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240212140700.2795436-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adopt net->dev_by_index as I did in commit 0e0939c0ad
("net-procfs: use xarray iterator to implement /proc/net/dev")
Not only this removes quadratic behavior, it also makes sure
an existing vlan device is always visible in the dump,
regardless of concurrent net->dev_base_head changes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240211214404.1882191-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PMD Global Transmit Disable bit should be cleared for normal operation.
This should be HW default, however I found that on Asus RT-AX89X that uses
AQR113C PHY and firmware 5.4 this bit is set by default.
With this bit set the AQR cannot achieve a link with its link-partner and
it took me multiple hours of digging through the vendor GPL source to find
this out, so lets always clear this bit during .config_init() to avoid a
situation like this in the future.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240211181732.646311-1-robimarko@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The prologue to codel is using BSD-3 clause and GPL-2 boiler plate
language. Replace it by using SPDX. The automated treewide scan in
commit d2912cb15b ("treewide: Replace GPLv2 boilerplate/reference with
SPDX - rule 500") did not pickup dual licensed code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Dave Taht <dave.taht@gmail.com>
Link: https://lore.kernel.org/r/20240211172532.6568-1-stephen@networkplumber.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After this commit ba24ea1291 ("net/sched: Retire ipt action")
NET_ACT_IPT is not needed anymore as the action is retired and the code
is removed.
Clean the Kconfig part as well.
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240209180656.867546-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 8a7cb245cf ("net: stmmac: Do not enable RX FIFO overflow
interrupts") disabled the RX FIFO overflow interrupts. However, it left the
status variable around, but never checks it.
As stmmac_host_mtl_irq_status() returns only 0 now, the code can be
simplified.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20240208-stmmac_irq-v1-1-8bab236026d4@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Set scope automatically in ip_route_output_ports() (using the socket
SOCK_LOCALROUTE flag). This way, callers don't have to overload the
tos with the RTO_ONLINK flag, like RT_CONN_FLAGS() does.
For callers that don't pass a struct sock, this doesn't change anything
as the scope is still set to RT_SCOPE_UNIVERSE when sk is NULL.
Callers that passed a struct sock and used RT_CONN_FLAGS(sk) or
RT_CONN_FLAGS_TOS(sk, tos) for the tos are modified to use
ip_sock_tos(sk) and RT_TOS(tos) respectively, as overloading tos with
the RTO_ONLINK flag now becomes unnecessary.
In drivers/net/amt.c, all ip_route_output_ports() calls use a 0 tos
parameter, ignoring the SOCK_LOCALROUTE flag of the socket. But the sk
parameter is a kernel socket, which doesn't have any configuration path
for setting SOCK_LOCALROUTE anyway. Therefore, ip_route_output_ports()
will continue to initialise scope with RT_SCOPE_UNIVERSE and amt.c
doesn't need to be modified.
Also, remove RT_CONN_FLAGS() and RT_CONN_FLAGS_TOS() from route.h as
these macros are now unused.
The objective is to eventually remove RTO_ONLINK entirely to allow
converting ->flowi4_tos to dscp_t. This will ensure proper isolation
between the DSCP and ECN bits, thus minimising the risk of introducing
bugs where TOS values interfere with ECN.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/dacfd2ab40685e20959ab7b53c427595ba229e7d.1707496938.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make mlx5 compatible with the newly added netlink queue GET APIs.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240209202312.30181-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: avoid slow rcu synchronizations in cleanup_net()
RTNL is a contended mutex, we prefer to expedite rcu synchronizations
in contexts we hold RTNL.
Similarly, cleanup_net() is a single threaded critical component and
should also use synchronize_rcu_expedited() even when not holding RTNL.
First patch removes a barrier with no clear purpose in ipv6_mc_down()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
nf_conntrack_cleanup_net_list() is calling synchronize_net()
while RTNL is not held. This effectively calls synchronize_rcu().
synchronize_rcu() is much slower than synchronize_rcu_expedited(),
and cleanup_net() is currently single threaded. In many workloads
we want cleanup_net() to be faster, in order to free memory and various
sysfs and procfs entries as fast as possible.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
cleanup_net() is calling synchronize_rcu() right before
acquiring RTNL.
synchronize_rcu() is much slower than synchronize_rcu_expedited(),
and cleanup_net() is currently single threaded. In many workloads
we want cleanup_net() to be fast, in order to free memory and various
sysfs and procfs entries as fast as possible.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tnode_free() should use synchronize_net()
instead of syncronize_rcu() to release RTNL sooner.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
br_vlan_flush() and nbp_vlan_flush() should use synchronize_net()
instead of syncronize_rcu() to release RTNL sooner.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_change_name() holds RTNL, we better use synchronize_net()
instead of plain synchronize_rcu().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As discussed in the past (commit 2d3916f318 ("ipv6: fix skb drops
in igmp6_event_query() and igmp6_event_report()")) I think the
synchronize_net() call in ipv6_mc_down() is not needed.
Under load, synchronize_net() can last between 200 usec and 5 ms.
KASAN seems to agree as well.
Fixes: f185de28d9 ("mld: add new workqueues for process mld events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suraj Jaiswal says:
====================
Ethernet common fault IRQ support
Changes since v13:
- Update correct sender email
Changes since v12:
- Update correct sender email
Changes since v11:
- Update debug message print
Changes since v10:
- Update commit message
Changes since v9:
- prevent race condition of safety IRQ handling
Changes since v8:
- Use shared IRQ for sfty
- update error message
Changes since v7:
- Add support of common sfty irq on stmmac_request_irq_multi_msi.
- Remove uncecessary blank line.
Changes since v6:
- use name sfty_irq instead of safety_common_irq.
Changes since v5:
- Add description of ECC, DPP, FSM
Changes since v4:
- Fix DT_CHECKER warning
- use name safety for the IRQ.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to listen HW safety IRQ like ECC(error
correction code), DPP(data path parity), FSM(finite state
machine) fault in common IRQ line.
Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add binding doc for safety IRQ. The safety IRQ will be
triggered for ECC(error correction code), DPP(data path
parity), FSM(finite state machine) error.
Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The reported bug is caused by using mii_eee_cap1_mod_linkmode_t()
with an uninitialized bitmap. Fix this by zero-initializing the
struct containing the bitmap.
Fixes: 9bc791341b ("tg3: convert EEE handling to use linkmode bitmaps")
Reported-by: Srikanth Aithal <sraithal@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: variants to drivers, interfaces to a common module
The current driver consists of two interface modules (SMI and MDIO) and
two family/variant modules (RTL8365MB and RTL8366RB). The SMI and MDIO
modules serve as the platform and MDIO drivers, respectively, calling
functions from the variant modules. In this setup, one interface module
can be loaded independently of the other, but both variants must be
loaded (if not disabled at build time) for any type of interface. This
approach doesn't scale well, especially with the addition of more switch
variants (e.g., RTL8366B), leading to loaded but unused modules.
Additionally, this also seems upside down, as the specific driver code
normally depends on the more generic functions and not the other way
around.
Each variant module was converted into real drivers, serving as both a
platform driver (for switches connected using the SMI interface) and an
MDIO driver (for MDIO-connected switches). The relationship between the
variant and interface modules is reversed, with the variant module now
calling both interface functions (if not disabled at build time). While
in most devices only one interface is likely used, the interface code is
significantly smaller than a variant module, consuming fewer resources
than the previous code. With variant modules now functioning as real
drivers, compatible strings are published only in a single variant
module, preventing conflicts.
The patch series introduces a new common module for functions shared by
both variants. This module also absorbs the two previous interface
modules, as they would always be loaded anyway.
The series relocates the user MII driver from realtek-smi to rtl83xx. It
is now used by MDIO-connected switches instead of the generic DSA
driver. There's a change in how this driver locates the MDIO node. It
now only searches for a child node named "mdio".
The dsa_switch in realtek_priv->ds is now embedded in the struct. It is
always in use and avoids dynamic memory allocation.
Testing has been performed with an RTL8367S (rtl8365mb) using MDIO
interface and an RTL8366RB (rtl8366) with SMI interface.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Embed dsa_switch within realtek_priv to eliminate the need for a second
memory allocation.
Suggested-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The realtek-mdio will now use this driver instead of the generic DSA
driver ("dsa user smi"), which should not be used with OF[1].
With a single ds_ops for both interfaces, the ds_ops in realtek_priv is
no longer necessary. Now, the realtek_variant.ds_ops can be used
directly.
The realtek_priv.setup_interface() has been removed as we can directly
call the new common function.
[1] https://lkml.kernel.org/netdev/20220630200423.tieprdu5fpabflj7@bang-olufsen.dk/T/
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the user MDIO driver, despite numerous references to SMI, including
its compatible string, there's nothing inherently specific about the SMI
interface in the user MDIO bus. Consequently, the code has been migrated
to the rtl83xx module. All references to SMI have been eliminated.
The MDIO bus id was changed from Realtek-<switch id> to the switch
devname suffixed with :user_mii, giving more information about the bus
it is referencing.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the line assigning dev.of_node in mdio_bus as subsequent
of_mdiobus_register will always overwrite it.
As discussed in [1], allow the DSA core to be simplified, by not
assigning ds->user_mii_bus when the MDIO bus is described in OF, as it
is unnecessary.
Since commit 3b73a7b8ec ("net: mdio_bus: add refcounting for fwnodes
to mdiobus"), we can put the "mdio" node just after the MDIO bus
registration.
[1] https://lkml.kernel.org/netdev/20231213120656.x46fyad6ls7sqyzv@skbuf/T/#u
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The binding docs requires for SMI-connected devices that the switch
must have a child node named "mdio" and with a compatible string of
"realtek,smi-mdio". Meanwile, for MDIO-connected switches, the binding
docs only requires a child node named "mdio".
This patch changes the driver to use the common denominator for both
interfaces, looking for the MDIO node by name, ignoring the compatible
string.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since rtl83xx and realtek-{smi,mdio} are always loaded together,
we can optimize resource usage by consolidating them into a single
module.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some code can be shared between both interface modules (MDIO and SMI)
and among variants. These interface functions migrated to a common
module:
- rtl83xx_lock
- rtl83xx_unlock
- rtl83xx_probe
- rtl83xx_register_switch
- rtl83xx_unregister_switch
- rtl83xx_shutdown
- rtl83xx_remove
The reset during probe was moved to the end of the common probe. This way,
we avoid a reset if anything else fails.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of copying values from the variant, we can keep a reference in
realtek_priv.
This is a preliminary change for sharing code betwen interfaces. It will
allow to move most of the probe into a common module while still allow
code specific to each interface to read variant fields.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, the interface modules realtek-smi and realtek-mdio served as
a platform and an MDIO driver, respectively. Each interface module
redundantly specified the same compatible strings for both variants and
referenced symbols from the variants.
Now, each variant module has been transformed into a unified driver
serving both as a platform and an MDIO driver. This modification
reverses the relationship between the interface and variant modules,
with the variant module now utilizing symbols from the interface
modules.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a namespace to group the exported symbols.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was never used and never referenced.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TSO and TBS cannot co-exist. TBS requires special descriptor to be
allocated at bootup. Initialising Tx queues at probe to support
TSO and TBS can help in allocating those resources at bootup.
TX queues with TBS can support etf qdisc hw offload.
This is similar to the patch raised by NXP
commit 3b12ec8f61 ("net: stmmac: dwmac-imx: set TSO/TBS TX queues default settings")
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kui-Feng Lee says:
====================
Remove expired routes with a separated list of routes.
This patchset is resent due to previous reverting. [1]
FIB6 GC walks trees of fib6_tables to remove expired routes. Walking a tree
can be expensive if the number of routes in a table is big, even if most of
them are permanent. Checking routes in a separated list of routes having
expiration will avoid this potential issue.
Background
==========
The size of a Linux IPv6 routing table can become a big problem if not
managed appropriately. Now, Linux has a garbage collector to remove
expired routes periodically. However, this may lead to a situation in
which the routing path is blocked for a long period due to an
excessive number of routes.
For example, years ago, there is a commit c7bb4b8903 ("ipv6: tcp:
drop silly ICMPv6 packet too big messages"). The root cause is that
malicious ICMPv6 packets were sent back for every small packet sent to
them. These packets add routes with an expiration time that prompts
the GC to periodically check all routes in the tables, including
permanent ones.
Why Route Expires
=================
Users can add IPv6 routes with an expiration time manually. However,
the Neighbor Discovery protocol may also generate routes that can
expire. For example, Router Advertisement (RA) messages may create a
default route with an expiration time. [RFC 4861] For IPv4, it is not
possible to set an expiration time for a route, and there is no RA, so
there is no need to worry about such issues.
Create Routes with Expires
==========================
You can create routes with expires with the command.
For example,
ip -6 route add 2001:b000:591::3 via fe80::5054:ff:fe12:3457 \
dev enp0s3 expires 30
The route that has been generated will be deleted automatically in 30
seconds.
GC of FIB6
==========
The function called fib6_run_gc() is responsible for performing
garbage collection (GC) for the Linux IPv6 stack. It checks for the
expiration of every route by traversing the trees of routing
tables. The time taken to traverse a routing table increases with its
size. Holding the routing table lock during traversal is particularly
undesirable. Therefore, it is preferable to keep the lock for the
shortest possible duration.
Solution
========
The cause of the issue is keeping the routing table locked during the
traversal of large trees. To solve this problem, we can create a separate
list of routes that have expiration. This will prevent GC from checking
permanent routes.
Result
======
We conducted a test to measure the execution times of fib6_gc_timer_cb()
and observed that it enhances the GC of FIB6. During the test, we added
permanent routes with the following numbers: 1000, 3000, 6000, and
9000. Additionally, we added a route with an expiration time.
Here are the average execution times for the kernel without the patch.
- 120020 ns with 1000 permanent routes
- 308920 ns with 3000 ...
- 581470 ns with 6000 ...
- 855310 ns with 9000 ...
The kernel with the patch consistently takes around 14000 ns to execute,
regardless of the number of permanent routes that are installed.
Majro changes from v5:
- Force syncrhonize GC before query expired routes with
"sysctl -wq net.ipv6.route.flush=1".
Major changes from v4:
- Fix the comment of fib6_add_gc_list().
Major changes from v3:
- Move the checks of f6i->fib6_node to fib6_add_gc_list().
- Make spin_lock_bh() and spin_unlock_bh() stands out.
- Explain the reason of the changes in the commit message of the
patch 4.
Major changes from v2:
- Refactory the boilerplate checks in the test case.
- check_rt_num() and check_rt_num_clean()
Major changes from v1:
- Reduce the numbers of routes (5) in the test cases to work with
slow environments. Due to the failure on patchwork.
- Remove systemd related commands in the test case.
Major changes from the previous patchset [2]:
- Split helpers.
- fib6_set_expires() -> fib6_set_expires() and fib6_add_gc_list().
- fib6_clean_expires() -> fib6_clean_expires() and
fib6_remove_gc_list().
- Fix rt6_add_dflt_router() to avoid racing of setting expires.
- Remove unnecessary calling to fib6_clean_expires() in
ip6_route_info_create().
- Add test cases of toggling routes between permanent and temporary
and handling routes from RA messages.
- Clean up routes by deleting the existing device and adding a new
one.
- Fix a potential issue in modify_prefix_route().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests of changing permanent routes to temporary routes and the reversed
case to make sure GC working correctly in these cases. Add tests for the
temporary routes from RA.
The existing device will be deleted between tests to remove all routes
associated with it, so that the earlier tests don't mess up the later ones.
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the decision to set or clean the expires of a route based on the
RTF_EXPIRES flag, rather than the value of the "expires" argument.
This patch doesn't make difference logically, but make inet6_addr_modify()
and modify_prefix_route() consistent.
The function inet6_addr_modify() is the only caller of
modify_prefix_route(), and it passes the RTF_EXPIRES flag and an expiration
value. The RTF_EXPIRES flag is turned on or off based on the value of
valid_lft. The RTF_EXPIRES flag is turned on if valid_lft is a finite value
(not infinite, not 0xffffffff). Even if valid_lft is 0, the RTF_EXPIRES
flag remains on. The expiration value being passed is equal to the
valid_lft value if the flag is on. However, if the valid_lft value is
infinite, the expiration value becomes 0 and the RTF_EXPIRES flag is turned
off. Despite this, modify_prefix_route() decides to set the expiration
value if the received expiration value is not zero. This mixing of infinite
and zero cases creates an inconsistency.
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FIB6 GC walks trees of fib6_tables to remove expired routes. Walking a tree
can be expensive if the number of routes in a table is big, even if most of
them are permanent. Checking routes in a separated list of routes having
expiration will avoid this potential issue.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The route here is newly created. It is unnecessary to call
fib6_clean_expires() on it.
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the duration of a lifetime (in seconds) to the function
rt6_add_dflt_router() so that it can properly set the expiration time.
The function ndisc_router_discovery() is the only one that calls
rt6_add_dflt_router(), and it will later set the expiration time for the
route created by rt6_add_dflt_router(). However, there is a gap of time
between calling rt6_add_dflt_router() and setting the expiration time in
ndisc_router_discovery(). During this period, there is a possibility that a
new route may be removed from the routing table. By setting the correct
expiration time in rt6_add_dflt_router(), we can prevent this from
happening. The reason for setting RTF_EXPIRES in rt6_add_dflt_router() is
to start the Garbage Collection (GC) timer, as it only activates when a
route with RTF_EXPIRES is added to a table.
Suggested-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test is time sensitive. It may fail on virtual machines and for
debug builds.
Similar to commit c41dfb0dfb ("selftests/net: ignore timing errors in
so_txtime if KSFT_MACHINE_SLOW"), optionally suppress failure for timing
errors (only).
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shinas Rasheed says:
====================
add octeon_ep_vf driver
This driver implements networking functionality of Marvell's Octeon
PCI Endpoint NIC VF.
This driver support following devices:
* Network controller: Cavium, Inc. Device b203
* Network controller: Cavium, Inc. Device b403
* Network controller: Cavium, Inc. Device b103
* Network controller: Cavium, Inc. Device b903
* Network controller: Cavium, Inc. Device ba03
* Network controller: Cavium, Inc. Device bc03
* Network controller: Cavium, Inc. Device bd03
Changes:
V7:
- Separated octep_vf_get_if_stats from octep_vf_main.h to later patch
in [1/8]
- Moved introducing ndo_ops from [3/8] to [5/8]
V6: https://lore.kernel.org/all/20240207065207.3092004-1-srasheed@marvell.com/
- Removed reuse of netif_tx_stop_all_queues, called implicitly in
netif_tx_disable, when stopping netdev
- Corrected error jump labels to have proper action-specific names in
probe function
- Removed singlethreaded workqueue implementation, since only tx
timeout task is run. Run the same in the system workqueue
- netdev_hold when tx_timeout happens to protect against free_netdev
if race occurs between rmmod and a tx timeout. netdev_put the
reference when timeout task ends to progress freeing netdev
V5: https://lore.kernel.org/all/20240129050254.3047778-1-srasheed@marvell.com/
- Changed unchecked return types to void and removed unnecessary
initializations in [2/8] patch.
V4: https://lore.kernel.org/all/20240108124213.2966536-1-srasheed@marvell.com/
- Moved some stats from ethtool and added more to ndo_get_stats64
- Replaced code in IQ full check function to use helper from
net/netdev_queues.h
- Refactored code so that NETDEV_TX_BUSY is avoided
V3: https://lore.kernel.org/all/20240105203823.2953604-1-srasheed@marvell.com/
- Removed UINT64_MAX, which is unused
- Replaced masks and ULL declarations with GENMASK_ULL(), ULL() and
other linux/bits.h macros, corrected declarations to conform to xmas tree format in patch [2/8]
- Moved vfree and vzalloc null pointer casting corrections to patch
[3/8], and corrected return values to follow standard kernel error codes in same
- Set static budget of 64 for tx completion processing in NAPI
- Replaces napi_complete and build_skb APIs to napi_complete_done and
napi_build_skb APIs respectively
- Replaced code with helper from net/netdev_queues.h to wake queues in TX completion
processing
- Removed duplicate reporting of TX/RX packets/bytes, which is already
done during ndo_get_stats64
V2: https://lore.kernel.org/all/20231223134000.2906144-1-srasheed@marvell.com/
- Removed linux/version.h header file from inclusion in
octep_vf_main.c
- Corrected Makefile entry to include building octep_vf_mbox.c in
[6/8] patch.
- Removed redundant vzalloc pointer cast and vfree pointer check in
[6/8] patch.
V1: https://lore.kernel.org/all/20231221092844.2885872-1-srasheed@marvell.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the following ethtool commands:
ethtool -i|--driver devname
ethtool devname
ethtool -S|--statistics devname
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to enable MSI-x and register interrupts.
Add support to process Tx and Rx traffic. Includes processing
Tx completions and Rx refill.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ndo ops to set MAC address, change MTU, get stats.
Add control path support to set MAC address, change MTU, get stats,
set speed, get and set link mode.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement Tx/Rx ring resource allocation and cleanup.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
