IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Use the new macros from mac80211 that do lockdep checking
on the RCU dereferences, instead of hard-coding 1 as the
argument to rcu_dereference_protected().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.112df5c8dec2.I1a1008f5566e509953d988f254d15c9e58630418@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During link switching there might be a link that's marked
active but has no chanctx assigned (so it's not active from
our driver's POV), skip such links in power recalculation
without any warning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c629090bd5d2.If7a680d5e349d454f2122f936c21522b9528a55f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we change only idle, avoid sending the MAC context
command since it doesn't depend on idle state. This
also fixes an issue with the firmware because without
this we send the command during link switching, as we
just deactivated the first link, and we cannot send
this command when there's no active link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.f5218f8453ec.I1325ff14ec07a27dd7ea2c1c210a1721d969839f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we remove the AP station, we iterate over the links
and remove all the keys, however, the key iteration will
return all keys for all links, so skip the ones that we
don't need based on the link ID.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.e724878f502e.I66870d4629244b4b309be79e11cbbd384bdf93be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a fw_id_to_link_sta array in mvm to track the link
STA for each firmware station ID, and then use that to
report the link a frame was received on (since we know
the station ID from firmware).
Notably, this fixes beacon tracking for the correct link
since mac80211 now queues and processes those on the one
link identified by the link ID only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c7dd3ec18077.I12ef9eb4a5b8b5c2b9d6bcaa1fda73b59eba39d8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For management frames sent by an AP interface, translate
the MLD addresses to LINK addresses (for an MLD AP).
AP (non-bufferable) management frames are sent via
the broadcast station so the translation cannot be
done by the firmware.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.3cb4292f51e8.Ia662c00ff271c70eda927c12ed49b045b1eb8489@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add/removed from iwl driver and firmware station links.
Update the station queues accordingly (which station links
are connected to the station queues).
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.156d1aae5de1.I32973141be1190222169879f8caf7038c1a8f769@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace the deflink.addr with the proper link address
for setting the peer_link_address in the station command.
For a non-MLD station, it will be the deflink.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.03ab287da0ae.I88fb5ab4e3ea9c886a3fac7ce09c4791469c3c8e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It has to be done per link. We still don't support keys
configuration for several links, but the single vif link can
still point to a link different from deflink. For now handle
the removal of keys for the default link.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.19d729cc4654.I4ebe8e3eb5fc00a994761f7c0ad40107382705ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We're hitting these while starting to enable MLO in the
driver, but getting them each and every time isn't very
useful one way or the other. Make these warnings trigger
only once.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.f333741d3dcf.If063d4cfe8a583f0f980a1b0ae4e63e17ba4ddc9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Iterate all the links here and check which ones are active,
then adjust them accordingly.
This is still wrong as far as the RSSI event is concerned
(calling iwl_mvm_bt_coex_enable_rssi_event) since we call
that now multiple times, which could overwrite the data;
we need to either make that per link or call it only once,
but need to sort out first what the firmware will be doing
for beacon filtering/beacon abort in MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.fe813fd8de5d.I216236717876510e51e4c21c7fac7691925443f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is more of a workaround, with MLO we can get here with
the deflink not assigned. It's not critical right now that
we have this right, so WARN_ON_ONCE() and don't crash until
we can fix this area of the code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.2b0d31bdb60b.I39d23c76eec16ac49f6ae3a6d5f7652041bde855@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For now we only support a single link, so just use the
deflink's address for the link address, instead of the
STA's (MLD) address, but use the link address anyway
in order to facilitate MLO connections.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c853c8ced3ba.I2e1915d1090c526e6a4c718440b45a7192bbbb03@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With newer MLD firmware API we no longer need beacon timing
information from the host, so disable TIMING_BEACON_ONLY.
If MLO is enabled (currently only for testing), then we must
not have DEAUTH_NEED_MGD_TX_PREP because mac80211 doesn't
support it yet, we'll have to fix that later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.28ec631487bf.I6eb27c3d4c0289a5ec3682f573aae3424f45619f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement the link change ops for links and stations.
Note that the stations one is empty for now as we only
have support for a single link so far, and then the
stations are created with the first link as deflink by
mac80211, so right now we don't really need anything.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.6186c5a37e99.Ifd00d3ee93356ddef273aa18f1e081cd8f2c84ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
vif->bss_conf is used in this function only when TLC is not offloaded,
so not in MLO flow. Simplify the related "if" condition and call
iwl_mvm_hwrate_to_tx_status() only for driver rate scale.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.c6826d5b5477.Ib56ec6025c0da3a381aaf88e71085ce9b96a9e65@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Driver uses link_id as an index in the array. FW currently can
support only 2 concurrently active links per vif with the ids in the
range 0-3. Add a mapping of dirver link ids to fw link id and track the
number of active link ids.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.a53e5df49c33.I02b25648d2d5ca370c0697bf19d0d34724eae8a1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These are two new handlers for MLO. As the configurations done in
bss_info_changed() are now split into two separate flows, use MLO
specific implementation instead of common functions with the non-MLO
code.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.7b238cae0895.Ieb87f204787fb1c7cb7562e1cbf54ef518d87123@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In newer firmware APIs the firmware is responsible for tracking
the DTIM period and other beacon timing, so we don't need to
wait with setting associated. In real MLO operation, mac80211
isn't tracking this anyway, and connections wouldn't work.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.02354241fede.Id957bed3851fdf1fe902d79a1b0338c6d80bc0e1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware now allows adding a link that's not yet bound
to a PHY context. Make use of that to align the driver with
mac80211's API expectations. For now, just add the link at
the same time as the MAC since we don't yet have real MLD
support, but that'll obviously change later. This fixes an
issue with apStaId tracking in the firmware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.097e5008b637.I4e75c6c11e21c08d28ff6a066be36629d3975db6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
HE/EHT support is reported to FW if there's at least one link
that supports it. Configure beacon separately for each link.
Don't send the beacon template before adding the MAC.
Co-developed-by: Johannes Berg <johannes.berg@intel.com>
Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.5ef4efeda2dd.I6ebda2b71c964b9aa63240c9fa1ee0d28099fe6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The LINK cmd host api has been updated. Align the driver to the
new changes. Also, temporary use mac_id for link_id.
Using the phy_id as the link_id is wrong since we might have 2 macs
operating on the same phy - in this case we will have 2 different
links (one for each mac) with the same link_id. On the other hand,
since we don't have MLO implemented yet, we won't have 2 different
links of the same mac. Therefore, we can use the mac_id as the
link_id.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.78ae716884fe.Icfeb2794d9652baaccf9b0cdddbd751d0db4f952@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently we're setting the sta->addr as the peers address only if
the iftype is NL80211_IFTYPE_AP, otherwise we are setting the bssid to
be the addr. This causes bugs in TDLS. Fix this by always using the
sta->addr.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.4c104c3074c4.I78912bb85251033e60db99a65165890779203612@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During CSA the PHY used by the link is changing, So the driver
needs to modify the links phy to the FW. Currently the driver is doing
it by removing the link and adding a new one with the new phy_id, but the
FW expects the link only to be modified. Fix this by modifying the links
phy_id instead of removing it and adding a new one
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.c07ca7aace29.I4ed5c77f4afe1b5da19322734e2f84d51aa541ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The patch linked below fixes the crash on queue removal bug only
for the non-MLD API. Do the same for the MLD API.
Fixes: c5a976cf6a75 ("wifi: iwlwifi: modify new queue allocation command")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.527dace26147.Ia215df5833634f95688a979f39fae70c1ac4e027@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This bitmap indicates what fields of the cmd got changed.
A field will be ignored by the FW if the corresponding flag wasn't set.
There are a few cases in which we currently set the wrong bits when
sending this cmd, which caused FW asserts. Fix this by setting the
correct bits in each case.
Fixes: 1ab26632332e ("wifi: iwlwifi: mvm: Add an add_interface() callback for mld mode")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.19ddbee0c98d.I595abb79d0419c9a21e5234303c2c3fd5290a52a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These flows are the same in both MLD API and the current API,
except for the commands that are being sent during this flows.
Instead of checking each time before calling these floews
what API we use and then call the correct function, call always the old
one, which in turn will call the new one in case we're using the MLD
API.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.5692d8dea9be.Ib1882b2c2f0b0603abc4b7d4a0ecc45cd1fbf9a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This flow is almost the same for both MLD and non-MLD modes,
except for some function calls. Therefore there is no reason to
add an MLD version of this flow. Instead - put the parts that are unique
for each mode in helper functions, and in the next patch each version of
this flow will call the common part with pointers to its specific
helper functions.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.61bc077a7f3c.Ia3aa81d3293792bf8f80528dbc67a711ce334b32@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLD mode we have a new STA cmd. As a result, it is also changes
the flows of adding/updating/removing and handling state of
a station. Add these flows.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.b5548cfd8fe3.I70f9c8f3c95e18d5c9af0a5681e0830893509531@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
WE can't mix between the new MLD API and the old API.
I.e. - we can't send one of the new cmds and then one of the old ones.
This will cause a FW assert. So we need an indication what API should be
used. We use the new API if:
1. FW supports it
2. We are registered to mac80211 with the new MLD ops
Add an indication which will only be true if both conditions are true.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.5756b0907403.I0adce36d1783cce23d0e080e3c4a8953db33b515@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
