IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Replace bootargs and kernel console parameter with 'stdout-path' property
in 'chosen' node to instruct kernel which serial driver should be used
for the kernel console and logs. This allows to enable earlycon messages
by adding just 'earlycon' parameter to kernel command line.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add minimal parameters needed by the Exynos CLKOUT driver to Exynos3250
PMU node. This fixes the following warning on boot:
exynos_clkout_init: failed to register clkout clock
Fixes: d19bb397e19e ("ARM: dts: exynos: Update PMU node with CLKOUT related data")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Odroid HC1 uses the exynos5422-odroid-core.dtsi file as a base. All
other Exynos5422 Odroids use the "common". The ADC node was defined
only in the latter.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
from the Edison tablet and a chosen node for veyron devices.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlxp5qUQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgXsjCACcvu8DsAywvD4A1Ifnj1LCwIfzzTk7Njle
NMtg4xGJDgjuTWYZMWUeIf7/te/sRX5w1T9a+yURxU7q7+aFhquKSIfhncqpKzeI
0glWTsOuIVaQSjn4+R5as6KPOxgWrBLZOolu39HmDnmaAjDn6hb5/NTm+lxSSrQO
R/IJuMSbHL++vPNsP7415hYuZf+5uwFkbOeE7b3nU4zhPFa5IO7WNQlzytf3o4+M
4YqZ+C3eA9/M0izFN2UOvkqKIgHp6ZGGzE1fpcbrM74OqyreZh9CuuBnGbOmSD4N
medTwJEVnuKJRFSmAyXuEUP8+M+RAQOrPZOop/HtvHdRhhfHvrCE
=HTA/
-----END PGP SIGNATURE-----
Merge tag 'v5.1-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
A number of improvements for rv1108 boards, removal of an obsolete property
from the Edison tablet and a chosen node for veyron devices.
* tag 'v5.1-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add chosen node on veyron devices
ARM: dts: rockchip: remove cap-mmc-highspeed from rk3188-bqedison2qc mmc1 node
ARM: dts: rockchip: Use the correct regulator properties on rv1108-evb
ARM: dts: rockchip: Use the correct regulator properties on rv1108-elgin
ARM: dts: rockchip: Fix vcc5/6-supply representation on rv1108-elgin
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The header containing the configuration structure for davinci cpufreq
driver lives in mach-davinci/include/mach/. This is fine for now but
if we want to make davinci part of the multi_v5 build, no code external
to mach-davinci should include machine-specific headers.
Move the configuration structure to include/linux/platform_data.
While we're at it: convert the GPL-2.0 boilerplate to a proper SPDX
license identifier.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- support for a new variant of pca953x
- documentation fix from Wolfram
- some tegra186 name changes
- two minor fixes for madera and altera-a10sr
-----BEGIN PGP SIGNATURE-----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=nV64
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.1-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio updates for v5.1
- support for a new variant of pca953x
- documentation fix from Wolfram
- some tegra186 name changes
- two minor fixes for madera and altera-a10sr
of x86 bug fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJcaQI4AAoJEL/70l94x66DOPwH/0d7JDl2Qr3+1B20hv2++35C
RyG8bMayJq0AATRcjuaFXKiKikZ3NyMHHxaLRwhtcZggU+2FlykEwIKIHvv3L9bj
Rs/YNtIRI21qDSFtOmKnAYnSm10QkngJw7sd5ExHnMTiuCoca3f8EjKnatFgMlzv
UMdMTe9UaMGAl9IKveW56xneR1MDYFG8x69Uu9Si7LkIdMgEAstuJGcTQAt9TzO/
AvbckcN9MKfVCjwvnzsTMaKQMttSHHpOh50gaLlAzPubqfVaqTkSmCvN22+UAk/H
t248x3bHOCO1u1HdHC/sxf8z6HIOFD692eBRmrm5LjBsUFdktUPj7q0U8r9MEK4=
=oHHm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"A somewhat bigger ARM update, and the usual smattering of x86 bug
fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: vmx: Fix entry number check for add_atomic_switch_msr()
KVM: x86: Recompute PID.ON when clearing PID.SN
KVM: nVMX: Restore a preemption timer consistency check
x86/kvm/nVMX: read from MSR_IA32_VMX_PROCBASED_CTLS2 only when it is available
KVM: arm64: Forbid kprobing of the VHE world-switch code
KVM: arm64: Relax the restriction on using stage2 PUD huge mapping
arm: KVM: Add missing kvm_stage2_has_pmd() helper
KVM: arm/arm64: vgic: Always initialize the group of private IRQs
arm/arm64: KVM: Don't panic on failure to properly reset system registers
arm/arm64: KVM: Allow a VCPU to fully reset itself
KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded
arm64: KVM: Don't generate UNDEF when LORegion feature is present
KVM: arm/arm64: vgic: Make vgic_cpu->ap_list_lock a raw_spinlock
KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlock
KVM: arm/arm64: vgic: Make vgic_irq->irq_lock a raw_spinlock
In order to use earlycon, the stdout-path property needs to be set
in the chosen node. All veyron devices use uart2 for debugging, so
add it to the core veyron dtsi.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The mmc1 pins are used for SDIO with a wifi chip.
The function mmc_sdio_switch_hs() only checks for MMC_CAP_SD_HIGHSPEED and
not for MMC_CAP_MMC_HIGHSPEED, so cap-mmc-highspeed can be removed.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The netfilter conflicts were rather simple overlapping
changes.
However, the cls_tcindex.c stuff was a bit more complex.
On the 'net' side, Cong is fixing several races and memory
leaks. Whilst on the 'net-next' side we have Vlad adding
the rtnl-ness support.
What I've decided to do, in order to resolve this, is revert the
conversion over to using a workqueue that Cong did, bringing us back
to pure RCU. I did it this way because I believe that either Cong's
races don't apply with have Vlad did things, or Cong will have to
implement the race fix slightly differently.
Signed-off-by: David S. Miller <davem@davemloft.net>
A fix from Russell that took a while to get applied into fixes as
I thought Russell is merging this one.
-----BEGIN PGP SIGNATURE-----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=0LSw
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.0/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fix omap4 and later lost cpu1 interrupts for periodic timer
A fix from Russell that took a while to get applied into fixes as
I thought Russell is merging this one.
* tag 'omap-for-v5.0/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug
ARM: lpc32xx: platform updates for v5.1
Here are the changes for ARM NXP LPC32xx platform files:
* removed a superfluous record to kernel log buffer under OOM condition,
* use kmemdup() helper instead of kmalloc()/memcpy() pair,
* removed platform data of ARM PL180 SD/MMC and ARM PL111 LCD controllers,
since now both are handled in devicetree files.
* tag 'lpc32xx-soc-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx:
ARM: lpc32xx: remove platform data of ARM PL111 LCD controller
ARM: lpc32xx: remove platform data of ARM PL180 SD/MMC controller
ARM: lpc32xx: Use kmemdup to replace duplicating its implementation
ARM: lpc32xx: Delete an error message for a failed memory allocation in lpc32xx_pm_enter()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Core changes for v5.1-rc1
This contains three fixes for resume from LP1 on Tegra30.
* tag 'tegra-for-5.1-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+
ARM: tegra: Fix DRAM refresh-interval clobbering on resume from LP1 on Tegra30
ARM: tegra: Fix missed EMC registers latching on resume from LP1 on Tegra30+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung mach/soc changes for v5.1
Two fixes: one for handling timeout while booting secondary CPU of
Exynos and second for S3C24xx DVS notifier.
* tag 'samsung-soc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos: Fix timeout when booting secondary CPUs
ARM: s3c24xx: Fix boolean expressions in osiris_dvs_notify
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
DaVinci SoC updates for v5.1 (part 2)
This pull request contains changes needed to help get rid of
hard-coded GPIO base value passed from DaVinci platform data.
The OHCI related changes also help by moving over-current support
from board-files to OHCI driver making future DT-coversion easy.
The OHCI parts are acked by its maintainer.
* tag 'davinci-for-v5.1/soc-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
usb: ohci-da8xx: remove unused callbacks from platform data
ARM: davinci: da830-evm: remove legacy usb helpers
ARM: davinci: omapl138-hawk: remove legacy usb helpers
usb: ohci-da8xx: add vbus and overcurrent gpios
ARM: davinci: da830-evm: use gpio lookup entries for usb gpios
ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios
usb: ohci-da8xx: add a helper pointer to &pdev->dev
usb: ohci-da8xx: add a new line after local variables
ARM: davinci: da850-evm: use GPIO hogs instead of the legacy API
ARM: davinci: mityomapl138: use device properties for at24 eeprom
ARM: davinci: mityomapl138: use nvmem notifiers
ARM: davinci: remove dead code related to MAC address reading
ARM: davinci: sffsdr: use device properties for at24 eeprom
ARM: davinci: sffsdr: fix the at24 eeprom device name
ARM: davinci: dm646x-evm: use device properties for at24 eeprom
ARM: davinci: dm644x-evm: use device properties for at24 eeprom
ARM: davinci: da830-evm: use device properties for at24 eeprom
ARM: davinci: dm365-evm: use device properties for at24 eeprom
ARM: davinci: mityomapl138: don't read the MAC address from machine code
ARM: davinci: da850-evm: remove dead MTD code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX SoC changes for 5.1:
- Support cpuidle for i.MX7ULP, states WFI, WAIT and STOP get added.
- Support SoC revision detecting for i.MX7ULP by reading JTAG_ID
register from SIM module.
- Select PM and GPCv2 irqchip driver options for i.MX8 support, as they
are essential for building an i.MX8 based system.
- Skip build of ssi-fiq code if SND_SOC_IMX_PCM_FIQ is not enabled.
* tag 'imx-soc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: imx8mq: select PM support
arm64: imx8mq: select GPCv2 irqchip driver
ARM: imx: add i.MX7ULP SoC revision support
ARM: imx: add i.MX7ULP cpuidle support
ARM: imx: don't build ssi-fiq if not required
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is the pxa changes for 5.1 cycle:
- the last step of raumfeld board conversion to devicetree is here,
ie. the platform_data file removal
The previous cycle dealt with devicetree inclusion already.
- an empty file removal
* tag 'pxa-for-5.1' of https://github.com/rjarzmik/linux:
ARM: pxa: remove unused empty mach/pxa25x-udc.h file
ARM: pxa: remove raumfeld board files and defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.1, please pull the following:
- Stefan updates the BCM2835 SoC driver with downstream properties and
uses that to implement a reboot notifier to tell the VC4 firmware when
Linux on the ARM CPU is rebooting
- Eric adds a proper power domain driver for the BCM283x SoCs and
updates a bunch of drivers to have a better and clearer Device Tree
definition to support power domains/breaking up of functionality. This
requires converting the existing watchdog driver into a MFD and then
breaking up the functionality into separate drivers and finally
updating the DTS files to leverage the power domains information.
- Wei provides a fix for making a symbol static
-----BEGIN PGP SIGNATURE-----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=t5+u
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes
for 5.1, please pull the following:
- Stefan updates the BCM2835 SoC driver with downstream properties and
uses that to implement a reboot notifier to tell the VC4 firmware when
Linux on the ARM CPU is rebooting
- Eric adds a proper power domain driver for the BCM283x SoCs and
updates a bunch of drivers to have a better and clearer Device Tree
definition to support power domains/breaking up of functionality. This
requires converting the existing watchdog driver into a MFD and then
breaking up the functionality into separate drivers and finally
updating the DTS files to leverage the power domains information.
- Wei provides a fix for making a symbol static
* tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux:
ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.
ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4)
soc: bcm: bcm2835-pm: Make local symbol static
soc: bcm: Make PM driver default for BCM2835
soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4)
firmware: raspberrypi: notify VC4 firmware of a reboot
soc: bcm2835: sync firmware properties with downstream
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds the include/linux/reset directory to MAINTAINERS for reset
specific headers and adds headers for sunxi and socfpga in there to
get rid of a few extern function declarations.
There is a new reset driver for the Broadcom STB reset controller and
the i.MX7 system reset controller driver is extended to support i.MX8MQ
as well. Finally, there is a new header with reset id constants for
the Meson G12A SoC, which has a reset controller identical to Meson AXG
and thus can reuse its driver and DT bindings.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXF2yeRcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwH8jAP9OQaMl5llVXuHSFOwiqkJ2I09p
oROxu3dI/A4q7d5T8QD/Xuo4piSAdoT5YZyHp16NUafW3L1//wqTvxk0ubeTsgA=
=EIyo
-----END PGP SIGNATURE-----
Merge tag 'reset-for-5.1' of git://git.pengutronix.de/git/pza/linux into arm/drivers
Reset controller changes for v5.1
This adds the include/linux/reset directory to MAINTAINERS for reset
specific headers and adds headers for sunxi and socfpga in there to
get rid of a few extern function declarations.
There is a new reset driver for the Broadcom STB reset controller and
the i.MX7 system reset controller driver is extended to support i.MX8MQ
as well. Finally, there is a new header with reset id constants for
the Meson G12A SoC, which has a reset controller identical to Meson AXG
and thus can reuse its driver and DT bindings.
* tag 'reset-for-5.1' of git://git.pengutronix.de/git/pza/linux:
dt-bindings: reset: meson: add g12a bindings
reset: imx7: Add support for i.MX8MQ IP block variant
reset: imx7: Add plubming to support multiple IP variants
reset: Add Broadcom STB SW_INIT reset controller driver
dt-bindings: reset: Add document for Broadcom STB reset controller
reset: socfpga: declare socfpga_reset_init in a header file
reset: sunxi: declare sun6i_reset_init in a header file
MAINTAINERS: use include/linux/reset for reset controller related headers
dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable more drivers in s5pv210 defconfig for Aries family of mobile
devices (e.g. Samsung Galaxy S).
-----BEGIN PGP SIGNATURE-----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=78iS
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.1
Enable more drivers in s5pv210 defconfig for Aries family of mobile
devices (e.g. Samsung Galaxy S).
* tag 'samsung-defconfig-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s5pv210_defconfig: Enable cpufreq
ARM: s5pv210_defconfig: Enable more drivers present on Samsung Aries
ARM: s5pv210_defconfig: Run make savedefconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
updates for 5.1, please pull the following:
- Stefan enables the MMAL-based V4L2 camera driver for the Raspberry Pi
devices
-----BEGIN PGP SIGNATURE-----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=uhZ9
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig file
updates for 5.1, please pull the following:
- Stefan enables the MMAL-based V4L2 camera driver for the Raspberry Pi
devices
* tag 'arm-soc/for-5.1/defconfig' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable BCM2835 MMAL-based V4L2 camera driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx
defconfig files:
* LPC18xx/LPC43xx and LPC32xx defconfig files got updates to match
savedefconfig,
* PL11x LCD controller driver on both LPC18xx/LPC43xx and LPC32xx
has been switched from fbdev to DRM one,
* drivers of GPIO controllers not found on LPC32xx boards are disabled,
* LPC32xx gets enabled additional sane debugging options: panic on oops,
sysrq, dynamic debug, timestamps in kernel log buffer and built GDB
scripts,
* LPC32xx gets enabled NFSv4 support,
* LPC32xx gets enabled a number of used drivers: DRM simple panel,
fixed voltage regulator and generic SRAM drivers,
* Option to have a serial console on HS UART on LPC32xx is enabled.
-----BEGIN PGP SIGNATURE-----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=nR4K
-----END PGP SIGNATURE-----
Merge tag 'lpc32xx-defconfig-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx into arm/defconfig
ARM: lpc32xx: defconfig updates for v5.1
Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx
defconfig files:
* LPC18xx/LPC43xx and LPC32xx defconfig files got updates to match
savedefconfig,
* PL11x LCD controller driver on both LPC18xx/LPC43xx and LPC32xx
has been switched from fbdev to DRM one,
* drivers of GPIO controllers not found on LPC32xx boards are disabled,
* LPC32xx gets enabled additional sane debugging options: panic on oops,
sysrq, dynamic debug, timestamps in kernel log buffer and built GDB
scripts,
* LPC32xx gets enabled NFSv4 support,
* LPC32xx gets enabled a number of used drivers: DRM simple panel,
fixed voltage regulator and generic SRAM drivers,
* Option to have a serial console on HS UART on LPC32xx is enabled.
* tag 'lpc32xx-defconfig-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx:
ARM: defconfig: lpc32xx: enable DRM simple panel driver
ARM: defconfig: lpc32xx: enable fixed voltage regulator support
ARM: defconfig: lpc32xx: disable superfluous GPIO controllers
ARM: defconfig: lpc32xx: enable generic SRAM driver
ARM: defconfig: lpc32xx: enable serial console on HS UART
ARM: defconfig: lpc32xx: enable panic on oops option
ARM: defconfig: lpc32xx: enable build options for basic debugging
ARM: defconfig: lpc32xx: enable NFSv4 support
ARM: defconfig: Switch LPC32xx to use PL11x DRM driver
ARM: defconfig: Update LPC32xx defconfig
ARM: defconfig: Switch LPC18xx to use PL11x DRM driver
ARM: defconfig: Update LPC18xx defconfig
shmobile and multi_v7 defconfig
* Enable support for recently upstreamed RZ/A2 (r7s9210) SoC
* Enable NXP pcf85363 RTC which is used on RZ/G1C (r8a77470) based iWave SBC
shmobile defconfig
* Refresh for changes present in v5.0-rc1
-----BEGIN PGP SIGNATURE-----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=8/bA
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig
Renesas ARM Based SoC Defconfig Updates for v5.1
shmobile and multi_v7 defconfig
* Enable support for recently upstreamed RZ/A2 (r7s9210) SoC
* Enable NXP pcf85363 RTC which is used on RZ/G1C (r8a77470) based iWave SBC
shmobile defconfig
* Refresh for changes present in v5.0-rc1
* tag 'renesas-arm-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable support for RZ/A2
ARM: shmobile: defconfig: Enable support for RZ/A2
ARM: shmobile: defconfig: Refresh for v5.0-rc1
ARM: multi_v7_defconfig: Enable NXP pcf85363 rtc
ARM: shmobile: Enable NXP pcf85363 rtc in shmobile_defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop PROVE_LOCKING as it should not be enabled in the defconfig. It
causes quite a bit overhead as noted in the patch description.
Then let's update omap2plus_defconfig for dropped options and moved
options. That way makesavedefconfig can actually be used to generate
patches against omap2plus_defconfig.
-----BEGIN PGP SIGNATURE-----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=Cia+
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.1/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps
Drop PROVE_LOCKING as it should not be enabled in the defconfig. It
causes quite a bit overhead as noted in the patch description.
Then let's update omap2plus_defconfig for dropped options and moved
options. That way makesavedefconfig can actually be used to generate
patches against omap2plus_defconfig.
* tag 'omap-for-v5.1/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Update for moved options
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: remove PROVE_LOCKING from defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We add support for Bosch Guardian am335x device, and configure more
devices like GNSS and LCD backlight for omap3-gta04. And we replace
the wlcore binding documentation URL with a local file that we have.
-----BEGIN PGP SIGNATURE-----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=gumh
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.1/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
More dts changes for omaps
We add support for Bosch Guardian am335x device, and configure more
devices like GNSS and LCD backlight for omap3-gta04. And we replace
the wlcore binding documentation URL with a local file that we have.
* tag 'omap-for-v5.1/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3-gta04: declare backlight in lcd node
ARM: dts: am335x: Add support for Bosch Guardian
ARM: dts: gta04: add gps support
ARM: dts: gta04: add ldo 3v3 regulator
ARM: dts: gta04: add pinctrl settings for wkup domain
ARM: dts: omap3-gta04a5: Replace LXR reference with a local one
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Use new "wakeup-source" instead of "gpio-key,wakeup" in Z-Turn
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlxiwoEACgkQykllyylKDCGAJQCbB4cK6W0fXAfw/Zi7mHBEo0yL
lxEAn3/zTTTB2DFB+kimxZFZcHJaEY11
=dMVs
-----END PGP SIGNATURE-----
Merge tag 'zynq-dt-for-v5.1' of https://github.com/Xilinx/linux-xlnx into arm/dt
ARM: dts: zynq: DT changes for v5.1
- Use new "wakeup-source" instead of "gpio-key,wakeup" in Z-Turn
* tag 'zynq-dt-for-v5.1' of https://github.com/Xilinx/linux-xlnx:
ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: Logic PD i.MX6QD EVM, ZII SSMB DTU, Phytec
phyBOARD i.MX6UL Segin, Y Soft IOTA Draco, Hydra and Ursa boards.
- Add regulator control for various sensors on imx6qdl-sabresd board.
- Add DISPLAY power domain support for i.MX6SX SoC.
- Add stmpe-adc device node for Toradex iMX6 module.
- Switch to SPDX identifier for imx6q-tbs2910 board.
- Add proper ksz9031 clock skew values for imx6qdl-phytec-pfla02 board.
- Mark I2C recovery GPIOs as open drain and correct and WEIM range
configuration for apalis/colibri boards.
- Small and random updates to various devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcYo+8AAoJEFBXWFqHsHzO+D0H/3RYArKxp1FJ2QVS2w4uE2O7
eWycgtie8d4x84/hdMG72sU/x0hZm0v1kXUGO9Yt17dgX3Dg1Sfv7bECqZAHvG11
6dMuG5u3lCLjQQLieAAUvxpWFCne3gSWVQnb0o/zWiHBeGNQJt42hacLNYaJSqTL
Vao3wiiGTZvVih6B+ueFi4Im/VChEn5rnKmjCqkFTAlUIpVvzLZqY8Jy+vjVC3aP
5tLq8WnStJqgFgxtRpVKDsdu2KjJKCozpw0KZyM3MYQ4blGCCbFpFfyGfBeNves5
xCWrx//rt//ol09X5UXtz4T+/QKC5390styCA9m+XgSFcFSYKgjps+9iD+5a1tk=
=OH8n
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree changes for 5.1:
- New board support: Logic PD i.MX6QD EVM, ZII SSMB DTU, Phytec
phyBOARD i.MX6UL Segin, Y Soft IOTA Draco, Hydra and Ursa boards.
- Add regulator control for various sensors on imx6qdl-sabresd board.
- Add DISPLAY power domain support for i.MX6SX SoC.
- Add stmpe-adc device node for Toradex iMX6 module.
- Switch to SPDX identifier for imx6q-tbs2910 board.
- Add proper ksz9031 clock skew values for imx6qdl-phytec-pfla02 board.
- Mark I2C recovery GPIOs as open drain and correct and WEIM range
configuration for apalis/colibri boards.
- Small and random updates to various devices.
* tag 'imx-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits)
ARM: dts: imx: Add support for Logic PD i.MX6QD EVM
ARM: dts: imx6qdl-sabresd: remove reg_sensors' regulator-always-on
ARM: dts: imx6qdl-sabresd: add regulators control for mma8451 sensor
ARM: dts: imx6qdl-sabresd: add regulators control for mag3110 sensor
ARM: dts: imx6qdl-sabresd: add regulator control for isl29023 sensor
ARM: dts: vf610: Add ZII SSMB DTU board
ARM: dts: pfla02: add ksz9031 clock skew values
ARM: dts: imx6qdl-phytec-pfla02: add missing interrupt-controller property
ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules
ARM: dts: Add devicetree compatibles for LS1021A based boards
ARM: dts: colibri: use valid range configuration for weim
ARM: dts: imx6: Add support for Phytec phyBOARD i.MX6UL Segin
ARM: dts: imx6*-apalis/-colibri: mark I2C recovery GPIOs as open drain
ARM: dts: vf610-zii-ssmb-spu3: Pass "no-sdio"/"no-sd" properties
ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards
ARM: dts: imx7ulp: add sim node
ARM: dts: imx6ull: change to use new compatible "fsl,imx6ull-usdhc" for usdhc
ARM: dts: imx6ull: Fix i.MX6ULL/ULZ ocotp compatible
ARM: dts: imx6sx: Add DISPLAY power domain support
ARM: dts: i.MX51: digi-connectcore-som: Add support for I2C bus recovery
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- more features for Endless EC100 board
- chip temperature sensor support
- fix ethernet pins
- add Mali-450 GPU
-----BEGIN PGP SIGNATURE-----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=PNC5
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: Amlogic updates for v5.1
- more features for Endless EC100 board
- chip temperature sensor support
- fix ethernet pins
- add Mali-450 GPU
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: ec100: add the GPIO line names
ARM: dts: meson8b: ec100: improve the description of the regulators
ARM: dts: meson8b: ec100: enable the Ethernet PHY interrupt
ARM: dts: meson8m2: mxiii-plus: add iio-hwmon for the chip temperature
ARM: dts: meson8b: odroidc1: add iio-hwmon for the chip temperature
ARM: dts: meson8b: ec100: add iio-hwmon for the chip temperature
ARM: dts: meson8b: add the temperature calibration data for the SAR ADC
ARM: dts: meson8: add the temperature calibration data for the SAR ADC
ARM: dts: meson8m2: use the Meson8m2 specific SAR ADC compatible
ARM: dts: meson: switch the clock controller to the HHI register area
ARM: dts: meson8b: fix the Ethernet data line signals in eth_rgmii_pins
ARM: dts: meson8b: add the Mali-450 MP2 GPU
ARM: dts: meson8: add the Mali-450 MP6 GPU
dt-bindings: gpu: mali-utgard: add Amlogic Meson8 and Meson8b compatible
ARM: dts: meson8b: add the APB bus
ARM: dts: meson8: add the APB bus
ARM: dts: meson6: add the APB2 bus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Contains a single patch that adds the "jedec,spi-nor" compatible string
where appropriate.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlxdmP0THHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoe4QD/4kFg14Rd4ERRZU31B5MNTmVETqEPx4
FGyR0FvMP0eNQCTJE/hrI9yiPVdB1ryE9YU//rsfIcezpTcsLbquEb2QqJqrP5y1
cdENJ7vi5kRV7xIh/UzkaYvg5qp2gYZVL7wMvPfuaSXqExcZqoyiNnHnGbP2oJzg
/GM1doEe8yck6WGLipJMyYtXkWAQydUwhNuWSAMXHKrgisIdB1/BSVXT3Ty9LpXC
doroWS/CeW3QN+VfqXPObXWM4f2EX7ApThblb7cvt55jbb8CenQXlszFGcPq4L29
ZV0s04mNBwXbJl4W0ilaXfCWceyjOx3EPeYJ/XA9khswyFVg7TVXV+AsevSbONya
bfm7c2x5Km35olPTlKo14qhcUw9ExfxyiC/rwi08/LI6wNZFSux9ZYNJL5EYPrxI
7F4ULcJaTG1K/LQy6xXrh98xRy0sSsSklFfGZ8DdOFuHEpHI+RQaWfOXYD4T+2QN
oZIA4x93zbRbvOQGkO7sMm1I9Oa3EI+PRG6QBHJyn/uMbaeA1gdtPr/gpwccTQo1
stgRLDwaxcUuvD0Byz2jAkgOoN2bPUdjqXWnKqHXFSiFoJj2IQOdJqNLw9NfB3j/
JrDOHHsJyHaAKovVAvaGi0zF83ZspVMyw4OnwyCCmeGqUX1BXwHCYzJWI7f+4WQS
R5wzq2pVU4+Opg==
=Cuag
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.1-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.1-rc1
Contains a single patch that adds the "jedec,spi-nor" compatible string
where appropriate.
* tag 'tegra-for-5.1-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: add "jedec,spi-nor" flash compatible binding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* R-Car H2 (r8a7790) based Stout board
- Convert to new LVDS DT bindings
* R-Car H1 (r8a7779) and M1A (r8a7778) SoCs
- Describe HSCIF0/1 devices in DT
* RZ/G1M (r8a7743) SoC
- Correct sort order of the RWDT node
- Remove aliases: should be defined in board rather than SoC DT if needed
- Remove generic compatible string from iic3: it is not compatible
* RZ/G1N (r8a7744) SoC
- Describe LVDS and DU devices in DT
- Correct sort order of VSP and MSIOF noces
* RZ/G1C (r8a7747) based iWave SBC
- Enable RTC
* RZ/A2M (r7s9210) SoC and EVB
- Initial support
-----BEGIN PGP SIGNATURE-----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=q0l0
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt
Renesas ARM Based SoC DT Updates for v5.1
* R-Car H2 (r8a7790) based Stout board
- Convert to new LVDS DT bindings
* R-Car H1 (r8a7779) and M1A (r8a7778) SoCs
- Describe HSCIF0/1 devices in DT
* RZ/G1M (r8a7743) SoC
- Correct sort order of the RWDT node
- Remove aliases: should be defined in board rather than SoC DT if needed
- Remove generic compatible string from iic3: it is not compatible
* RZ/G1N (r8a7744) SoC
- Describe LVDS and DU devices in DT
- Correct sort order of VSP and MSIOF noces
* RZ/G1C (r8a7747) based iWave SBC
- Enable RTC
* RZ/A2M (r7s9210) SoC and EVB
- Initial support
* tag 'renesas-arm-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r8a7744: Add LVDS support
ARM: dts: r8a7744: Add DU support
ARM: dts: r7s9210-rza2mevb: Add support for RZ/A2M EVB
ARM: dts: r7s9210: Initial SoC device tree
ARM: dts: r8a7779: Add HSCIF0/1 device nodes
ARM: dts: r8a7778: Add HSCIF0/1 support
ARM: dts: r8a7743: Fix sorting of rwdt node
ARM: dts: r8a7743: Remove aliases from SoC dtsi
ARM: dts: r8a7743: Remove generic compatible string from iic3
ARM: dts: r8a7744: Fix sorting of vsp and msiof nodes
ARM: dts: iwg23s-sbc: Enable RTC
ARM: dts: stout: Convert to new LVDS DT bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Deny autoidle for hwmods with the OCPIF_SWSUP_IDLE flag,
that makes hwmods working properly which cannot handle
autoidle properly in lower power states.
Affected is e. g. the omap_hdq.
Since an ick might have mulitple users, autoidle is disabled
when an individual user requires that rather than in
_setup_iclk_autoidle. dss_ick is an example for that.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Our usual round of DT changes shared between arm and arm64.
We have a bunch of changes for board, improving the eMMC support on the H5
variant of the All-H3-CC, enabling HDMI and reworking the CSI driver.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXF1X8QAKCRDj7w1vZxhR
xX9ZAP9KwFKKehrS1QJjTHKeowUKEnRHuDj2MlwTZJgCw/AMMgEAzgRZwY/VH/Os
aQIhJho9hWmBE0dePIZuWzzCp1giNw8=
=7jQV
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner H3 and H5 changes for 5.1
Our usual round of DT changes shared between arm and arm64.
We have a bunch of changes for board, improving the eMMC support on the H5
variant of the All-H3-CC, enabling HDMI and reworking the CSI driver.
* tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: libretech-all-h3-cc: Mark eMMC HS-DDR 3.3V capable
ARM: dts: sunxi: h3/h5: Drop A31 fallback compatible for CSI controller
ARM: dts: sun8i-h3: nanopi-m1-plus: enable HDMI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add SMMU node for Stratix10
- Add vendor prefix fo Novtech
- Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA
- Add missing reset properties for all IP on Cyclone5 and Arria10
-----BEGIN PGP SIGNATURE-----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=8OgV
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.1
- Add SMMU node for Stratix10
- Add vendor prefix fo Novtech
- Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA
- Add missing reset properties for all IP on Cyclone5 and Arria10
* tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: update more missing reset properties
ARM: dts: socfpga: update missing reset property peripherals
ARM: dts: Add support for 96Boards Chameleon96 board
dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix
arm64: dts: stratix10: Add Stratix10 SMMU support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Fixup GIC IRQ flags and GSBI state on MSM8660
* Add USB OTG, gpio ranges, and Wifi support on MSM8974 Hammerhead
* Remove skeleton.dtsi on IPQ4019
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0M2a
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt
Qualcomm Device Tree Changes for v5.1
* Fixup GIC IRQ flags and GSBI state on MSM8660
* Add USB OTG, gpio ranges, and Wifi support on MSM8974 Hammerhead
* Remove skeleton.dtsi on IPQ4019
* tag 'qcom-dts-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: ipq4019: Remove skeleton.dtsi
ARM: dts: qcom: msm8974-hammerhead: add USB OTG support
ARM: dts: qcom: msm8974: add gpio-ranges
ARM: dts: qcom: msm8974-hammerhead: add WiFi support
ARM: dts: msm8660: Fix up GIC IRQ flags
ARM: dts: msm8660: Mark two GSBI blocks "disabled"
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx
devicetree files:
* added dts file for MYIR Tech MYD-LPC4357 development board,
* two missing properties are added to LPC32xx keypad controller device
tree node, this fixes a long-standing problem with its initialization,
* LPC32xx PL11x LCD controller device node got corrected properties,
which allows to use it with a new PL11x DRM driver,
* output voltage level on one of Phytec phyCORE-LPC3250 fixed regulators
is corrected, the fix is needed to remove duplicating platform data,
* Phytec phyCORE-LPC3250 board gets a description of a kit LCD panel,
this completes setup of CLCD device tree node for the board,
* added unit addresses to memory device nodes on EA and Phytec boards,
* fixes of ordinary warnings in dts formatting like leading zeroes,
unused address and size cell properties and so on.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEETKMJMWSwX7CFTVIOqj3i2jwlOWUFAlxXTzIACgkQqj3i2jwl
OWXBRA//RCAfC/GhIyZF1uHIhj/G85sAWuGSYQ90+fEVtyzb1Y+yeBRKkNH2Xi8C
LkSzD58z/1BTaYz68EaRENU3xCkBcBHH8ZymqJP8/pG+/AoLVIg7/wkeFj/BCC80
rESTV4IjTFdbAaqmM8Y/rcWuPTs5fgxZzFdCgqY0FuTee5hx5aLQkA39cIPWJLJz
Ox+e/Yhs00blWZUFyitP5sd/rnVeuNXWqY0VnN8hG4oH4+GJOA8QAIzzq1DTKaj0
43073ymRw4ZOry0qfsbRvjQZwvSAQD+kZx24DXwP+6YFdW8DqdAZPkuCYYMV10JO
tiOg6hHHjM1lKJWom/6N1Z9layMZeyPxBRYQ2Tpn3+5Or05iHgAhbYv5kRvIBZ8W
cL8hA9SNb/g4yRa67GBINdGHlf3nRBvqDgOR0OQEF3Q/JTFferJOb3MhGuIX1fS7
39JRIndLJD10SoK/Nezvc68myei8aQ+YTQBzaNkm3q4q4SuLF9nEb92s313yvzKv
vBwMuaGuTL+pBvDR3qGsFHxrExj1DIbecYqGdvGj0lmSZbNPWeR2ZSj6XGfT18x3
pCmr7C6brY6jWsp6p8nG7ovFkPqv3X3x/gBszLFGFaEedkssabfLesWdZooHIAgJ
Fa6Lc2M7AAwxHT1YDn6+ojrr/yhaQoaray/+aOT9WAwAhElpc24=
=J1uJ
-----END PGP SIGNATURE-----
Merge tag 'lpc32xx-dt-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx into arm/dt
ARM: lpc32xx: devicetree updates for v5.1
Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx
devicetree files:
* added dts file for MYIR Tech MYD-LPC4357 development board,
* two missing properties are added to LPC32xx keypad controller device
tree node, this fixes a long-standing problem with its initialization,
* LPC32xx PL11x LCD controller device node got corrected properties,
which allows to use it with a new PL11x DRM driver,
* output voltage level on one of Phytec phyCORE-LPC3250 fixed regulators
is corrected, the fix is needed to remove duplicating platform data,
* Phytec phyCORE-LPC3250 board gets a description of a kit LCD panel,
this completes setup of CLCD device tree node for the board,
* added unit addresses to memory device nodes on EA and Phytec boards,
* fixes of ordinary warnings in dts formatting like leading zeroes,
unused address and size cell properties and so on.
* tag 'lpc32xx-dt-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx:
ARM: dts: lpc32xx: ea3250: beautify gpio keys children nodes
ARM: dts: lpc32xx: ea3250: add unit address to memory device node
ARM: dts: lpc32xx: phy3250: add unit address to memory device node
ARM: dts: lpc32xx: phy3250: setup LCD controller to panel interface
ARM: dts: lpc32xx: phy3250: remove regulators umbrella device node
ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage
ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property
ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant
ARM: dts: lpc32xx: reparent keypad controller to SIC1
ARM: dts: lpc32xx: add required clocks property to keypad device node
ARM: dts: Add DT for MYIR Tech MYD-LPC4357 Development Board
ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation
ARM: dts: lpc435x: remove address and size cells from gpio-keys-polled nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.1, please pull the following:
- Dan relicenses the Luxul DTS files to GPL 2.0+/MIT
- Hao adds support for the Phicomm K3 which is a BCM4709 SoC with dual
BCM4366 radio
- Stefan adds support for the Raspberry Pi A+: binding and DTS files. He
also provides a bunch of DTC warning fixes for the different RPi DTS(i)
files and adds support for missing GPIO lines on RPi 2/3
-----BEGIN PGP SIGNATURE-----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=Ykbm
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.1, please pull the following:
- Dan relicenses the Luxul DTS files to GPL 2.0+/MIT
- Hao adds support for the Phicomm K3 which is a BCM4709 SoC with dual
BCM4366 radio
- Stefan adds support for the Raspberry Pi A+: binding and DTS files. He
also provides a bunch of DTC warning fixes for the different RPi DTS(i)
files and adds support for missing GPIO lines on RPi 2/3
* tag 'arm-soc/for-5.1/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrl
ARM: dts: bcm283x: Add missing GPIO line names
ARM: dts: bcm2837-rpi-3-b-plus: Clarify label for STATUS_LED
ARM: dts: bcm2837-rpi-3-b: Use consistent label for HDMI hotplug
ARM: dts: bcm2835: Fix labels for GPIO 0,1
ARM: dts: bcm2835-rpi: Drop unnecessary #address-cells/#size-cells
ARM: dts: bcm283x: Fix DTC warning for memory node
ARM: dts: add Raspberry Pi 3 A+
dt-bindings: bcm: Add Raspberry Pi 3 A+
ARM: dts: BCM5301X: Add basic DT for Phicomm K3
ARM: dts: BCM53573: Relicense Luxul files to the GPL 2.0+ / MIT
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Extend support for Aries family of mobile devices (e.g. Samsung
Galaxy S) based on S5Pv210 SoC: DRM Rotator, FIMD, PWM vibrator,
power off, touchscreen, Broadcom BCM4329 Bluetooth and cpufreq.
2. Remove hardcoded bootargs on Galaxy S family (proper support in
U-Boot).
3. Fix minor DTC warnings.
4. Fix Exynos4412 Odroid X2/U3 conflicting eMMC GPIO settings and regulator
properties.
5. Fix the eMMC RTSN pin breaking proper reboot on X2.
-----BEGIN PGP SIGNATURE-----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=9+iJ
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.1
1. Extend support for Aries family of mobile devices (e.g. Samsung
Galaxy S) based on S5Pv210 SoC: DRM Rotator, FIMD, PWM vibrator,
power off, touchscreen, Broadcom BCM4329 Bluetooth and cpufreq.
2. Remove hardcoded bootargs on Galaxy S family (proper support in
U-Boot).
3. Fix minor DTC warnings.
4. Fix Exynos4412 Odroid X2/U3 conflicting eMMC GPIO settings and regulator
properties.
5. Fix the eMMC RTSN pin breaking proper reboot on X2.
* tag 'samsung-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3
ARM: dts: exynos: Fix eMMC regulator properties on Odroid U3 boards
ARM: dts: exynos: Fix conflicting fixed-regulator GPIO flags and properties
ARM: dts: s3c2416: Fix xti node's missing reg property warning
ARM: dts: s5pv210: Fix onenand's unit address format warning
ARM: dts: s5pv210: Add DMC nodes
ARM: dts: s5pv210: Add support for more devices present on Aries
ARM: dts: s5pv210: Add reserved memory for MFC on Aries
ARM: dts: s5pv210: Remove hardcoded bootargs on Galaxy S and Fascinate 4G
ARM: dts: s5pv210: Use correct fimd variant
ARM: dts: s5pv210: Add node for exynos-rotator
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
improvements for rv1108 as well. RK3066 got support for the core
display components and the Edison tablet got its touchscreen added.
Apart from that a wider fix to drop display-wp usage from places where
it shouldn't be used, a pin fix for Edison and a cleanup to prevent
rk3036 board from defining sound-dai-cells for core components in
each board separately.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlxTAPIQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgYbQCACiWIYVLrOwOPSgDo3xRFygo2Bmlo2EncEz
UZM0z3gQpzQ8go7Ms6eqL7qRoMI14Cc3XT6dNkzjRBIBaJAi3LXy1G4CLMzxuurD
qri6shmJv94TfBNISJ9FOQYqJRxSK1z4ncp6iXNeOgOa9NCkqSXkHTOve8oVAxfj
nBnMAA0kkX/haF4pNaLoDUv3ppMi7UHjAuoyJMNaTFqVG9qjR1DPNBnCGdYZGacU
Xkb/9n/QOLsJc/yoMcUno+Q5tUVkLsxQVhsApf9Tf7Hd76WV0dgIzi0hENvoKJjK
TwfHz26NyNzw9KbX5YJmNGUAbgesjVBx5AXJk+pBZvrBWGUDtixE
=VDwG
-----END PGP SIGNATURE-----
Merge tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New board the Elgin-R1 based on the rv1108 soc and a number of small
improvements for rv1108 as well. RK3066 got support for the core
display components and the Edison tablet got its touchscreen added.
Apart from that a wider fix to drop display-wp usage from places where
it shouldn't be used, a pin fix for Edison and a cleanup to prevent
rk3036 board from defining sound-dai-cells for core components in
each board separately.
* tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: clean up the abuse of disable-wp
ARM: dts: rv1108: Add support for rv1108-elgin-r1 board
dt-bindings: Add vendor prefix for elgin
ARM: dts: rockchip: rv1108: Add spim0 and spim1 pinctrl groups
ARM: dts: rockchip: Add missing dma-names SPI support for rv1108
ARM: dts: rockchip: add rk3066 vop display nodes
ARM: dts: rockchip: add focaltech touchscreen to rk3188-bqedison2qc
ARM: dts: rockchip: fix cif1_pdn pin on rk3188-bqedison2qc
ARM: dts: rockchip: add HCLK_HDMI to rk3066 vio power-domain
ARM: dts: rockchip: move rk3036 i2s sound-dail-cells into soc dtsi
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mic input on da850 LCDK board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6oqi
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v5.1/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt
DaVinci device-tree updates for v5.1 contains a patch to enable analog
mic input on da850 LCDK board.
* tag 'davinci-for-v5.1/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lcdk: Enable the analog mic input
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This series contains board specific dts updates and few minor
clean-up changes:
- add stdout-path for am335x-chiliboard
- add wlcore wakeirq for omap3-evm, pandaboard and omap4-droid4
- remove unnecessary address-cells and io-cells for am33xx
- replace deprecated linux,wakeup with wakeup-source property
- use spdx license for am335x-shc
- configure ethernet pins for omap4-sdp
-----BEGIN PGP SIGNATURE-----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=6JIq
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
dts updates for omap variants for v5.1 merge window
This series contains board specific dts updates and few minor
clean-up changes:
- add stdout-path for am335x-chiliboard
- add wlcore wakeirq for omap3-evm, pandaboard and omap4-droid4
- remove unnecessary address-cells and io-cells for am33xx
- replace deprecated linux,wakeup with wakeup-source property
- use spdx license for am335x-shc
- configure ethernet pins for omap4-sdp
* tag 'omap-for-v5.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-sdp: Make ethernet working even if booted with latest u-boot
ARM: dts: am335x-shc.dts: Switch to SPDX identifier
ARM: dts: am437x: replace linux,wakeup with wakeup-source property
ARM: dts: am33xx: Remove unnecessary properties
ARM: dts: omap4-droid4: Configure wlcore wakeirq
ARM: dts: Configure wlcore wakeirq for pandaboard
ARM: dts: Add wlcore wakeirq for omap3-evm
ARM: dts: am335x-chiliboard: Add stdout-path property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
