IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit dcde4e97b122ac318aaa71e8bcd2857dc28a0d12 ]
This partially reverts
commit e7c304c0346d ("riscv: dts: starfive: jh7110: add the node and pins configuration for tdm")
This added device tree nodes for TDM hardware that is not actually on the
VisionFive 2 board, but connected on the 40pin header. Many different extension
boards could be added on those pins, so this should be handled by overlays
instead.
This also conflicts with the I2S node which also attempts to grab GPIO 44:
starfive-jh7110-sys-pinctrl 13040000.pinctrl: pin GPIO44 already requested by 10090000.tdm; cannot claim for 120c0000.i2s
Fixes: e7c304c0346d ("riscv: dts: starfive: jh7110: add the node and pins configuration for tdm")
Signed-off-by: Hannah Peuckmann <hannah.peuckmann@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e07230da0500e0919a765037c5e81583b519be2c ]
ioctl(F2FS_IOC_MOVE_RANGE) can truncate or punch hole on pinned file,
fix to disallow it.
Fixes: 5fed0be8583f ("f2fs: do not allow partial truncation on pinned file")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 278a6253a673611dbc8ab72a3b34b151a8e75822 ]
compress and pinfile flag should be checked after inode lock held to
avoid race condition, fix it.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Fixes: 5fed0be8583f ("f2fs: do not allow partial truncation on pinned file")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd9ae4ae9e585061acfd4a169f2321706f900246 ]
Compress flag should be checked after inode lock held to avoid
racing w/ f2fs_setflags_common() , fix it.
Fixes: 5fdb322ff2c2 ("f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE")
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/CAHJ8P3LdZXLc2rqeYjvymgYHr2+YLuJ0sLG9DdsJZmwO7deuhw@mail.gmail.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c5dffb3d90c5921b91981cc663e02757d90526e ]
Compress flag should be checked after inode lock held to avoid
racing w/ f2fs_setflags_common(), fix it.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/CAHJ8P3LdZXLc2rqeYjvymgYHr2+YLuJ0sLG9DdsJZmwO7deuhw@mail.gmail.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 459fee7b508231cd4622b3bd94aaa85e8e16b888 ]
bpf_program__attach_uprobe_opts will search LD_LIBRARY_PATH and so
specifying `/lib64` is unnecessary and causes failures for libc.so.6
paths like `/lib/x86_64-linux-gnu/libc.so.6`.
Fixes: 7b47623b8cae8149 ("perf bench uprobe trace_printk: Add entry attaching an BPF program that does a trace_printk")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240406040911.1603801-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b952f96a57e6fb4528c1d6be19e941c3322f9905 ]
Support regulators found on the KingFisher board for miniPCIe (1.5 and
3.3v). For completeness, describe a 12v regulator while we are here.
Link: https://lore.kernel.org/linux-pci/20231105092908.3792-2-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Stable-dep-of: 78d212851f0e ("dt-bindings: PCI: rcar-pci-host: Add missing IOMMU properties")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 792bc998baf9ae17297b1f93b1edc3ca34a0b7e2 ]
evlist__config() might mess up the debug output consumed by test
"Test per-thread recording" in "Miscellaneous Intel PT testing".
Move it out from between the debug prints:
"perf record opening and mmapping events" and
"perf record done opening and mmapping events"
Fixes: da4062021e0e6da5 ("perf tools: Add debug messages and comments for testing")
Closes: https://lore.kernel.org/linux-perf-users/ZhVfc5jYLarnGzKa@x1/
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240411075447.17306-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1285ab300d598ead593b190af65a16f4b0843c68 ]
User space tasks can migrate between CPUs, so when tracing selected CPUs,
sideband for all CPUs is needed. In this case set the cpu map of the evsel
to all online CPUs. This may modify the original cpu map of the evlist.
Therefore, need to check whether the preceding scenario exists before
record__init_thread_masks().
Dummy tracking has been set in record__open(), move it before
record__init_thread_masks() and add a helper for unified processing.
The sys_perf_event_open invoked is as follows:
# perf --debug verbose=3 record -e cpu-clock -D 100 true
<SNIP>
Opening: cpu-clock
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0 (PERF_COUNT_SW_CPU_CLOCK)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD|IDENTIFIER
read_format ID|LOST
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid 10318 cpu 0 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 10318 cpu 1 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid 10318 cpu 2 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid 10318 cpu 3 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid 10318 cpu 4 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid 10318 cpu 5 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid 10318 cpu 6 group_fd -1 flags 0x8 = 12
sys_perf_event_open: pid 10318 cpu 7 group_fd -1 flags 0x8 = 13
Opening: dummy:u
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x9 (PERF_COUNT_SW_DUMMY)
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|IDENTIFIER
read_format ID|LOST
disabled 1
inherit 1
exclude_kernel 1
exclude_hv 1
mmap 1
comm 1
enable_on_exec 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
sys_perf_event_open: pid 10318 cpu 0 group_fd -1 flags 0x8 = 14
sys_perf_event_open: pid 10318 cpu 1 group_fd -1 flags 0x8 = 15
sys_perf_event_open: pid 10318 cpu 2 group_fd -1 flags 0x8 = 16
sys_perf_event_open: pid 10318 cpu 3 group_fd -1 flags 0x8 = 17
sys_perf_event_open: pid 10318 cpu 4 group_fd -1 flags 0x8 = 18
sys_perf_event_open: pid 10318 cpu 5 group_fd -1 flags 0x8 = 19
sys_perf_event_open: pid 10318 cpu 6 group_fd -1 flags 0x8 = 20
sys_perf_event_open: pid 10318 cpu 7 group_fd -1 flags 0x8 = 21
<SNIP>
'perf test' needs to update base-record & system-wide-dummy attr expected values
for test-record-C0:
1. Because a dummy sideband event is added to the sampling of specified
CPUs. When evlist contains evsel of different sample_type,
evlist__config() will change the default PERF_SAMPLE_ID bit to
PERF_SAMPLE_IDENTIFICATION bit.
The attr sample_type expected value of base-record and system-wide-dummy
in test-record-C0 needs to be updated.
2. The perf record uses evlist__add_aux_dummy() instead of
evlist__add_dummy() to add a dummy event.
The expected value of system-wide-dummy attr needs to be updated.
The 'perf test' result is as follows:
# ./perf test list 2>&1 | grep 'Setup struct perf_event_attr'
17: Setup struct perf_event_attr
# ./perf test 17
17: Setup struct perf_event_attr : Ok
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230904023340.12707-4-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 792bc998baf9 ("perf record: Fix debug message placement for test consumption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c95e4ef065723496442898614d09a9a916eab81 ]
Currently, intel-bts, intel-pt, and arm-spe may add tracking event to the
evlist. We may need to search for the tracking event for some settings.
Therefore, add evlist__findnew_tracking_event() helper.
If system_wide is true, evlist__findnew_tracking_event() set the cpu map
of the evsel to all online CPUs.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230904023340.12707-3-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 792bc998baf9 ("perf record: Fix debug message placement for test consumption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dade41a533f337447b945239b87ff31a8857890 ]
PERF_PMU_CAP_EXTENDED_HW_TYPE results in multiple events being opened on
heterogeneous systems. Currently this test only sets its required
attributes on the first event. Not disabling enable_on_exec on the other
events causes the test to fail because the forked objdump processes are
sampled. No tracking event is opened so Perf only knows about its own
mappings causing the objdump samples to give the following error:
$ perf test -vvv "object code reading"
Reading object code for memory address: 0xffff9aaa55ec
thread__find_map failed
---- end(-1) ----
24: Object code reading : FAILED!
Fixes: 251aa040244a3b17 ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Link: https://lore.kernel.org/r/20240410103458.813656-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 256ef072b3842273ce703db18b603b051aca95fe ]
To prevent anyone from seeing a test failure appear as a regression and
thinking that it was caused by their code change, insert some noise into
the loop which makes it immune to sampling bias issues (errata 1694299).
The "test data symbol" test can fail with any unrelated change that
shifts the loop into an unfortunate position in the Perf binary which is
almost impossible to debug as the root cause of the test failure.
Ultimately it's caused by the referenced errata.
Fixes: 60abedb8aa902b06 ("perf test: Introduce script for data symbol testing")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Link: https://lore.kernel.org/r/20240410103458.813656-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72907de9051dc2aa7b55c2a020e2872184ac17cd ]
The power-controller module works well by adding its parent
node secure-monitor.
Fixes: 085f7a298a14 ("arm64: dts: add support for S4 power domain controller")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240412-fix-secpwr-s4-v2-1-3802fd936d77@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 230d05b1179f6ce6f8dc8a2b99eba92799ac22d7 ]
The value was wrong, resulting in misprogramming of the hardware.
Fix it.
Fixes: 1a14b1ac3935 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240326-topic-rpm_icc_qos_cleanup-v1-2-357e736792be@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85d2b0aa170351380be39fe4ff7973df1427fe76 ]
The sysfs_create_link() return code is marked as __must_check, but the
module_add_driver() function tries hard to not care, by assigning the
return code to a variable. When building with 'make W=1', gcc still
warns because this variable is only assigned but not used:
drivers/base/module.c: In function 'module_add_driver':
drivers/base/module.c:36:6: warning: variable 'no_warn' set but not used [-Wunused-but-set-variable]
Rework the code to properly unwind and return the error code to the
caller. My reading of the original code was that it tries to
not fail when the links already exist, so keep ignoring -EEXIST
errors.
Fixes: e17e0f51aeea ("Driver core: show drivers in /sys/module/")
See-also: 4a7fb6363f2d ("add __must_check to device management code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240408080616.3911573-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a8e4ab0c93fad30769479f86849e22d63cd0e12 ]
Replace incorrect include with the proper one for sched_set_fifo()
declaration.
Fixes: 28d2f209cd16 ("sched,serial: Convert to sched_set_fifo()")
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240409154253.3043822-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19326006a21da26532d982254677c892dae8f29b ]
Tegra194 PCIe probe path is taking failure path in success case for
Endpoint mode. Return success from the switch case instead of going
into the failure path.
Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Link: https://lore.kernel.org/linux-pci/20240408093053.3948634-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a0b8c0da8d8d418cde6894a104cf74e6098ddfa ]
The arche-ctrl has two platform drivers and three of_device_id tables,
but one table is only used for the the module loader, while the other
two seem to be associated with their drivers.
This leads to a W=1 warning when the driver is built-in:
drivers/staging/greybus/arche-platform.c:623:34: error: 'arche_combined_id' defined but not used [-Werror=unused-const-variable=]
623 | static const struct of_device_id arche_combined_id[] = {
Drop the extra table and register both tables that are actually
used as the ones for the module loader instead.
Fixes: 7b62b61c752a ("greybus: arche-ctrl: Don't expose driver internals to arche-platform driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-18-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e60955dbecb97f080848a57524827e2db29c70fd ]
Sparse is not happy about misuse of bitwise types:
.../max3100.c:194:13: warning: incorrect type in assignment (different base types)
.../max3100.c:194:13: expected unsigned short [addressable] [usertype] etx
.../max3100.c:194:13: got restricted __be16 [usertype]
.../max3100.c:202:15: warning: cast to restricted __be16
Fix this by choosing proper types for the respective variables.
Fixes: 7831d56b0a35 ("tty: MAX3100")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240402195306.269276-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 712a1fcb38dc7cac6da63ee79a88708fbf9c45ec ]
The removal of the last MAX3100 device triggers the removal of
the driver. However, code doesn't update the respective global
variable and after insmod — rmmod — insmod cycle the kernel
oopses:
max3100 spi-PRP0001:01: max3100_probe: adding port 0
BUG: kernel NULL pointer dereference, address: 0000000000000408
...
RIP: 0010:serial_core_register_port+0xa0/0x840
...
max3100_probe+0x1b6/0x280 [max3100]
spi_probe+0x8d/0xb0
Update the actual state so next time UART driver will be registered
again.
Hugo also noticed, that the error path in the probe also affected
by having the variable set, and not cleared. Instead of clearing it
move the assignment after the successfull uart_register_driver() call.
Fixes: 7831d56b0a35 ("tty: MAX3100")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240402195306.269276-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77ab53371a2066fdf9b895246505f5ef5a4b5d47 ]
uart_handle_cts_change() has to be called with port lock taken,
Since we run it in a separate work, the lock may not be taken at
the time of running. Make sure that it's taken by explicitly doing
that. Without it we got a splat:
WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0
...
Workqueue: max3100-0 max3100_work [max3100]
RIP: 0010:uart_handle_cts_change+0xa6/0xb0
...
max3100_handlerx+0xc5/0x110 [max3100]
max3100_work+0x12a/0x340 [max3100]
Fixes: 7831d56b0a35 ("tty: MAX3100")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240402195306.269276-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaf494cf483a1a835c44e942861429b30a00cab0 ]
It should pass a proper address (i.e. suitable for objdump or addr2line)
to get_srcline() in order to work correctly. It used to pass an address
with map__rip_2objdump() as the second argument but later it's changed
to use notes->start. It's ok in normal cases but it can be changed when
annotate_opts.full_addr is set. So let's convert the address directly
instead of using the notes->start.
Also the last argument is an IP to print symbol offset if requested. So
it should pass symbol-relative address.
Fixes: 7d18a824b5e57ddd ("perf annotate: Toggle full address <-> offset display")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240404175716.1225482-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41fd3cacd29f47f6b9c6474b27c5b0513786c4e9 ]
Now it can directly use the global options and no need to pass it as an
argument.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231128175441.721579-5-namhyung@kernel.org
[ Fixup build with GTK2=1 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aaf494cf483a ("perf annotate: Fix annotation_calc_lines() to pass correct address to get_srcline()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9a21a872c69032cb9a94ebc171649c0c28141d7 ]
Use the global option and drop the local copy.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231128175441.721579-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aaf494cf483a ("perf annotate: Fix annotation_calc_lines() to pass correct address to get_srcline()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14953f038d6b30e3dc9d1aa4d4584ac505e5a8ec ]
Use the global option and drop the local copy.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231128175441.721579-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aaf494cf483a ("perf annotate: Fix annotation_calc_lines() to pass correct address to get_srcline()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d03194a36345796d4f0f8d6b72eb770a45d614e ]
The annotation options are to control the behavior of objdump and the
output. It's basically used by 'perf annotate' but 'perf report' and
'perf top' can call it on TUI dynamically.
But it doesn't need to have a copy of annotation options in many places.
As most of the work is done in the util/annotate.c file, add a global
variable and set/use it instead of having their own copies.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231128175441.721579-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aaf494cf483a ("perf annotate: Fix annotation_calc_lines() to pass correct address to get_srcline()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de2c7eb59c342d1a61124caaf2993e325a9becb7 ]
The cycles info is used only when branch stack is provided. Separate
them from 'struct annotation_line' into a separate struct and lazy
allocate them to save some memory.
Committer notes:
Make annotation__compute_ipc() check if the lazy allocation works,
bailing out if so, its callers already do error checking and
propagation.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231103191907.54531-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aaf494cf483a ("perf annotate: Fix annotation_calc_lines() to pass correct address to get_srcline()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ffa6c7512ca7aaeb30e596e2c247cb1fae7123a ]
'struct thread' values hold onto references to mmaps, DSOs, etc. When a
thread exits it is necessary to clean all of this memory up by removing
the thread from the machine's threads. Some tools require this doesn't
happen, such as auxtrace events, 'perf report' if offcpu events exist or
if a task list is being generated, so add a 'struct symbol_conf' member
to make the behavior optional. When an exited thread is left in the
machine's threads, mark it as exited.
This change relates to commit 40826c45eb0b8856 ("perf thread: Remove
notion of dead threads") . Dead threads were removed as they had a
reference count of 0 and were difficult to reason about with the
reference count checker. Here a thread is removed from threads when it
exits, unless via symbol_conf the exited thread isn't remove and is
marked as exited. Reference counting behaves as it normally does.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Li Dong <lidong@vivo.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231102175735.2272696-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aaf494cf483a ("perf annotate: Fix annotation_calc_lines() to pass correct address to get_srcline()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a27fc01700fbff2f205000edf0d1d315b5f85cc ]
Commit 5b7ba82a75915e73 ("perf symbols: Load kernel maps before using")
changed it so that loading a kernel DSO would cause the symbols for the
DSO to be eagerly loaded.
For 'perf record' this is overhead as the symbols won't be used. Add a
field to 'struct symbol_conf' to control the behavior and disable it for
'perf record' and 'perf inject'.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Li Dong <lidong@vivo.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231102175735.2272696-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aaf494cf483a ("perf annotate: Fix annotation_calc_lines() to pass correct address to get_srcline()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf770af5645a41a753c55a053fa1237105b0964a ]
dmi_class uses kfree() as the .release function, but that now causes
a warning with clang-16 as it violates control flow integrity (KCFI)
rules:
drivers/firmware/dmi-id.c:174:17: error: cast from 'void (*)(const void *)' to 'void (*)(struct device *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
174 | .dev_release = (void(*)(struct device *)) kfree,
Add an explicit function to call kfree() instead.
Fixes: 4f5c791a850e ("DMI-based module autoloading")
Link: https://lore.kernel.org/lkml/20240213100238.456912-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b1c1cf08a0addb6df42f16b37133dc7a351de29 ]
As the possible failure of the dma_set_max_seg_size(), it should be
better to check the return value of the dma_set_max_seg_size().
Fixes: e3fdb1894cfa ("dmaengine: idma64: set maximum allowed segment size for DMA")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240403024932.3342606-1-nichen@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ee1b439b1540ae543149b15a2a61b9dff937d91 ]
For some reason, we add an offset to the PDI, presumably to skip the
PDI0 and PDI1 which are reserved for BPT.
This code is however completely wrong and leads to an out-of-bounds
access. We were just lucky so far since we used only a couple of PDIs
and remained within the PDI array bounds.
A Fixes: tag is not provided since there are no known platforms where
the out-of-bounds would be accessed, and the initial code had problems
as well.
A follow-up patch completely removes this useless offset.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240326090122.1051806-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2f3d7dfc7373d53286f2a5c882d3397a5070adc ]
On s390 z/VM virtual machines command 'perf list' also displays metrics:
# perf list | grep -A 20 'Metric Groups:'
Metric Groups:
No_group:
cpi
[Cycles per Instruction]
est_cpi
[Estimated Instruction Complexity CPI infinite Level 1]
finite_cpi
[Cycles per Instructions from Finite cache/memory]
l1mp
[Level One Miss per 100 Instructions]
l2p
[Percentage sourced from Level 2 cache]
l3p
[Percentage sourced from Level 3 on same chip cache]
l4lp
[Percentage sourced from Level 4 Local cache on same book]
l4rp
[Percentage sourced from Level 4 Remote cache on different book]
memp
[Percentage sourced from memory]
....
#
The command
# perf stat -M cpi -- true
event syntax error: '{CPU_CYCLES/metric-id=CPU_CYCLES/.....'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'CPU_CYCLES'
event syntax error: '{CPU_CYCLES/metric-id=CPU_CYCLES/...'
\___ Cannot find PMU `CPU_CYCLES'.
Missing kernel support?
#
fails. 'perf stat' should not fail on metrics when the referenced CPU
Counter Measurement PMU is not available.
Output after:
# perf stat -M est_cpi -- sleep 1
Performance counter stats for 'sleep 1':
1,000,887,494 ns duration_time # 0.00 est_cpi
1.000887494 seconds time elapsed
0.000143000 seconds user
0.000662000 seconds sys
#
Fixes: 7f76b31130680fb3 ("perf list: Add IBM z16 event description for s390")
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20240404064806.1362876-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41e1cd1401fcd1f1ae9e47574af2d9fc44a870b3 ]
In a way similar to the previous commit, move
typec_partner_set_usb_power_delivery() to be called after reading the PD
caps. This also removes calls to
usb_power_delivery_unregister_capabilities() from the error path. Keep
all capabilities registered until they are cleared by
ucsi_unregister_partner_pdos().
Fixes: b04e1747fbcc ("usb: typec: ucsi: Register USB Power Delivery Capabilities")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-5-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0f66d78f42353d38b9608c05f211cf0773d93ac ]
UCSI driver will attempt to set a USB PD device only if it was able to
read PDOs from the firmware. This results in suboptimal behaviour, since
the PD device will be created anyway. Move calls to
typec_port_set_usb_power_delivery() out of conditional code and call it
after reading capabilities.
Fixes: b04e1747fbcc ("usb: typec: ucsi: Register USB Power Delivery Capabilities")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-4-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 374af9f1f06b5e991c810d2e4983d6f58df32136 ]
The options array in cmd_annotate() has duplicate --group options. It
only needs one and let's get rid of the other.
$ perf annotate -h 2>&1 | grep group
--group Show event group information together
--group Show event group information together
Fixes: 7ebaf4890f63eb90 ("perf annotate: Support '--group' option")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240322224313.423181-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 416bdb89605d960405178b9bf04df512d1ace1a3 ]
Remove the @priv: line to prevent the kernel-doc warning:
include/linux/counter.h:400: warning: Excess struct member 'priv' description in 'counter_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: f2ee4759fb70 ("counter: remove old and now unused registration API")
Link: https://lore.kernel.org/r/20231223050511.13849-1-rdunlap@infradead.org
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1da11f822042eb6ef4b6064dc048f157a7852529 ]
The current implementation of the fpga bridge assumes that the low-level
module registers a driver for the parent device and uses its owner pointer
to take the module's refcount. This approach is problematic since it can
lead to a null pointer dereference while attempting to get the bridge if
the parent device does not have a driver.
To address this problem, add a module owner pointer to the fpga_bridge
struct and use it to take the module's refcount. Modify the function for
registering a bridge to take an additional owner module parameter and
rename it to avoid conflicts. Use the old function name for a helper macro
that automatically sets the module that registers the bridge as the owner.
This ensures compatibility with existing low-level control modules and
reduces the chances of registering a bridge without setting the owner.
Also, update the documentation to keep it consistent with the new interface
for registering an fpga bridge.
Other changes: opportunistically move put_device() from __fpga_bridge_get()
to fpga_bridge_get() and of_fpga_bridge_get() to improve code clarity since
the bridge device is taken in these functions.
Fixes: 21aeda950c5f ("fpga: add fpga bridge framework")
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Russ Weight <russ.weight@linux.dev>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240322171839.233864-1-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d4d2d4346857bf778fafaa97d6f76bb1663e3c9 ]
The current implementation of the fpga manager assumes that the low-level
module registers a driver for the parent device and uses its owner pointer
to take the module's refcount. This approach is problematic since it can
lead to a null pointer dereference while attempting to get the manager if
the parent device does not have a driver.
To address this problem, add a module owner pointer to the fpga_manager
struct and use it to take the module's refcount. Modify the functions for
registering the manager to take an additional owner module parameter and
rename them to avoid conflicts. Use the old function names for helper
macros that automatically set the module that registers the manager as the
owner. This ensures compatibility with existing low-level control modules
and reduces the chances of registering a manager without setting the owner.
Also, update the documentation to keep it consistent with the new interface
for registering an fpga manager.
Other changes: opportunistically move put_device() from __fpga_mgr_get() to
fpga_mgr_get() and of_fpga_mgr_get() to improve code clarity since the
manager device is taken in these functions.
Fixes: 654ba4cc0f3e ("fpga manager: ensure lifetime with of_fpga_mgr_get")
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240305192926.84886-1-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33e62cd7b4c281cd737c62e5d8c4f0e602a8c5c5 ]
As reported by Yi Zhang in mailing list [1], kernel warning was catched
during zbd/010 test as below:
./check zbd/010
zbd/010 (test gap zone support with F2FS) [failed]
runtime ... 3.752s
something found in dmesg:
[ 4378.146781] run blktests zbd/010 at 2024-02-18 11:31:13
[ 4378.192349] null_blk: module loaded
[ 4378.209860] null_blk: disk nullb0 created
[ 4378.413285] scsi_debug:sdebug_driver_probe: scsi_debug: trim
poll_queues to 0. poll_q/nr_hw = (0/1)
[ 4378.422334] scsi host15: scsi_debug: version 0191 [20210520]
dev_size_mb=1024, opts=0x0, submit_queues=1, statistics=0
[ 4378.434922] scsi 15:0:0:0: Direct-Access-ZBC Linux
scsi_debug 0191 PQ: 0 ANSI: 7
[ 4378.443343] scsi 15:0:0:0: Power-on or device reset occurred
[ 4378.449371] sd 15:0:0:0: Attached scsi generic sg5 type 20
[ 4378.449418] sd 15:0:0:0: [sdf] Host-managed zoned block device
...
(See '/mnt/tests/gitlab.com/api/v4/projects/19168116/repository/archive.zip/storage/blktests/blk/blktests/results/nodev/zbd/010.dmesg'
WARNING: CPU: 22 PID: 44011 at fs/iomap/iter.c:51
CPU: 22 PID: 44011 Comm: fio Not tainted 6.8.0-rc3+ #1
RIP: 0010:iomap_iter+0x32b/0x350
Call Trace:
<TASK>
__iomap_dio_rw+0x1df/0x830
f2fs_file_read_iter+0x156/0x3d0 [f2fs]
aio_read+0x138/0x210
io_submit_one+0x188/0x8c0
__x64_sys_io_submit+0x8c/0x1a0
do_syscall_64+0x86/0x170
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Shinichiro Kawasaki helps to analyse this issue and proposes a potential
fixing patch in [2].
Quoted from reply of Shinichiro Kawasaki:
"I confirmed that the trigger commit is dbf8e63f48af as Yi reported. I took a
look in the commit, but it looks fine to me. So I thought the cause is not
in the commit diff.
I found the WARN is printed when the f2fs is set up with multiple devices,
and read requests are mapped to the very first block of the second device in the
direct read path. In this case, f2fs_map_blocks() and f2fs_map_blocks_cached()
modify map->m_pblk as the physical block address from each block device. It
becomes zero when it is mapped to the first block of the device. However,
f2fs_iomap_begin() assumes that map->m_pblk is the physical block address of the
whole f2fs, across the all block devices. It compares map->m_pblk against
NULL_ADDR == 0, then go into the unexpected branch and sets the invalid
iomap->length. The WARN catches the invalid iomap->length.
This WARN is printed even for non-zoned block devices, by following steps.
- Create two (non-zoned) null_blk devices memory backed with 128MB size each:
nullb0 and nullb1.
# mkfs.f2fs /dev/nullb0 -c /dev/nullb1
# mount -t f2fs /dev/nullb0 "${mount_dir}"
# dd if=/dev/zero of="${mount_dir}/test.dat" bs=1M count=192
# dd if="${mount_dir}/test.dat" of=/dev/null bs=1M count=192 iflag=direct
..."
So, the root cause of this issue is: when multi-devices feature is on,
f2fs_map_blocks() may return zero blkaddr in non-primary device, which is
a verified valid block address, however, f2fs_iomap_begin() treats it as
an invalid block address, and then it triggers the warning in iomap
framework code.
Finally, as discussed, we decide to use a more simple and direct way that
checking (map.m_flags & F2FS_MAP_MAPPED) condition instead of
(map.m_pblk != NULL_ADDR) to fix this issue.
Thanks a lot for the effort of Yi Zhang and Shinichiro Kawasaki on this
issue.
[1] https://lore.kernel.org/linux-f2fs-devel/CAHj4cs-kfojYC9i0G73PRkYzcxCTex=-vugRFeP40g_URGvnfQ@mail.gmail.com/
[2] https://lore.kernel.org/linux-f2fs-devel/gngdj77k4picagsfdtiaa7gpgnup6fsgwzsltx6milmhegmjff@iax2n4wvrqye/
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/CAHj4cs-kfojYC9i0G73PRkYzcxCTex=-vugRFeP40g_URGvnfQ@mail.gmail.com/
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 1517c1a7a445 ("f2fs: implement iomap operations")
Fixes: 8d3c1fa3fa5e ("f2fs: don't rely on F2FS_MAP_* in f2fs_iomap_begin")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1ba19a1ae7cd1e324685ded4ab563e78fe68648 ]
If channel for the given node is not found we return null from
get_channel_from_mode. Make sure we validate the return pointer
before using it in two of the missing places.
This was originally reported in [0]:
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[0] https://lore.kernel.org/all/20240301190425.120605-1-m.lobanov@rosalinux.ru
Fixes: 2870b52bae4c ("greybus: lights: add lights implementation")
Reported-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Suggested-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Suggested-by: Alex Elder <elder@ieee.org>
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Link: https://lore.kernel.org/r/20240325221549.2185265-1-rmfrfs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0245ab389330cbc1d187e358a5b890d9f5383db ]
In iio_device_alloc() when size of the private data is 0,
the private pointer is calculated to point behind the valid data.
Leave it NULL when no private data supplied.
Fixes: 6d4ebd565d15 ("iio: core: wrap IIO device into an iio_dev_opaque object")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240304140650.977784-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 581037151910126a7934e369e4b6ac70eda9a703 ]
This prototype is obtained indirectly, by luck, from some other header
in probe-event.c in most systems, but recently exploded on alpine:edge:
8 13.39 alpine:edge : FAIL gcc version 13.2.1 20240309 (Alpine 13.2.1_git20240309)
util/probe-event.c: In function 'convert_exec_to_group':
util/probe-event.c:225:16: error: implicit declaration of function 'basename' [-Werror=implicit-function-declaration]
225 | ptr1 = basename(exec_copy);
| ^~~~~~~~
util/probe-event.c:225:14: error: assignment to 'char *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
225 | ptr1 = basename(exec_copy);
| ^
cc1: all warnings being treated as errors
make[3]: *** [/git/perf-6.8.0/tools/build/Makefile.build:158: util] Error 2
Fix it by adding the libgen.h header where basename() is prototyped.
Fixes: fb7345bbf7fad9bf ("perf probe: Support basic dwarf-based operations on uprobe events")
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88ce0106a1f603bf360cb397e8fe293f8298fabb ]
The session has a header in it which contains a perf env with
bpf_progs. The bpf_progs are accessed by the sideband thread and so
the sideband thread must be stopped before the session is deleted, to
avoid a use after free. This error was detected by AddressSanitizer
in the following:
==2054673==ERROR: AddressSanitizer: heap-use-after-free on address 0x61d000161e00 at pc 0x55769289de54 bp 0x7f9df36d4ab0 sp 0x7f9df36d4aa8
READ of size 8 at 0x61d000161e00 thread T1
#0 0x55769289de53 in __perf_env__insert_bpf_prog_info util/env.c:42
#1 0x55769289dbb1 in perf_env__insert_bpf_prog_info util/env.c:29
#2 0x557692bbae29 in perf_env__add_bpf_info util/bpf-event.c:483
#3 0x557692bbb01a in bpf_event__sb_cb util/bpf-event.c:512
#4 0x5576928b75f4 in perf_evlist__poll_thread util/sideband_evlist.c:68
#5 0x7f9df96a63eb in start_thread nptl/pthread_create.c:444
#6 0x7f9df9726a4b in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
0x61d000161e00 is located 384 bytes inside of 2136-byte region [0x61d000161c80,0x61d0001624d8)
freed by thread T0 here:
#0 0x7f9dfa6d7288 in __interceptor_free libsanitizer/asan/asan_malloc_linux.cpp:52
#1 0x557692978d50 in perf_session__delete util/session.c:319
#2 0x557692673959 in __cmd_record tools/perf/builtin-record.c:2884
#3 0x55769267a9f0 in cmd_record tools/perf/builtin-record.c:4259
#4 0x55769286710c in run_builtin tools/perf/perf.c:349
#5 0x557692867678 in handle_internal_command tools/perf/perf.c:402
#6 0x557692867a40 in run_argv tools/perf/perf.c:446
#7 0x557692867fae in main tools/perf/perf.c:562
#8 0x7f9df96456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
Fixes: 657ee5531903339b ("perf evlist: Introduce side band thread")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240301074639.2260708-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68067f065ee730c7c67b361c3c81808d25d5a90b ]
Fix the issue where some Rx features cannot be changed.
When using ethtool -K to turn off rx offload, it returns error and
displays "Could not change any device features". And netdev->features
is not assigned a new value to actually configure the hardware.
Fixes: 6dbedcffcf54 ("net: libwx: Implement xx_set_features ops")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49217ea147df7647cb89161b805c797487783fc0 ]
In the cgroup v2 CPU subsystem, assuming we have a
cgroup named 'test', and we set cpu.max and cpu.max.burst:
# echo 1000000 > /sys/fs/cgroup/test/cpu.max
# echo 1000000 > /sys/fs/cgroup/test/cpu.max.burst
then we check cpu.max and cpu.max.burst:
# cat /sys/fs/cgroup/test/cpu.max
1000000 100000
# cat /sys/fs/cgroup/test/cpu.max.burst
1000000
Next we set cpu.max again and check cpu.max and
cpu.max.burst:
# echo 2000000 > /sys/fs/cgroup/test/cpu.max
# cat /sys/fs/cgroup/test/cpu.max
2000000 100000
# cat /sys/fs/cgroup/test/cpu.max.burst
1000
... we find that the cpu.max.burst value changed unexpectedly.
In cpu_max_write(), the unit of the burst value returned
by tg_get_cfs_burst() is microseconds, while in cpu_max_write(),
the burst unit used for calculation should be nanoseconds,
which leads to the bug.
To fix it, get the burst value directly from tg->cfs_bandwidth.burst.
Fixes: f4183717b370 ("sched/fair: Introduce the burstable CFS controller")
Reported-by: Qixin Liao <liaoqixin@huawei.com>
Signed-off-by: Cheng Yu <serein.chengyu@huawei.com>
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240424132438.514720-1-serein.chengyu@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
